summaryrefslogtreecommitdiff
path: root/src/mainboard/hp/2760p
AgeCommit message (Collapse)Author
2018-06-28mb/*/*/cmos.layout: Fix coding styleElyes HAOUAS
Change-Id: I4f82482595b0e6c6159c6e1c66158bc18b061f04 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27216 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-05-08mb/hp: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: Ib9c0d0a85a9e38cdb1bdbcfa055e597f19cf3d5c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26087 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-03-02mb/hp: Enable additional ports at WWAN slot for ElitebooksIru Cai
2760p: enable PCIe 8470p: enable mSATA 8460p: enable PCIe, also add comments according to circuit diagram 2570p: comment for some USB ports Change-Id: Ib5209f2dfb249fca5bae89bc6da3b704c8e903dd Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/23357 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bill XIE <persmule@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-26mb/*/*/cmos.layout: Fix the values for the console levelArthur Heymans
Fix the values that were off by one. This was discovered when using postcar stage that prints with debuglevel BIOS_NEVER. Change-Id: I73a077950ed0dc735d89c9747a8da0a25f30822d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23186 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-23sb/intel/bd82x6x: Reduce function-disable messNico Huber
Most affected boards set the function disabled (FD) register to an arbitrary state dumped from systems running the vendor BIOS. This makes it impossible to enable the devices in devicetree and a pretty big mess of course because nobody cared to keep the register in sync with the devicetree. To get completely rid of most of the writes to FD, move setting of PCH_DISABLE_ALWAYS into the southbridge code where it belongs. Change-Id: Ia2a507cbcdf218d09738e2e16f0d3ad1dcf57b8b Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/23255 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hal Martin <hal.martin+coreboot@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Bill XIE <persmule@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-12-25mb/hp: Add CMOS support for all HP Elitebook modelsIru Cai
The cmos.layout files are copied from lenovo/x230 with EC options removed. It's tested on 8470p and the power_on_after_fail option works. Change-Id: I0a50a25798fd31b7acccf9872c50dac2718ce895 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/22842 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-12-20intel/bd82x6x: Use generated ACPI PIRQTobias Diedrich
Enable change Ic6b8ce4a9db50211a9c26221ca10105c5a0829a0 (sb/intel/common: Automatically generate ACPI PIRQ) for BD82X6X. This generates the main ACPI _PRT table automatically based on the chipset registers. Tested on Intel NUC DCP847SKE with Linux 4.13.14: $ cat /proc/interrupts CPU0 CPU1 0: 23 0 IO-APIC 2-edge timer 8: 1 0 IO-APIC 8-edge rtc0 9: 0 0 IO-APIC 9-fasteoi acpi 19: 86 0 IO-APIC 19-fasteoi ehci_hcd:usb1 23: 0 0 IO-APIC 23-fasteoi i801_smbus [...MSI and other interrupts skipped...] Log messages: ACPI_PIRQ_GEN PCI: 00:02.0: pin=1 pirq=1 ACPI_PIRQ_GEN PCI: 00:1b.0: pin=1 pirq=1 ACPI_PIRQ_GEN PCI: 00:1c.0: pin=1 pirq=2 ACPI_PIRQ_GEN PCI: 00:1c.1: pin=2 pirq=6 ACPI_PIRQ_GEN PCI: 00:1c.2: pin=3 pirq=4 ACPI_PIRQ_GEN PCI: 00:1d.0: pin=1 pirq=4 ACPI_PIRQ_GEN PCI: 00:1f.2: pin=1 pirq=2 ACPI_PIRQ_GEN PCI: 00:1f.3: pin=2 pirq=8 ACPI_PIRQ_GEN PCI: 00:04.0: pin=1 pirq=1 Generated _PRT: Scope (\_SB.PCI0) { Method (_PRT, 0, NotSerialized) // _PRT: PCI Routing Table { If (PICM) { Return (Package (0x09) { Package (0x04) { 0x0002FFFF, 0x00000000, 0x00000000, 0x00000010 }, Package (0x04) { 0x001BFFFF, 0x00000000, 0x00000000, 0x00000010 }, Package (0x04) { 0x001CFFFF, 0x00000000, 0x00000000, 0x00000011 }, Package (0x04) { 0x001CFFFF, 0x00000001, 0x00000000, 0x00000015 }, Package (0x04) { 0x001CFFFF, 0x00000002, 0x00000000, 0x00000013 }, Package (0x04) { 0x001DFFFF, 0x00000000, 0x00000000, 0x00000013 }, Package (0x04) { 0x001FFFFF, 0x00000000, 0x00000000, 0x00000011 }, Package (0x04) { 0x001FFFFF, 0x00000001, 0x00000000, 0x00000017 }, Package (0x04) { 0x0004FFFF, 0x00000000, 0x00000000, 0x00000010 } }) } Else { Return (Package (0x09) { Package (0x04) { 0x0002FFFF, 0x00000000, \_SB.PCI0.LPCB.LNKA, 0x00000000 }, Package (0x04) { 0x001BFFFF, 0x00000000, \_SB.PCI0.LPCB.LNKA, 0x00000000 }, Package (0x04) { 0x001CFFFF, 0x00000000, \_SB.PCI0.LPCB.LNKB, 0x00000000 }, Package (0x04) { 0x001CFFFF, 0x00000001, \_SB.PCI0.LPCB.LNKF, 0x00000000 }, Package (0x04) { 0x001CFFFF, 0x00000002, \_SB.PCI0.LPCB.LNKD, 0x00000000 }, Package (0x04) { 0x001DFFFF, 0x00000000, \_SB.PCI0.LPCB.LNKD, 0x00000000 }, Package (0x04) { 0x001FFFFF, 0x00000000, \_SB.PCI0.LPCB.LNKB, 0x00000000 }, Package (0x04) { 0x001FFFFF, 0x00000001, \_SB.PCI0.LPCB.LNKH, 0x00000000 }, Package (0x04) { 0x0004FFFF, 0x00000000, \_SB.PCI0.LPCB.LNKA, 0x00000000 } }) } } } Change-Id: I832a86925283d61b64b8268246d9e6f11994c120 Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-on: https://review.coreboot.org/22859 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-12-19mb/hp/xxx0p: set ACPI and SLPT bit in _WAK and _PTSIru Cai
ACPI bit is not set after an S3 resume, so set it in _WAK. Setting SLPT bit can make the power LED blink in S3. Change-Id: I2badc69510275df57938cb8607b3c4e0df50f028 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/22929 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-09-02mb/hp: Enable ExpressCard hotplug in all ElitebooksIru Cai
The MPC.HPCE bit of the ExpressCard root port is not set in vendor firmware, so autoport didn't generate the right pcie_hotplug_map to support ExpressCard hotplug. Also add comments for each PCIe root port. Change-Id: Ic53e36a7192b9bfa8ff9fca57f4556e972e2611b Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/21310 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-18mainboard/hp: Add HP Elitebook 2760pIru Cai
The code is generated by autoport. The flash chip is socketed beside the WLAN slot. The EHCI debug port is on right side of the laptop beside the RJ11 connector. Things that work: - memory: 0+8G, 4G+8G - Linux (Linux Mint 18.1 with Linux 4.4) - native graphics init + SeaBIOS payload with SeaVGABIOS - all 3 USB ports - WLAN - WWAN - SD card reader - expresscard - S3 suspend and resume - internal flashing after IFD is unlocked and coreboot is flashed - keyboard, trackpoint and touchpad - fan control - AC and battery status Issues: - Wacom digitizer does not work (even after I add it in DSDT) - GRUB payload will freeze (in all Elitebooks, including chainloading GRUB from SeaBIOS) Things that are not tested: - smart card reader - cable modem (EC) blobs: This laptop uses SMSC KBC1126-NU as EC. It needs two blobs in the flash chip. You can use the tools in util/kbc1126 to extract them from OEM firmware, and use the following configuration to insert them to coreboot image: -> Chipset -> Add firmware images for KBC1126 firmware Change-Id: I3ffdb9f9c71f6c9a84e896abc3c424c8dd4bed0e Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/18241 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>