| Age | Commit message (Collapse) | Author |
|---|
|
Introduce new config MTL_CHROME_EC_SHARED_SPI, tailored for
Chrome ECs utilizing an external shared SPI flash.
BUG=b:289783489
TEST=emerge-rex coreboot chromeos-bootimage is successful
Cq-Depend: chrome-internal:6691498
Cq-Depend: chrome-internal:6741356
Change-Id: I462c34c5adaefa37c652de293152243c58bad7c5
Signed-off-by: Deepti Deshatty <deepti.deshatty@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79824
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Chrome EC configuration options that are common among
various boards have been consolidated under the
"BOARD_EXT_EC_SPECIFIC_OPTIONS" config.
BUG=b:289783489
TEST=emerge-rex coreboot chromeos-bootimage is successful
Change-Id: I0b85cc48d5cefadb52edbb27bf6cf370b27c395f
Signed-off-by: Deepti Deshatty <deepti.deshatty@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79211
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This patch introduces the 512KB SI_EC FMAP region for storing the EC
firmware, a necessary addition to support EC chips without internal
flash memory.
As a testing platform, the MTLRVP Chrome SKU is utilized in conjunction
with the Microchip EC1723, and the changes are verified.
Cq-Depend: chrome-internal:6691498
Cq-Depend: chrome-internal:6741356
BUG=b:289783489
TEST=build "emerge-rex coreboot chromeos-bootimage" is successful.
changes are verified.
EC Log:
23-11-06 17:46:49.564 --- UART initialized after reboot ---
23-11-06 17:46:49.564 [Image: RO, mtlrvpp_m1723_v3.5.142816-ec:6596a3,
os:f660f7,cmsis:42cf18,picolibc:6669e4]
23-11-06 17:46:54.609 D: Power state: S5 --> S5S4
23-11-06 17:46:54.620 D: Power state: S5S4 --> S4
23-11-06 17:46:54.620 D: Power state: S4 --> S4S3
23-11-06 17:46:54.642 I: power state 10 = S3S0, in 0x0087
23-11-06 17:46:54.642 ec:~>: Power state: S3S0 --> S0
Change-Id: I788dbeaad05e5d6904fb2c7c681a0bf653dc7d84
Signed-off-by: Deepti Deshatty <deepti.deshatty@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79209
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the references from the chipset devicetree as this makes the
comments superfluous and remove devices which are turned off.
Built all variants with BUILD_TIMELESS=1 and the resulting binaries
remain the same.
Change-Id: I1fd5f2a1c8adb5f379d7f3d0b54dca9c3ee6e2b3
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Signed-off-by: Marvin Evers <marvin.evers@stud.hs-bochum.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79325
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
This patch enables the `SOC_INTEL_COMMON_BASECODE_RAMTOP` config
option for select mainboards, as not all board variants may want to
enable this config due to underlying SoC dependencies.
Mainboards that attempt to enable early caching have exhibited soft
hangs while switching between pre-RAM and post-RAM phases. This patch
allows mainboards to choose to enable this option without enabling
it by default (which could cause boot hangs).
Furthermore, it reorganizes the configuration options under
BOARD_GOOGLE_BASEBOARD_REX in alphabetical order for better readability.
BUG=b:306677879
TEST=Enable SOC_INTEL_COMMON_BASECODE_RAMTOP for google/rex and
intel/mtlrvp.
Change-Id: If380c2ecbee4f6437c3d58bfb55be076a4902997
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79048
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This patch creates a new variant mtlrvp4es_p_ext_ec. The new
variant will support ESx samples. The existing mtlrvp_p_ext_ec
variant will support the QS samples.
BUG=b:310775573
TEST= Build and boot mtlrvp4es_p_ext_ec.
Signed-off-by: Usha P <usha.p@intel.com>
Change-Id: Iad72c0f6343af149d16d8b1f8639ba496f6aab0c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79052
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Use the references from the chipset devicetree as this makes the
comments superfluous and remove devices which are turned off.
Change-Id: I413a3630bda841ae9ed6c4a584d2250a81c28308
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79039
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Use the references from the chipset devicetree as this makes the
comments superfluous and remove devices which are turned off.
Change-Id: Ic4043828baf43d14f7f2060fa3946e3a9e2008fc
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79038
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Boards without HAVE_SPD_IN_CBFS: Move SPD mapping into devicetree.
Boards with HAVE_SPD_IN_CBFS: Convert to Haswell-style SPD mapping.
Change-Id: Id6ac0a36b2fc0b9686f6e875dd020ae8dba72a72
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76967
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
There is no enumerate_buses() today and also no trace of it in our
repository. Also, in current terms, mainboard_enable() is called
as the very first thing in our enumeration so the comment seems
misleading.
Change-Id: Iae620f83c8166c1cfc8b9fb9ef4a7025987bf1be
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79003
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Currently, there are 3 separate settings for DPTF which are not always
in sync:
- the enabled/disabled state of the devicetree PCI device
- the 'dptf_enable' register, which sets the ACPI device status via GNVS
- the 'DptfDisable' register, which sets the FSP UPD of the same name
To make things sane, drop the two chip registers, and set the GNVS
variable and FSP UPD based on the enabled/disabled status of the DPTF
PCI device in the mainboard's devicetree.
TEST=build/boot google/cyan (edgar). Verify that the PCI and ACPI
devices are present/enabled when DPTF is enabled in devicetree, and not
present/disabled when disabled in devicetree.
Change-Id: I8fc1b63eda0dc2e047d9cb1e11a02d41ab8b2ad7
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78743
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
This patch adds the required FMD changes to support the change
in cse_lite 'commit Ie0266e50463926b8d377825 ("remove
cbfs_unverified_area_map() API in cse_lite")' for CBFS verification.
With the change in cse_lite the ME_RW_A/B blobs are now part of
FW_MAIN_A/B and corresponding entries in FMD can be removed for boards
that currently use them.
BUG=b:284382452
Signed-off-by: Anil Kumar <anil.kumar.k@intel.com>
Change-Id: I3ca88fee181f059852923d50292b24c0e5b9fd6d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78502
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
In order to improve the readability of the settings, use a comma
separated list to assign values to their indexes instead of repeating
the option name for each index.
Don't convert the settings for PCIe root ports as they will be moved
into the devicetree to their related root ports at some later point.
While on it, remove superfluous comments related to modified lines.
Change-Id: I769233a5baabbea920c9085f8008071ba34bb9dd
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78598
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It's not needed to put a backslash at the end of a line for quoted
multiline values. Thus, remove it.
Change-Id: I1b83d53598ba2adeed853a96d6c2c1a21f01a9f7
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78576
Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
For Sandy Bridge boards with MRC raminit support, migrate as much
MRC settings to devicetree as possible, to stop mainboard code from
needlessly overwriting entire PEI data structure, so they will not
interfere with upcoming transition to one standard Haswell way of
providing SPD info to northbridge.
Some exceptions allowed are described below and in code comments.
SPD-related items are kept out of devicetree for now. They will be
migrated (with a different representation) with the Haswell SPD
transition.
google/{butterfly,link,parrot,stout} have max DDR3 frequency set in
pei_data to 1600 (2*800), but in devicetree to 666. The reason for the
difference seems to be problems with native raminit code. These are
converted into ternaries tied to CONFIG_USE_NATIVE_RAMINIT, with an
added "fix me" tag. asus/p8x7x-series also needs the same treatment,
based on testing various memory on p8z77-m hardware.
TEST=Builds on all affected boards. asus/p8z77-m still works with multiple RAM modules tested.
Change-Id: Ie349a8f400eecca3cdbc196ea0790aebe0549e39
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76962
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Package C-state auto demotion feature allows hardware to determine lower
C-state as per platform policy. Since platform sets performance policy
to balanced from hardware, auto demotion can be disabled without
performance impact.
Also, disabling this feature results soc to enter below PC8 state and
additional power savings ~30mW in Local-Video-Playback scenario.
Change-Id: I6ff408280178a24686180f72f79522d2741607a1
Signed-off-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78278
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Selects should be done in the Kconfig file instead of Kconfig.name and
not mixed over both files.
Change-Id: I817faab0438a35d2e8859342e7c2b2dbaa0afeeb
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78129
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Selects should be done in the Kconfig file instead of Kconfig.name and
not mixed over both files.
Change-Id: If6b666478e15a8e843b50b60be490593349240bd
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78132
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Rather than disabling C State demotions for every single Raptor
Lake board due to an issue with S0ix, regardless of if they even
use S0ix, configure it in the mainboard.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I4f941a549bc717ae2f8ec961ead7ac7668347c99
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77087
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
The tree contains engineering sample boards, that ship with
pre-production Meteor Lake SoC. These boards are not sold.
BUG=b:300652989
TEST=Ensure mainboards like google/rex4es and screebo4es have
`SOC_INTEL_METEORLAKE_PRE_PRODUCTION_SILICON` config enabled.
Change-Id: I1a875a0f1d2c38582f35250ebe645e53599f62de
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77992
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
|
|
With commit b7832de0260b042c25bf8f53abcb32e20a29ae9c ("x86: Add .data
section support for pre-memory stages"), the `ENV_HAS_DATA_SECTION'
flag and its derivatives can now be removed from the code.
Change-Id: Ic0afac76264a9bd4a9c93ca35c90bd84e9b747a2
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77291
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
C1-state auto demotion feature allows hardware to determine C1-state
as per platform policy. Since platform sets performance policy to
balanced from hardware, auto demotion can be disabled without
performance impact.
Also, disabling this feature results soc to enter PC2 and lower
state in camera preview case and save platform power.
Note: C1 demotion heuristics used EPB parameter to balance between power
and performance, i.e. low threshold when EPB is low in-order to get C1
demotion faster and vice-versa. ChromeOS operates at default EPB=0x7
(low EPB) in both AC/DC, so in DC mode it gets more C1 demotion hits
than expected (similar to AC mode) and losing power respectively.
ref. https://review.coreboot.org/c/coreboot/+/76827
BUG=b:286328295
TEST=Code compiles and correct value of c1-state auto demotion is
passed to FSP. Also verified PC residency improvement ~10% in
camera preview case.
Change-Id: I1b2db634176f0072c535608c5600846a9086fef1
Signed-off-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77067
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Change-Id: Ic7d51037d527f95e8664ad04e328fc27901cacde
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71993
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I8a04068dd986f2d5dbebecd0bff08cc0189a34d6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74605
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Change the order of enabling EC and GPE wake sources, so it comes more
obvious we can use existing chromeec handlers without changes.
Change-Id: I5a10afa2b816dc8c01074be68a63114ee027c1e2
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74604
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Early Chromebook generations stored the information about
USB port power control for S3/S5 sleepstates in GNVS, although
the configuration is static.
Reduce code duplication and react to ACPI S4 as if it was ACPI
S5 request.
Change-Id: I7e6f37a023b0e9317dcf0355dfa70e28d51cdad9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74524
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
TESTED=On Intel AC, after seleting DISPLAY_UPD_IIO_DATA to compare
IIO UPD data are expected. lspci -vvv result is also normal.
Change-Id: Icfc2a22cb2e1f95be6bfc1d712e620e19a23ce27
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76343
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
To help identify the licenses of the various files contained in the
coreboot source, we've added SPDX headers to the top of all of the
.c and .h files. This extends that practice to Makefiles.
Any file in the coreboot project without a specific license is bound
to the license of the overall coreboot project, GPL Version 2.
This patch adds the GPL V2 license identifier to the top of all
makefiles in the mainboard directory that don't already have an SPDX
license line at the top.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ic451e68b1ad9ccdf34484dd98bd7fca7e177ef22
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68982
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
This patch enables PCH to CPU energy report feature which can be used
by Intel Telemetry Driver.
BUG=b:269563588
TEST=Able to build and boot google/rex and perform below check to ensure
the energy reporting is correct
w/o this cl:
# lspci -s 00:14.2 -vvv | grep "Region 0"
Region 0: Memory at 957f8000 (64-bit, non-prefetchable) [size=16K]
# iotools mmio_read32 0x957f8068 #i.e., 104th offset
0xXXXX0000
w/ this cl:
#lspci -s 00:14.2 -vvv | grep "Region 0"
Region 0: Memory at 957f8000 (64-bit, non-prefetchable) [size=16K]
# iotools mmio_read32 0x957f8068 #i.e., 104th offset
0xXXXXfc004
Change-Id: I9bd4625ea311a05071878aaec68433a1ba018c0d
Signed-off-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76353
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
CPUID is the same for Alder Lake and Raptor Lake S and HX variants.
To reduce the confusion and concerns how to name the macros, remove
the suffixes from macros and platform reporting strings. Thankfully
the stepping names are unique across mobile (P suffixed) and desktop
(S and HX suffixed) SKUs. Distinguishing the S from HX is possible via
host bridge PCI ID.
Change-Id: Ib08fb0923481541dd6f358cf60da44d90bd75ae2
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76203
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
|
|
Add JSL SKUs ID and add PLx from JSL PDG in project devicetree.
BUG=b:281479111
TEST=emerge-dedede coreboot and read correct value on dibbi
Signed-off-by: Chia-Ling Hou <chia-ling.hou@intel.com>
Change-Id: Ic086e32a2692f4f5f9b661585b216fa207fc56fd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75679
Reviewed-by: Super Ni <super.ni@intel.corp-partner.google.com>
Reviewed-by: Super Ni <super.ni@intel.com>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Rename shared SRAM aliases for IOE and PMC to make them more readable.
pci device 13.3 is IOE shared sram, renamed to ioe_shared_sram.
pci device 14.2 is PMC shared sram, renamed to pmc_shared_sram.
Rename them in SOC code as well as mainboard to make sure the patch
builds for the relevant boards.
BUG=b:262501347
TEST=Able to build.
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Change-Id: I02a8cacc075f396549703d7a008382e76258f865
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75999
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds the initial code for adlrvp_rpl variant board
which includes
1. Add overridetree.cb to corresponding variant directory
2. Update mainboard name in Kconfig and Kconfig.name
3. Add config option to select corresponding overridetree.cb
BUG=b:286030718
BRANCH=firmware-brya-14505.B
TEST=Able to build with the patch and boot the adlrvp_rpl platform
to ChromeOS on Windows SKU.
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: Ifb95ff705189863d23894769ff450f9528e73b14
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73962
Reviewed-by: Usha P <usha.p@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
This patch renames config `SOC_INTEL_METEORLAKE_U_P` to
`SOC_INTEL_METEORLAKE_U_H` as per Intel Meteor Lake Processor EDS
version 1.3.1 (doc number: 640228).
With new branding, the MTL-U/H-Processor Line offered in a 1-chip platform that includes the Compute, SOC, GT, and IOE tile on the
same package.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I032be650bbfef0bf0ef86bb37417b1d854303501
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75931
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
|
|
acpi timer needs to be disabled for xtal shutdown, requirement for platform
to enter deepest sleep state (s0i2.2).
BUG=b:274744845
TEST=Able to boot and verify S0ix is working
w/o this cl:
> iotools mmio_read32 0xfe0018fc
0x0
> iotools mmio_read32 0xfe4018fc
0x0
w/ this cl:
> iotools mmio_read32 0xfe0018fc
0x2
> iotools mmio_read32 0xfe4018fc
0x2
Change-Id: Ib87b7555217b6954fca98f95b86d03016cd9b783
Signed-off-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75898
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TCSS and TBT use the same lane on schematic. Update the port start
from 0 to match the Intel schematic. You can better follow the it
without convert the port number.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: Ic6631dcbbd9f6c79c756b015425e2da778eb395e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75892
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add support of variant_devtree_update() function to override
devtree settings for variant boards. Also, add CPU power limit
values for mtlrvp baseboard.
BRANCH=None
BUG=None
TEST=Built the changes
Change-Id: I11bc17f25d4880562d016e29f81e37e068bb6757
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75730
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Intel/MTLRVP is built with Intel Meteor Lake-U SoC, so select it.
Currently, there is no functional difference, but in the future FSP
UPD parameters can be overridden properly.
BUG=b:276697173
TEST=Able to build and boot intel/mtlrvp.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I8b1dec47ef9d12ac50317b86c4f0bc5fbe4e4dc3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75607
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
For a unification of the naming convension, change from pascal case to
snake case style for parameter 'SataPortsEnable'.
Change-Id: I0df35125360eb42a03d5445011d72842cb2b8d7e
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75553
Reviewed-by: Himanshu Sahdev <himanshu.sahdev@intel.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
|
|
"extern" is automatically implied with function declaration.
Change-Id: Ic40218acab5a009621b6882faacfcac800aaf0b9
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71890
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Override the weak function mainboard_ewl_check() and select OCP_EWL.
Select IPMI_KCS_ROMSTAGE and IPMI_OCP for OCP IPMI commands which are
needed for OCP EWL driver, but they are Meta-specific BMC commands
and don't really work for AC, this change is just for a demonstration
with AC.
Note that FSP UPD promoteWarnings needs to be disabled so that
FSP won't block and can return to coreboot for EWL processing
when memory EWL type 3 error occurs.
Tested=On Intel AC, connected with a faulty DIMM can see
EWL type 3 error being generated and halted with coreboot log:
[DEBUG] Number of EWL entries 3
[ERROR] EWL type: 3 size:32 severity level:1
[ERROR] Major Warning Code = 0x29, Minor Warning Code = 0x04,
[ERROR] Major Checkpoint: 0xb7
[ERROR] Minor Checkpoint: 0x74
[ERROR] Socket 0
[ERROR] Channel 4
[ERROR] Dimm 0
[ERROR] Rank 0
[ERROR] IPMI: ipmi_get_board_config command failed (ret=3 resp=0xc1)
[DEBUG] ipmi send memory training error
[DEBUG] EWL type: 1 size:19 severity level:1
[DEBUG] 0x6392e968: 01 00 00 00 13 00 01 00 00 00 b7 74 0a 03 00 04
[DEBUG] 0x6392e978: 00 00 00
[DEBUG] EWL type: 1 size:19 severity level:1
[DEBUG] 0x6392e97b: 01 00 00 00 13 00 01 00 00 00 b7 74 0a 03 00 04
[DEBUG] 0x6392e98b: 00 00 01
[EMERG] Memory Training Error!
Change-Id: I4602ae356aa6e55ed0611b8ac9a206db127c297c
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75151
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
As announced in the 4.20 release notes, support for the Intel Galileo
mainboard is moved to the 4.20 branch and dropped from master.
Change-Id: I132adf2782721738c954252665fdcd7bb8e1a1cd
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63284
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: ron minnich <rminnich@gmail.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Change-Id: I4d34e5c094440dad4a6ab9adc67d3da6b71ac2bf
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74514
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Change-Id: If4b7c2b94e0fec84831740336ccdbea0922ffbfe
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74513
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Change-Id: I0ada381883aa65d36434486dcce6b2331599e5c3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74861
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The patch orders MTL RVP board Kconfigs alphabetically.
TEST=Build the code for mtlrvp
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: Ib8557aab2848a384fba5203e5f3d62407b2566ef
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74838
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Himanshu Sahdev <himanshu.sahdev@intel.com>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
|
|
There is no platform-level implementation for USB port power management
in various sleepstates. The mainboards changed here never evaluate the
set GNVS variables S3U0, S3U1, S5U0 and S5U1 in ASL or in their SMI
handlers.
Change-Id: Ia1bc5969804a7346caac4ae93336efd9f0240c87
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74858
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com>
|
|
This adds RTD3 RPMX mutex to the root port. It is shared between RTD3
and WWAN. The purpose of using this mutex is to prevent OSPM from
calling _ON and _OFF methods while WWAN kernel driver is calling _RST,
which accesses the GPIO pins.
BUG=NA
TEST=boot to OS and check the generated SSDT table for the root port.
The RPMX mutex should be generated under the root port.
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: I5b53765453bac0fc96e9651ab347069c7c8bf058
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73384
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
This adds RTD3 RPMX mutex to the root port. It is shared between RTD3
and WWAN. The purpose of using this mutex is to prevent OSPM from
calling _ON and _OFF methods while WWAN kernel driver is calling _RST,
which accesses the GPIO pins.
BUG=NA
BRANCH=firmware-brya-14505.B
TEST=boot to OS and check the generated SSDT table for the root port.
The RPMX mutex should be generated under the root port.
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: I809eb84cb1a09deb168040e83041b65237a1b576
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73383
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
|
|
Change-Id: Ie75ce1eee3179a623da812a6b76c7ec457684177
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74470
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Intel Archer City CRB is a dual socket CRB with Intel Sapphire Rapids
Scalable Processor chipset. The chipset also includes Emmitsburg PCH.
It was tested with LinuxBoot payload on both dual and single socket
configurations.
The multisocket support depends on Change-Id:
I4a593252bb7f68494f4ccce215ac9cf1eb19b190
Change-Id: Ic02634cd615e2245e394f10aad24b0430cf5cd17
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71968
Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This patch updates the MTLRVP debug flash layout to optimize WP_RO to 4MB.
Changes for chromeos.fmd:
SI_BIOS:
RW_SECTION_A/B: Increase to 7.5MB.
RW_LEGACY: Introduce with 1MB.
RW_MISC: Increased to 1MB.
RW_UNUSED: 2MB (reserved)
WP_RO: Reduce to 4MB
Additionally, ensure RW_SECTION_B region starts at 16MB boundary in the
SPI Flash.
BUG=b:277143384
TEST=Able to build and boot intel/mtlrvp with FSP release and debug image.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ie635e3cce1c3fd771e6a17e4b3c1bd700f4729bd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74254
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This patch updates the MTLRVP flash layout to optimize WP_RO to 4MB.
Changes for chromeos.fmd:
SI_BIOS:
RW_SECTION_A/B: Reduce to 7MB.
RW_LEGACY: Reduce to 1MB.
RW_MISC: Increased to 1MB.
RW_UNUSED: 3MB (reserved)
WP_RO: Reduce to 4MB
Additionally, ensure RW_SECTION_B region starts at 16MB boundary in the
SPI Flash.
BUG=b:277143384
TEST=Able to build and boot intel/mtlrvp with FSP release and debug image.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ibd1ea7a3a2cd21928b8e33473c7bdddfad17c636
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74252
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This change enables PCIe x1 slot. In addition, it turns off 3.3v and
12v power and assert PERST# when suspend and turn on the power and
deassert the PERST# when resume for the x1 slot.
NOTE: Kconfig flag and required GPIO pins are already configured.
- /soc/intel/meteorlake/Kconfig
select SOC_INTEL_COMMON_BLOCK_PCIE_RTD3
- gpio.c:
/* GPP_A18: X1_PCIE_SLOT3_PWR_EN */
PAD_CFG_GPO(GPP_A18, 1, DEEP),
/* GPP_A19: X1_DT_PCIE_RST_N */
/* SRCCLKREQ: GPP_C12: SRCCLKREQ3_GEN4_X1_DT_SLOT3_N */
PAD_CFG_NF(GPP_C12, NONE, DEEP, NF1),
BUG=b:224325352
BRANCH=None
TEST=Insert a SD card or NIC AIC on PCIe x1 slot and the AIC should
be detected and enabled at boot. For S0ix, run
'suspend_stress_test -c 1'. The RP6 should not cause any suspend and
resume issue.
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: Id2e92acf754569a22ea76a68c91aafce0075a742
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73054
Reviewed-by: Harsha B R <harsha.b.r@intel.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Usha P <usha.p@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This to fix following error using Clang-16.0.0:
/cb-build/coreboot-toolchain.0/clang/APPLE_IMAC52/mainboard/apple/macbook21/static.c:66:19: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion]
.c4onc3_enable = 1,
^
/cb-build/coreboot-toolchain.0/clang/APPLE_IMAC52/mainboard/apple/macbook21/static.c:75:32: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion]
.p_cnt_throttling_supported = 1,
^
Change-Id: I691b51a97b359655c406bff28ee6562636d11015
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73796
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
This patch renames debug FMD file (chromeos.debug-fsp.fmd) to
chromeos-debug-fsp.fmd in order to match the file path name in `FMDFILE`
config.
TEST=Able to build intel/mtlrvp with this code change.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ic8de07e4befa6b1ab8ab57d593c6939d87c48e9b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74217
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Usha P <usha.p@intel.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch updates the MTLRVP flash layout to allow CSE Lite FW
update and accommodate multiple ESx SoC stepping blobs.
SI_BIOS:
SI_EC: Removed
RW_SECTION_A/B: Increased by ~1.9MB.
RW_LEGACY: Reduce to 1MB.
RW_MISC: Reduce to 152KB.
- Drop RW_SPD_CACHE
- Optimize other sections
Additionally, moved RW_LEGACY under extended BIOS region.
For chromeos-debug-fsp.fmd
SI_BIOS:
RW_SECTION_A/B: Increased by ~1.2MB.
RW_LEGACY: Dropped
RW_MISC: Reduce to 152KB.
- Drop RW_SPD_CACHE
- Optimize other sections
BUG=b:271407315
TEST=Able to enable CSE update on MTLRVP and have free space
to add one more PUNIT FW to support different SoC stepping.
Signed-off-by: Usha P <usha.p@intel.com>
Change-Id: I8cfba861e6d3122b0795a5a8e589c67cebad9762
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73378
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com>
|
|
Debug FSP is ~920KiB larger than release FSP and we don't have
sufficient space for MTL-P RVP flash layout.
Remove RW_LEGACY and split them into RW_SECTION_A/B so we can have a
room for it.
BUG=b:271407315
TEST=Build intel/mtlrvp with CONFIG_BUILDING_WITH_DEBUG_FSP.
Change-Id: Ief7dd39af018c4c1519ca80d1303085d8298cda6
Signed-off-by: Usha P <usha.p@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74193
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com>
|
|
This is a new port for the Intel DQ67SW desktop board. It is
microATX-sized with an LGA1155 socket and four DIMM sockets for DDR3
SDRAM.
A list of tested working and non-working features is in the
documentation page.
Change-Id: Ifc703f2d0ad45495e71d3f7799347430f5196791
Signed-off-by: Michael Büchler <michael.buechler@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73087
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Of the 13 mainboards that implement mainboard_should_reset_usb() hook,
all but one do the same: Stop MRC from resetting USB when resuming
from S3 suspend.
This hook turns out is only here to facilitate a USB reset workaround
on samsung/stumpy for an old ChromeOS kernel which is no longer needed.
Drop the workaround, the hook, and headers no longer used.
roda/rv11/early_init.c is left with no useful code after this patch,
so drop it entirely from both bootblock and romstage.
Change-Id: Ib3a5a00c0a6b1528e39435784919223d16b3914e
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72496
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The ADL RVP has an i219 PHY connected to the PCH internal MAC.
Enable it to have working ethernet on the board.
Test:
Added GBE region and verified that the PCI device 00:1f.6 is working.
Change-Id: I2ca1af00ae4564a04f5388cd3734bb735d87352e
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73821
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch will add new board variant to enable MCHP1727 EC Card
for MTL-RVP
BUG=b:262800416
BRANCH=none
TEST=check if you can observe MEC EC option as part of make menuconfig.
Able to boot to ChromeOS with Microchip EC.
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: Ie0d3c37bcab5e4b90a131e17996c4b6dcbae7d5d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70668
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Reviewed-by: Usha P <usha.p@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Introduce at new config option CONFIG_FSP_PUBLISH_MBP_HOB to control
the creation of ME_BIOS_PAYLOAD_HOB (MBP HOB) by FSP.
This new option is hooked with `SkipMbpHob` UPD and is always disabled
for RPL & ADL-N based ChromeOS platforms.
It is not disabled for ADL-P based platforms because ADL-P FSP relies
on MBP HOB for ChipsetInit version for ChipsetInit sync. As ChipsetInit
sync doesn't occur if no MBP HOB, so it results S0ix issue. This
limitation is addressed in the later platforms so creation of MBP HOB
can be skipped for ADL-N and RPL based platforms.
This made skip_mbp_hob SOC chip config variable redundant which is also
removed as part of this change.
BUG=none
TEST=Build and boot to Google/Taniks.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Ia396b633a71aedf592c45b69063ee0528840fd2b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71996
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
MX98357A is not a soundwire codec, so move it out of
drivers/intel/soundwire node.
BUG=none
TEST=Build and boot MTL-P RVP to Chrome OS. Verify I2S audio card
enumeration and no max98357a entry under /sys/bus/soundwire/devices.
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Change-Id: I24fc7084ea18445c341eed012cfacde8de126fd8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73189
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Usha P <usha.p@intel.com>
|
|
Change-Id: I99ded00fa6dadb494c1523d00063dbc1fde95614
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73093
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I58a4e4fbd1a43462147daa58a5fda767cfd59c06
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72758
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Change-Id: Ib968fe7f9f95e8f690b46b868fd7d6f9332b4c9a
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72664
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Change-Id: I150a4ed94bcaead6eb45f1c4b4952ae6957e0940
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72663
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Change-Id: I7db69e2faf412b9c6732f6dfc362d5774094ef27
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72662
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Change-Id: I5eb1424e9e6c1fbf20cd0bf68fbb52e1ec97f905
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72661
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Fix RTD3 timing for adlrvp_p_ext_ec and adlrvp_rpl_ext_ec.
BUG=none
BRANCH=firmware-brya-14505.B
TEST=Insert a SD card or NIC AIC on PCIe slot1 and run
'suspend_stress_test -c 1'. The RP8 should not cause suspend issue.
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: I792c55a6361d1eae55cc6f668a03dc2503120fe1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72422
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add support for MTL-P RVP mipi camera functionality
BUG=None
TEST=Build and boot MTL-P RVP to Chrome OS. Verify SSDT entries
related to mipi camera and verify camera working.
Scope (\_SB.PCI0.I2C1)
{
Device (CAM0)
Scope (\_SB.PCI0.I2C0)
{
Device (CAM1)
Signed-off-by: Usha P <usha.p@intel.com>
Change-Id: I698edd7155fc38477f3416900799e61d3295fd1a
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73016
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Harsha B R <harsha.b.r@intel.com>
|
|
This patch adds FW_CONFIG and codec support for MTL-P RVP
BUG=None
TEST=Build and boot MTL-P RVP to Chrome OS. Verify audio codec listed
under aplay -l and audio working with the connected audio card.
localhost ~ # aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: sofrt5682 [sof-rt5682], device 0: Headset (*) []
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: sofrt5682 [sof-rt5682], device 1: Speakers (*) []
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: sofrt5682 [sof-rt5682], device 5: HDMI1 (*) []
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: sofrt5682 [sof-rt5682], device 6: HDMI2 (*) []
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: sofrt5682 [sof-rt5682], device 7: HDMI3 (*) []
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: sofrt5682 [sof-rt5682], device 8: HDMI4 (*) []
Subdevices: 1/1
Subdevice #0: subdevice #0
Signed-off-by: Usha P <usha.p@intel.com>
Change-Id: Ib29ac3e4105e578e1555076d180b35a8265a99c8
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73015
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch enables S0ix for MTL-P RVP platform
BUG=None
TEST=Able to enter low power idle S0 on MTL-P RVP
Signed-off-by: Usha P <usha.p@intel.com>
Change-Id: Id84f21d81197e44d6dd0dd8888c80848aa3679e0
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71994
Reviewed-by: Meera Ravindranath <meera.ravindranath@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Harsha B R <harsha.b.r@intel.com>
Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com>
|
|
Enable DPTF functionality for Meteor Lake based mtlrvp board
BRANCH=None
BUG=None
TEST=Built and booted on mtlrvp board
Change-Id: I8d3e1cd43cf67c3f2081be339589a6da358b668c
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71098
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Remove the commented VBOOT_VBNV_CMOS Kconfig option as well as VBOOT for
emeraldlake2.
BUG=b:235293589
TEST=none
Change-Id: Ie583dcf615573784c657b9d220ad417b05704150
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72890
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch enables PCI Express Advanced Error Reporting Capability for
WWAN, WLAN, and SSD root ports. On enabling PCIE_RP_AER, PCIE device
will automatically report (if any error) about the error nature to the
corresponding PCIe root port.
BUG=b:224325352
BRANCH=None
TEST=Build and boot mtlrvp to ChromeOS.
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: Iab8619818e2219b41287b895513eb04b0464401e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72874
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
This patch adds ACPI configuration for USB2/3 ports for mtlrvp as per
schematics. This helps in generating corresponding ACPI code at runtime
that includes port information.
BUG=b:224325352
BRANCH=None
TEST=Able to build and boot MTLRVP. Connect USB device and check if
corresponding enumeration of USB device (14.0) is observed on executing
lspci.
00:14.0 USB controller: Intel Corporation Device 7e7d (rev 01)
00:14.1 USB controller: Intel Corporation Device 7e7e (rev 01)
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: Ie150247661322e3944be15dc70f66033266d8aac
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72787
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch describes BB retimer for tcss_dma0 and tcss_dma1 with respect
to GPP_B21 as per schematics.
+--------------+------------+
| tbt_pcie_rp0 | tcss_dma0 |
+--------------+------------+
| tbt_pcie_rp1 | tcss_dma0 |
+--------------+------------+
| tbt_pcie_rp2 | tcss_dma1 |
+--------------+------------+
| tbt_pcie_rp3 | tcss_dma1 |
+--------------+------------+
BUG=b:224325352
BRANCH=None
TEST=Able to build and boot MTLRVP to ChromeOS. Verify the enumeration
of tbt_pcie_rp as part of lspci.
00:07.0 PCI bridge: Intel Corporation Device 7ec4
00:07.1 PCI bridge: Intel Corporation Device 7ec5
00:07.2 PCI bridge: Intel Corporation Device 7ec6
00:07.3 PCI bridge: Intel Corporation Device 7ec7
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: Ie1a0026b064aa4f7fcd27e75c0b0d052ec620dcc
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72786
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch describes the TCSS USB ports for mtlrvp as per schematics.
This patch describes TCSS ports for UPC_TYPE_C_USB2_SS_SWITCH as below,
tcss_usb3_port1: USB3 Type-C Port C0
tcss_usb3_port2: USB3 Type-C Port C1
tcss_usb3_port3: USB3 Type-C Port C2
tcss_usb3_port4: USB3 Type-C Port C3
BUG=b:224325352
BRANCH=None
TEST=Able to build and boot MTLRVP to ChromeOS. Verify the enumeration
of xhci (0d.0) as part of lspci. Also verify the enumeration of Type-C
ports as part of cbmem -c.
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: I0054ac4e3d1d9b97cfea615831ec8f3d3e00c9e0
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72785
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch enables FM350GL 5G WWAN support for mtlrvp.
BUG=b:224325352
BRANCH=None
TEST=Build and boot mtlrvp to ChromeOS. Ensure that WWAN module 00:1c.6
is enumerated as part of lspci and cbmem -c in AP console. Also verify
generation of PXSX Device as part of SSDT. Able to connect WiFi and
access internet.
cbmem -c:
\_SB.PCI0.RP07: Enable RTD3 for PCI: 00:1c.6 (Intel PCIe Runtime D3)
\_SB.PCI0.RP07: Enable WWAN for PCI: 00:1c.6 (Fibocom FM-350-GL)
SSDT:
Scope (\_SB.PCI0.RP07)
{
Device (PXSX)
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: I870cc0782fb989f1bdbe369a4a12630a62729d8e
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72779
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
This patch enables GSPI [1] interface for mtlrvp based on mtlrvp
schematics.
BUG=b:224325352
BRANCH=None
TEST=Able to observe corresponding UPD configuration with FSP dump and
able to boot mtlrvp (LP5/DDR5) to ChromeOS. (Base patch for CB:71223)
SPI[0].Mode = 0
SPI[0].DefaultCsOutput = 0
SPI[0].CsMode = 0
SPI[0].CsState = 0
SPI[1].Mode = 1
SPI[1].DefaultCsOutput = 0
SPI[1].CsMode = 0
SPI[1].CsState = 0
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: I3d4c4f19dd80fefa80c365b5ecac0a234f5af860
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72706
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
This patch enables PCIe port for WLAN as per mtlrvp schematics
BUG=b:224325352
BRANCH=None
TEST=Build and boot mtlrvp to ChromeOS. Ensure that WLAN module gets
is enumerated as part of lspci in AP console.
ae:00.0 Wireless controller [0d40]: Intel Corporation XMM7360 LTE
Advanced Modem (rev 01)
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: Ief3c0eff40ced57d29ce343e569b6b392c27ad74
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72778
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch enables EC_GOOGLE_CHROMEEC_SWITCHES for MTL_CHROME_EC which
helps in mode switch using dut-control power_state:rec.
BUG=b:224325352
BRANCH=None
Test=Able to build and boot MTLRVP to ChromeOS. Check if chroot command
dut-control power_state:rec puts the DUT to recovery mode.
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: I5de0cd6c9a50bd85238205e09976a8bd8dd7142f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72813
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Usha P <usha.p@intel.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
This patch enables PCIe port for WWAN as per mtlrvp schematics
BUG=b:224325352
BRANCH=None
TEST=Build and boot mtlrvp to ChromeOS. Ensure that WWAN module
gets enumerated with cbmem -c.
\_SB.PCI0.RP07: Enable RTD3 for PCI: 00:1c.6 (Intel PCIe Runtime D3)
\_SB.PCI0.RP07: Enable WWAN for PCI: 00:1c.6 (Fibocom FM-350-GL)
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: Ib372db9642a3c7b3a21a112fa0e6e0b4bc88a9ea
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72777
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds ACPI support for Type-C ports.
BUG=b:224325352
BRANCH=None
Test=Able to build and boot MTLRVP. Verify SSDT for the corresponding
entry,
\_SB.PCI0.PMC.MUX.CON0 under Device (CON0)
\_SB.PCI0.PMC.MUX.CON1 under Device (CON1)
\_SB.PCI0.PMC.MUX.CON2 under Device (CON2)
\_SB.PCI0.PMC.MUX.CON3 under Device (CON3)
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: I8e5957ca7a6c542a64d79b2ceefbed79ead15811
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72789
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Usha P <usha.p@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
Found-by: linter
Change-Id: I7c6d0887a45fdb4b6de294770a7fdd5545a9479b
Signed-off-by: Alexander Goncharov <chat@joursoir.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72795
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds below chip configuration for I2C devices for mtlrvp.
+-----------+--------------------+-------------+
| INTERFACE | PCI Number (B:D:F) | DEVICE |
+-----------+--------------------+-------------+
| I2C0 | 0:0x15:0 | CAM1 |
+-----------+--------------------+-------------+
| I2C1 | 0:0x15:1 | CAM0 |
+-----------+--------------------+-------------+
| I2C2 | 0:0x15:2 | NC |
+-----------+--------------------+-------------+
| I2C3 | 0:0x15:3 | HID |
+-----------+--------------------+-------------+
| I2C4 | 0:0x15:4 | NC |
+-----------+--------------------+-------------+
| I2C5 | 0:0x15:5 | NC |
+-----------+--------------------+-------------+
BUG=b:224325352
BRANCH=None
TEST=Able to boot mtlrvp (LP5/DDR5) to ChromeOS. Also verify serial bus
enumeration through lspci.
00:15.0 Serial bus controller: Intel Corporation Device 7e78 (rev 01)
00:15.1 Serial bus controller: Intel Corporation Device 7e79 (rev 01)
00:15.3 Serial bus controller: Intel Corporation Device 7e7b (rev 01)
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: Ia5964472be902041f961187c0072a89055badd4f
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72647
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
This patch enables display configuration for mtlrvp. The change follows
mtlrvp schematics.
BUG=b:224325352
BRANCH=None
TEST=Able to observe corresponding UPD configuration with FSP dump.
Also verify display over eDP and HDMI.
DdiPortAConfig : 0x1
DdiPortBConfig : 0x0
DdiPortAHpd : 0x0
DdiPortBHpd : 0x1
DdiPortCHpd : 0x0
DdiPort1Hpd : 0x0
DdiPort2Hpd : 0x0
DdiPort3Hpd : 0x0
DdiPort4Hpd : 0x0
DdiPortADdc : 0x0
DdiPortBDdc : 0x1
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: I05bd7427d6a339ee200731a8dd448e85efc694e0
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72645
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
This patch removes the configuration of GPP_A12 for mtlrvp. Garfield
Peak (WLAN) doesn't use GPP_A12 for WAKE_N. Configuring GPP_A12 pin
prevents system entering G3 (reboots) on issuing shutdown -h now. Hence
configuring GPP_A12 as PAD_NC.
BUG=b:224325352
BRANCH=None
TEST=On issuing 'shutdown -h now' system enters G3
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: I5e46b8afd3e0055440fd3c3db4aa5a9f1d4aa556
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72742
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Usha P <usha.p@intel.com>
|
|
Removing default on/off from mainboard devicetrees is left as a follow-up.
Change-Id: I74c34a97ea4340fb11a0db422a48e1418221627e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69502
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
This patch enables CNVi_BT Core and Wifi for mtlrvp based on mtlrvp
schematics.
1. Enable CNVi BT Core in device tree
2. Enable CNVi Wifi (pci 14.3) device in device tree
BUG=b:224325352
BRANCH=None
TEST=Able to observe corresponding UPD configuration with FSP dump and
able to boot mtlrvp (LP5/DDR5) to ChromeOS.
CNVi Mode = 1
Wi-Fi Core = 1
BT Core = 1
BT Audio Offload = 0
BT Interface = 1
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: I22575bf31b540f9dc1149a2766268285001b72f4
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72695
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Change-Id: I7eaf625e5acfcefdae7c81e186de36b42c06ee67
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72704
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
This patch updates the print message to start with uppercase, 'board'
to 'Board'.
BUG=b:224325352
BRANCH=None
TEST=Able to observe proper print message when invalid board id is
configured.
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: Ie82df940cbd1eba9c5d485b48648c2bc8f234aae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72638
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Usha P <usha.p@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The parallel mp code picks up lapics at runtime, so remove it from all
devicetrees that use this codebase.
Change-Id: I5258a769c0f0ee4bbc4facc19737eed187b68c73
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69303
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This patch adds initial romstage code and spd data for LP5 memory
parts for MTL-RVP. This also configures memory based on the board id.
Memory - x32 LPDDR5
Vendor/Model - Micron/MT62F2G32D8DR-031 WT:B
Board ID -
0b0000 - Empty spd hex file
0b0001 - DDR5 (Empty spd hex file)
0b0010 - LPDDR5 (MT62F2G32D8DR-031 WT:B)
BUG=b:224325352
TEST=Able to boot intel/mtlrvp (LP5 SKU) to ChromeOS
Signed-off-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com>
Change-Id: I15b352eb246aed23da273e56490c7094eae9d176
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69741
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Drop the `hyper_threading` CMOS option from most boards, as it's most
likely not working properly and causing problems. The main reasons to
remove the option are:
* The used enum is backwards (0 ---> Enable, 1 ---> Disable)
* Platform/SoC code does not honor the `hyper_threading` option
Also, remove the now-unused enum used by the `hyper_threading` option.
Change-Id: Ia8980a951f4751bc2e1a5d0e88835f578259b256
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69523
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Change-Id: I7bd29bab2c77da2ffe86167d54e87c9941355ea7
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72075
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Intel Ice Lake is unmaintained and the only user of this platform ever
was the Intel CRB (Customer Reference Board). As it looks like, it was
never ready for production as only engineering sample CPUIDs are
supported.
As announced in the 4.19 release notes, remove support for Intel
Icelake code and move any maintenance on the 4.19 branch.
This affects the following components and their related code:
* Intel Ice Lake SoC
* Intel Ice Lake CRB mainboard
* Documentation
Change-Id: Ia796d4dc217bbcc3bbd9522809ccff5a46938094
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72008
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Exposing the GPIOs via an ACPI PowerResource and the _CRS results in the
OS driver and ACPI thinking they own the GPIO. This can cause timing
problems because it's not clear which system should be controlling the
GPIO.
Previously, we flagged as an error any device which set the
'has_power_resource' flag but did not set 'disable_gpio_export_in_crs.'
There's no reason to require explicit disablement however, so drop the
superfluous 'disable' flag, and change the _CRS generation to check if
the GPIOs will be exported via the 'has_power_resource' flag instead.
BUG=b:265055477
TEST=build/boot skyrim, dump SSDT and verify touchscreen GPIOs only
listed under PRx, not under _CRS.
Change-Id: I837ae6c6fe4b8e1c4e10686406cba06bdb7759d2
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71849
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
