summaryrefslogtreecommitdiff
path: root/src/mainboard/intel
AgeCommit message (Collapse)Author
2021-11-09pci_mmio_cfg: Always use pci_s_* functionsNico Huber
When MMIO functions are available, the pci_s_* functions do exactly the same thing. Drop the redundant pci_mmio_* versions. Change-Id: I1043cbb9a1823ef94bcbb42169cb7edf282f560b Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58333 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2021-11-09ChromeOS: Fix <vc/google/chromeos/chromeos.h>Kyösti Mälkki
Change-Id: Ibbdd589119bbccd3516737c8ee9f90c4bef17c1e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58923 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-11-05mb/google,intel: Fix indirect include bootmode.hKyösti Mälkki
Change-Id: I9e7200d60db4333551e34a615433fa21c3135db6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-02mb/intel/adlrvp: Configure EC in RW GPIOAnil Kumar
EC_IN_RW signal from EC GPIO is connected to GPIO E7 of SOC. This GPIO can be used to check EC status trusted (LOW: in RO) or untrusted (HIGH: in RW). Branch=none Bug=none Test=Issue manual recovery and confirm DUT is entering recovery mode on ADL-M RVP. Signed-off-by: Anil Kumar <anil.kumar.k@intel.com> Change-Id: I20804db450ab0b3ebe19c51ba2b294a0137d81a7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58099 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-01soc/intel/braswell: Set GNVS DPTE via devicetreeAngel Pons
Introduce the `dptf_enable` devicetree setting to set the DPTE GNVS field, as newer Intel platforms do. Change-Id: I88b746c64ca57604f946eefb00a70487a2fb27c0 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57988 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2021-10-29Revert "mb/intel/adlrvp: Remove EC region"Bernardo Perez Priego
This reverts commit 0a1602217fd0d60c59a497cb83a23b44cf4973d9. EC region is required in order to provide unified coreboot image for Chrome and Windows SKU RVP's. Also removing EC region causes a regression for ADL-P platforms. With this patch EC region is included back into flash map. Change-Id: I0f7f2b5dd392b08e1978a3b3f3236eac0dab1f12 Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58661 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2021-10-26intel/adlrvp: Add sub-regions to SI_ME in chromeos.fmdFurquan Shaikh
This change adds sub-regions to SI_ME in chromeos.fmd. These are required to support stitching of CSE components. BUG=b:189177538 Change-Id: Ife48aafcec43555175aad44f8b6307beeaea9184 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58592 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-20mb/intel/adlrvp: Rework KconfigFelix Singer
Rework Kconfig file that each variant has its own config option with their specific selects / configuration and move common selects to `BOARD_INTEL_ADLRVP_COMMON`, which is used as base for each variant. Also, move selects from Kconfig.name to Kconfig that the configuration is at one place and not distributed over two files. Built each variant with `BUILD_TIMELESS=1` and all generated coreboot.rom files remain identical. Excluded the .config file by disabling `INCLUDE_CONFIG_FILE` to make this reproducible. Change-Id: If68c118f22579cc0a3db570119798f0f535f9804 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56221 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-20mb/intel/adlrvp_m: Enable touchpadBernardo Perez Priego
These changes include ELAN touchpad to ACPI tables and configure GPIO's. BUG=None Test=Boot board, touchpad should be functional Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Change-Id: I78e5e133f7d3af47395819a79638a90fee4fd19e Reviewed-on: https://review.coreboot.org/c/coreboot/+/57863 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
2021-10-20mb/intel/adlrvp: Remove EC regionBernardo Perez Priego
Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Change-Id: Ic76c29069beb510dd7620f340e0aab212668c3f3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58235 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
2021-10-20mb/intel/jasperlake_rvp: Rework KconfigFelix Singer
Rework Kconfig file that each variant has its own config option with their specific selects / configuration and move common selects to `BOARD_INTEL_JASPERLAKE_RVP_COMMON`, which is used as base for each variant. Also, move selects from Kconfig.name to Kconfig that the configuration is at one place and not distributed over two files. Built each variant with `BUILD_TIMELESS=1` and all generated coreboot.rom files remain identical. Excluded the .config file by disabling `INCLUDE_CONFIG_FILE` to make this reproducible. Change-Id: Ic7552195ed5a3ae6ab8e456d7d38d5539a052009 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56222 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2021-10-19mb/intel/kblrvp: Rework KconfigFelix Singer
Rework Kconfig file that each variant has its own config option with their specific selects / configuration and move common selects to `BOARD_INTEL_KBLRVP_COMMON`, which is used as base for each variant. Built each variant with `BUILD_TIMELESS=1` and all generated coreboot.rom files remain identical. Excluded the .config file by disabling `INCLUDE_CONFIG_FILE` to make this reproducible. Change-Id: I2a9c12a15c098fcb64c006a707c94a1aed93d73a Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56219 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-10-19mb/intel/coffeelake_rvp: Rework KconfigFelix Singer
Rework Kconfig file that each variant has its own config option with their specific selects / configuration and move common selects to `BOARD_INTEL_COFFEELAKE_COMMON`, which is used as base for each variant. Also, move selects from Kconfig.name to Kconfig so that the configuration is at one place and not distributed over two files. Built each variant with `BUILD_TIMELESS=1` and all generated coreboot.rom files remain identical. Excluded the .config file by disabling `INCLUDE_CONFIG_FILE` to make this reproducible. Change-Id: I3b3d3cff5ea7a3f4d1c4ddd911240763e4891e06 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56217 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Thomas Heijligen <src@posteo.de>
2021-10-19cpu/intel/speedstep: Constify `get_cst_entries()`Angel Pons
Make the `get_cst_entries()` function provide a read-only pointer. Also, constify the actual data where applicable. Change-Id: Ib22b3e37b086a95af770465a45222e9b84202e54 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58393 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-18mb/intel/adlrvp_m: Enable retimer force power gpioBernardo Perez Priego
Retimer FORCE_PWR GPIO is a debug GPIO, that has to be set LOW, to allow Retimer LC Domain to toggle during a switch from DP Alt to TBT Alt modes. Contrary to DS specifying it may be left unconfigured, hence floating, there are instances seen during boot, where it stays HIGH (adlmrvp) or LOW (adlprvp). Hence configure it to LOW. Branch=none Bug=none Test=Boot to OS, connect TBT dock which enumerates in DP Alt, Login, TBT dock enumerates in TBT Alt Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Change-Id: I0ff58823785a31c70535ad9c913c06a653884a2c Reviewed-on: https://review.coreboot.org/c/coreboot/+/58113 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
2021-10-17soc/intel/skylake: switch to common GNVSMichael Niewöhner
Switch to common GNVS. No additional fields to those being present in common GNVS are used by any SKL/KBL device. Thus, they're dropped completely. Change-Id: I87ab4ab05f6c081697801276a744d49e9e1908e0 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57946 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2021-10-17Skylake boards: Drop setting useless `IRQ_SLOT_COUNT`Angel Pons
The `IRQ_SLOT_COUNT` value is only meaningful when generating a PIRQ table. None of these boards do it, so specifying this value achieves absolutely nothing. Drop it to prevent further useless copy-pasting. Change-Id: I2d63b850c03fc1471c0eef180e8b621311b2c336 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58362 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-10-15mainboard: Drop invalid `VGA_BIOS_FILE` defaultsAngel Pons
If the VGA BIOS file path for `VGA_BIOS_FILE` in a mainboard's Kconfig does not exist in the coreboot tree (including submodules), drop it. These files should be stored in the `site-local` subdirectory and the paths specified for each board in `site-local/Kconfig`. For example: config VGA_BIOS_FILE default "site-local/x200_vbios.bin" if BOARD_LENOVO_X200 Note that this is just an example. There are better ways to structure one's `site-local` subfolder. Using the `CONFIG_MAINBOARD_DIR` option would be one of them, though variants may still need special handling. Also, update autoport to not generate `VGA_BIOS_FILE` defaults. Change-Id: I1b5dfba035a42d7943f270f95fb7d32b285584d2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51340 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-10-08mb/intel/adlrvp: Drop INTEL_CAR_NEM Kconfig select on ADL-M RVPBora Guvendik
This patch enables eNEM flow for ADL-M TEST=Able to build and boot ADL-M RVP using eNEM mode. Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: I69959f4c53f4073e6e8b51491747d8358b4c907b Reviewed-on: https://review.coreboot.org/c/coreboot/+/57323 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2021-10-05src/mainboard to src/security: Fix spelling errorsMartin Roth
These issues were found and fixed by codespell, a useful tool for finding spelling errors. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ie34003a9fdfe9f3b1b8ec0789aeca8b9435c9c79 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58081 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-10-04mb/intel/adlrvp{p,m}: Enable dynamic GPIO PMMeera Ravindranath
GPIO PM was disabled for adlrvp to evaluate if longer interrupt pulses are required for ADL. Since ADL requires 4us long pulses (EDS:626817), GPIO PM can be enabled. This change drops the GPIO PM override and re-enables dynamic GPIO PM. TEST=Boot adlrvp to OS, ensure no TPM timeout errors. Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Change-Id: I0b7b66b5525d8b80775ab7578ce6b12181af7882 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57411 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-10-01mb/intel/adlrvp: set PL4 value dynamically for thermalSumeet Pawnikar
Set PL4 value dynamically for adlrvp board based on CPU SKUs which is detectable at runtime. These values are based on platform design specification. BUG=None BRANCH=None TEST=Build FW and test on adlrvp board On 682: Overriding power limits PL1 (4000, 28000) PL2 (64000, 64000) PL4 (140000) Change-Id: I9c0c418e2548cc7f9aa647a5ad98123b33e9f9b8 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57464 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-01mb/intel/adlrvp: set power limits dynamically for thermalSumeet Pawnikar
Set power limit values dynamically based on CPU TDP and PCI ID of SKU. These values are as per platform design specification. BUG=None BRANCH=None TEST=Build FW and test on adlrvp board Change-Id: I8ba901fe7c978aad43b85a860c71b33bfbff2ff5 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57462 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-30mb/intel/adlrvp_m: correct SSD power sequenceSelma Bensaid
This is to fix SSD detectiong failure in warm boot observed on ADL-M RVP. This patch implements the coreect power sequence: SSD_PREST Low - SSD_PWR_EN High - SSD_PREST High Signed-off-by: Selma Bensaid <selma.bensaid@intel.com> Change-Id: If6f9fc17a30c28c2948809cdbade9919d4ddd6c5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58027 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-09-30mb/intel/adlrvp: Update Rcomp target value for DDR4 RVP SKUSubrata Banik
Update to recommended Rcomp drive strength value for DDR4 as per MRC team's input. Additionally, add space around the `targets` array. Change-Id: Ied63913db94b2e52ab394a66c70f7edfd507d99a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58036 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-29mb/intel/adlrvp, mb/google/brya: Add ADLP 242 PLx configurationsTracy Wu
Add ADLP 242 sku PLx related settings, which follow the settings of ADLP 282 sku (both are 15w). BUG=b:201253904 TEST=USE='fw_debug' emerge-brya intel-adlfsp coreboot chromeos-bootimage Change-Id: If9b60893ab3e2c4a88e7d2cf45223c5fbce6f847 Signed-off-by: Tracy Wu <tracy.wu@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57992 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-09-27mb/intel/kblrvp: Clean up dsdt.aslFelix Singer
Move includes using library paths to the top and remove unnecessary comments. Also, get rid of that unnecessary _SB scope. Use an absolute path for the PCI0 device instead. Change-Id: Ibb63f3ecd9cfbb6f564e0a9968c2776c25d84f79 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57856 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-27mb/intel/kunimitsu: Clean up dsdt.aslFelix Singer
Move includes using library paths to the top and remove unnecessary comments. Change-Id: I42458f16a323d3e37d0ee1bd8335e1f8d0e1fadc Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57851 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-27mb/intel/saddlebrook: Clean up dsdt.aslFelix Singer
Move includes using library paths to the top and remove unnecessary comments. Also, get rid of that unnecessary _SB scope. Use an absolute path for the PCI0 device instead. Change-Id: I730cd3eeffff60b3b569bfb748febbdc8ca85990 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57850 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-24mb/intel/adlrvp: Switch to using device pointersFurquan Shaikh
This change replaces the device tree walks with device pointers by using alias for dptf_policy device. Change-Id: I02ca63ac2cc1b8ed2f5a381b3824c9beff7f33ec Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57870 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-23mb/intel/adlrvp_m: Enable HECI1 communicationzhixingma
The patch enables HECI1 interface to allow OS applications to communicate with CSE. TEST=Verify PCI device 0:16.0 exposed in the lspci output Signed-off-by: zhixingma <zhixing.ma@intel.com> Change-Id: Ifd338345caa183f03097f1003080992da70296ff Reviewed-on: https://review.coreboot.org/c/coreboot/+/57813 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2021-09-17broadwell boards: Reflow USB2 parameter statementsAngel Pons
These statements fit on a single line. Reflow them to ease future works. Change-Id: Ie18e9a00f67b999fdcedcab3c28b68e34bc93da4 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55814 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-09-16mb/intel/adlrvp: Override Type-C IOM GPIO Pads based on Board IDSubrata Banik
This patch allows ADL-RVP mainboards to set AUX GPIO PADs based on the board id value. Various ADL-P and ADL-M RVPs SKUs demand different GPIO AUX programming hence, this patch implements a helper function inside `adlrvp` mainboard to override devicetree chip config. Note: Different ADL-P/M SKUs (LP4/LP5/DDR4/DDR5) don't have dedicated devicetree for overrides hence, board id is being used for unique SKU identification. Additionally, skip AUX GPIO PAD filling up for Windows SKUs. TEST=Able to override AUX GPIO PADs based on ADL-P RVP board id. Change-Id: I2f0a37c7a8bd69af715551df2a93e6eed89e954a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57532 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-14mb/intel/adlrvp_p: Enable TCSS USB ports device pathMeera Ravindranath
TEST=Boot RVP, ensure Type C ports operate correctly. Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Change-Id: Iadc0df2e6e29a5afbcbb7db1ae0be6546dbcdc1a Reviewed-on: https://review.coreboot.org/c/coreboot/+/57274 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2021-09-13mb/intel/tglrvp: Enable USB4 resources using SoC KconfigFurquan Shaikh
This change uses the newly added `SOC_INTEL_ENABLE_USB4_PCIE_RESOURCES` Kconfig to enable USB4 resources and drops the configuration in mainboard. Change-Id: I707c5d63ea8c58e72126fe0d319ba81a99221ba5 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57127 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-13mb/adlrvp: Add new ADL P board variant for MCHP1727Brandon Breitenstein
Add new board variant to enable MCHP1727 Modular EC Card on RVP BUG=b:179214042 BRANCH=none TEST=emerge brya and verify that adlrvp_p_mchp images boot Change-Id: I9dc96ad5c5db21fedbe480d19fcae8434d3bd169 Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56839 Reviewed-by: Vijay P Hiremath <vijay.p.hiremath@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-10cannonlake mainboards: Set PMC as hidden in devicetreeTim Wawrzynczak
FSP-S hides the PMC from the PCI bus when it runs, but there are still initialization steps coreboot programs for the PMC. Therefore, change all of the cannonlake mainboards to set the PMC as hidden in the devicetree, which means the device will be skipped during enumeration, but device callbacks are still issued as if the device were enabled. TEST=Ran full patch train on google/dratini, disassembled SSDT and the PEPD device matches what is in pep.asl. Also verified via dmesg that the INT33A1 device is still initialized by the kernel. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ib4a20ce9075ce7653388a5d3e281fe774bf89355 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56008 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-09-06mb/intel/shadowmountain: Enable SaGv supportV Sowmya
Signed-off-by: V Sowmya <v.sowmya@intel.com> Change-Id: I15203920546363466eef567136821b59dda763b0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54648 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-06mb/intel: Drop unused `GPIO_MEM_CONFIG_.` definesAngel Pons
These defines are copy-paste leftovers from Kunimitsu. However, neither Saddle Brook nor KBLRVP use memory-down, so drop the unneeded defines. Change-Id: I396aeaa634f619be7be0ee97c0cab1c682f53ff2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57231 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-09-06mb/intel/kblrvp: Drop redundant overridetree lineAngel Pons
The I2C #5 device is already disabled in the devicetree. Change-Id: Ia4970dc07ef57e8184bce395a446974a22eddb08 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57230 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-09-06mb/intel/kblrvp: Mark disabled SerialIO devices as `off`Angel Pons
Disable devicetree devices disabled in the `SerialIoDevMode` array. These devices get disabled by FSP-S, and coreboot doesn't see them. Change-Id: I8dbb45c96eae5188e5999df9a458f06f6b196adf Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57229 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-09-06mb/intel/kblrvp: Do not use Legacy mode for UART #2Angel Pons
All KBLRVP variants select the `INTEL_LPSS_UART_FOR_CONSOLE` Kconfig option and set `UART_FOR_CONSOLE` to `2`, so that UART #2 is used as coreboot console. However, the LPSS console driver requires the LPSS UART to be memory-mapped (and not I/O-mapped, like Super I/O UARTs). KBLRVP variant RVP8 uses `PchSerialIoLegacyUart` for UART #2, which makes FSP-S configure UART #2 in legacy, I/O-mapped mode. This most likely results in the UART console not working after FSP-S has run. This change updates RVP8 to use `PchSerialIoSkipInit` for UART #2, like the other KBLRVP variants do. Change-Id: Ic5c78f5895fe1dd5e7be6ef7aec3de6940dd2475 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57228 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-09-06mb/intel/kblrvp: Drop commented-out SD card configAngel Pons
This is most likely a copy-paste remnant, and will never be needed for RVP8: the SDXC device does not exist on PCH-H (and RVP8 uses a PCH-H). Change-Id: I69059a88dcdb032beaab5fb03981dccbae0db02e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57227 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-09-06mb/intel/kblrvp: Disable I2C #4 and #5 on PCH-HAngel Pons
The I2C #4 and I2C #5 devices do not exist on PCH-H. Disable the devices using the PCH-H variants' overridetrees (the base devicetree enables I2C #4), set the `SerialIoDevMode` entries to `PchSerialIoDisabled` and drop inapplicable I2C #4 voltage settings. Change-Id: I56f34fa2004993d2123ccd5c1008fd71682ec2bd Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57226 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-09-06soc/intel/adl: Move USB4 hotplug Kconfig to commonFurquan Shaikh
This change adds a new Kconfig `SOC_INTEL_ENABLE_USB4_PCIE_RESOURCES` that can be selected by mainboard to reserve hotplug resources for USB4 at the SoC level. `ADL_ENABLE_USB4_PCIE_RESOURCES` is dropped from soc/intel/alderlake and instead the newly added Kconfig is now used. This new Kconfig is added so that the same config can be used across different platforms. In following changes, this Kconfig is utilized by TGL as well. Change-Id: Id7c359a0e255c43c2732f6cbe287bc7da14a46e3 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57124 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-05mb/intel/adlrvp: Clean up the print messageBora Guvendik
TEST=none Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: I6346b087543217c78f87751051a4f38b23c566d2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57389 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2021-09-05mb/intel/leafhill,minnow3: remove FSP_M_CBFS and FSP_S_CBFS overrideFelix Held
The overrides set the options to the same value as drivers/intel/fsp2_0/ Kconfig does, so drop the overrides. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I53922786382a2e7d29b3df560a1998f41e1d2ea8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57350 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-09-05mb/intel/leafhill,minnow3: remove FSP_M_FILE and FSP_S_FILE overrideFelix Held
Normally, selecting FSP_USE_REPO will select FSP_FULL_FD which then will configure the proper paths for FSP_M_FILE and FSP_S_FILE. The override in these two boards caused FSP_M_FILE and FSP_S_FILE being empty despite ADD_FSP_BINARIES being selected by FSP_USE_REPO which is an invalid case that needs to be avoided, so remove the board-level override of those two options. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I20c8cebea8327d59f0f33d05b824a74bf2121f4b Reviewed-on: https://review.coreboot.org/c/coreboot/+/57347 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-09-05mb/intel/leafhill,minnow3: remove ADD_FSP_BINARIES config overrideFelix Held
The ADD_FSP_BINARIES override in the mainboard's Kconfig caused this option to not be selected when FSP_USE_REPO is selected. Remove the override to fix this problem. These two boards are the only ones in tree that had an override for this option, so now the ADD_FSP_BINARIES option is only defined in drivers/intel/fsp2_0/Kconfig. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I23439f3134eef9460625addbff7efd64c5f65ae5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57346 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-09-03mb/intel/adlrvp_m: Fix TPM IRQ conflict with I2C4Selma Bensaid
Add TPM IRQ config to gpio_m.c, so the TPM IRQ is not allocated to I2C4. BUG=NA BRANCH=None TEST= boot to os and check cat /proc/interrupts, cr50 SPI interrupt is assigned and does not conflict with I2C. CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7 CPU8 CPU9 CPU10 CPU11 0: 36 0 0 0 0 0 0 0 0 0 0 0 IO-APIC 2-edge timer 1: 0 0 0 0 0 0 0 0 9 0 0 0 IO-APIC 1-edge i8042 8: 0 0 0 0 0 0 0 0 0 0 0 0 IO-APIC 8-edge rtc0 9: 0 0 0 0 0 0 0 0 0 0 0 0 IO-APIC 9-fasteoi acpi 14: 0 0 0 0 0 0 0 0 0 0 0 0 IO-APIC 14-fasteoi INTC1055:00 16: 0 0 0 0 0 0 0 0 0 0 4 0 IO-APIC 16-fasteoi intel-ipu6 22: 0 13 0 0 0 0 0 0 0 0 0 0 IO-APIC 22-fasteoi idma64.4, i801_smbus, ttyS0 37: 0 0 0 0 0 0 0 0 0 0 0 0 IO-APIC 37-fasteoi idma64.0, i2c_designware.0 38: 0 0 0 0 0 0 0 0 0 0 4 0 IO-APIC 38-fasteoi idma64.1, i2c_designware.1 41: 0 0 0 0 2274 0 0 0 0 0 0 0 IO-APIC 41-edge cr50_spi 42: 0 0 0 0 0 0 0 0 0 0 0 0 IO-APIC 42-fasteoi idma64.2, i2c_designware.2 43: 4 0 0 0 0 0 0 0 0 0 0 0 IO-APIC 43-fasteoi idma64.3, i2c_designware.3 Signed-off-by: Selma Bensaid <selma.bensaid@intel.com> Change-Id: Id0f3885dec5a6f635254c233709090321491c739 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57102 Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-03mb/intel/adlrvp: Move common Kconfig from mb Kconfig.name to KconfigSubrata Banik
CONFIG_DRIVERS_INTEL_MIPI_CAMERA and CONFIG_SOC_INTEL_COMMON_BLOCK_IPU are getting selected for all ADLRVPs irrespective of ADL-P and ADL-M (internal and external EC SKUs) hence, select those Kconfigs from mainboard Kconfig rather Kconfig.name. Also, select DRIVERS_INTEL_SOUNDWIRE as per alphabetical order. TEST=No changes are seen while the .config file is getting auto generated. Change-Id: I62d5ec19c3364da79ebe7287b1b3d6eb2a0efca0 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57314 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-03skylake: Default to `BOARD_TYPE_DESKTOP` for PCH-HAngel Pons
Set the `UserBd` FSP-M UPD to `BOARD_TYPE_DESKTOP` by default on PCH-H. Remove now-redundant mainboard code to set the `UserBd` UPD. Change-Id: I349abe5d89f562c158ce9baadbca2b2f56695846 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57261 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-03src/*: Specify type of `DIMM_SPD_SIZE` onceAngel Pons
Specify the type of the `DIMM_SPD_SIZE` Kconfig symbol once. Change-Id: I619833dbce6d2dbe414ed9b37f43196b4b52730e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57257 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-08-30mb/intel/adlrvp_m: Fix to Enable PCIe x1 SlotCliff Huang
This fix will enable PCIe x1 slot for ADL-M LP4 and LP5 RVPs. The BDF for this PCIe slot is pci is: 0000:00:1d.0 TEST = show device command: $ lspci -s 00:19.0 expect this: 00:19.0 Serial bus controller [0c80]: Intel Corporation Device 51c5 Signed-off-by: Cliff Huang <cliff.huang@intel.com> Change-Id: Ia988fa0b5d8fefe68503b39843aab06c4229b36f Reviewed-on: https://review.coreboot.org/c/coreboot/+/57053 Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-28mainboard/intel/harcuvar: Remove hardcoded lapic 0 from devicetree.cbMariusz Szafrański
This change follows other Intel SoCs common way to support SKUs with bsp lapic_id != 0 by removing hardcoded lapic 0 from devicetree.cb and allowing its detection at boottime. It completes support for HCV/DNV after base SoC patch: commit ba936ce5db819d5ecb34e83a998b2390ecbdc4b9 soc/intel/denverton_ns: Ensure CPU device has a valid link Link: https://mail.coreboot.org/hyperkitty/list/coreboot@coreboot.org/thread/YLMK2FBWWL6RKDNKBVZB3NJDYMEYHED7/ "A different lapic number in devicetree.cb needed for CPU with the same SKU and steping (Intel Atom C3538)." Change-Id: I88f60f64d2beb2768ec9833de582d7901f456b11 Signed-off-by: Mariusz Szafrański <mariuszx.szafranski@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57158 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: King Sumo <kingsumos@gmail.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-08-28soc/intel/common: Use CHIPSET_LOCKDOWN_COREBOOT by defaultFelix Singer
Since all mainboards use `CHIPSET_LOCKDOWN_COREBOOT`, make it the default by changing its enum value to 0 and remove its configuration from all related devicetrees. If `common_soc_config.chipset_lockdown` is not configured with something else in the devicetree, then `CHIPSET_LOCKDOWN_COREBOOT` is used. Also, add a release note for the upcoming 4.15 release. Change-Id: I369f01d3da2e901e2fb57f2c83bd07380f3946a6 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56967 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-08-28mb/intel/adlrvp_m: Enable touchscreenBernardo Perez Priego
This will add ACPI information to enable WACOM touchscreen. TEST=Boot DUT and issue command: $ ls -al /sys/bus/i2c/devices WACOM PWB-D893 device should be listed and touchscreen should be functional. Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Change-Id: I37c0831485135fda3284dda6b61f4825b7fc51a3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56247 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
2021-08-27broadwell: Drop weak `mainboard_fill_spd_data` definitionAngel Pons
Make `mainboard_fill_spd_data` mandatory and adapt mainboards to define this function accordingly. Change-Id: Ic18c4c574e8c963bbb41c980f43bdbacc57735af Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55806 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-27mb/intel/adlrvp: Enable SaGv supportV Sowmya
BUG=b:187446498 TEST=Boot and verify memory trains at all the SaGv points through FSP debug logs. Signed-off-by: V Sowmya <v.sowmya@intel.com> Change-Id: I883ae50b07e7b1d5554763fd79079d40b264b721 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54647 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Balaji Manigandan <balaji.manigandan@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2021-08-24Revert "soc/intel/broadwell/pch: Replace ACPI device NVS"Furquan Shaikh
This reverts commit 68d8357dab55660058ad1ab8dca34fd03e0adbb5. Reason for revert: Device NVS is expected by mainboard samus in payload depthcharge: https://chromium.googlesource.com/chromiumos/platform/depthcharge/+/932c6ba2704987c0db64dbdfe03c158482c7ab11/src/board/samus/board.c#60 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Icb5fa6da3412a51aae56c3658163e5b98d57bab3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54977 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-08-19mb/intel/adlrvp: Drop INTEL_CAR_NEM Kconfig select on ADL-P RVPSubrata Banik
This patch enables eNEM flow for Alder Lake SoC hence drop INTEL_CAR_NEM Kconfig from ADL-P RVP. ALDERLAKE_CAR_ENHANCED_NEM Kconfig will select all relevant Kconfig required to enable eNEM for Alder Lake. Additionally, select INTEL_CAR_NEM Kconfig for ADL-M RVPs from Kconfig.name. BUG=b:168820083 TEST=Able to build and boot ADL-P RVP using eNEM mode. Change-Id: I08561c8f50bbc4afe2bcdff4cc50e74d8fa2f68e Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48345 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-19soc/intel/alderlake: Move INTEL_CAR_NEM selection from SoC to mainboardSubrata Banik
This patch decouples the selection of eNEM feature enablement from SoC to ensure the ADLRVP does the validation first prior enabling this feature on OEM/ODM reference designs. BUG=b:168820083 TEST=No changing is being observed in .config with and without this CL. Change-Id: I709185159d9869501b1d8e8d00f6d25ec77838bf Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56993 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-08-16mb/*/{tglrvp,volteer,deltaur}: move cpu_cluster configuration to chipset.cbMAULIK V VAGHELA
For mainboard devicetree, it always have definition for enabling cpu_cluster 0 which is required for all the variants. Since it is SoC related settings, it's better to keep in chipset.cb as a common setting for all the mainboards using the same SoC. BUG=None BRANCH=None TEST=Change has no functional impact on the brya board. Change-Id: I20bf1a87c7a9b343a86053692617c127a1a3250d Signed-off-by: MAULIK V VAGHELA <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56955 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-16mb/*/{tglrvp,volteer,deltaur}: Remove hardcoding of BSP APIC IDMAULIK V VAGHELA
coreboot always assumes that BSP APIC ID will be 0 and core enumeration logic will look for lapic id from the mainboard. As per Intel 64 and IA-32 Architectures Software Developer’s Manual Volume 3: 8.4.1 BSP and AP Processors, this assumption might not hold true and we may have any other core as BSP. To handle this, we need to remove hardcoding of APIC ID 0 from mainboard. BUG=None BRANCH=None TEST=Check if there is no functional impact on the board. Change-Id: I175ae26f934f08e125bea7cc3195bdb5792c2360 Signed-off-by: MAULIK V VAGHELA <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56954 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-16mb/intel/adlrvp_m: Enable CR50 TPM support over SPIThejaswani Puta thejaswani.putta@intel.com
Add Kconfig options and enable TPM device in devicetree BUG=None TEST=Booted the image and checked the successful TPM communication in verstage,romstage & ramstage from coreboot logs. Signed-off-by: Thejaswani Puta thejaswani.putta@intel.com <thejaswani.putta@intel.com> Change-Id: Icaedf9f17e35e82c35cbabd6d2938c167e42e9e8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54023 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
2021-08-13mb/intel/adlrvp: Update DIMM type as memory down for DDR5 MR SKUMeera Ravindranath
DDR5 Maple Ridge SKU (Board ID 0x16) uses a Memory down DIMM configuration. TEST=Boot DDR5 MR SKU to OS. Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Change-Id: I0b7a96b5534d8b80776aa7578ce7c13181af7882 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56881 Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-13mb/intel/adlrvp: Rename spd_info struct based on memory topologyMeera Ravindranath
Naming spd_info struct based on memory topology helps in reuse of code. lp4_lp5_spd_info -> memory_down_spd_info ddr4_ddr5_spd_info -> dimm_module_spd_info Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Change-Id: I0b7a66b5524d8b80776ab7578ce7b13181af7882 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56899 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2021-08-13mb/intel/adlrvp: Use HDA TMODE 8T to match spec for ADL P RVPSathya Prakash M R
With current setting Display audio codec probe fails. Hence HDMI/DP audio fails. Earlier, with FSP 2037 was used the mode was incorrectly programmed to 4T This setting was carried ahead with below change: Commit : 50f8b4ebdd7db8077b87ab7686637599c9d93af3 The issue was fixed in later FSPs and with current FSP v2237, we need to set the TMODE to 8T as per spec. TEST=Verify HDMI/DP Playback on ADL P RVP Fixes: 50f8b4ebdd7db8077b87ab7686637599c9d93af3 (soc/intel/alderlake: Add enum for HDA audio configuration) Signed-off-by: Sathya Prakash M R <sathya.prakash.m.r@intel.com> Change-Id: Ia39a33f5da2fea0dc2eaf4eae45999a711c61c33 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56208 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Balaji Manigandan <balaji.manigandan@intel.com> Reviewed-by: Meera Ravindranath <meera.ravindranath@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-10mb/intel/adlrvp: create dynamic power limits mechanism for thermalSumeet Pawnikar
Add dynamic power limits selection mechanism for aldrvp board. BUG=None BRANCH=None TEST=Build FW and test on adlrvp with DPTF tool On adlrvp (282): Overriding DPTF power limits PL1 (3000, 15000) PL2 (55000, 55000) On adlrvp (682): Overriding DPTF power limits PL1 (5000, 45000) PL2 (115000, 115000) Change-Id: Id1aef0125c6e1e105665172f19bda271e232d94f Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56880 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-08-10mb/*/{brya,adlrvp}: move cpu_cluster static configuration to chipset.cbMAULIK V VAGHELA
For mainboard devicetree, it always have definition for enabling cpu_cluster 0 which is required for all the variants. Since it is SoC related settings, it's better to keep in chipset.cb as a common setting for all the mainboards using the same SoC. BUG=None BRANCH=None TEST=Change has no functional impact on the brya board. Change-Id: I8f7c3184b62f8d84ca4605fb9f2a1cc569f1f964 Signed-off-by: MAULIK V VAGHELA <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56853 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-10mb/*/brya/adlrvp: Remove hardcoding of BSP APIC IDMAULIK V VAGHELA
coreboot always assumes that BSP APIC ID will be 0 and core enumeration logic will look for lapic id from the mainboard. As per Intel 64 and IA-32 Architectures Software Developer’s Manual Volume 3: 8.4.1 BSP and AP Processors, this assumption might not hold true and we may have any other core as BSP. To handle this, we need to remove hardcoding of APIC ID 0 from mainboard. BUG=None BRANCH=None TEST=Check if there is no functional impact on the board. Change-Id: Ibc60494b0032a3139c1e6c79251fb2da750c8de8 Signed-off-by: MAULIK V VAGHELA <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56852 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2021-08-09mb/intel/adlrvp: Support VBT binaries for LP4 and LP5Bernardo Perez Priego
This will enable to include multiple VBT binaries in a single image and load corresponding file according to HW configuration. BUG=None TEST= Boot device on LP5/LP4, corresponding VBT file should be loaded. Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Change-Id: Iace0e5e0783b2074393a537da8cc645102d2acda Reviewed-on: https://review.coreboot.org/c/coreboot/+/55969 Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-09mb/*/jslrvp/dedede: Remove hardcoding of BSP APIC IDMAULIK V VAGHELA
coreboot always assumes that BSP APIC ID will be 0 and core enumeration logic will look for lapic id from the mainboard. As per Intel 64 and IA-32 Architectures Software Developer’s Manual Volume 3: 8.4.1 BSP and AP Processors, this assumption might not hold true and we may have any other core as BSP. To handle this, we need to remove hardcoding of APIC ID 0 from mainboard. BUG=None BRANCH=None TEST=Check if there is no functional impact on the board. Change-Id: I726d70b4ffc35a28a654abbd20c866f1410e1aee Signed-off-by: MAULIK V VAGHELA <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56759 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-08-05mb/intel/adlrvp: Add probed fw_configs to SMBIOS OEM stringsAnil Kumar
This feature was added in ADL-M RVP for discovering correct audio topology using OEM string e.g., "ADL_MAX98373_ALC5682I_I2S" for discovering boards having audio expansion card Bug=None Test= With CBI FW_CONFIG set to 0x100 localhost /home/root # dmidecode -t 11 Getting SMBIOS data from sysfs. SMBIOS 3.0 present. Handle 0x0009, DMI type 11, 5 bytes OEM Strings String 1: ADL_MAX98373_ALC5682I_I2S Change-Id: I05887d9d654eae6d9d2da731d8ab4cf4a05c287f Signed-off-by: Anil Kumar <anil.kumar.k@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55368 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-05mb/intel/adlrvp_m: Enable SaGv supportBora Guvendik
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: I80f11b8f0c2a1fdccbc322c3c4783c61684ff37a Reviewed-on: https://review.coreboot.org/c/coreboot/+/55634 Reviewed-by: Selma Bensaid <selma.bensaid@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-29mb/intel/ehlcrb: Select LPSS console by defaultLean Sheng Tan
Select `INTEL_LPSS_UART_FOR_CONSOLE` to allow using PCH UART 2 as coreboot console. Also, simplify `UART_FOR_CONSOLE` defaults. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I853777116fc541e5dc31f3ca8673f8bf66c7c9e1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56423 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-07-26mb/*: Specify type of `VARIANT_DIR` onceAngel Pons
Specify the type of the `VARIANT_DIR` Kconfig symbol once instead of doing so on each and every mainboard. Change-Id: Iea2f992a59e41e00fec3cdc9d6a13b5f3ab0a437 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56558 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26mb/*: Specify type of `FMDFILE` onceAngel Pons
Specify the type of the `FMDFILE` Kconfig symbol once instead of doing so on each and every mainboard. Change-Id: I810bd3fe8d42102586db6c2c58b7037a60189257 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56557 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26mb/*: Specify type of `OVERRIDE_DEVICETREE` onceAngel Pons
Specify the type of the `OVERRIDE_DEVICETREE` Kconfig symbol once instead of doing so on each and every mainboard. Change-Id: I4cbf4e318a30f0cf75aa8690e7454b9caa115c9d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56556 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26mb/*: Specify type of `DEVICETREE` onceAngel Pons
Specify the type of the `DEVICETREE` Kconfig symbol once instead of doing so on each and every mainboard. Change-Id: If68f11a5ceaa67a3e8218f89e1138c247ebb9a25 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56555 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26mb/*: Specify type of `MAINBOARD_PART_NUMBER` onceAngel Pons
Specify the type of the `MAINBOARD_PART_NUMBER` Kconfig symbol once instead of doing so on each and every mainboard. Change-Id: I3692f9e82fe90af4d0da1d037018a20aa1b45793 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56554 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26mb/*: Specify type of `MAINBOARD_DIR` onceAngel Pons
Specify the type of the `MAINBOARD_DIR` Kconfig symbol once instead of doing so on each and every mainboard. Change-Id: If1cc538b0c4938dac193699897b690e402b3c1e8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56553 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26src/*: Specify type of `CBFS_SIZE` onceAngel Pons
There's no need to specify the type of the `CBFS_SIZE` Kconfig symbol more than once. This is done in `src/Kconfig`, along with its prompt. Change-Id: I9e08e23e24e372e60c32ae8cd7387ddd4b618ddc Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56552 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26mb/intel/galileo: Clean up `FMDFILE` Kconfig handlingAngel Pons
Remove redundant type, prompt and help text, and replace `depends on` clause with conditional default to allow specifying a FMAP when vboot is not selected. Change-Id: I37ddab3a27e304e810ea55f13821d755bb70cb4b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56551 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26mb/intel/coffeelake_rvp: Use CHIPSET_LOCKDOWN_COREBOOTFelix Singer
Currently, internal flashing is not possible due to FSP lockdown. Thus let coreboot do chipset lockdown on all variants. Change-Id: Ib25a0543bfee0889dce071f3b01725daabd0a0eb Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56407 Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26soc/intel/jasperlake: Set xHCI LFPS period sampling off timeBen Kao
Provide an option to set xHCI LFPS period sampling off time (SS_U3_LFPS_PRDC_SAMPLING_OFFTIME_CTRL in JSL EDS revision 2.0). If the option is set in the devicetree, the bits[7:4] in xHCI MMIO BAR + offset 0x80A4 (PMCTRL_REG) will be updated. The host will sample LFPS for U3 wake-up detection when suspended, but it doesn't sample LFPS at all time due to power management, the default xHCI LFPS period sampling off time is 9ms. If the xHCI LFPS period sampling off time is not 0ms, the host may miss the device-initiated U3 wake-up and causes some kind of race condition for U3 wake-up between the host and the device. BUG=b:187801363, b:191426542 TEST=build coreboot with xhci_lfps_sampling_offtime_ms and flash the image to the device. Run following command to check the bits[7:4]: iotools mmio_read32 "XHCI MMIO BAR + 0x80A4" Signed-off-by: Ben Kao <ben.kao@intel.com> Change-Id: I0e13b7f51771dc185a105c5a84a8e377ee4d7d73 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56063 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-07-21mb/intel/ehlcrb: Update FIVR configsLean Sheng Tan
This patch sets the optimized FIVR configs for ehlcrb customized based on the performance measurements to achieve the better power savings in sleep states. - Enable the external V1p05, Vnn, VnnSx rails in S0i3, S3, S4, S5 states. - Update the supported voltage states. - Update max supported current, voltage transition time and RFI spread spectrum. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I1e30ff6d84bfe078fcce0f968fce6aaab7fd575b Reviewed-on: https://review.coreboot.org/c/coreboot/+/55981 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-21mb/intel/adlrvp: Enable I2S audio codecs on ADL-M RVPAnil Kumar
- Add configurability using FW_CONFIG field in CBI, to enable/disable I2S codec support for MAX98373 codecs - AUDIO=ADL_MAX98373_ALC5682I_I2S: enable max98373 codec using expansion board Bug=None Test=With CBI FW_CONFIG set to 0x100, check I2S audio output on expansion card Signed-off-by: Anil Kumar <anil.kumar.k@intel.com> Change-Id: If2649647e58c5f30e2b539d534adf2a4e68f4fda Reviewed-on: https://review.coreboot.org/c/coreboot/+/52221 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-19mb/{google, intel}: Make use of `cpu/intel/cpu_ids.h'Subrata Banik
Remove inclusion of mp_init.h for getting CPUIDs and use dedicated cpu_ids.h file in SoC directory. Change-Id: I411f4f2c237a9e2d39038ee30f2957698ee053bd Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56412 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-07-17mb/intel/adlrvp: Update PMC Descriptor for Alder lake A0(906a0h) siliconSridhar Siricilla
The patch updates PMC Descriptor which is part of Descriptor Region if system equipped with Alder lake A0 silicon. This change allows to use unified Descriptor Region for Alder lake A0(CPU ID:0x906a0) and B0 (CPUD ID:0x906a1) silicons. The change has to be reverted before EOM is enableda on the system. BUG=B:187431859 TEST=Verified PMC Descriptor getting modified for Alder lake B0 silicon if not updated. Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I2a1f60fda7575212bb694fc423bd229452515903 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56073 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2021-07-15mb/intel/adlrvp: Disable xDCI in devicetreeMonika A
Disable tcss_xdci as it is not used. Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Change-Id: I94102240b13d2b96e0295f41bc2b0ba078faf342 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52262 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2021-07-13intel/kblrvp: Move lockdown config to baseboard devicetreeFelix Singer
Clean up lockdown configuration and move it to the baseboard's devicetree. Since most of the mainboards use `CHIPSET_LOCKDOWN_COREBOOT`, use it for the rvp8 variant for consistency as well. Built intel/rvp11 with `BUILD_TIMELESS=1` and coreboot.rom remains identical. intel/rvp8 changes, as expected. Change-Id: I78e847c321c61c3a974b26f30bc2823ff84df651 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56212 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-13mb/intel/kblrvp/variants: Fix indentation and remove empty linesFelix Singer
Change-Id: I4b5e0992494949bcb2fbda1361e0118c087a437a Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56211 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-12mb/intel/adlrvp_m: Enable EC software syncThejaswani Putta
This patch enables CONFIG_VBOOT_EARLY_EC_SYNC. EC software sync will be performed in romstage. BUG=None BRANCH=None TEST=Verify EC software sync works on adlrvp_m Signed-off-by: Thejaswani Putta <thejaswani.putta@intel.com> Change-Id: I3a13094e5da2f672a6789fe86528de44e909045e Reviewed-on: https://review.coreboot.org/c/coreboot/+/56154 Reviewed-by: Selma Bensaid <selma.bensaid@intel.com> Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-08mb/intel/tglrvp: Update Power Limit2 minimum valueSumeet Pawnikar
Update Power Limit2 (PL2) minimum value to the same as maximum value. DTT does not throttle PL2, so this minimum value change here does not impact any existing behavior on the system. BUG=None BRANCH=None TEST=Build and test on tglrvp system Change-Id: I6bbbfa8e43a241df721b91425294983c1d561f2c Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56085 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-07-05mb/intel/adlrvp_m: Remove ASL code and enable dynamic SSDT creation for ↵Varshit B Pandya
camera ACPI This change updates device tree to enable SSDT generation for world facing camera and user facing camera for ADLRVP. Also reverts DSDT changes related to both camera. TEST=Build and Boot aldrvp check i2c enumeration and output of media-ctl Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com> Change-Id: I39f82dc9eb91496d80479ae3f59ca5e03402a599 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55733 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2021-07-05mb/intel/adlrvp: Remove ASL code and enable dynamic SSDT creation for camera ↵Varshit B Pandya
ACPI This change updates device tree to enable SSDT generation for world facing camera and user facing camera for ADLRVP. Also reverts DSDT changes related to both camera. TEST=Build and Boot aldrvp check i2c enumeration and output of media-ctl Compared SSDT with this patch against DSDT without this patch, they are same Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com> Change-Id: I08834bbcf80dc46737de07f69a2402ed6bf93d4f Reviewed-on: https://review.coreboot.org/c/coreboot/+/55526 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2021-07-05mb/intel/adlrvp: Update the FIVR configurationsV Sowmya
This patch sets the optimized FIVR configuration for adlrvp cutomized based on the pnp measurements to achieve the better power savings in sleep states. * Enable the external V1p05, Vnn, VnnSx rails in S0i1, S0i2, S0i3, S3, S4, S5 states. * Update the supported voltage states. * Set the ICC max to 500mA for v1p05 and vnn. Signed-off-by: V Sowmya <v.sowmya@intel.com> Change-Id: I83e6910502d5cf9d4c26fa581272f59ac483ae19 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55703 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2021-06-30soc/intel/elkhartlake: Enable PCH GBELean Sheng Tan
Enable PCH GBE with following changes: 1. Configure PCH GBE related FSP UPD flags 2. Use EHL own GBE ACPI instead of common code version due to different B:D.F from the usual GBE 3. Add kconfig PMC_EPOC to use the PMC XTAL read function Due to EHL GBE comes with time sensitive networking (TSN) capability integrated, EHL FSP is using 'PchTsn' instead of the usual 'PchLan' naming convention across the board. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I6b0108e892064e804693a34e360034ae7dbee68f Reviewed-on: https://review.coreboot.org/c/coreboot/+/55355 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-06-30ec/google: Use EC_HOST_EVENT_NONERob Barnes
google_chromeec_get_event returns 0 for no event. Return EC_HOST_EVENT_NONE=0 to improve readability. BUG=b:184074997 TEST=Build and boot guybrush without error Signed-off-by: Rob Barnes <robbarnes@google.com> Change-Id: Ic08ed9ccdd7c0023d0fe8b641fcf60dca495a242 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55547 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-27 05:13:06 +0000