coreboot.git - my copy of coreboot

Age	Commit message (Collapse)	Author
2021-02-07	sb/intel/bd82x6x: Support ME Soft Temporary Disable Mode	Evgeny Zinoviev
	- Add support for ME Soft Temporary Disable Mode. In this mode, ME doesn't load its kernel and freezes at Bring UP (BUP) phase. This mode is saved in ME NVRAM (and thus will remain for next reboots and poweroffs). - Add support of new CMOS option for Sandy Bridge and Ivy Bridge ThinkPads. HOW TO USE To disable ME: 1. nvramtool -w me_state=Disabled 2. reboot To enable it back: 1. nvramtool -w me_state=Normal 2. reboot To check current status: intelmetool -m Tested on ThinkPad X230 and ThinkPad X220. BACKGROUND There's no Intel documentation that would explain how this should be implemented, in public. Working binary sequence for MKHI command to put ME in Soft Temporary Disable Mode, as well as a way to bring ME out of it (by writing to H_GS register), was found and published by researchers from PT Security: 1. To disable ME, BIOS issues the disable command (before End of Post) and reboots. ME is supposed to be disabled on the next boot after DID (DRAM Init Done). My numerous tests show that issuing the command and rebooting is not enough. If we reboot too early, ME will not be disabled. Apparently, it is doing something in background after receiving the command. It works with a delay of 500-1000 ms. I also tried to dump all known (documented) registers, such as GMES and HFS, before and during the next 2 seconds after execution of the disable command to find a possible indication that something's changed in ME and we're ready to reboot. Found nothing unfortunately. 2. To enable ME back, host writes value 0x20000000 to H_GS. PT slides don't contain any more information on it, but my tests show, that after writing this value, GMES[31:28] is changing from 0x01 (BUP phase) to 0x03 (Policy Module) to 0x06 (Host Communication). Then, after some more time, fw_init_complete bit of HFS becomes 1. This means that ME starts loading its kernel immediately, without reboot. On the other hand, Lenovo BIOS clearly perform a reboot after enabling it (one reboot after saving the settings, then ThinkPad logo appears, and then one more reboot). I'm assuming we have to reset too. Change-Id: Ic01526c9731cbef4e8552bbc352133a2415787c2 Signed-off-by: Evgeny Zinoviev <me@ch1p.io> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37115 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-11-23	mb/**/cmos.layout: Indent everything with tabs	Angel Pons
	Time has shown that using spaces never converges into proper alignment. Change-Id: I5338aeaf139580f9eab3e1e02cb910080a95d2c2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47147 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-11-23	mb/**/cmos.layout: Remove crusty comments	Angel Pons
	Most of these comments have been copy-pasted or serve no purpose other than to eventually turn into misleading info. While the description of the first 120 bits of CMOS could be useful, it should instead be added to the documentation for the CMOS option infrastructure, or /dev/null. Moreover, trim down newlines to no more than two consecutive newlines. Change-Id: I119b248821221e68c4e31edba71ba83b7d2e14e9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47143 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-05-18	src: Remove leading blank lines from SPDX header	Elyes HAOUAS
	Change-Id: I8a207e30a73d10fe67c0474ff11324ae99e2cec6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41360 Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11	treewide: Remove "this file is part of" lines	Patrick Georgi
	Stefan thinks they don't add value. Command used: sed -i -e '/file is part of /d' $(git grep "file is part of " \|egrep ":( /\.\/\$\|#\|;#\|-- \| \ )" \| cut -d: -f1 \|grep -v crossgcc \|grep -v gcov \| grep -v /elf.h \|grep -v nvramtool) The exceptions are for: - crossgcc (patch file) - gcov (imported from gcc) - elf.h (imported from GNU's libc) - nvramtool (more complicated header) The removed lines are: - fmt.Fprintln(f, "/* This file is part of the coreboot project. /") -# This file is part of a set of unofficial pre-commit hooks available -/ This file is part of coreboot / -# This file is part of msrtool. -/ This file is part of msrtool. / - This file is part of ncurses, designed to be appended after curses.h.in -/* This file is part of pgtblgen. / - This file is part of the coreboot project. - /* This file is part of the coreboot project. / -# This file is part of the coreboot project. -# This file is part of the coreboot project. -## This file is part of the coreboot project. --- This file is part of the coreboot project. -/ This file is part of the coreboot project / -/ This file is part of the coreboot project. / -;## This file is part of the coreboot project. -# This file is part of the coreboot project. It originated in the - This file is part of the coreinfo project. -## This file is part of the coreinfo project. - * This file is part of the depthcharge project. -/* This file is part of the depthcharge project. / -/ This file is part of the ectool project. / - This file is part of the GNU C Library. - * This file is part of the libpayload project. -## This file is part of the libpayload project. -/* This file is part of the Linux kernel. / -## This file is part of the superiotool project. -/ This file is part of the superiotool project / -/ This file is part of uio_usbdebug */ Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-09	src/: Replace GPL boilerplate with SPDX headers	Patrick Georgi
	Used commands: perl -i -p0e 's\|\/\[\s].is free software[:;][\s]you[\s]can[\s]redistribute[\s]it[\s]and\/or[\s]modify[\s]it[\s]under[\s]the[\s]terms[\s]of[\s]the[\s]GNU[\s]General[\s]Public[\s]License[\s]as[\s]published[\s]by[\s]the[\s]Free[\s]Software[\s]Foundation[;,][\s]version[\s]2[\s]of[\s]the[\s]License.[\s]This[\s]program[\s]is[\s]distributed[\s]in[\s]the[\s]hope[\s]that[\s]it[\s]will[\s]be[\s]useful,[\s]but[\s]WITHOUT[\s]ANY[\s]WARRANTY;[\s]without[\s]even[\s]the[\s]implied[\s]warranty[\s]of[\s]MERCHANTABILITY[\s]or[\s]FITNESS[\s]FOR[\s]A[\s]PARTICULAR[\s]PURPOSE.[\s]See[\s]the[\s]GNU[\s]General[\s]Public[\s]License[\s]for[\s]more[\s]details.[\s]\\/\|/ SPDX-License-Identifier: GPL-2.0-only /\|' $(cat filelist) perl -i -p0e 's\|\/\[\s].is[\s]free[\s]software[:;][\s]you[\s]can[\s]redistribute[\s]it[\s]and/or[\s]modify[\s]it[\s]under[\s]the[\s]terms[\s]of[\s]the[\s]GNU[\s]General[\s]Public[\s]License[\s]as[\s]published[\s]by[\s]the[\s]Free[\s]Software[\s]Foundation[;,][\s]either[\s]version[\s]2[\s]of[\s]the[\s]License,[\s]or[\s].at[\s]your[\s]option.[\s]any[\s]later[\s]version.[\s]This[\s]program[\s]is[\s]distributed[\s]in[\s]the[\s]hope[\s]that[\s]it[\s]will[\s]be[\s]useful,[\s]but[\s]WITHOUT[\s]ANY[\s]WARRANTY;[\s]without[\s]even[\s]the[\s]implied[\s]warranty[\s]of[\s]MERCHANTABILITY[\s]or[\s]FITNESS[\s]FOR[\s]A[\s]PARTICULAR[\s]PURPOSE.[\s]See[\s]the[\s]GNU[\s]General[\s]Public[\s]License[\s]for[\s]more[\s]details.[\s]\\/\|/* SPDX-License-Identifier: GPL-2.0-or-later /\|' $(cat filelist) perl -i -p0e 's\|\/\[\s].is[\s#]free[\s#]software[;:,][\s#]you[\s#]can[\s#]redistribute[\s#]it[\s#]and/or[\s#]modify[\s#]it[\s#]under[\s#]the[\s#]terms[\s#]of[\s#]the[\s#]GNU[\s#]General[\s#]Public[\s#]License[\s#]as[\s#]published[\s#]by[\s#]the[\s#]Free[\s#]Software[\s#]Foundation[;:,][\s#]either[\s#]version[\s#]3[\s#]of[\s#]the[\s#]License[;:,][\s#]or[\s#].at[\s#]your[\s#]option.[\s#]any[\s#]later[\s#]version.[\s#]This[\s#]program[\s#]is[\s#]distributed[\s#]in[\s#]the[\s#]hope[\s#]that[\s#]it[\s#]will[\s#]be[\s#]useful[;:,][\s#]but[\s#]WITHOUT[\s#]ANY[\s#]WARRANTY[;:,][\s#]without[\s#]even[\s#]the[\s#]implied[\s#]warranty[\s#]of[\s#]MERCHANTABILITY[\s#]or[\s#]FITNESS[\s#]FOR[\s#]A[\s#]PARTICULAR[\s#]PURPOSE.[\s#]See[\s#]the[\s#]GNU[\s#]General[\s#]Public[\s#]License[\s#]for[\s#]more[\s#]details.[\s]\\/\|/* SPDX-License-Identifier: GPL-3.0-or-later /\|' $(cat filelist) perl -i -p0e 's\|(\#\#)[\w].is free software[:;][\#\s]you[\#\s]can[\#\s]redistribute[\#\s]it[\#\s]and\/or[\#\s]modify[\#\s]it[\s\#]under[\s \#]the[\s\#]terms[\s\#]of[\s\#]the[\s\#]GNU[\s\#]General[\s\#]Public[\s\#]License[\s\#]as[\s\#]published[\s\#]by[\s\#]the[\s\#]Free[\s\#]Software[\s\#]Foundation[;,][\s\#]version[\s\#]2[\s\#]of[\s\#]the[\s\#]License.[\s\#]This[\s\#]program[\s\#]is[\s\#]distributed[\s\#]in[\s\#]the[\s\#]hope[\s\#]that[\s\#]it[\s\#]will[\#\s]be[\#\s]useful,[\#\s]but[\#\s]WITHOUT[\#\s]ANY[\#\s]WARRANTY;[\#\s]without[\#\s]even[\#\s]the[\#\s]implied[\#\s]warranty[\#\s]of[\#\s]MERCHANTABILITY[\#\s]or[\#\s]FITNESS[\#\s]FOR[\#\s]A[\#\s]PARTICULAR[\#\s]PURPOSE.[\#\s]See[\#\s]the[\#\s]GNU[\#\s]General[\#\s]Public[\#\s]License[\#\s]for[\#\s]more[\#\s]details.\s(# \n)\|\1 SPDX-License-Identifier: GPL-2.0-only\n\n\|' $(cat filelist) perl -i -p0e 's\|(\#\#)[\w].is free software[:;][\s]you[\s]can[\s]redistribute[\s]it[\s]and\/or[\s]modify[\s]it[\s]under[\s]the[\s]terms[\s]of[\s]the[\s]GNU[\s]General[\s]Public[\s]License[\s]as[\s]published[\s]by[\s]the[\s]Free[\s]Software[\s]Foundation[;,][\s]version[\s]2[\s]of[\s]the[\s]License.[\s]This[\s]program[\s]is[\s]distributed[\s]in[\s]the[\s]hope[\s]that[\s]it[\s]will[\s]be[\s]useful,[\s]but[\s]WITHOUT[\s]ANY[\s]WARRANTY;[\s]without[\s]even[\s]the[\s]implied[\s]warranty[\s]of[\s]MERCHANTABILITY[\s]or[\s]FITNESS[\s]FOR[\s]A[\s]PARTICULAR[\s]PURPOSE.[\s]See[\s]the[\s]GNU[\s]General[\s]Public[\s]License[\s]for[\s]more[\s]details.\s(#* \n)\|\1 SPDX-License-Identifier: GPL-2.0-only\n\n\|' $(cat filelist) Change-Id: Ia01908544f4b92a2e06ea621eca548e582728280 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41178 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-18	mainboard/[g-p]*: Remove copyright notices	Patrick Georgi
	They're listed in AUTHORS and often incorrect anyway, for example: - What's a "Copyright $year-present"? - Which incarnation of Google (Inc, LLC, ...) is the current copyright holder? - People sometimes have their editor auto-add themselves to files even though they only deleted stuff - Or they let the editor automatically update the copyright year, because why not? - Who is the copyright holder "The coreboot project Authors"? - Or "Generated Code"? Sidestep all these issues by simply not putting these notices in individual files, let's list all copyright holders in AUTHORS instead and use the git history to deal with the rest. Change-Id: I426518e8e18de1c8efcfb7ecb0835df3e257dca1 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39608 Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-08	mb/lenovo/*: Add support for VBOOT on 8MiB devices	Patrick Rudolph
	Enable VBOOT support on all devices that have a 8 MiB flash, using a single RW_MAIN_A partition, allowing the use of tianocore payload in both RW_MAIN_A and WP_RO. * Add VBNV section to cmos.layout * Add FMAP for VBOOT and regular boot * Select Kconfigs for VBOOT * Enable VBOOT_SLOTS_RW_A by default Also build test VBOOT on Lenovo T420. Tested on Lenovo T520 using Icb7b263ed86551cc53e1db7babccaca6b3ae2fe6. Change-Id: Icb7b263ed86551cc53e1db7babccaca6b3ae2fe6 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32585 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-09-05	mb/lenovo: Support dual graphics for xx20/xx30 ThinkPads	Evgeny Zinoviev
	Add CMOS option that allows to use both integrated and discrete GPU. Tested on ThinkPad W530. Change-Id: I8842fef0fa1235eb91abf6b7e655ed4d8598adc7 Signed-off-by: Evgeny Zinoviev <me@ch1p.com> Reviewed-on: https://review.coreboot.org/28393 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-01-26	mb///cmos.layout: Fix the values for the console level	Arthur Heymans
	Fix the values that were off by one. This was discovered when using postcar stage that prints with debuglevel BIOS_NEVER. Change-Id: I73a077950ed0dc735d89c9747a8da0a25f30822d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23186 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-09-23	mb//: Remove rtc nvram configurable baud rate	Arthur Heymans
	There have been discussions about removing this since it does not seem to be used much and only creates troubles for boards without defaults, not to mention that it was configurable on many boards that do not even feature uart. It is still possible to configure the baudrate through the Kconfig option. Change-Id: I71698d9b188eeac73670b18b757dff5fcea0df41 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19682 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-07-07	mb/lenovo/*/cmos: Port USB Always On	Patrick Rudolph
	Port commit f1395d82: "ec/lenovo/h8: Add USB Always On" to other Thinkpad boards, as it seems to work fine on all generations. Change-Id: I6dcbfaae2a444d9a679ecb64a87dc2a59b8fd281 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/20106 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2017-06-03	mb/lenovo/*/cmos: Remove unused option and checksum fix	Patrick Rudolph
	Fix for all Sandy-Bridge and Ivy-Bridge devices. Remove unused option "hyper_threading". Increase CMOS checksum range to cover all user adjustable settings. Change-Id: I02f7af13d9c82d7f531d4b49b3bc0e5a20c14b55 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19955 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2016-08-17	mainboard: Clean up boot_option/reboot_bits in cmos.layout	Nico Huber
	Since commit 3bfd7cc (drivers/pc80: Rework normal / fallback selector code) the reboot counter stored in `reboot_bits` isn't reset on a reboot with `boot_option = 1` any more. Hence, with SKIP_MAX_REBOOT_CNT_CLEAR enabled, later stages (e.g. payload, OS) have to clear the counter too, when they want to switch to normal boot. So change the bits to (h)ex instead of (r)eserved. To clarify their meaning, rename `reboot_bits` to `reboot_counter`. Also remove all occurences of the obsolete `last_boot` bit that have sneaked in again since 24391321 (mainboard: Remove last_boot NVRAM option). Change-Id: Ib3fc38115ce951b75374e0d1347798b23db7243c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/16157 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineering.com> Reviewed-by: York Yang <york.yang@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-06-01	drivers/lenovo: Add hybrid graphics driver	Patrick Rudolph
	Add a universal hybrid graphics driver compatible with all supported lenovo devices. Hybrid graphics allows to connect the display panel to either of one GPUs. As there are only two GPUs one GPIO needs to be toggled. In case the discrete GPU is activated the panel is routed to it. On deactivation the panel is routed to the integrated GPU. On lenovo laptops the dGPU is always connected to PEG10 and it is save to disable the PEG slot on dGPU deactivation. Use common gpio.c for southbridge I82801IX. Tested on Lenovo T520 using Nvidia NVS 5200m. Removed Lenovo T430s from the list of supported devices, as the T430s only supports "muxless Optimus". Depends on change id: Iccc6d254bafb927b6470704cec7c9dd7528e2c68 Ibb54c03fd83a529d1ceccfb2c33190e7d42224d8 I8bd981c4696c174152cf41caefa6c083650d283a Iaf0c2f941f2625a5547f9cba79da1b173da6f295 I994114734fa931926c34ed04305cddfbeb429b62 Change-Id: I9b80b31a7749bdf893ed3b772a6505c9f29a56d1 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/12896 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
2016-01-14	mainboard/lenovo: reserve century byte	Alexander Couzens
	The century byte is used by most RTC (default 0x32@nvram). Even the century byte can disabled via ACPI it's more safe to reserve it's space. Because some RTC will act with that byte anyhow. Some OS overwrite it when syncronize the RTC. Change-Id: I078c0c57215ccb925afa85b9d067f15268801ec9 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/11853 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2015-11-05	mainboard: Remove last_boot NVRAM option	Timothy Pearson
	The last_boot NVRAM option was deprecated and removed in commit 3bfd7cc6. Remove the last_boot option from all affected mainboards to eliminate user confusion. Change-Id: I7e201b9cf21dfe5dda156785bad078524098626d Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12316 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins)
2015-10-31	tree: drop last paragraph of GPL copyright header	Patrick Georgi
	It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-05-21	Remove address from GPLv2 headers	Patrick Georgi
	As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA[, ]02110-1301[, ]USA:Foundation, Inc.:" {} + $ find -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]Suite 330, Boston, MA 02111-1307[, ]USA:Foundation, Inc.:" {} + $ find -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \.patch \ -a \! -name \_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-02-16	mainboard/cmos: Delete obsolete commented parameters	Timothy Pearson
	Change-Id: Iccad79c142a7fcf89dd0fbebe8c07ad9ef019e91 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8459 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2015-01-03	lenovo/t420s: Add new port.	Nicolas Reinecke
	This is based on x220 and t520. Tested on i7 model with usb3. There is no support for nvidia gpu and optimus. Change-Id: I6ca9436ccec3024095d02078e5e450147841e463 Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-on: http://review.coreboot.org/7974 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-by: Peter Stuge <peter@stuge.se>