| Age | Commit message (Collapse) | Author |
|---|
|
Instead of duplicating code across multiple mainboards, use newly
added helper function to read boardid from Chrome EC.
Change-Id: I1671c0a0b87d0c4c45da5340e8f17a4a798317ca
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/21682
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
There have been discussions about removing this since it does not seem
to be used much and only creates troubles for boards without defaults,
not to mention that it was configurable on many boards that do not
even feature uart.
It is still possible to configure the baudrate through the Kconfig
option.
Change-Id: I71698d9b188eeac73670b18b757dff5fcea0df41
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/19682
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This patch to provide new config options to perform LPC and SPI
lock down either by FSP or coreboot.
Remove EISS bit programming as well.
TEST=Build and boot Eve and Poppy.
Change-Id: If174915b4d0c581f36b54b2b8cd970a93c6454bc
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/21068
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The Chrome EC event for "thermal overload" was never implemented and
is being repurposed as the EC event mask is out of free bits.
Remove this from the boards that were enabling it.
BUG=b:36024430
TEST=build coreboot for affected boards
Change-Id: I6038389ad73cef8a57aec5041bbb9dea98ed2b6e
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/20424
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Remove MONOTONIC_TIMER_MSR selection from mainboard
Konfigs, as it only does a reduntant selection of
HAVE_MONOTONIC_TIMER config, already selected under
skylake soc Kconfig.
Change-Id: Ib3177ceb9e8b6c16ce0e437a4a02b94f215af58f
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/20002
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
|
|
TPM ACPI entries are automatically generated, and the old static
TPM ASL file is obsolete. Remove the reference to this obsolete
static and empty ASL file.
Delete src/drivers/pc80/tpm/acpi/tpm.asl.
Change-Id: I6163e6d59c53117ecbbbb0a6838101abb468de36
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/19291
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Currently when enabling Deep S3 or Deep S5 it unconditionally gets enabled
in both DC and AC states. However since using Deep S3 disables some
expected features like wake-on-USB it is not always desired to enable the
same state in both modes.
To address this split the setting and add a separate config for Deep Sx in
AC and DC states.
All motherboards that set this config were updated, but there is no actual
change in behavior in this commit.
BUG=b:36723679
BRANCH=none
TEST=This commit has no runtime visible changes, I verified on Eve that the
Deep SX config registers are unchanged, and it compiles for all affected boards.
Change-Id: I590f145847785b5a7687f235304e988888fcea8a
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/19239
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This patch attempts to finish the separation between CONFIG_VBOOT and
CONFIG_CHROMEOS by moving the remaining options and code (including
image generation code for things like FWID and GBB flags, which are
intrinsic to vboot itself) from src/vendorcode/google/chromeos to
src/vboot. Also taking this opportunity to namespace all VBOOT Kconfig
options, and clean up menuconfig visibility for them (i.e. some options
were visible even though they were tied to the hardware while others
were invisible even though it might make sense to change them).
CQ-DEPEND=CL:459088
Change-Id: I3e2e31150ebf5a96b6fe507ebeb53a41ecf88122
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/18984
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The virtualized developer switch was invented five years ago and has
been used on every vboot system ever since. We shouldn't need to specify
it again and again for every new board. This patch flips the Kconfig
logic around and replaces CONFIG_VIRTUAL_DEV_SWITCH with
CONFIG_PHYSICAL_DEV_SWITCH, so that only a few ancient boards need to
set it and it fits better with CONFIG_PHYSICAL_REC_SWITCH. (Also set the
latter for Lumpy which seems to have been omitted incorrectly, and hide
it from menuconfig since it's a hardware parameter that shouldn't be
configurable.)
Since almost all our developer switches are virtual, it doesn't make
sense for every board to pass a non-existent or non-functional developer
mode switch in the coreboot tables, so let's get rid of that. It's also
dangerously confusing for many boards to define a get_developer_mode()
function that reads an actual pin (often from a debug header) which will
not be honored by coreboot because CONFIG_PHYSICAL_DEV_SWITCH isn't set.
Therefore, this patch removes all those non-functional instances of that
function. In the future, either the board has a physical dev switch and
must define it, or it doesn't and must not.
In a similar sense (and since I'm touching so many board configs
anyway), it's annoying that we have to keep selecting EC_SOFTWARE_SYNC.
Instead, it should just be assumed by default whenever a Chrome EC is
present in the system. This way, it can also still be overridden by
menuconfig.
CQ-DEPEND=CL:459701
Change-Id: If9cbaa7df530580a97f00ef238e3d9a8a86a4a7f
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/18980
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Instead of defining a separate LID device for mainboards using
chromeec, define EC_ENABLE_LID_SWITCH for these boards.
Change-Id: Iac58847c2055fa27c19d02b2dbda6813d6dec3ec
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/18964
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This is done to avoid any conflicts with same IRQ enums defined by other
drivers.
BUG=None
BRANCH=None
TEST=Compiles successfully
Change-Id: I539831d853286ca45f6c36c3812a6fa9602df24c
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/18444
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change config option selection from "config xyz default y" to "select
xyz" if the config option has no dependencies.
BUG=None
BRANCH=None
TEST=Verified that config option selection remains unchanged.
Change-Id: I259ae40623b7f4d5589e2caa0988419ba4fefda4
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/18400
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
These headers & comments indicating a lack of functionality don't help
anything. We discourage copyrights and licenses on empty files, so
just clear these.
Change-Id: Id2ab060a2726cac6ab047d49a6e6b153f52ffe6d
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17657
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
In the ACPI header there's an OEM revision field that was previously
just being implicitly set to 0. Allow for a board to provide a
non-zero value for this field.
Change-Id: Icd40c1c162c2645b3990a6f3361c592706251f82
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17650
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Program USB Overcurrent pins as per board schematics definition.
BUG=none
BRANCH=none
TEST=Build and boot kunimitsu from USB device.
Change-Id: I6aeb65953c753e09ad639469de7d866a54f42f11
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/17570
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Make MMCONF_SUPPORT selected with MMCONF_SUPPORT_DEFAULT.
Platforms that remain to have explicit MMCONF_SUPPORT are
ones that should be converted.
Change-Id: Iba8824f46842607fb1508aa7d057f8cbf1cd6397
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17527
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Instead of defining the same functions for reading/clearing boot-mode
switches from EC in every mainboard, add a common infrastructure to
enable common functions for handling boot-mode switches if
GOOGLE_CHROMEEC is being used.
Only boards that were not moved to this new infrastructure are those
that do not use GOOGLE_CHROMEEC or which rely on some mainboard specific
mechanism for reading boot-mode switches.
BUG=None
BRANCH=None
TEST=abuild compiles all boards successfully with and without ChromeOS
option.
Change-Id: I267aadea9e616464563df04b51a668b877f0d578
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17449
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
In preparation of merging the lpss i2c config structures on
apollolake and skylake move the i2c voltage variable to its
own field. It makes refactoring things easier, and then there's
no reason for a separate SoC specific i2c config structure.
BUG=chrome-os-partner:58889
Change-Id: Ibcc3cba9bac3b5779351b673bc0cc7671d127f24
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17347
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
After tuning the temperature values for optimal performance,
this patch updates few DPTF settings for Kunimitsu board.
BUG=None
BRANCH=None
TEST=Built and booted on Kunimitsu boards. Verified these
updated DPTF settings with different workloads.
Change-Id: Ic1c319262d80cc5cb29a8630af213822308f8bed
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/350223
Reviewed-on: https://review.coreboot.org/17069
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch updates the _ART table with other external sensor
TSR0 for Fan speed control on Skylake-U based Kunimitsu and
Lars boards.
Also, updates the temperature values in DPTF policy for
better performance.
BUG=chrome-os-partner:51025
BRANCH=firmware-glados-7820.B
TEST=Built and booted on kunimitsu and lars EVT boards.
Verified this updated _ART table on these boards with
different workloads.
Change-Id: Ib195910c5eb00e004e8b9bd50e266ade3c175be2
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/332349
Reviewed-on: https://review.coreboot.org/17066
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Remove the FADT from the individual mainboards and select and
use COMMON_FADT in the SOC instead. Set the ACPI revision to 5.
Change-Id: Ieb87c467c71bc125f80c7d941486c2fbc9cd4020
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/17138
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add choice to select between FSP 1.1 & FSP2.0 driver to be used.
Change-Id: Ied7eab6f4a2191e0bcf220cde5ca519a3c3e2d76
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/17051
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Instead of hard-coding the polarity of the GPIO to active high/low,
accept it as a parameter in devicetree. This polarity can then be used
while calling into acpi_dp_add_gpio to determine the active low status
correctly.
BUG=chrome-os-partner:55988
BRANCH=None
TEST=Verified that correct polarity is set for reset-gpio on reef.
Change-Id: I4aba4bb8bd61799962deaaa11307c0c5be112919
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/16877
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Add a header file to provide common declarations that the
mainboards can use regarding EC init.
BUG=chrome-os-partner:56677
Change-Id: Iaa0b37eff4de644e969a18364713b90b7f27fa1c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16734
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins)
|
|
In spd_util.c function mainboard_get_spd_data(), spd_file can
either be NULL or will point to the first byte of the SPD data,
and should not be dereferenced.
Change-Id: I08677976792682cc744ec509dd183eadf5e570a5
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/16612
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Populate mainboard related Memory Init Params i.e, SPD
Rcomp values, DQ and DQs values.
Change-Id: Id62c43a72a0e34fa2e8d177ce895d395418e2347
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/16316
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add placeholders for functions required when skylake
uses FSP2.0 driver, keeping the fsp1.1 flow intact.
Change-Id: I5446f8cd093af289e0f6022b53a985fa29e32471
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/16301
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
On x86 platforms, google_chromeec_early_init() is used to put the EC
into RO mode when there's a recovery request. This is to avoid training
memory multiple times when the recovery request is through an EC host
event while the EC is running RW code. Under that condition the EC will
be reset (along with the rest of the system) when the kernel verification
happens. This leads to an execessively long recovery path because of the
double reboot performing full memory training each time.
By putting this logic into the verstage program this reduces the
bootblock size on the skylake boards. Additionally, this provides the
the correct logic for all future boards since it's not tied to FSP
nor the mainboard itself. Lastly, this double memory training protection
works only for platforms which verify starting from bootblock. The
platforms which don't start verifying until after romstage need to
have their own calls (such as haswell and baytrail).
Change-Id: Ia8385dfc136b09fb20bd3519f3cc621e540b11a5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16318
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Provide a default value of 0 in drivers/spi as there weren't
default values aside from specific mainboards and arch/x86.
Remove any default 0 values while noting to keep the option's
default to 0.
BUG=chrome-os-partner:56151
Change-Id: If9ef585e011a46b5cd152a03e41d545b36355a61
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16192
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Since commit 3bfd7cc (drivers/pc80: Rework normal / fallback selector
code) the reboot counter stored in `reboot_bits` isn't reset on a reboot
with `boot_option = 1` any more. Hence, with SKIP_MAX_REBOOT_CNT_CLEAR
enabled, later stages (e.g. payload, OS) have to clear the counter too,
when they want to switch to normal boot. So change the bits to (h)ex
instead of (r)eserved.
To clarify their meaning, rename `reboot_bits` to `reboot_counter`. Also
remove all occurences of the obsolete `last_boot` bit that have sneaked
in again since 24391321 (mainboard: Remove last_boot NVRAM option).
Change-Id: Ib3fc38115ce951b75374e0d1347798b23db7243c
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/16157
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineering.com>
Reviewed-by: York Yang <york.yang@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: Ia1f24d328a065a54975adde067df36c5751bff2d
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/15987
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Program PIRQ Routing with correct values, as done by FSP, and also in
'soc/intel/skylake/romstage/pch.c' file. If not done, these values get
overridden by "0" during PxRC -> PIRQ programming in ramstage, in
'soc/intel/skylake/lpc.c' file pch_pirq_init()function.
BUG=none
BRANCH=none
TEST=Build and boot kunimitsu
Change-Id: Ibeb9a64824a71c253e45d6a1c6088abd737cf046
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Reviewed-on: https://review.coreboot.org/16044
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
In some cases, we don't want the Chrome EC firmwares (both EC and PD)
built directly by the coreboot build system or included in images at
all. This is already supported with EC_EXTERNAL_FIRMWARE but it does
implement a binary (build and include) or (neither build nor include)
policy.
Some cases require the ability to separately control whether the EC
and PD firmwares should be built and included by the coreboot build
system, only included from externally-built images or not included
at all.
This introduces config changes implementing that behaviour, renaming
options to make it clear that they are specific to the Chrome EC.
Change-Id: I44ccee715419360eb7d83863f4f134fcda14a8e4
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/16033
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The Chrome EC codebase no longer supports the google/lars and
intel/kunimitsu boards. Disable the build in those platforms.
Change-Id: Ic4f5a1a34bb19ee31632c1ad8430c30f7154f138
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/15869
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This removes the newlines from all files found by the new
int-015-final-newlines script.
Change-Id: I65b6d5b403fe3fa30b7ac11958cc0f9880704ed7
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/15975
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Keep this enabled by default as most x86 platforms could have PCI-e
slots equipped with one of these Intel WiFi adapters.
The Kconfig entries under google boards had no function previously,
the variable was never referenced.
Change-Id: I728ce3fd83d51d4e5e32b848a2079c5fcee29349
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15931
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Use the ACPI generator for creating the Chrome OS gpio
package. Each mainboard has its own list of Chrome OS
gpios that are fed into a helper to generate the ACPI
external OIPG package. Additionally, the common
chromeos.asl is now conditionally included based on
CONFIG_CHROMEOS.
Change-Id: I1d3d951964374a9d43521879d4c265fa513920d2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15909
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Define LPC decode ranges for EC communication.
BUG=chrome-os-partner:55357
BRANCH=none
TEST=Built and boot kunimitsu to ensure no EC timeout error
Change-Id: Idefdd79e67e89a794195c6821fee16550d1eda53
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/15898
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Move mainboard post console init functionality (google_chrome_ec_init &
early_gpio programming) from verstage to bootblock.
Add chromeos-ec support in bootblock
BUG=chrome-os-partner:55357
BRANCH=none
TEST=Built and boot kunimitsu till POST code 0x34
Change-Id: I1b912985a0234d103dcf025b1a88094e639d197d
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/15786
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
All the mainboards share the same config options for CHROMEOS. Instead
of duplicating those in every mainboard, move the CHROMEOS config to SoC
and make it dependent on MAINBOARD_HAS_CHROMEOS.
BUG=chrome-os-partner:55431
Change-Id: Iafabb6373dfe16aaf0fe2cbc4e978952adeb403e
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15822
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Reduce duplicate code by using the Chrome EC SMI helper functions.
BUG=chrome-os-partner:54977
Change-Id: Ie83e93db514aa0e12e71d371d7afab34a70797fd
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15689
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The mainboard_smi_sleep() function takes ACPI sleep values
of the form S3=3, S4=4, S5=5, etc. All the chipsets ensure
that whatever hardware PM1 control register values are used
the interface to the mainboard is the same. Move all the
SMI handlers in the mainboard directory to not open code
the literal values 3 and 5 for ACPI_S3 and ACPI_S5.
There were a few notable exceptions where the code was
attempting to use the hardware values and not the common
translated values. The few users of SLEEP_STATE_X were
updated to align with ACPI_SX as those defines are
already equal. The removal of SLEEP_STATE_X defines is
forthcoming in a subsequent patch.
BUG=chrome-os-partner:54977
Change-Id: I76592c9107778cce5995e5af764760453f54dc50
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15664
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Declare the mainboard attached devices in the devicetree and enable
the provided device drivers by default to generate the ACPI objects
for these devices. Then remove the static ACPI objects from the DSDT
in mainboard.asl.
This was tesed on a Chell mainboard since I lack a kunitmisu device.
I used different GPIOs across boots to verify that the different
audio codec devices would be "detected" and generated in the SSDT.
Change-Id: I9b3b2247a84aeb7c07780958377d5bea14417ce6
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15317
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Move the existing I2C voltage configuration variable into a new
structure that is equivalent, similar to how USB ports are configured.
This is to make room for additional I2C configuration options like
bus speed and whether to enable the bus in early boot which are coming
in a subsequent commit.
The affected mainboards are updated in this commit so it will build.
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: Id2dea3df93e49000d60ddc66eb35d06cca6dd47e
Reviewed-on: https://review.coreboot.org/15104
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Add the voltage tolerance GPIO attribute for configuring I2C/I2S buses
that are at 1.8V. This is currently done by passing in a value to FSP
but it is needed earlier than FSP if the I2C bus is used in verstage.
This does not remove the need for the FSP input parameter, that is
still required so FSP doesn't disable what has been set in coreboot.
The mainboards that are affected are updated in this commit.
This was tested by exercising I2C transactions to the 1.8V codec while
in verstage on the google/chell mainboard.
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I93d22c2e3bc0617c87f03c37a8746e22a112cc9c
Reviewed-on: https://review.coreboot.org/15103
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Allow EC to send an interrupt using ACPI SMI when a MKBP event
is available. This will be used by the sensor stack.
Update all ACPI branch except those without sensors with:
for i in $(find . -name ec.h -exec grep -l MAINBOARD_EC_SCI_EVENTS {} \+
| cut -d '/' -f 2 | grep -v -e cyan -e lars); do
echo $i
cd $i
git diff ../lars/ec.h | patch -p 5
cd -
done
BUG=b:27849483
BRANCH=none
TEST=Compile on Samus. Tested in Cyan branch.
Change-Id: I4766d1d56c3b075bb2990b6d6f59b28c91415776
Signed-off-by: Martin Roth <martinroth@google.com>
Original-Commit-Id: d3b9f76a26397ff619f630c5e3d043a7be1a5890
Original-Change-Id: I56c46ee17baee109b9b778982ab35542084cbd69
Original-Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/342364
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14854
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
|
|
Command List:
Send command for PS4 exit fails
BUG=chrome-os-partner:52355
BRANCH=glados
TEST=Build and boot lars and verify no hang during active idle
CQ-DEPEND=CL:*257305
Change-Id: I9ffae71b1a38433ffc48ee7be7e2a13e69ad5b87
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 96f00e2d153f92339c378ce256eb7ce6824e3368
Original-Change-Id: I320ae154f3f7145811b57258ddb61b3beb584273
Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/341330
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14688
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change the existing chromeos.fmd files and the dts-to-fmd script to mark
RW_LEGACY as CBFS, so it's properly "formatted".
BUG=chromium:595715
BRANCH=none
TEST=none
Change-Id: I76de26032ea8da0c7755a76a01e7bea9cfaebe23
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 717a00c459906fa87f61314ea4541c31b50539f4
Original-Change-Id: I4b037b60d10be3da824c6baecabfd244eec2cdac
Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/336403
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14240
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
A long time ago many Chrome OS boards had pages full of duplicated
boilerplate code for the fill_lb_gpios() function, and we spent a lot of
time bikeshedding a proper solution that passes a table of lb_gpio
structs which can be concisely written with a static struct initializer
in http://crosreview.com/234648. Unfortunately we never really finished
that patch and in the mean time a different solution using the
fill_lb_gpio() helper got standardized onto most boards.
Still, that solution is not quite as clean and concise as the one we had
already designed, and it also wasn't applied consistently to all recent
boards (causing more boards with bad code to get added afterwards). This
patch switches all boards newer than Link to the better solution and
also adds some nicer debug output for the GPIOs while I'm there.
If more boards need to be converted from fill_lb_gpio() to this model
later (e.g. from a branch), it's quite easy to do with:
s/fill_lb_gpio(gpio++,\n\?\s*\([^,]*\),\n\?\s*\([^,]*\),\n\?\s*\([^,]*\),\n\?\s*\([^,]*\));/\t{\1, \2, \4, \3},/
Based on a patch by Furquan Shaikh <furquan@google.com>.
BUG=None
BRANCH=None
TEST=Booted on Oak. Ran abuild -x.
Change-Id: I449974d1c75c8ed187f5e10935495b2f03725811
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14226
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
GPP_E_21_DDPC_CTRLDATA is pulled low by default.
This causes 2.5mW leakage from 3.3S to GND via R877.
So configuring GPP_E21 in native mode.
BUG=chrome-os-partner:50958
BRANCH=glados
TEST=Build and boot. Measure Power at 3P3S(R955).
Change-Id: I2bdcb698d0b0cd3228c2e59653ac3fb3b1a26951
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d01f932cda44b0b44c5494b316aefc43c8b84c52
Original-Change-Id: Ifd13ea4b16108ef98d09891365f0d17831ab5f65
Original-Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/332369
Original-Commit-Ready: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14108
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The lint script didn't catch that these mainboard directories didn't
have board_info files.
Add all missing board_info.txt files
Change-Id: Ib1d61a3c04e91b22480527885faf60c22093d98a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14117
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
With gpio PADRSTCFG set to DEEP & GPIROUTIOXAPIC=1 & PADRSTCFG, causes
IRQ storm after S3 resume. GPIOs that fire IRQs via IOAPIC need to get
their logic reset over pltrst and hence configuring PADRSTCFG to
PLTRST to prevent IRQ strom after S3 resume.
BRANCH=glados
BUG=chrome-os-partner:50536
TEST=Build for kunimitsu and Boot on FAB4, no irq storm observed
after S3 resume.
Change-Id: I7f1ae90aed03778e7d6cb2d79de0efe9a6d9e20d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: aff91da4feaf8f7e42cfeee756cf468288cbfd68
Original-Change-Id: I7cac60fb0144e090b8decb05d948b2d8d2f8deac
Original-Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/329453
Original-Commit-Ready: Naresh Solanki <naresh.solanki@intel.com>
Original-Tested-by: Naresh Solanki <naresh.solanki@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/331174
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13992
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Enable SDHCI runtime PM since the display flicker due to
SCC Power Gatingis addressed by 0x82 microcode
BRANCH=glados
BUG=chrome-os-partner:44663
TEST=Check if display flicker is gone when SCC is power-gated
Change-Id: I7d1ac6e77a0d2e0a25414df6130862efcdae2c82
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b552120cfeff09d16cb79652b7de7296121858ba
Original-Change-Id: Id82df475b262e8a91f0a93f8ddf80002b05c52f3
Original-Signed-off-by: Medha Garima <medha.garima@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/329651
Original-Commit-Ready: Jenny Tc <jenny.tc@intel.com>
Original-Tested-by: Jenny Tc <jenny.tc@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/331172
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13990
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Include the code to add the WRDD method to the existing
WiFi Device in the mainboard ACPI code.
BUG=chrome-os-partner:50516
BRANCH=glados
TEST=boot on chell with 'region'='us' in VPD and see that it is
properly read out by calling WRDD method on the WiFi device.
Compile for the other platforms that are modified.
Change-Id: Ibcff7585744071ba9018d0ba50e274e63365b150
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: b74bb553415f7ce224ddcb0c2c5ae509b8fed516
Original-Change-Id: Ieb24e0e64974ee3686d14a234e148f5d07fc8b12
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/329296
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13840
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This patch provides config options to enable/disable Intel SST
(Speed Shift Technology).
BUG=chrome-os-partner:47517
BRANCH=None
TEST=Booted kunimitsu/lars, verified HWP driver load successfully.
CQ-DEPEND=CL:313107
Change-Id: I9419a754384f96d308a5ac2ad90bbb519edc296e
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 5efb7978e9d3ca9a709a4793ad213423a1c3c45d
Original-Change-Id: I328b074b4f56ebe3caa8952ce3df7f834c1cf40f
Original-Signed-off-by: Robbie Zhang <robbie.zhang@intel.com>
Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/326650
Original-Tested-by: Wenkai Du <wenkai.du@intel.com>
Original-Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-on: https://review.coreboot.org/13843
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The GPIO USB_A0_ILIM_SEL & USB_A1_ILIM_SEL should be low to enable 2A
charging from the USB Type-A port.
BUG=chrome-os-partner:50212
BRANCH=glados
TEST=Build CB & booted kunimitsu, verified that USB_A0_ILIM_SEL &
USB_A0_ILIM_SEL are at logic zero.
Change-Id: I989987eaaa2015720bbb1403caf20b97a996e168
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 640834506ad749359104e24fdb664044d499fd5f
Original-Change-Id: I741f79a69b78dbb7d4f8cb9718355d802b94b96d
Original-Signed-off-by: Naresh G Solanki <Naresh.Solanki@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/327121
Original-Commit-Ready: Naresh Solanki <naresh.solanki@intel.com>
Original-Tested-by: Naresh Solanki <naresh.solanki@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13722
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This makes the test IDs the default, taken from depthcharge
master (board/*/fmap.dts, hwid property).
Change-Id: I25793962ac16f451f204dbba6ede6a64c847cfd5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13634
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
|
|
For devices with Chrome EC, state the "board" name(s), so they're built
as part of the image.
A number of EC boards aren't supported in the Chrome EC master branch,
they're brought along but commented out, waiting for a port to master
in the Chrome EC code base.
Change-Id: Ic6ab821de55cf9b4e8b48fe5ebc603adeb8bb28b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13548
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Some of the pins are not connected/used on kunimitsu board,
this patch will make them "Not connected".
Un-used PINS will controlled by GPIO controller (PMODE = GPIO) and
GPIO TX/RX will be disabled.
BRANCH=none
BUG=none
TEST=Build and booted in kunimitsu.
Change-Id: Iaf0d4806836648808fb91cfc7807c4c1595a5167
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a7c25ad8ee0d189178124cff20569152b1053488
Original-Change-Id: I3add625b2bf01223cd389c6a5585827ac62dd0c0
Original-Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/316700
Original-Commit-Ready: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Tested-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/13629
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Enable the option to back up Vboot non-volatile data from CMOS
to flash as these boards have the necessary nvram fmap region
and are using vboot2 which does not backup to the TPM.
BUG=chrome-os-partner:47915
BRANCH=glados
TEST=manually tested on chell
Change-Id: I7bfe88f2cb7826f3315987aaf56f77df708896ce
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 35df03c5ef24406129cba920ee9af6d55458cd45
Original-Change-Id: Ia7c014fe2768c55941a65ec5605ef4fbc986151c
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/324123
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13601
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
kunimitisu platform updated these two fields if maxim codec
is detected.
BUG=chrome-os-partner:49570
BRANCH=glados
TEST=Build & Booted kunimitsu board. Verified that kernel
can read new strings.
Change-Id: Icbe0d87f0b46da794db36191b0e12948fe6a2fe6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f3d07ef07c382a2df140b457273feb3899228e10
Original-Change-Id: Ia6a111d15b851ae3fa918816e13b54ace215a09a
Original-Signed-off-by: Fang, Yang A <yang.a.fang@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/324631
Original-Commit-Ready: Yang Fang <yang.a.fang@intel.com>
Original-Tested-by: Yang Fang <yang.a.fang@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13603
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
These devicetree patches set the ACPI PM Disabled variable to 1.
This will disable the ACPI PM timer and remove from FADT table.
BRANCH=none
BUG=chrome-os-partner:48646
TEST=Build for skylake board with the PmTimerDisabled policy in
devicetree set to 1.
iotools mmio_read32 0xfe0000fc should return 0x2.
cat /sys/devices/system/clocksource/clocksource0/available_clocksource
should list only "tsc hpet". acpi_pm should be removed from this list.
Change-Id: Ia66f37e13f0f2f527651418b8b5c337b56c25c7f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: db3e8130495038850c7034b89701b4a5fcf88dce
Original-Change-Id: Ib1b876cfa361b8cbdde2f9e212e3da4fd724e498
Original-Signed-off-by: Archana Patni <archana.patni@intel.com>
Original-Signed-off-by: Subramony Sesha <subramony.sesha@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/319362
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13589
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
In order to support both separate verstage and a verified boot after
romstage one needs to ensure the proper GPIO and EC configuration
been complete. Therefore, move that logic to
car_mainboard_post_console_init() in car.c file which gets called
in the early flow of a CAR stage (either verstage or romstage).
BUG=chrome-os-partner:44827
BRANCH=glados
TEST=Built kunimitsu w/ separate verstage.
Change-Id: If34cae5516a6df7f72f1f57cab495db70787177e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 543155665e1b05efe82c7440c124a5c83c656aa6
Original-Change-Id: I7281c4373fcbaaf0beedaa63dcf0dedb5316349f
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/324074
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13584
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Some trivial cleanup.
Change-Id: I866efc4939b5e036ef02d1acb7b8bb8335671914
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13427
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Updating EC+PD takes long enough to update that it is good to
show the "critical update" screen when doing an EC/PD update.
BUG=chrome-os-partner:49650
BRANCH=glados
TEST=Build and boot on chell in normal mode with an EC update payload
and ensure that it reboots to enable graphics, shows the "critical
update" screen, and then reboots to disable graphics init again.
Change-Id: I436b96b95595b68273e594bdcfe2db0789ee26b2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 08e45decd066f8f57ad103ff8b76cb7a916afa9e
Original-Change-Id: Ie250f4531437e4a0ce14b5aeb0fe564e9461fe4d
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/322783
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13075
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Override the default PL2 values with ones recommended by Intel.
BUG=chrome-os-partner:49292
BRANCH=glados
TEST=MMIO 0x59A0[14-0] to find PL1 value (0x78) / 8 Watts = 15W
MMIO 0x59A0[15] to find PL1 enable/disable = Disable
MMIO 0x59A0[46-32] to find PL2 Value (0xC8) / 8 Watts = 25W
Here PL2 is set to 25W and PL1 is disabled.
CQ-DEPEND=CL:321392
Change-Id: I338b1d4879ae1b5f760e3c1d16e379a2baa1c965
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fa6a115227385bef44abfacf58af306c16ed478a
Original-Change-Id: I3bfc50256c9bdd522c984b11faf2903d7c44c81f
Original-Signed-off-by: pchandri <preetham.chandrian@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/322454
Original-Commit-Ready: Venkateswarlu V Vinjamuri <venkateswarlu.v.vinjamuri@intel.com>
Original-Tested-by: Venkateswarlu V Vinjamuri <venkateswarlu.v.vinjamuri@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Preetham Chandrian <preetham.chandrian@intel.com>
Original-Reviewed-by: Venkateswarlu V Vinjamuri <venkateswarlu.v.vinjamuri@intel.com>
Reviewed-on: https://review.coreboot.org/13071
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
These are generated from depthcharge's board/*/fmap.dts using the
dts-to-fmd.sh script.
One special case is google/veyron's chromeos.fmd, which is used for a
larger set of boards - no problem since the converted fmd was the same
for all of them.
Set aside 128K for the bootblock on non-x86 systems (where the COREBOOT
region ends up at the beginning of flash). This becomes necessary
because we're working without a real cbfs master header (exists for
transition only), which carved out the space for the offset.
Change-Id: Ieeb33702d3e58e07e958523533f83da97237ecf1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/12715
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This patch added default values for two SAR properies
introduced by updated nau8825 codec driver. Also updated
sar-threshold to improve button detection accuracy.
Bug=chrome-os-partner:49394
BRANCH=glados
TEST=Build for kunimitsu. Tested with 4-button headset
Change-Id: I4096c60be54819d0ab2bf4b72a1e403f88d96af0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4b747e9dffed1c51131f0028879d4c22283c8ec5
Original-Change-Id: I3e222ff58c1483e261acf1cea297164966bf8689
Original-Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Original-Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/322241
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13014
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
As the audio card needs 1.8V I2C operation. This patch adds
entry into devicetree.cb to set I2C port 4 operate at 1.8V.
Branch=None
Bug=chrome-os-partner:47821
Test=Built & booted kunimitsu board. Verified that I2C
port 4 is operating at 1.8V level
CQ-DEPEND=CL:*242225, CL:*241206, CL:315167
Change-Id: Ida69b885737aef0cfcf6a6ca21b3650169e614d9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 990df9c1c65e75aae0a1329ead3790e78021b804
Original-Change-Id: Ifbb65e3d83561b52cc18e48b89d146c2f88f289b
Original-Signed-off-by: Naresh G Solanki <Naresh.Solanki@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/315168
Original-Commit-Ready: Naresh Solanki <naresh.solanki@intel.com>
Original-Tested-by: Robbie Zhang <robbie.zhang@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13010
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
MP init is already handled in coreboot, but it is also part of FSP
FSP has a implemented a provision to allow FSP to skip MP init and
let coreboot handle it.
BRANCH=none
BUG=chrome-os-partner:44805
TEST=Build and booted in kunimitsu with SkipMpInit enabled from CB.
CQ-DEPEND=CL:310192
Change-Id: Idd9b1424f23765ce227005a322ac72d9e9fc841a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5c52d0f0cc5d480c87fababc3316009e3ade6e45
Original-Change-Id: I9d92046d0237680b8d562814a9a605a36efb9516
Original-Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/312926
Original-Commit-Ready: Preetham Chandrian <preetham.chandrian@intel.com>
Original-Tested-by: Preetham Chandrian <preetham.chandrian@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12992
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This change enables SaGv feature for skylake
platform.As a result of this patch the skylake
platform will train memory at both low & high
frequency points.This will be used to
dynamically scale the work point
(voltage/frequencies).
The value "3" here means enable. Following
is the table for same.
0=Disabled(SaGv disabled)
1=FixedLow(Fixed to low frequency)
2=FixedHigh(Fixed to High frequency)
3=Enabled(SaGv Enabled.Dynamically changes)
BRANCH=None
BUG=chrome-os-partner:48534
TEST=Built for kunimitsu.
Tested on D1 silicon.
Change-Id: I2892d631d64495e6aed453af4fd526f4bf5bed68
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8e09d1a22927f5fcddd6c0be3f9edf3dcb8729be
Original-Change-Id: I32a7a53805068a52b381affaf061d69062cd8651
Original-Signed-off-by: haridhar <haridhar.kalvala@intel.com>
Original-Signed-off-by: Somayaji, Vishwanath <vishwanath.somayaji@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/315806
Original-Commit-Ready: Haridhar Kalvala <haridhar.kalvala@intel.com>
Original-Tested-by: Haridhar Kalvala <haridhar.kalvala@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Haridhar Kalvala <haridhar.kalvala@intel.com>
Reviewed-on: https://review.coreboot.org/12997
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The BOOT_BEEP gpio is used to activate the buffer which
isolates the I2S signals from PCH while doing a beep from depthcharge.
It needs to be lo to deactivate the buffer for audio playback from OS.
BUG=chrome-os-partner:47124
BRANCH=None
TEST=boot depthcharge & test beep with devbeep.
Boot OS and test audio playback.
Change-Id: I047513f6cbe9590820dfe3c369161a157864be97
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d0e04d6792a4511630b8111d0f4a64226042f3e6
Original-Change-Id: I0fa8f425ac413798740343823d026c6300c8eef1
Original-Signed-off-by: Rohit Ainapure <rohit.m.ainapure@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/319220
Original-Commit-Ready: Rohit M Ainapure <rohit.m.ainapure@intel.com>
Original-Tested-by: Michael Rang <michael.rang@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/12988
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The HeciEnabled decides the state of Heci1 at end of boot. Setting to 0
(default) disables Heci1 and hides the device from OS. It internally uses
the FSP Psf Unlock policy to disable the Heci1. It also adds the p2sb
device in the devicetree which is necessary for hiding and unhiding the
device.
BRANCH=none
BUG=chrome-os-partner:45618
TEST=build for kunimitsu.
CQ-DEPEND=CL:*238451
Change-Id: Ieba2ab3b4ac518cce8371069028170ba99aaf079
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: cbefe9d6e9a981594534d346be67a5cd94483d05
Original-Change-Id: I8c95b5b9b28ba8441ca031f4e9ec523d913990d6
Original-Signed-off-by: Archana Patni <archana.patni@intel.com>
Original-Signed-off-by: Subramony Sesha <subramony.sesha@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/311913
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12977
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This patch power gates the Kepler module
on skylake kunimitsu board. This is required
to save power since this is consuming over 500mw
of power in all active use cases.
The device can be powered on later by using the
kernel driver as required by setting the
kepler enable gpio high.
BRANCH=None
BUG=chrome-os-partner:45962
TEST=Build and Boot Kunimitsu and check lspci.
The Kepler device should not be listed.
Also power measurement of board should give
approximately 300mW of reduction in power.
Change-Id: I244a23385e20ef1431dc895536c8a47e1f5770d7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8d4fb7d01f32ac307a351c307b8461628c0e5414
Original-Change-Id: Idafa74d7ff14d67a5b1e635f783efd84b5a7399c
Original-Signed-off-by: Pravin Angolkar <pravin.k.angolkar@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/302277
Original-Commit-Ready: Naveenkrishna Ch <naveenkrishna.ch@intel.com>
Original-Tested-by: Pravin K Angolkar <pravin.k.angolkar@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12964
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Enable the config option for TPM to use PIRQ instead of SERIRQ
and enable the MAINBOARD_HAS_LPC_TPM option.
BUG=chrome-os-partner:46335
BRANCH=none
TEST=tested this patch with TPM ACPI driver(tpm_tis.force=0)
Change-Id: I311cc7d2e70cc52a7e90f3c3c60d422b7b998789
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ad9450c342c752f87e3385a2acd5dd79b65cc75f
Original-Change-Id: Ib7b1b40c296fce80d5366bd19e7ff20d7161db95
Original-Signed-off-by: Rishavnath Satapathy <rishavnath.satapathy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/316287
Original-Commit-Ready: Pravin K Angolkar <pravin.k.angolkar@intel.com>
Original-Commit-Ready: Naveenkrishna Ch <naveenkrishna.ch@intel.com>
Original-Tested-by: Pravin K Angolkar <pravin.k.angolkar@intel.com>
Original-Reviewed-by: Pravin K Angolkar <pravin.k.angolkar@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/12963
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Provide an option for including the NHLT blobs within the
kunimitsu mainboard directory while also adding the ACPI NHLT
table generation that the current hardware supports.
Kunimitsu does support two audio codec, ADI and MAXIM,
hence use AUDIO_DB_ID to read correct codec and craete
NHLT table, this will also help to load only one amplifier ASL
for machine driver consumption.
BUG=chrome-os-partner:44481
BRANCH=None
TEST=Built and booted kunimitsu board. Audio worked
with both ADI and MAXIM audio card.
CQ-DEPEND=CL:316352
Change-Id: Ic9b9af83a0229fdf5f1cb019245ae65ad9d2f06c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2db85062d65c5e831da297588aa4abb18d6ed1bb
Original-Change-Id: I3b08f3f23b334799a81cde81a30d6f231cc8583f
Original-Signed-off-by: Naresh G Solanki <Naresh.Solanki@intel.com>
Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/315450
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12959
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Make sure the latest & greatest Intel targets actually
build in our build system.
intel/sklrvp is still failing for reasons unrelated to the rest
of the skylake boards. Leaving that disabled for now.
Change-Id: Ie784628a57257cea30e5e47074648198b884f6db
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12857
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
remove the WakeConfigWolEnableOverride to disable WOL override
configuration in the General PM Configuration B (GEN_PMCON_B) register
BRANCH=none
BUG=none
TEST=Build and booted in kunimitsu
Change-Id: Ia523e7956c06c9f4a60e0a2296f771cc3c70bc25
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 12a07eebfb8fa4ee8013fbbb12283a0b429cacfd
Original-Change-Id: I2be6c5b0114e4c7d8a7b9ceb59ee32f28f61769f
Original-Reviewed-on: https://chromium-review.googlesource.com/316717
Original-Commit-Ready: Rizwan Qureshi <rizwan.qureshi@intel.com>
Original-Tested-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12958
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Cofigure VR settings for kunimitsu
BRANCH=none
BUG=chrome-os-partner:45387
TEST=Build and booted in kunimitsu
CQ-DEPEND=CL:311317
Change-Id: Ib2afe7694d2a807cea1befa73349bd21a3e7d909
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c3548d7cb3a00826377e819f20d07167b4eb2c65
Original-Change-Id: I6b80f509bc0ab6f65f26eec0651a3b44fb38fbf9
Original-Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/313068
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12945
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add new configuration parameters eg. #SLP_S3 assert width
BRANCH=none
BUG=chrome-os-partner:44075
TEST=Build and booted on kunimitsu, verified that CB is doing
the Lockdowns which were previously done by FSP.
CQ-DEPEND=CL:310869
Change-Id: I782df49bbf73c121b191f0661907173c4fd29b64
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: de0742869b1b148597d3714a3bc29a0dc08642aa
Original-Change-Id: I2b4041cdc22a29e79d2ff7f2cc49f51f80da5567
Original-Reviewed-on: https://chromium-review.googlesource.com/313309
Original-Commit-Ready: Rizwan Qureshi <rizwan.qureshi@intel.com>
Original-Tested-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12942
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
At S0, S0ix and S3 LPC LAD signals are
are floated at 400~500mV.
BRANCH=chrome-os-partner:48331
BUG=None
TEST=Build and Boot kunimitsu
Change-Id: I2e2654ac89f8e0c8d6ab1af31d0bd5a0d4c43db8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6f4b902e220dcde73df56970208c45fe3148b70e
Original-Change-Id: I597d4816d09d0cfd9b0ec183a9273551aed8688a
Original-Signed-off-by: pchandri <preetham.chandrian@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/316529
Original-Commit-Ready: Preetham Chandrian <preetham.chandrian@intel.com>
Original-Tested-by: Preetham Chandrian <preetham.chandrian@intel.com>
Original-Tested-by: Kyoung Il Kim <kyoung.il.kim@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Preetham Chandrian <preetham.chandrian@intel.com>
Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Reviewed-by: Kyoung Il Kim <kyoung.il.kim@intel.com>
Reviewed-on: https://review.coreboot.org/12957
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The write protect GPIO is not being configured early enough.
This is leading to coreboot reading incorrect value, and
writing the incorrect value in vboot shared file.
This is leading to "crossystem wpsw_boot" always returning 0
even with the write protect screw in place during boot.
BUG=chrome-os-partner:48292
BRANCH=None
TEST=Boot with the write protect screw in place. Issue
crossystem wpsw_boot. It should show 1.
Change-Id: I3a333a4dcce31be9afe28cf11b127090cc7b9421
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 462dd0229c2d3b81cd34bdd2e36bea844f58586c
Original-Change-Id: Ib7e0539845575b32322e243e89b81ffee077eb81
Original-Signed-off-by: Arindam Roy <arindam.roy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/316009
Original-Commit-Ready: Arindam Roy <rarindam@gmail.com>
Original-Tested-by: Arindam Roy <rarindam@gmail.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12952
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Adding support for Maxim 98357A audio amplifier.
BUG=chrome-os-partner:44481
BRANCH=None
TEST=Build & boot on Skylake kunimitsu Fab4 with MAXIM codec.
Verify audio playback works using MAXIM.
Change-Id: I4f020ccae540b02d5d533704a52cebb7805715fe
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c0a81300e02e917500fa3c0241c95dd795abaf04
Original-Change-Id: I8875c9a55f09b1ec353203cfcb2186dc5fd66542
Original-Signed-off-by: Rohit Ainapure <rohit.m.ainapure@intel.com>
Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/309894
Original-Tested-by: Rohit M Ainapure <rohit.m.ainapure@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12949
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Currently, the Power Limit 1 (PL1) value is 6W which is
low for high performance KPIs. This patch updates PL1
value as TDP. SKL-U has 15W TDP.
BRANCH=None
BUG=None
TEST=Built and boot on kunimitsu. Check for the PL1 value over
sysfs interface
"/sys/class/powercap/intel-rapl:0/constraint_0_power_limit_uw".
Load the system with Aquarium 1000 Fish, average FPS should be
meeting target 60 with this change.
Change-Id: I8e083192e8018edc2cf8b88530df1e05ede10bde
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: eb9aa00a4271875b5471c33883aa7da022f1cb0e
Original-Change-Id: I0c61fe1a9f76a9cf9a306240fb66d4c081d2bb5e
Original-Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/314416
Original-Commit-Ready: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Original-Tested-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Original-Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/12934
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Because these platforms haven't been getting build testing, they've
missed out on some of the improvements that the other platforms have
gotten.
Enable MAINBOARD_HAS_LPC_TPM so that they will build.
Change-Id: I5e44135b6dfa800fa14e5b08c3e3e5921d50b082
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12865
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The Chrome OS verified boot path supported multiple CBFS
instances in the boot media as well as stand-alone assets
sitting in each vboot RW slot. Remove the support for the
stand-alone assets and always use CBFS accesses as the
way to retrieve data.
This is implemented by adding a cbfs_locator object which
is queried for locating the current CBFS. Additionally, it
is also signalled prior to when a program is about to be
loaded by coreboot for the subsequent stage/payload. This
provides the same opportunity as previous for vboot to
hook in and perform its logic.
BUG=chromium:445938
BRANCH=None
TEST=Built and ran on glados.
CQ-DEPEND=CL:307121,CL:31691,CL:31690
Change-Id: I6a3a15feb6edd355d6ec252c36b6f7885b383099
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12689
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch adds GPIO mappings for PCH_BUZZER, AUDIO_DB_ID,
AUDIO_IRQ and BOOT_BEEP.
BUG=chrome-os-partner:47513
BRANCH=none
TEST=Built for kunimitsu but not verified on Fab 4.
Change-Id: I0172df3aa2a5c4bfc24422aa0bfb7e5f677d37c9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ba66bef6d402a1040f0f13bc828de400bc6371b7
Original-Change-Id: I1f2ed8fc283883a523a77e07de14ed90057b719b
Original-Signed-off-by: Saurabh Satija <saurabh.satija@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/311806
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/12600
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Updated Micron SPD data to correct values
BUG=none
BRANCH=none
TEST=Tested on FAB 4 with Micron Dimm
CQ-DEPEND=CL:312546
Change-Id: Iffe2917f083e4de7944c7f249cbf55bd199f6282
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 00234d81df38139312145c89cbf38d8ac3af5735
Original-Change-Id: Ifcc85cd1aae61e02b820cb25733dfb0680410107
Original-Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/313003
Original-Commit-Ready: Freddy Paul <freddy.paul@intel.com>
Original-Tested-by: Freddy Paul <freddy.paul@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12592
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Changed index 3 to be an exception of the default Rcomp Value
BUG=None
BRANCH=None
TEST=Tested on FAB 4 SKU 1
Change-Id: I154c254835c4f6995183840cc241feeb9a448cdb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f08eba3cf623b5869a7bb03fb3b6ba084cdd1622
Original-Change-Id: I0fbcff2c3526c4ed7cf90088ca23b43774cb9f8f
Original-Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/312715
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Freddy Paul <freddy.paul@intel.com>
Reviewed-on: https://review.coreboot.org/12591
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Updated Memory IDs and SKU IDs for FAB 4
Updated detection of single/dual channel memory to use SPD Index (Memory ID)
Added spd files for new dimms
Removed boardid.h as it is no longer needed
BUG=None
BRANCH=None
TEST=Tested on FAB4 SKU1 and SKU3
Change-Id: I60403c0e636ea28797d94cff9431af921631323e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ce39dc3b0b9448635f878ce8c1aea5b4743594c4
Original-Change-Id: I870b3dfa2c4f358defb9263e759de477bb32e620
Original-Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/312546
Original-Commit-Ready: Freddy Paul <freddy.paul@intel.com>
Original-Tested-by: Freddy Paul <freddy.paul@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/12590
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
EC_SOFTWARE_SYNC depends on CHROMEOS, so move it into the CHROMEOS section.
This fixes the kconfig warning:
warning: (CHROMEOS && BOARD_SPECIFIC_OPTIONS ...) selects
EC_SOFTWARE_SYNC which has unmet direct dependencies
(MAINBOARD_HAS_CHROMEOS && CHROMEOS && VBOOT_VERIFY_FIRMWARE)
Change-Id: I459f48fd18c7568c4584df7d4aefa69dec3e4907
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/12460
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Kernel needs to set Audio IRQ as wake capable.
BUG=chrome-os-partner:47450
BRANCH=NONE
TEST=System wakes up from S0ix by pressing headset buttons.
Change-Id: I0f89d05b4c5449e5e3277dde938d941e4ad8cbea
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 65bf434f7c7e1662211f9c8bf61eeb4f41bdc675
Original-Change-Id: I7b5b564023044b4458eb0976488018b3226f4c70
Original-Signed-off-by: Saurabh Satija <saurabh.satija@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/311793
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12414
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch enables GPP_B5 as ACPI_SCI for wake.
It also defines touchpad wake device in ACPI with GPE0_DW0_05 for _PRW.
BUG=chrome-os-partner:43491
BRANCH=none
TEST=Build for kunimitsu. Tested wake from touchpad on a reworked kunimitsu board.
Change-Id: I4347be8f7a4552c6b583f0797fab64045aa9792e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8c21f3b5df21d96937975dc20ee5e2f83fb3d75e
Original-Change-Id: I76e69bdba81ec22ae67c7cff3a807cea8c54a5b3
Original-Signed-off-by: Archana Patni <archana.patni@intel.com>
Original-Signed-off-by: Subramony Sesha <subramony.sesha@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/311007
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/12395
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The family variable was not being set yet for skylake, add this
to the current boards.
BUG=chromium:551715
BRANCH=none
TEST=emerge-glados coreboot
Change-Id: Icf175e4ce89cb47b9eabce1399eb3ef29e7a607f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7e379402f38634eb0204e03b616111fff9515cec
Original-Change-Id: Ia31fb04b5c22defc71a0c02d9fa1eff93ccbc49d
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/311213
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12390
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
- CACHE_ROM is no longer used in the coreboot code. It was removed in
commit 4337020b (Remove CACHE_ROM.)
- CAR_MIGRATION is also no longer used in coreboot code - it was removed
in commit cbf5bdfe (CBMEM: Always select CAR_MIGRATION)
- MARK_GRAPHICS_MEM_WRCOMB was removed in
commit 30fe6120 (MTRR: Mark all prefetchable resources as WRCOMB)
Change-Id: I8b33a08c256f6b022e57e9af60d0629d9a3ffac8
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/12327
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This patch enables the Fan thermal participant device
in the device tree for thermal active cooling action
for DPTF on SKL-U fan based kunimitsu board.
This patch defines the _ART table in dptf ASL file.
With active cooling policy (_ART), we can control the
fan on/off and speed.
BRANCH=None
BUG=chrome-os-partner:46493
TEST=Built for kunimitsu board. Tested to see that the
thermal devices and the participants are enumerated and
can be seen in the /sys/bus/platform/devices. Also,
checked the FAN type the cooling devices enumerated
in the /sys/class/thermal with sysfs interface.
Change-Id: I40c540dad32beefe249f025b570c347d3ad08c36
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 82ae11643ca23e65780006f3890f1d173363b8af
Original-Change-Id: If44b358052a677d13c74919f09a3eb89611fccad
Original-Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/307028
Original-Commit-Ready: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Original-Tested-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Original-Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/12323
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The last_boot NVRAM option was deprecated and removed in
commit 3bfd7cc6. Remove the last_boot option from all
affected mainboards to eliminate user confusion.
Change-Id: I7e201b9cf21dfe5dda156785bad078524098626d
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12316
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
|
|
It encourages users from writing to the FSF without giving an address.
Linux also prefers to drop that and their checkpatch.pl (that we
imported) looks out for that.
This is the result of util/scripts/no-fsf-addresses.sh with no further
editing.
Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11888
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Instead of having many different arrays for USB configuration,
with each array containing one bit of information, have one
array containing all the information for each port.
This way we can put the basic tuning parameters into a
structure and then define structures for the basic supported
configurations.
The existing port definitions are taken from the Skylake HSIO
tuning guide.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=build and boot on glados, verify USB functionality in
all ports.
Change-Id: I5873dee011ae9e250b6654c73a7bd5c17681095b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 864040412b2d2923d3acbfca8055724887c58506
Original-Change-Id: Id518b1086abbe4a8c25d77fd4efc2d0de856bd5f
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/306734
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12163
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add default properties for NAU8825 codec
Change jack detecion irq to level to match the
codec driver
BUG=chrome-os-partner:44481
BRANCH=None
TEST=Build and Boot Kunimitsu board with this patch
Verify Audio jack detection IRQ working
Change-Id: Iaab7a7bfbab30fa0914e56477f7c6a93717b4518
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 58c45538ea6a85724f9ab1837e5cf0971611a1f8
Original-Change-Id: I11466b8fd64b768e1e826639ba37bd6e00810370
Original-Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Original-Signed-off-by: Fang, Yang A <yang.a.fang@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/303760
Original-Commit-Ready: Yang Fang <yang.a.fang@intel.com>
Original-Tested-by: Yang Fang <yang.a.fang@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/12162
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
