summaryrefslogtreecommitdiff
path: root/src/mainboard/intel/bayleybay_fsp
AgeCommit message (Collapse)Author
2014-11-19fsp_baytrail: Update chip.h UPD entries to match names in fspvpd.hMartin Roth
The entries in chip.h are used to set the UPD values. These had originally been shortened and did not match the names of the structure entries in vendorcode/intel/fsp/baytrail/include/fspvpd.h This patch aligns the names. - Update names in chip.h. - Update names in devictree registers for bayley bay and minnow max. - Update names in chipset_fsp_util.c Change-Id: I8d7e34195cec2e63802d7e07e5aed71735556936 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7486 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: FEI WANG <wangfei.jimei@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-11-15fsp: Change mobo partnumbers to reflect that it's running code FSP variantVladimir Serbinenko
Change-Id: I7c823550bf77b03907fa8940a8800658d66d6786 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7183 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-10-09intel/fsp_baytrail: Fix SMM/SMIKayalvizhi Dhandapani
With SMM enabled the boot stopped while patching up global NVS in DSDT. The cause is that both CPUs are assigned the same SMBASE address. So update the "cpu_smm_do_relocation()" function so that each CPU gets a different SMBASE address Based on rmodule work that wasn't propagated to the FSP version: commit 3eb8eb7eba55cdfd64c8d50181ea066526ff6485 Change-Id: I77cd27d3a4f207411a689b5be572b4406a03f16b Signed-off-by: Kayalvizhi Dhandapani <kayalvizhid@ami.com> Reviewed-on: http://review.coreboot.org/7026 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com> Tested-by: build bot (Jenkins)
2014-08-22Remove dead video.aslVladimir Serbinenko
Change-Id: Iadaa6172347ebb7d367d1faa6ed9462fff07d7e6 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6730 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-11bayleybay_fsp: Add bakersport board variantMartin Roth
The Bakersport board is a variant of the Bayley Bay mainboard that uses one ECC DIMM instead of two non-ECC dimms. This commit uses the Bayley Bay mainboard directory and modifies the required pieces to add the Bakersport board variant. It disables the second DIMM, points to an ECC version of the FSP, and sets the board name to be Bakersport instead of Bayley Bay. All of the code is still contained in the bayleybay_fsp directory. It seems like duplicating the whole directory for the one line of code that's actually different between the two platforms. Change-Id: Ia31e9ee927a6810a01a1ae143fcb00cfb7d8a7aa Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/5983 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-08-11soc/intel/fsp_baytrail: set up for including irqroute.h twiceMartin Roth
irq_helper.h intentionally gets included into irqroute.asl twice - once for pic mode and once for apic mode. Since people are used to seeing guard statements on the .h files, add the guards to irqroute.h and add a comment to irq_helper.h explaining why they aren't there. Add a time. Change-Id: I882cbbff0f73bdb170bd0f1053767893722dc60a Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/6572 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-18mainboard: Trivial - drop trailing blank lines at EOFEdward O'Callaghan
Change-Id: If29a70be4fb56ebb0dbf6d510412cbe2f34480ef Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6291 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-07-05intel: Make monotonic timer a first class citizenEdward O'Callaghan
The monotonic time now needs to be a first class citizen in Coreboot as it is a hard dependency of the drivers/spi flash command polling function. Change-Id: I4e43d2680bf84bc525138f71c2b813b0f6be5265 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6135 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-26bayleybay_fsp: Switch from EHCI controller to XHCIMartin Roth
- Disable the EHCI controller and enable the XHCI controller. SeaBIOS has been tested on the board and boots an OS from a flashdrive at SuperSpeed. This also enables the top USB port on the 2-port stack, which goes through a High Speed Inter-Chip port. The HSIC port is only enabled through the XHCI device. Change-Id: Ic3dfc55028fa5e081a30819fe9596b1a9f57fd9c Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/6106 Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Tested-by: build bot (Jenkins)
2014-06-23bayleybay_fsp: Add comments for the MMC/SD devices in devicetreeMartin Roth
This just adds some additional comments for the EMMC / SD / SDIO PCI devices in devicetree. The documentation states that the EMMC 4.1 device shouldn't be used, but it's available to enable in the FSP. Because it can be enabled, I've included it in the devicetree even though its use is discouraged. Change-Id: I64633fe1908368f69a8d4031aa900b0bceb2189e Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/6089 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-18intel/bayleybay_fsp: Drop redundant EARLY_CBMEM_INITKyösti Mälkki
This is implied from DYNAMIC_CBMEM from soc/. Change-Id: I8cd8c2dff723950377998750377a3168f1f5fc5b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6029 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-06-18ACPI: Remove CBMEM TOC from GNVSKyösti Mälkki
This existed for ChromeOS but was no longer used with DYNAMIC_CBMEM. Change-Id: I558a7ae333e5874670206e20a147dd6598a3a5e7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6032 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-06-13fsp_baytrail: Fix CONFIG_ENABLE_FSP_FAST_BOOTMartin Roth
While pushing the fsp_baytrail code, it was requested that we change CONFIG_ENABLE_FAST_BOOT to CONFIG_ENABLE_FSP_FAST_BOOT. These were missed in the change. Change-Id: If8af3f90b0f5cc9154ff1d3a387f442430f42dee Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/5972 Tested-by: build bot (Jenkins) Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-06-12bayleybay_fsp Kconfig: Remove unnecessary overridesMartin Roth
Use the default mmconf base address and fsp locations. Change-Id: Ia9116b0f0fc799592df2a10b10e086cfc88b394c Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/5982 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-30intel/bayleybay: Add Intel's Bayley Bay mainboardMartin Roth
Bay Trail-I Platform – Bayley Bay-I Customer Reference Board The Bayley Bay CRB-I is a dual-channel DDR3L SO-DIMM non-ECC platform. It is designed to support the Bay Trail-I SoC. This implementation uses the Intel FSP (Vist the Intel FSP website for details on FSP architecture and support). This code does not currently support S3. All other features and IO ports are functional. Booted on Ubuntu 14.04, Mint 16, Fedora 20 with SeaBIOS payload. Memtest86, FWTS, and other tests pass. Notes: - Generates a 2MB binary to be flashed to the upper 2MB of the ROM, to preserve the existing Intel Flash Descriptor & TXE binary. - Tested with B0 & B3 Baytrail I parts Board support page will be updated on acceptance. Change-Id: I80c836c7590f2dc25ec854e7a0bb939024cea600 Signed-off-by: Martin Roth <gaumless@gmail.com> Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/5792 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>