summaryrefslogtreecommitdiff
path: root/src/mainboard/intel
AgeCommit message (Collapse)Author
2016-03-16cpu/x86: compile earlymtrr.c code for romstage as wellAndrey Petrov
In order to make this work earlymtrr.c needed to be removed from intel/truxton/romstage.c. It's not a ROMCC board so there's no reason to be including .c files. Change-Id: If4f5494a53773454b97b90fb856f7e52cadb3f44 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14094 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-03-16skylake mainboards: Configure gpio PADRSTCFG to PLTRSTNaresh G Solanki
With gpio PADRSTCFG set to DEEP & GPIROUTIOXAPIC=1 & PADRSTCFG, causes IRQ storm after S3 resume. GPIOs that fire IRQs via IOAPIC need to get their logic reset over pltrst and hence configuring PADRSTCFG to PLTRST to prevent IRQ strom after S3 resume. BRANCH=glados BUG=chrome-os-partner:50536 TEST=Build for kunimitsu and Boot on FAB4, no irq storm observed after S3 resume. Change-Id: I7f1ae90aed03778e7d6cb2d79de0efe9a6d9e20d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: aff91da4feaf8f7e42cfeee756cf468288cbfd68 Original-Change-Id: I7cac60fb0144e090b8decb05d948b2d8d2f8deac Original-Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/329453 Original-Commit-Ready: Naresh Solanki <naresh.solanki@intel.com> Original-Tested-by: Naresh Solanki <naresh.solanki@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/331174 Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org> Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13992 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-13northbridge/intel/i3100: Unify UDELAY selectionStefan Reinauer
Instead of manually including udelay_io.c in each romstage, select UDELAY_IO for all i3100 boards in the chipset. Change-Id: Ia66a0561c75777a9e98bb87117859808a2ff3732 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13786 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-13northbridge/intel/i82810: Unify UDELAY selectionStefan Reinauer
Instead of manually including udelay_io.c in each romstage, select UDELAY_IO for all i810 boards in the chipset. Change-Id: Ifda7dcfdf37b6affce838ee96ca6382b2d4be8c3 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13784 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-12intel/kunimitsu: Add SD card detect GPIO for SDHCI runtime PMmgarima
Enable SDHCI runtime PM since the display flicker due to SCC Power Gatingis addressed by 0x82 microcode BRANCH=glados BUG=chrome-os-partner:44663 TEST=Check if display flicker is gone when SCC is power-gated Change-Id: I7d1ac6e77a0d2e0a25414df6130862efcdae2c82 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: b552120cfeff09d16cb79652b7de7296121858ba Original-Change-Id: Id82df475b262e8a91f0a93f8ddf80002b05c52f3 Original-Signed-off-by: Medha Garima <medha.garima@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/329651 Original-Commit-Ready: Jenny Tc <jenny.tc@intel.com> Original-Tested-by: Jenny Tc <jenny.tc@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/331172 Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org> Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org> Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13990 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-10mainboard/intel/apollolake_rvp: Populate static devicetreeLance Zhao
Add configuration in accordance to "PCI Configuration Matrix". Change-Id: If1f60486d802a6595aed03d95e0d20fc7db21bd2 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13926 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-09mainboard/intel/apollolake_rvp: Add memory training configLance Zhao
Pass memory training information to MemoryInit, so memory training can be completed. Change-Id: Icb1bf308b77a1c8481313c259c3f3dd1d8379863 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13870 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-03-08mainboard/skylake: Include WRDD method in WIFI ACPI deviceDuncan Laurie
Include the code to add the WRDD method to the existing WiFi Device in the mainboard ACPI code. BUG=chrome-os-partner:50516 BRANCH=glados TEST=boot on chell with 'region'='us' in VPD and see that it is properly read out by calling WRDD method on the WiFi device. Compile for the other platforms that are modified. Change-Id: Ibcff7585744071ba9018d0ba50e274e63365b150 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Commit-Id: b74bb553415f7ce224ddcb0c2c5ae509b8fed516 Original-Change-Id: Ieb24e0e64974ee3686d14a234e148f5d07fc8b12 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/329296 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13840 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-08soc/intel/quark: Set the UPD values for MemoryInitLee Leahy
Set the UPD values for MemoryInit. * Update the FspUpdVpd.h file which specifies the parameters for MemoryInit. * Add the necessary values to chip.h to enable values to come from the mainboard's devicetree.cb file * Add the parameters to the mainboard's devicetree.cb file * Locate the platform configuration database file (pdat.bin) * Copy the data values from the chip_info structure into the UPDs * Display the UPD values Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file: * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate UEFIPAYLOAD.fd * Edit .config file and add the following lines: * CONFIG_DISPLAY_UPD_DATA=y * Testing successful when the UPD data is displayed before the call to MemoryInit Change-Id: Ic64f3d97eb43ea42d9b149769fc96bf78bf804f5 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13896 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2016-03-08soc/intel/apollolake: Add support for memory-mapped boot mediaAndrey Petrov
On Apollo Lake SPI flash is memory mapped. The mapping is different to previous platforms. Only "BIOS" region is mapped in contrast to whole flash. Also, the 128 KiB right below 4 GiB are being decoded by readonly SRAM. Fail accesses to those regions, rather than returning false data. Change-Id: Iac3fa74cd221a5a46ceb34c2a79470290bcc2d84 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13706 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-03-07mainboard/intel/galileo: Enable SD flash cardsLee Leahy
Turn on the SD controller to allow it to claim resources. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file: * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate UEFIPAYLOAD.fd * Edit .config file and add the following lines: * CONFIG_PAYLOAD_ELF=y * CONFIG_PAYLOAD_FILE="path to UEFIPAYLOAD.fd" * Testing successful when at the UEFI shell prompt: * After issuing: * "connect -r" * "map -r" * The "dir" command displays the contents of the SD flash card * The "drivers" command shows an SD host and SD media connection Change-Id: I883dc87270045786ddb931bea83fc36646a128e6 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13894 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-01Skylake boards: Enabling HWP (hardware P state control)Subrata Banik
This patch provides config options to enable/disable Intel SST (Speed Shift Technology). BUG=chrome-os-partner:47517 BRANCH=None TEST=Booted kunimitsu/lars, verified HWP driver load successfully. CQ-DEPEND=CL:313107 Change-Id: I9419a754384f96d308a5ac2ad90bbb519edc296e Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Commit-Id: 5efb7978e9d3ca9a709a4793ad213423a1c3c45d Original-Change-Id: I328b074b4f56ebe3caa8952ce3df7f834c1cf40f Original-Signed-off-by: Robbie Zhang <robbie.zhang@intel.com> Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/326650 Original-Tested-by: Wenkai Du <wenkai.du@intel.com> Original-Reviewed-by: Benson Leung <bleung@chromium.org> Reviewed-on: https://review.coreboot.org/13843 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-29mainboard/intel/galileo: Enable USBLee Leahy
Enable the EHCI and OHCI controllers. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file: * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate UEFIPAYLOAD.fd * Edit .config file and add the following lines: * CONFIG_PAYLOAD_ELF=y * CONFIG_PAYLOAD_FILE="path to UEFIPAYLOAD.fd" * Testing successful when at the UEFI shell prompt: * After issuing: * "connect -r" * "map -r" * The "dir" command displays the contents of the USB flash drive * A USB keyboard can issue shell commands * The "drivers" command shows an EHCI and OHCI connection Change-Id: Iad9abced98d9b645e8b12fa0845c97260cf62a72 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13857 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-26mainboard/intel/apollolake_rvp: remove bootblock_mainboard_early_init()Aaron Durbin
Now that the SoC is configuring the UART pads there's no need to implement bootblock_mainboard_early_init(). Remove it and bootblock.c. Change-Id: I2ae7ea38351733e1c9757cde20b79e1d19d0c1e5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13794 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-02-23southbridge/intel/lynxpoint: Use common gpio.cPatrick Rudolph
Use shared gpio code from common folder, except for INTEL_LYNXPOINT_LP, which has it's own gpio code. Needs test on real hardware ! Change-Id: Iccc6d254bafb927b6470704cec7c9dd7528e2c68 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/13615 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-22mainboard/intel/galileo: Enable minimal ACPI tablesLee Leahy
Enable the minimal ACPI tables. Initialize the FADT header and provide an empty DSDT. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file: * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate UEFIPAYLOAD.fd * Edit .config file and add the following lines: * CONFIG_PAYLOAD_ELF=y * CONFIG_PAYLOAD_FILE="path to UEFIPAYLOAD.fd" * Testing successful if: * Outputs multiple lines of debug serial text Change-Id: I2e30c8af2994c9f56d9ba4fe6bc35e133b1d2d6b Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13759 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-18soc/intel/quark: Enable HSUART1Lee Leahy
Enable HSUART1 for debug serial output. Specify the fixed resources in the UART driver. This keeps debug serial output flowing during the rest of the device initialization. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Testing successful if: * Debug serial output stays enabled after BS_DEV_RESOURCES state Change-Id: Ica02e5fece156b21d4a3889284ca467d55c7880d Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13730 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-18intel/kunimitsu: Set USB Type A current limit to 2ANaresh G Solanki
The GPIO USB_A0_ILIM_SEL & USB_A1_ILIM_SEL should be low to enable 2A charging from the USB Type-A port. BUG=chrome-os-partner:50212 BRANCH=glados TEST=Build CB & booted kunimitsu, verified that USB_A0_ILIM_SEL & USB_A0_ILIM_SEL are at logic zero. Change-Id: I989987eaaa2015720bbb1403caf20b97a996e168 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 640834506ad749359104e24fdb664044d499fd5f Original-Change-Id: I741f79a69b78dbb7d4f8cb9718355d802b94b96d Original-Signed-off-by: Naresh G Solanki <Naresh.Solanki@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/327121 Original-Commit-Ready: Naresh Solanki <naresh.solanki@intel.com> Original-Tested-by: Naresh Solanki <naresh.solanki@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13722 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-18southbridge/intel/bd82x6x: Use common gpio.cPatrick Rudolph
Use shared gpio code from common folder. Bd82x6x's gpio.c and gpio.h is used by other southbridges as well and will be removed once it is unused. Change-Id: I8bd981c4696c174152cf41caefa6c083650d283a Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/13614 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-17mainboard/intel/galileo: Enable PCIe root port 0Lee Leahy
Enable PCIe root port 0 Testing on Galileo: * Add a 802.11 wireless card in the mini-PCIe slot * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Testing successful if: * After PCI 00:17.0, memory addresses are assigned to the 802.11 wireless card on PCI 01:00.0 during BS_DEV_RESOURCES state Change-Id: I68ea25b8e594480fe5146ffad75e293e346e9517 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13723 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-17mainboard/intel/galileo: Disable the remaining PCI devicesLee Leahy
Add additional lines to the devicetree.cb file to disable the PCI devices in the Quark SoC. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Testing is successful if: * Devices show up as disabled in BS_DEV_ENUMERATE state or ramstage Change-Id: I1edbbcb88cef29ce972ef054c82e37bf07c3761d Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13720 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-12emeraldlake2: Support native raminit.Vladimir Serbinenko
Change-Id: I808a739c91cb52782db46fd4897b6b913224d93f Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13666 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2016-02-12chromebooks: Define GBB hardware IDsPatrick Georgi
This makes the test IDs the default, taken from depthcharge master (board/*/fmap.dts, hwid property). Change-Id: I25793962ac16f451f204dbba6ede6a64c847cfd5 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13634 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-02-12Make MRC vs native a config rather than making a separate chipset for it.Vladimir Serbinenko
Tested by making lenovo x230 configurable despite pretty MRC bugs. Change-Id: Ia2a123f24334f5cd5f42473b7ce7f3d77c0e65b7 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13658 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-12Move gpio.h to gpio.c on sandy and ivy.Vladimir Serbinenko
Change-Id: Ic9d8c2a4e5125eca20eb692ac7ed070fda6cbe32 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13657 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-12Merge sandy/ivybridge romstage flow for MRC and non-MRC.Vladimir Serbinenko
Change-Id: I11e09804ed1d8a7ae8b8d4502bd18f6be933f9fa Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13656 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-11soc/apollolake: Add early serial driver for BOOTBLOCK_CONSOLEAndrey Petrov
Early UART driver is for bootblock and romstage. It is supposed to be used when BOOTBLOCK_CONSOLE is enabled. This also adds few configuration bits in bootblock requiered for serial to be set up. Change-Id: I15520d566f107797e68d618885d4379e73d0fa45 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13677 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-11mainboard/intel: Add skeleton for Apollolake RVP board familyAlexandru Gagniuc
RVP1 board comes with DDR3 SODIMMs and discrete VRs. RVP2 board uses LPDDR3 and PMIC. Change-Id: I3e47c157c49ad55ff1ba824672ac2630a64a6037 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13298 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-02-09chromebooks: Configure Chrome EC board namesPatrick Georgi
For devices with Chrome EC, state the "board" name(s), so they're built as part of the image. A number of EC boards aren't supported in the Chrome EC master branch, they're brought along but commented out, waiting for a port to master in the Chrome EC code base. Change-Id: Ic6ab821de55cf9b4e8b48fe5ebc603adeb8bb28b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13548 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-09intel/kunimitsu: Clean up GPIOs.Pratik Prajapati
Some of the pins are not connected/used on kunimitsu board, this patch will make them "Not connected". Un-used PINS will controlled by GPIO controller (PMODE = GPIO) and GPIO TX/RX will be disabled. BRANCH=none BUG=none TEST=Build and booted in kunimitsu. Change-Id: Iaf0d4806836648808fb91cfc7807c4c1595a5167 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a7c25ad8ee0d189178124cff20569152b1053488 Original-Change-Id: I3add625b2bf01223cd389c6a5585827ac62dd0c0 Original-Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/316700 Original-Commit-Ready: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Original-Tested-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/13629 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09mb/intel/d510mo: Explicitly select NIC on PCI in devicetreeDamien Zammit
While the board configuration still works without this, It's nicer to have the device statically defined since the NIC is hardwired to the board. Change-Id: Ic6682865dd17672c3782bfba9511cd120d1657c1 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13455 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09skylake mainboards: Enable backing up VBNV from CMOS to flashDuncan Laurie
Enable the option to back up Vboot non-volatile data from CMOS to flash as these boards have the necessary nvram fmap region and are using vboot2 which does not backup to the TPM. BUG=chrome-os-partner:47915 BRANCH=glados TEST=manually tested on chell Change-Id: I7bfe88f2cb7826f3315987aaf56f77df708896ce Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 35df03c5ef24406129cba920ee9af6d55458cd45 Original-Change-Id: Ia7c014fe2768c55941a65ec5605ef4fbc986151c Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/324123 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13601 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09intel/kunimitisu: set oem_id oem_table_id fields of acpi_header_tFang, Yang A
kunimitisu platform updated these two fields if maxim codec is detected. BUG=chrome-os-partner:49570 BRANCH=glados TEST=Build & Booted kunimitsu board. Verified that kernel can read new strings. Change-Id: Icbe0d87f0b46da794db36191b0e12948fe6a2fe6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f3d07ef07c382a2df140b457273feb3899228e10 Original-Change-Id: Ia6a111d15b851ae3fa918816e13b54ace215a09a Original-Signed-off-by: Fang, Yang A <yang.a.fang@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/324631 Original-Commit-Ready: Yang Fang <yang.a.fang@intel.com> Original-Tested-by: Yang Fang <yang.a.fang@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13603 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-05mainboard/intel/galileo: Add board_info.txtLee Leahy
Add missing file to fix complaints by git commit script. TEST=None Change-Id: I4aac63821a7208fb86fa6c0dda16b7537e49a69a Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13610 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-04mainboard/intel/galileo: Add Intel Galileo Gen 2 SupportLee Leahy
Add the files to build soc/intel/quark and mainboard/intel/galileo for a minimal coreboot image. Please note that this configuration does not run. Include HTML documentation for the Galileo Gen 2 board. Testing is successful if build completes successfully. TEST=Build for Galileo Change-Id: Idd3fda1b8ed9460fa8c92e6dcaa601c3c9f63a36 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13507 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-04skylake boards: disable ACPI PM TimerArchana Patni
These devicetree patches set the ACPI PM Disabled variable to 1. This will disable the ACPI PM timer and remove from FADT table. BRANCH=none BUG=chrome-os-partner:48646 TEST=Build for skylake board with the PmTimerDisabled policy in devicetree set to 1. iotools mmio_read32 0xfe0000fc should return 0x2. cat /sys/devices/system/clocksource/clocksource0/available_clocksource should list only "tsc hpet". acpi_pm should be removed from this list. Change-Id: Ia66f37e13f0f2f527651418b8b5c337b56c25c7f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: db3e8130495038850c7034b89701b4a5fcf88dce Original-Change-Id: Ib1b876cfa361b8cbdde2f9e212e3da4fd724e498 Original-Signed-off-by: Archana Patni <archana.patni@intel.com> Original-Signed-off-by: Subramony Sesha <subramony.sesha@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/319362 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13589 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04intel/kunimitsu: perform early init for CAR *stageAaron Durbin
In order to support both separate verstage and a verified boot after romstage one needs to ensure the proper GPIO and EC configuration been complete. Therefore, move that logic to car_mainboard_post_console_init() in car.c file which gets called in the early flow of a CAR stage (either verstage or romstage). BUG=chrome-os-partner:44827 BRANCH=glados TEST=Built kunimitsu w/ separate verstage. Change-Id: If34cae5516a6df7f72f1f57cab495db70787177e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 543155665e1b05efe82c7440c124a5c83c656aa6 Original-Change-Id: I7281c4373fcbaaf0beedaa63dcf0dedb5316349f Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/324074 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13584 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-02src/: Fix Kcofig symbols missing CONFIG_ prefixMartin Roth
- Add CONFIG_ prefix to two symbols. - Remove the use of the third symbol as it will never be matched. Change-Id: Ifa7f6884001cb05fb8397f193c4b08a0161f498c Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13539 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-29src/: Chmod 644 all .c, .h, .asl, .inc, .cb, .hex, & Kconfig filesMartin Roth
Some trivial cleanup. Change-Id: I866efc4939b5e036ef02d1acb7b8bb8335671914 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13427 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-01-28intel/strago: Update DPTF parameters to higher temperature.Divagar Mohandass
Fish bowl HTML5 graphics benchmark with 250 fish is not reaching 60 FPS. This change will update the DPTF parameters to accommodate this test. TEST=Run fish bowl benchmark with 250 fish and check for 60 FPS. Change-Id: I6b6827199cb0f5ab44c354abc477ea73e4de9ec5 Original-Signed-off-by: Divagar Mohandass <divagar.mohandass@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/302208 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13484 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28intel/strago: Fix for Crossystem "wpsw_cur" statusKumar, Gomathi
The GPIO mapping was incorrect for wpsw_cur. The GPIOs for East community are in two ranges - 0: INT33FF:02 GPIOS [373 - 384] PINS [0 - 11] and 12: INT33FF:02 GPIOS [385 - 396] PINS [15 - 26] The discontinuity was not accounted for, hence the error.Original offset was 0x16 whereas it should be 0x13 TEST=Run crossystem and test wpsw_cur entry. If screw is present, it should be 1 and if not present, it should be 0 Change-Id: I29e19589b3a358a42818afbc6d017d6cbc6a9c4c Original-Signed-off-by: Kumar, Gomathi <gomathi.kumar@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/291572 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Icarus W Sparry <icarus.w.sparry@intel.com> Reviewed-on: https://review.coreboot.org/13424 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28intel/strago: Get Boot Flash Write Protect statusHannah Williams
Read GPIO to get the status Change-Id: Id2d56ce4b47c4cccba2de3f113afaee6c49885c9 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/13186 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28Braswell: Separate L1 Sub State init procedure for boards.Kenji Chen
Original-Reviewed-on: https://chromium-review.googlesource.com/312743 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Signed-off-by: Kenji Chen <kenji.chen@intel.com> Change-Id: Ib0a891f229477cf359bff6cd02f305606468f07f Signed-off-by: Hannah Williams <hannah.williams@intel.com> Signed-off-by: Kenji Chen <kenji.chen@intel.com> Reviewed-on: https://review.coreboot.org/12750 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28Strago: Enable CA MirrorShobhit Srivastava
Configuring UPD PcdCaMirrorEn. This is a board specific parameter. CA mirror is the Command Address mirroring option that is enabled on this board CQ-DEPEND=CL:13038 Original-Reviewed-on: https://chromium-review.googlesource.com/309190 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Hannah Williams <hannah.williams@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I05174e18d650332d838e5036c713e91c4840ee75 Signed-off-by: Divya Sasidharan <divya.s.sasidharan@intel.com> Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/12749 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28Strago: Disable SD Card Detect Simulation in FSPHannah Williams
CQ-DEPEND=CL:12742 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Change-Id: I6c39ffebe407a4ef8555b2f050a96d33709dc624 Reviewed-on: https://review.coreboot.org/13035 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28intel/strago: Remove support for older rev boardsHannah Williams
Cleaning up code to remove support for early revs of Strago board Change-Id: Ic0647a17d78164fd7dfadc731c9395a8ba08c235 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/13434 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28soc/braswell: Configure Boot Flash Write Protect status GPIOHannah Williams
Set up the GPIO(MF_ISH_GPIO_4) to read WP status. TEST=Use crossystem to read the WP status Signed-off-by: Hannah Williams <hannah.williams@intel.com> Change-Id: I17cbcba013e2a11c2527731df985aa1243065eff Original-Reviewed-on: https://chromium-review.googlesource.com/302424 Original-Tested-by: John Zhao <john.zhao@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Hannah Williams <hannah.williams@intel.com> Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/13185 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28intel/strago: Enable native mode on sd card cd lineJagadish Krishnamoorthy
Configuring Native Mode enables the card present bit in sd card controller register. TEST=Sd Card Plug/Unplug should work in OS and DepthCharge. Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I2f017bdd7125f324fb58a88485cd83110851fbc5 Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Signed-off-by: Hannah Williams <hannah.williams@intel.com> Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/12741 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28intel/strago: Disable unused lines on Gpio North BankJagadish Krishnamoorthy
The unused lines leads to spurious interrupts on few of the systems. TEST=run suspend_stress test and make sure that kbd is working. Change-Id: Ie539e1debc15dd1fd8707f8866c65714fc43e44b Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/313417 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/13176 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28soc/braswell: Fix DSP clockfdurairx
The codec clock frequency was incorrectly set to 25MHz. The only available frequency is 19.2MHz through external clock and PLL. Original-Reviewed-on: https://chromium-review.googlesource.com/295768 Original-Tested-by: Hannah Williams <hannah.williams@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I9bef334a5a3aaee28fcc4937180896ff49969bc5 Signed-off-by: Felix Durairaj <felixx.durairaj@intel.com> Reviewed-on: https://review.coreboot.org/12732 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28mb/intel/d510mo: Use SATA AHCI by defaultDamien Zammit
Change-Id: I6f9772c5bcf9a50dfbc3d1cfaeb79f4454d1fb27 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13454 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2016-01-28mb/intel/d510mo: Use native gfx initializationDamien Zammit
Change-Id: Ic4de7a762e90b379be3814afc61467e1cd099215 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13034 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2016-01-28mb/intel/d510mo: Add CPU, SMI-trap and PIC to DSDTDamien Zammit
Change-Id: I80853cadb4762d9bb34926e31d65d248c5683417 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13453 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2016-01-28mb/intel/d510mo: Add missing GPIO and GPENDamien Zammit
Change-Id: I56c0a55d57d8beabcb33cf1984b037556a71a8b9 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13452 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2016-01-28nb/intel/pineview: Native VGA init (CRT)Damien Zammit
VGA grub console works but display wobbles left/right drm/i915 driver reports one error: - [drm:i915_irq_handler] *ERROR* pipe A underrun - Monitor does not display 1920x1080 after modeset - Other resolutions look out of sync Cause: suspect single bug in raminit (chipset init) Change-Id: I2dcf59f8f30efe98f17a937bf98f5ab7221fc3ac Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/12921 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28intel/strago: Set LPC_CLKRUNB to PU_20K to solve leakage issue.Kane Chen
LPC_CLKRUNB pin needs to be set to PU_20K to prevent leakage TEST=Test on Strago and make sure the leakage is gone Signed-off-by: Kane Chen <kane.chen@intel.com> Change-Id: Id2bf7511806cdc52b505bb469238a9465b356352 Original-Reviewed-on: https://chromium-review.googlesource.com/317020 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Tested-by: Kane Chen <kane.chen@intel.com> Original-Commit-Queue: Kane Chen <kane.chen@intel.com> Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/13175 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28intel/strago: EC_IN_RW gpio input configuration.Divagar Mohandass
Configure EC_IN_RW signal as gpio input. TEST=Boot to Chrome OS in normal mode and enter recovery mode use ctrl-d to switch to Dev mode. Change-Id: I835a1c70d89ef2ab75c35233f889124b60bb64a3 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/304040 Original-Tested-by: Divagar Mohandass <divagar.mohandass@intel.com> Original-Reviewed-by: Gomathi Kumar <gomathi.kumar@intel.com> Original-Reviewed-by: Shobhit Srivastava <shobhit.srivastava@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Shobhit Srivastava <shobhit.srivastava@intel.com> Reviewed-on: https://review.coreboot.org/13124 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28intel/strago: Clean up DDR configuration.Divagar Mohandass
This change includes following changes: - Clean up the DDR configuration and flow. - Removing support for non LPDDR3 boards. - Supporting only LPDDR3 and PMIC config. TEST=Build/flash CB and boot the platform to OS. Change-Id: I8369443da728a4c07e0c1a82040d94034c3542da Signed-off-by: Divagar Mohandass <divagar.mohandass@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/297941 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Jenny Tc <jenny.tc@intel.com> Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/13122 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28intel/strago: Disable unused devices.Divagar Mohandass
This change will disable unused devices in device tree to improve boot performance. TEST=Build/Flash CB and boot to OS. verify Touch screen, Audio, WIFI and Track pad functionality. Change-Id: Ib5ae31c96d75f9a5b0f8d8b72d058e18fe7d7e67 Signed-off-by: Divagar Mohandass <divagar.mohandass@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/300943 Original-Reviewed-by: Hannah Williams <hannah.williams@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Gomathi Kumar <gomathi.kumar@intel.com> Reviewed-on: https://review.coreboot.org/13423 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-27intel/strago: Fix GPIO configHannah Williams
Fix GPIO config for this board: - SD card detect to GPI - SATA GPI to not used - GPIO_SUS1 and GPIO_SUS11 to GPI with pull up (1K and 20K)termination - I2C4 SDA and SCL from not used to Native Change-Id: Iecb23df465a540a71f7268c5aac48617dc74ebf2 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/13431 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-27intel/sklrvp: Remove mainboardMartin Roth
The Intel Skylake RVP3 mainboard is not building, and according to Intel, there is no plan to continue working on it for coreboot. The intel/kunimitsu board is the Skylake reference design for coreboot.org. Change-Id: Icb4e42fdb560cc3188ca29c465674f5e0b11569b Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13469 Tested-by: build bot (Jenkins) Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
2016-01-26mainboard/intel/d510mo: Licence fixes and azalia verb tableDamien Zammit
Azalia verb table replicated from vendor bios. Licence headers added where appropriate. Change-Id: I29e4fe433dee6c5f30fe36055fc9a8bf2062fef5 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/12621 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2016-01-22intel/strago: Set POWER_SOURCE_CONFIG in devicetree.cbKane Chen
SVID config set to SVID_PMIC_CONFIG BUG=none BRANCH=none TEST=build, boot to OS and check the register is set properly Change-Id: If63b8112d4da0347c3a2c4c6d82b12a1f618291c Signed-off-by: Kane Chen <kane.chen@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/308576 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13117 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-22intel/strago: Add method for Wifi regulatory domainHannah Williams
WRDD method in wifi.asl returns the regulatory domain code. This value is read from VPD in wifi_regulatory_domain() and saved to global nvs if CONFIG_HAVE_REGULATORY_DOMAIN is enabled. It returns default code if CONFIG_HAVE_REGULATORY_DOMAIN is not enabled. Original-Reviewed-on: https://chromium-review.googlesource.com/315131 Original-Tested-by: Hannah Williams <hannah.williams@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I52e0a052d31f36c6dc04e6a0953456350e7d86c3 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/12746 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-22skylake mainboards: Enable CONFIG_VBOOT_EC_SLOW_UPDATEDuncan Laurie
Updating EC+PD takes long enough to update that it is good to show the "critical update" screen when doing an EC/PD update. BUG=chrome-os-partner:49650 BRANCH=glados TEST=Build and boot on chell in normal mode with an EC update payload and ensure that it reboots to enable graphics, shows the "critical update" screen, and then reboots to disable graphics init again. Change-Id: I436b96b95595b68273e594bdcfe2db0789ee26b2 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 08e45decd066f8f57ad103ff8b76cb7a916afa9e Original-Change-Id: Ie250f4531437e4a0ce14b5aeb0fe564e9461fe4d Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/322783 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13075 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-22intel/skylake: PL2 override changespchandri
Override the default PL2 values with ones recommended by Intel. BUG=chrome-os-partner:49292 BRANCH=glados TEST=MMIO 0x59A0[14-0] to find PL1 value (0x78) / 8 Watts = 15W MMIO 0x59A0[15] to find PL1 enable/disable = Disable MMIO 0x59A0[46-32] to find PL2 Value (0xC8) / 8 Watts = 25W Here PL2 is set to 25W and PL1 is disabled. CQ-DEPEND=CL:321392 Change-Id: I338b1d4879ae1b5f760e3c1d16e379a2baa1c965 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: fa6a115227385bef44abfacf58af306c16ed478a Original-Change-Id: I3bfc50256c9bdd522c984b11faf2903d7c44c81f Original-Signed-off-by: pchandri <preetham.chandrian@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/322454 Original-Commit-Ready: Venkateswarlu V Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Original-Tested-by: Venkateswarlu V Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Preetham Chandrian <preetham.chandrian@intel.com> Original-Reviewed-by: Venkateswarlu V Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Reviewed-on: https://review.coreboot.org/13071 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-21chromeos: import Chrome OS fmapsPatrick Georgi
These are generated from depthcharge's board/*/fmap.dts using the dts-to-fmd.sh script. One special case is google/veyron's chromeos.fmd, which is used for a larger set of boards - no problem since the converted fmd was the same for all of them. Set aside 128K for the bootblock on non-x86 systems (where the COREBOOT region ends up at the beginning of flash). This becomes necessary because we're working without a real cbfs master header (exists for transition only), which carved out the space for the offset. Change-Id: Ieeb33702d3e58e07e958523533f83da97237ecf1 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/12715 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-19intel/kunimitsu: Add device properties for Nuvoton codecYong Zhi
This patch added default values for two SAR properies introduced by updated nau8825 codec driver. Also updated sar-threshold to improve button detection accuracy. Bug=chrome-os-partner:49394 BRANCH=glados TEST=Build for kunimitsu. Tested with 4-button headset Change-Id: I4096c60be54819d0ab2bf4b72a1e403f88d96af0 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 4b747e9dffed1c51131f0028879d4c22283c8ec5 Original-Change-Id: I3e222ff58c1483e261acf1cea297164966bf8689 Original-Signed-off-by: Yong Zhi <yong.zhi@intel.com> Original-Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/322241 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13014 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-19intel/kunimitsu: Set I2C[4] port voltage to 1.8vNaresh G Solanki
As the audio card needs 1.8V I2C operation. This patch adds entry into devicetree.cb to set I2C port 4 operate at 1.8V. Branch=None Bug=chrome-os-partner:47821 Test=Built & booted kunimitsu board. Verified that I2C port 4 is operating at 1.8V level CQ-DEPEND=CL:*242225, CL:*241206, CL:315167 Change-Id: Ida69b885737aef0cfcf6a6ca21b3650169e614d9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 990df9c1c65e75aae0a1329ead3790e78021b804 Original-Change-Id: Ifbb65e3d83561b52cc18e48b89d146c2f88f289b Original-Signed-off-by: Naresh G Solanki <Naresh.Solanki@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/315168 Original-Commit-Ready: Naresh Solanki <naresh.solanki@intel.com> Original-Tested-by: Robbie Zhang <robbie.zhang@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13010 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-19intel/kunimitsu: Enable FspSkipMpInit tokenRizwan Qureshi
MP init is already handled in coreboot, but it is also part of FSP FSP has a implemented a provision to allow FSP to skip MP init and let coreboot handle it. BRANCH=none BUG=chrome-os-partner:44805 TEST=Build and booted in kunimitsu with SkipMpInit enabled from CB. CQ-DEPEND=CL:310192 Change-Id: Idd9b1424f23765ce227005a322ac72d9e9fc841a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 5c52d0f0cc5d480c87fababc3316009e3ade6e45 Original-Change-Id: I9d92046d0237680b8d562814a9a605a36efb9516 Original-Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/312926 Original-Commit-Ready: Preetham Chandrian <preetham.chandrian@intel.com> Original-Tested-by: Preetham Chandrian <preetham.chandrian@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12992 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-19intel/skylake: Enable SaGv featureharidhar
This change enables SaGv feature for skylake platform.As a result of this patch the skylake platform will train memory at both low & high frequency points.This will be used to dynamically scale the work point (voltage/frequencies). The value "3" here means enable. Following is the table for same. 0=Disabled(SaGv disabled) 1=FixedLow(Fixed to low frequency) 2=FixedHigh(Fixed to High frequency) 3=Enabled(SaGv Enabled.Dynamically changes) BRANCH=None BUG=chrome-os-partner:48534 TEST=Built for kunimitsu. Tested on D1 silicon. Change-Id: I2892d631d64495e6aed453af4fd526f4bf5bed68 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8e09d1a22927f5fcddd6c0be3f9edf3dcb8729be Original-Change-Id: I32a7a53805068a52b381affaf061d69062cd8651 Original-Signed-off-by: haridhar <haridhar.kalvala@intel.com> Original-Signed-off-by: Somayaji, Vishwanath <vishwanath.somayaji@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/315806 Original-Commit-Ready: Haridhar Kalvala <haridhar.kalvala@intel.com> Original-Tested-by: Haridhar Kalvala <haridhar.kalvala@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Haridhar Kalvala <haridhar.kalvala@intel.com> Reviewed-on: https://review.coreboot.org/12997 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-18intel/kunimitsu: Set BOOT_BEEP gpio to a default loRohit Ainapure
The BOOT_BEEP gpio is used to activate the buffer which isolates the I2S signals from PCH while doing a beep from depthcharge. It needs to be lo to deactivate the buffer for audio playback from OS. BUG=chrome-os-partner:47124 BRANCH=None TEST=boot depthcharge & test beep with devbeep. Boot OS and test audio playback. Change-Id: I047513f6cbe9590820dfe3c369161a157864be97 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d0e04d6792a4511630b8111d0f4a64226042f3e6 Original-Change-Id: I0fa8f425ac413798740343823d026c6300c8eef1 Original-Signed-off-by: Rohit Ainapure <rohit.m.ainapure@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/319220 Original-Commit-Ready: Rohit M Ainapure <rohit.m.ainapure@intel.com> Original-Tested-by: Michael Rang <michael.rang@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/12988 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-18skylake boards: csme: add p2sb device and hecienabled devicetree variableArchana Patni
The HeciEnabled decides the state of Heci1 at end of boot. Setting to 0 (default) disables Heci1 and hides the device from OS. It internally uses the FSP Psf Unlock policy to disable the Heci1. It also adds the p2sb device in the devicetree which is necessary for hiding and unhiding the device. BRANCH=none BUG=chrome-os-partner:45618 TEST=build for kunimitsu. CQ-DEPEND=CL:*238451 Change-Id: Ieba2ab3b4ac518cce8371069028170ba99aaf079 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: cbefe9d6e9a981594534d346be67a5cd94483d05 Original-Change-Id: I8c95b5b9b28ba8441ca031f4e9ec523d913990d6 Original-Signed-off-by: Archana Patni <archana.patni@intel.com> Original-Signed-off-by: Subramony Sesha <subramony.sesha@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/311913 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12977 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-18intel/kunimitsu: Power gate Kepler devicePravin Angolkar
This patch power gates the Kepler module on skylake kunimitsu board. This is required to save power since this is consuming over 500mw of power in all active use cases. The device can be powered on later by using the kernel driver as required by setting the kepler enable gpio high. BRANCH=None BUG=chrome-os-partner:45962 TEST=Build and Boot Kunimitsu and check lspci. The Kepler device should not be listed. Also power measurement of board should give approximately 300mW of reduction in power. Change-Id: I244a23385e20ef1431dc895536c8a47e1f5770d7 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8d4fb7d01f32ac307a351c307b8461628c0e5414 Original-Change-Id: Idafa74d7ff14d67a5b1e635f783efd84b5a7399c Original-Signed-off-by: Pravin Angolkar <pravin.k.angolkar@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/302277 Original-Commit-Ready: Naveenkrishna Ch <naveenkrishna.ch@intel.com> Original-Tested-by: Pravin K Angolkar <pravin.k.angolkar@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12964 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-18intel/kunimitsu: Enable TPM PIRQRishavnath Satapathy
Enable the config option for TPM to use PIRQ instead of SERIRQ and enable the MAINBOARD_HAS_LPC_TPM option. BUG=chrome-os-partner:46335 BRANCH=none TEST=tested this patch with TPM ACPI driver(tpm_tis.force=0) Change-Id: I311cc7d2e70cc52a7e90f3c3c60d422b7b998789 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: ad9450c342c752f87e3385a2acd5dd79b65cc75f Original-Change-Id: Ib7b1b40c296fce80d5366bd19e7ff20d7161db95 Original-Signed-off-by: Rishavnath Satapathy <rishavnath.satapathy@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/316287 Original-Commit-Ready: Pravin K Angolkar <pravin.k.angolkar@intel.com> Original-Commit-Ready: Naveenkrishna Ch <naveenkrishna.ch@intel.com> Original-Tested-by: Pravin K Angolkar <pravin.k.angolkar@intel.com> Original-Reviewed-by: Pravin K Angolkar <pravin.k.angolkar@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/12963 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-18intel/kunimitsu: add nhlt supportNaresh G Solanki
Provide an option for including the NHLT blobs within the kunimitsu mainboard directory while also adding the ACPI NHLT table generation that the current hardware supports. Kunimitsu does support two audio codec, ADI and MAXIM, hence use AUDIO_DB_ID to read correct codec and craete NHLT table, this will also help to load only one amplifier ASL for machine driver consumption. BUG=chrome-os-partner:44481 BRANCH=None TEST=Built and booted kunimitsu board. Audio worked with both ADI and MAXIM audio card. CQ-DEPEND=CL:316352 Change-Id: Ic9b9af83a0229fdf5f1cb019245ae65ad9d2f06c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 2db85062d65c5e831da297588aa4abb18d6ed1bb Original-Change-Id: I3b08f3f23b334799a81cde81a30d6f231cc8583f Original-Signed-off-by: Naresh G Solanki <Naresh.Solanki@intel.com> Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/315450 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12959 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-16mainboard: Drop abuild.disabled files for Skylake boardsStefan Reinauer
Make sure the latest & greatest Intel targets actually build in our build system. intel/sklrvp is still failing for reasons unrelated to the rest of the skylake boards. Leaving that disabled for now. Change-Id: Ie784628a57257cea30e5e47074648198b884f6db Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12857 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2016-01-16intel/kunimitsu: remove/disable Wake on lanRizwan Qureshi
remove the WakeConfigWolEnableOverride to disable WOL override configuration in the General PM Configuration B (GEN_PMCON_B) register BRANCH=none BUG=none TEST=Build and booted in kunimitsu Change-Id: Ia523e7956c06c9f4a60e0a2296f771cc3c70bc25 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 12a07eebfb8fa4ee8013fbbb12283a0b429cacfd Original-Change-Id: I2be6c5b0114e4c7d8a7b9ceb59ee32f28f61769f Original-Reviewed-on: https://chromium-review.googlesource.com/316717 Original-Commit-Ready: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Tested-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12958 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-16intel/kunimitsu: Add VrConfig UPD parametersRizwan Qureshi
Cofigure VR settings for kunimitsu BRANCH=none BUG=chrome-os-partner:45387 TEST=Build and booted in kunimitsu CQ-DEPEND=CL:311317 Change-Id: Ib2afe7694d2a807cea1befa73349bd21a3e7d909 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: c3548d7cb3a00826377e819f20d07167b4eb2c65 Original-Change-Id: I6b80f509bc0ab6f65f26eec0651a3b44fb38fbf9 Original-Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/313068 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12945 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-15intel/kunimitsu: Add new configuration parametersRizwan Qureshi
Add new configuration parameters eg. #SLP_S3 assert width BRANCH=none BUG=chrome-os-partner:44075 TEST=Build and booted on kunimitsu, verified that CB is doing the Lockdowns which were previously done by FSP. CQ-DEPEND=CL:310869 Change-Id: I782df49bbf73c121b191f0661907173c4fd29b64 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: de0742869b1b148597d3714a3bc29a0dc08642aa Original-Change-Id: I2b4041cdc22a29e79d2ff7f2cc49f51f80da5567 Original-Reviewed-on: https://chromium-review.googlesource.com/313309 Original-Commit-Ready: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Tested-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12942 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-15intel/kunimitsu: Enable 20K PU on LPC_LAD 0-3pchandri
At S0, S0ix and S3 LPC LAD signals are are floated at 400~500mV. BRANCH=chrome-os-partner:48331 BUG=None TEST=Build and Boot kunimitsu Change-Id: I2e2654ac89f8e0c8d6ab1af31d0bd5a0d4c43db8 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 6f4b902e220dcde73df56970208c45fe3148b70e Original-Change-Id: I597d4816d09d0cfd9b0ec183a9273551aed8688a Original-Signed-off-by: pchandri <preetham.chandrian@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/316529 Original-Commit-Ready: Preetham Chandrian <preetham.chandrian@intel.com> Original-Tested-by: Preetham Chandrian <preetham.chandrian@intel.com> Original-Tested-by: Kyoung Il Kim <kyoung.il.kim@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Preetham Chandrian <preetham.chandrian@intel.com> Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Original-Reviewed-by: Kyoung Il Kim <kyoung.il.kim@intel.com> Reviewed-on: https://review.coreboot.org/12957 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-15intel/kunimitsu: Correct the output for crossystem wpsw_bootArindam Roy
The write protect GPIO is not being configured early enough. This is leading to coreboot reading incorrect value, and writing the incorrect value in vboot shared file. This is leading to "crossystem wpsw_boot" always returning 0 even with the write protect screw in place during boot. BUG=chrome-os-partner:48292 BRANCH=None TEST=Boot with the write protect screw in place. Issue crossystem wpsw_boot. It should show 1. Change-Id: I3a333a4dcce31be9afe28cf11b127090cc7b9421 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 462dd0229c2d3b81cd34bdd2e36bea844f58586c Original-Change-Id: Ib7e0539845575b32322e243e89b81ffee077eb81 Original-Signed-off-by: Arindam Roy <arindam.roy@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/316009 Original-Commit-Ready: Arindam Roy <rarindam@gmail.com> Original-Tested-by: Arindam Roy <rarindam@gmail.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12952 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-15intel/kunimitsu: Add support for MAX98357A audio amplifierRohit Ainapure
Adding support for Maxim 98357A audio amplifier. BUG=chrome-os-partner:44481 BRANCH=None TEST=Build & boot on Skylake kunimitsu Fab4 with MAXIM codec. Verify audio playback works using MAXIM. Change-Id: I4f020ccae540b02d5d533704a52cebb7805715fe Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: c0a81300e02e917500fa3c0241c95dd795abaf04 Original-Change-Id: I8875c9a55f09b1ec353203cfcb2186dc5fd66542 Original-Signed-off-by: Rohit Ainapure <rohit.m.ainapure@intel.com> Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/309894 Original-Tested-by: Rohit M Ainapure <rohit.m.ainapure@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12949 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-15intel/kunimitsu: Update the PL1 value as TDPSumeet Pawnikar
Currently, the Power Limit 1 (PL1) value is 6W which is low for high performance KPIs. This patch updates PL1 value as TDP. SKL-U has 15W TDP. BRANCH=None BUG=None TEST=Built and boot on kunimitsu. Check for the PL1 value over sysfs interface "/sys/class/powercap/intel-rapl:0/constraint_0_power_limit_uw". Load the system with Aquarium 1000 Fish, average FPS should be meeting target 60 with this change. Change-Id: I8e083192e8018edc2cf8b88530df1e05ede10bde Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: eb9aa00a4271875b5471c33883aa7da022f1cb0e Original-Change-Id: I0c61fe1a9f76a9cf9a306240fb66d4c081d2bb5e Original-Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/314416 Original-Commit-Ready: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Original-Tested-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/12934 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-13tree: drop last paragraph of GPL copyright header from new filesMartin Roth
This continues what was done in commit a73b93157f2 (tree: drop last paragraph of GPL copyright header) Change-Id: Ifb8d2d13f7787657445817bdde8dc15df375e173 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12914 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-13intel/skylake platforms: Add MAINBOARD_HAS_LPC_TPM in KconfigMartin Roth
Because these platforms haven't been getting build testing, they've missed out on some of the improvements that the other platforms have gotten. Enable MAINBOARD_HAS_LPC_TPM so that they will build. Change-Id: I5e44135b6dfa800fa14e5b08c3e3e5921d50b082 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12865 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-07mainboard: Drop abuild.disabled files for Braswell boardsStefan Reinauer
Make sure the latest & greatest Intel targets actually build in our build system. Change-Id: I479ad473c260fc914d224cb58f4be1837aff2502 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/12463 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-07google/cyan, intel/strago Kconfig: Only ask to display SPD onceMartin Roth
Change-Id: Ic3df9bf7d7f3c4c39789f3f496bcb7fc2ee50931 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12827 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-01-06intel/braswell: Build in both C0 and 'other' vbiosMartin Roth
The Braswell CPU seems to have two different Video BIOS roms, one for the C0 revision, and one for other revisions. Build them both into the coreboot image, and let coreboot sort out which one should be used at runtime. This should allow one rom to be used for all revisions. The initial reason for this patch was that the Kconfig symbol C0_DISP_SUPPORT didn't exist, and was causing issues. This seems like the best way to eliminate the need for that symbol. Change-Id: I5b9f225c0daf4e02fda75daf9cd07bb160bf0e0f Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12826 Tested-by: build bot (Jenkins) Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-12-16intel/fsp_baytrail: rename include folder baytrail to include/socBen Gardner
This is to match the layout of the non-fsp baytrail to make comparisons easier and possibly remove duplicate files. Change-Id: I9a94842d724ab3826de711d398227e7bdc1045ff Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/12686 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-12-10cbfs/vboot: remove firmware component supportAaron Durbin
The Chrome OS verified boot path supported multiple CBFS instances in the boot media as well as stand-alone assets sitting in each vboot RW slot. Remove the support for the stand-alone assets and always use CBFS accesses as the way to retrieve data. This is implemented by adding a cbfs_locator object which is queried for locating the current CBFS. Additionally, it is also signalled prior to when a program is about to be loaded by coreboot for the subsequent stage/payload. This provides the same opportunity as previous for vboot to hook in and perform its logic. BUG=chromium:445938 BRANCH=None TEST=Built and ran on glados. CQ-DEPEND=CL:307121,CL:31691,CL:31690 Change-Id: I6a3a15feb6edd355d6ec252c36b6f7885b383099 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12689 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-09mohonpeak/Kconfig: Fix whitespace issuesMartin Roth
Auto-indent did me wrong, and I didn't notice it. Change-Id: I5a736cf53a3bdbe57b28b2d6a55befd341d8dfd8 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12655 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2015-12-08intel/strago: Remove CONFIG_ from CONFIG_GOP_SUPPORT inside KconfigMartin Roth
The CONFIG_ is only used for Kconfig symbols outside of Kconfig. If used inside Kconfig, you'd end up with CONFIG_CONFIG_GOP_SUPPORT when it was used in the C code. Change-Id: I572323ef08fdd937d33ded1c27a418b3ad856147 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12664 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-12-08intel/littleplains: Update with recent changes to mohonpeakMartin Roth
- Change SEABIOS_MALLOC_UPPERMEMORY to using PAYLOAD_CONFIGFILE. - Add saved seabios .config with CONFIG_MALLOC_UPPERMEMORY unset. - Remove fixed microcode location. Change-Id: I8b723edf6d6b5542f118e9e0e1aee8104d9cde86 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12635 Tested-by: build bot (Jenkins) Reviewed-by: David Guckian <david.guckian@intel.com>
2015-12-06intel/fsp_rangeley: change non-existent config options to #definesMartin Roth
Kconfig symbols CONFIG_ACPI_INCLUDE_PMIO and CONFIG_ACPI_INCLUDE_GPIO were never added to the coreboot codebase when the Rangeley code was brought in from Sage. These symbols disabled ACPI code that was unused because it caused dmesg warnings due to conflicts with drivers trying to claim the same addresses as the ACPI code. Because it could be used on some other platforms, it was left in instead of being completely removed. - Change the Kconfig symbol names to simple #defines in the mainboard code. - Add the #defines along with comments to the reference platform. - Hook everything together in dsdt.asl - Update new mainboard littleplains the same way. Change-Id: I1f62157c6e447ea9b7207699572930e4711fc3e0 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12552 Reviewed-by: David Guckian <david.guckian@intel.com> Tested-by: build bot (Jenkins)
2015-12-06Rangeley: Change A, A, A, A INT routing to A, A, A, BMartin Roth
Devices that have their interrupt routing set to A, A, A, A don't get any interrupt values assigned because that series evaluates to 0. The code that sets the interrupt values checks to make sure a value is set by verifying that it's not 0. On Bay Trail, these are all single-function graphics devices, so by changing one of the unused interrupt lines from A to any other value, it assigns the values correctly. This issue did not affect ACPI interrupt routing. This is just a workaround, and the root issue still needs to be fixed. Change-Id: I4e6fe56084cbe86b309da15d61b296f1936458ec Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12630 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-06fsp_baytrail: Change A, A, A, A IRQ routing to A, A, A, BMartin Roth
Devices that have their interrupt routing set to A, A, A, A don't get any interrupt values assigned because that series evaluates to 0. The code that sets the interrupt values checks to make sure a value is set by verifying that it's not 0. On Bay Trail, these are all single-function graphics devices, so by changing one of the unused interrupt lines from A to any other value, it assigns the values correctly. This issue did not affect ACPI interrupt routing. This is just a workaround, and the root issue still needs to be fixed. Change-Id: I78866e3e0079435037e457a4fb04979254b56ee2 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12629 Tested-by: build bot (Jenkins) Reviewed-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-06intel/eagleheights: Fix IASL warningsMartin Roth
The eagleheights platform had 3 warnings: The SIO device needs an _ADR object to specify the address in addition to the operating region. Not all the paths through the _OSC method returned a value. According to the ACPI spec (5.0 & 6.0), bit 2 needs to be set for an unrecognized GUID. dsdt.aml 341: Device(SIO) { Warning 3141 - ^ Missing dependency (Device object requires a _HID or _ADR in same scope) dsdt.aml 140: Method (_OSC, 4) Warning 3115 - ^ Not all control paths return a value (_OSC) dsdt.aml 140: Method (_OSC, 4) Warning 3107 - ^ Reserved method must return a value (Buffer required for _OSC) - Remove Kconfig default disabling IASL warnings as errors. Change-Id: Iab52f19b96468e142b06430d99ba1d9f367d126e Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12522 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-04intel/minnowmax: Fix IRQ connection for legacy uart at 0x3f8Michael Tasche
The E38xx legacy uart fires IRQ4, not IRQ3. PCI based IRQ A is switched from IRQ4 to IRQ3, to get a working IRQ for the legacy uart. Change-Id: Ibc8e824c92bf1b9a92594ddc5d8a06726c9f1744 Signed-off-by: Michael Tasche <michael.tasche@esd.eu> Reviewed-on: https://review.coreboot.org/12622 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2015-12-03intel/mohonpeak: Change SEABIOS_MALLOC_UPPERMEMORY to config_seabiosMartin Roth
Instead of the SEABIOS_MALLOC_UPPERMEMORY option, use a saved SeaBIOS .config file to do the same thing. Change-Id: I29110a382b7770329ef938876426e571fbbbb339 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12569 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-20 12:36:00 +0000