summaryrefslogtreecommitdiff
path: root/src/mainboard/iei
AgeCommit message (Expand)Author
2012-08-08Drop HAVE_MAINBOARD_RESOURCESKyösti Mälkki
2012-08-02AMD and GFXUMA: move setup_uma_memory() to northbridgeKyösti Mälkki
2012-07-31Revert "remove CONFIG_SERIAL_CPU_INIT"Sven Schnelle
2012-07-26Drop mainboard chip.hStefan Reinauer
2012-07-26amd/lx: Move configuration from source to KconfigPatrick Georgi
2012-07-23AMD and GFXUMA: drop redundant use of lb_add_memory_range()Kyösti Mälkki
2012-07-16Move setup_uma_memory() to AMDFAM10 northbridgeKyösti Mälkki
2012-07-16Define global uma_memory variablesKyösti Mälkki
2012-07-07IEI PM-LX-800-R11: Removed bogus Kconfig optionRicardo Martins
2012-07-06IEI PM-LX-800-R11: Added preliminary mainboard supportRicardo Martins
2012-07-02remove CONFIG_SERIAL_CPU_INITSven Schnelle
2012-05-08Clean up #ifsPatrick Georgi
2012-04-27Move top level pc80 directory to drivers/Stefan Reinauer
2012-04-20Refactor some alignment handlingPatrick Georgi
2012-04-19Fix the blank in acpi_tables.czbao
2012-03-08Unify Local APIC address definitionsPatrick Georgi
2012-02-22ACPI: More ../../.. removalPatrick Georgi
2012-02-22Remove old AMD fam10 fixme commentMarc Jones
2012-02-20IEI-Kino Fam10 MPtable fix.Dave Frodin
2012-02-20IEI Kino Fam10 ACPI table fixes.Dave Frodin
2012-02-17amd/sb700: Move HAVE_HARD_RESET to southbridgePatrick Georgi
2012-02-13AMD Geode cpus: apply un-written naming rulesKyösti Mälkki
2011-10-30remove usbdebug.h include from mainboard/romstage codeSven Schnelle
2011-10-13mptable: Refactor mptable generation some morePatrick Georgi
2011-10-13mptable: Get rid of fixup_virtual_wirePatrick Georgi
2011-07-22Update AMD SR5650 and SB700efdesign98
2011-04-20run uart_init() from console_init, just like the other console initialization...Stefan Reinauer
2011-04-19Drop baud rate init to an arbitrary baud rate from Super I/O code. ...Stefan Reinauer
2011-04-18* Set USBDEBUG_DEFAULT_PORT in all southbridges and use that valueStefan Reinauer
2011-04-11Unify use of post_codeAlexandru Gagniuc
2011-03-28SP5100's code is based on SB700. Change the legacy sb700 of sb7xx_51xx.Zheng Bao
2011-03-08Enable mahogany_fam10 and Kino family 10h to run the SB HT link at the expect...Scott Duplichan
2011-03-01Use subsystem id from devicetree.cb instead of Kconfig and moveSven Schnelle
2011-02-28Kino devicetree.cb SIO PNP devices were not matched up with theMarc Jones
2011-02-26Make AMD Fam10h CPU microcode updates optional in Expert modeXavi Drudis Ferran
2010-12-19The same mechanisms are used for normal and fallback images. Stefan Reinauer
2010-12-16Get mptable OEM/product ID from kconfig variables.Uwe Hermann
2010-12-11Following patch makes just one fadt.c file. For SB700.Rudolf Marek
2010-12-11After this has been brought up many times before, rename src/arch/i386 toStefan Reinauer
2010-12-10Add TINY_BOOTBLOCK support for AMD SB700.Uwe Hermann
2010-12-09Deduplicate various ACPI .asl files.Uwe Hermann
2010-12-08Move "select CACHE_AS_RAM" lines from boards into CPU socket.Uwe Hermann
2010-12-08second round name simplification. drop the <component>_ prefix.stepan
2010-12-08first round name simplification. drop the <component>_ prefix.stepan
2010-12-07Get rid of some unneeded function prototypes in romstage.c files.Uwe Hermann
2010-12-07Trivial. Fix typo.Zheng Bao
2010-12-06Drop unused/obsolete CONFIG_COMPRESS from a few board Kconfigs.Uwe Hermann
2010-11-22Drop per-board ram_check() calls for now.Uwe Hermann
2010-11-21Simplify a few code chunks, fix whitespace and indentation.Uwe Hermann
2010-11-21Drop excessive whitespace randomly sprinkled in romstage.c files.Uwe Hermann
2010-11-21Convert boards to use mptable_write_buses.Patrick Georgi
2010-11-21Use DIMM0 et al in lots more places instead of hardocding values.Uwe Hermann
2010-11-20Some more DIMM0 related cleanups and deduplication.Uwe Hermann
2010-11-20Unify DIMM SPD addressing. For Geode, change thePatrick Georgi
2010-11-18Fix/drop some obsolete comments,Uwe Hermann
2010-11-18Eliminate SET_NB_CFG_54 option. There was no board thatPatrick Georgi
2010-11-17This problem was introduced withTobias Diedrich
2010-11-16Move the SET_FIDVID* family of configuration options to Kconfig andPatrick Georgi
2010-11-07DSDT.asl should not report the AMD SB600/SB700 RTC as Intel PIIX4Scott Duplichan
2010-11-05Move QRANK_DIMM_SUPPORT to Kconfig, removing it from romstage.cPatrick Georgi
2010-11-05Various PIRQ/MPTABLE/ACPI Kconfig fixes.Uwe Hermann
2010-10-31Remove definitions of ACPI_SSDTX_NUM to 0, that's the default anyway.Uwe Hermann
2010-10-26We need to call smp_write_lintsrc() instead of smp_write_intsrc() forTobias Diedrich
2010-10-25Factor out common mptable code to mptable_init().Uwe Hermann
2010-10-24Running a checked build of Windows is needed for understanding its various BI...Scott Duplichan
2010-10-13Enable or disable the power button in KconfigPeter Stuge
2010-10-12We define IO_APIC_ADDR in <arch/ioapic.h>, let's use it.Uwe Hermann
2010-10-07Remove duplicate line from pci_ids.h.Jonathan Kollasch
2010-10-05- move EHCI_BAR_INDEX to ehci.h - it's constant as per EHCI spec 2.3.1Patrick Georgi
2010-10-05Remove lib/ramtest.c-include from all CAR boards.Patrick Georgi
2010-10-02Allow selecting the physical USB Debug Port on AMD SB700.Uwe Hermann
2010-10-01Move CACHE_AS_RAM_ADDRESS_DEBUG out of romstage.c into Kconfig,Patrick Georgi
2010-09-28Remove redundant HW_MEM_HOLE_SIZEK and HW_MEM_HOLE_SIZE_AUTO_INC settings.Myles Watson
2010-09-27All these boards already had the CACHE_AS_RAM option in their individualWarren Turkal
2010-09-25Drop some useless "../../../" in #includes (trivial).Uwe Hermann
2010-09-24Hook up all AMD SB600/SB700 boards to the EHCI Debug Port infrastructure.Uwe Hermann
2010-09-21Cut the crap.Uwe Hermann
2010-09-13IEI Kino added to IEI mainboard Kconfig. I missed this in r5812Marc Jones
2010-09-13IEI Kino mainboard support based on Mahogany Fam10.Marc Jones
2010-09-07Set up an arbitrary amount of system memory on Geode LX, soAurelien Guillaume
2010-08-30We call this cache as ram everywhere, so let's call it the same in KconfigStefan Reinauer
2010-08-30Restructured all vendors' Kconfig files to no longer source the boards'Jens Rottmann
2010-08-26Remove unused mainboard_config definitions. Trivial.Myles Watson
2010-08-03Drop the USE_PRINTK_IN_CAR option. It's a bogus decision to make for any user /Stefan Reinauer
2010-07-06Re-integrate "USE_OPTION_TABLE" code.Edwin Beasant
2010-06-10This commit updates the Geode LX GLCP delay control setup from the v2 way to ...Edwin Beasant
2010-05-14license header fixes Nils Jacobs
2010-05-09Remove pc80/serial.c includes in ROMCC boards and includePatrick Georgi
2010-05-08Drop console/console.c and pc80/serial.c from mainboards'Patrick Georgi
2010-05-05Rename "apic" and "apic_cluster" to "lapic" and "lapic_cluster"Patrick Georgi
2010-04-27Since some people disapprove of white space cleanups mixed in regular commitsStefan Reinauer
2010-04-21* clean up all but two warnings on artecgroup dbe61Stefan Reinauer
2010-04-08Replace dual_core and quad_core CMOS (nvram) options with multi_core. Fix so...Myles Watson
2010-04-01- get rid of ASM_CONSOLE_LOGLEVEL except in two assembler files.Stefan Reinauer
2010-03-31This patch drops arch/i386/lib/console.c and arch/i386/lib/console_print.c andStefan Reinauer
2010-03-29This drops the ASSEMBLY define from romstage.c, tooStefan Reinauer
2010-03-29__PRE_RAM__ is now correctly specified in the Makefile. No need to hack it intoStefan Reinauer
2010-02-27- make HAVE_HARD_RESET match what newconfig didPatrick Georgi
2010-02-25Move the ldscripts logic to src/arch/i386/Makefile.incPatrick Georgi
2010-02-25Unify crt0s setup to src/arch/i386/Makefile.inc. This variablePatrick Georgi
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 18:22:14 +0000