summaryrefslogtreecommitdiff
path: root/src/mainboard/intel/kblrvp/variants
AgeCommit message (Collapse)Author
2020-07-29soc/intel/skylake: Enable HDA depending on devicetree configurationFelix Singer
Currently HDA gets enabled by the option EnableAzalia, but this duplicates the devicetree on/off options. Therefore use the on/off options for the enablement of the HDA controller. I checked all corresponding mainboards if the devicetree configuration matches the EnableAzalia setting. Change-Id: Id20d023b2f286753fb223050292c7514632e1dd3 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43866 Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-29soc/intel/skylake: Enable HECI3 depending on devicetree configurationFelix Singer
Currently HECI3 gets enabled by the option Heci3Enabled, but this duplicates the devicetree on/off options. Therefore use the on/off options for the enablement of the HECI3 controller. I checked all corresponding mainboards if the devicetree configuration matches the Heci3Enabled setting. Change-Id: I4f99d434dfee49a9783e38c3910b9391d479cb83 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43864 Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-29soc/intel/skylake: Enable eMMC depending on devicetree configurationFelix Singer
Currently eMMC gets enabled by the option ScsEmmcEnabled, but this duplicates the devicetree on/off options. Therefore use the on/off options for the enablement of the eMMC controller. I checked all corresponding mainboards if the devicetree configuration matches the ScsEmmcEnabled setting. Change-Id: I3b86ff6e2f15991fb304b71d90c1b959cb6fcf43 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43862 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-07-29soc/intel/skylake: Enable SMBus depending on devicetree configurationFelix Singer
Currently SMBus gets enabled by the option SmbusEnable, but this duplicates the devicetree on/off options. Therefore use the on/off options for the enablement of the SMBus controller. I checked all corresponding mainboards if the devicetree configuration matches the SmbusEnable setting. Change-Id: I0d9ec1888c82cc6d5ef86d0694269c885ba62c41 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43845 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-07-29soc/intel/skylake: Enable LAN depending on devicetree configurationFelix Singer
Currently LAN gets enabled by the option EnableLan, but this duplicates the devicetree on/off options. Therefore use the on/off options for the enablement of the LAN controller. I checked all corresponding mainboards if the devicetree configuration matches the EnableLan setting. Change-Id: I36347e8e0f0ddba47aec52aeb6bc047e3c8bfaa4 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43844 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-07-29soc/intel/skylake: Enable SATA depending on devicetree configurationFelix Singer
Currently SATA gets enabled by the option EnableSata, but this duplicates the devicetree on/off options. Therefore use the on/off options for the enablement of the SATA controller. I checked all corresponding mainboards if the devicetree configuration matches the EnableSata setting. Change-Id: I217dcb7178f29bbdeada54bdb774166126b47a5a Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43843 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-07-26skylake boards: Factor out copy-pasted PIRQ routesAngel Pons
Put them in common code just in case something depends on the values. Change-Id: Ief526efcbd5ba5546572da1bc6bb6d86729f4e54 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43851 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18skylake: update processor power limits configurationSumeet R Pawnikar
Update processor power limit configuration parameters based on common code base support for Intel Skylake SoC based platforms. BRANCH=None BUG=None TEST=Built and tested on nami system Change-Id: Idc82f3d2f805b92fb3005d2f49098e55cb142e45 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41238 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-05-11treewide: Remove "this file is part of" linesPatrick Georgi
Stefan thinks they don't add value. Command used: sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool) The exceptions are for: - crossgcc (patch file) - gcov (imported from gcc) - elf.h (imported from GNU's libc) - nvramtool (more complicated header) The removed lines are: - fmt.Fprintln(f, "/* This file is part of the coreboot project. */") -# This file is part of a set of unofficial pre-commit hooks available -/* This file is part of coreboot */ -# This file is part of msrtool. -/* This file is part of msrtool. */ - * This file is part of ncurses, designed to be appended after curses.h.in -/* This file is part of pgtblgen. */ - * This file is part of the coreboot project. - /* This file is part of the coreboot project. */ -# This file is part of the coreboot project. -# This file is part of the coreboot project. -## This file is part of the coreboot project. --- This file is part of the coreboot project. -/* This file is part of the coreboot project */ -/* This file is part of the coreboot project. */ -;## This file is part of the coreboot project. -# This file is part of the coreboot project. It originated in the - * This file is part of the coreinfo project. -## This file is part of the coreinfo project. - * This file is part of the depthcharge project. -/* This file is part of the depthcharge project. */ -/* This file is part of the ectool project. */ - * This file is part of the GNU C Library. - * This file is part of the libpayload project. -## This file is part of the libpayload project. -/* This file is part of the Linux kernel. */ -## This file is part of the superiotool project. -/* This file is part of the superiotool project */ -/* This file is part of uio_usbdebug */ Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-06mainboard/intel: Use SPDX for GPL-2.0-only filesAngel Pons
Done with sed and God Lines. Only done for C-like code for now. Change-Id: I1ea2eebfdd43610e42b4cf04409ec76c2e8b0042 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40082 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-18mainboard/[g-p]*: Remove copyright noticesPatrick Georgi
They're listed in AUTHORS and often incorrect anyway, for example: - What's a "Copyright $year-present"? - Which incarnation of Google (Inc, LLC, ...) is the current copyright holder? - People sometimes have their editor auto-add themselves to files even though they only deleted stuff - Or they let the editor automatically update the copyright year, because why not? - Who is the copyright holder "The coreboot project Authors"? - Or "Generated Code"? Sidestep all these issues by simply not putting these notices in individual files, let's list all copyright holders in AUTHORS instead and use the git history to deal with the rest. Change-Id: I426518e8e18de1c8efcfb7ecb0835df3e257dca1 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39608 Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-09mb/intel/kblrvp: Remove hex values from VR settingsWim Vervoorn
Change the hex values in the VR configuration tables of the Intel Kaby Lake RVP boards to the same style that is used in the other mainboards. Also, correct some numbers in the comment tables that did not match the register values. The values in the tables haven't changed. BUG=N/A TEST=build Change-Id: I77af544d7d88143e19abedb12a13627779c705c6 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37550 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-02soc/intel/skylake: devicetree: introduce PchHdaVcType fsp parameterMichael Niewöhner
Make the the FSP Parameter PchHdaVcType a devicetree setting and make use of it in the devicetrees of all boards that currently set it. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: Ibafc3b6bd2495658f2bd634218042ec413a89f5e Reviewed-on: https://review.coreboot.org/c/coreboot/+/35542 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2019-04-06{mb,soc/intel/skylake}: remove unused InternalGfxMaxim Polyakov
The InternalGfx option in devicetree.cb is not used to enable iGPU. The patch removes this option from chip.h and mb/*/devicetree.cb files for all boards with skl/kbl processor. Change-Id: I41ecca3fdfb1d4b20ee634a13263ff481dcf440e Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32171 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-03-01soc/intel/skylake: Unify serial IRQ optionsNico Huber
We had two ways to configure the serial IRQ mode. One time in the devicetree for FSP and one time through Kconfig for coreboot. We'll use `enum serirq_mode` from soc/intel/common/ as a devicetree option instead. As the default is `quiet mode` here and that is the most common mode, this saves us a lot of lines. In four cases kblrvp8, 11 and librem 13v2, 15v3, we had conflicting settings in devicetree and Kconfig. We'll maintain the `continuous` selection, although it might be that coreboot overrode this earlier on the kblrvps. Note: A lot of Google boards have serial IRQ enabled, while the pin seems to be unconnected? Change-Id: I79f0cd302e335d8dcf8bf6bc32f3d40ca6713e5c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/31596 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-02-18soc/intel/skylake: Use real common code for VMX initNico Huber
Use the common VMX implementation, and set IA32_FEATURE_CONTROL lock bit per Kconfig *after* SGX is configured (as SGX also sets bits on the IA32_FEATURE_CONTROL register). As it is now correctly based on a Kconfig, the `VmxEnable` devicetree setting vanishes. Test: build/boot google/[chell,fizz], observe Virtualization enabled under Windows 10 when VMX enabled and lock bit set. Change-Id: Iea598cf74ba542a650433719f29cb5c9df700c0f Signed-off-by: Nico Huber <nico.h@gmx.de> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/29682 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-16mb/intel/kblrvp: Add new Kaby lake RVP11 supportPraveen hodagatta pranesh
The RVP11 is a dual-channel DDR4 SO-DIMM on skylake H platform. This patch add following chages - Add overridetree.cb for RVP11 - Select skylake PCH-H chipset config for RVP11. - Add GPIO table as per board schematics. - Add audio verb table for RVP11. - Set the UserBd UPD to BOARD_TYPE_DESKTOP. BUG=None TEST= Build and flash, confirm boot into yocto OS on KBL RVP11 platform. verified PCI, USB, ethernet, SATA, display, audio and power functionalities. Signed-off-by: Praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com> Change-Id: Id86f56df06795601cc9d7830766e54396d218e00 Reviewed-on: https://review.coreboot.org/c/29809 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-09mb/intel/kblrvp: Enable overridetree support for variantsPraveen hodagatta pranesh
This patch add devicetree.cb in baseboard and overridetree.cb for RVP3, RVP7 and RVP8 variants. BUG= None TEST= build with BUILD_TIMELESS=1, static.c remains same on before & after enabling overridetree. Signed-off-by: Praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com> Change-Id: Ib7d492e2a92aed10ad0426d57640d0ed56733847 Reviewed-on: https://review.coreboot.org/c/30623 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-06-06soc/intel/common/block: Add common chip config blockSubrata Banik
Adding common chip config structure which will be used to return data to common code. When common code requires soc data, code used to fetch entire soc config structure. With this change, common code will only get the data/structure which is required by common code and not entire config. For now, adding i2c, gspi and lockdown configuration which will be used by common code. BUG=none BRANCH=b:78109109 TEST=compile code for APL/SKL/CNL. Boot using SKL/APL/CNL and check values are returned properly using common structure. Change-Id: I7f1671e064782397d3ace066a08bf1333192b21a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/26189 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Hannah Williams <hannah.williams@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-05soc/intel/skylake: Add option to skip coreboot MP initSubrata Banik
This patch provides option for mainboard to skip coreboot MP initialization if required based on use_fsp_mp_init. Option for mainboard to skip coreboot MP initialization * 0 = Make use of coreboot MP Init * 1 = Make use of FSP MP Init Default coreboot does MP initialization. Change-Id: I8de24e662963f4600209ad1b110dc950ecfb3a27 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/26818 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-08mb/intel/kblrvp: Enable Kabylake RVP8V Sowmya
Add support for KBL RVP8 board * Add KBL RVP8 support in Konfig. * Add KBL RVP8 config option in make menuconfig. * Add descriptor and ME binary paths for RVP8 in Kconfig. * Add RVP8 board name Kconfig.name. * Add devicetree.cb for RVP8 in the variants path. * Add gpio.h for RVP8 in variants/include/variant path. TEST= Build and boot RVP8. Change-Id: I6ba177c223f6aa3285c0fe5eba0cd55b2a50c4ed Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/23383 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2017-12-22soc/intel/skylake: Add PcieRpClkSrcNumber UPD configuartion supportDivya Chellap
New UPD PcieRpClkSrcNumber introduced in FSP V2.9.2 to configure clock source number of PCIe root ports. This UPD array is set to clock source number(0-6) for all the enabled PCIe root ports, invalid(0x1F) is set for disabled PCIe root ports. BUG=b:70252901 BRANCH=None TEST= Perform the following 1. Build and boot soraka 2. Verify PCIe devices list using lspci command 3. Perform Basic Assurance Test(BAT) on soraka Change-Id: I95ca0d893338100b7e4d7d0b76c076ed7e2b040e Signed-off-by: Divya Chellap <divya.chellappa@intel.com> Reviewed-on: https://review.coreboot.org/22947 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-10-09skylake mainboards: Use PAD_CFG_GPI_GPIO_DRIVER instead of PAD_CFG_GPIFurquan Shaikh
Change 1760cd3e (soc/intel/skylake: Use common/block/gpio) updated all skylake boards to use common gpio driver. Common gpio code defines PAD_CFG_GPI without GPIO_DRIVER ownership. However, for skylake PAD_CFG_GPI set GPIO_DRIVER ownership by default. This resulted in Linux kernel failing to configure all GPIO IRQs since the ownership was not set correctly. (Observed error in dmesg: "genirq: Setting trigger mode 3 for irq 201 failed (intel_gpio_irq_type+0x0/0x110)") This change fixes the above issue by replacing all uses of PAD_CFG_GPI in skylake mainboards to PAD_CFG_GPI_GPIO_DRIVER. BUG=b:67507004 TEST=Verified on soraka that the genirq error is no longer observed in dmesg. Also, cat /proc/interrupts has the interrupts configured correctly. Change-Id: I7dab302f372e56864432100a56462b92d43060ee Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21912 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25soc/intel/skylake: Add LPC and SPI lock down config optionSubrata Banik
This patch to provide new config options to perform LPC and SPI lock down either by FSP or coreboot. Remove EISS bit programming as well. TEST=Build and boot Eve and Poppy. Change-Id: If174915b4d0c581f36b54b2b8cd970a93c6454bc Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21068 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-27mainboard/intel/kblrvp: Add MIPI camera supportV Sowmya
This patch adds mipi_camera.asl and enables I2C2, I2C3, CIO2 and IMGU devices, * Add TPS68470 PMIC1 and PMIC2 related ACPI objects. * Add OV cameras related ACPI objects. * Add Dongwoon AF DAC related ACPI objects. * SSDB: Sensor specific database for camera sensor. * CAMD: ACPI object to specify the camera device type. KBLRVP has two PMIC's sitting on I2C2 and I2C3. CAM0 and CAM1 power requirements are handled by PMIC1 and PMIC2 respectively. BUG=none BRANCH=none TEST=Build and boot kblrvp. Dump and verify that the generated DSDT table has the required entries. Change-Id: Ibaf26dad74ca1e7c9f415ae75c4ed8558ad99e2f Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/20661 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-07-24Fix files with multiple newlines at the end.Martin Roth
Change-Id: Iaab26033e947cb9cf299faf1ce6d40a90a9facbe Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20704 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-07-12mb/intel/kblrvp: Enable HD Audio for rvp3V Sowmya
Enable Azalia controller, HD Audio DSP and select the HDAudio IoBuffer Ownership for rvp3. Check if device is enabled in HDA codec init function to avoid failure when Azalia controller is disabled in the devicetree.cb. BUG=None TEST=Build for kblrvp3, Make sure booting is fine irrespective of HDA enable/disable. Change-Id: I87212fe16ecc6053d6d00372904a5fd5d6f6b209 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/20530 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-05-01intel/kblrvp: Enable audio in RVP7 and RVP3Naresh G Solanki
Enable audio: * Add verb table for ALC286 & ALC298 * Enable virtual channel 1 for DmiVc1 & HdaVc1. TEST= Build for kblrvp3 as well as kblrvp7. Boot to OS & verified working of audio on both the boards. Change-Id: Id27e3cf585b93ed4131d7bf3d3b53d3f5404b18e Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/18875 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-04-13soc/intel/skylake: Split AC/DC settings for Deep Sx configDuncan Laurie
Currently when enabling Deep S3 or Deep S5 it unconditionally gets enabled in both DC and AC states. However since using Deep S3 disables some expected features like wake-on-USB it is not always desired to enable the same state in both modes. To address this split the setting and add a separate config for Deep Sx in AC and DC states. All motherboards that set this config were updated, but there is no actual change in behavior in this commit. BUG=b:36723679 BRANCH=none TEST=This commit has no runtime visible changes, I verified on Eve that the Deep SX config registers are unchanged, and it compiles for all affected boards. Change-Id: I590f145847785b5a7687f235304e988888fcea8a Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/19239 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-03-15intel/skylake: Fix bug in VR configuration with FSP 2.0Duncan Laurie
With the move to FSP 2.0 the number of VR types supported was reduced to 4, and the VR_RING type is no longer present. This means all existing boards using FSP 2.0 are incorrectly passing VR configuration into FSP as the values corresponding to "GT Sliced" and "GT Unsliced" have changed. Fix this by updating the skylake SOC VR handling to account for changes in the FSP configuration and no longer provide VR_RING type when using FSP 2.0. BUG=b:36228330 BRANCH=none TEST=manual: build and boot on Eve Change-Id: I59eea9fba006a4c235d7b42d07fdc6e4f44f7351 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18818 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-12-03mainboard/intel/kblrvp: Enabling Kaby Lake RVP7Barnali Sarkar
Add support for Kaby Lake RVP7 board * Add RVP7 board support in Kconfig * Override default descriptor and ME binary paths in Kconfig since those binaries will differ for RVP3 and RVP7 * Add RVP7 board name in board_info.txt and Kconfig.name * Add devicetree.cb for RVP7 in the variants path * Add gpio.h for RVP7 in variants/include/variant path * Made board specific code for retrieving spd, i.e., in RVP7 there is non-soldered DIMMs, so SPD is read through smbus, unlike RVP3 where memory DIMMs are soldered down with board. Hence for RVP3, the spd binaries will be fixed and can be kept as binary file in cbfs. BUG=none BRANCH=none TEST=Built and boot Kaby Lake RVP7 Change-Id: I6f3d17d857bad1b5cf39f0bc900c760fee72da48 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/17637 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-30mb/intel/kblrvp: Add Variant board support for KBLRVPBarnali Sarkar
Add support of Variant board model for existing intel/kblrvp, since there might be more RVP board supports under intel/kblrvp. Existing is for KBL RVP3 board. BUG=none BRANCH=none TEST=Built and boot Kaby Lake RVP3 Change-Id: I041a07a273dbb77e422d48591f06b5f1011cd9f7 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/17630 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 15:57:01 +0000