summaryrefslogtreecommitdiff
path: root/src/mainboard/intel/adlrvp/gpio.c
AgeCommit message (Collapse)Author
2022-09-09mb/intel/adlrvp: Enable Cr50 TPM over SPI for adlrvp_rplBora Guvendik
Configure GPIO pins, add Kconfig options and enable TPM device in devicetree. Add H1 TPM IRQ GPIO pin in gpio.c BUG=none BRANCH=firmware-brya-14505.B Cq-Depend: chromium:3774914 TEST=Boot the image and check the successful TPM communication in verstage,romstage & ramstage from coreboot logs. Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: I1b4119373f69954d620dc09e637a7571312a5fc1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65987 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Selma Bensaid <selma.bensaid@intel.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
2022-07-14mb/intel/adlrvp: remove I2S2 GPIO settingsCliff Huang
It turns out that there is no device connected to I2S2. This patch clarifies the GPIO settings device association and remove unnecessary configuration. GPP_A8 -> default: GP-in ; set to NF1: SRCCLKREQ7# GPP_A9 -> default: NF1: ESPI_CLK GPP_A10 -> default: NF1: ESPI_RESET# BRANCH=firmware-brya-14505.B Signed-off-by: Cliff Huang <cliff.huang@intel.com> Change-Id: I7a575f495d841fe0bf6fd86a84caeee064f6904b Reviewed-on: https://review.coreboot.org/c/coreboot/+/65494 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
2022-06-16mb/intel/adlrvp: Add 5G WWAN ACPI support for ADL-P RVPCliff Huang
Add FM350GL 5G WWAN support using drivers/wwan/fm and additional PM features from RTD3. PCIe root port: 6 (1 based) clock source & request: 5 (0 based) GPIOs: WWAN_PERST_N: GPPC_C5 WWAN_RST_N: GPPC_F14 WWAN_FCP_OFF_N: GPPC_F15 WWAN_WAKE_N: GPPC_D18 WWAN_PWREN: GPPC_F21 WWAN_DISABLE_N: GPPC_D15 CLKREQ5_WWAN_N: GPPC_H23 TEST=Check SSDT table to see if the PXSX device and PowerResource RTD3 are generated under the root port. BRANCH=firmware-brya-14505.B Signed-off-by: Cliff Huang <cliff.huang@intel.com> Change-Id: I10902245e3a5e05cd2af9030394933e936c25396 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63941 Reviewed-by: Jeremy Compostella <jeremy.compostella@intel.corp-partner.google.com> Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
2022-06-10mb/intel/adlrvp: x4 slot support (SD card support) for Adl-P RVPCliff Huang
Use clock src and clock req to 7 for x4 slot. Remove free running clock setting for clock 6. Configure gpio for source clock OEB native function going to x4 slot. BUG=b:233252409 BRANCH=firmware-brya-14505.B TEST=insert SD AIC to x4 slot. boot to OS and use 'lspci' to check the device. ex: 58:00.0 SD Host controller: O2 Micro, Inc. Device 8621 (rev 01) NOTE: The bus number varies. Signed-off-by: Cliff Huang <cliff.huang@intel.corp-partner.google.com> Change-Id: Iba5d83d133b6ae8cd389ddd971db308170094300 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63945 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
2022-04-07ChromeOS: Add DECLARE_x_CROS_GPIOS()Kyösti Mälkki
Change-Id: I88406fa1b54312616e6717af3d924436dc4ff1a6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58899 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-23mb: Add space before closing comment block keywordPaul Menzel
Run the command below to fix all occurrences. $ git grep -l 'ramstage\*/' | xargs sed -i 's,ramstage\*/,ramstage */,' Change-Id: Ied155d325846fc0ef3e823e5708c6f74e3d7998f Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60247 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-11-11ChromeOS: Replace with or add <types.h>Kyösti Mälkki
It's commented in <types.h> that it shall provide <commonlib/helpers.h>. Fix for ARRAY_SIZE() in bulk, followup works will reduce the number of other includes these files have. Change-Id: I2572aaa2cf4254f0dea6698cba627de12725200f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58996 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-09ChromeOS: Fix <vc/google/chromeos/chromeos.h>Kyösti Mälkki
Change-Id: Ibbdd589119bbccd3516737c8ee9f90c4bef17c1e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58923 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-11-02mb/intel/adlrvp: Configure EC in RW GPIOAnil Kumar
EC_IN_RW signal from EC GPIO is connected to GPIO E7 of SOC. This GPIO can be used to check EC status trusted (LOW: in RO) or untrusted (HIGH: in RW). Branch=none Bug=none Test=Issue manual recovery and confirm DUT is entering recovery mode on ADL-M RVP. Signed-off-by: Anil Kumar <anil.kumar.k@intel.com> Change-Id: I20804db450ab0b3ebe19c51ba2b294a0137d81a7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58099 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-28mb/intel/adlrvp: Configure SATA DEVSLP as per latest schematicsSubrata Banik
1. GPP_E5 => Remove unused GPIOs 2. GPP_H12, GPP_H13 => Program the correct Native Functions for GPIO Change-Id: I588a8c1153eaa1bf818a081c6c5d18a669017d95 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49964 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-01-10mb/intel/adlrvp: Update GPIOs as per latest schematicsSubrata Banik
1. GPP_D8, GPP_H23 => Remove unused GPIOs 2. GPP_E18 .. GPP_E22 => Program the correct Native Functions for GPIO Change-Id: Iedb1f8fbf5f96a9617b72ba1a6419e3fd4e331b4 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49260 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-07mb/intel/adlrvp: Remove GPP_E0Meera Ravindranath
Remove the unused UART_BT_WAKE GPIO as BT is over USB. Change-Id: I638b4528fa5c4c378a1e8ff7bb88546da1513df2 Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48240 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-12-01mb/intel/adlrvp: Configure Camera related GPIO as per schematicsVarshit Pandya
Configure RST and PWR_EN signals for both WFC and UFC Signed-off-by: Varshit Pandya <varshit.b.pandya@intel.com> Change-Id: Ie416da373756b1c73472b8572f87930965a3d6ec Reviewed-on: https://review.coreboot.org/c/coreboot/+/47496 Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-01mb/intel/adlrvp: Update GPIO configuration as per schematicsVarshit Pandya
Configure I2C related GPIO as per ADL-P schematics. This is based on Revision 0.974 of schematics. Signed-off-by: Varshit Pandya <varshit.b.pandya@intel.com> Change-Id: I76e1207cb31bed10b6e9fbeb2456b6feec42f97e Reviewed-on: https://review.coreboot.org/c/coreboot/+/47495 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2020-12-01mainboard/intel/adlrvp: Enable PCH PCIe device over x1 slotSubrata Banik
List of changes: 1. Enable Root Port 8 aka 0:0x1c:7 2. Assign free running clock for RP8 3. Apply W/A to get card detected on x1 slot - Drive OEB 7:GPP_A7 and OEB 6:GPP_E5 low TEST=Able to detect PCIe SD card over x1 slot localhost ~ # dmesg | grep mmc [ 3.643755] mmc0: SDHCI controller on PCI [0000:02:00.0] using ADMA [ 3.825201] mmc0: new ultra high speed DDR50 SDHC card at address 17f8 [ 3.835452] mmcblk0: mmc0:17f8 SE16G 14.4 GiB [ 3.849158] mmcblk0: p1 Change-Id: Ibea37b8de4dd020ff0108ec90ea6f8bcfaa4fb17 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48080 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-23mb/intel/adlrvp: Enable pre-boot display over HDMI-B portSubrata Banik
List of changes: 1. Configure CTRLCLK and CTRLDATA for HDMI 2. Enable Ddc and HPD for Port-B 3. Disable dual eDP configuration for Port-A and B TEST=Able to see depthcharge pre-boot screens over HDMI-B port. Change-Id: I7509b981f35fc60a7885b2b07067cb0d35ec625f Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47838 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-18mb/intel/adlrvp: Update HPD1/2 GPIO as per latest schematicsSubrata Banik
HPD_1: A19 -> E14 HPD_2: A20 -> A18 Change-Id: Idf3c8f4931bf8364bb9216a9369df7e05dcde047 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47683 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-13mb/intel/adlrvp: Update WWAN GPIO as per latest schematicsSubrata Banik
WWAN_RST#: E10 -> F14 WWAN_PWR_EN: E13-> F21 Change-Id: I7182f384eb7a404dfe623c64e29467b41c6b0bdd Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47519 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-08mb/intel/adlrvp: Refactor ADLRVP code to get rid of 'variants/baseboard'Subrata Banik
List of changes: 1. Use devicetree.cb from default location 2. Create variant directory for ADL RVP with external EC as 'adlrvp_p_ext_ec' 3. Add initial overridetree.cb for 'adlrvp_p' and 'adlrvp_p_ext_ec' to override 'devicetree.cb' as applicable. 4. Move all common files between 'adlrvp_p' and 'adlrvp_p_ext_ec' to mainboard directory TEST=Build and boot both ADLRVP with onboard and external EC. Change-Id: I3591e214ed32dc9baaa49b92dff59579f29c7bd6 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47335 Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 16:08:09 +0000