aboutsummaryrefslogtreecommitdiff
path: root/src/mainboard/intel/galileo
AgeCommit message (Collapse)Author
2016-08-03mainboard/intel/galileo: Remove use of EDK-II macros & data typesLee Leahy
Add assert.h to use coreboot's ASSERT macro. Replace the use of UINT8 data type with uint8_t. TEST=Build and run on Galileo Gen2. Change-Id: I0756b0f30b3488647530e2dd1a4ab62813815f3e Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15859 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-07-08soc/intel/quark: Pass in the memory initialization parametersLee Leahy
Specify the memory initialization parameters in mainboard/intel/galileo/devicetree.cb. Pass these values into FSP to initialize memory. TEST=Build and run on Galileo Gen2 Change-Id: I83ee196f5fb825118a3a74b61f73f3728a1a1dc6 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15260 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-07-08mainboard/intel/galileo: Gen1 - Set correct I2C scriptsLee Leahy
Switch the I2C scripts to properly match the I2C address selection for the Galileo Gen1 board. TEST=Build an run on Galileo Gen1 Change-Id: I9fc8b59a3a719abb474c99a83e0d538794626da9 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15258 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-06-11mainboard/intel/galileo: Support bootblock in CLee Leahy
Initialize the GPIOs during the boot block to properly route the SOC UART pins. TEST=Build and run on Galileo Gen2 Change-Id: I22c24f8c83f04566a0bbd598a141a5209569a924 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/15133 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-03mainboard/intel/galileo: Add CREATE_BOARD_CHECKLISTLee Leahy
Select CREATE_BOARD_CHECKLIST to create the checklist for the Quark SOC and Galileo board. TEST=Build and run on Galileo Gen2. Change-Id: Ieb3e9a5a4c149cf160e11d44a515591b57fe5c83 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15004 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-06-03mainboard/intel/galileo: Set board versionLee Leahy
Return the correct board version in SMBIOS. TEST=Build and run on Galileo Gen2 Change-Id: I97ec7bcd475142eb90930152da0244a3c5d09634 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15041 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-31quark: Enable HSUART0 as consoleLee Leahy
The use of HSUART0 on galileo requires early initialization of the I2C GPIO expanders to direct the RXD and TXD signals to DIGITAL 0 and 1 on the expansion connector. TEST=None Change-Id: I11195d79e954c1f6bc91eafe257d7ddc1310b2e7 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15010 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-31mainboard/intel/quark: Enable reg_access during romstageLee Leahy
Turn on reg_access during romstage. TEST=Build and run on Galileo Gen2 Change-Id: Iff1616836d6031f43d7741693febefa0bf26b948 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15008 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-31mainboard/intel/galileo: Use HSUART1 for consoleLee Leahy
Select HSUART1 for console. TEST=Build and run on Galileo Gen2 Change-Id: I4425af4dc8b3730b3fa2108d6cc2941bc22c2cdb Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15005 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-31mainboard/intel/galileo: Split out enabling FSP1_1Lee Leahy
Split out enabling FSP 1.1 support to prepare for enabling FSP 2.0 support. TEST=Build and run on Galileo Gen2. Change-Id: Ic4e814bcf61f9480f98e2d7bc7a1648dec43a07d Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15001 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-31soc/intel/quark: Add PCIe reset supportLee Leahy
Migrate PCIe reset from PlatformPciHelperLib in QuarkFspPkg into coreboot. Change-Id: I1c33fa16b0323091e8f9bd503bbfdb8a253a76d4 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14944 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-25mainboard/intel/galileo: Enable USB device supportLee Leahy
Turn on the USB device port. TEST=Build and run on Galileo Gen2 Change-Id: Ic1fbb2cd51414ce927f2b408ccd27c7edf978744 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14943 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-18mainboard/intel/galileo: Add I2C chip initializationLee Leahy
Add I2C chip initialization for the Galileo boards. TEST=Build and run on Galileo Gen2 Change-Id: Ib5284d5cd7a67de2f3f98940837ceb2aa69af468 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14829 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-17mainboard/intel/galileo: Add GPIO initializationLee Leahy
Add Kconfig to configure coreboot for a specific Galileo board. Configure the GPIOs for the specific Galileo board. TEST=Build and run on Galileo Gen2 Change-Id: I992460d506b5543915c27f6a531da4b1a53d6505 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14826 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-03mainboard/intel/galileo: Enable I2C and GPIOLee Leahy
Enable the I2C and GPIO controllers TEST=Build and run on Galileo Gen2 Change-Id: I97bbbb7c5e72edbed14702a4129d9cfa977e1911 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14558 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-21mainboard/intel/galileo: Enable SPI controllersLee Leahy
Enable the SPI controllers on the Quark SoC. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file: * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate UEFIPAYLOAD.fd * Load the SPI driver stack * Testing is successful when the time is able to be displayed on a set of seven-segment displays controlled by a Maxim MAX6950 SPI display controller. Change-Id: Ic9c4575730c5a9a27cf9a38a41e82d8462467f3f Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14109 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-08soc/intel/quark: Set the UPD values for MemoryInitLee Leahy
Set the UPD values for MemoryInit. * Update the FspUpdVpd.h file which specifies the parameters for MemoryInit. * Add the necessary values to chip.h to enable values to come from the mainboard's devicetree.cb file * Add the parameters to the mainboard's devicetree.cb file * Locate the platform configuration database file (pdat.bin) * Copy the data values from the chip_info structure into the UPDs * Display the UPD values Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file: * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate UEFIPAYLOAD.fd * Edit .config file and add the following lines: * CONFIG_DISPLAY_UPD_DATA=y * Testing successful when the UPD data is displayed before the call to MemoryInit Change-Id: Ic64f3d97eb43ea42d9b149769fc96bf78bf804f5 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13896 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2016-03-07mainboard/intel/galileo: Enable SD flash cardsLee Leahy
Turn on the SD controller to allow it to claim resources. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file: * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate UEFIPAYLOAD.fd * Edit .config file and add the following lines: * CONFIG_PAYLOAD_ELF=y * CONFIG_PAYLOAD_FILE="path to UEFIPAYLOAD.fd" * Testing successful when at the UEFI shell prompt: * After issuing: * "connect -r" * "map -r" * The "dir" command displays the contents of the SD flash card * The "drivers" command shows an SD host and SD media connection Change-Id: I883dc87270045786ddb931bea83fc36646a128e6 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13894 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-29mainboard/intel/galileo: Enable USBLee Leahy
Enable the EHCI and OHCI controllers. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file: * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate UEFIPAYLOAD.fd * Edit .config file and add the following lines: * CONFIG_PAYLOAD_ELF=y * CONFIG_PAYLOAD_FILE="path to UEFIPAYLOAD.fd" * Testing successful when at the UEFI shell prompt: * After issuing: * "connect -r" * "map -r" * The "dir" command displays the contents of the USB flash drive * A USB keyboard can issue shell commands * The "drivers" command shows an EHCI and OHCI connection Change-Id: Iad9abced98d9b645e8b12fa0845c97260cf62a72 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13857 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-22mainboard/intel/galileo: Enable minimal ACPI tablesLee Leahy
Enable the minimal ACPI tables. Initialize the FADT header and provide an empty DSDT. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file: * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate UEFIPAYLOAD.fd * Edit .config file and add the following lines: * CONFIG_PAYLOAD_ELF=y * CONFIG_PAYLOAD_FILE="path to UEFIPAYLOAD.fd" * Testing successful if: * Outputs multiple lines of debug serial text Change-Id: I2e30c8af2994c9f56d9ba4fe6bc35e133b1d2d6b Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13759 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-18soc/intel/quark: Enable HSUART1Lee Leahy
Enable HSUART1 for debug serial output. Specify the fixed resources in the UART driver. This keeps debug serial output flowing during the rest of the device initialization. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Testing successful if: * Debug serial output stays enabled after BS_DEV_RESOURCES state Change-Id: Ica02e5fece156b21d4a3889284ca467d55c7880d Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13730 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-17mainboard/intel/galileo: Enable PCIe root port 0Lee Leahy
Enable PCIe root port 0 Testing on Galileo: * Add a 802.11 wireless card in the mini-PCIe slot * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Testing successful if: * After PCI 00:17.0, memory addresses are assigned to the 802.11 wireless card on PCI 01:00.0 during BS_DEV_RESOURCES state Change-Id: I68ea25b8e594480fe5146ffad75e293e346e9517 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13723 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-17mainboard/intel/galileo: Disable the remaining PCI devicesLee Leahy
Add additional lines to the devicetree.cb file to disable the PCI devices in the Quark SoC. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Testing is successful if: * Devices show up as disabled in BS_DEV_ENUMERATE state or ramstage Change-Id: I1edbbcb88cef29ce972ef054c82e37bf07c3761d Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13720 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-05mainboard/intel/galileo: Add board_info.txtLee Leahy
Add missing file to fix complaints by git commit script. TEST=None Change-Id: I4aac63821a7208fb86fa6c0dda16b7537e49a69a Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13610 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-04mainboard/intel/galileo: Add Intel Galileo Gen 2 SupportLee Leahy
Add the files to build soc/intel/quark and mainboard/intel/galileo for a minimal coreboot image. Please note that this configuration does not run. Include HTML documentation for the Galileo Gen 2 board. Testing is successful if build completes successfully. TEST=Build for Galileo Change-Id: Idd3fda1b8ed9460fa8c92e6dcaa601c3c9f63a36 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13507 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-18 09:42:16 +0000