summaryrefslogtreecommitdiff
path: root/src/mainboard/intel/adlrvp
AgeCommit message (Collapse)Author
2020-10-16mb/intel/adlrvp: Enable Hybrid storage modeSubrata Banik
TEST=Build and test booting ADL RVP form NVMe and Optane localhost ~ # lspci -d :f1a6 Show all the NVMe devices and be really verbose localhost ~ # lspci -vvvd :f1a6 Print PCIe lane capabilities and configurations for all the NVMe devices. Change-Id: I0a04b23b17df574d4fa3bae233ca40cd3b104201 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46420 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-16mb/intel/adlrvp: Enable PCIE RP11 for optaneSubrata Banik
A regular M.2 NVMe SSD shows up on RP9 and runs at x4 width. Optane memory module shows up as 2 NVMe devices in x2 config: - NVMe storage device uses RP9 - NVMe Optane memory uses RP11 Note: These two devices are sharing CLK PINs because of same M.2 slot. TEST=Build and boot ADL RVP board using Intel Optane card. Change-Id: Ia21d7d2fd07c4fb32291af7bb5a2e41e40316278 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46419 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-16mb/intel/adlrvp: Fix SSD detection issue on ADL RVPSubrata Banik
Make PCI ClkReq-to-ClkSrc mapping correct to fix SSD detection issue on ADL RVP. TEST=Able to detect WD SSD card over PCH SSD RP9. Change-Id: I7e26429281f8d3b9edae0f266a5868118369be3f Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46418 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-16mb/intel/adlrvp: Program GPIO for M.2 PCH SSDSubrata Banik
This patch programs GPIO for PCH SSD Power Enable (GPP_D16) and Port Detect (GPP_A12) as per schematics. TEST=Able to build and boot ADL RVP. Change-Id: I015e46bdf25437c6b196deb3e610bc1b58726070 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46417 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-10-14mb/intel/adlrvp: Add ADL-P mainboard ASL codeSubrata Banik
Add required ASL files into dsdt.asl TEST=Dump and disassemble DSDT and verify all ACPI devices are present. Change-Id: I70829e2bdb12fad20627d9aea47e745d9095f07a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46267 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-10-14mb/intel/adlrvp: Add ADL-P ramstage mainboard codeSubrata Banik
List of changes: 1. Add devicetree.cb config parameters related to FSP-S UPD 2. Configure GPIO as per ADL-P RVP 3. Add files required for ramstage(ec.c, mainboard.c) 4. Add smihandler.c for SMM 5. Add devicetree changes as below - USB OC PIN programing - GPE configuration - SATA port mapping - LPSS configuration - Audio configuration - IA common SoC configuration - EDP configuration - TCSS USB configuration - Enable S0ix TEST=Able to boot ADL-P RVP without Chrome EC (using on-board EC) with UART log over legacy UART0 port as 0x3f8 with NVME at RP9 reach till depthcharge payload. Change-Id: I120885956c88babfa09d24ce1079d49306919b8a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46265 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-10-13mb, soc/intel: Switch to using drivers/wifi/generic for Intel WiFi devicesFurquan Shaikh
This change switches all mainboard devices to use drivers/wifi/generic instead of drivers/intel/wifi chip driver for Intel WiFi devices. There is no need for two separate chip drivers in coreboot to handle Intel and non-Intel WiFi devices since the differences can be handled at runtime using the PCI vendor ID. This also allows mainboard to easily multi-source WiFi chips and still use the same firmware image without having to distinguish between the chip drivers. BUG=b:169802515 BRANCH=zork Change-Id: Ieac603a970cb2c9bf835021d1fb0fd07fd535280 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46035 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-10-13mb/intel/adlrvp/dsdt.asl: Use macro for DSDT revisionElyes HAOUAS
Change-Id: I6f4d0bf9adc1cce4942a16675a072ffea00bd2e0 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46244 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-10-11mb/intel/adlrvp: Add ADL-P romstage mainboard codeSubrata Banik
List of changes: 1. Add DDR4 and LPDDR4 memory related code - SPD for LPDDR4 - DQ byte map - DQS CPU-DRAM map - Rcomp resistor - Rcomp target 2. Fill FSP-M related UPD parameters 3. Add devicetree.cb config parameters related to FSP-M UPD TEST=Able to build and boot ADL-P RVP till ramstage early Change-Id: Iffc5c17ed0725f61c8c274a80a1d27161ca6cebf Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46091 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-08mb/intel/adlrvp: Add initial ADL-P mainboard codeSubrata Banik
List of changes: 1. Initial code block to select SOC_INTEL_ALDERLAKE Kconfig 2. Add minimum code to make ADL-P RVP build successfully 3. Mainly bootblock and verstage code added to reach till verstage 4. Add support for 2 mainboards as ADL-P board with default EC (Windows SKU) and Chrome EC (Chrome SKU) 5. Add empty dsdt.asl to avoid compilation error TEST=Able to build and boot ADL-P RVP till romstage early. Change-Id: I2b551f48a4eb4d621d9a86c5d189c517d5610069 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46054 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>