Age | Commit message (Expand) | Author |
2011-04-18 | * Set USBDEBUG_DEFAULT_PORT in all southbridges and use that value | Stefan Reinauer |
2011-03-28 | SP5100's code is based on SB700. Change the legacy sb700 of sb7xx_51xx. | Zheng Bao |
2011-03-08 | Enable mahogany_fam10 and Kino family 10h to run the SB HT link at the expect... | Scott Duplichan |
2011-03-01 | Use subsystem id from devicetree.cb instead of Kconfig and move | Sven Schnelle |
2011-02-26 | Make AMD Fam10h CPU microcode updates optional in Expert mode | Xavi Drudis Ferran |
2010-12-16 | Get mptable OEM/product ID from kconfig variables. | Uwe Hermann |
2010-12-11 | Following patch makes just one fadt.c file. For SB700. | Rudolf Marek |
2010-12-11 | After this has been brought up many times before, rename src/arch/i386 to | Stefan Reinauer |
2010-12-10 | Add TINY_BOOTBLOCK support for AMD SB700. | Uwe Hermann |
2010-12-09 | Deduplicate various ACPI .asl files. | Uwe Hermann |
2010-12-08 | Move "select CACHE_AS_RAM" lines from boards into CPU socket. | Uwe Hermann |
2010-12-08 | second round name simplification. drop the <component>_ prefix. | stepan |
2010-12-08 | first round name simplification. drop the <component>_ prefix. | stepan |
2010-12-07 | Get rid of some unneeded function prototypes in romstage.c files. | Uwe Hermann |
2010-12-07 | Trivial. Fix typo. | Zheng Bao |
2010-12-06 | Drop unused/obsolete CONFIG_COMPRESS from a few board Kconfigs. | Uwe Hermann |
2010-11-28 | devicetree.cb: Only add as many entries as there are DIMM slots. | Uwe Hermann |
2010-11-22 | Drop per-board ram_check() calls for now. | Uwe Hermann |
2010-11-21 | Simplify a few code chunks, fix whitespace and indentation. | Uwe Hermann |
2010-11-21 | Drop excessive whitespace randomly sprinkled in romstage.c files. | Uwe Hermann |
2010-11-21 | Convert boards to use mptable_write_buses. | Patrick Georgi |
2010-11-21 | Use DIMM0 et al in lots more places instead of hardocding values. | Uwe Hermann |
2010-11-20 | Some more DIMM0 related cleanups and deduplication. | Uwe Hermann |
2010-11-20 | Unify DIMM SPD addressing. For Geode, change the | Patrick Georgi |
2010-11-18 | Eliminate SET_NB_CFG_54 option. There was no board that | Patrick Georgi |
2010-11-17 | This problem was introduced with | Tobias Diedrich |
2010-11-16 | Move the SET_FIDVID* family of configuration options to Kconfig and | Patrick Georgi |
2010-11-07 | DSDT.asl should not report the AMD SB600/SB700 RTC as Intel PIIX4 | Scott Duplichan |
2010-11-06 | Remove comments that are obsolete since r6028. | Uwe Hermann |
2010-11-05 | Move QRANK_DIMM_SUPPORT to Kconfig, removing it from romstage.c | Patrick Georgi |
2010-11-05 | Various PIRQ/MPTABLE/ACPI Kconfig fixes. | Uwe Hermann |
2010-10-31 | Remove definitions of ACPI_SSDTX_NUM to 0, that's the default anyway. | Uwe Hermann |
2010-10-26 | We need to call smp_write_lintsrc() instead of smp_write_intsrc() for | Tobias Diedrich |
2010-10-25 | Factor out common mptable code to mptable_init(). | Uwe Hermann |
2010-10-24 | Running a checked build of Windows is needed for understanding its various BI... | Scott Duplichan |
2010-10-12 | We define IO_APIC_ADDR in <arch/ioapic.h>, let's use it. | Uwe Hermann |
2010-10-07 | Remove duplicate line from pci_ids.h. | Jonathan Kollasch |
2010-10-05 | - move EHCI_BAR_INDEX to ehci.h - it's constant as per EHCI spec 2.3.1 | Patrick Georgi |
2010-10-05 | Remove lib/ramtest.c-include from all CAR boards. | Patrick Georgi |
2010-10-02 | Allow selecting the physical USB Debug Port on AMD SB700. | Uwe Hermann |
2010-10-01 | Move CACHE_AS_RAM_ADDRESS_DEBUG out of romstage.c into Kconfig, | Patrick Georgi |
2010-09-30 | drop unneeded earlymtrr.c include | Stefan Reinauer |
2010-09-28 | Remove redundant HW_MEM_HOLE_SIZEK and HW_MEM_HOLE_SIZE_AUTO_INC settings. | Myles Watson |
2010-09-27 | RAMBASE = 0x4000 is no longer needed. Drop it. | Stefan Reinauer |
2010-09-25 | Drop some useless "../../../" in #includes (trivial). | Uwe Hermann |
2010-09-24 | Hook up all AMD SB600/SB700 boards to the EHCI Debug Port infrastructure. | Uwe Hermann |
2010-09-21 | Cut the crap. | Uwe Hermann |
2010-09-10 | Move memory type information out of some AMD sockets. | Myles Watson |
2010-09-07 | Remove unused ide0_enable and sata0_enable entries from SB7xx | Rudolf Marek |
2010-08-30 | We call this cache as ram everywhere, so let's call it the same in Kconfig | Stefan Reinauer |
2010-08-30 | Restructured all vendors' Kconfig files to no longer source the boards' | Jens Rottmann |
2010-08-26 | Remove unused mainboard_config definitions. Trivial. | Myles Watson |
2010-08-18 | The attached file add pa78vm5 dev3 detection function to avoid the building e... | Wang Qing Pei |
2010-08-17 | Commit (non-working!) Jetway PA78VM5 mainboard | Wang Qing Pei |
2010-08-01 | Clarify a comment on an old hack, remove the call to early_mtrr_init | Corey Osgood |
2010-07-06 | Re-integrate "USE_OPTION_TABLE" code. | Edwin Beasant |
2010-05-08 | Drop console/console.c and pc80/serial.c from mainboards' | Patrick Georgi |
2010-05-05 | Rename "apic" and "apic_cluster" to "lapic" and "lapic_cluster" | Patrick Georgi |
2010-04-22 | zero warnings days... | Stefan Reinauer |
2010-04-09 | This patch changes C7 CAR code to be a single assembler file instead | Stefan Reinauer |
2010-04-08 | Replace dual_core and quad_core CMOS (nvram) options with multi_core. Fix so... | Myles Watson |
2010-04-07 | - copy_and_run() gets the same calling convention on AMD and on all the others. | Stefan Reinauer |
2010-03-31 | Drop \r\n and \n\r as both print_XXX and printk now do this internally. | Stefan Reinauer |
2010-03-31 | This patch drops arch/i386/lib/console.c and arch/i386/lib/console_print.c and | Stefan Reinauer |
2010-03-29 | This drops the ASSEMBLY define from romstage.c, too | Stefan Reinauer |
2010-03-29 | __PRE_RAM__ is now correctly specified in the Makefile. No need to hack it into | Stefan Reinauer |
2010-02-27 | - make HAVE_HARD_RESET match what newconfig did | Patrick Georgi |
2010-02-25 | Move the ldscripts logic to src/arch/i386/Makefile.inc | Patrick Georgi |
2010-02-25 | Unify crt0s setup to src/arch/i386/Makefile.inc. This variable | Patrick Georgi |
2010-02-09 | Move all the copies of the romstage.inc rule to | Patrick Georgi |
2010-02-08 | janitor task: unify and cleanup naming. | Stefan Reinauer |
2010-02-07 | newconfig is no more. | Patrick Georgi |
2010-01-30 | * fix crt0s/ldscripts paths to fix out of tree build. | Stefan Reinauer |
2010-01-16 | coreboot has 13 instances of IOAPIC setup distributed across a lot | Stefan Reinauer |
2010-01-05 | * Explicitly add __PRE_RAM__ where it should be added. | Stefan Reinauer |
2009-10-26 | Add kconfig menus for most chipset VIDEO_MB values. | Uwe Hermann |
2009-10-20 | Fix all board names in Kconfig as per wiki / vendor website. | Uwe Hermann |
2009-10-17 | Move files from src/cpu/x86/{fpu,mmx,sse}/ to x86/ | Peter Stuge |
2009-10-16 | Drop enable_mmx.inc. It reads (only) "Enabling mmx registers is a noop" | Peter Stuge |
2009-10-16 | Set default ROM sizes per-board to match the ROM chip that came | Uwe Hermann |
2009-10-16 | Drop unused and useless CONFIG_MAX_PCI_BUSES. | Uwe Hermann |
2009-10-15 | Add CONFIG_GENERATE_* for tables so that the user can select which tables not | Myles Watson |
2009-10-07 | More boards in kconfig, and moved -O2 flag for romcc into | Patrick Georgi |
2009-10-04 | This does away with CONFIG_ROM_PAYLOAD_START and CONFIG_PAYLOAD_SIZE. | Patrick Georgi |
2009-10-03 | Remove: | Patrick Georgi |
2009-09-23 | simplify source tree hierarchy: move files from sdram/ and ram/ to lib/ | Stefan Reinauer |
2009-08-12 | Kconfig! | Patrick Georgi |
2009-08-11 | Enable CBFS everywhere. All boards compiled for me (abuild tested), | Patrick Georgi |
2009-06-30 | the tool chain settings should not be in renamed (as they will never live in | Stefan Reinauer |
2009-06-30 | This patch unifies the use of config options in v2 to all start with CONFIG_ | Stefan Reinauer |
2009-06-19 | Undo my ugly commit that added uses clauses in lots of places instead of one. | Myles Watson |
2009-06-17 | Fix configuration of boards that didn't have uses CONFIG_USE_INIT. Trivial. | Myles Watson |
2009-06-06 | When I started refactoring mainboard Config.lb, I added two different | Carl-Daniel Hailfinger |
2009-04-21 | Thanks to Myles' patch adding support for include statements, | Carl-Daniel Hailfinger |
2009-04-14 | v2/src romfs->cbfs rename | Peter Stuge |
2009-04-13 | I need to do uses HAVE_ACPI_RESUME for each board. Here we go. | Rudolf Marek |
2009-04-01 | Drop CONFIG_CHIP_NAME. Those config statements in Config.lb should | Stefan Reinauer |
2009-03-31 | Add the CONFIG_ROMS config variable. | Ronald G. Minnich |
2009-02-18 | Carl-Daniel's part: | Carl-Daniel Hailfinger |
2008-12-19 | I honestly have no idea if the previous use of the vt8235's serial functions | Corey Osgood |