summaryrefslogtreecommitdiff
path: root/src/mainboard/intel/galileo
AgeCommit message (Collapse)Author
2017-09-20vboot: reset vbnv in cmos when cmos failure occursAaron Durbin
There's an occasional issue on machines which use CMOS for their vbnv storage. The machine that just powers up from complete G3 would have had their RTC rail not held up. The contents of vbnv in CMOS could pass the crc8 though the values could be bad. In order to fix this introduce two functions: 1. vbnv_init_cmos() 2. vbnv_cmos_failed() At the start of vboot the CMOS is queried for failure. If there is a failure indicated then the vbnv data is restored from flash backup or reset to known values when there is no flash backup. BUG=b:63054105 Change-Id: I8bd6f28f64a116b84a08ce4779cd4dc73c0f2f3d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/21560 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-08-18include/device: Split i2c.h into threeNico Huber
Split `i2c.h` into three pieces to ease reuse of the generic defi- nitions. No code is changed. * `i2c.h` - keeps the generic definitions * `i2c_simple.h` - holds the current, limited to one controller driver per board, devicetree independent I2C interface * `i2c_bus.h` - will become the devicetree compatible interface for native I2C (e.g. non-SMBus) controllers Change-Id: I382d45c70f9314588663e1284f264f877469c74d Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20845 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-18vboot: Remove get_sw_write_protect_state callbackJulius Werner
We've just decided to remove the only known use of the VBSD_SW_WP flag in vboot (https://chromium-review.googlesource.com/c/575389), since it was unused and never reliable on all platforms anyway. Therefore, we can now also remove the coreboot infrastructure that supported it. It doesn't really hurt anyone, but removing it saves a small bit of effort for future platforms. Change-Id: I6706eba2761a73482e03f3bf46343cf1d84f154b Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/20628 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-12commonlib: Move drivers/storage into commonlib/storageLee Leahy
Move drivers/storage into commonlib/storage to enable access by libpayload and indirectly by payloads. * Remove SD/MMC specific include files from include/device * Remove files from drivers/storage * Add SD/MMC specific include files to commonlib/include * Add files to commonlib/storage * Fix header file references * Add subdir entry in commonlib/Makefile.inc to build the SD/MMC driver * Add Kconfig source for commonlib/storage * Rename *DEVICE* to *COMMONLIB* * Rename *DRIVERS_STORAGE* to *COMMONLIB_STORAGE* TEST=Build and run on Galileo Gen2 Change-Id: I4339e4378491db9a0da1f2dc34e1906a5ba31ad6 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/19672 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-05-08mainboard/intel/galileo: Add SD controller configurationLee Leahy
Configure the SD controller to handle the SD card slot. * Galileo supports a removable SD card slot. * Set SD card initialization frequency to 100 MHz. * Set default removable delays. * Build SD/MMC components by default TEST=Build and run on Galileo Gen2 Change-Id: Iaf4faa40fe01eca98abffa2681f61fd8e059f0c4 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/19212 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-28vboot: Move remaining features out of vendorcode/google/chromeosJulius Werner
This patch attempts to finish the separation between CONFIG_VBOOT and CONFIG_CHROMEOS by moving the remaining options and code (including image generation code for things like FWID and GBB flags, which are intrinsic to vboot itself) from src/vendorcode/google/chromeos to src/vboot. Also taking this opportunity to namespace all VBOOT Kconfig options, and clean up menuconfig visibility for them (i.e. some options were visible even though they were tied to the hardware while others were invisible even though it might make sense to change them). CQ-DEPEND=CL:459088 Change-Id: I3e2e31150ebf5a96b6fe507ebeb53a41ecf88122 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18984 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-28vboot: Assume EC_SOFTWARE_SYNC and VIRTUAL_DEV_SWITCH by defaultJulius Werner
The virtualized developer switch was invented five years ago and has been used on every vboot system ever since. We shouldn't need to specify it again and again for every new board. This patch flips the Kconfig logic around and replaces CONFIG_VIRTUAL_DEV_SWITCH with CONFIG_PHYSICAL_DEV_SWITCH, so that only a few ancient boards need to set it and it fits better with CONFIG_PHYSICAL_REC_SWITCH. (Also set the latter for Lumpy which seems to have been omitted incorrectly, and hide it from menuconfig since it's a hardware parameter that shouldn't be configurable.) Since almost all our developer switches are virtual, it doesn't make sense for every board to pass a non-existent or non-functional developer mode switch in the coreboot tables, so let's get rid of that. It's also dangerously confusing for many boards to define a get_developer_mode() function that reads an actual pin (often from a debug header) which will not be honored by coreboot because CONFIG_PHYSICAL_DEV_SWITCH isn't set. Therefore, this patch removes all those non-functional instances of that function. In the future, either the board has a physical dev switch and must define it, or it doesn't and must not. In a similar sense (and since I'm touching so many board configs anyway), it's annoying that we have to keep selecting EC_SOFTWARE_SYNC. Instead, it should just be assumed by default whenever a Chrome EC is present in the system. This way, it can also still be overridden by menuconfig. CQ-DEPEND=CL:459701 Change-Id: If9cbaa7df530580a97f00ef238e3d9a8a86a4a7f Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18980 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-16mainboard/intel/galileo: Add vboot supportLee Leahy
Add the necessary files and changes to support vboot. TEST=Build and run on Galileo Gen2 with a SparkFun CryptoShield 1. Obtain and install a SparkFun CryptoShield. https://www.sparkfun.com/products/13183 2. Edit src/mainboard/intel/galileo/Kconfig to select VBOOT_WITH_CRYPTO_SHIELD 3. Use make menuconfig to update the config values and select a payload that will fit. I used SeaBIOS which does not boot. 4. Build coreboot 5. Use the command file below to generate the signed coreboot image. 6. Flash build/coreboot.rom onto the Galileo board 7. The test is successful if verstage detects that it needs recovery after Phase 1. This is expected because the image does not contain the GBB section. 8. Flash build/coreboot.signed.bin onto the Galileo board 9. The test is successful if verstage reaches Phase 4 and selects SLOT A to load the rest of the files. commands: gbb_utility -c 0x100,0x1000,0x7ce80,0x1000 gbb.blob dd conv=fdatasync ibs=4096 obs=4096 count=1553 \ if=build/coreboot.rom of=build/coreboot.signed.rom dd conv=fdatasync obs=4096 obs=4096 seek=1553 if=gbb.blob \ of=build/coreboot.signed.rom dd conv=fdatasync ibs=4096 obs=4096 skip=1680 seek=1680 \ count=368 if=build/coreboot.rom of=build/coreboot.signed.rom gbb_utility \ --set --hwid='Galileo' \ -r $PWD/keys/recovery_key.vbpubk \ -k $PWD/keys/root_key.vbpubk \ build/coreboot.signed.rom 3rdparty/vboot/scripts/image_signing/sign_firmware.sh \ build/coreboot.signed.rom \ $PWD/keys \ build/coreboot.signed.rom Change-Id: I02eb0ef647cd34c13a5fe8be0bdbe1bb38524d0c Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/18821 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-15Revert "mainboard/intel/galileo: Add vboot support"Lee Leahy
This reverts commit a50ced2eba20a007fa5b486c251c252ad09868cf. Change-Id: I4f7d3177015bfe280111843014c310e0d333cb17 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/18814 Tested-by: build bot (Jenkins)
2017-03-14mainboard/intel/galileo: Add vboot supportLee Leahy
Add the necessary files and changes to support vboot. TEST=Build and run on Galileo Gen2 with a SparkFun CryptoShield 1. Obtain and install a SparkFun CryptoShield. https://www.sparkfun.com/products/13183 2. Edit src/mainboard/intel/galileo/Kconfig to select VBOOT_WITH_CRYPTO_SHIELD 3. Use make menuconfig to update the config values and select a payload that will fit. I used SeaBIOS which does not boot. 4. Build coreboot 5. Use the command file below to generate the signed coreboot image. 6. Flash build/coreboot.rom onto the Galileo board 7. The test is successful if verstage detects that it needs recovery after Phase 1. This is expected because the image does not contain the GBB section. 8. Flash build/coreboot.signed.bin onto the Galileo board 9. The test is successful if verstage reaches Phase 4 and selects SLOT A to load the rest of the files. #!/bin/sh # # The necessary tools were built and installed using the following commands: # # pushd 3rdparty/vboot # make # sudo make install # popd # # The keys were made using the following command # # 3rdparty/vboot/scripts/keygeneration/create_new_keys.sh \ # --4k --4k-root --output $PWD/keys # # # Create the GBB area blob # gbb_utility -c 0x100,0x1000,0x7ce80,0x1000 gbb.blob # # Add the empty GBB to the coreboot.rom image # dd conv=fdatasync ibs=4096 obs=4096 count=1553 \ if=build/coreboot.rom of=build/coreboot.signed.rom dd conv=fdatasync obs=4096 obs=4096 seek=1553 if=gbb.blob \ of=build/coreboot.signed.rom dd conv=fdatasync ibs=4096 obs=4096 skip=1680 seek=1680 \ count=368 if=build/coreboot.rom of=build/coreboot.signed.rom # # Add the keys and HWID to the GBB # gbb_utility \ --set --hwid='Galileo' \ -r $PWD/keys/recovery_key.vbpubk \ -k $PWD/keys/root_key.vbpubk \ build/coreboot.signed.rom # # Sign the firmware with the keys # 3rdparty/vboot/scripts/image_signing/sign_firmware.sh \ build/coreboot.signed.rom \ $PWD/keys \ build/coreboot.signed.rom Change-Id: I96170412e7bbc2b9c747ff5e2c845f29220353ed Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/18041 Tested-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-07mainboard/intel/galileo: Remove space before opening bracketLee Leahy
Fix the error detected by checkpatch and update the copyright date. TEST=Build and run on Galileo Gen2 Change-Id: Idc55169913e7b7b0aca684c26f6ed3b349fc6c09 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/18592 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-16intel: Fix copy/paste error in license textMarshall Dawson
Change all instances of "wacbmem_entryanty" to "warranty". Change-Id: I113333a85d40a820bd8745efe917181ded2b98bf Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/18136 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-30mainboard/intel/galileo: Make FSP 2.0 the defaultLee Leahy
Switch from FSP 1.1 to FSP 2.0 as the default build. BRANCH=none BUG=None TEST=Build and run on Galileo Gen2 Change-Id: Icbb3a36cdde68baf4d68fbfc371f8847c56e1162 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/16810 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-30mainboard/intel/quark: Add FSP selection valuesLee Leahy
Add Kconfig values to select the FSP setup: * FSP version: 1.1 or 2.0 * Implementation: Subroutine or SEC/PEI core based * Build type: DEBUG or RELEASE * Enable all debugging for FSP * Remove USE_FSP1_1 and USE_FSP2_0 Look for include files in vendorcode/intel/fsp/fsp???/quark BRANCH=none BUG=None TEST=Build FSP 1.1 (subroutine) and run on Galileo Gen2 Change-Id: I3a6cb571021611820263a8cbfe83e69278f50a21 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/16806 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-05soc/intel/quark: Add FSP 2.0 romstage supportLee Leahy
Add the pieces necessary to successfully build and run romstage using the FSP 2.0 build. Because romstage is using postcar, add the postcar pieces so that romstage can attempt to load postcar. TEST=Build and run on Galileo Gen2 Change-Id: I66b3437e3c7840223535f6ab643599c9e4924968 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15866 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-05soc/intel/quark: Add FSP 2.0 boot block supportLee Leahy
Add the pieces necessary to successfully build and run bootblock using the FSP 2.0 build. TEST=Build and run bootblock on Galileo Gen2 Change-Id: I2377f0b0147196f100396b8cd7eaca8f92d6932f Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15865 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-03mainboard/intel/galileo: Add FSP 2.0 Kconfig supportLee Leahy
Add and adjust the Kconfig flags to support both FSP 1.1 and FSP 2.0 builds for Quark. TEST=Build and run on Galileo Gen2 Change-Id: I7c5b7efd2635180edcfe4e1a98bb292030117bc8 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15864 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-03mainboard/intel/galileo: Remove use of EDK-II macros & data typesLee Leahy
Add assert.h to use coreboot's ASSERT macro. Replace the use of UINT8 data type with uint8_t. TEST=Build and run on Galileo Gen2. Change-Id: I0756b0f30b3488647530e2dd1a4ab62813815f3e Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15859 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-07-08soc/intel/quark: Pass in the memory initialization parametersLee Leahy
Specify the memory initialization parameters in mainboard/intel/galileo/devicetree.cb. Pass these values into FSP to initialize memory. TEST=Build and run on Galileo Gen2 Change-Id: I83ee196f5fb825118a3a74b61f73f3728a1a1dc6 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15260 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-07-08mainboard/intel/galileo: Gen1 - Set correct I2C scriptsLee Leahy
Switch the I2C scripts to properly match the I2C address selection for the Galileo Gen1 board. TEST=Build an run on Galileo Gen1 Change-Id: I9fc8b59a3a719abb474c99a83e0d538794626da9 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15258 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-06-11mainboard/intel/galileo: Support bootblock in CLee Leahy
Initialize the GPIOs during the boot block to properly route the SOC UART pins. TEST=Build and run on Galileo Gen2 Change-Id: I22c24f8c83f04566a0bbd598a141a5209569a924 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/15133 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-03mainboard/intel/galileo: Add CREATE_BOARD_CHECKLISTLee Leahy
Select CREATE_BOARD_CHECKLIST to create the checklist for the Quark SOC and Galileo board. TEST=Build and run on Galileo Gen2. Change-Id: Ieb3e9a5a4c149cf160e11d44a515591b57fe5c83 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15004 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-06-03mainboard/intel/galileo: Set board versionLee Leahy
Return the correct board version in SMBIOS. TEST=Build and run on Galileo Gen2 Change-Id: I97ec7bcd475142eb90930152da0244a3c5d09634 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15041 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-31quark: Enable HSUART0 as consoleLee Leahy
The use of HSUART0 on galileo requires early initialization of the I2C GPIO expanders to direct the RXD and TXD signals to DIGITAL 0 and 1 on the expansion connector. TEST=None Change-Id: I11195d79e954c1f6bc91eafe257d7ddc1310b2e7 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15010 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-31mainboard/intel/quark: Enable reg_access during romstageLee Leahy
Turn on reg_access during romstage. TEST=Build and run on Galileo Gen2 Change-Id: Iff1616836d6031f43d7741693febefa0bf26b948 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15008 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-31mainboard/intel/galileo: Use HSUART1 for consoleLee Leahy
Select HSUART1 for console. TEST=Build and run on Galileo Gen2 Change-Id: I4425af4dc8b3730b3fa2108d6cc2941bc22c2cdb Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15005 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-31mainboard/intel/galileo: Split out enabling FSP1_1Lee Leahy
Split out enabling FSP 1.1 support to prepare for enabling FSP 2.0 support. TEST=Build and run on Galileo Gen2. Change-Id: Ic4e814bcf61f9480f98e2d7bc7a1648dec43a07d Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15001 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-31soc/intel/quark: Add PCIe reset supportLee Leahy
Migrate PCIe reset from PlatformPciHelperLib in QuarkFspPkg into coreboot. Change-Id: I1c33fa16b0323091e8f9bd503bbfdb8a253a76d4 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14944 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-25mainboard/intel/galileo: Enable USB device supportLee Leahy
Turn on the USB device port. TEST=Build and run on Galileo Gen2 Change-Id: Ic1fbb2cd51414ce927f2b408ccd27c7edf978744 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14943 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-18mainboard/intel/galileo: Add I2C chip initializationLee Leahy
Add I2C chip initialization for the Galileo boards. TEST=Build and run on Galileo Gen2 Change-Id: Ib5284d5cd7a67de2f3f98940837ceb2aa69af468 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14829 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-17mainboard/intel/galileo: Add GPIO initializationLee Leahy
Add Kconfig to configure coreboot for a specific Galileo board. Configure the GPIOs for the specific Galileo board. TEST=Build and run on Galileo Gen2 Change-Id: I992460d506b5543915c27f6a531da4b1a53d6505 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14826 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-03mainboard/intel/galileo: Enable I2C and GPIOLee Leahy
Enable the I2C and GPIO controllers TEST=Build and run on Galileo Gen2 Change-Id: I97bbbb7c5e72edbed14702a4129d9cfa977e1911 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14558 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-21mainboard/intel/galileo: Enable SPI controllersLee Leahy
Enable the SPI controllers on the Quark SoC. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file: * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate UEFIPAYLOAD.fd * Load the SPI driver stack * Testing is successful when the time is able to be displayed on a set of seven-segment displays controlled by a Maxim MAX6950 SPI display controller. Change-Id: Ic9c4575730c5a9a27cf9a38a41e82d8462467f3f Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14109 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-08soc/intel/quark: Set the UPD values for MemoryInitLee Leahy
Set the UPD values for MemoryInit. * Update the FspUpdVpd.h file which specifies the parameters for MemoryInit. * Add the necessary values to chip.h to enable values to come from the mainboard's devicetree.cb file * Add the parameters to the mainboard's devicetree.cb file * Locate the platform configuration database file (pdat.bin) * Copy the data values from the chip_info structure into the UPDs * Display the UPD values Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file: * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate UEFIPAYLOAD.fd * Edit .config file and add the following lines: * CONFIG_DISPLAY_UPD_DATA=y * Testing successful when the UPD data is displayed before the call to MemoryInit Change-Id: Ic64f3d97eb43ea42d9b149769fc96bf78bf804f5 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13896 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2016-03-07mainboard/intel/galileo: Enable SD flash cardsLee Leahy
Turn on the SD controller to allow it to claim resources. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file: * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate UEFIPAYLOAD.fd * Edit .config file and add the following lines: * CONFIG_PAYLOAD_ELF=y * CONFIG_PAYLOAD_FILE="path to UEFIPAYLOAD.fd" * Testing successful when at the UEFI shell prompt: * After issuing: * "connect -r" * "map -r" * The "dir" command displays the contents of the SD flash card * The "drivers" command shows an SD host and SD media connection Change-Id: I883dc87270045786ddb931bea83fc36646a128e6 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13894 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-29mainboard/intel/galileo: Enable USBLee Leahy
Enable the EHCI and OHCI controllers. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file: * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate UEFIPAYLOAD.fd * Edit .config file and add the following lines: * CONFIG_PAYLOAD_ELF=y * CONFIG_PAYLOAD_FILE="path to UEFIPAYLOAD.fd" * Testing successful when at the UEFI shell prompt: * After issuing: * "connect -r" * "map -r" * The "dir" command displays the contents of the USB flash drive * A USB keyboard can issue shell commands * The "drivers" command shows an EHCI and OHCI connection Change-Id: Iad9abced98d9b645e8b12fa0845c97260cf62a72 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13857 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-22mainboard/intel/galileo: Enable minimal ACPI tablesLee Leahy
Enable the minimal ACPI tables. Initialize the FADT header and provide an empty DSDT. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file: * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate UEFIPAYLOAD.fd * Edit .config file and add the following lines: * CONFIG_PAYLOAD_ELF=y * CONFIG_PAYLOAD_FILE="path to UEFIPAYLOAD.fd" * Testing successful if: * Outputs multiple lines of debug serial text Change-Id: I2e30c8af2994c9f56d9ba4fe6bc35e133b1d2d6b Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13759 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-18soc/intel/quark: Enable HSUART1Lee Leahy
Enable HSUART1 for debug serial output. Specify the fixed resources in the UART driver. This keeps debug serial output flowing during the rest of the device initialization. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Testing successful if: * Debug serial output stays enabled after BS_DEV_RESOURCES state Change-Id: Ica02e5fece156b21d4a3889284ca467d55c7880d Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13730 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-17mainboard/intel/galileo: Enable PCIe root port 0Lee Leahy
Enable PCIe root port 0 Testing on Galileo: * Add a 802.11 wireless card in the mini-PCIe slot * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Testing successful if: * After PCI 00:17.0, memory addresses are assigned to the 802.11 wireless card on PCI 01:00.0 during BS_DEV_RESOURCES state Change-Id: I68ea25b8e594480fe5146ffad75e293e346e9517 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13723 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-17mainboard/intel/galileo: Disable the remaining PCI devicesLee Leahy
Add additional lines to the devicetree.cb file to disable the PCI devices in the Quark SoC. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Testing is successful if: * Devices show up as disabled in BS_DEV_ENUMERATE state or ramstage Change-Id: I1edbbcb88cef29ce972ef054c82e37bf07c3761d Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13720 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-05mainboard/intel/galileo: Add board_info.txtLee Leahy
Add missing file to fix complaints by git commit script. TEST=None Change-Id: I4aac63821a7208fb86fa6c0dda16b7537e49a69a Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13610 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-04mainboard/intel/galileo: Add Intel Galileo Gen 2 SupportLee Leahy
Add the files to build soc/intel/quark and mainboard/intel/galileo for a minimal coreboot image. Please note that this configuration does not run. Include HTML documentation for the Galileo Gen 2 board. Testing is successful if build completes successfully. TEST=Build for Galileo Change-Id: Idd3fda1b8ed9460fa8c92e6dcaa601c3c9f63a36 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13507 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 08:34:25 +0000