summaryrefslogtreecommitdiff
path: root/src/mainboard/iei
AgeCommit message (Collapse)Author
2012-02-17amd/sb700: Move HAVE_HARD_RESET to southbridgePatrick Georgi
No in-tree board using that chipset has it not selected, so move selection from boards to southbridge. Change-Id: I7a7a1919b7a555156b8da21e8db7dd8f682d68e1 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/661 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2012-02-13AMD Geode cpus: apply un-written naming rulesKyösti Mälkki
Kconfig directives to select chip drivers for compile literally match the chip directory names capitalized and underscored. Rename directories and Kconfig as follows: model_lx -> geode_lx model_gx1 -> geode_gx1 model_gx2 -> geode_gx2 Change-Id: Ib8bf1e758b88f9efed1cf8b11c76b796388e7147 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/613 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-30remove usbdebug.h include from mainboard/romstage codeSven Schnelle
No romstage is supposed to use usbdebug functions/defines directly, so remove all those includes. The usb code is now called and setup from console code. Change-Id: I9b1120d96f5993303d6b302accc86e14a91f7a9f Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/354 Tested-by: build bot (Jenkins)
2011-10-13mptable: Refactor mptable generation some morePatrick Georgi
The last couple of lines of every mptable function were mostly identical. Refactor into common code, a new function mptable_finalize. Coccinelle script: @@ identifier mc; @@ ( -mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); -mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); -printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); -return smp_next_mpe_entry(mc); +return mptable_finalize(mc); | -mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); -mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); -return smp_next_mpe_entry(mc); +return mptable_finalize(mc); ) Change-Id: Ib2270d800bdd486c5eb49b328544d36bd2298c9e Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/246 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-13mptable: Get rid of fixup_virtual_wirePatrick Georgi
As stated in some code files, fixup_virtual_wire was established to avoid touching 200 invocations of the mptable code. Let Coccinelle do it: @@ type T; identifier v; @@ -void fixup_virtual_wire(T v) -{ ... } @@ expression A; identifier v; @@ -v = smp_write_floating_table(A); +v = smp_write_floating_table(A, 0); @@ expression A; identifier v; @@ -v = smp_write_floating_table(A, 0); -fixup_virtual_wire(v); +v = smp_write_floating_table(A, 1); Change-Id: Icad8a063380bf4726be7cebb414d13b574112b14 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/245 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-07-22Update AMD SR5650 and SB700efdesign98
This updates the code for the AMD SR5650 and SB700 southbridges. Among other things, it changes the romstage.c files by replacing a .C file include with a pair of .H file includes. The .C file is now added to the romstage in the SB700 or SR5650 Makefile.inc. file to the romstage and ramstage elements. This particular change affects all mainboards that use the SB700, and their changes are include herein. These mainboards are: Advansus a785e, AMD Mahogany, Mahogany-fam10, Tilapia-fam10, Asrock 939a785gmh, Asus m4a78-em, m4a785-m, Gigabyte ma785gm, Iei Kino-780am2-fam10 Jetway pa78vm5 Supermicro h8scm_fam10 The nuvoton/wpcm450 earlysetup interface is changed because the file is no longer included in the mainboard romstage.c files. Change-Id: I502c0b95a7b9e7bb5dd81d03902bbc2143257e33 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/107 Tested-by: build bot (Jenkins) Reviewed-by: Kerry She <shekairui@gmail.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-04-20run uart_init() from console_init, just like the other console ↵Stefan Reinauer
initialization functions. Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6531 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-19Drop baud rate init to an arbitrary baud rate from Super I/O code. ↵Stefan Reinauer
See discussion at http://www.mail-archive.com/coreboot@coreboot.org/msg29394.html config->com1, devicetree.cb cleanup and init_uart8250() removal will follow once this patch is comitted Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Patrick Georgi <patrick@georgi-clan.de> Updated to drop com1, com2.... from config structure and devicetree.cb git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6521 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-18* Set USBDEBUG_DEFAULT_PORT in all southbridges and use that valueStefan Reinauer
to unify calls to *_enable_usbdebug() * rename *_enable_usbdebug() to enable_usbdebug() * move enable_usbdebug() to generic romstage console init code and drop it from the individual romstage.c files. Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6513 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-11Unify use of post_codeAlexandru Gagniuc
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6487 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-28SP5100's code is based on SB700. Change the legacy sb700 of sb7xx_51xx.Zheng Bao
Since the SB700 has changed to sb7xx_51xx, change legacy name in other mainboard. Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6463 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-08Enable mahogany_fam10 and Kino family 10h to run the SB HT link at the ↵Scott Duplichan
expected HT3 frequency and width by matching the BUID swap list to the production BIOS. In addition, the BUID swap list has been moved into the project-specific file romstage.c for the other 13 AMD family 10h projects as well. For projects using a desktop AMD family 10h processor, pasting in the mahogany_fam10 swap list will likely allow HT3 operation. This should be confirmed on real hardware before commiting any swap list change. A different swap list will be needed for server projects. For serengeti_cheetah_fam10, a reference BIOS swap list to try is: 0x00, 0x0A, 0x00, 0x06, 0xFF, 0x0A, 0x06, 0xFF. The patch makes these changes: 1) Remove the BUID swap list from ht_wrapper.c and put it in each of 15 romstage.c files where it is used (AMD family 10h projects). 2) Add a prototype to amdfam10.h. 3) Modify the swap list and test in real hardware for mahogany_fam10 and kino family 10h and confirm HT3 operation for the SB link. Abuild tested. Signed-off-by: Scott Duplichan <sc...@notabs.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6439 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-01Use subsystem id from devicetree.cb instead of Kconfig and moveSven Schnelle
all boards to the new config scheme. Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6421 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Kino devicetree.cb SIO PNP devices were not matched up with theMarc Jones
actual SIO. This fixes the serial device being disabled during PNP init. Signed-off-by: Marc Jones <marcj303@gmail.com> Acked-by: Scott Duplichan <scott@notabs.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6400 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-26Make AMD Fam10h CPU microcode updates optional in Expert modeXavi Drudis Ferran
Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6385 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-19The same mechanisms are used for normal and fallback images. Stefan Reinauer
Hence drop the FALLBACK_ prefix Signed-off-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6204 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-16Get mptable OEM/product ID from kconfig variables.Uwe Hermann
We currently use "COREBOOT" unconditionally as the "OEM ID" in our mptable.c files, and hardcode the mainboard name in mptable.c like this: mptable_init(mc, "DK8-HTX ", LAPIC_ADDR); However, the spec says "OEM ID: A string that identifies the manufacturer of the system hardware." (Table 4-2, page 42) so "COREBOOT" doesn't match the spec, we should use the hardware vendor name. Thus, use CONFIG_MAINBOARD_VENDOR which we have already as the "OEM ID" (truncate/fill it to 8 characters as per spec). Also, use CONFIG_MAINBOARD_PART_NUMBER (the board name) as "product ID", and truncate/fill it to 12 characters as per spec, if needed. Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6183 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-11Following patch makes just one fadt.c file. For SB700.Rudolf Marek
Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6165 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-11After this has been brought up many times before, rename src/arch/i386 toStefan Reinauer
src/arch/x86. Signed-off-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6161 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-10Add TINY_BOOTBLOCK support for AMD SB700.Uwe Hermann
Factor out the ROM decode enable functionality into bootblock.c and handle it via the usual TINY_BOOTBLOCK mechanism. Use "select TINY_BOOTBLOCK" in the southbridge, not individual boards. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6159 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-09Deduplicate various ACPI .asl files.Uwe Hermann
The files debug.asl, globutil.asl, and statdef.asl are duplicated in many K8/Fam10h boards. However, they're neither board-specific nor K8/Fam10h-specific nor AMD-specific, so move them to src/arch/i386/acpi. debug.asl contains generic chunks for I/O port 0x80 handling, and debug output over serial port (init COM port, send byte, send string, etc). globutil.asl contains utility methods for string comparison, string length and similar stuff. statdef.asl contains generic ACPI bit definitions / status codes from the ACPI spec (not board- or chipset-specific). This patch was mostly generated by: mkdir src/arch/i386/acpi svn add src/arch/i386/acpi svn cp src/mainboard/amd/dbm690t/acpi/debug.asl src/arch/i386/acpi/ svn cp src/mainboard/amd/dbm690t/acpi/globutil.asl src/arch/i386/acpi/ svn cp src/mainboard/amd/dbm690t/acpi/statdef.asl src/arch/i386/acpi/ cd src/mainboard find . -name debug.asl -exec svn rm {} \; find . -name globutil.asl -exec svn rm {} \; find . -name statdef.asl -exec svn rm {} \; Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6156 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-08Move "select CACHE_AS_RAM" lines from boards into CPU socket.Uwe Hermann
All K8/Fam10h boards use CAR, so move the "select CACHE_AS_RAM" into the socket directories, and remove it from the individual boards. Do the same for Intel CPUs/sockets where all boards use CAR. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6151 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-08second round name simplification. drop the <component>_ prefix.stepan
the prefix was introduced in the early v2 tree many years ago because our old build system "newconfig" could not handle two files with the same name in different paths like /path/to/usb.c and /another/path/to/usb.c correctly. Only one of the files would end up being compiled into the final image. Since Kconfig (actually since shortly before we switched to Kconfig) we don't suffer from that problem anymore. So we could drop the sb700_ prefix from all those filenames (or, the <componentname>_ prefix in general) - makes it easier to fork off a new chipset - makes it easier to diff against other chipsets - storing redundant information in filenames seems wrong Signed-off-by: <stepan@coresystems.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6150 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-08first round name simplification. drop the <component>_ prefix.stepan
the prefix was introduced in the early v2 tree many years ago because our old build system "newconfig" could not handle two files with the same name in different paths like /path/to/usb.c and /another/path/to/usb.c correctly. Only one of the files would end up being compiled into the final image. Since Kconfig (actually since shortly before we switched to Kconfig) we don't suffer from that problem anymore. So we could drop the sb700_ prefix from all those filenames (or, the <componentname>_ prefix in general) - makes it easier to fork off a new chipset - makes it easier to diff against other chipsets - storing redundant information in filenames seems wrong Signed-off-by: <stepan@coresystems.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6149 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-07Get rid of some unneeded function prototypes in romstage.c files.Uwe Hermann
Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6147 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-07Trivial. Fix typo.Zheng Bao
sh> find -name "acpi_tables.c" | xargs sed -i "s/FDAT/FADT/g" Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Zheng Bao <zheng.bao@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6146 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-06Drop unused/obsolete CONFIG_COMPRESS from a few board Kconfigs.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6145 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-22Drop per-board ram_check() calls for now.Uwe Hermann
Every board had a slightly different invokation, very often commented out anyway. We could either decide that this is only to be used by developers during bringup (and thus added manually to romstage.c and removed before the board gets committed). This method seems to be preferred from what I have heard on IRC / mailing list in the past. Or, we add the ram_check() somewhere globally and allow the user to enable it via menuconfig (possibly only if EXPERT is selected). Either way, the current method of spreading the calls all over the place is not really the way to go. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6115 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-21Simplify a few code chunks, fix whitespace and indentation.Uwe Hermann
Also, remove some less useful comments, some dead code / unused functions. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6108 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-21Drop excessive whitespace randomly sprinkled in romstage.c files.Uwe Hermann
Also drop some dead or useless code snippets. Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6107 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-21Convert boards to use mptable_write_buses.Patrick Georgi
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6105 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-21Use DIMM0 et al in lots more places instead of hardocding values.Uwe Hermann
The (0xa << 3) expression equals 0x50, i.e. DIMM0. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6103 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-20Some more DIMM0 related cleanups and deduplication.Uwe Hermann
- VIA VT8235: Do the shift in smbus_read_byte() as all other chipsets do. - spd.h: Move RC00-RC63 #defines here, they were duplicated in lots of romstage.c files and lots of spd_addr.h files. Don't even bother for those spd_addr.h which aren't even actually used, drop them right away. - Replace various 0x50 hardcoded numbers with DIMM0, 0x51 with DIMM1, and 0xa0 with (DIMM0 << 1) where appropriate. - Various debug.c files: Replace SMBUS_MEM_DEVICE_START with DIMM0, SMBUS_MEM_DEVICE_END with DIMM7, and drop useless SMBUS_MEM_DEVICE_INC. - VIA VX800: Drop unused SMBUS_ADDR_CH* #defines. - VIA VT8623: Do the shift in smbus_read_byte() as all other chipsets do. Then, replace 0xa0 (which now becomes 0x50) with DIMM0. - alix1c/romstage.c, alix2d/romstage.c: Adapt to recent bit shift changes. - Various files: Drop DIMM_SPD_BASE and/or replace it with DIMM0. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6100 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-20Unify DIMM SPD addressing. For Geode, change thePatrick Georgi
addressing scheme to match the rest of the tree (0x50 instead of 0xa0). abuild tested. Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6099 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-18Fix/drop some obsolete comments,Uwe Hermann
- s/Options.lb/devicetree.cb/ - s/Config.lb/devicetree.cb/ - s/cache_as_ram_auto.c/romstage.c/ - h8dmr_fam10/README: Drop obsolete comment, we have mc_patch_01000086.h in the tree now. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6095 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-18Eliminate SET_NB_CFG_54 option. There was no board thatPatrick Georgi
deselected it, and very likely there won't ever be any hardware that requires it deselected. Keep the "selected" code path around, leading to no functional change. Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Scott Duplichan <scott@notabs.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6086 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-17This problem was introduced withTobias Diedrich
http://tracker.coreboot.org/trac/coreboot/changeset/3953 Note that all corresponding DSDTs only ever check TOM2 against 0. Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Acked-by: Rudolf Marek <r.marek@assembler.cz> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6082 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-16Move the SET_FIDVID* family of configuration options to Kconfig andPatrick Georgi
make their defaults more obvious. Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6077 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-07DSDT.asl should not report the AMD SB600/SB700 RTC as Intel PIIX4Scott Duplichan
compatible. The extended cmos is accessed differently for AMD and Intel RTCs. Not sure what if any OS cares about this distinction, but non-Intel compatible seems like a safer way to report the AMD RTC. Tested with Win7 on Mahogany_fam10 and kino-780am2-fam10. Signed-off-by: Scott Duplichan <scott@notabs.org> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6046 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-05Move QRANK_DIMM_SUPPORT to Kconfig, removing it from romstage.cPatrick Georgi
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6028 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-05Various PIRQ/MPTABLE/ACPI Kconfig fixes.Uwe Hermann
- Use HAVE_ACPI_TABLES, HAVE_MP_TABLE, and HAVE_PIRQ_TABLE (instead of GENERATE_*) in the board's Kconfig file, as all other boards do. - Add missing HAVE_ACPI_TABLES/HAVE_MP_TABLE/HAVE_PIRQ_TABLE to boards which have the respective files. The only exception: EPIA-M700 doesn't select ACPI, as it doesn't have dsdt.asl. Added a comment that the user is supposed to run the 'get_dsdt' script and edit Kconfig afterwards. - Fix minor warning/error in src/mainboard/msi/ms9652_fam10/acpi_tables.c, now that the file is actually used. - msi/ms9652_fam10: use #include instead of Include() as we usually do now. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6027 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-31Remove definitions of ACPI_SSDTX_NUM to 0, that's the default anyway.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6007 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-26We need to call smp_write_lintsrc() instead of smp_write_intsrc() forTobias Diedrich
local ints. This is wrong in most coreboot mptables, probably all generated by util/mptable/mptable.c. After fixing this now XP can boot in MPS mode on my M2V. Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5992 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-25Factor out common mptable code to mptable_init().Uwe Hermann
- Drop sig[], oem[], and productid[] fields in all mptable.c files, no longer needed. The sig[] is always the same ("PCMP"), the oem[] is currently also always the same ("COREBOOT"), and productid is being passed into mptable_init() directly as string now. - LAPIC_ADDR is passed in as parameter, too. While at the moment it's always the same value that is passed in, the LAPIC base address could also be relocated theoretically, so keep it as parameter for now. - Fix a few productid entries, they were (partially) incorrect: - DK8S2 (was "DK8X", copypaste) - 939A785GMH (was "MAHOGANY", copypaste) - X6DHE-G (was "X6DHE", incomplete board name) - H8DME-2 (was "H8DMR", copypaste) - H8QME-2+ (was "H8QME", incomplete board name) - X6DHE-G2 (was "X6DHE", incomplete board name) - X6DHR-iG2 (was "X6DHR-iG", incomplete board name) - GA-M57SLI-S4 (was "M57SLI", incomplete board name) - KINO-780AM2 (was "KINO", incomplete board name) - DL145 G1 (was "DL145G1", small fix as per vendor website) - DL145 G3 (was "TREX", wrong board name) - DL165 G6 (was "HP DL165 G6", drop vendor) - S2912 (was "S2895", copypaste) - VT8454c (was "VIA VT8454C", drop vendor, lower-case "c") - EPIA-N (was "P4DPE", copypaste) - pc2500e (was "PC2500", incorrect name) - S1850 (was "S2850", copy-paste) - MS-7135 (was "MS7135") - MS-9282 (was "MS9282") - MS-9185 (was "MS9185") - MS-9652 (was "K9ND MS-9652") - Ultra 40 (was "ultra40") - E326 (was "E325", copypaste) - M4A785-M (was "TILAPIA", copypaste) - P2B-D (was "ASUS P2B-D", drop vendor) - P2B-DS (was "ASUS P2B-DS", drop vendor) - Adapt the mptable utility to use mptable_init() too. Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5987 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-24Running a checked build of Windows is needed for understanding its various ↵Scott Duplichan
BIOS related BSODs. Win7 checked build complains when running coreboot+seabios: FADT revision inconsistent with length. Revision: 0x1 Length: 0xf4 Expected Length: 0x74 Change the FADT revision from 1 to 3 to match its length and prevent the Windows checked build assert. Signed-off-by: Scott Duplichan <scott@notabs.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5985 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-13Enable or disable the power button in KconfigPeter Stuge
Some mainboards need to disable the power button to avoid turning off right after being turned on, while other boards ship with a jumper over the power button and should allow the user to configure the behavior. This adds infrastructure in the form of four mutually exclusive options which can be selected in a mainboard Kconfig (power button forced on/off, and user-controllable with default on/off) and one result bool which source code can test. (Enable the button or not.) The options have been implemented in CS5536 code and for all mainboards which select SOUTHBRIDGE_AMD_CS5536, but should be used also by other chipsets where applicable. Note that if chipset code uses the result bool ENABLE_POWER_BUTTON, then every board using that chipset must select one out of the four control options in order to build. All touched boards should have unchanged behavior, except pcengines/alix1c, traverse/geos and lippert/hurricane-lx where the power button can now be configured by the user. Build tested for alix1c, alix2d, hurricane-lx and wyse-s50. Confirmed to work as advertised on alix1c both with button enabled and disabled. Includes additional traverse/geos changes from Nathan and lippert/hurricane-lx changes from Jens to correctly use the new feature on those boards. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Aurelien Guillaume <aurelien@iwi.me> Acked-by: Nils Jacobs <njacobs8@hetnet.nl> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5948 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-12We define IO_APIC_ADDR in <arch/ioapic.h>, let's use it.Uwe Hermann
As both ioapic.h and acpi.h define a macro named "NMI", rename one of them (NMI -> NMIType in acpi.h). Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5943 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-07Remove duplicate line from pci_ids.h.Jonathan Kollasch
Signed-off-by: Jonathan Kollasch <jakllsch@kollasch.net> Acked-by: Jonathan Kollasch <jakllsch@kollasch.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5920 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-05- move EHCI_BAR_INDEX to ehci.h - it's constant as per EHCI spec 2.3.1Patrick Georgi
- move EHCI_BAR and EHCI_DEBUG_OFFSET to Kconfig to be set by USB debug port enabled southbridges - drop USB debug code includes from romstage.cs and use romstage-srcs in the build system instead Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5911 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-05Remove lib/ramtest.c-include from all CAR boards.Patrick Georgi
Remove many more .c-includes from i945 based boards. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5910 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-02Allow selecting the physical USB Debug Port on AMD SB700.Uwe Hermann
The AMD SB700 allows changing the physical USB port to be used as USB Debug Port, implement support for this. Also, fix incorrect PCI device of the SB700 EHCI device. Actually, the SB700 has _two_ EHCI devices (D18:F2 and D19:F2), but for now we only use D18:F2. Our generic USBDEBUG code cannot handle multiple EHCI PCI devices currently, AFAICS. Hook up all SB700 boards to the CONFIG_USBDEBUG_DEFAULT_PORT facility. Untested, but should work. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5907 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-01Move CACHE_AS_RAM_ADDRESS_DEBUG out of romstage.c into Kconfig,Patrick Georgi
rename it slightly, make it visible only on relevant northbridges, drop it entirely from via boards (as they seem to have picked it up from AMD code without using it themselves), and make it default to false for all boards. Some romstages used to set this to "true" (ie. "print debug output"), but I didn't follow up on it in Kconfig - if you need it to debug CAR, enable it yourself. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5898 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-28Remove redundant HW_MEM_HOLE_SIZEK and HW_MEM_HOLE_SIZE_AUTO_INC settings.Myles Watson
Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5875 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-27All these boards already had the CACHE_AS_RAM option in their individualWarren Turkal
configs. I just moved it the the CPU that they all use. Signed-off-by: Warren Turkal <wt@penguintechs.org> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5871 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-25Drop some useless "../../../" in #includes (trivial).Uwe Hermann
Build-tested using abuild. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5844 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-24Hook up all AMD SB600/SB700 boards to the EHCI Debug Port infrastructure.Uwe Hermann
Without a (currently) dummy set_debug_port() function the build fails, this may or may not be fixed differently in the future. Manually build-tested on all SB600/SB700 boards, and tested on hardware on one SB600 board I own, works fine. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5833 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-21Cut the crap.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5823 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-13IEI Kino added to IEI mainboard Kconfig. I missed this in r5812Marc Jones
Signed-off-by: Marc Jones <marcj303@gmail.com> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5813 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-13IEI Kino mainboard support based on Mahogany Fam10.Marc Jones
svn copy amd/mahogany iei/kino-780am2-fam10; then apply the patch. Signed-off-by: Marc Jones <marcj303@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5812 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-07Set up an arbitrary amount of system memory on Geode LX, soAurelien Guillaume
coreboot_ram can be unpacked to 1MB. The value is quickly replaced with the real value later, thus causing no harm. Move RAMBASE to the default of 1MB for the affected boards Signed-off-by: Aurelien Guillaume <aurelien@iwi.me> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5779 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-30We call this cache as ram everywhere, so let's call it the same in KconfigStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Myles Watson <mylesgw@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5756 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-30Restructured all vendors' Kconfig files to no longer source the boards'Jens Rottmann
Kconfigs from within the choice/endchoice block. This makes it possible to define user visible board specific options. Moved all vendor names and PCI ids to the vendors' Kconfigs. Now all options in each file depend on the same symbol, so replaced all "depends on"s with a single "if". Sorted boards (sort -d), cleaned whitespace. This patch also introduces a dummy option BOARD_SPECIFIC_OPTIONS, which is always "y" and never used. It it simply needed to have something to attach the boards' "select" statements to. Signed-off-by: Jens Rottmann <JRottmann@LiPPERTEmbedded.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5754 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-26Remove unused mainboard_config definitions. Trivial.Myles Watson
Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5744 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-03Drop the USE_PRINTK_IN_CAR option. It's a bogus decision to make for any user /Stefan Reinauer
board porter: printk should always be available in CAR mode. Also drop CONFIG_USE_INIT, it's only been selected on one ASROCK board but it's not been used there. Very odd. There is one usage of CONFIG_USE_INIT which was always off in src/cpu/intel/car/cache_as_ram.inc and we have to figure out what to do with those few lines. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5682 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-07-06Re-integrate "USE_OPTION_TABLE" code.Edwin Beasant
Signed-off-by: Edwin Beasant <edwin_beasant@virtensys.com> Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5653 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-06-10This commit updates the Geode LX GLCP delay control setup from the v2 way to ↵Edwin Beasant
the v3 way. This resolves problems with terminated DRAM modules. Signed-off-by: Edwin Beasant <edwin_beasant@virtensys.com> Acked-by: Roland G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5629 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-05-14license header fixes Nils Jacobs
Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5545 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-05-09Remove pc80/serial.c includes in ROMCC boards and includePatrick Georgi
it centrally in console/console.h instead. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5538 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-05-08Drop console/console.c and pc80/serial.c from mainboards'Patrick Georgi
romstage.c. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5528 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-05-05Rename "apic" and "apic_cluster" to "lapic" and "lapic_cluster"Patrick Georgi
in device trees. Adapt sconfig as necessary. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5525 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-27Since some people disapprove of white space cleanups mixed in regular commitsStefan Reinauer
while others dislike them being extra commits, let's clean them up once and for all for the existing code. If it's ugly, let it only be ugly once :-) Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5507 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-21* clean up all but two warnings on artecgroup dbe61Stefan Reinauer
* integrate vsm init into normal x86.c code (so it can run above 1M) * call void main(unsigned long bist) except void cache_as_ram_main(void) on Geode LX (as we do on almost all other platforms now) * Unify Geode LX MSR setup (will bring most non-working LX targets back to life) Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5471 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-08Replace dual_core and quad_core CMOS (nvram) options with multi_core. Fix ↵Myles Watson
some white space. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5380 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-01- get rid of ASM_CONSOLE_LOGLEVEL except in two assembler files.Stefan Reinauer
- start naming all versions of post code output "post_code()" Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5344 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-31This patch drops arch/i386/lib/console.c and arch/i386/lib/console_print.c andStefan Reinauer
makes include/console/console.h and console/console.c usable both in __PRE_RAM__ and coreboot_ram stages. While debugging this, I removed an indirection from the e7520 ram init code (same as we did on a couple of other chipsets, removes some register pressure from romcc) Also, drop remainders of CONFIG_USE_INIT (except the one odd piece of dead code in cache_as_ram.inc) Then some ap_romstage.c fixes, at least the nvidia/l1_2pvv compiled for me with CONFIG_AP_CODE_IN_CAR set in Kconfig which it did not before. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5341 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-29This drops the ASSEMBLY define from romstage.c, tooStefan Reinauer
(since it's not assembly code, this was a dirty hack anyways) Also run awk 1 RS= ORS="\n\n" < $FILE > $FILE.nonewlines mv $FILE.nonewlines $FILE on romstage.c because my perl -pi -e 's,#define ASSEMBLY 1,,g' */*/romstage.c cut some holes into the source. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5320 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-29__PRE_RAM__ is now correctly specified in the Makefile. No need to hack it intoStefan Reinauer
romstage.c anymore Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5315 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-02-27- make HAVE_HARD_RESET match what newconfig didPatrick Georgi
- introduce BOARD_HAS_HARD_RESET and use it if a board provides hard_reset in $(MAINBOARDDIR)/reset.c, instead of some chipset component - move a couple of rules out of the mainboards' Makefiles into src/arch/i386/Makefile.inc: initobj-y += crt0.o obj-y += mainboard.o obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o obj-$(CONFIG_BOARD_HAS_HARD_RESET) += reset.o - remove Makefile.incs that are empty (or comment-only) after these changes, incl. Makefile.romccboard.inc (and references to it) - Make include not fail if Makefile.inc doesn't exist. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Myles Watson <mylesgw@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5168 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-02-25Move the ldscripts logic to src/arch/i386/Makefile.incPatrick Georgi
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Joseph Smith <joe@settoplinux.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5164 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-02-25Unify crt0s setup to src/arch/i386/Makefile.inc. This variablePatrick Georgi
is not something users have to concern themselves with anymore. Also fixes some wrong romstrap configs for boards, fixing a couple of them. Also add "make printcrt0s" target for debugging crt0s when updating modified checkouts. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5162 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-02-23Only handle code as "driver" that actually uses our driverPatrick Georgi
infrastructure (special linking, data structures, etc) Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5150 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-02-09Move all the copies of the romstage.inc rule toPatrick Georgi
src/arch/i386/Makefile.inc For that to work, I had to: - Add a CONFIG_ROMCC variable - Set that variable on all ROMCC boards - conditionally choose romcc or gcc rule based on that variable - remove those two rules from all the boards' Makefiles - switch a couple of boards to HAVE_OPTION_TABLE, as they actually have. Also remove the duplication of rules with the sole difference of if they depend on option_table.h or not. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5099 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-02-08janitor task: unify and cleanup naming.Stefan Reinauer
cache_as_ram_auto.c and auto.c are both called "romstage.c" now. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5092 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-02-07fix further build.h dependencies that were undetected before we enabled it on Stefan Reinauer
our parallel build server ;-) Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5091 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-02-07newconfig is no more.Patrick Georgi
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5089 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-02-04Move CAR settings for all GX1, GX2, LX and Intel Slot2 boards to the CPU.Stefan Reinauer
This automatically adds the settings for those boards that didn't have settings at all yet. Also, small fixup to compareboard. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> --> Please help porting all boards from newconfig to Kconfig <-- This is a lot of janitor work and we can use your helping hands. The sooner we can get rid of Kbuild, the better. The KBuild report on the mailing list shows the config differences between newconfig and Kconfig. In theory, all Kconfig configs should be equal to their newconfig pendant. In practice it's better to come close but stay clean. --> Please help porting all boards from newconfig to Kconfig <-- git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5082 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-01-30* fix crt0s/ldscripts paths to fix out of tree build.Stefan Reinauer
* fix iasl output directory for i945 boards (patch for moving it to the mainboard directory will follow) * coreboot_table.c: lb_mainboard can be static * coreboot_table.c: dump memory table in debug and spew mode * fix a warning in bootblock.c * don't include arch/i386/init in arch/i386/Makefile.inc * announce generation of crt0_includes.h * allow overriding $(obj) * drop unused src_types from Makefile * correctly use hostname -s instead of hostname for COMPILE_HOST Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5065 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-01-25Fix ACPI build on a couple of boards (now that it's active)Patrick Georgi
Fix timer handling on amd/sc520 systems Match UDELAY_* configuration of newconfig in Kconfig Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5054 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-01-25Align several kconfig options to match newconfig:Patrick Georgi
HT_CHAIN_UNITID_BASE HT_CHAIN_END_UNITID_BASE SB_HT_CHAIN_ON_BUS0 SB_HT_CHAIN_UNITID_OFFSET_ONLY MAX_CPUS MAX_PHYSICAL_CPUS ROM_SIZE TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 Also hook up asus/p2b-ds Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5051 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-01-16coreboot used to have two different "APIs" for memory accesses:Stefan Reinauer
read32(unsigned long addr) vs readl(void *addr) and write32(unsigned long addr, uint32_t value) vs writel(uint32_t value, void *addr) read32 was only available in __PRE_RAM__ stage, while readl was used in stage2. Some unclean implementations then made readl available to __PRE_RAM__ too which results in really messy includes and code. This patch fixes all code to use the read32/write32 variant, so that we can remove readl/writel in another patch. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5022 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-01-05* Explicitly add __PRE_RAM__ where it should be added.Stefan Reinauer
* Don't implicitly add __PRE_RAM__ in romcc. Fixes intel/xe7501devkit Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4998 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-26Fix iei/pcisa-lx-800-r10. Trivial.Myles Watson
Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4865 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-24Major cleanups of the hard_reset() code and config in coreboot.- supermicro/x6dhe_g/auto.c
- Drop unused "#object reset.o" entries. - Use CONFIG_HAVE_HARD_RESET for all "object reset.o" entries. - Drop dead/commented code, i.e. useless hard_reset() from: - supermicro/x6dhe_g/auto.c - supermicro/x6dhe_g2/auto.c - supermicro/x6dhe_g2/auto.updated.c - supermicro/x6dhr_ig/auto.c - supermicro/x6dhr_ig2/auto.c - digitallogic/msm586seg/auto.c - dell/s1850/auto.c - Add "obj-$(CONFIG_HAVE_HARD_RESET) += reset.o" to kconfig files of boards that actually have a reset.c file. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4849 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-20Fix all board names in Kconfig as per wiki / vendor website.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4815 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-18Drop a duplicated implementation of failover.c.Uwe Hermann
Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4807 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-17Move files from src/cpu/x86/{fpu,mmx,sse}/ to x86/Peter Stuge
Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4803 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-16Set default ROM sizes per-board to match the ROM chip that cameUwe Hermann
with the respective board. Of course, the user can still override the size in menuconfig. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4790 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-15Add CONFIG_GENERATE_* for tables so that the user can select which tables notMyles Watson
to build, but by default all the tables that are available are built. Make PIRQ table build for qemu. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4778 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-09More kconfig cleanups:Uwe Hermann
- Use "default n" for all components that shall be "select"ed. - Use "0x0" instead of "0" for hex variables for clarity and to reduce the risk of people passing integer instead of hex values to such variables. - Add TODO comments for boards that have irq_tables.c but don' set CONFIG_HAVE_PIRQ_TABLE = 1. Someone with the hardware should test enabling. - ASUS M2V-MX SE doesn't have irq_tables.c so don't define IRQ_SLOT_COUNT in its Kconfig file. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4749 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-08More kconfig:Patrick Georgi
AMD LX AMD SC520 boards by iei, pcengines, technexion, technologic, thomson Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4743 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-17 10:46:10 +0000