summaryrefslogtreecommitdiff
path: root/src/mainboard/intel/kunimitsu/gpio.h
AgeCommit message (Collapse)Author
2016-06-09skylake: gpio: Add support for setting 1.8V tolerantDuncan Laurie
Add the voltage tolerance GPIO attribute for configuring I2C/I2S buses that are at 1.8V. This is currently done by passing in a value to FSP but it is needed earlier than FSP if the I2C bus is used in verstage. This does not remove the need for the FSP input parameter, that is still required so FSP doesn't disable what has been set in coreboot. The mainboards that are affected are updated in this commit. This was tested by exercising I2C transactions to the 1.8V codec while in verstage on the google/chell mainboard. Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I93d22c2e3bc0617c87f03c37a8746e22a112cc9c Reviewed-on: https://review.coreboot.org/15103 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-29intel/kunimitsu: configure native mode for GPP_E21Youvedeep Singh
GPP_E_21_DDPC_CTRLDATA is pulled low by default. This causes 2.5mW leakage from 3.3S to GND via R877. So configuring GPP_E21 in native mode. BUG=chrome-os-partner:50958 BRANCH=glados TEST=Build and boot. Measure Power at 3P3S(R955). Change-Id: I2bdcb698d0b0cd3228c2e59653ac3fb3b1a26951 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d01f932cda44b0b44c5494b316aefc43c8b84c52 Original-Change-Id: Ifd13ea4b16108ef98d09891365f0d17831ab5f65 Original-Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/332369 Original-Commit-Ready: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14108 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-16skylake mainboards: Configure gpio PADRSTCFG to PLTRSTNaresh G Solanki
With gpio PADRSTCFG set to DEEP & GPIROUTIOXAPIC=1 & PADRSTCFG, causes IRQ storm after S3 resume. GPIOs that fire IRQs via IOAPIC need to get their logic reset over pltrst and hence configuring PADRSTCFG to PLTRST to prevent IRQ strom after S3 resume. BRANCH=glados BUG=chrome-os-partner:50536 TEST=Build for kunimitsu and Boot on FAB4, no irq storm observed after S3 resume. Change-Id: I7f1ae90aed03778e7d6cb2d79de0efe9a6d9e20d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: aff91da4feaf8f7e42cfeee756cf468288cbfd68 Original-Change-Id: I7cac60fb0144e090b8decb05d948b2d8d2f8deac Original-Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/329453 Original-Commit-Ready: Naresh Solanki <naresh.solanki@intel.com> Original-Tested-by: Naresh Solanki <naresh.solanki@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/331174 Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org> Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13992 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12intel/kunimitsu: Add SD card detect GPIO for SDHCI runtime PMmgarima
Enable SDHCI runtime PM since the display flicker due to SCC Power Gatingis addressed by 0x82 microcode BRANCH=glados BUG=chrome-os-partner:44663 TEST=Check if display flicker is gone when SCC is power-gated Change-Id: I7d1ac6e77a0d2e0a25414df6130862efcdae2c82 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: b552120cfeff09d16cb79652b7de7296121858ba Original-Change-Id: Id82df475b262e8a91f0a93f8ddf80002b05c52f3 Original-Signed-off-by: Medha Garima <medha.garima@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/329651 Original-Commit-Ready: Jenny Tc <jenny.tc@intel.com> Original-Tested-by: Jenny Tc <jenny.tc@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/331172 Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org> Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org> Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13990 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-18intel/kunimitsu: Set USB Type A current limit to 2ANaresh G Solanki
The GPIO USB_A0_ILIM_SEL & USB_A1_ILIM_SEL should be low to enable 2A charging from the USB Type-A port. BUG=chrome-os-partner:50212 BRANCH=glados TEST=Build CB & booted kunimitsu, verified that USB_A0_ILIM_SEL & USB_A0_ILIM_SEL are at logic zero. Change-Id: I989987eaaa2015720bbb1403caf20b97a996e168 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 640834506ad749359104e24fdb664044d499fd5f Original-Change-Id: I741f79a69b78dbb7d4f8cb9718355d802b94b96d Original-Signed-off-by: Naresh G Solanki <Naresh.Solanki@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/327121 Original-Commit-Ready: Naresh Solanki <naresh.solanki@intel.com> Original-Tested-by: Naresh Solanki <naresh.solanki@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13722 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-09intel/kunimitsu: Clean up GPIOs.Pratik Prajapati
Some of the pins are not connected/used on kunimitsu board, this patch will make them "Not connected". Un-used PINS will controlled by GPIO controller (PMODE = GPIO) and GPIO TX/RX will be disabled. BRANCH=none BUG=none TEST=Build and booted in kunimitsu. Change-Id: Iaf0d4806836648808fb91cfc7807c4c1595a5167 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a7c25ad8ee0d189178124cff20569152b1053488 Original-Change-Id: I3add625b2bf01223cd389c6a5585827ac62dd0c0 Original-Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/316700 Original-Commit-Ready: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Original-Tested-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/13629 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-29src/: Chmod 644 all .c, .h, .asl, .inc, .cb, .hex, & Kconfig filesMartin Roth
Some trivial cleanup. Change-Id: I866efc4939b5e036ef02d1acb7b8bb8335671914 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13427 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-01-18intel/kunimitsu: Set BOOT_BEEP gpio to a default loRohit Ainapure
The BOOT_BEEP gpio is used to activate the buffer which isolates the I2S signals from PCH while doing a beep from depthcharge. It needs to be lo to deactivate the buffer for audio playback from OS. BUG=chrome-os-partner:47124 BRANCH=None TEST=boot depthcharge & test beep with devbeep. Boot OS and test audio playback. Change-Id: I047513f6cbe9590820dfe3c369161a157864be97 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d0e04d6792a4511630b8111d0f4a64226042f3e6 Original-Change-Id: I0fa8f425ac413798740343823d026c6300c8eef1 Original-Signed-off-by: Rohit Ainapure <rohit.m.ainapure@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/319220 Original-Commit-Ready: Rohit M Ainapure <rohit.m.ainapure@intel.com> Original-Tested-by: Michael Rang <michael.rang@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/12988 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-18intel/kunimitsu: Power gate Kepler devicePravin Angolkar
This patch power gates the Kepler module on skylake kunimitsu board. This is required to save power since this is consuming over 500mw of power in all active use cases. The device can be powered on later by using the kernel driver as required by setting the kepler enable gpio high. BRANCH=None BUG=chrome-os-partner:45962 TEST=Build and Boot Kunimitsu and check lspci. The Kepler device should not be listed. Also power measurement of board should give approximately 300mW of reduction in power. Change-Id: I244a23385e20ef1431dc895536c8a47e1f5770d7 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8d4fb7d01f32ac307a351c307b8461628c0e5414 Original-Change-Id: Idafa74d7ff14d67a5b1e635f783efd84b5a7399c Original-Signed-off-by: Pravin Angolkar <pravin.k.angolkar@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/302277 Original-Commit-Ready: Naveenkrishna Ch <naveenkrishna.ch@intel.com> Original-Tested-by: Pravin K Angolkar <pravin.k.angolkar@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12964 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-15intel/kunimitsu: Enable 20K PU on LPC_LAD 0-3pchandri
At S0, S0ix and S3 LPC LAD signals are are floated at 400~500mV. BRANCH=chrome-os-partner:48331 BUG=None TEST=Build and Boot kunimitsu Change-Id: I2e2654ac89f8e0c8d6ab1af31d0bd5a0d4c43db8 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 6f4b902e220dcde73df56970208c45fe3148b70e Original-Change-Id: I597d4816d09d0cfd9b0ec183a9273551aed8688a Original-Signed-off-by: pchandri <preetham.chandrian@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/316529 Original-Commit-Ready: Preetham Chandrian <preetham.chandrian@intel.com> Original-Tested-by: Preetham Chandrian <preetham.chandrian@intel.com> Original-Tested-by: Kyoung Il Kim <kyoung.il.kim@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Preetham Chandrian <preetham.chandrian@intel.com> Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Original-Reviewed-by: Kyoung Il Kim <kyoung.il.kim@intel.com> Reviewed-on: https://review.coreboot.org/12957 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-15intel/kunimitsu: Correct the output for crossystem wpsw_bootArindam Roy
The write protect GPIO is not being configured early enough. This is leading to coreboot reading incorrect value, and writing the incorrect value in vboot shared file. This is leading to "crossystem wpsw_boot" always returning 0 even with the write protect screw in place during boot. BUG=chrome-os-partner:48292 BRANCH=None TEST=Boot with the write protect screw in place. Issue crossystem wpsw_boot. It should show 1. Change-Id: I3a333a4dcce31be9afe28cf11b127090cc7b9421 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 462dd0229c2d3b81cd34bdd2e36bea844f58586c Original-Change-Id: Ib7e0539845575b32322e243e89b81ffee077eb81 Original-Signed-off-by: Arindam Roy <arindam.roy@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/316009 Original-Commit-Ready: Arindam Roy <rarindam@gmail.com> Original-Tested-by: Arindam Roy <rarindam@gmail.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12952 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-15intel/kunimitsu: Add support for MAX98357A audio amplifierRohit Ainapure
Adding support for Maxim 98357A audio amplifier. BUG=chrome-os-partner:44481 BRANCH=None TEST=Build & boot on Skylake kunimitsu Fab4 with MAXIM codec. Verify audio playback works using MAXIM. Change-Id: I4f020ccae540b02d5d533704a52cebb7805715fe Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: c0a81300e02e917500fa3c0241c95dd795abaf04 Original-Change-Id: I8875c9a55f09b1ec353203cfcb2186dc5fd66542 Original-Signed-off-by: Rohit Ainapure <rohit.m.ainapure@intel.com> Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/309894 Original-Tested-by: Rohit M Ainapure <rohit.m.ainapure@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12949 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-12-03intel/kunimitsu: Coreboot GPIO changes for FAB 4.Saurabh Satija
This patch adds GPIO mappings for PCH_BUZZER, AUDIO_DB_ID, AUDIO_IRQ and BOOT_BEEP. BUG=chrome-os-partner:47513 BRANCH=none TEST=Built for kunimitsu but not verified on Fab 4. Change-Id: I0172df3aa2a5c4bfc24422aa0bfb7e5f677d37c9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: ba66bef6d402a1040f0f13bc828de400bc6371b7 Original-Change-Id: I1f2ed8fc283883a523a77e07de14ed90057b719b Original-Signed-off-by: Saurabh Satija <saurabh.satija@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/311806 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/12600 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-11intel/kunimitsu: Enable wake from touch pad.Archana Patni
This patch enables GPP_B5 as ACPI_SCI for wake. It also defines touchpad wake device in ACPI with GPE0_DW0_05 for _PRW. BUG=chrome-os-partner:43491 BRANCH=none TEST=Build for kunimitsu. Tested wake from touchpad on a reworked kunimitsu board. Change-Id: I4347be8f7a4552c6b583f0797fab64045aa9792e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8c21f3b5df21d96937975dc20ee5e2f83fb3d75e Original-Change-Id: I76e69bdba81ec22ae67c7cff3a807cea8c54a5b3 Original-Signed-off-by: Archana Patni <archana.patni@intel.com> Original-Signed-off-by: Subramony Sesha <subramony.sesha@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/311007 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/12395 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-27intel/kunimitsu: csme: program sml gpios for csme power gatingArchana Patni
For SMT controllers to power gate, all SMT/SMS clock, data and alert signals should be inactive. The SML0 blocks are not used for any functional purposes and are not configured in the GPIO tables. SMT hardware will not allow the blocks to be power gated in this scenario. The SML* pins are now configured as GPIOs - input and deep. With this change, the SMT blocks are properly power gating. BRANCH=none BUG=chrome-os-partner:45618 TEST=build for Kunimitsu, boot on FAB3. Change-Id: I16b31a8d5c3c9df0f37df15c751c5a0978ac0feb Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d2913a75969008583f454a4bfc9da2156266548b Original-Change-Id: I00dca84a3f6ba7bda4ca1c206b49ff81482279a5 Original-Signed-off-by: Archana Patni <archana.patni@intel.com> Original-Signed-off-by: Subramony Sesha <subramony.sesha@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/306391 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/12161 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-09-17kunimitsu: Enable wake-on-wifiDuncan Laurie
- Assign GPE DW0 to GPP_B block - Enable GPP_B16 as ACPI_SCI for wake - Define PCIe WLAN device in ACPI with GPE0_DW0_16 for _PRW Note that current designs cannot wake from Deep S3 via wifi. BUG=chrome-os-partner:40635 BRANCH=none TEST=emerge-kunimitsu coreboot Change-Id: I1fe15a5a9b3d868a0e4f1bfb102b69f024c3aa48 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: de9dfee840246866a8dcca2e1c42c0292e820529 Original-Change-Id: I926d74b6bcf6d64c3db61ed23d7c17b51a98b052 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/298232 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11651 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-10kunimitsu: Clean up mainboard code to match gladosDuncan Laurie
Clean up the intel/kunimitsu mainboard code to match the code and cleanups in glados. Many of these are trivial changes that do not impact things in a meaningful way but will make it easier to diff the code and keep the mainboards in sync. - use relative path for mainboard includes to make porting easier - fix trivial style issues to match glados so diffs are clean - pull GPIO configuration into gpio.h and use from there - remove thermal.h as it is not used on this board - make info message BIOS_INFO instead of BIOS_ERR - add support for SPD manufacturer and part number in SMBIOS BUG=chrome-os-partner:40635 BRANCH=none TEST=emerge-kunimitsu coreboot Change-Id: I64a053bcec0e0ff25a57f65659f391ab64d9a11a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e47f0fd3e00a665f07098c7ea0018d51b105d1be Original-Change-Id: Ib787f3ccc63115de48c4d608ca2bd81b58d24b6c Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/297752 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11576 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-08-29intel/kunimitsu: fix SCI handlingWenkai Du
Ported below patch from glados to kunimitsu: glados: Abstract board GPIO configuration in gpio.h Original-change-Id: I3f1754012158dd5c7d5bbd6e07e40850f21af56d Originally-signed-off-by: Duncan Laurie <dlaurie@chromium.org> Originally-reviewed-on: https://chromium-review.googlesource.com/293942 BUG=chrome-os-partner:40828 BRANCH=none TEST=Verify that acpi interrupts are incrementing on kunimitsu. Change-Id: Ifeddb34289b6e62c936cf6c542906d6e7ef96ddd Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Original-Commit-Id: 8ff0dd2dcdf6485f0171fb967f7de3015cf4e4ad Original-Change-Id: I1f270a03a241d2285639f79854d04059d2c2c99f Original-Signed-off-by: Wenkai Du <wenkai.du@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/295048 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Robbie Zhang <robbie.zhang@intel.com> Original-Tested-by: Robbie Zhang <robbie.zhang@intel.com> Reviewed-on: http://review.coreboot.org/11432 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-08-29intel/kunimitsu: fix kepler probingWenkai Du
The patch was ported from commit: glados: fix kepler probing BUG=chrome-os-partner:44326 BRANCH=None TEST=Built and booted kunimitsu. lscpi shows the device on bus 2. Change-Id: I423e5d8414cb9864f6ff2f2ce7cd925baeb242eb Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Original-Commit-Id: 37bf5b7594a6784b3acb65410c670300e582e7aa Original-Original-change-Id: I7fe4a707f9321b7bdec4b4be729c5d0dcce65f6e Original-Originally-signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Originally-reviewed-on: https://chromium-review.googlesource.com/294810 Original-Change-Id: I2fb620ebff5b477a1a457a354c65229ad1092cae Original-Signed-off-by: Wenkai Du <wenkai.du@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/295164 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11431 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-08-29intel/kunimitsu: do gpio configuration in coreboot instead of fsprobbie zhang
BUG=chrome-os-partner:44336 BRANCH=None TEST=Built and booted kunimitsu. Validation shows no regressions. CQ-DEPEND=CL:294757 Change-Id: If4207e87cf22982162a8d5d47fa9e0509a2b2ab1 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Original-Commit-Id: 2f43fd6b7afc426d041a242a7e03dbf5800e1eee Original-Change-Id: Id8ce1bd2f28d32898e99008e2a602d99a5c1098c Original-Signed-off-by: Robbie Zhang <robbie.zhang@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/295012 Original-Reviewed-by: Wenkai Du <wenkai.du@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Wenkai Du <wenkai.du@intel.com> Reviewed-on: http://review.coreboot.org/11425 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-08-19Kunimitsu: Update Gpio table for kunimitsu FAB3 variantNaveen Krishna Chatradhi
This patch updates the GPIO table to support Kunimitsu FAB3 variant, based on SKL D0 MCP. BRANCH=None BUG=chrome-os-partner:43324 CQ-DEPEND=CL:*224327, CL:*224328 TEST=Built for kunimitsu; booted on kunimitsu with D0 MCP. Original-Change-Id: I2343187a919f6d29161069135d97484191198056 Original-Signed-off-by: Pravin Angolkar <pravin.k.angolkar@intel.com> Original-Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/289939 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I47302062788a90550fd38cb113e418b21d3f756c Signed-off-by: Pravin Angolkar <pravin.k.angolkar@intel.com> Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com> Reviewed-on: http://review.coreboot.org/11230 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-21Kunimitsu: Remove address from copyright noticeLee Leahy
Remove the address from the copyright notices. BRANCH=none BUG=None TEST=Build and run on Kunimitsu Change-Id: Ibe8196841d9e76c9ee3a3dbae802ecc63dc7904c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: cc12d2658324a375d02748098f0a2f4b5d1b5615 Original-Change-Id: I81a71e4ad9b8a66ad0e9a93cbeb512d90eb35906 Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/286266 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Commit-Queue: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Tested-by: Leroy P Leahy <leroy.p.leahy@intel.com> Reviewed-on: http://review.coreboot.org/11008 Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Tested-by: build bot (Jenkins)
2015-07-17mainboard/intel: Add Skylake based Kunimitsu boardLee Leahy
Initial files to support the Kunimitsu board. Matches chromium tree at 927026db This board uses the Skylake FSP 1.1 image and does not build without the FspUpdVpd.h file. BRANCH=none BUG=None TEST=Build and run ChromeOS on kunimitsu Change-Id: I1017a66bc811af51a0921e864b589ce2cb618082 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: http://review.coreboot.org/10836 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-30 06:51:42 +0000