summaryrefslogtreecommitdiff
path: root/src/mainboard/lenovo/x200/devicetree.cb
AgeCommit message (Collapse)Author
2021-10-17drivers/generic/ioapic: Drop enable_virtual_wireKyösti Mälkki
All boards with DRIVERS_GENERIC_IOAPIC select it. Presumably the related configuration of routing IRQ0 when IOAPIC is enabled should be always done to provide i8259 legacy compatibility for payloads. Change-Id: Ie87816271fa63bba892c8615aa5e72ee68f6ba93 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55287 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-06-16arch/x86/ioapic: Drop irq_on_fsb as a configurable itemKyösti Mälkki
APIC Serial Bus pins were removed with ICH5 already, so a choice 'irq_on_fsb = 0' would not take effect. The related register BOOT_CONFIG 0x3 is also not documented since ICH5. For emulation/qemu-q35 with ICH9 the choice INTERRUPT_ON_APIC_BUS was wrong and ignored as BOOT_CONFIG register emulation was never implemented. For ICH4 and earlier, the choice to use FSB can be made based on the installed CPU model but this is now just hardwired to match P4 CPUs of aopen/dxplplusu. For sb/intel/i82371eb register BOOT_CONFIG 0x3 is also not defined and the only possible operation mode there is APIC Serial Bus, which requires no configuration. Change-Id: Id433e0e67cb83b44a3041250481f307b2ed1ad18 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55257 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-29drivers/intel/gma/acpi: Provide default definition for displaysNico Huber
Use it wherever the standard numbers were copied to. Bit 31 is set at runtime unconditionally, so we don't need it here. Change-Id: I0d853c3b8250a2c7b2d1a91985a555e4b17ad76c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39731 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-07mb/lenovo/*/devicetree: Declare device in one line if possiblePeter Lemenkov
Change-Id: I708281f7861110e4abc02948c74affad9fa37053 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38732 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-10-28mb/lenovo/x200: Correct device tree override logicBill XIE
If a device node should be enabled on some variants, but disabled on others, it had better be declared as disabled (rather than absent) in base device tree (rather than override tree for the variant disabling it), and enabled in override tree for the variant needing it, so that it does not need to be declared once more when adding another variant with such node disabled. Change-Id: I4b28360905ae38149ace9ac5d21cd6d5045b7584 Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36347 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-10-20mb/lenovo/x200: Add ThinkPad X301 as a variantBill XIE
It is similar to X200s, with U-series CPU, slightly different gpio setup, no docking support, and no superio chip. Tested: - CPU Core 2 Duo U9400 - Slotted DIMM 4GiB*2 from samsung - Camera - pci-e slots - sata and usb2 - libgfxinit-based graphic init - NVRAM options for North and South bridges - Sound - Thinkpad EC - S3 - Linux 4.19.67-2 within Debian GNU/Linux stable, loaded from Linux payload (Heads) and Seabios. TODO: repurpose and/or rename flag H8_DOCK_EARLY_INIT (introduced in CB:4294 ) for h8-using devices without a dock. Change-Id: Ic6a6059ccf15dd2e43ed4fc490c1d3c36aa1e817 Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36093 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-10-14sb/intel/i82801ix: Add common code to set up LPC IO decode rangesArthur Heymans
This does the following: - Add gen[1-4]_dec options to the devicetree to set up generic LPC decode ranges in the southbridge code. - Move setting up some default decode ranges to a common place. If somehow a board needs to override this behavior it can happen in the mb_setup_superio() hook (that will be renamed when moving to C_ENVIRONMENT_BOOTBLOCK). Change-Id: I3d904b1125bc410c11aa73a89b1969284e88dac1 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35991 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-05-07mb/lenovo: Add SMBIOS type 9 for ExpressCardPatrick Rudolph
Mark all known PCIe root ports as ExpressCard slot. Tested on Lenovo T520. Change-Id: I43fb481512a54ee054c6fd0189053028fb3c3ec2 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32309 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-24mb/*/*/devicetree.cb: Move the ioapic device under the LPC bridgeArthur Heymans
This fixes spurious lines "child IOAPIC: 02 not a PCI device" and IOAPIC as leftover device. Change-Id: Id8010c84c45f0859508e7564c0eaa501904b7043 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/31041 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-06-14src: Get rid of unneeded whitespaceElyes HAOUAS
Change-Id: I630d49ab504d9f6e052806b516a600fa41b9a8da Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26991 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-09-11mb/lenovo/*/devicetree: Add BDC detection supportPatrick Rudolph
Add support for BDC detection, based on the schematics for each board. Support for boards without schematics needs further testing. Needs test on all boards. Change-Id: If33ef88fb808f36b050393fa83eb1b541ce936b9 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19810 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2016-10-26nb/gm45/gma.c: Remove writes to DP, FDI registersArthur Heymans
Those registers are only used on more recent Intel platforms featuring a PCH. The DP registers on G4X hardware are at a different offset. Change-Id: Ib49e54d4e7d6595dc09fb1be35ac8178b80c7f71 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17110 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-10-04nb/gm45: allow use of 352M preallocated ram for igdArthur Heymans
The datasheets on gm45: "Mobile Intel® 4 Series Express Chipset Family" mention the possibility of having 352M ram preallocated for the integrated graphic device. This only worked fine if the amount of ram in the system was 3GB or less. When 4G or more is installed, memory is remapped to create a 1GB large pci mmio hole which is not enough and creates conflicts when 352M vram is used. This patch increases the pci mmio hole size on Lenovo x200 to allow 352M vram to work. TEST: build and flash on target with 4GB ram or more, use nvramtool to set gfx_uma_size to 352M and reboot. Change-Id: I5ab066252339ac7d85149d91b09a9eaaaab3b5b6 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/16831 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-27lenovo/x200,t400: enable C4 cpu low power stateArthur Heymans
This enables the C4 low power state on the lenovo x200 and t400. It's inspired by the thread on the mailinglist: "[coreboot] Lenovo X200 running Coreboot drains 3-4W more power than with Vendor BIOS". What this does, is to enable a C3 state using MWAIT(C3) request and set the southbridge config c4onc3_enable to automatically upgrade C3 to the lower power C4 state. The latency (0x37) is the same value used by the vendor bios. With C4 enabled the idle power consumption is about ~2-3W lower. TEST= build and install on target. Use powertop top to measure power usage. To manually disable c-state to compare them, do (tested on linux 4.4): echo 1 > /sys/devices/system/cpu/cpu*/cpuidle/stateX/disable Change-Id: I1a1663a7662ebc7157a965667680688ad6a33545 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/15251 Tested-by: build bot (Jenkins) Reviewed-by: Swift Geek Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-06-12nb/intel/raminit (native): Read PCI mmio size from devicetreePatrick Rudolph
Instead of hardcoding the PCI mmio size read it from devicetree. Set a default value of 2048 MiB and 1024MiB for laptops without discrete graphics. Tested on Sandybridge Lenovo T520. Change-Id: I791ebd6897c5ba4e2e18bd307d320568b1378a13 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/15140 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-01-14mb/lenovo/x200: Add panel power sequence valuesNico Huber
Values are taken from the vendor BIOS of my X200s. Notable effect: Stops display from flashing during native graphics init / Linux mode setting. Change-Id: Ie5d9efc010a78dd46317b6bbdb7bfacc2c9d2cbf Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/12886 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-11Kill lvds_num_lanesVladimir Serbinenko
Only one value would work with corresponding gma code currently (which one depends on board). Going forward, it's possible to compute which number can be used, so there is no need to keep this info around. Change-Id: Iadc77ef94b02f892860e3ae8d70a0a792758565d Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/11862 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2015-10-11Derive lvds_dual_channel from EDID timings.Vladimir Serbinenko
Based on the info by Felix Held. Change-Id: Iab84dd8a0e3c942da20a6e21db5510e4ad16cadd Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/11857 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2015-05-28igd.asl rewriteVladimir Serbinenko
Old igd.asl had inconsistent addresses (between _DOD and actual device) and ghost devices. Any of those is enough to make brightness on windows fail and make igd.asl out-of-ACPI-spec. Also old code favoured ridiculous copying of the same thing 6 times per chipset. Leave only hooking up and chipset-specific part in chipset directory. Move NVS handling and ACPI-spec parts to a common file. Change-Id: I556769e5e28b83e7465e3db689e26c8c0ab44757 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7472 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2015-05-17lenovo/x200: Enable wacom digitizer support for x200tAlex David
This patch is based on commit f2b3cd63 (lenovo/x60: Support digitizer on X60t and X201t) Tested on Thinkpad X200 Tablet (7450): all pen functionallity works (i.e. movements, presure sensitivity and buttons) Change-Id: I9bd18642a6ea4211dc3be065456a507fc0b72561 Signed-off-by: Alex David <opdecirkel@gmail.com> Reviewed-on: http://review.coreboot.org/10208 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-02-15x86: Change MMIO addr in readN(addr)/writeN(addr, val) to pointerKevin Paul Herbert
On x86, change the type of the address parameter in read8()/read16/read32()/write8()/write16()/write32() to be a pointer, instead of unsigned long. Change-Id: Ic26dd8a72d82828b69be3c04944710681b7bd330 Signed-off-by: Kevin Paul Herbert <kph@meraki.net> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/7784 Tested-by: build bot (Jenkins)
2014-12-07x200/devicetree: Remove extraneous eventc.Vladimir Serbinenko
Change-Id: If72daed326216e24da85a6a9d342f36f4e1d9de5 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7685 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-11-19i82801ix,bd82x6x,ibexpeak: rewrite expresscard hotplugVladimir Serbinenko
This implementation is more compact, unified and works with windows as well. Tested under windows and under Debian GNU/Linux. Change-Id: I585dec12e17e22d829baa3f2dc7aecc174f9d3b5 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7296 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Nicolas Reinecke <nr@das-labor.org> Tested-by: build bot (Jenkins)
2014-09-13intel/gma: consolidate vbt codeVladimir Serbinenko
Change-Id: I80b7facfb9cc9f642dd1c766884dc23da1aab2c8 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6800 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-16lenovo/x200: Remove leftover roda rk9 devices.Vladimir Serbinenko
Change-Id: Ief3baa985cf83059255e64a8ab78cad9f8571199 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6688 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-16intel/gm45: native gfx init.Vladimir Serbinenko
Tested on lenovo X200 in both text and gfx mode. Change-Id: I273971d0f34ca3529959d4228e9516775459b806 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6682 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-14lenovo/x200: Fix black screen on quick boot.Vladimir Serbinenko
Otherwise without USB when coreboot boots too quickly EC is confused and thinks that LID is closed and so powers off the backlight until user flaps the lid. Change-Id: I14dfaa62582de83fd4c9f9518e9436b3a3035366 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6651 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2014-08-13lenovo/x200: New mainboard.Vladimir Serbinenko
Change-Id: I64e59648064d5875907b5057e2f9f72f2c5997b1 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6631 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-04 17:00:03 +0000