aboutsummaryrefslogtreecommitdiff
path: root/src/mainboard/jetway
AgeCommit message (Collapse)Author
2014-08-15intel/cpu: rename car.h to romstage.hAaron Durbin
This header has nothing to do with cache-as-ram. Therefore, 'car' is the wrong term to use. It is about providing a prototype for *romstage*. Change-Id: Ibc5bc6f3c38e74d6337c12f246846853ceae4743 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/6661 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-08-14Intel: Add common header file for CAR setupEdward O'Callaghan
When passing '-ffreestanding' the 'main' romstage.c may no longer necessarily be considered the entry point. From the C specification in 5.1.2.1 Freestanding environment; "In a freestanding environment (in which C program execution may take place without any benefit of an operating system), the name and type of the function called at program startup are implementation-defined." Clang complains about these being missing as Clang is somewhat more strict about the spec than GNU/GCC is. An advantage here is that a different entry-point type-signature shall now be warned about at compile time. Change-Id: I467001adabd47958c30c9a15e3248e42ed1151f3 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5872 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-30Kconfig: Fix comments on endif to match the corresponding ifDaniele Forsi
Change-Id: I5c40de41a01d9c558f6c2795e19e643009804e70 Signed-off-by: Daniele Forsi <dforsi@gmail.com> Reviewed-on: http://review.coreboot.org/6397 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-07-28AGESA boards: Drop get_bus_conf.c filesKyösti Mälkki
The only remaining purpose for get_bus_conf() was to fill in obscure bus_sb800 (etc.) arrays containing partial PCI bus enumeration. Complete enumeration is available in devicetree and PCI configuration space so discard these arrays. Change-Id: I733115940afba3a50c58aedb9a04ecf5082b1234 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6360 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-28AGESA f14 f15tn 16kb: Move IOAPIC ID setup out of get_bus_conf()Kyösti Mälkki
Change-Id: I7fd14c17242cd3deb7a784fc918ad6fe1191bd13 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6359 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-28AGESA boards: Use devicetree for PCI bus enumerationKyösti Mälkki
Previously MP table contained PCI_INT entries for PCI bus behind bridge 0:14.4 even if said PCI bridge function was disabled. Remove these as invalid, indeterminate bus number could cause conflicts. PCI_INT entries with bus_sb800[2], bus_hudson[2] and bus_yangtze[2] were invalid as there is no PCI bridge hardware on device 0:14.0. Remove these as invalid, indeterminate bus number could cause conflicts. Change-Id: Ie6a3807f64c8651cf9f732612e1aa7f376a3134f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6358 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-28AGESA: Drop some excessive agesawrapper.h includesKyösti Mälkki
Change-Id: I3807912b1dc68fae8248a66e37bbe642fb92d3ae Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6262 Tested-by: build bot (Jenkins)
2014-07-24AGESA: Drop offset on PCI device enumerationKyösti Mälkki
Integrated PCI devices in southbridge silicon have static BDFs, no need to have variables to store the parent bus or an offset with constant zero. Change-Id: I37d3794d36b5e5775da9215574ddc199696646d0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6333 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-24AGESA: Drop unused extern declarationsKyösti Mälkki
Change-Id: I7f681b40251f49ff717589ed5e7d7e00ee36c7c1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6332 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-24AGESA boards: Drop global bus_isaKyösti Mälkki
Only ever used as lvalue (except when incrementing) so this global is unused. Change-Id: I616721f937eb0bfdb28f356284efd70f99ccd2dd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6330 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-24src/mainboard: Remove trailing whitespaceElyes HAOUAS
Change-Id: I14a9dc99acb5d5365a3d7e99a3964120bb611b05 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: http://review.coreboot.org/6308 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-18mainboard: Trivial - drop trailing blank lines at EOFEdward O'Callaghan
Change-Id: If29a70be4fb56ebb0dbf6d510412cbe2f34480ef Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6291 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-07-18mainboard: Make use of ARRAY_SIZE in buildOpts.c on AGESA platformsEdward O'Callaghan
Found using coccinelle. Change-Id: I406de6cfe25d3b471dbb6f98d9c62addae008de3 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6195 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-17AMD get_bus_conf(): Drop bus_type arrayKyösti Mälkki
Only ever used as lvalue, so no point creating the array. Change-Id: I6699dfae9377a895e9bc4a52579d00ddcfa60a9f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6277 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2014-07-17mainboard,ASL: Trivial - drop trailing blank lines at EOFEdward O'Callaghan
Change-Id: Ib531a54db7df6b49a6218f689dcaab712e9dfb01 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6292 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-07-14AGESA CIMx: Move late init out of get_bus_conf()Kyösti Mälkki
Followup deals further with Fam15 case. For unknown reasons calls were commented out for amd/dinar and they remain that way. Change-Id: Ie0a25fbb6f5378019fbf0f19a02acf024d79817e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6237 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-14AGESA: Trace execution with AGESAWRAPPER()Kyösti Mälkki
Implement logging just once to have uniform output. Change-Id: I8db694a3bf6b1af459bdf98f7acb99edf4dd07f7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6180 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-08mainboard: Trivial - drop trailing blank lines at EOFEdward O'Callaghan
Change-Id: I05d6d22664155ac8478e665733f816776e277c22 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6200 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-07-03AGESA boards: Use acpi_is_wakeup_s3()Kyösti Mälkki
Change-Id: Ib76ec433710b3a7c26360329a9403585d6f4fe4c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6143 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-03AGESA: Call get_bus_conf() just onceKyösti Mälkki
Instead of calling get_bus_conf() three times from write_tables() and executing it once, just make one call before entering write_tables(). Change-Id: I818e37128cb0fb5eaded3c1e00b6b146c1267647 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6133 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-03AGESA: Add agesawrapper_post_device()Kyösti Mälkki
NOTE: The procedure is moved across a collected timestamp TS_WRITE_TABLES, so the delay of SPI erase/write will be accounted for in an earlier entry in cbmem -t output. Change-Id: I0f082e7af1769c8d7d03cdd51fdb5dacbf3402b4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6132 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-03AGESA boards: Use acpi_s3_resume_allowed()Kyösti Mälkki
This adds use of BROKEN_CAR_MIGRATE to include CBMEM symbols for the build of romstage also for boards without HAVE_ACPI_RESUME. These symbols got exposed as the use of preprocessor directives was reduced. We expect the linker to do a fair job and optimize away function bodies that are on unreachable execution paths. Change-Id: Ibf5181d3eecb87ce647abe0be01072594b05aa5f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6067 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-03AGESA boards: Add prepare_for_resume()Kyösti Mälkki
Use one common implementation for all AGESA platforms. Change-Id: I410f8e0a9c75445882d67659cde00004eb7ad6b4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6084 Tested-by: build bot (Jenkins) Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-02AMD/agesa: Add functions for AMD PCI IRQ routingDave Frodin
Port the changes that were made in amd/cimx to amd/agesa as were done in: commit c93a75a5ab067f86104028b74d92fc54cb939cd5 Author: Mike Loptien <mike.loptien@se-eng.com> Date: Fri Jun 6 15:16:29 2014 -0600 AMD/CIMx: Add functions for AMD PCI IRQ routing This change also moves the PCI INT functions to southbridge/amd so that they can be used by CIMX and AGESA. The amd/persimmon board is updated for this change. Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Change-Id: I525be90f9cf8e825e162d53a7ecd1e69c6e27637 Reviewed-on: http://review.coreboot.org/6065 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-26amd/persimmon jetway/nf81-t56n-lf: Fix whitespace and alignmentKyösti Mälkki
Change-Id: I76f017b0919e301eeb84e73eff21170bbc921ae2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6113 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-06-26AMD boards: Fix typosKyösti Mälkki
Change-Id: If1dc4fd2204a2e4b6f84c75f385b8ff958d2251d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6112 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-06-26AMD boards: Fix typosKyösti Mälkki
Change-Id: I22180c3c2987396717864f04c59560029d088d53 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6111 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-06-26AMD boards: Fix typosKyösti Mälkki
Change-Id: I92f3877b58d9acaa9578337e66107e9cd9f46043 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6110 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-06-26AMD boards: Fix typosKyösti Mälkki
Change-Id: I090e98fbf28595d3917ef84e19bd6d6742f11b94 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6108 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-06-26PIRQ tables: Fix typosKyösti Mälkki
Change-Id: I4d8abe3841378e06515e1b3a8f22d78425d08449 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6109 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-06-25Declare acpi_is_wakeup_early() only onceKyösti Mälkki
Change-Id: I5314d76168c40a6327d4a9ac3b4f4fb05497d6fc Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4525 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-20mainboard/jetway/nf81-t56n-lf: Port recent Persimmon changesEdward O'Callaghan
Port to recent reference board (AMD Persimmon) changes in commits: c93a75a AMD/CIMx: Add functions for AMD PCI IRQ routing Change-Id: I307709bfee554bc64788a973da6d9313ca7c0de2 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5882 Tested-by: build bot (Jenkins) Reviewed-by: Mike Loptien <mike.loptien@se-eng.com>
2014-06-18mainboard/jetway/nf81-t56n-lf: Drop SIO_PORT from KconfigEdward O'Callaghan
CONFIG_SIO_PORT is not used anywhere and should not be here any way. Change-Id: I2e7be4337f7f46298b9ca5bd613c58deec2cb01a Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6043 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-14amd/agesa,cimx: Rename ACPI OS detection methodsEdward O'Callaghan
Try to 'standardize' the otherwise peculiar method naming to be somewhat more in-line with other ACPI implementations. This makes it easier to compare with vendor DSDT dumps for example. Change-Id: I5ba54f7361796669ac0cab7ff91e7de43b22e846 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5888 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-06-13mainboard.c: Fix typo in appro*p*riate in commentPaul Menzel
Use the following command to fix all occurences. $ git grep -l approriate | xargs sed -i 's/approriate/appropriate/g' Change-Id: I4cbba972bb445c2407ef2e63ffb3068fc948f1c6 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/5987 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-06AGESA: Use common heap allocatorKyösti Mälkki
Change-Id: I5df1f0efdef2592b762fe391edaadbca4593e85a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5689 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-06AGESA: Use common GetBiosCallout()Kyösti Mälkki
Change-Id: I9c8f7cc98c65102486e17ec49fa2246211dffc4f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5688 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-26AGESA fam12 fam14 fam15: Declare local callouts staticKyösti Mälkki
Change-Id: I2ff70cafdd808a235ed4f0663e182d306f493c7e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5685 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-26AGESA fam12 fam14 fam15: Common handler for AGESA_RUNFUNC_ONAPKyösti Mälkki
Change-Id: I9f27e1e814a80864d8ca315fe816a083c55708c6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5682 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-26AGESA fam12 fam14 fam15: Common handler for AGESA_DO_RESETKyösti Mälkki
This is x86 "standard" 0xcf9 reset mechanism. Change-Id: Ieb48290b21a7cb1425881fdd65c794e96da0248f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5680 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-26AGESA: Add common calloutsKyösti Mälkki
Most of the callouts are not specific to board or even family. Start new file with default callouts doing nothing and returning either AGESA_SUCCESS or AGESA_UNSUPPORTED. Also add callout for returning empty IdsIdData. This feature is not used and could be easily overriden at board-level at later time. Change-Id: I65dbcdd80dddc89d47669ebe62c22caa63792f5c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5678 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-13southbridge/amd/sb?00/lpc.c: Move i8254/i8259 down in southbridgeEdward O'Callaghan
We should configure i8254/i8259 down in to the southbridge rather than romstage of every AGESA/CIMx board much like Intel boards do. Change-Id: Id7c4f0baa0819d52aef9b0ee03c20d0fa16b9352 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5669 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-10Replace SERIAL_CPU_INIT with PARALLEL_CPU_INITKyösti Mälkki
Lines with 'select SERIAL_CPU_INIT' where redundant with the default being yes. Since there is no 'unselect SERIAL_CPU_INIT' possibility, invert the default and rename option. This squelches Kconfig warnings about unmet dependencies. Change-Id: Iae546c56006278489ebae10f2daa627af48abe94 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5700 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-05-10mainboard/jetway/nf81-t56n-lf: Toggle WDT and CIR in devicetree.cbEdward O'Callaghan
Turn on WDT support in the devicetree. Turn off CIR support. Dispense with old commentary. Change-Id: Icf0c0e12a0ed7ce6c3b6176653e076ffc2ba937e Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5698 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-08superio/fintek/f71869ad: Make hwm devicetree configurableEdward O'Callaghan
Provision the configuration of the Fintek F71869AD Hardware Monitor's configuration by way of devicetree.cb. Make use of this in the jetway/nf81-t56n-lf board to properly control fan's. Change-Id: Ic25b29d1b7a9145e0e209b490b25a2cbc46cb75c Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5580 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-05-08superio/fintek/f71869ad: Configure multi-func reg in devicetreeEdward O'Callaghan
Facilitate for the configuration of so called "Multi-function Select Registers" with devicetree.cb in ramstage. Make use of this new functionality in, mainboard/jetway/nf81-t56n-lf to correctly configure the Fintek's multiplexed GPIO pins to be in AMD TSI mode. This allows the Fintek to correctly talk to the Southbridge over the SMBus for CPU temperature data as to control fans and so on. Change-Id: I80abcd8b767fc4b22d00d1384ce4ef89fe837e3d Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5576 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-05-08mainboard/jetway/nf81-t56n-lf: Improve diags in romstageEdward O'Callaghan
romstage reports a completely unintelligible printf of "error level:", fix this and document meaning of the return values in source. Change-Id: Ia2fb9a6206e08822f6c2f62b69bf22cdae2ba819 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5465 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-05AGESA: Fix BiosCallouts table formattingKyösti Mälkki
Already done for fam15tn and fam16kb. Change-Id: I3da36bfe6fd1805867eee5aa1f017c4fda084349 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5660 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-05AGESA: Implement EmptyHeap()Kyösti Mälkki
Heap allocation begins with BIOS_HEAP_MANAGER, no need to clear the fields individually. Change-Id: Ia1af84bd09d1edf8f72223752557d44a96dec6e1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5659 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-05AGESA fam14: Use common calloutsKyösti Mälkki
Backported from fam15tn and fam16kb. This also implements GetHeapBase() to satisfy some requirements of HAVE_ACPI_RESUME for the following boards: amd/inagua amd/south_station amd/union_station asrock/e350m1 Change-Id: I488d063d4eabf4bf45bcbabd1e8f13b88b2ef401 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5658 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-05AGESA fam14: Add fam14_callouts headerKyösti Mälkki
Backported from fam15tn and fam16kb. Change-Id: I868352b32ff56a8386c615ab1a9f59e7e875292e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5657 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-05jetway/nf81-t56n-lf: Revert change on function prototypesKyösti Mälkki
These function prototypes to remain identical across all AGESA families. Change-Id: If2a0a08fa7122e6becded37d032d3c40bde2d149 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5656 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-03Move ARCH_* from board/Kconfig to cpu or soc Kconfig.Furquan Shaikh
CONFIG_ARCH is a property of the cpu or soc rather than a property of the board. Hence, move ARCH_* from every single board to respective cpu or soc Kconfigs. Also update abuild to ignore ARCH_ from mainboards. Change-Id: I6ec1206de5a20601c32d001a384a47f46e6ce479 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5570 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-02jetway/nf81-t56n-lf: Set OEM to Jetway in DSDT and mptablesEdward O'Callaghan
Jetway builds this hardware, so let us be sure to set the truth in the DSDT Definition block and MPTables. Change-Id: I2dfb89152aa3b895ec6975293c5a5998ab6b52bd Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5630 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-02mainboard/jetway/nf81-t56n-lf: Properly indent devicetree.cbEdward O'Callaghan
Following the reasoning in, dfa8a32 src/mainboard/asrock/e350m1: Properly indent devicetree.cb Change-Id: I88ca01519c1c47a7eb0d564a55c945589f9d32af Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5629 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-28AMD: Add common header file for CAR setupKyösti Mälkki
Change-Id: I24b2cbd671ac3a463562d284f06258140a019a37 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4683 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-04-26superio/fintek/*: Factor out generic romstage componentEdward O'Callaghan
The romstage of Fintek Super I/O's is identical, leading to replication of essentially the same code prone to bitrot. Herein we consolidate the early pre-ram UART initialisation code into fintek/common, rather we leave the exceptions to be implemented under model/. More precisely we provide a well documented version of early_serial.c under fintek/common and select by way of Kconfig as a generic romstage component to Super I/O support. We leave future Super I/O's the option to implement `non-standard` initialisation code should such a (unlikely) need araise. A primary advantage is that new support for romstage serial is now trival to add. We also provide some Kconfig documentation while here. Change-Id: I3c62561558a62ece944a167ba302fb7076bba001 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5575 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-26mainboard/*: Remove DUMP_ACPI_TABLES from amd boardsEdward O'Callaghan
Dumping the ACPI tables in this way has limited use, is not likely to be used and is poorly implemented. There are much more sophisticated tools available on Linux for debugging ACPI as such this code is outside the scope of coreboots 'bring up the hardware only' philosophy. A more generic implemention could be done with hexdump() in coreboot proper following on from this cleanup. Change-Id: Ifd3bfb76338609d18fcf7158d3c9a6d7c06c8847 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5530 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-20AMD AGESA cimx/sb800: Drop APIC_ID_OFFSET and MAX_PHYSICAL_CPUSKyösti Mälkki
All boards had APIC_ID_OFFSET=0 and MAX_PHYSICAL_CPUS=1. Change-Id: I6f08ea6de92a2af79fb3a99c5edd942b3a321c43 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5538 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-04-16AMD AGESA: Drop SB_HT_CHAIN_UNITID_OFFSET_ONLYKyösti Mälkki
Not used with AGESA vendorcode. Change-Id: Ic9a0513641bf76d748bb106675bccc33c7abe21e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5520 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-04-16AMD AGESA: Drop LIFT_BSP_APIC_IDKyösti Mälkki
Not used with AGESA vendorcode. Change-Id: Ie99abf5bcffd740e2e7ed6d78937ab32935ef214 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5519 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-04-16AMD AGESA: Drop AMDMCTKyösti Mälkki
This config option is fam10 only. Change-Id: I7f4619d2d4e7e7695a8ee691d879df2748f1c0c7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5518 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-15mainboard/jetway/nf81-t56n-lf: Make ACPI debug menuconfigableEdward O'Callaghan
Turns out we have a CONFIG_DEBUG_ACPI definition under: Debugging -> Output verbose ACPI debug messages Hence, let us make use of this definition. Change-Id: I1b673feb6d9b2ee51c832a1cef159cd80e5c3517 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5506 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-15mainboard/jetway/nf81-t56n-lf: Documentation cosmeticsEdward O'Callaghan
Keep under 80 colums and Doxygen'ify inline documentation somewhat. Strip some whitespace bulk while here and refactor a little as to line wrap. Additionally, following the reasoning of: 0b2fa34 hp/pavilion_m6_1035dx/buildOpts.c: Remove commented out tables remove some fluff from buildOpts.c Change-Id: Icb38f087724d3e3511df1d554a620eb637ce286a Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5481 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-04-14jetway/nf81-t56n-lf: Use hexdump() for dumping ACPI tablesEdward O'Callaghan
Use hexdump() instead of a local implementation for dumping ACPI_TABLES. Change-Id: I20354a4f9dff4105de5af696bb9da4a4f6cca788 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5466 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-04-13cimx/sb800 boards: Don't require ide.asl on boards without IDEEdward O'Callaghan
Not all boards which use the AMD cimx/sb800 southbridge have IDE. However, the southbridge's asl included an 'ide.asl' file which had to be present in $(mainboard_dir)/acpi. Address this issue by including ide.asl only in boards which have IDE, and remove it from all other cimx/sb800 boards. Change-Id: I57fcb4db9f85234b05ae1705ef81a576c478cee6 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5460 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-13jetway/nf81-t56n-lf: Replace AGESA types with stdint typesEdward O'Callaghan
Try to use void and uint*_t type specifiers in place of VOID and UINT* respectively. Use const in place of CONST type modifier. Remove some useless type casts. A few unneeded comments containing the AGESA redefenied types are also removed. Change-Id: I4bff96a222507fc35333488331c3f35ef1158132 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5486 Tested-by: build bot (Jenkins)
2014-04-13jetway/nf81-t56n-lf: Use std memset/memcpy func over AGESAEdward O'Callaghan
Replace usage of AGESA poor reinvention of memset/memcpy functions with the usual standard ones. Change-Id: Ibfe9ee253d57140b06a4fca6b47b2051308ad012 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5484 Tested-by: build bot (Jenkins)
2014-04-09jetway/nf81-t56n-lf: Simplify agesawrapper_amdinitcpuio()Edward O'Callaghan
Follow same reasoning as: 12fd779 hp/pavilion_m6_1035dx: Simplify agesawrapper_amdinitcpuio() Use coreboot variants for PCI and MSR access over AGESA's. Change-Id: Ic0d8bbd0faf6423605567564ad216b79e1331cc9 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5472 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-06jetway/nf81-t56n-lf: Sanitize #includesEdward O'Callaghan
Following the same reasoning as commit 1d87dac hp/pavilion_m6_1035dx: Sanitize #includes Clean up the #include directives in this board support. Change-Id: I97b73a349ca7e49b413d7c04900f25076488dde4 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5414 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-02superio/fintek/f71863fg: Avoid .c includesEdward O'Callaghan
Following the same reasoning as commit d304331 superio/fintek/f81865f: Avoid .c includes Clean up the early_serial #include directives in mainboard/romstage code. Change-Id: I863c16634873224c17e43100271e9b91419724d0 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5435 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-02superio/fintek/f71805f: Avoid .c includesEdward O'Callaghan
Following the same reasoning as commit d304331 superio/fintek/f81865f: Avoid .c includes Clean up the early_serial #include directives in mainboard/romstage code. Change-Id: Ibf743f7a5dd4a424a4513014fc9a896b87ecf3b1 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5434 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-03-26mainboard/jetway/nf81-t56n-lf: Enable ACPI S3 support in KconfigEdward O'Callaghan
Switch on ACPI suspend/resume support which now works after many cycles. Change-Id: I94a9bc9f23c2b4482d940018d542ab89e6c76f09 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5406 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-03-24mainboard/jetway/nf81-t56n-lf: Turn on PME in devicetree.cbEdward O'Callaghan
Change-Id: Ia58994d14ebf488a9200b02ec7af9c71ef4de9e6 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5401 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-03-13mainboard/jetway/nf81-t56n-lf: Fix HWM base addr.Edward O'Callaghan
The target board has a different base addr. for its hardware monitor (fans, temp, etc) from the Fintek Super I/O datasheet. Change-Id: Ifc025cb92d0fc4e8f813091d00a6c87deae05863 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5383 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-03-13mainboard/jetway/nf81-t56n-lf: Remove hard-coded IMC fan craft.Edward O'Callaghan
Fan controls in 0x400-0x4ff are not programmed here. Thus fan control from amd/persimmon in the devicetree.cb does not apply to this board. Change-Id: I9156143476df0a7b44c7af90fa2107e8a8ba851e Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5381 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-03-09mainboard/jetway/nf81-t56n-lf: Turn PS/2 driver on by default.Edward O'Callaghan
This board has a working PS/2 port for a keyboard. Thus, it makes for a good option to have on by default. Change-Id: Ifcde0474d7be26152f1b5e19fe4906e87732b9a4 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5357 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-03-09mainboard/jetway/nf81-t56n-lf: Fix GPP missing CLK on PCI bridge.Edward O'Callaghan
The platform dependent mainboard.c was incorrectly disabling the second clock signal feeding the GPP ports. This results in spurious hangs by calling the set_pcie_dereset() SB CIMx callback many times. This also stops coreboot from finding the second NIC behind the pci 15.0 bridge. Change-Id: I9f2370f6e05d1c5532fbca8203e32ab1ff15266a Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5355 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-03-04jetway/nf81-t56n-lf: Minor corrections to devicetree.cbEdward O'Callaghan
The miniPCIe ports hanging off 15.0 are infact x1, as are the two onboard NIC's on 6.0 and 15.0. Change-Id: I6247838f6b5823369543e338975a4c5c6fd00d7c Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5328 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-03-04jetway/nf81-t56n-lf: Fix PS/2 ACPI for KBC & Mouse.Edward O'Callaghan
Provide ACPI table node so that the PS/2 keyboard/mouse port works in GNU/Linux. Change-Id: If73b8d37a81bb9066cbcc650b518d25e243b84e7 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5327 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-02-24jetway/nf81-t56n-lf: Use proper category.Vladimir Serbinenko
"Mini-ITX" was a pure inventional name for category called "mini". Change-Id: I6450fd27c1a7679f252ce7f46f409b7dc459c50d Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5286 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-02-16Jetway NF81-T56N-LF [2/2]: actually implement mainboard support.Edward O'Callaghan
Step 2: change the Persimmon code to adapt it to the new board's hardware. The NF81-T56N-LF is a IPC form factor embedded board: - AMD Fusion G-T56N (1.65 GHz dual core) APU - 2x SO-DIMM sockets for DDR3 800-1066 SDRAM (Fixed at 1.5V) - VGA and LVDS (via Analogix ANX3110) - AMD A55E (Hudson-E1) southbridge - 6x USB 2.0/1.1 ports - 5x SATA3 6Gb/s, 1x mSATA socket - 6-Channel HD Audio (via VIA VT1705) - PCI and ISA (via ITE IT8888)?? - NEC uPD78F0532 microcontroller on I2C ("SEMA")?? - 2x RJ45 GbE (via Realtek RTL8111E x2) - Fintek F71869AD Super I/O - PS/2 KB/MS port - RS232 header (via Unisonic UTC 75232 RS232 driver/receiver) - GPIO header - CIR header - 1x MXIC MX25L1606E (SO8, soldered) 16 Mbit SPI flash (BIOS) Note: MX25L1606E is 16Mbit, 8bits in a byte, so 2MB. Jetway *lies* claiming the SPI flash is 16MB. They also use red pen over the chip so you wont see this deceit. Change-Id: I03ccc58bc782e800aeef0d19679ce060277b0c04 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/4801 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-02-16Jetway NF81-T56N-LF [1/2]: create board by forking AMD PersimmonEdward O'Callaghan
Step 1: copy all files unmodified from Persimmon. This makes it much easier later to see how the two boards actually and deliberately differ when porting bugfixes from one to the other. Change-Id: I23e223049ed1c69e320e6b31efe4266bfeb97207 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/4800 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-01-19boardstatus: Remove some needless name overrides.Vladimir Serbinenko
Overrides were to have names in line with wiki but names derived from the tree are better in some cases. Change-Id: Iff3c27db1a4936b03f976c82d872589e41df0c90 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4735 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-01-19boardstatus: Handle clones.Vladimir Serbinenko
Change-Id: I7bfe19eb800729713a549dc0396765a9785e11b1 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4732 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-01-19board-status: Add board_info.txt extracted from wiki.Vladimir Serbinenko
board_info.txt is a file to be used by board-status to add some useful info to the generated table like flash chip type. This series is autogenerated from wiki page Supported_Motherboards. Change-Id: Ie2bda900713ef4883134477163320936c84c34f5 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4701 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-01-19jetway/j7f4k1g2e and jetway/j7f4k1g5d: Add as clones of jetway/j7f2.Vladimir Serbinenko
Change-Id: I16e027b78dc65538d8f0cd6f5e57bbdfc10b7169 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4729 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-01-19jetway/j7f24: Rename to jetway/j7f2.Vladimir Serbinenko
Original actually meant j7f[24] which without square brackets became confusing. There is no such board as j7f24. This is a prerequisite to adding j7f4* as cloned boards Change-Id: Ia7708b13ac4141ef788183c7817fce1366919936 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4728 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2013-12-29AMD fam10: Drop RAMINIT_SYSINFOKyösti Mälkki
AMD fam10 raminit cannot be built without RAMINIT_SYSINFO, this is not a true option but copy-paste remainder from AMD K8. Change-Id: Id8edc112f3bacebd1732304ac9ee6e77cc6263b7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4581 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-26AMD fam10: Drop MEM_TRAIN_SEQKyösti Mälkki
This config was for AMD K8 only. Change-Id: I76276405b676d1dd4d5dbf8c5b94194a670ccb25 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4555 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-26AMD boards (non-AGESA): Cleanup post_cache_as_ram.c includesKyösti Mälkki
Change-Id: Ib3a69e3364418426438f88ba14e5cf744e2414fa Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4524 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-12-26AMD boards (non-AGESA): Cleanup earlymtrr.c includesKyösti Mälkki
Change-Id: I5f4bf9dbaf3470dc83d3e980bb6cab10801e15c1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4523 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
2013-12-09AMD boards: Fix includes for microcode updatesKyösti Mälkki
No ROMCC involved, no need to include .c files in romstage.c. Change-Id: I8a2aaf84276f2931d0a0557ba29e359fa06e2fba Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4501 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-08-16Correct spelling of shadow, setting and memoryPaul Menzel
Change-Id: Ic7d793754a8b59623b49b7a88c09b5c6b6ef2cf0 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3768 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-08-15Include boot_cpu.c for romstage buildsKyösti Mälkki
ROMCC boards were left unmodified. Change-Id: I3d842196b3f5b6999b6891b914036e9ffcc3cef0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3853 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-06-23AMD boards: routing.asl: Uniformly start `Package()` with capital letterPaul Menzel
In commit Rudolf Marek discovered, that it is not uniformly written. As »ASL names are not case-sensitive and will be converted to upper case.« [2] this change does not have any functional change. The following command was used to create this patch. $ git grep -l 'package()' src/mainboard | xargs sed -i 's,package(),Package(),' [1] http://review.coreboot.org/#/c/3318/ [2] http://www.acpi.info/spec40a.htm (18.2.1 ASL Names) Change-Id: I1784dbc50936a1ef9d4376209a3c324ef1fb85cf Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3516 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-03-22x86: Unify arch/io.h and arch/romcc_io.hStefan Reinauer
Here's the great news: From now on you don't have to worry about hitting the right io.h include anymore. Just forget about romcc_io.h and use io.h instead. This cleanup has a number of advantages, like you don't have to guard device/ includes for SMM and pre RAM anymore. This allows to get rid of a number of ifdefs and will generally make the code more readable and understandable. Potentially in the future some of the code in the io.h __PRE_RAM__ path should move to device.h or other device/ includes instead, but that's another incremental change. Change-Id: I356f06110e2e355e9a5b4b08c132591f36fec7d9 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2872 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-01GPLv2 notice: Unify all files to just use one space in »MA 02110-1301«Paul Menzel
In the file `COPYING` in the coreboot repository and upstream [1] just one space is used. The following command was used to convert all files. $ git grep -l 'MA 02' | xargs sed -i 's/MA 02/MA 02/' [1] http://www.gnu.org/licenses/gpl-2.0.txt Change-Id: Ic956dab2820a9e2ccb7841cab66966ba168f305f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2490 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-02-25AMD boards: ACPI DSDT: Use COREBOOT for the OEM Table ID fieldPaul Menzel
The DSDT header contains the fields OEMID and OEM Table ID. See for example ACPI specification 4.0a [1] 5.2.11.1 Differentiated System Description Table (DSDT) on page 135. There Table 5-16 contains the descriptions. Field Byte Length Byte Offset Description =================================================== OEMID 6 10 OEM ID OEM Table ID 8 16 The manufacture model ID. Currently in coreboot there is no common method what to put in these fields. Mostly Intel based boards populate it with "CORE " ore "COREv4" and AMD based boards populate it with the board vendor and model number, abbreviated appropriately to fit into these fields. On most boards the proprietary vendor BIOS seems to leave these fields – displayed with `sudo dmidecode` under System Information – blank To Be Filled By O.E.M. and fill out the Base Board Information with the board vendor and model name. In [2] Jens Rottmann argues that the this is really just the table ID used for naming it and that »99% of the DSDT code is not board specific«. Both approaches seem to have their advantages, but using the second one, developers often seem to forget to update them (for example AMD Thather). The current situation is at least not optimal. and therefore at least unify the string in the OEM Table ID. If unifying the OEM ID is also a good idea this should be done too. If later on it should be decided that the board vendor and model should be used again, this should be somehow derived from Kconfig. The following command was used for the change [3]. $ git grep -l '\/\* TABLE ID \*\/' | xargs sed -i '/TABLE ID/s/"\([^"]*\)"/"COREBOOT"/' This patch is split out from [2]. [1] http://www.acpi.info/spec40a.htm [2] http://review.coreboot.org/#/c/2464/ [3] http://stackoverflow.com/questions/5207838/sed-regex-matching-text-between-to-double-quotes-when-a-certain-text-appears-i Change-Id: Iec98c615ce37f928abc1b500eff5aa865d772cb2 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2472 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-25mainboard.c: Name enable_dev function uniformly `mainboard_enable`Paul Menzel
To reduce the differences between these file name the enabling device function in the directory `src/mainboard` uniformly `mainboard_enable` [1]. Thanks to the awesome help of gnomon and BlastHardcheese in the IRC channel #sed on <irc.freenode.net>. gnomon came up with the following command to do the actual work. $ cd src/mainboard $ for f in */*/mainboard.c ; \ > do src="$(awk '/\.enable_dev = /{v=$NF; sub(/,$/,"",v); print v}' "$f")" ; \ > [[ -z $src ]] && continue ; \ > printf '%s\n' "g/${src}/s/${src}\([,(]\)/mainboard_enable\1/p" w | ed -s "$f" ; \ > done `src/mainboard/digitallogic/msm586seg/mainboard.c` and `src/mainboard/technologic/ts5300/mainboard.c` had to be adapted manually as no comma was used separating the struct members. And with the following statement, gnomon is even more likable! My pleasure entirely. Good luck with coreboot; I'm a big fan of the project. [1] http://www.coreboot.org/pipermail/coreboot/2013-February/074548.html Change-Id: Ife9cd0c2d9cc1ed14afc6d40063450553f06a6c6 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2493 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-16 12:04:15 +0000