summaryrefslogtreecommitdiff
path: root/src/mainboard/intel/kunimitsu/devicetree.cb
AgeCommit message (Collapse)Author
2017-08-25soc/intel/skylake: Add LPC and SPI lock down config optionSubrata Banik
This patch to provide new config options to perform LPC and SPI lock down either by FSP or coreboot. Remove EISS bit programming as well. TEST=Build and boot Eve and Poppy. Change-Id: If174915b4d0c581f36b54b2b8cd970a93c6454bc Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21068 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-13soc/intel/skylake: Split AC/DC settings for Deep Sx configDuncan Laurie
Currently when enabling Deep S3 or Deep S5 it unconditionally gets enabled in both DC and AC states. However since using Deep S3 disables some expected features like wake-on-USB it is not always desired to enable the same state in both modes. To address this split the setting and add a separate config for Deep Sx in AC and DC states. All motherboards that set this config were updated, but there is no actual change in behavior in this commit. BUG=b:36723679 BRANCH=none TEST=This commit has no runtime visible changes, I verified on Eve that the Deep SX config registers are unchanged, and it compiles for all affected boards. Change-Id: I590f145847785b5a7687f235304e988888fcea8a Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/19239 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-02-22acpi: Add ACPI_ prefix to IRQ enum and struct namesFurquan Shaikh
This is done to avoid any conflicts with same IRQ enums defined by other drivers. BUG=None BRANCH=None TEST=Compiles successfully Change-Id: I539831d853286ca45f6c36c3812a6fa9602df24c Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18444 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-28soc/intel/skylake: Add USB Port Over Current (OC) Pin programmingSubrata Banik
Program USB Overcurrent pins as per board schematics definition. BUG=none BRANCH=none TEST=Build and boot kunimitsu from USB device. Change-Id: I6aeb65953c753e09ad639469de7d866a54f42f11 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/17570 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-11-11soc/intel/skylake: move i2c voltage config to own variableAaron Durbin
In preparation of merging the lpss i2c config structures on apollolake and skylake move the i2c voltage variable to its own field. It makes refactoring things easier, and then there's no reason for a separate SoC specific i2c config structure. BUG=chrome-os-partner:58889 Change-Id: Ibcc3cba9bac3b5779351b673bc0cc7671d127f24 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17347 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-10-07x86/acpi_device: Add support for GPIO output polarityFurquan Shaikh
Instead of hard-coding the polarity of the GPIO to active high/low, accept it as a parameter in devicetree. This polarity can then be used while calling into acpi_dp_add_gpio to determine the active low status correctly. BUG=chrome-os-partner:55988 BRANCH=None TEST=Verified that correct polarity is set for reset-gpio on reef. Change-Id: I4aba4bb8bd61799962deaaa11307c0c5be112919 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/16877 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-09-15kunimitsu: Add FSP 2.0 support in romstageRizwan Qureshi
Populate mainboard related Memory Init Params i.e, SPD Rcomp values, DQ and DQs values. Change-Id: Id62c43a72a0e34fa2e8d177ce895d395418e2347 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16316 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-08skylake/devicetree: Add PIRQ Routing programmingBarnali Sarkar
Program PIRQ Routing with correct values, as done by FSP, and also in 'soc/intel/skylake/romstage/pch.c' file. If not done, these values get overridden by "0" during PxRC -> PIRQ programming in ramstage, in 'soc/intel/skylake/lpc.c' file pch_pirq_init()function. BUG=none BRANCH=none TEST=Build and boot kunimitsu Change-Id: Ibeb9a64824a71c253e45d6a1c6088abd737cf046 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/16044 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2016-07-28skylake/devicetree: Add LPC EC decode rangeSubrata Banik
Define LPC decode ranges for EC communication. BUG=chrome-os-partner:55357 BRANCH=none TEST=Built and boot kunimitsu to ensure no EC timeout error Change-Id: Idefdd79e67e89a794195c6821fee16550d1eda53 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/15898 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-24intel/kunimitsu: Move devices from mainboard.asl to devicetreeDuncan Laurie
Declare the mainboard attached devices in the devicetree and enable the provided device drivers by default to generate the ACPI objects for these devices. Then remove the static ACPI objects from the DSDT in mainboard.asl. This was tesed on a Chell mainboard since I lack a kunitmisu device. I used different GPIOs across boots to verify that the different audio codec devices would be "detected" and generated in the SSDT. Change-Id: I9b3b2247a84aeb7c07780958377d5bea14417ce6 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15317 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-06-09skylake: Move I2C bus configuration to separate structureDuncan Laurie
Move the existing I2C voltage configuration variable into a new structure that is equivalent, similar to how USB ports are configured. This is to make room for additional I2C configuration options like bus speed and whether to enable the bus in early boot which are coming in a subsequent commit. The affected mainboards are updated in this commit so it will build. Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: Id2dea3df93e49000d60ddc66eb35d06cca6dd47e Reviewed-on: https://review.coreboot.org/15104 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-05-09soc/intel/skylake: Enable another VR mailbox command for certain boardsSubrata Banik
Command List: Send command for PS4 exit fails BUG=chrome-os-partner:52355 BRANCH=glados TEST=Build and boot lars and verify no hang during active idle CQ-DEPEND=CL:*257305 Change-Id: I9ffae71b1a38433ffc48ee7be7e2a13e69ad5b87 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 96f00e2d153f92339c378ce256eb7ce6824e3368 Original-Change-Id: I320ae154f3f7145811b57258ddb61b3beb584273 Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/341330 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14688 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-01Skylake boards: Enabling HWP (hardware P state control)Subrata Banik
This patch provides config options to enable/disable Intel SST (Speed Shift Technology). BUG=chrome-os-partner:47517 BRANCH=None TEST=Booted kunimitsu/lars, verified HWP driver load successfully. CQ-DEPEND=CL:313107 Change-Id: I9419a754384f96d308a5ac2ad90bbb519edc296e Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Commit-Id: 5efb7978e9d3ca9a709a4793ad213423a1c3c45d Original-Change-Id: I328b074b4f56ebe3caa8952ce3df7f834c1cf40f Original-Signed-off-by: Robbie Zhang <robbie.zhang@intel.com> Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/326650 Original-Tested-by: Wenkai Du <wenkai.du@intel.com> Original-Reviewed-by: Benson Leung <bleung@chromium.org> Reviewed-on: https://review.coreboot.org/13843 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04skylake boards: disable ACPI PM TimerArchana Patni
These devicetree patches set the ACPI PM Disabled variable to 1. This will disable the ACPI PM timer and remove from FADT table. BRANCH=none BUG=chrome-os-partner:48646 TEST=Build for skylake board with the PmTimerDisabled policy in devicetree set to 1. iotools mmio_read32 0xfe0000fc should return 0x2. cat /sys/devices/system/clocksource/clocksource0/available_clocksource should list only "tsc hpet". acpi_pm should be removed from this list. Change-Id: Ia66f37e13f0f2f527651418b8b5c337b56c25c7f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: db3e8130495038850c7034b89701b4a5fcf88dce Original-Change-Id: Ib1b876cfa361b8cbdde2f9e212e3da4fd724e498 Original-Signed-off-by: Archana Patni <archana.patni@intel.com> Original-Signed-off-by: Subramony Sesha <subramony.sesha@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/319362 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13589 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-22intel/skylake: PL2 override changespchandri
Override the default PL2 values with ones recommended by Intel. BUG=chrome-os-partner:49292 BRANCH=glados TEST=MMIO 0x59A0[14-0] to find PL1 value (0x78) / 8 Watts = 15W MMIO 0x59A0[15] to find PL1 enable/disable = Disable MMIO 0x59A0[46-32] to find PL2 Value (0xC8) / 8 Watts = 25W Here PL2 is set to 25W and PL1 is disabled. CQ-DEPEND=CL:321392 Change-Id: I338b1d4879ae1b5f760e3c1d16e379a2baa1c965 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: fa6a115227385bef44abfacf58af306c16ed478a Original-Change-Id: I3bfc50256c9bdd522c984b11faf2903d7c44c81f Original-Signed-off-by: pchandri <preetham.chandrian@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/322454 Original-Commit-Ready: Venkateswarlu V Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Original-Tested-by: Venkateswarlu V Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Preetham Chandrian <preetham.chandrian@intel.com> Original-Reviewed-by: Venkateswarlu V Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Reviewed-on: https://review.coreboot.org/13071 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-19intel/kunimitsu: Set I2C[4] port voltage to 1.8vNaresh G Solanki
As the audio card needs 1.8V I2C operation. This patch adds entry into devicetree.cb to set I2C port 4 operate at 1.8V. Branch=None Bug=chrome-os-partner:47821 Test=Built & booted kunimitsu board. Verified that I2C port 4 is operating at 1.8V level CQ-DEPEND=CL:*242225, CL:*241206, CL:315167 Change-Id: Ida69b885737aef0cfcf6a6ca21b3650169e614d9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 990df9c1c65e75aae0a1329ead3790e78021b804 Original-Change-Id: Ifbb65e3d83561b52cc18e48b89d146c2f88f289b Original-Signed-off-by: Naresh G Solanki <Naresh.Solanki@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/315168 Original-Commit-Ready: Naresh Solanki <naresh.solanki@intel.com> Original-Tested-by: Robbie Zhang <robbie.zhang@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13010 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-19intel/kunimitsu: Enable FspSkipMpInit tokenRizwan Qureshi
MP init is already handled in coreboot, but it is also part of FSP FSP has a implemented a provision to allow FSP to skip MP init and let coreboot handle it. BRANCH=none BUG=chrome-os-partner:44805 TEST=Build and booted in kunimitsu with SkipMpInit enabled from CB. CQ-DEPEND=CL:310192 Change-Id: Idd9b1424f23765ce227005a322ac72d9e9fc841a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 5c52d0f0cc5d480c87fababc3316009e3ade6e45 Original-Change-Id: I9d92046d0237680b8d562814a9a605a36efb9516 Original-Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/312926 Original-Commit-Ready: Preetham Chandrian <preetham.chandrian@intel.com> Original-Tested-by: Preetham Chandrian <preetham.chandrian@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12992 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-19intel/skylake: Enable SaGv featureharidhar
This change enables SaGv feature for skylake platform.As a result of this patch the skylake platform will train memory at both low & high frequency points.This will be used to dynamically scale the work point (voltage/frequencies). The value "3" here means enable. Following is the table for same. 0=Disabled(SaGv disabled) 1=FixedLow(Fixed to low frequency) 2=FixedHigh(Fixed to High frequency) 3=Enabled(SaGv Enabled.Dynamically changes) BRANCH=None BUG=chrome-os-partner:48534 TEST=Built for kunimitsu. Tested on D1 silicon. Change-Id: I2892d631d64495e6aed453af4fd526f4bf5bed68 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8e09d1a22927f5fcddd6c0be3f9edf3dcb8729be Original-Change-Id: I32a7a53805068a52b381affaf061d69062cd8651 Original-Signed-off-by: haridhar <haridhar.kalvala@intel.com> Original-Signed-off-by: Somayaji, Vishwanath <vishwanath.somayaji@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/315806 Original-Commit-Ready: Haridhar Kalvala <haridhar.kalvala@intel.com> Original-Tested-by: Haridhar Kalvala <haridhar.kalvala@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Haridhar Kalvala <haridhar.kalvala@intel.com> Reviewed-on: https://review.coreboot.org/12997 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-18skylake boards: csme: add p2sb device and hecienabled devicetree variableArchana Patni
The HeciEnabled decides the state of Heci1 at end of boot. Setting to 0 (default) disables Heci1 and hides the device from OS. It internally uses the FSP Psf Unlock policy to disable the Heci1. It also adds the p2sb device in the devicetree which is necessary for hiding and unhiding the device. BRANCH=none BUG=chrome-os-partner:45618 TEST=build for kunimitsu. CQ-DEPEND=CL:*238451 Change-Id: Ieba2ab3b4ac518cce8371069028170ba99aaf079 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: cbefe9d6e9a981594534d346be67a5cd94483d05 Original-Change-Id: I8c95b5b9b28ba8441ca031f4e9ec523d913990d6 Original-Signed-off-by: Archana Patni <archana.patni@intel.com> Original-Signed-off-by: Subramony Sesha <subramony.sesha@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/311913 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12977 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-16intel/kunimitsu: remove/disable Wake on lanRizwan Qureshi
remove the WakeConfigWolEnableOverride to disable WOL override configuration in the General PM Configuration B (GEN_PMCON_B) register BRANCH=none BUG=none TEST=Build and booted in kunimitsu Change-Id: Ia523e7956c06c9f4a60e0a2296f771cc3c70bc25 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 12a07eebfb8fa4ee8013fbbb12283a0b429cacfd Original-Change-Id: I2be6c5b0114e4c7d8a7b9ceb59ee32f28f61769f Original-Reviewed-on: https://chromium-review.googlesource.com/316717 Original-Commit-Ready: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Tested-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12958 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-16intel/kunimitsu: Add VrConfig UPD parametersRizwan Qureshi
Cofigure VR settings for kunimitsu BRANCH=none BUG=chrome-os-partner:45387 TEST=Build and booted in kunimitsu CQ-DEPEND=CL:311317 Change-Id: Ib2afe7694d2a807cea1befa73349bd21a3e7d909 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: c3548d7cb3a00826377e819f20d07167b4eb2c65 Original-Change-Id: I6b80f509bc0ab6f65f26eec0651a3b44fb38fbf9 Original-Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/313068 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12945 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-15intel/kunimitsu: Add new configuration parametersRizwan Qureshi
Add new configuration parameters eg. #SLP_S3 assert width BRANCH=none BUG=chrome-os-partner:44075 TEST=Build and booted on kunimitsu, verified that CB is doing the Lockdowns which were previously done by FSP. CQ-DEPEND=CL:310869 Change-Id: I782df49bbf73c121b191f0661907173c4fd29b64 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: de0742869b1b148597d3714a3bc29a0dc08642aa Original-Change-Id: I2b4041cdc22a29e79d2ff7f2cc49f51f80da5567 Original-Reviewed-on: https://chromium-review.googlesource.com/313309 Original-Commit-Ready: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Tested-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12942 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-10-27intel/skylake: Clean up USB configuration in devicetreeDuncan Laurie
Instead of having many different arrays for USB configuration, with each array containing one bit of information, have one array containing all the information for each port. This way we can put the basic tuning parameters into a structure and then define structures for the basic supported configurations. The existing port definitions are taken from the Skylake HSIO tuning guide. BUG=chrome-os-partner:40635 BRANCH=none TEST=build and boot on glados, verify USB functionality in all ports. Change-Id: I5873dee011ae9e250b6654c73a7bd5c17681095b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 864040412b2d2923d3acbfca8055724887c58506 Original-Change-Id: Id518b1086abbe4a8c25d77fd4efc2d0de856bd5f Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/306734 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/12163 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-10-27intel/kunimitsu: USB Phy settings and Skip UART2 init in FSPRizwan Qureshi
FSP 1.7.0 provides UPD to configure USB phy settings update the same for kunimitsu. FSP 1.7.0 also provides UPD to indicate FSP not to reinitialise UART2 controller during MemoryInit. BRANCH=none BUG=chrome-os-partner:45684,chrome-os-partner:41374,chrome-os-partner:42284 TEST=build for Kunimitsu, boot on FAB3, Also checked for Boot from USB, Boot from eMMC, USB Audio, Onboard Audio, Touch, Wifi, S3 entry/resume CQ-DEPEND=CL:303661 Change-Id: Ie0a545c954f472cc822b63786d40399ec93d5166 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 90296e04942c70d972c225fc75dfab6de44d10ed Original-Change-Id: If79e81ef3323e782e96db307d89a01c14174b435 Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Signed-off-by: Rishavnath Satapathy <rishavnath.satapathy@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/304032 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/12145 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-17kunimitsu: Enable wake-on-wifiDuncan Laurie
- Assign GPE DW0 to GPP_B block - Enable GPP_B16 as ACPI_SCI for wake - Define PCIe WLAN device in ACPI with GPE0_DW0_16 for _PRW Note that current designs cannot wake from Deep S3 via wifi. BUG=chrome-os-partner:40635 BRANCH=none TEST=emerge-kunimitsu coreboot Change-Id: I1fe15a5a9b3d868a0e4f1bfb102b69f024c3aa48 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: de9dfee840246866a8dcca2e1c42c0292e820529 Original-Change-Id: I926d74b6bcf6d64c3db61ed23d7c17b51a98b052 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/298232 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11651 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-16kunimitsu: Disable Deep S3 on kunimitsu platformSubrata Banik
This patch will reset Deep S3 flag, hence S3 will work. BUG=chrome-os-partner:40635 BRANCH=None TEST=Build and Boot Kunimitsu and verify S3 is working. Change-Id: Iad87b7a8f7bf560861a270a8c19153cfc3850bc4 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: fbfaa29041be49e4c39d19cb94f01ad10d12c7d5 Original-Change-Id: I5ae1738c5de1bee1ad9a45ebde074a6a378492af Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/297903 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11643 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-10kunimitsu: Clean up mainboard code to match gladosDuncan Laurie
Clean up the intel/kunimitsu mainboard code to match the code and cleanups in glados. Many of these are trivial changes that do not impact things in a meaningful way but will make it easier to diff the code and keep the mainboards in sync. - use relative path for mainboard includes to make porting easier - fix trivial style issues to match glados so diffs are clean - pull GPIO configuration into gpio.h and use from there - remove thermal.h as it is not used on this board - make info message BIOS_INFO instead of BIOS_ERR - add support for SPD manufacturer and part number in SMBIOS BUG=chrome-os-partner:40635 BRANCH=none TEST=emerge-kunimitsu coreboot Change-Id: I64a053bcec0e0ff25a57f65659f391ab64d9a11a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e47f0fd3e00a665f07098c7ea0018d51b105d1be Original-Change-Id: Ib787f3ccc63115de48c4d608ca2bd81b58d24b6c Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/297752 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11576 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-09-08kunimitsu: Clean up devicetree.cbDuncan Laurie
Fix the PCI device list comments to be consistent between mainboards and remove unused and incorrect register settings. BUG=chrome-os-partner:40635 BRANCH=none TEST=emerge-kunimitsu coreboot Change-Id: Ib1c0eb80c57661502a4d4cfb4622a34effaa1c4a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 17c4f0d306194e7086f39f7ab560841999c318d8 Original-Change-Id: Ia1c138e52cbc3e81c0d12aa97d7f564e723d61f9 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/297339 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11562 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-09-08kunimitsu: Fix incorrect comment format in devicetree.cbDuncan Laurie
The devicetree.cb compiler can't handle C style /**/ comments, they need to be shell-style #. Due to a last minute formatting change in my commit to enable USB ports this broke the kunimitsu build. BUG=chrome-os-partner:44662 BRANCH=none TEST=emerge-kunimitsu coreboot Change-Id: I7a77f0f51345f779fcae43338cdc078bc91bb51c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 6454b377f865ec3d4e426fce3259f4df5d513ef5 Original-Change-Id: I19bde397018890db37257b55d0481e0c9f3a41f2 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/296302 Original-Tested-by: Wenkai Du <wenkai.du@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11554 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-09-08kunimitsu: Disable unused USB portsDuncan Laurie
Enable only the USB ports that are connected on-board or to an external port, all others will be disabled. BUG=chrome-os-partner:44662 BRANCH=none TEST=emerge-kunimitsu coreboot, change verified in schematic but not tested Change-Id: I909a6fab553bba829349dd08fa9cc3f26e5adeb2 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 1b0ce28d093e3b12273d7e0f56b47fb5b13d712f Original-Change-Id: I0c4b7de6e559595efa97d756e43f8398feccdffd Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/296036 Original-Commit-Ready: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11549 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-08-27kunimitsu: Enable SMBus device in devicetreeNaveen Krishna Chatradhi
this patch enables SMBus in device tree for kunimitsu board. BRANCH=none BUG=none TEST=built for kunimitsu; booted on kunimitsu fab3 and verified with lspci Original-Change-Id: I3b2b8c202b71c2a0c602169841978ed0c4d8bf8d Original-Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/292971 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: Id20e6cafda8664bd0ae3a5acecdd66c58c220694 Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com> Reviewed-on: http://review.coreboot.org/11276 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-27Kunimitsu: enable deep S5Naveen Krishna Chatradhi
This patche enables the deep S5 and disables Deep S3. Kunimitsu does not resume from deep S3. This change will unblock the S3 resume path on kunimitsu board. BRANCH=None BUG=chrome-os-partner:42331 TEST=Built and booted on kunimitsu; check s3 works. Original-Change-Id: Ia828a39bceef615fd194bb3614ba2de87c3af805 Original-Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/291250 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I07b95a324a27ab658e80674686b47b86412ea097 Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com> Reviewed-on: http://review.coreboot.org/11274 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-19Kunimitsu: Fix Wifi, kepler RP mapping and enable ClkReqSupportPratik Prajapati
(1) Wifi is connected on RP1 which is 1c.0 , so enabling 1c.0 and disabling 1d.0 (2) kepler is on RP5 which is 1c.4, so enabling it (3) enabling ClkReqSupport for RP1 and RP5 so that L1 substates can get enabled. BRANCH=None BUG=chrome-os-partner:43738 TEST=Built and boot for Kunimitsu. checked all PCIe powersaving states (LTR, L1, L1S) are enabled Original-Change-Id: I525661399d1a4d939b53d5ed5f7991598b84ddcd Original-Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/293482 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: Ib9a771a6ec137217668fb0385efc13b1824772b4 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: http://review.coreboot.org/11237 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-19Kunimitsu: Enable root ports and clkreqsPravin Angolkar
This patch enables the root ports and configures the clock req numbers as per the design On kunimitsu FAB3 board with D0 MCP Root port 1 --> Wifi card --> clkreq 1 Root port 4 --> Kepler VP8/VP9--> clkreq 2 BRANCH=None BUG=chrome-os-partner:43324 CQ-DEPEND=CL:*224327, CL:*224328 TEST=Built for Kunimitsu and Boot Kunimitsu board with D0 MCP Original-Change-Id: I4e110d2d07efbfa7a306852301cd1cd89027b2ba Original-Signed-off-by: Pravin Angolkar <pravin.k.angolkar@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/290051 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Naveenkrishna Ch <naveenkrishna.ch@intel.com> Original-Tested-by: Naveenkrishna Ch <naveenkrishna.ch@intel.com> Change-Id: I6d66c78496ac3f43e07d96feefed35cf50da6aa1 Signed-off-by: Pravin Angolkar <pravin.k.angolkar@intel.com> Reviewed-on: http://review.coreboot.org/11232 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-14skylake: remove ec_smi_gpio and alt_gp_smi_enAaron Durbin
The ec_smi_gpio and alt_gp_smi_en devicetree options are goign to be removed. The plan for skylake is to set the settings by the mainboard through either gpio pad configuration or through helper functions. Moreover, these values only allow *1* SMI GPIO configuration in that the following has to be true: alt_gp_smi_en = 1 << (ec_smi_gpio % 24) If not, then another gpio(s) from the same group has the SMI_EN bit set for it. Lastly, remove all the subsequent dependencies as they are no longer used: enable_alt_smi() and gpio_enable_group(). BUG=chrome-os-partner:43778 BRANCH=None TEST=None Original-Change-Id: I749a499c810d83de522a2ccce1dd9efb0ad2e20a Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/291931 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I2e1cd6879b76923157268a1449c617ef2aada9c4 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11204 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14kunimitsu sklrvp: remove unused IedSizeAaron Durbin
The skylake code is using IED_REGION_SIZE instead of devicetree.cb. Drop the the option from the device trees. BUG=chrome-os-partner:43636 BRANCH=None TEST=None Original-Change-Id: Ib252266060fbc6ed0eeaac19a6b79c173c6c9a13 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/290932 Original-Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Trybot-Ready: David James <davidjames@chromium.org> Change-Id: Ib08628e163ac27d4c49eddcbec6cab3252abd4aa Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11200 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-21kunimitsu: Update Serial IO modes in devicetreeNaveen Krishna Chatradhi
This patch updates the Serial IO modes for UART 1 and 2 in devicetree for kunimitsu boards. UART1 are disabled and UART2 is in PCI mode. BRANCH=None BUG=chrome-os-partner:40857 TEST=Built for kunimitsu and tested LPSS logs on Kunimitsu. Change-Id: I5a46ab9e0b792478ee2e0845aeab1443423a2fac Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 38c7b963a9d679ee5106c5343e1173d0b5056627 Original-Change-Id: I39cbb6bb0991e5f9b3365adaf6b24818d112cd1a Original-Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/284825 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Wenkai Du <wenkai.du@intel.com> Original-Tested-by: Wenkai Du <wenkai.du@intel.com> Reviewed-on: http://review.coreboot.org/11001 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-17mainboard/intel: Add Skylake based Kunimitsu boardLee Leahy
Initial files to support the Kunimitsu board. Matches chromium tree at 927026db This board uses the Skylake FSP 1.1 image and does not build without the FspUpdVpd.h file. BRANCH=none BUG=None TEST=Build and run ChromeOS on kunimitsu Change-Id: I1017a66bc811af51a0921e864b589ce2cb618082 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: http://review.coreboot.org/10836 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 16:31:49 +0000