summaryrefslogtreecommitdiff
path: root/src/mainboard/intel
AgeCommit message (Collapse)Author
2016-01-28intel/strago: Remove support for older rev boardsHannah Williams
Cleaning up code to remove support for early revs of Strago board Change-Id: Ic0647a17d78164fd7dfadc731c9395a8ba08c235 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/13434 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28soc/braswell: Configure Boot Flash Write Protect status GPIOHannah Williams
Set up the GPIO(MF_ISH_GPIO_4) to read WP status. TEST=Use crossystem to read the WP status Signed-off-by: Hannah Williams <hannah.williams@intel.com> Change-Id: I17cbcba013e2a11c2527731df985aa1243065eff Original-Reviewed-on: https://chromium-review.googlesource.com/302424 Original-Tested-by: John Zhao <john.zhao@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Hannah Williams <hannah.williams@intel.com> Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/13185 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28intel/strago: Enable native mode on sd card cd lineJagadish Krishnamoorthy
Configuring Native Mode enables the card present bit in sd card controller register. TEST=Sd Card Plug/Unplug should work in OS and DepthCharge. Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I2f017bdd7125f324fb58a88485cd83110851fbc5 Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Signed-off-by: Hannah Williams <hannah.williams@intel.com> Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/12741 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28intel/strago: Disable unused lines on Gpio North BankJagadish Krishnamoorthy
The unused lines leads to spurious interrupts on few of the systems. TEST=run suspend_stress test and make sure that kbd is working. Change-Id: Ie539e1debc15dd1fd8707f8866c65714fc43e44b Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/313417 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/13176 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28soc/braswell: Fix DSP clockfdurairx
The codec clock frequency was incorrectly set to 25MHz. The only available frequency is 19.2MHz through external clock and PLL. Original-Reviewed-on: https://chromium-review.googlesource.com/295768 Original-Tested-by: Hannah Williams <hannah.williams@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I9bef334a5a3aaee28fcc4937180896ff49969bc5 Signed-off-by: Felix Durairaj <felixx.durairaj@intel.com> Reviewed-on: https://review.coreboot.org/12732 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28mb/intel/d510mo: Use SATA AHCI by defaultDamien Zammit
Change-Id: I6f9772c5bcf9a50dfbc3d1cfaeb79f4454d1fb27 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13454 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2016-01-28mb/intel/d510mo: Use native gfx initializationDamien Zammit
Change-Id: Ic4de7a762e90b379be3814afc61467e1cd099215 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13034 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2016-01-28mb/intel/d510mo: Add CPU, SMI-trap and PIC to DSDTDamien Zammit
Change-Id: I80853cadb4762d9bb34926e31d65d248c5683417 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13453 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2016-01-28mb/intel/d510mo: Add missing GPIO and GPENDamien Zammit
Change-Id: I56c0a55d57d8beabcb33cf1984b037556a71a8b9 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13452 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2016-01-28nb/intel/pineview: Native VGA init (CRT)Damien Zammit
VGA grub console works but display wobbles left/right drm/i915 driver reports one error: - [drm:i915_irq_handler] *ERROR* pipe A underrun - Monitor does not display 1920x1080 after modeset - Other resolutions look out of sync Cause: suspect single bug in raminit (chipset init) Change-Id: I2dcf59f8f30efe98f17a937bf98f5ab7221fc3ac Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/12921 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28intel/strago: Set LPC_CLKRUNB to PU_20K to solve leakage issue.Kane Chen
LPC_CLKRUNB pin needs to be set to PU_20K to prevent leakage TEST=Test on Strago and make sure the leakage is gone Signed-off-by: Kane Chen <kane.chen@intel.com> Change-Id: Id2bf7511806cdc52b505bb469238a9465b356352 Original-Reviewed-on: https://chromium-review.googlesource.com/317020 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Tested-by: Kane Chen <kane.chen@intel.com> Original-Commit-Queue: Kane Chen <kane.chen@intel.com> Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/13175 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28intel/strago: EC_IN_RW gpio input configuration.Divagar Mohandass
Configure EC_IN_RW signal as gpio input. TEST=Boot to Chrome OS in normal mode and enter recovery mode use ctrl-d to switch to Dev mode. Change-Id: I835a1c70d89ef2ab75c35233f889124b60bb64a3 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/304040 Original-Tested-by: Divagar Mohandass <divagar.mohandass@intel.com> Original-Reviewed-by: Gomathi Kumar <gomathi.kumar@intel.com> Original-Reviewed-by: Shobhit Srivastava <shobhit.srivastava@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Shobhit Srivastava <shobhit.srivastava@intel.com> Reviewed-on: https://review.coreboot.org/13124 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28intel/strago: Clean up DDR configuration.Divagar Mohandass
This change includes following changes: - Clean up the DDR configuration and flow. - Removing support for non LPDDR3 boards. - Supporting only LPDDR3 and PMIC config. TEST=Build/flash CB and boot the platform to OS. Change-Id: I8369443da728a4c07e0c1a82040d94034c3542da Signed-off-by: Divagar Mohandass <divagar.mohandass@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/297941 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Jenny Tc <jenny.tc@intel.com> Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/13122 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28intel/strago: Disable unused devices.Divagar Mohandass
This change will disable unused devices in device tree to improve boot performance. TEST=Build/Flash CB and boot to OS. verify Touch screen, Audio, WIFI and Track pad functionality. Change-Id: Ib5ae31c96d75f9a5b0f8d8b72d058e18fe7d7e67 Signed-off-by: Divagar Mohandass <divagar.mohandass@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/300943 Original-Reviewed-by: Hannah Williams <hannah.williams@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Gomathi Kumar <gomathi.kumar@intel.com> Reviewed-on: https://review.coreboot.org/13423 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-27intel/strago: Fix GPIO configHannah Williams
Fix GPIO config for this board: - SD card detect to GPI - SATA GPI to not used - GPIO_SUS1 and GPIO_SUS11 to GPI with pull up (1K and 20K)termination - I2C4 SDA and SCL from not used to Native Change-Id: Iecb23df465a540a71f7268c5aac48617dc74ebf2 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/13431 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-27intel/sklrvp: Remove mainboardMartin Roth
The Intel Skylake RVP3 mainboard is not building, and according to Intel, there is no plan to continue working on it for coreboot. The intel/kunimitsu board is the Skylake reference design for coreboot.org. Change-Id: Icb4e42fdb560cc3188ca29c465674f5e0b11569b Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13469 Tested-by: build bot (Jenkins) Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
2016-01-26mainboard/intel/d510mo: Licence fixes and azalia verb tableDamien Zammit
Azalia verb table replicated from vendor bios. Licence headers added where appropriate. Change-Id: I29e4fe433dee6c5f30fe36055fc9a8bf2062fef5 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/12621 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2016-01-22intel/strago: Set POWER_SOURCE_CONFIG in devicetree.cbKane Chen
SVID config set to SVID_PMIC_CONFIG BUG=none BRANCH=none TEST=build, boot to OS and check the register is set properly Change-Id: If63b8112d4da0347c3a2c4c6d82b12a1f618291c Signed-off-by: Kane Chen <kane.chen@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/308576 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13117 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-22intel/strago: Add method for Wifi regulatory domainHannah Williams
WRDD method in wifi.asl returns the regulatory domain code. This value is read from VPD in wifi_regulatory_domain() and saved to global nvs if CONFIG_HAVE_REGULATORY_DOMAIN is enabled. It returns default code if CONFIG_HAVE_REGULATORY_DOMAIN is not enabled. Original-Reviewed-on: https://chromium-review.googlesource.com/315131 Original-Tested-by: Hannah Williams <hannah.williams@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I52e0a052d31f36c6dc04e6a0953456350e7d86c3 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/12746 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-22skylake mainboards: Enable CONFIG_VBOOT_EC_SLOW_UPDATEDuncan Laurie
Updating EC+PD takes long enough to update that it is good to show the "critical update" screen when doing an EC/PD update. BUG=chrome-os-partner:49650 BRANCH=glados TEST=Build and boot on chell in normal mode with an EC update payload and ensure that it reboots to enable graphics, shows the "critical update" screen, and then reboots to disable graphics init again. Change-Id: I436b96b95595b68273e594bdcfe2db0789ee26b2 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 08e45decd066f8f57ad103ff8b76cb7a916afa9e Original-Change-Id: Ie250f4531437e4a0ce14b5aeb0fe564e9461fe4d Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/322783 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13075 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-22intel/skylake: PL2 override changespchandri
Override the default PL2 values with ones recommended by Intel. BUG=chrome-os-partner:49292 BRANCH=glados TEST=MMIO 0x59A0[14-0] to find PL1 value (0x78) / 8 Watts = 15W MMIO 0x59A0[15] to find PL1 enable/disable = Disable MMIO 0x59A0[46-32] to find PL2 Value (0xC8) / 8 Watts = 25W Here PL2 is set to 25W and PL1 is disabled. CQ-DEPEND=CL:321392 Change-Id: I338b1d4879ae1b5f760e3c1d16e379a2baa1c965 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: fa6a115227385bef44abfacf58af306c16ed478a Original-Change-Id: I3bfc50256c9bdd522c984b11faf2903d7c44c81f Original-Signed-off-by: pchandri <preetham.chandrian@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/322454 Original-Commit-Ready: Venkateswarlu V Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Original-Tested-by: Venkateswarlu V Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Preetham Chandrian <preetham.chandrian@intel.com> Original-Reviewed-by: Venkateswarlu V Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Reviewed-on: https://review.coreboot.org/13071 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-21chromeos: import Chrome OS fmapsPatrick Georgi
These are generated from depthcharge's board/*/fmap.dts using the dts-to-fmd.sh script. One special case is google/veyron's chromeos.fmd, which is used for a larger set of boards - no problem since the converted fmd was the same for all of them. Set aside 128K for the bootblock on non-x86 systems (where the COREBOOT region ends up at the beginning of flash). This becomes necessary because we're working without a real cbfs master header (exists for transition only), which carved out the space for the offset. Change-Id: Ieeb33702d3e58e07e958523533f83da97237ecf1 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/12715 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-19intel/kunimitsu: Add device properties for Nuvoton codecYong Zhi
This patch added default values for two SAR properies introduced by updated nau8825 codec driver. Also updated sar-threshold to improve button detection accuracy. Bug=chrome-os-partner:49394 BRANCH=glados TEST=Build for kunimitsu. Tested with 4-button headset Change-Id: I4096c60be54819d0ab2bf4b72a1e403f88d96af0 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 4b747e9dffed1c51131f0028879d4c22283c8ec5 Original-Change-Id: I3e222ff58c1483e261acf1cea297164966bf8689 Original-Signed-off-by: Yong Zhi <yong.zhi@intel.com> Original-Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/322241 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13014 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-19intel/kunimitsu: Set I2C[4] port voltage to 1.8vNaresh G Solanki
As the audio card needs 1.8V I2C operation. This patch adds entry into devicetree.cb to set I2C port 4 operate at 1.8V. Branch=None Bug=chrome-os-partner:47821 Test=Built & booted kunimitsu board. Verified that I2C port 4 is operating at 1.8V level CQ-DEPEND=CL:*242225, CL:*241206, CL:315167 Change-Id: Ida69b885737aef0cfcf6a6ca21b3650169e614d9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 990df9c1c65e75aae0a1329ead3790e78021b804 Original-Change-Id: Ifbb65e3d83561b52cc18e48b89d146c2f88f289b Original-Signed-off-by: Naresh G Solanki <Naresh.Solanki@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/315168 Original-Commit-Ready: Naresh Solanki <naresh.solanki@intel.com> Original-Tested-by: Robbie Zhang <robbie.zhang@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13010 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-19intel/kunimitsu: Enable FspSkipMpInit tokenRizwan Qureshi
MP init is already handled in coreboot, but it is also part of FSP FSP has a implemented a provision to allow FSP to skip MP init and let coreboot handle it. BRANCH=none BUG=chrome-os-partner:44805 TEST=Build and booted in kunimitsu with SkipMpInit enabled from CB. CQ-DEPEND=CL:310192 Change-Id: Idd9b1424f23765ce227005a322ac72d9e9fc841a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 5c52d0f0cc5d480c87fababc3316009e3ade6e45 Original-Change-Id: I9d92046d0237680b8d562814a9a605a36efb9516 Original-Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/312926 Original-Commit-Ready: Preetham Chandrian <preetham.chandrian@intel.com> Original-Tested-by: Preetham Chandrian <preetham.chandrian@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12992 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-19intel/skylake: Enable SaGv featureharidhar
This change enables SaGv feature for skylake platform.As a result of this patch the skylake platform will train memory at both low & high frequency points.This will be used to dynamically scale the work point (voltage/frequencies). The value "3" here means enable. Following is the table for same. 0=Disabled(SaGv disabled) 1=FixedLow(Fixed to low frequency) 2=FixedHigh(Fixed to High frequency) 3=Enabled(SaGv Enabled.Dynamically changes) BRANCH=None BUG=chrome-os-partner:48534 TEST=Built for kunimitsu. Tested on D1 silicon. Change-Id: I2892d631d64495e6aed453af4fd526f4bf5bed68 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8e09d1a22927f5fcddd6c0be3f9edf3dcb8729be Original-Change-Id: I32a7a53805068a52b381affaf061d69062cd8651 Original-Signed-off-by: haridhar <haridhar.kalvala@intel.com> Original-Signed-off-by: Somayaji, Vishwanath <vishwanath.somayaji@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/315806 Original-Commit-Ready: Haridhar Kalvala <haridhar.kalvala@intel.com> Original-Tested-by: Haridhar Kalvala <haridhar.kalvala@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Haridhar Kalvala <haridhar.kalvala@intel.com> Reviewed-on: https://review.coreboot.org/12997 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-18intel/kunimitsu: Set BOOT_BEEP gpio to a default loRohit Ainapure
The BOOT_BEEP gpio is used to activate the buffer which isolates the I2S signals from PCH while doing a beep from depthcharge. It needs to be lo to deactivate the buffer for audio playback from OS. BUG=chrome-os-partner:47124 BRANCH=None TEST=boot depthcharge & test beep with devbeep. Boot OS and test audio playback. Change-Id: I047513f6cbe9590820dfe3c369161a157864be97 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d0e04d6792a4511630b8111d0f4a64226042f3e6 Original-Change-Id: I0fa8f425ac413798740343823d026c6300c8eef1 Original-Signed-off-by: Rohit Ainapure <rohit.m.ainapure@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/319220 Original-Commit-Ready: Rohit M Ainapure <rohit.m.ainapure@intel.com> Original-Tested-by: Michael Rang <michael.rang@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/12988 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-18skylake boards: csme: add p2sb device and hecienabled devicetree variableArchana Patni
The HeciEnabled decides the state of Heci1 at end of boot. Setting to 0 (default) disables Heci1 and hides the device from OS. It internally uses the FSP Psf Unlock policy to disable the Heci1. It also adds the p2sb device in the devicetree which is necessary for hiding and unhiding the device. BRANCH=none BUG=chrome-os-partner:45618 TEST=build for kunimitsu. CQ-DEPEND=CL:*238451 Change-Id: Ieba2ab3b4ac518cce8371069028170ba99aaf079 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: cbefe9d6e9a981594534d346be67a5cd94483d05 Original-Change-Id: I8c95b5b9b28ba8441ca031f4e9ec523d913990d6 Original-Signed-off-by: Archana Patni <archana.patni@intel.com> Original-Signed-off-by: Subramony Sesha <subramony.sesha@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/311913 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12977 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-18intel/kunimitsu: Power gate Kepler devicePravin Angolkar
This patch power gates the Kepler module on skylake kunimitsu board. This is required to save power since this is consuming over 500mw of power in all active use cases. The device can be powered on later by using the kernel driver as required by setting the kepler enable gpio high. BRANCH=None BUG=chrome-os-partner:45962 TEST=Build and Boot Kunimitsu and check lspci. The Kepler device should not be listed. Also power measurement of board should give approximately 300mW of reduction in power. Change-Id: I244a23385e20ef1431dc895536c8a47e1f5770d7 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8d4fb7d01f32ac307a351c307b8461628c0e5414 Original-Change-Id: Idafa74d7ff14d67a5b1e635f783efd84b5a7399c Original-Signed-off-by: Pravin Angolkar <pravin.k.angolkar@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/302277 Original-Commit-Ready: Naveenkrishna Ch <naveenkrishna.ch@intel.com> Original-Tested-by: Pravin K Angolkar <pravin.k.angolkar@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12964 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-18intel/kunimitsu: Enable TPM PIRQRishavnath Satapathy
Enable the config option for TPM to use PIRQ instead of SERIRQ and enable the MAINBOARD_HAS_LPC_TPM option. BUG=chrome-os-partner:46335 BRANCH=none TEST=tested this patch with TPM ACPI driver(tpm_tis.force=0) Change-Id: I311cc7d2e70cc52a7e90f3c3c60d422b7b998789 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: ad9450c342c752f87e3385a2acd5dd79b65cc75f Original-Change-Id: Ib7b1b40c296fce80d5366bd19e7ff20d7161db95 Original-Signed-off-by: Rishavnath Satapathy <rishavnath.satapathy@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/316287 Original-Commit-Ready: Pravin K Angolkar <pravin.k.angolkar@intel.com> Original-Commit-Ready: Naveenkrishna Ch <naveenkrishna.ch@intel.com> Original-Tested-by: Pravin K Angolkar <pravin.k.angolkar@intel.com> Original-Reviewed-by: Pravin K Angolkar <pravin.k.angolkar@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/12963 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-18intel/kunimitsu: add nhlt supportNaresh G Solanki
Provide an option for including the NHLT blobs within the kunimitsu mainboard directory while also adding the ACPI NHLT table generation that the current hardware supports. Kunimitsu does support two audio codec, ADI and MAXIM, hence use AUDIO_DB_ID to read correct codec and craete NHLT table, this will also help to load only one amplifier ASL for machine driver consumption. BUG=chrome-os-partner:44481 BRANCH=None TEST=Built and booted kunimitsu board. Audio worked with both ADI and MAXIM audio card. CQ-DEPEND=CL:316352 Change-Id: Ic9b9af83a0229fdf5f1cb019245ae65ad9d2f06c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 2db85062d65c5e831da297588aa4abb18d6ed1bb Original-Change-Id: I3b08f3f23b334799a81cde81a30d6f231cc8583f Original-Signed-off-by: Naresh G Solanki <Naresh.Solanki@intel.com> Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/315450 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12959 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-16mainboard: Drop abuild.disabled files for Skylake boardsStefan Reinauer
Make sure the latest & greatest Intel targets actually build in our build system. intel/sklrvp is still failing for reasons unrelated to the rest of the skylake boards. Leaving that disabled for now. Change-Id: Ie784628a57257cea30e5e47074648198b884f6db Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12857 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2016-01-16intel/kunimitsu: remove/disable Wake on lanRizwan Qureshi
remove the WakeConfigWolEnableOverride to disable WOL override configuration in the General PM Configuration B (GEN_PMCON_B) register BRANCH=none BUG=none TEST=Build and booted in kunimitsu Change-Id: Ia523e7956c06c9f4a60e0a2296f771cc3c70bc25 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 12a07eebfb8fa4ee8013fbbb12283a0b429cacfd Original-Change-Id: I2be6c5b0114e4c7d8a7b9ceb59ee32f28f61769f Original-Reviewed-on: https://chromium-review.googlesource.com/316717 Original-Commit-Ready: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Tested-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12958 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-16intel/kunimitsu: Add VrConfig UPD parametersRizwan Qureshi
Cofigure VR settings for kunimitsu BRANCH=none BUG=chrome-os-partner:45387 TEST=Build and booted in kunimitsu CQ-DEPEND=CL:311317 Change-Id: Ib2afe7694d2a807cea1befa73349bd21a3e7d909 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: c3548d7cb3a00826377e819f20d07167b4eb2c65 Original-Change-Id: I6b80f509bc0ab6f65f26eec0651a3b44fb38fbf9 Original-Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/313068 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12945 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-15intel/kunimitsu: Add new configuration parametersRizwan Qureshi
Add new configuration parameters eg. #SLP_S3 assert width BRANCH=none BUG=chrome-os-partner:44075 TEST=Build and booted on kunimitsu, verified that CB is doing the Lockdowns which were previously done by FSP. CQ-DEPEND=CL:310869 Change-Id: I782df49bbf73c121b191f0661907173c4fd29b64 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: de0742869b1b148597d3714a3bc29a0dc08642aa Original-Change-Id: I2b4041cdc22a29e79d2ff7f2cc49f51f80da5567 Original-Reviewed-on: https://chromium-review.googlesource.com/313309 Original-Commit-Ready: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Tested-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12942 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-15intel/kunimitsu: Enable 20K PU on LPC_LAD 0-3pchandri
At S0, S0ix and S3 LPC LAD signals are are floated at 400~500mV. BRANCH=chrome-os-partner:48331 BUG=None TEST=Build and Boot kunimitsu Change-Id: I2e2654ac89f8e0c8d6ab1af31d0bd5a0d4c43db8 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 6f4b902e220dcde73df56970208c45fe3148b70e Original-Change-Id: I597d4816d09d0cfd9b0ec183a9273551aed8688a Original-Signed-off-by: pchandri <preetham.chandrian@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/316529 Original-Commit-Ready: Preetham Chandrian <preetham.chandrian@intel.com> Original-Tested-by: Preetham Chandrian <preetham.chandrian@intel.com> Original-Tested-by: Kyoung Il Kim <kyoung.il.kim@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Preetham Chandrian <preetham.chandrian@intel.com> Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Original-Reviewed-by: Kyoung Il Kim <kyoung.il.kim@intel.com> Reviewed-on: https://review.coreboot.org/12957 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-15intel/kunimitsu: Correct the output for crossystem wpsw_bootArindam Roy
The write protect GPIO is not being configured early enough. This is leading to coreboot reading incorrect value, and writing the incorrect value in vboot shared file. This is leading to "crossystem wpsw_boot" always returning 0 even with the write protect screw in place during boot. BUG=chrome-os-partner:48292 BRANCH=None TEST=Boot with the write protect screw in place. Issue crossystem wpsw_boot. It should show 1. Change-Id: I3a333a4dcce31be9afe28cf11b127090cc7b9421 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 462dd0229c2d3b81cd34bdd2e36bea844f58586c Original-Change-Id: Ib7e0539845575b32322e243e89b81ffee077eb81 Original-Signed-off-by: Arindam Roy <arindam.roy@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/316009 Original-Commit-Ready: Arindam Roy <rarindam@gmail.com> Original-Tested-by: Arindam Roy <rarindam@gmail.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12952 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-15intel/kunimitsu: Add support for MAX98357A audio amplifierRohit Ainapure
Adding support for Maxim 98357A audio amplifier. BUG=chrome-os-partner:44481 BRANCH=None TEST=Build & boot on Skylake kunimitsu Fab4 with MAXIM codec. Verify audio playback works using MAXIM. Change-Id: I4f020ccae540b02d5d533704a52cebb7805715fe Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: c0a81300e02e917500fa3c0241c95dd795abaf04 Original-Change-Id: I8875c9a55f09b1ec353203cfcb2186dc5fd66542 Original-Signed-off-by: Rohit Ainapure <rohit.m.ainapure@intel.com> Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/309894 Original-Tested-by: Rohit M Ainapure <rohit.m.ainapure@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12949 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-15intel/kunimitsu: Update the PL1 value as TDPSumeet Pawnikar
Currently, the Power Limit 1 (PL1) value is 6W which is low for high performance KPIs. This patch updates PL1 value as TDP. SKL-U has 15W TDP. BRANCH=None BUG=None TEST=Built and boot on kunimitsu. Check for the PL1 value over sysfs interface "/sys/class/powercap/intel-rapl:0/constraint_0_power_limit_uw". Load the system with Aquarium 1000 Fish, average FPS should be meeting target 60 with this change. Change-Id: I8e083192e8018edc2cf8b88530df1e05ede10bde Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: eb9aa00a4271875b5471c33883aa7da022f1cb0e Original-Change-Id: I0c61fe1a9f76a9cf9a306240fb66d4c081d2bb5e Original-Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/314416 Original-Commit-Ready: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Original-Tested-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/12934 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-13tree: drop last paragraph of GPL copyright header from new filesMartin Roth
This continues what was done in commit a73b93157f2 (tree: drop last paragraph of GPL copyright header) Change-Id: Ifb8d2d13f7787657445817bdde8dc15df375e173 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12914 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-13intel/skylake platforms: Add MAINBOARD_HAS_LPC_TPM in KconfigMartin Roth
Because these platforms haven't been getting build testing, they've missed out on some of the improvements that the other platforms have gotten. Enable MAINBOARD_HAS_LPC_TPM so that they will build. Change-Id: I5e44135b6dfa800fa14e5b08c3e3e5921d50b082 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12865 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-07mainboard: Drop abuild.disabled files for Braswell boardsStefan Reinauer
Make sure the latest & greatest Intel targets actually build in our build system. Change-Id: I479ad473c260fc914d224cb58f4be1837aff2502 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/12463 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-07google/cyan, intel/strago Kconfig: Only ask to display SPD onceMartin Roth
Change-Id: Ic3df9bf7d7f3c4c39789f3f496bcb7fc2ee50931 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12827 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-01-06intel/braswell: Build in both C0 and 'other' vbiosMartin Roth
The Braswell CPU seems to have two different Video BIOS roms, one for the C0 revision, and one for other revisions. Build them both into the coreboot image, and let coreboot sort out which one should be used at runtime. This should allow one rom to be used for all revisions. The initial reason for this patch was that the Kconfig symbol C0_DISP_SUPPORT didn't exist, and was causing issues. This seems like the best way to eliminate the need for that symbol. Change-Id: I5b9f225c0daf4e02fda75daf9cd07bb160bf0e0f Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12826 Tested-by: build bot (Jenkins) Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-12-16intel/fsp_baytrail: rename include folder baytrail to include/socBen Gardner
This is to match the layout of the non-fsp baytrail to make comparisons easier and possibly remove duplicate files. Change-Id: I9a94842d724ab3826de711d398227e7bdc1045ff Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/12686 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-12-10cbfs/vboot: remove firmware component supportAaron Durbin
The Chrome OS verified boot path supported multiple CBFS instances in the boot media as well as stand-alone assets sitting in each vboot RW slot. Remove the support for the stand-alone assets and always use CBFS accesses as the way to retrieve data. This is implemented by adding a cbfs_locator object which is queried for locating the current CBFS. Additionally, it is also signalled prior to when a program is about to be loaded by coreboot for the subsequent stage/payload. This provides the same opportunity as previous for vboot to hook in and perform its logic. BUG=chromium:445938 BRANCH=None TEST=Built and ran on glados. CQ-DEPEND=CL:307121,CL:31691,CL:31690 Change-Id: I6a3a15feb6edd355d6ec252c36b6f7885b383099 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12689 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-09mohonpeak/Kconfig: Fix whitespace issuesMartin Roth
Auto-indent did me wrong, and I didn't notice it. Change-Id: I5a736cf53a3bdbe57b28b2d6a55befd341d8dfd8 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12655 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2015-12-08intel/strago: Remove CONFIG_ from CONFIG_GOP_SUPPORT inside KconfigMartin Roth
The CONFIG_ is only used for Kconfig symbols outside of Kconfig. If used inside Kconfig, you'd end up with CONFIG_CONFIG_GOP_SUPPORT when it was used in the C code. Change-Id: I572323ef08fdd937d33ded1c27a418b3ad856147 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12664 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-12-08intel/littleplains: Update with recent changes to mohonpeakMartin Roth
- Change SEABIOS_MALLOC_UPPERMEMORY to using PAYLOAD_CONFIGFILE. - Add saved seabios .config with CONFIG_MALLOC_UPPERMEMORY unset. - Remove fixed microcode location. Change-Id: I8b723edf6d6b5542f118e9e0e1aee8104d9cde86 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12635 Tested-by: build bot (Jenkins) Reviewed-by: David Guckian <david.guckian@intel.com>
2015-12-06intel/fsp_rangeley: change non-existent config options to #definesMartin Roth
Kconfig symbols CONFIG_ACPI_INCLUDE_PMIO and CONFIG_ACPI_INCLUDE_GPIO were never added to the coreboot codebase when the Rangeley code was brought in from Sage. These symbols disabled ACPI code that was unused because it caused dmesg warnings due to conflicts with drivers trying to claim the same addresses as the ACPI code. Because it could be used on some other platforms, it was left in instead of being completely removed. - Change the Kconfig symbol names to simple #defines in the mainboard code. - Add the #defines along with comments to the reference platform. - Hook everything together in dsdt.asl - Update new mainboard littleplains the same way. Change-Id: I1f62157c6e447ea9b7207699572930e4711fc3e0 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12552 Reviewed-by: David Guckian <david.guckian@intel.com> Tested-by: build bot (Jenkins)
2015-12-06Rangeley: Change A, A, A, A INT routing to A, A, A, BMartin Roth
Devices that have their interrupt routing set to A, A, A, A don't get any interrupt values assigned because that series evaluates to 0. The code that sets the interrupt values checks to make sure a value is set by verifying that it's not 0. On Bay Trail, these are all single-function graphics devices, so by changing one of the unused interrupt lines from A to any other value, it assigns the values correctly. This issue did not affect ACPI interrupt routing. This is just a workaround, and the root issue still needs to be fixed. Change-Id: I4e6fe56084cbe86b309da15d61b296f1936458ec Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12630 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-06fsp_baytrail: Change A, A, A, A IRQ routing to A, A, A, BMartin Roth
Devices that have their interrupt routing set to A, A, A, A don't get any interrupt values assigned because that series evaluates to 0. The code that sets the interrupt values checks to make sure a value is set by verifying that it's not 0. On Bay Trail, these are all single-function graphics devices, so by changing one of the unused interrupt lines from A to any other value, it assigns the values correctly. This issue did not affect ACPI interrupt routing. This is just a workaround, and the root issue still needs to be fixed. Change-Id: I78866e3e0079435037e457a4fb04979254b56ee2 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12629 Tested-by: build bot (Jenkins) Reviewed-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-06intel/eagleheights: Fix IASL warningsMartin Roth
The eagleheights platform had 3 warnings: The SIO device needs an _ADR object to specify the address in addition to the operating region. Not all the paths through the _OSC method returned a value. According to the ACPI spec (5.0 & 6.0), bit 2 needs to be set for an unrecognized GUID. dsdt.aml 341: Device(SIO) { Warning 3141 - ^ Missing dependency (Device object requires a _HID or _ADR in same scope) dsdt.aml 140: Method (_OSC, 4) Warning 3115 - ^ Not all control paths return a value (_OSC) dsdt.aml 140: Method (_OSC, 4) Warning 3107 - ^ Reserved method must return a value (Buffer required for _OSC) - Remove Kconfig default disabling IASL warnings as errors. Change-Id: Iab52f19b96468e142b06430d99ba1d9f367d126e Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12522 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-04intel/minnowmax: Fix IRQ connection for legacy uart at 0x3f8Michael Tasche
The E38xx legacy uart fires IRQ4, not IRQ3. PCI based IRQ A is switched from IRQ4 to IRQ3, to get a working IRQ for the legacy uart. Change-Id: Ibc8e824c92bf1b9a92594ddc5d8a06726c9f1744 Signed-off-by: Michael Tasche <michael.tasche@esd.eu> Reviewed-on: https://review.coreboot.org/12622 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2015-12-03intel/mohonpeak: Change SEABIOS_MALLOC_UPPERMEMORY to config_seabiosMartin Roth
Instead of the SEABIOS_MALLOC_UPPERMEMORY option, use a saved SeaBIOS .config file to do the same thing. Change-Id: I29110a382b7770329ef938876426e571fbbbb339 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12569 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2015-12-03intel/kunimitsu: Coreboot GPIO changes for FAB 4.Saurabh Satija
This patch adds GPIO mappings for PCH_BUZZER, AUDIO_DB_ID, AUDIO_IRQ and BOOT_BEEP. BUG=chrome-os-partner:47513 BRANCH=none TEST=Built for kunimitsu but not verified on Fab 4. Change-Id: I0172df3aa2a5c4bfc24422aa0bfb7e5f677d37c9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: ba66bef6d402a1040f0f13bc828de400bc6371b7 Original-Change-Id: I1f2ed8fc283883a523a77e07de14ed90057b719b Original-Signed-off-by: Saurabh Satija <saurabh.satija@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/311806 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/12600 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-03intel/kunimitsu: Updated Micron SPD dataBrandon Breitenstein
Updated Micron SPD data to correct values BUG=none BRANCH=none TEST=Tested on FAB 4 with Micron Dimm CQ-DEPEND=CL:312546 Change-Id: Iffe2917f083e4de7944c7f249cbf55bd199f6282 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 00234d81df38139312145c89cbf38d8ac3af5735 Original-Change-Id: Ifcc85cd1aae61e02b820cb25733dfb0680410107 Original-Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/313003 Original-Commit-Ready: Freddy Paul <freddy.paul@intel.com> Original-Tested-by: Freddy Paul <freddy.paul@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12592 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-03intel/kunimitsu: FAB 4 update for Rcomp Target tableBrandon Breitenstein
Changed index 3 to be an exception of the default Rcomp Value BUG=None BRANCH=None TEST=Tested on FAB 4 SKU 1 Change-Id: I154c254835c4f6995183840cc241feeb9a448cdb Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f08eba3cf623b5869a7bb03fb3b6ba084cdd1622 Original-Change-Id: I0fbcff2c3526c4ed7cf90088ca23b43774cb9f8f Original-Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/312715 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Freddy Paul <freddy.paul@intel.com> Reviewed-on: https://review.coreboot.org/12591 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-03intel/Kunimitsu: FAB 4 SPD changesBrandon Breitenstein
Updated Memory IDs and SKU IDs for FAB 4 Updated detection of single/dual channel memory to use SPD Index (Memory ID) Added spd files for new dimms Removed boardid.h as it is no longer needed BUG=None BRANCH=None TEST=Tested on FAB4 SKU1 and SKU3 Change-Id: I60403c0e636ea28797d94cff9431af921631323e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: ce39dc3b0b9448635f878ce8c1aea5b4743594c4 Original-Change-Id: I870b3dfa2c4f358defb9263e759de477bb32e620 Original-Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/312546 Original-Commit-Ready: Freddy Paul <freddy.paul@intel.com> Original-Tested-by: Freddy Paul <freddy.paul@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/12590 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-02mainboard/intel/d510mo: Add Intel D510MO mainboardDamien Zammit
Board uses Pineview native raminit Board boots from grub to linux kernel VGA needs work, currently headless machine Change-Id: I8e459c6d40e0711fac8fb8cfbf31d9cb2aaab3aa Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/10074 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-30mainboard/intel: Add Little PlainsMarcin Wojciechowski
This adds a new mainboard: Little Plains for Intel's atom c2000 It was based on Mohon Peak board with some minor changes This board is not available as standalone product It is a managment board for Intel Ethernet Multi-host Controller FM10000 Series The FSP package is available from Intel: https://www.intel.com/fsp Change-Id: I28127a858106ed35d26e235f0c6393c20ed14350 Signed-off-by: Marcin Wojciechowski <marcin.wojciechowski@intel.com> Reviewed-on: https://review.coreboot.org/12503 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-11-24intel/d945gclf: Fix IASL warning and remarkMartin Roth
- Add an empty Operating Region for the empty _REG method - Serialize _CRS Method - Remove Kconfig default disabling IASL warnings as errors dsdt.aml 1445: Method (_CRS, 0) Remark 2120 - ^ Control Method should be made Serialized (due to creation of named objects within) dsdt.aml 1454: Method (_REG, 2) Warning 3079 - ^ _REG has no corresponding Operation Region Change-Id: I2b64609c929af62c2b699762206e5baf58fbdb8b Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/12523 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-23IASL: Enable warnings as errorsMartin Roth
We've actually got more warnings now than when I first tested IASL warnings as errors. Because of this, I'm adding it with the option to have it disabled, in hopes that things won't get any worse as we work on fixing the IASL warnings that are currently in the codebase. - Enable IASL warnings as errors - Disable warnings as errors in mainboards that currently have warnings. - Print a really obnoxious message on those platforms when they build. ***** WARNING: IASL warnings as errors is disabled! ***** ***** Please fix the ASL for this platform. ***** Change-Id: If0da0ac709bd8c0e8e2dbd3a498fe6ecb5500a81 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10663 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-20google/lars & intel/kunimitsu: Fix Kconfig warningsMartin Roth
EC_SOFTWARE_SYNC depends on CHROMEOS, so move it into the CHROMEOS section. This fixes the kconfig warning: warning: (CHROMEOS && BOARD_SPECIFIC_OPTIONS ...) selects EC_SOFTWARE_SYNC which has unmet direct dependencies (MAINBOARD_HAS_CHROMEOS && CHROMEOS && VBOOT_VERIFY_FIRMWARE) Change-Id: I459f48fd18c7568c4584df7d4aefa69dec3e4907 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/12460 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-13intel/kunimitsu: This patch enables wakeup from S0ix using headset button.Saurabh Satija
Kernel needs to set Audio IRQ as wake capable. BUG=chrome-os-partner:47450 BRANCH=NONE TEST=System wakes up from S0ix by pressing headset buttons. Change-Id: I0f89d05b4c5449e5e3277dde938d941e4ad8cbea Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 65bf434f7c7e1662211f9c8bf61eeb4f41bdc675 Original-Change-Id: I7b5b564023044b4458eb0976488018b3226f4c70 Original-Signed-off-by: Saurabh Satija <saurabh.satija@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/311793 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/12414 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-11intel/kunimitsu: Enable wake from touch pad.Archana Patni
This patch enables GPP_B5 as ACPI_SCI for wake. It also defines touchpad wake device in ACPI with GPE0_DW0_05 for _PRW. BUG=chrome-os-partner:43491 BRANCH=none TEST=Build for kunimitsu. Tested wake from touchpad on a reworked kunimitsu board. Change-Id: I4347be8f7a4552c6b583f0797fab64045aa9792e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8c21f3b5df21d96937975dc20ee5e2f83fb3d75e Original-Change-Id: I76e69bdba81ec22ae67c7cff3a807cea8c54a5b3 Original-Signed-off-by: Archana Patni <archana.patni@intel.com> Original-Signed-off-by: Subramony Sesha <subramony.sesha@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/311007 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/12395 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-11intel/skylake: mainboards: Add MAINBOARD_FAMILY kconfig entryDuncan Laurie
The family variable was not being set yet for skylake, add this to the current boards. BUG=chromium:551715 BRANCH=none TEST=emerge-glados coreboot Change-Id: Icf175e4ce89cb47b9eabce1399eb3ef29e7a607f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 7e379402f38634eb0204e03b616111fff9515cec Original-Change-Id: Ia31fb04b5c22defc71a0c02d9fa1eff93ccbc49d Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/311213 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/12390 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-11fsp_baytrail: Add macros for legacy GPIO output set upWerner Zeh
Up to now the GPIO set up macros for input sets up GPIOs to be mapped to memory space while macros for outputs sets up GPIOs to be mapped to legacy io space. This patch adds two additional macros for legacy output definition and changes the old macros to memory space mapping. In addition, the intel/minnowmax mainboard is modified to use the legacy macros for outputs to ensure this mainboard stays unchanged in terms of functionality. TEST=Booted siemens/mc_tcu3 and ensured GPIO set up in linux. Change-Id: I99e98d31e1a59e63c58d536f2c493d6dcbfd1e75 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: http://review.coreboot.org/12340 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-11-10mainboard: Remove empty mainboard.c filesPaul Menzel
All the deleted mainboard files contain no code besides some print statements denoting, that the init is executed. If such statements are desired, this should be done in common code so it does not have to be added to each mainboard. Therefore, also delete files with just print statements. Change-Id: I379e4b1e1b1725648c6231bc6954ac3cc655a596 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/12355 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-11-10mainboard/intel: Add Stargo2Marc Jones
The Intel Stargo2 is a communications device reference design. This mainboard uses the Sandy/Ivy Bridge and is paired with the i89xx southbridge. The FSP package is available from Intel: https://intel.com/fsp. Change-Id: I75c527f0eb0de1ee6ac13d8d276d7cf23b5b120c Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/12170 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-05intel/i945: Consolidate MADT handlingVladimir Serbinenko
Change-Id: Ic3cdfa6086a45aa231aa817d5ef6998823589818 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7108 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-05Kconfig: Remove obsolete Kconfig symbols from google/intel boardsMartin Roth
- CACHE_ROM is no longer used in the coreboot code. It was removed in commit 4337020b (Remove CACHE_ROM.) - CAR_MIGRATION is also no longer used in coreboot code - it was removed in commit cbf5bdfe (CBMEM: Always select CAR_MIGRATION) - MARK_GRAPHICS_MEM_WRCOMB was removed in commit 30fe6120 (MTRR: Mark all prefetchable resources as WRCOMB) Change-Id: I8b33a08c256f6b022e57e9af60d0629d9a3ffac8 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/12327 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2015-11-05intel/kunimitsu, google/glados: Enable Fan control supportSumeet Pawnikar
This patch enables the Fan thermal participant device in the device tree for thermal active cooling action for DPTF on SKL-U fan based kunimitsu board. This patch defines the _ART table in dptf ASL file. With active cooling policy (_ART), we can control the fan on/off and speed. BRANCH=None BUG=chrome-os-partner:46493 TEST=Built for kunimitsu board. Tested to see that the thermal devices and the participants are enumerated and can be seen in the /sys/bus/platform/devices. Also, checked the FAN type the cooling devices enumerated in the /sys/class/thermal with sysfs interface. Change-Id: I40c540dad32beefe249f025b570c347d3ad08c36 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 82ae11643ca23e65780006f3890f1d173363b8af Original-Change-Id: If44b358052a677d13c74919f09a3eb89611fccad Original-Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/307028 Original-Commit-Ready: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Original-Tested-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Original-Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/12323 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-05mainboard: Remove last_boot NVRAM optionTimothy Pearson
The last_boot NVRAM option was deprecated and removed in commit 3bfd7cc6. Remove the last_boot option from all affected mainboards to eliminate user confusion. Change-Id: I7e201b9cf21dfe5dda156785bad078524098626d Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12316 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins)
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-27intel/skylake: Clean up USB configuration in devicetreeDuncan Laurie
Instead of having many different arrays for USB configuration, with each array containing one bit of information, have one array containing all the information for each port. This way we can put the basic tuning parameters into a structure and then define structures for the basic supported configurations. The existing port definitions are taken from the Skylake HSIO tuning guide. BUG=chrome-os-partner:40635 BRANCH=none TEST=build and boot on glados, verify USB functionality in all ports. Change-Id: I5873dee011ae9e250b6654c73a7bd5c17681095b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 864040412b2d2923d3acbfca8055724887c58506 Original-Change-Id: Id518b1086abbe4a8c25d77fd4efc2d0de856bd5f Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/306734 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/12163 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-10-27intel/kunimitsu: Add device properties for Nuvoton codeYong Zhi
Add default properties for NAU8825 codec Change jack detecion irq to level to match the codec driver BUG=chrome-os-partner:44481 BRANCH=None TEST=Build and Boot Kunimitsu board with this patch Verify Audio jack detection IRQ working Change-Id: Iaab7a7bfbab30fa0914e56477f7c6a93717b4518 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 58c45538ea6a85724f9ab1837e5cf0971611a1f8 Original-Change-Id: I11466b8fd64b768e1e826639ba37bd6e00810370 Original-Signed-off-by: Yong Zhi <yong.zhi@intel.com> Original-Signed-off-by: Fang, Yang A <yang.a.fang@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/303760 Original-Commit-Ready: Yang Fang <yang.a.fang@intel.com> Original-Tested-by: Yang Fang <yang.a.fang@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/12162 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-10-27intel/kunimitsu: csme: program sml gpios for csme power gatingArchana Patni
For SMT controllers to power gate, all SMT/SMS clock, data and alert signals should be inactive. The SML0 blocks are not used for any functional purposes and are not configured in the GPIO tables. SMT hardware will not allow the blocks to be power gated in this scenario. The SML* pins are now configured as GPIOs - input and deep. With this change, the SMT blocks are properly power gating. BRANCH=none BUG=chrome-os-partner:45618 TEST=build for Kunimitsu, boot on FAB3. Change-Id: I16b31a8d5c3c9df0f37df15c751c5a0978ac0feb Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d2913a75969008583f454a4bfc9da2156266548b Original-Change-Id: I00dca84a3f6ba7bda4ca1c206b49ff81482279a5 Original-Signed-off-by: Archana Patni <archana.patni@intel.com> Original-Signed-off-by: Subramony Sesha <subramony.sesha@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/306391 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/12161 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-10-27intel/kunimitsu: USB Phy settings and Skip UART2 init in FSPRizwan Qureshi
FSP 1.7.0 provides UPD to configure USB phy settings update the same for kunimitsu. FSP 1.7.0 also provides UPD to indicate FSP not to reinitialise UART2 controller during MemoryInit. BRANCH=none BUG=chrome-os-partner:45684,chrome-os-partner:41374,chrome-os-partner:42284 TEST=build for Kunimitsu, boot on FAB3, Also checked for Boot from USB, Boot from eMMC, USB Audio, Onboard Audio, Touch, Wifi, S3 entry/resume CQ-DEPEND=CL:303661 Change-Id: Ie0a545c954f472cc822b63786d40399ec93d5166 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 90296e04942c70d972c225fc75dfab6de44d10ed Original-Change-Id: If79e81ef3323e782e96db307d89a01c14174b435 Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Signed-off-by: Rishavnath Satapathy <rishavnath.satapathy@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/304032 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/12145 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-27intel/kunimitsu Fab3: Strengthening Rcomp target CTRL valuepchandri
This patch strengthens the Rcomp Target CTRL by 10% for 8GB memory part K4E6E304EE-EGCF as with the current values the MRC training is failing due to more load on CS# BRANCH=None BUG=chrome-os-partner:44647 TEST=BUilds and boots on Kunimitsu. Change-Id: I478002bbebabaac418356d4b5b4755bb56009268 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: b208659e690d8cb5b8dcaf30eed53c01b9f77f6d Original-Change-Id: Ia0a0c1358649af77a3a0d301cb791f26f1e039bf Original-Signed-off-by: pchandri <preetham.chandrian@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/304103 Original-Commit-Ready: Preetham Chandrian <preetham.chandrian@intel.com> Original-Tested-by: Preetham Chandrian <preetham.chandrian@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Preetham Chandrian <preetham.chandrian@intel.com> Reviewed-on: http://review.coreboot.org/12143 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-25intel/kunimitsu: Add chromeos to verstageLee Leahy
In order to build stand alone verstage the chromeos.c file needs to be part of the verstage target. BRANCH=none BUG=chrome-os-partner:44827 TEST=Build and run on kunimitsu Change-Id: I9c547ae177dc95030c8c545a302a2349bf1c9cf8 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 07b6465f0b3e18d30647959b8e1db44d8647cf90 Original-Change-Id: I49bf7f1bd2edb32ffe9cc22f6fce1348434fd234 Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/301243 Original-Commit-Ready: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Tested-by: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/12152 Tested-by: build bot (Jenkins) Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
2015-10-23southbridge/intel: Move `i82801gx/acpi/platform.asl` to `common/acpi`Paul Menzel
Commit 24813c14 (i945: Consolidate acpi/platform.asl) creates the file in the directory `src/southbridge/intel/i82801gx/acpi`. Devices with the southbridge `intel/i82801ix`, like the laptop Lenovo X200, use the exact same ASL code though. So share this in the directory `src/southbridge/intel/common/acpi`. Change-Id: I33b7993bcdbef7233ed85a683b2858ac72c1d642 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/11881 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-23cpu/intel: Move Power notification ASL code into `common/acpi`Paul Menzel
Commit 24813c14 (i945: Consolidate acpi/platform.asl) creates the file in the directory `src/cpu/intel/model_6dx/acpi`, although the devices can also use different Intel CPU models like, for example, `intel/model_6ex` on the Lenovo T60. Therefore move the file to the directory `src/cpu/intel/common/acpi` so that other devices, like Intel GM45 based devices, can also include it. Change-Id: I90126b66a4d70468923622a8e3aebadeafcbf96f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/11880 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-23intel/cougar_canyon2: fix buildPatrick Georgi
The reintroduction of cougar_canyon2 crossed beams with the moving the GMA display brightness data in ACPI into individual mainboards. Make things build again by having the board use the same default values that it used to use automatically. They may be wrong, but no worse than what was there before. Change-Id: Id788034c38b42e1c35d9cd17e9bbb2ce49e3e91c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/12132 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2015-10-22gma ACPI: Make brightness levels a per board settingNico Huber
Those are actually board specific. Keep the old value as defaults, though. The defaults are included by all affected boards. Change-Id: Ib865c7b4274f2ea3181a89fc52701b740f9bab7d Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/11705 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-10-22Revert "Remove sandybridge and ivybridge FSP code path"Martin Roth
Please don't remove chipsets and mainboards without discussion and input from the owners. Someone was asking about cougar canyon 2 just a couple of weeks ago - there's obviously still interest. This reverts commit fb50124d22014742b6990a95df87a7a828e891b6. Change-Id: Icd7dcea21fa4a7808b25bb8727020701aeebffc9 Signed-off-by: Martin Roth <martinroth@google.com> Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/12128 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-14Revert "Remove FSP Rangeley SOC and mohonpeak board support"Martin Roth
This chip is still being used and should not have been deleted. It's a current intel chip, and doesn't even require an ME binary. This reverts commit 959478a763c16688d43752adbae2c76e7764da45. Change-Id: I78594871f87af6e882a245077b59727e15f8021a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11860 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-11intel fsp1_1: prepare for romstage vboot verification splitAaron Durbin
In order to introduce a verstage which performs vboot verification the cache-as-ram environment needs to be generalized and split into pieces that can be utilized in romstage and/or verstage. Therefore, the romstage pieces were removed from the cache-as-ram specific pieces that are generic: - Add fsp/car.h to house the declarations for functions in the cache-as-ram environment - Only have cache_as_ram_params which are isolated form the cache-as-ram environment aside from FSP_INFO_HEADER. - Hardware requirements for console initialization is done in the cache-as-ram specific files. - Provide after_raminit.S which can be included from a romstage separated from cache-as-ram as well as one that is tightly coupled to the cache-as-ram environment. - Update the fallout from the API changes in soc/intel/{braswell,common,skylake}. BUG=chrome-os-partner:44827 BRANCH=None TEST=Built and booted glados. Original-Change-Id: I2fb93dfebd7d9213365a8b0e811854fde80c973a Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/302481 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: Id93089b7c699dd6d83fed8831a7e275410f05afe Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11816 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-11intel SOC common: Remove unused parametersLee Leahy
Eliminate unused parameters from the console initialization. BRANCH=none BUG=chrome-os-partner:44827 TEST=Build and run on kunimitsu Original-Change-Id: Iacacea292d43615e9d2f8e5d3ec67e77f3f08906 Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/301204 Original-Commit-Ready: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Change-Id: I3a0ea948ce106b07cb6aa872375ce588317dc437 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11814 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-06fsp/cache_as_ram.inc and boards: Fix incorrect usage of POST_IOAlexandru Gagniuc
POST_IO is a user-visible config bool. fsp_1_0/cache_as_ram.inc made a mess of it, by forcing a build-time error when CONFIG_POST_IO was not being set. fsp 1.0 boards ended 'select'ing this in their Kconfig. Refactor fsp/cache_as_ram.inc handling of POST codes, and remove the "select POST_IO" from boards that have it. Instead of implementing an ad-hoc changing post code display and a delay based on port 0xed, just encode the FSP failure code in the POST code. Since FSP failure codes are > 16, we can encode the failure code in the lower nibble, and theirfailing function in the upper nibble. Change-Id: Iaa3e6533e8406b16ec0689abd704984d79293952 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/8485 Tested-by: build bot (Jenkins) Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2015-10-03Remove FSP Rangeley SOC and mohonpeak board supportAlexandru Gagniuc
mohonpeak is the reference board for Rangeley. I doubt anyone uses it or cares about it. We jokingly refer to it as "Moron Peak". It's code with no known users, so we shouldn't be hauling it around for the eventuality that someone might use it in the future. Change-Id: Id3c9fc39e1b98707d96a95f2a914de6bbb31c615 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/11790 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
2015-10-03Remove sandybridge and ivybridge FSP code pathAlexandru Gagniuc
We already have two other code paths for this silicon. Maintaining the FSP path as well doesn't make much sense. There was only one board to use this code, and it's a reference board that I doubt anyone still owns or uses. Change-Id: I4fcfa6c56448416624fd26418df19b354eb72f39 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/11789 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
2015-10-03sandybridge ivybridge: Treat native init as first class citizenAlexandru Gagniuc
This is a sad story. We have three different code paths for sandybridge and ivybridge: proper native path, google MRC path, and, everyone's favorite: Intel FSP path. For the purpose of this patch, the FSP path lives in its own little world, and doesn't concern us. Since MRC was first, when native files and variables were added, they were suffixed with "_native" to separate them from the existing code. This can cause confusion, as the suffix might make the native files seem parasitical. This has been bothering me for many months. MRC should be the parasitical path, especially since we fully support native init, and it works more reliably, on a wider range of hardware. There have been a few board ports that never made it to coreboot.org because MRC would hang. gigabyte/ga-b75m-d3h is a prime example: it did not work with MRC, so the effort was abandoned at first. Once the native path became available, the effort was restarted and the board is now supported. In honor of the hackers and pioneers who made the native code possible, rename things so that their effort is the first class citizen. Change-Id: Ic86cee5e00bf7f598716d3d15d1ea81ca673932f Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/11788 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
2015-09-28kunimitsu: Fix typo for WLAN ACPI device nameDuncan Laurie
Fix the typo of _DDR to be _DDN. BUG=chrome-os-partner:40635 BRANCH=none TEST=build kunimitsu with iasl-20150717 Change-Id: I1e7c20d450ea897bfd24506d10a5f466b03610e4 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f136581b653bfb63aac24065c8837307e3fc5432 Original-Change-Id: I3358e6d3d05bcfc291199e8ef12ff92c66f5b74f Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/302165 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11718 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2015-09-24coreboot: move TS_END_ROMSTAGE to one spotAaron Durbin
While the romstage code flow is not consistent across all mainboards/chipsets there is only one way of running ramstage from romstage -- run_ramstage(). Move the timestamp_add_now(TS_END_ROMSTAGE) to be within run_ramstage(). BUG=chrome-os-partner:44827 BRANCH=None TEST=Built and booted glados. TS_END_ROMSTAGE still present in timestamp table. Change-Id: I4b584e274ce2107e83ca6425491fdc71a138e82c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11700 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-17glados/kunimitsu: remove the implementation of mainboard_add_dimm_inforobbie zhang
This is a follow-up patch to https://chromium-review.googlesource.com/#/c/286877, after fsp support is landed in v1.5. BUG=chrome-os-partner:42975 BRANCH=none TEST=execute "mosys memory spd print all" on glados and kunimitsu Change-Id: I949e287372b190affac36a0efde8a30402eecdc8 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 71a2e1838ff8bbaa358c167dad905b63d23c43fa Original-Change-Id: I64103af4f8456a053a955845a067062122f47af3 Original-Signed-off-by: Robbie Zhang <robbie.zhang@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/298967 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/11657 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-17kunimitsu: Enable wake-on-wifiDuncan Laurie
- Assign GPE DW0 to GPP_B block - Enable GPP_B16 as ACPI_SCI for wake - Define PCIe WLAN device in ACPI with GPE0_DW0_16 for _PRW Note that current designs cannot wake from Deep S3 via wifi. BUG=chrome-os-partner:40635 BRANCH=none TEST=emerge-kunimitsu coreboot Change-Id: I1fe15a5a9b3d868a0e4f1bfb102b69f024c3aa48 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: de9dfee840246866a8dcca2e1c42c0292e820529 Original-Change-Id: I926d74b6bcf6d64c3db61ed23d7c17b51a98b052 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/298232 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11651 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-17kunimitsu: Remove code to set USB charge behavior on sleepDuncan Laurie
The EC doesn't support these commands so sending them is not working. We have had a default policy of wake on USB for a long time now and this runtime config isn't really needed any longer. BUG=chrome-os-partner:40635 BRANCH=none TEST=emerge-kunimitsu coreboot Change-Id: I547d92b4e852664567792060bf1f7b60976bb9a6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 4a929eb9ec422e145006505ea4d5fbd1ef3950be Original-Change-Id: I01e80de65e6e1cdcabb24edb43bc671f5a8aa437 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/298234 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11653 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-16kunimitsu: Enable ALS connected to ECDuncan Laurie
Kunimitsu has an ambient light sensor connected to the EC which is presented to the OS as a standard ACPI0008 device. BUG=chrome-os-partner:43493 BRANCH=none TEST=emerge-kunimitsu coreboot Change-Id: I7998c19e5514eda781cc20888cdb0732f81389ae Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a67e5ddfccea0776841fabe04be55c1854bf31f2 Original-Change-Id: I381dc9c5777370df2ea4c41c9e153b3277082718 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/298252 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11645 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-16kunimitsu: Disable Deep S3 on kunimitsu platformSubrata Banik
This patch will reset Deep S3 flag, hence S3 will work. BUG=chrome-os-partner:40635 BRANCH=None TEST=Build and Boot Kunimitsu and verify S3 is working. Change-Id: Iad87b7a8f7bf560861a270a8c19153cfc3850bc4 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: fbfaa29041be49e4c39d19cb94f01ad10d12c7d5 Original-Change-Id: I5ae1738c5de1bee1ad9a45ebde074a6a378492af Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/297903 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11643 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 14:57:27 +0000