Age | Commit message (Expand) | Author |
2016-02-09 | mb/intel/d510mo: Explicitly select NIC on PCI in devicetree | Damien Zammit |
2016-02-09 | skylake mainboards: Enable backing up VBNV from CMOS to flash | Duncan Laurie |
2016-02-09 | intel/kunimitisu: set oem_id oem_table_id fields of acpi_header_t | Fang, Yang A |
2016-02-05 | mainboard/intel/galileo: Add board_info.txt | Lee Leahy |
2016-02-04 | mainboard/intel/galileo: Add Intel Galileo Gen 2 Support | Lee Leahy |
2016-02-04 | skylake boards: disable ACPI PM Timer | Archana Patni |
2016-02-04 | intel/kunimitsu: perform early init for CAR *stage | Aaron Durbin |
2016-02-02 | src/: Fix Kcofig symbols missing CONFIG_ prefix | Martin Roth |
2016-01-29 | src/: Chmod 644 all .c, .h, .asl, .inc, .cb, .hex, & Kconfig files | Martin Roth |
2016-01-28 | intel/strago: Update DPTF parameters to higher temperature. | Divagar Mohandass |
2016-01-28 | intel/strago: Fix for Crossystem "wpsw_cur" status | Kumar, Gomathi |
2016-01-28 | intel/strago: Get Boot Flash Write Protect status | Hannah Williams |
2016-01-28 | Braswell: Separate L1 Sub State init procedure for boards. | Kenji Chen |
2016-01-28 | Strago: Enable CA Mirror | Shobhit Srivastava |
2016-01-28 | Strago: Disable SD Card Detect Simulation in FSP | Hannah Williams |
2016-01-28 | intel/strago: Remove support for older rev boards | Hannah Williams |
2016-01-28 | soc/braswell: Configure Boot Flash Write Protect status GPIO | Hannah Williams |
2016-01-28 | intel/strago: Enable native mode on sd card cd line | Jagadish Krishnamoorthy |
2016-01-28 | intel/strago: Disable unused lines on Gpio North Bank | Jagadish Krishnamoorthy |
2016-01-28 | soc/braswell: Fix DSP clock | fdurairx |
2016-01-28 | mb/intel/d510mo: Use SATA AHCI by default | Damien Zammit |
2016-01-28 | mb/intel/d510mo: Use native gfx initialization | Damien Zammit |
2016-01-28 | mb/intel/d510mo: Add CPU, SMI-trap and PIC to DSDT | Damien Zammit |
2016-01-28 | mb/intel/d510mo: Add missing GPIO and GPEN | Damien Zammit |
2016-01-28 | nb/intel/pineview: Native VGA init (CRT) | Damien Zammit |
2016-01-28 | intel/strago: Set LPC_CLKRUNB to PU_20K to solve leakage issue. | Kane Chen |
2016-01-28 | intel/strago: EC_IN_RW gpio input configuration. | Divagar Mohandass |
2016-01-28 | intel/strago: Clean up DDR configuration. | Divagar Mohandass |
2016-01-28 | intel/strago: Disable unused devices. | Divagar Mohandass |
2016-01-27 | intel/strago: Fix GPIO config | Hannah Williams |
2016-01-27 | intel/sklrvp: Remove mainboard | Martin Roth |
2016-01-26 | mainboard/intel/d510mo: Licence fixes and azalia verb table | Damien Zammit |
2016-01-22 | intel/strago: Set POWER_SOURCE_CONFIG in devicetree.cb | Kane Chen |
2016-01-22 | intel/strago: Add method for Wifi regulatory domain | Hannah Williams |
2016-01-22 | skylake mainboards: Enable CONFIG_VBOOT_EC_SLOW_UPDATE | Duncan Laurie |
2016-01-22 | intel/skylake: PL2 override changes | pchandri |
2016-01-21 | chromeos: import Chrome OS fmaps | Patrick Georgi |
2016-01-19 | intel/kunimitsu: Add device properties for Nuvoton codec | Yong Zhi |
2016-01-19 | intel/kunimitsu: Set I2C[4] port voltage to 1.8v | Naresh G Solanki |
2016-01-19 | intel/kunimitsu: Enable FspSkipMpInit token | Rizwan Qureshi |
2016-01-19 | intel/skylake: Enable SaGv feature | haridhar |
2016-01-18 | intel/kunimitsu: Set BOOT_BEEP gpio to a default lo | Rohit Ainapure |
2016-01-18 | skylake boards: csme: add p2sb device and hecienabled devicetree variable | Archana Patni |
2016-01-18 | intel/kunimitsu: Power gate Kepler device | Pravin Angolkar |
2016-01-18 | intel/kunimitsu: Enable TPM PIRQ | Rishavnath Satapathy |
2016-01-18 | intel/kunimitsu: add nhlt support | Naresh G Solanki |
2016-01-16 | mainboard: Drop abuild.disabled files for Skylake boards | Stefan Reinauer |
2016-01-16 | intel/kunimitsu: remove/disable Wake on lan | Rizwan Qureshi |
2016-01-16 | intel/kunimitsu: Add VrConfig UPD parameters | Rizwan Qureshi |
2016-01-15 | intel/kunimitsu: Add new configuration parameters | Rizwan Qureshi |
2016-01-15 | intel/kunimitsu: Enable 20K PU on LPC_LAD 0-3 | pchandri |
2016-01-15 | intel/kunimitsu: Correct the output for crossystem wpsw_boot | Arindam Roy |
2016-01-15 | intel/kunimitsu: Add support for MAX98357A audio amplifier | Rohit Ainapure |
2016-01-15 | intel/kunimitsu: Update the PL1 value as TDP | Sumeet Pawnikar |
2016-01-13 | tree: drop last paragraph of GPL copyright header from new files | Martin Roth |
2016-01-13 | intel/skylake platforms: Add MAINBOARD_HAS_LPC_TPM in Kconfig | Martin Roth |
2016-01-07 | mainboard: Drop abuild.disabled files for Braswell boards | Stefan Reinauer |
2016-01-07 | google/cyan, intel/strago Kconfig: Only ask to display SPD once | Martin Roth |
2016-01-06 | intel/braswell: Build in both C0 and 'other' vbios | Martin Roth |
2015-12-16 | intel/fsp_baytrail: rename include folder baytrail to include/soc | Ben Gardner |
2015-12-10 | cbfs/vboot: remove firmware component support | Aaron Durbin |
2015-12-09 | mohonpeak/Kconfig: Fix whitespace issues | Martin Roth |
2015-12-08 | intel/strago: Remove CONFIG_ from CONFIG_GOP_SUPPORT inside Kconfig | Martin Roth |
2015-12-08 | intel/littleplains: Update with recent changes to mohonpeak | Martin Roth |
2015-12-06 | intel/fsp_rangeley: change non-existent config options to #defines | Martin Roth |
2015-12-06 | Rangeley: Change A, A, A, A INT routing to A, A, A, B | Martin Roth |
2015-12-06 | fsp_baytrail: Change A, A, A, A IRQ routing to A, A, A, B | Martin Roth |
2015-12-06 | intel/eagleheights: Fix IASL warnings | Martin Roth |
2015-12-04 | intel/minnowmax: Fix IRQ connection for legacy uart at 0x3f8 | Michael Tasche |
2015-12-03 | intel/mohonpeak: Change SEABIOS_MALLOC_UPPERMEMORY to config_seabios | Martin Roth |
2015-12-03 | intel/kunimitsu: Coreboot GPIO changes for FAB 4. | Saurabh Satija |
2015-12-03 | intel/kunimitsu: Updated Micron SPD data | Brandon Breitenstein |
2015-12-03 | intel/kunimitsu: FAB 4 update for Rcomp Target table | Brandon Breitenstein |
2015-12-03 | intel/Kunimitsu: FAB 4 SPD changes | Brandon Breitenstein |
2015-12-02 | mainboard/intel/d510mo: Add Intel D510MO mainboard | Damien Zammit |
2015-11-30 | mainboard/intel: Add Little Plains | Marcin Wojciechowski |
2015-11-24 | intel/d945gclf: Fix IASL warning and remark | Martin Roth |
2015-11-23 | IASL: Enable warnings as errors | Martin Roth |
2015-11-20 | google/lars & intel/kunimitsu: Fix Kconfig warnings | Martin Roth |
2015-11-13 | intel/kunimitsu: This patch enables wakeup from S0ix using headset button. | Saurabh Satija |
2015-11-11 | intel/kunimitsu: Enable wake from touch pad. | Archana Patni |
2015-11-11 | intel/skylake: mainboards: Add MAINBOARD_FAMILY kconfig entry | Duncan Laurie |
2015-11-11 | fsp_baytrail: Add macros for legacy GPIO output set up | Werner Zeh |
2015-11-10 | mainboard: Remove empty mainboard.c files | Paul Menzel |
2015-11-10 | mainboard/intel: Add Stargo2 | Marc Jones |
2015-11-05 | intel/i945: Consolidate MADT handling | Vladimir Serbinenko |
2015-11-05 | Kconfig: Remove obsolete Kconfig symbols from google/intel boards | Martin Roth |
2015-11-05 | intel/kunimitsu, google/glados: Enable Fan control support | Sumeet Pawnikar |
2015-11-05 | mainboard: Remove last_boot NVRAM option | Timothy Pearson |
2015-10-31 | tree: drop last paragraph of GPL copyright header | Patrick Georgi |
2015-10-27 | intel/skylake: Clean up USB configuration in devicetree | Duncan Laurie |
2015-10-27 | intel/kunimitsu: Add device properties for Nuvoton code | Yong Zhi |
2015-10-27 | intel/kunimitsu: csme: program sml gpios for csme power gating | Archana Patni |
2015-10-27 | intel/kunimitsu: USB Phy settings and Skip UART2 init in FSP | Rizwan Qureshi |
2015-10-27 | intel/kunimitsu Fab3: Strengthening Rcomp target CTRL value | pchandri |
2015-10-25 | intel/kunimitsu: Add chromeos to verstage | Lee Leahy |
2015-10-23 | southbridge/intel: Move `i82801gx/acpi/platform.asl` to `common/acpi` | Paul Menzel |
2015-10-23 | cpu/intel: Move Power notification ASL code into `common/acpi` | Paul Menzel |
2015-10-23 | intel/cougar_canyon2: fix build | Patrick Georgi |
2015-10-22 | gma ACPI: Make brightness levels a per board setting | Nico Huber |