summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Collapse)Author
2022-09-21mb/google/brya/var/crota: set tcc_offset value to 1 ℃Johnny Li
Set tcc_offset value to 1℃ in devicetree for Thermal Control Circuit (TCC) activation feature. This value is suggested by Thermal team. BUG=b:246913963 TEST=USE="project_crota project_brya" emerge-brya coreboot Signed-off-by: Johnny Li <johnny_li@wistron.corp-partner.google.com> Change-Id: Ie2f60bed34fbd6fa3624be60138511a22b199a8d Reviewed-on: https://review.coreboot.org/c/coreboot/+/67708 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2022-09-20mb/google/dedede: Resume from suspend on critical batteryIvan Chen
This patch makes dedede EC wake up AP from s0ix when the state of charge drops to low_battery_shutdown_percent. Demonstrated as follows: 1. Boot OS. 2. Run powerd_dbus_suspend. 3. On EC, run battfake 4. 4. System resumes. BUG=b:244253629 TEST=Verified on dedede Change-Id: I39234d2b9e739383b5f96be49077f8c9831fa0fa Signed-off-by: Ivan Chen <yulunchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67320 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-09-20mb/google/brya/variants/skolas: Set power limit valuesSumeet Pawnikar
Skolas board is based on Raptor Lake SoC, not Alder Lake. The code change sets CPU power limit values as performance configuration based on various Raptor Lake SoC SKUs as per the document #686872. BUG=b:242869605 BRANCH=None TEST=Built and tested on skolas board Change-Id: Ieb3ca4ff77039412ef56da49e1b438f5e0b9db02 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67375 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2022-09-20mb/google/brask/variants/moli: enable ddc on DDI_PORT_2Raihow Shi
Enable ddc on DDI_PORT_2 for support DP++. BUG=b:240382609 TEST=emerge-brask coreboot. Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com> Change-Id: I475e3c0278cfa92ab40ad84f6da580b4cded9933 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67663 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-09-20mb/google/dedede/var/boten: Turn off camera during S0ixKarthikeyan Ramasubramanian
Add a variant specific S0ix hook to fill the SSDT table to disable and enable camera during suspend and resume respectively. BUG=b:206911455 TEST=Build Boten BIOS image. Ensure that camera is disabled during suspend and enabled during resume. Change-Id: I3229b22b8d8651bf2d9df25b10ce6749efde7cf6 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67388 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Maulik Vaghela <maulikvaghela@google.com>
2022-09-20mb/google/rex: Add WWAN ACPI supportIvy Jian
Add FM350GL 5G WWAN support using drivers/wwan/fm and additional PM features from RTD3. BUG=b:244077118 TEST=check cbmem -c \_SB.PCI0.RP06: Enable RTD3 for PCI: 00:1c.5 (Intel PCIe Runtime D3) \_SB.PCI0.RP06: Enable WWAN for PCI: 00:1c.5 (Fibocom FM-350-GL) check PXSX Device is generated in ssdt. Signed-off-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Change-Id: I6114c589769d2eca882cf1a5255cf4c5937121a6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67336 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-09-20mb/google/nissa/var/xivu: Add supported new memory partIan Feng
Add new ram_id:3 (0011) for memory part K3LKCKC0BM-MGCP. DRAM Part Name ID to assign K3LKCKC0BM-MGCP 3 (0011) BUG=b:247039096 TEST=Use part_id_gen to generate related settings and emerge-nissa coreboot Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: I78d2e501b9d8d801a3d149002f638125bf4275f5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67676 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-by: Reka Norman <rekanorman@chromium.org>
2022-09-19mb/google/brya/var/skolas: Add MIPI WFC supportAlanKY Lee
Modify config settings based on new module KBAE350 spec BUG=b:245640845 BRANCH=None TEST=Build and boot on skolas Signed-off-by: AlanKY Lee <alanky_lee@compal.corp-partner.google.com> Change-Id: I8a9bee9bb79bda4e3f1d259716844b42a7fce397 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67567 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jimmy Su <jimmy.su@intel.corp-partner.google.com> Reviewed-by: Amanda Hwang <amanda_hwang@compal.corp-partner.google.com> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
2022-09-19skyrim/overridetree: Add "Throttle" DPTC valuesTim Van Patten
Add the Low/No Battery Mode DPTC values for Skyrim. These values were generated by AMD. BRANCH=none BUG=b:217911928 TEST=Build skyrim Signed-off-by: Tim Van Patten <timvp@google.com> Change-Id: I5f277761cb7379b4344492f95010d8d5ddd689fb Reviewed-on: https://review.coreboot.org/c/coreboot/+/67693 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-19mb/google/skyrim: Add "Normal" DPTC valuesTim Van Patten
Add the Normal Mode DPTC values for Skyrim. These values were generated by AMD. BRANCH=none BUG=b:217911928 TEST=Build skyrim Signed-off-by: Tim Van Patten <timvp@google.com> Change-Id: I1e1f55b941f3e70aad33d55a90fb012eac3ba12d Reviewed-on: https://review.coreboot.org/c/coreboot/+/67690 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-19mb/google/rex: Add ELAN6918 touchscreenSubrata Banik
ELAN6918 Power Sequencing seems not perfectly matching with the previous platforms and setting GPP_C06 to high prior to the power sequencing is actually makes it work. Ideally Power Sequencing should be as below for ELAN6918 (in ACPI) `POWER enabled -> RESET deasserted -> Report EN enabled` But below sequence is only working currently: `Report EN enabled (ramstage) -> POWER enabled (ACPI) -> RESET deasserted (ACPI)` BUG=b:247029304 TEST=Verified ELAN touch panel is working as expected after booting Google/rex device to ChromeOS. Change-Id: Ideaeb0faa882b8e603534bbface51ea76923d436 Signed-off-by: Eran Mitrani <mitrani@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66990 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2022-09-19mb/google/brya/var/brya4es: deprecate brya4esNick Vaccaro
The brya4es variant is no longer needed, removing code for brya4es. BUG=b:246611270 TEST=None Change-Id: I9b222f89fe766c63158518713be19d7959451721 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67667 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2022-09-16mb/google/nissa/var/nivviks: Enable nau8825 ADCOUTEric Lai
Enable nau8825 ADCOUT to make I2S signal meet spec. BUG=b:234789689 TEST=I2S waveform can meet spec timing. Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: I7ea472ac4e4add4e790b9b3fbb6becd40665eb1a Reviewed-on: https://review.coreboot.org/c/coreboot/+/67660 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2022-09-16mb/google/rex: Enable `DRIVERS_WIFI_GENERIC` configSubrata Banik
TEST=Able to build and boot the Google/rex. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Iae5317b24856ef2cbd2f36cc28f645826536c21a Reviewed-on: https://review.coreboot.org/c/coreboot/+/67641 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
2022-09-15zork: Control DPTC with only KconfigTim Van Patten
Moving the config value SOC_AMD_COMMON_BLOCK_ACPI_DPTC to soc/amd/picasso/Kconfig and conditionally enabling it for only Morphius boards makes the value dptc_tablet_mode_enable redundant. This CL removes dptc_tablet_mode_enable so DPTC is controlled entirely with the Kconfig value SOC_AMD_COMMON_BLOCK_ACPI_DPTC. This means DPTC is only included for boards that actually enable it. BRANCH=none BUG=b:217911928 TEST=Build zork Signed-off-by: Tim Van Patten <timvp@google.com> Change-Id: Ic54a9bb491234088be8184bec8b09e2e31ffa298 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67635 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-09-15mb/google/mistral/verstage.c: Change loglevel prefixElyes Haouas
BIOS_ERR is inappropriate since the message is informational. Use BIOS_INFO instead. Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Change-Id: I91be3f47ae93c8262e430a06cacec3d2c29ebd58 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67539 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-09-14zork/Kconfig: Move SOC_AMD_COMMON_BLOCK_ACPI_DPTCTim Van Patten
Move enabling SOC_AMD_COMMON_BLOCK_ACPI_DPTC from soc/amd/picasso/Kconfig to mainboard/google/zork/Kconfig and conditionally enable it only for Morphius boards. This reduces which boards/variants have DPTC enabled to only those that actually use it. BRANCH=none BUG=b:217911928 TEST=Build zork Signed-off-by: Tim Van Patten <timvp@google.com> Change-Id: Iddebcf5dbadae135c8110e2afd9ad76ef7dcc09d Reviewed-on: https://review.coreboot.org/c/coreboot/+/67637 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-14mb/google/kahlee: drop unused and incorrect irq_tables.cFelix Held
This file is neither included in the build nor correct, since the Stoneyridge SoC doesn't have a legacy PCI bridge on bus 0 bridge 0x14 function 4. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I0daed891984faed9fbc36f0215edfc56e0ae14a7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67633 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2022-09-14mb/google/skyrim/winterhold: Use 'detect' vs 'probed' for touchpadsMatt DeVillier
As of commit 2cf52d80a6ec ("mb/*/{device,override}tree: Set touchpads to use detect (vs probed) flag") all touchpads in the tree have been switched from using the 'probed' flag to 'detect.' Winterhold was added in between the time that patch was pushed and merged, so switch these instances over too. Change-Id: I34e1265ecd6409f720ae486926c5078f626fc693 Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67487 Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-14mb/google/dedede/variants/shotzo: Turn off LAN power in S0ixTony Huang
Turn off the LAN power which is controlled by GPP_A10 in S0ix states. For an USB device, the S0ix hook is needed for the on/off operationas to take place. BUG=b:245426120 BRANCH=firmware-dedede-13606.B TEST=emerge-shotzo coreboot check LAN LED off in S0ix states check LAN function ok after suspending 500 loops check SSDT table has MS0X entry Scope (\_SB) { Method (MS0X, 1, Serialized) { If ((Arg0 == One)) { \_SB.PCI0.CTXS (0x41) } Else { \_SB.PCI0.STXS (0x41) } } } Change-Id: I3fcab4a73239b4f006839c0c81e9b4cc74047b77 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67528 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-09-14mb/google/geralt: Raise little core CPU frequency from 500MHz to 2GHzRex-BC Chen
To improve boot time, raise little CPU from 500MHz to 2GHz at romstage (before DRAM calibration). FW logs: Check CPU freq: 1999968 KHz, cci: 1600012 KHz TEST=cpu freq and cci freq run correctly. BUG=b:244251006 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Ic1bed53669baa15f797c9a952455376a39d29cf3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67544 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-14timer: Change timer util functions to 64-bitRob Barnes
Since mono_time is now 64-bit, the utility functions interfacing with mono_time should also be 64-bit so precision isn't lost. Fixed build errors related to printing the now int64_t result of stopwatch_duration_[m|u]secs in various places. BUG=b:237082996 BRANCH=All TEST=Boot dewatt Change-Id: I169588f5e14285557f2d03270f58f4c07c0154d5 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66170 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-09-14mb/google/rex: Add audio parts ALC5682I-VS and MAX98357Eran Mitrani
BUG=b:232573696 TEST=Able to verify audio playback on Google/Rex with this change. Change-Id: Ia8dfc79e7e4d27828726145156c870733d716899 Signed-off-by: Eran Mitrani <mitrani@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66919 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-13mb/google/dedede: Generate MS0X entry and provide variant hookTony Huang
BUG=b:245426120 BRANCH=firmware-dedede-13606.B TEST=emerge-dedede coreboot check SSDT table has MS0X entry Scope (\_SB) { Method (MS0X, 1, Serialized) { If ((Arg0 == One)) {} Else { } } } Change-Id: Id01089531503e62231c5ab19e4cd8056198b9acb Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67373 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-09-13mb/google/poppy/nami: Add 'detect' flag for Elan touchpadMatt DeVillier
Add the 'detect' flag to the Elan touchpad, so coreboot can determine which touchpad type is present at runtime and generate the correct ACPI entry for it (the Synaptics touchpad already has the flag). Test: build/boot google/nami, verify touchpad works under Linux/Windows Change-Id: I437d1d470552d55496dfe611f441331127c64250 Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67306 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-09-13sc7180: Fix DDR training failure during warm reset with OTAVenkat Thogaru
Problem: OTA is triggering warmboot, where DDR is in self-refresh mode. Due to which DDR training is not going well. Change: Verify reboot type in case of OTA. If it is warmboot, will force for cold boot inorder to trigger DDR training BUG=b:236990316 TEST=Validated on qualcomm sc7180 development board. Test observation: Cold boot is triggered forcefully, if current reboot is warmboot in case of OTA Signed-off-by: Venkat Thogaru <quic_thogaru@quicinc.com> Change-Id: I908370662292d9f768d1ac89452775178e07fc78 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67406 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-12mb/google/skyrim: Enable ASPMFred Reitberger
Enable Kconfig options for ASPM. TEST=Verify ASPM is enabled with `lspci -vvv`, `suspend_stress_test -c 10` passed all 10 times BUG=b:243771794 Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: I54071d9c9607da4561d745d152924d56904c0fee Reviewed-on: https://review.coreboot.org/c/coreboot/+/67444 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2022-09-12mb/google/skyrim/port_descriptors.c: Update ASPM configurationFred Reitberger
Update ASPM configuration, disabling ASPM for the SSD due to s0i3 issues. Bug b:245550573 created to track the SSD issue. TEST=Boot to OS and verify suspend via `suspend_stress_test -c 10` BUG=b:243771794 Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: I45a290c8ceddd39f65c6fe1390e3a753cad99899 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67304 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2022-09-12mb/google/kahlee/irq_tables.c: Use ALIGN_UP macroElyes Haouas
Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Change-Id: I4ccdd370d3e9aef938fae4c4690ec0bf4c53c500 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67517 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-09-12mb/google/brya/acpi: Move dGPU power checks earlierTim Wawrzynczak
Linux always "turns on" a PowerResource when it boots, regardless of _STA, so the _ON routine should be idempotent. In this case, it all is, except for the LTR restore, which would restore a value of 0 when _ON is run the first time, which means that LTR is disabled on the root port from then on, as the save/restore routines will keep saving/restoring that 0. THis patch fixes the problem by moving the power checks from PGON/PGOF to GCOO/GCOI. BUG=b:244409563 TEST=boot agah and verify that LTR is still enabled on the root port Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I4ed78323608eede5b8310598f1f1115497ab2b5b Reviewed-on: https://review.coreboot.org/c/coreboot/+/67278 Reviewed-by: Cliff Huang <cliff.huang@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2022-09-12mb/google/brya/acpi: Remove erroneous _PR0/_PR3Tim Wawrzynczak
The Linux kernel runtime D3 framework expects a PCIe device to have a power resource in order to be properly power-manageable. The _PR0/_PR3 values were pointing at the PEG0 Device, which is not a PowerResource, so this must have confused the RTD3 framework and RTD3 was not functional. Removing the _PR0/_PR3 fixes the problem. BUG=b:243888246 TEST=echo auto > /sys/bus/pci/devices/0000:01:00.0/power/control; sleep 10; echo on > /sys/bus/pci/devices/0000:01:00.0/power/control After this there are no longer errors seen in dmesg about failing to place the device into D0. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I83fa1e5fabd3257b097c10e7a13c9861872685ea Reviewed-on: https://review.coreboot.org/c/coreboot/+/67212 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Cliff Huang <cliff.huang@intel.com> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-09-12mb/google/brya/acpi/power: Clean up ASL codeTim Wawrzynczak
Mostly there are too many extraneous `\_SB.PCI0.` prefixes, also a few minor cleanups, but nothing functional. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I79d919d2f04f57232f8f6a4e4d0690833faeb834 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66810 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2022-09-12mb/google/brya/acpi: Save/restore/clear some registers over GCOFFTim Wawrzynczak
Similar to the prior CL (commit db8ad5e), do the same register dance before/after GCOFF. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I8fecba40c5a5af11e24f82db07face3ce10481bf Reviewed-on: https://review.coreboot.org/c/coreboot/+/67086 Reviewed-by: Anil Kumar K <anil.kumar.k@intel.corp-partner.google.com> Reviewed-by: Cliff Huang <cliff.huang@intel.com> Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-12soc/amd: Refactor DPTC Tablet ModeTim Van Patten
Refactor AMD DPTC tablet mode in preparation for adding low/no battery DPTC settings. 1. Refactor and simplify acpigen_write_alib_dptc() into the following functions: - acpigen_write_alib_dptc_default() - acpigen_write_alib_dptc_tablet() 2. Add device tree register value dptc_tablet_mode_enable to control whether DPTC tablet mode is enabled for a variant. 3. Add dptc.asl to perform the necessary ACPI checking before modifying the DPTC settings. BRANCH=none BUG=b:217911928 TEST=Build zork TEST=Build nipperkin TEST=Boot skyrim Change-Id: I2518fdd526868c9d5668a6018fd3570392e809c0 Signed-off-by: Tim Van Patten <timvp@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66994 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-09-10mb/google/rex: Complete several remaining GPIO configsTarun Tuli
Lists of GPIO PINS being updated: SPKR_INT_L_R RST_HP_L SOC_HDMI_HPD_L SOCHOT_ODL SOC_FPMCU_INT_L EN_PP3300_WLAN BUG=b:24410269 TEST=Build and boot Google/Rex to ChromeOS. Change-Id: If2fb354f931217c09a6c1c81ca780cb121b24468 Signed-off-by: Tarun Tuli <taruntuli@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67449 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-10mb/google/rex: Enable touchpadKapil Porwal
Enable touchpad for Google Rex. BUG=b:245866939 TEST=Build and boot to Google Rex. Verify touchpad works. Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: I49fdd72bf3350085e82411b95edcd6a9a09d2df5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67471 Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Shaunak Saha <shaunak.saha@intel.corp-partner.google.com>
2022-09-10mb/google/rex: Add GPE route for GPP_BKapil Porwal
Add GPE route for GPP_B. BUG=b:245866939 TEST=Build and boot to Google Rex. Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: I28066a6cc75908f8ceefbdbf8c088c56833606ea Reviewed-on: https://review.coreboot.org/c/coreboot/+/67469 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Shaunak Saha <shaunak.saha@intel.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-09-09mb/google/brya: Invoke power cycle of FPMCU on startupTarun Tuli
Add functionality such that the FPMCU is power cycled and has its reset sequenced on boot. This has been added such that we do not need to update the bootblock. We are required to do this as bootblock exists in read-only flash for devices that have already been manufactured and so have no method of updating the sequencing there. Power remains off during coreboot (after briefly being turned on in the unchangeable bootblock). Once control is handed over to the Kernel, it takes care of sequencing the power and reset appropriately and ensures the FPMCU is unpowered for >200ms on boot. BUG=b:240626388 TEST=Confirmed FPMCU is still functional on Vell and Anahera. Confirmed power is off for approximately 6 seconds on boot (target >200ms). Confirmed reset is de-asserted approx 5ms after power application (target >2.5ms) Change-Id: I9694f8837e0a72eaed42a5eeee92b0f120269086 Signed-off-by: Tarun Tuli <taruntuli@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66915 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-09-09mb/google/nissa: Disable the stylus GPIO pins based on fw_configV Sowmya
TEST=Boot to OS on nivviks/nirwen and check that stylus GPIOs are configured based on fw_config. Signed-off-by: V Sowmya <v.sowmya@intel.com> Change-Id: Ibbe9f379abe10a741642e11d4833d3a53489693a Reviewed-on: https://review.coreboot.org/c/coreboot/+/66929 Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-09mb/google/dedede/var/shotzo: Config I2C times for touchscreen/audioTony Huang
Config I2C high / low time in device tree to ensure I2C CLK runs accurately at I2C_SPEED_FAST (400 kHz). EE measured touchscreen/audio runs at 385.5/397.9kHz after tuning. BUG=b:244403643 BRANCH=firmware-dedede-13606.B TEST=Build and check after tuning I2C clock is under 400kHz Change-Id: I7d9503e5f92295432e31f09ae791eaa18eac9d4d Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67242 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com>
2022-09-09mb/google/brya/var/skolas4es: Configure _DSC for camera devicesBora Guvendik
Configure _DSC to ACPI_DEVICE_SLEEP_D3_COLD so that the driver skips initial probe during kernel boot and prevent privacy LED blink. BUG=b:194979741 BRANCH=firmware-brya-14505.B TEST=Build and boot skolas to OS. Verify entries in SSDT. Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: I3c32dd71ab454227b15913bda7f542230e5568db Reviewed-on: https://review.coreboot.org/c/coreboot/+/67021 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-09-09mb/*/{device,override}tree: Set touchpads to use detect (vs probed) flagMatt DeVillier
Historically, ChromeOS devices have worked around the problem of OEMs using several different parts for touchpads/touchscreens by using a ChromeOS kernel-specific 'probed' flag (rejected by the upstream kernel) to indicate that the device may or may not be present, and that the driver should probe to confirm device presence. Since c636142b, coreboot now supports detection for i2c devices at runtime when creating the device entries for the ACPI/SSDT tables, rendering the 'probed' flag obsolete for touchpads. Switch all touchpads in the tree from using the 'probed' flag to the 'detect' flag. Touchscreens require more involved power sequencing, which will be done at some future time, after which they will switch over as well. TEST: build/boot at least one variant for each baseboard in the tree. Verify touchpad works under Linux and Windows. Verify only a single touchpad device is present in the ACPI tables. Change-Id: I47c6eed37eb34c044e27963532e544d3940a7c15 Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67305 Reviewed-by: Sean Rhodes <sean@starlabs.systems> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-09-08mb/google/grunt: Enable AC wakeDaisuke Nojiri
This patch enables AC plug/unplug for resume. BUG=b:188457962 BRANCH=grunt TEST=Verified AC plug/unplug wakes up Treeya. Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Change-Id: I10480f8224b909fefe42d46d7c03fc9d3fe5abfe Reviewed-on: https://review.coreboot.org/c/coreboot/+/67389 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-09-08mb/google/zork: Enable AC wakeDaisuke Nojiri
This patch enables AC plug/unplug as resume signals. BUG=b:188457962 BRANCH=Zork TEST=Verified AC plug wakes up Ezkinil. Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Change-Id: Ib1af6ff9f18544ec6a86e34588fb4d9e8cd3bab2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67262 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2022-09-08mb/google/brya/var/kinox: Update the DPTF parameters and fan tableDtrain Hsu
Follow the Thermal_paramters_list-0902.xlsx to modify DPTF parameters and fan table. 1. Modify CRT of TSR0 - TSR3 to 97. 2. Modify TCC offset to 6. 3. Update new fan table. BUG=b:244657172 TEST=emerge-brask coreboot Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: I751bc5442f64428c383034755cd5d74fbd0ea91e Reviewed-on: https://review.coreboot.org/c/coreboot/+/67314 Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-08mb/google/brya/var/kinox: Modify fan speed/duty tableDtrain Hsu
Modify fan speed/duty table follow "Duty table.xlsx". BUG=b:244262869 TEST=Boot to ChromeOS. Using SDV system, enter duty value, and then system feedback fan speed. Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: Id5e885b96624d5fc31f1d42e3582c3ab01e08458 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67307 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-by: Ricky Chang <rickytlchang@google.com> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2022-09-08mb/google/rex: Add WWAN poweron sequencingIvy Jian
The PCIe WWAN module used on rex requires control over 4 signals to successfully power it on. It is desirable to do this before passing control to the payload, because the modem requires a ~10 seconds initialization phase before it can be used. The corrected sequence looks like: 1) Drive device into full reset and enable power in bootblock 2) Deassert FCPO in romstage, after power rails stabilize 3) Deassert WWAN_RST#, then WWAN_PERST# in ramstage BUG=b:244077118 TEST=FM350 could be enumerated via lspci Measured signals to check start-up Timing Sequence, tpr/ton1/ton2. Tpr = 572mS Ton1 = 6.3s Ton2 = 6.3+4.17ms Signed-off-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Change-Id: I6cda9348ef7f54efe5ba2358040596a1c2da1b13 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67332 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-08guybrush: remove RO_GSCVD area from FMAPHimanshu Sahdev
This area relates to storing of AP RO verification information. CONFIG_VBOOT_GSCVD is enabled by default for TPM_GOOGLE_TI50 and guybrush is using TPM_GOOGLE_CR50. Signed-off-by: Himanshu Sahdev <himanshu.sahdev@intel.com> Change-Id: I896b871bf2ac64e334514b979add9b8ac2c43945 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67376 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-by: Harsha B R <harsha.b.r@intel.com>
2022-09-08src: De-conflict CALIBRATION_REGION definitionsMartin Roth
Change the name of the CALIBRATION_REGION definitions used in two separate locations. This conflict was causing an error for the lint-001-no-global-config-in-romstage test. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: If6734f2a7d9be669586ea350fb9979fcd422b591 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67382 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-09-07amd: Convert dptc_enable to boolTim Van Patten
dptc_enable is being treated as a bool, so convert to explicitly be a bool. BRANCH=none BUG=b:217911928 TEST=Build zork TEST=Build guybrush TEST=Build skyrim Change-Id: I0e93d892b3b8016221812c8b9ec6c257dcf13ef5 Signed-off-by: Tim Van Patten <timvp@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67188 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-07mb/google/geralt: Pass reset gpio parameter to BL31Bo-Chen Chen
Pass the reset gpio parameter to BL31 to support SoC reset. TEST=build pass. BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Ifdfbd6bd82f64b084f6349cb617443053c89a3f1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67357 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-07soc/mediatek: a common implementation to register BL31 resetHung-Te Lin
The implementations of register_reset_to_bl31() are the same for MedaiTek platforms, so we extract them to soc/common/bl31.c. BUG=None TEST=build pass Change-Id: I297ea2e18a6d7e92236cf415844b166523616bdf Signed-off-by: Hung-Te Lin <hungte@chromium.org> Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67359 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-09-07mb/google/corsola: Fix ANX7625 power-on T4 sequenceZanxi Chen
The T4 of ANX7625 power on sequence should be larger than 0ms, but it's -59ms now. So add 70ms delay between DSI_TE and LCM_RST. BUG=b:242352915 TEST=The sequence T4 is larger than 0ms when power on. Change-Id: I6b888707ec3c0612e396564e77c4cdbe92614dc5 Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67315 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: wen zhang <zhangwen6@huaqin.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-09-06mb/google/skyrim/var/winterhold: Update devicetree settingEricKY Cheng
Initialize winterhold devicetree. BUG=b:241196632 TEST=emerge-skyrim coreboot Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com> Change-Id: I9fe224cdc2acb1f13d3bf9341b487892c15f8ea2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67308 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2022-09-06mb/google/skyrim/var/winterhold: Add gpio override settingsEricKY Cheng
Follow FT6_SOC_GPIO_PM&Strap_20220815A.XLSX update Gpio setting BUG=b:240824497 BRANCH=None Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com> Change-Id: I2086c326cbf46ba6378d18d37dcbbe9fafa6b2bc Reviewed-on: https://review.coreboot.org/c/coreboot/+/67209 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-09-04mb/google/rex: Correct GPSI0 muxing for pads requiring NF8Tarun Tuli
GSPI0 pads required muxing to NF8. Support for extended native functions was added in commit b6c32d7fe4ea98ba8b3a10cb5ce46448801855b8 BUG=b:244610269 TEST=build and booted on Rex Change-Id: Iab4e0bc6890cd8e976c513fe87dda0da9b5f2ee0 Signed-off-by: Tarun Tuli <taruntuli@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67317 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
2022-09-04mb/google/brya/var/ghost: Delete variantJack Rosenthal
This project concluded and the coreboot implementation is no longer required. BUG=b:244596639 BRANCH=firmware-brya-14505.B TEST=none Signed-off-by: Jack Rosenthal <jrosenth@chromium.org> Change-Id: Ie647dac7ad4879ec1b11baa0a8cb0990af56852f Reviewed-on: https://review.coreboot.org/c/coreboot/+/67299 Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-04mb/google/dedede/var/shotzo: Update DPTF parametersTony Huang
Update DPTF parameters from internal thermal team. BUG=b:244373677 BRANCH=firmware-dedede-13606.B TEST=Build image and verified by thermal team. Change-Id: I8415e0d25a79764f0c1d11688728b7caa3b3d6a4 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67214 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2022-09-02mb/google/skyrim: Remove elog_gsmi_cb_mainboard_log_wake_sourceRaul E Rangel
elog_gsmi_cb_mainboard_log_wake_source is called from SMI and causes eSPI transactions. If the SMI interrupts an ongoing eSPI transaction from the OS it will conflict and cause failures. Removing this call to avoid conflicts. This can be re-enabled after refactoring google_chromeec_get_mask to use ACPI MMIO. This is a copy of CB:63280 but for skyrim. BUG=b:227163985, b:243557044 TEST=suspend/resume skyrim and no longer see EC wake sources in elog. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Iac56840fe15101bc556d8cce9960f761c6ea7181 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67184 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jon Murphy <jpmurphy@google.com>
2022-09-02mb/google/rex: Enable DSP UPDEric Lai
Enable DSP setting. Make sure the SSP can work as expected. BUG=b:243123156 TEST=Dev beep working on Rex. Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: I6ae28e414ac4ac33f596df57691c979eac5fe132 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67270 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2022-09-01mb/google/guybrush: select SYSTEM_TYPE_LAPTOPMatt DeVillier
Select SYSTEM_TYPE_LAPTOP so the FADT PM profile is correctly set to mobile (vs the default of desktop). TEST=build/boot google/dewatt, run FWTS and verify FADT PM profile correct Change-Id: I480fbe85782e2c63efa8d2212d503a47d8149ab9 Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67245 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-09-01mb/google/skyrim: Add missing USB ports to device treeRaul E Rangel
As part of investigating b/240690391 I noticed that we were missing the daughter board ports. Not all SKUs have these ports connected, but it doesn't hurt to have the extra ACPI nodes. BUG=none TEST=build Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Id6fc34acbfa30bc15e697043bf93bcf584256128 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66605 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jon Murphy <jpmurphy@google.com>
2022-09-01mb/google/brya/acpi: Save/restore/clear some registers over GC6Tim Wawrzynczak
Nvidia recommends saving and restoring the LTR Enable bit in PCIe config space for the PCIe root port before/after GC6 entry. Also the detectable error bit should be cleared, as there may be errors expected during the GC6 flow. BUG=b:214581763 TEST=no more correctable errors after GC6 entry/exit Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I058ce1b3f17fb6cc59785a85efaf9ea0504cf2ee Reviewed-on: https://review.coreboot.org/c/coreboot/+/66808 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Anil Kumar K <anil.kumar.k@intel.corp-partner.google.com> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
2022-09-01mb/google/nissa: Mark PCIe wifi device as untrustedReka Norman
BUG=b:238937091 TEST=Dump SSDT on nereid and check that the wifi device contains the DmaProperty. Also check that the kernel marks the device as untrusted. Change-Id: I0725ea18d52420a3161d6fcfa3bcb72ebe35f3a5 Signed-off-by: Reka Norman <rekanorman@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67194 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2022-08-31acpi: Replace EC_ENABLE_AMD_DPTC_SUPPORT with Kconfig valueTim Van Patten
Compile-time support of DPTC is controlled by EC_ENABLE_AMD_DPTC_SUPPORT in each variant's ec.h file. This CL removes EC_ENABLE_AMD_DPTC_SUPPORT and replaces it with the Kconfig value SOC_AMD_COMMON_BLOCK_ACPI_DPTC. Each variant's run-time support of DPTC continues to be controlled by the variant's overridetree.cb "dptc_enable" value. BRANCH=none BUG=b:217911928 TEST=Build zork TEST=Boot skyrim Signed-off-by: Tim Van Patten <timvp@google.com> Change-Id: Ic101e74bab88e20be0cb5aaf66e4349baa1432e3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67180 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-08-31mb/google/rex: Correct EC-is-trusted logicKapil Porwal
Fix EC_IN_RW config for Rex. Dauntless on Rex does not have an EC_IN_RW GPIO pin. Port of commit 7f339c6050c5 ("mb/google/corsola: Correct EC-is-trusted logic") BUG=b:243950850 TEST=Built and booted to Google Rex. Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: I97e5c752b4f36c9221137903f755837880f6b1c4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67208 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2022-08-31Revert "mb/google/rex: Disable LID_SHUTDOWN"Subrata Banik
This reverts commit 47fee08fc3a383e14dc974754d6e463fa320badf. The required EC changes are now in place to revert this W/A that disables the LID based shutdown. BUG=b:243920003 TEST=No shutdown request has triggered while booting AP at depthcharge. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I5ae56912f030f6f0e3cb49282bbffc920fb389c0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67206 Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
2022-08-30mb/google/skyrim: Fix APCB_SBR_D5.gen build rulesKarthikeyan Ramasubramanian
CB:66978 introduced an incorrect condition to check for the presence of SPD binaries to be injected into APCB_SBR_D5.gen. This caused the SPDs to be not injected into the APCB and hence the system fails to boot. Fix it by updating the path of the SPD binaries correctly. BUG=b:244173966 TEST=Build and boot to OS in Skyrim. Change-Id: I5efa634fafdcc4769dfad5f533d5512e7c03644f Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67210 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-08-30mb/google/nipperkin: Set BT enable_delay_ms to 10msRob Barnes
Override bluetooth enable_delay_ms to 10ms, per advise from vendor. BUG=b:233369179 BRANCH=guybrush TEST=Boot nipperkin, connect to headset, suspend and reboot, headset still functions. Change-Id: Ic00de6704018f27339512929f85531aa72205b0e Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67177 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jon Murphy <jpmurphy@google.com>
2022-08-30mb/google/guybrush: Set BT enable_delay_ms to 200msRob Barnes
Set bluetooth enable_delay_ms to 200ms. 200ms is the lowest common denominator between the two BT chipsets. BUG=b:233369179,b:236289478 BRANCH=guybrush TEST=Connect to headset, suspend and reboot, headset still functions Change-Id: Id4c23de37351d28d02aaa797fa19ff49e9dfa76c Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65180 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jon Murphy <jpmurphy@google.com>
2022-08-30mb/google/brya/variants/nivviks: Define DPTF policies for NirwenVidya Gopalakrishnan
Added DPTF passive, critical, active policies for Nirwen. Added additional TSR for Nivviks and updated the PL2 time window Ref: EDS doc#645550 BUG=b:238713292 TEST= Boot to OS and verify dptf policies are set based on fw_config. Signed-off-by: Vidya Gopalakrishnan <vidya.gopalakrishnan@intel.com> Change-Id: Iae46736d8d7723a20983dcaad42a7007d76cfad8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66833 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2022-08-30mb/google/nissa: Configure the DPTF policies based on fw_configV Sowmya
This change adds support to configure the DPTF policies based on the fw_config THERMAL_SOLUTION. BUG=b:238713292 TEST=Boot to OS and verify that dptf policies are set based on fw_config. Signed-off-by: V Sowmya <v.sowmya@intel.com> Change-Id: I0ffb9d7cc6c963add001a31ba23a6d6c351dd621 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66589 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Reka Norman <rekanorman@chromium.org>
2022-08-30mb/google/brya/vell: Update amp SSIDShon Wang
The current subsystem ID used by the amps may end up getting used again for future products, therefore this CL updates the subsystem ID to 103C8C08, which was specifically generated for this amp. BUG=b:202484541 BRANCH=brya TEST='FW_NAME=vell emerge-brya coreboot' Change-Id: I399d8d99ead4fb6fdfa24c2a7a3e3d5e63603b8b Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67014 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-08-30mb/google/skyrim/var/winterhold: Update memory and RAMID tableEricKY Cheng
Update memory and RAMID table BRANCH=None BUG=b:243337816 TEST= emerge-coreboot Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com> Change-Id: Iec3c2098be86661249b1786a02f0768f9d8ad0ff Reviewed-on: https://review.coreboot.org/c/coreboot/+/67106 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Amanda Hwang <amanda_hwang@compal.corp-partner.google.com> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
2022-08-30mb/google/rex: Change GPP_A17 programmingTarun Tuli
To match byra commit 7c2514fc072f95eed6483518811fb6c39f780f5b (mb/google/brya: Change GPP_F17 programming), update A17 pad configuration to the APIC only. TEST=Verified booting to OS on Google/Rex. Signed-off-by: Tarun Tuli <taruntuli@google.com> Change-Id: Ie9f071dc4a2755dd1f396e2afe730ead66bb1dd0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67183 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-30mb/google/nissa: Mark CNVi wifi device as untrustedReka Norman
BUG=b:238937091 TEST=Dump the SSDT on nivviks and check that the wifi device has the DmaProperty. Change-Id: I910b7da7050f9aebfe0eb58552c82b1b29de3772 Signed-off-by: Reka Norman <rekanorman@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67044 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2022-08-29drivers/i2c/tpm: Remove TI50_FIRMWARE_VERSION_NOT_SUPPORTEDReka Norman
This workaround was added since reading the firmware version on Ti50 versions < 0.0.15 will cause the Ti50 to become unresponsive. No one is using Ti50 this old anymore, so remove the workaround. BUG=b:224650720,b:236911319 TEST=Boot to OS on nivviks with Ti50 0.22.4. Check the log contains the firmware version: [INFO ] Firmware version: Ti50/D3C1 RO_B:0.0.26/- RW_B:0.22.4/ti50_common:v095c Change-Id: I3628b799e436a80d0512dabd356c4b2566ed600a Signed-off-by: Reka Norman <rekanorman@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67138 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2022-08-27mb/google/corsola: Add new board Magikarpvan_chen
Add a new board 'Magikarp', and enable SDCARD_INIT for it. BUG=b:242822419 BRANCH=None TEST=none Change-Id: Id7432e33b6fd5f1c25536cf068ff76612575e8ee Signed-off-by: van_chen <van_chen@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67043 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Chen-Tsung Hsieh <chentsung@chromium.org>
2022-08-27mb/google/geralt: Fully calibrate DRAMXi Chen
Initialize and calibrate DRAM in romstage. DRAM full calibration logs: dram_init: dram init end (result: 0) DRAM-K: Full calibration passed in 50176 msecs TEST=Full calibration pass. BUG=b:233720142 Signed-off-by: Xi Chen <xixi.chen@mediatek.com> Change-Id: I31f5693ffe4a1e30defbc8a96dc128de03d6b7e7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66278 Reviewed-by: Yidi Lin <yidilin@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-27mb/google/rex: Disable LID_SHUTDOWNSubrata Banik
This patch disables LID based shutdown requests. Google/Rex platform receives a forced shutdown request while booting to depthcharge due to EC wrongly detecting the LID is being closed. For now disable the LID based shutdown behaviour in depthcharge unless the EC issue gets resolved. BUG=b:243920003 TEST=Depthcharge no longer sees the force shutdown request now. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I03e33ea4d04dc48331d1cf98c47786b2a184c258 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67103 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2022-08-26mb/google/nissa/var/pujjo: Add FW_CONFIG probe for new audio devicesLeo Chou
Add FW_CONFIG probe for new audio sku: ALC5682I + MAX98357 BUG=b:243474931 TEST=Boot to OS and verify audio devices are set based on fw_config. Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Change-Id: I16af6cf4644c473034e184e95ff2038ca31b20de Reviewed-on: https://review.coreboot.org/c/coreboot/+/67016 Reviewed-by: Reka Norman <rekanorman@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-26mb/google/nissa/var/craask: Enable Cnvi BT Audio Offload featureTyler Wang
This patch enables Cnvi BT Audio Offload feature and also configures the virtual GPIO for CNVi Bluetooth I2S pads. BUG=b:239670216 TEST=emerge-nissa coreboot Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Change-Id: Ibc7116e8dc5367fd94d29aba36b91778d0c21e4f Reviewed-on: https://review.coreboot.org/c/coreboot/+/66448 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2022-08-26mb/google/brask/variants/moli: Override tdp pl1 valueRaihow Shi
Follow the "619907 Alder Lake-S and Raptor Lake-S Platform" and "685472 Intel® Dynamic Tuning Technology (Intel® DTT)" to override tdp pl1 in 15w cpu MSR to 55w and in 28w cpu MSR to 64w. BUG=b:236294162 TEST=emerge-brask coreboot and check MSR_Package Power Limit-1 in 15w and 28w CPU is correct. Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com> Change-Id: Icb3d7c72b672fbd3e2a9f7ad1f2d1cb2ffc798c6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66910 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-26mb/google/rex: Add mapping for GPIO_PCH_WPTarun Tuli
The define GPIO_PCH_WP needs to be mapped to GPP_H10 based on the Rex schematics 24/6/2022. TEST=Built and booted on Google Rex. Signed-off-by: Tarun Tuli <taruntuli@google.com> Change-Id: I2489c244bd4cbd9e10ed3db981a6e56a954b5e20 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67083 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-26mb/google/rex: Add mapping for EC_SYNC_IRQTarun Tuli
The define EC_SYNC_IRQ needs to be mapped to A17 based on the Rex schematics 24/6/2022. BUG=b:243781237 TEST=Successfully build rex and tested to ensure EC is now functional. Signed-off-by: Tarun Tuli <taruntuli@google.com> Change-Id: Ib61ddc9f73dd7b817d3b990bef8f0169f7cafbcd Reviewed-on: https://review.coreboot.org/c/coreboot/+/67082 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2022-08-25mb/google/brya/variants/crota: fine tune WWAN power sequencingTerry Chen
Because the poweron state of some of the WWAN GPIOs is the asserted state, this patch fixes the poweron sequence so that the WWAN module is always correctly powered on, in both cold and warm reboot scenarios. BUG=b:233564770 TEST=USE="project_crota emerge-brya coreboot" and verify it builds without error. Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com> Change-Id: I4ec8312c30392b9ca0a3e0321cb4578e76ec5787 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64816 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-08-25mb/google/rex: Update DQS for RexTarun Tuli
Update the DQS for Rex as per the latest Rex schematics (08/25). BUG=b:243734885 TEST=Built successfully. Confirmed on HW. Change-Id: I2a458a3da725f953cbba8a194ac6f314f5467419 Signed-off-by: Tarun Tuli <taruntuli@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67041 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maulik Vaghela <maulikvaghela@google.com> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
2022-08-25mb/google/rex: Configure GSC INT GPIO early in the bootKapil Porwal
This patch configures GPP_E03 (GSC_SOC_INT_ODL) as GPI/APIC in early GPIO tables. BUG=b:243641061 TEST=Able to build rex image. Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: I4aa180c7105be3f356a0bbd5b92b4ced628c34fd Reviewed-on: https://review.coreboot.org/c/coreboot/+/67017 Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
2022-08-24mb/google/skyrim: Create morthal variantMoises
Create the morthal variant of the skyrim reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:240970782 BRANCH=None TEST=util/abuild/abuild -p none -t google/skyrim -x -a make sure the build includes GOOGLE_MORTHAL Signed-off-by: Moises <moisesgarcia@google.com> Change-Id: I25c25f067a040e6930f4fc60fadb8be85dc8eda6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66989 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Jon Murphy <jpmurphy@google.com>
2022-08-24mb/google/skyrim: Check if SPD existsIsaac Lee
Update the build script to check if SPD exists, and only if SPD exists the APCB_SBR_D5.gen could be executed. BUG=None TEST=Build Change-Id: Ib7b977a89d403242e8bb1f684269e70082125e88 Signed-off-by: Isaac Lee <isaaclee@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66978 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Jon Murphy <jpmurphy@google.com>
2022-08-24mb/google/brya/var/agah: Reenable ASPM L1 substatesTim Wawrzynczak
Now that the GPU CLKREQ# signal is working correctly, ASPM L1 substates can be enabled and appear functional. BUG=b:240390998 TEST=lspci reports them as functional, MODS does not hang Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I8297f6bbf7f5a1f7d4ac519bc5b7b3112a74a9a0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66811 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-24mb/google/brya/var/agah: Update GPU GPIOsTim Wawrzynczak
Converge as many of the GPU's GPIOs to use PLTRST# as the reset signal explicitly, as the hardware engineers requested this. BUG=none TEST=boot and reboot agah, dGPU still visible on PCIe bus Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I78e58eb17cadc95083571affbecb4e1ce0adf16a Reviewed-on: https://review.coreboot.org/c/coreboot/+/66809 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-24mb/google/brya/var/agah: Enable DPTF oem_variablesTony Huang
Support oem_variables and change based on EC notify event. BUG=b:238921409 TEST=emerge-draco coreboot 1. check ACPI object ODVX has oem_variable[0]=0 Name (ODVX, Package (0x06) { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } 2. check can get EC oem variable change notify in the kernel log Change-Id: Ibd856563a43d73a3b1be09b3fbebca1b36b5eab1 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66575 Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-24mb/google/rex: add arbitrage gpio.c headerKevin Chowski
This comment header is necessary for supporting propagation of overrides to variants. Change-Id: Iee92fa4fbc4851c7032401cff99ea49f87717c7f Signed-off-by: Kevin Chowski <chowski@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66846 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-08-22brya: add new skolas variantNick Vaccaro
Add a new skolas variant, which is a variant of brya's skolas baseboard. BUG=b:242869976 BRANCH=firmware-brya-14505.B TEST=none Change-Id: I7f9f0389d8b1bf75d8652cbcc9d0c15d3a529802 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66843 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-08-21mg/google/corsola: Disable TI50_FIRMWARE_VERSION_NOT_SUPPORTEDYu-Ping Wu
Reading Ti50 version is now supported on Ti50 version 0.22.4. Therefore stop selecting TI50_FIRMWARE_VERSION_NOT_SUPPORTED for corsola. BUG=b:234533588 TEST=emerge-corsola coreboot TEST=cbmem -1 | grep 'Firmware version' BRANCH=none Change-Id: Id8d849eaf99542363c64e27411549eb6dddfd059 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66905 Reviewed-by: Yidi Lin <yidilin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Andrey Pronin <apronin@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2022-08-21mb/google/rex: Reshuffle CHROMEEC_* related configsEran Mitrani
1. Moved CHROMEEC_* to common (required for all boards) 2. added missing EC_GOOGLE_CHROMEEC_SKUID TEST=Verified with simics on RVP Change-Id: I26a01e5d1c78d4cd83b1aa53e68b2c3059da6061 Signed-off-by: Eran Mitrani <mitrani@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66762 Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-21mb/google/brask/variants/moli: Support DPTF oem_variablesRaihow Shi
Enable DPTF oem_variables and override based on CPU match id. BUG=b:236294162 TEST=emerge-brask coreboot and check the value in odvp0 is correct. Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com> Change-Id: Ic935ec42f4de0cbec996da37b44f354978fe4b62 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66907 Reviewed-by: Zhuohao Lee <zhuohao@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-21mb/google/nissa/var/pujjo: Add FW_CONFIG probe for Pujjoteen disableLeo Chou
bypass power Add FW_CONFIG probe to separate ext fivr settings for Pujjoteen and others(Pujjo and Pujjoflex) BUG=b:242663554 TEST=Boot to OS and verify that ext_fivr_settings are set based on fw_config. Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Change-Id: I6bb6d1701c55459cf331dd2f3ffe07f91bca2fa5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66863 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Reka Norman <rekanorman@chromium.org>
2022-08-21mb/google/dedede/var/shotzo: Enable ILITEK touchscreenTony Huang
The current reset delay is not enough to make touchscreen IC ready, ILITEK feedback their requiremt is 400ms in spec T2. After changing the reset_delay_ms and check touchscreen works, ILITE also change the IRO to low level trigger. This CL is to reflect that. BUG=b:235929123 BRANCH=firmware-dedede-13606.B TEST=check touchscreen function work Change-Id: I126b2d74c1d7a1799e2f67a8ab01cba074447c06 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66419 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-19 17:10:50 +0000