summaryrefslogtreecommitdiff
path: root/src/mainboard/intel/kunimitsu/devicetree.cb
AgeCommit message (Expand)Author
2024-06-26skl mainboards/dt: Move genx_dec settings into LPC device scopeFelix Singer
2024-06-26skl mainboards/dt: Move usb{2,3}_ports settings into XHCI device scopeFelix Singer
2024-06-23skl mainboards: Move cpu_cluster device to chipset devicetreeFelix Singer
2023-11-13mb/intel/kunimitsu: Make use of the chipset devicetreeFelix Singer
2023-10-27mb/intel/skylake/devicetree: Use comma separated list for arraysFelix Singer
2023-10-25devicetrees: Remove trailing backslash from multiline valuesFelix Singer
2023-01-30mb/*: Remove lapic from devicetreeArthur Heymans
2022-01-16soc/intel/skl: Replace dt `HeciEnabled` by `HECI1 disable` configSubrata Banik
2021-08-28soc/intel/common: Use CHIPSET_LOCKDOWN_COREBOOT by defaultFelix Singer
2021-03-01soc/intel/skylake: Clean up SD GPIO handlingAngel Pons
2020-11-13soc/intel/{skl,cnl}: replace PM ACPI timer dt option by KconfigMichael Niewöhner
2020-10-26mb/*,soc/intel: drop the obsolete dt option `speed_shift_enable`Michael Niewöhner
2020-10-13mb, soc/intel: Switch to using drivers/wifi/generic for Intel WiFi devicesFurquan Shaikh
2020-08-08soc/intel/skylake: Enable SDXC depending on devicetree configurationFelix Singer
2020-08-07soc/intel/skylake: Enable thermal subsystem depending on devicetreeFelix Singer
2020-07-29soc/intel/skylake: Enable HDA depending on devicetree configurationFelix Singer
2020-07-29soc/intel/skylake: Enable eMMC depending on devicetree configurationFelix Singer
2020-07-29soc/intel/skylake: Enable SMBus depending on devicetree configurationFelix Singer
2020-07-26skylake boards: Factor out copy-pasted PIRQ routesAngel Pons
2020-05-18skylake: update processor power limits configurationSumeet R Pawnikar
2020-03-20drivers/generic/max98357a: Allow custom _HID from configAamir Bohra
2020-03-10mb/intel/{saddlebrook,kunimitsu}: Add macro for SaGv configPraveen Hodagatta Pranesh
2019-10-21mb/intel/kunimitsu: drop support for FSP 1.1Michael Niewöhner
2019-04-06{mb,soc/intel/skylake}: remove unused InternalGfxMaxim Polyakov
2019-03-01soc/intel/skylake: Unify serial IRQ optionsNico Huber
2019-02-18soc/intel/skylake: Use real common code for VMX initNico Huber
2018-06-06soc/intel/common/block: Add common chip config blockSubrata Banik
2018-06-05soc/intel/skylake: Add option to skip coreboot MP initSubrata Banik
2017-08-25soc/intel/skylake: Add LPC and SPI lock down config optionSubrata Banik
2017-04-13soc/intel/skylake: Split AC/DC settings for Deep Sx configDuncan Laurie
2017-02-22acpi: Add ACPI_ prefix to IRQ enum and struct namesFurquan Shaikh
2016-11-28soc/intel/skylake: Add USB Port Over Current (OC) Pin programmingSubrata Banik
2016-11-11soc/intel/skylake: move i2c voltage config to own variableAaron Durbin
2016-10-07x86/acpi_device: Add support for GPIO output polarityFurquan Shaikh
2016-09-15kunimitsu: Add FSP 2.0 support in romstageRizwan Qureshi
2016-08-08skylake/devicetree: Add PIRQ Routing programmingBarnali Sarkar
2016-07-28skylake/devicetree: Add LPC EC decode rangeSubrata Banik
2016-06-24intel/kunimitsu: Move devices from mainboard.asl to devicetreeDuncan Laurie
2016-06-09skylake: Move I2C bus configuration to separate structureDuncan Laurie
2016-05-09soc/intel/skylake: Enable another VR mailbox command for certain boardsSubrata Banik
2016-03-01Skylake boards: Enabling HWP (hardware P state control)Subrata Banik
2016-02-04skylake boards: disable ACPI PM TimerArchana Patni
2016-01-22intel/skylake: PL2 override changespchandri
2016-01-19intel/kunimitsu: Set I2C[4] port voltage to 1.8vNaresh G Solanki
2016-01-19intel/kunimitsu: Enable FspSkipMpInit tokenRizwan Qureshi
2016-01-19intel/skylake: Enable SaGv featureharidhar
2016-01-18skylake boards: csme: add p2sb device and hecienabled devicetree variableArchana Patni
2016-01-16intel/kunimitsu: remove/disable Wake on lanRizwan Qureshi
2016-01-16intel/kunimitsu: Add VrConfig UPD parametersRizwan Qureshi
2016-01-15intel/kunimitsu: Add new configuration parametersRizwan Qureshi
2015-10-27intel/skylake: Clean up USB configuration in devicetreeDuncan Laurie
2015-10-27intel/kunimitsu: USB Phy settings and Skip UART2 init in FSPRizwan Qureshi
2015-09-17kunimitsu: Enable wake-on-wifiDuncan Laurie
2015-09-16kunimitsu: Disable Deep S3 on kunimitsu platformSubrata Banik
2015-09-10kunimitsu: Clean up mainboard code to match gladosDuncan Laurie
2015-09-08kunimitsu: Clean up devicetree.cbDuncan Laurie
2015-09-08kunimitsu: Fix incorrect comment format in devicetree.cbDuncan Laurie
2015-09-08kunimitsu: Disable unused USB portsDuncan Laurie
2015-08-27kunimitsu: Enable SMBus device in devicetreeNaveen Krishna Chatradhi
2015-08-27Kunimitsu: enable deep S5Naveen Krishna Chatradhi
2015-08-19Kunimitsu: Fix Wifi, kepler RP mapping and enable ClkReqSupportPratik Prajapati
2015-08-19Kunimitsu: Enable root ports and clkreqsPravin Angolkar
2015-08-14skylake: remove ec_smi_gpio and alt_gp_smi_enAaron Durbin
2015-08-14kunimitsu sklrvp: remove unused IedSizeAaron Durbin
2015-07-21kunimitsu: Update Serial IO modes in devicetreeNaveen Krishna Chatradhi
2015-07-17mainboard/intel: Add Skylake based Kunimitsu boardLee Leahy