summaryrefslogtreecommitdiff
path: root/src/mainboard/intel/dcp847ske/usb.h
AgeCommit message (Collapse)Author
2017-12-22intel/dcp847ske: Add Intel NUC DCP847SKETobias Diedrich
https://ark.intel.com/products/71620/Intel-NUC-Board-DCP847SKE Created using autoport and manual edits. mainboard_fill_pei_data copied and adjusted from samsung/lumpy. Tested: - RAM slots with 2x4GB Kingston KVR1333D3S9/4G (DDR3-1333 1.5V). - RAM slots with 2x4GB Kingston KVR16LS11/4G (DDR3L-1600 1.35V). - SeaBIOS stable payload. - Linux 4.13.14 payload. - Booting into Linux 4.13.14 with Debian/unstable installed on the internal mSATA slot. - Non-native raminit (works). - Native raminit - KVR1333D3S9 doesn't work. - KVR16LS11 only works at 1.5V. - Native VGA init, HDMI port detection with libgfxinit. - Basic ACPI functions (power button event; power-off; reboot). - Suspend to RAM and resume works. - PCIe WLAN in half-minicard slot. - USB device in half-minicard slot. - PCIe device in full-minicard slot. - mSATA device in full-minicard slot. - Fan spins up/down in response to CPU load. Known issues: - Native raminit fails timC calibration with the RAM I have. - Technical Product Specification mentions overcurrent protection for back panel and front panel USB connectors, but I haven't been able to trigger it with either native fw or coreboot (tried up to 2.5A load). Untested: - USB debug port. Change-Id: I6e210310f55c051eaf61e0698fed855eda5d7d90 Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-on: https://review.coreboot.org/22683 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>