summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Expand)Author
2019-01-30mb/google/sarien/variants/arcada: Adjust TP/TS/H1 I2C CLK to meet specCasper Chang
2019-01-30mb/google/octopus/casta: Correct unused GPIO pad configurationSeunghwan Kim
2019-01-30mb/google/hatch: Enable AP Wake from ECShelley Chen
2019-01-29mb/google/octopus/var/phaser: Hook up Raydium touchscreenHao He
2019-01-29google/kukui: Move some initialization from bootblock to verstageYou-Cheng Syu
2019-01-29google/kukui: Implement HW reset functionTristan Shieh
2019-01-29mediatek: Separate WDT reset function from WDT driverTristan Shieh
2019-01-28mb/google/octopus: Fix termination for unused dual voltage pinsShamile Khan
2019-01-28mainboard/google/octopus/variants/casta: Decrease touchpad I2C CLK frequencySeunghwan Kim
2019-01-28mb/google/sarien: Using HID over I2C to enable Melf TouchScreenChris Zhou
2019-01-25mb/google/octopus: Override emmc DLL values for AmptonKane Chen
2019-01-25mb/google/sarien: Force power on after cr50 updateDuncan Laurie
2019-01-25mb/google/sarien: Increse BIOS region size to 28MBLijian Zhao
2019-01-25mb/google/kahlee/variants/aleena: Add support Synaptics touch padLucas Chen
2019-01-25sb/intel/common: Show "Add gigabit ethernet firmware" only for boards that ne...Jan Tatje
2019-01-24mb/google/sarien/variants: Set tcc offset valueSumeet Pawnikar
2019-01-24mb/google/sarien: Fix recovery mode detectionDuncan Laurie
2019-01-24mb/google/octopus/bobba: Add support to handle PEN_EJECT eventKarthikeyan Ramasubramanian
2019-01-24mediatek/mt8183: Move some initialization into mt8183_early_initYou-Cheng Syu
2019-01-24mb/google/hatch: Enable support for WWANMaulik V Vaghela
2019-01-24mb/google/hatch: Enable PCIe WLAN and BTMaulik V Vaghela
2019-01-24cpu/intel/model_206ax: Remove the notion of socketsArthur Heymans
2019-01-23mb/google/sarien: Replace B0D4 with TCPUSumeet Pawnikar
2019-01-23mb/*/*/devicetree.cb: Make sandybridge devicetree uniformArthur Heymans
2019-01-23google/kukui: Revise FMAP layout for larger CBFSHung-Te Lin
2019-01-23mb/google/poppy/variant/nami: disable unused usb2 portsRen Kuo
2019-01-23mb/google/arcada: Add settings for noise mitgationCasper Chang
2019-01-23mediatek/mt8183: Add Micron 4GB LPDDR4X DDR supportHuayang Duan
2019-01-23mb/google/poppy/variants/nami: close the FP power in S5Ren Kuo
2019-01-23mb/google/hatch: Enable SD card support for hatchMaulik V Vaghela
2019-01-23mb/google/octopus: Override emmc DLL values for MeepKane Chen
2019-01-22Revert "UPSTREAM: mainboard/google/kahlee: Also configure GPIO_9 in RAM stage"Daniel Kurtz
2019-01-22mb/google/hatch: Remove MAINBOARD_USES_IFD_EC_REGION selectionSubrata Banik
2019-01-20mb/google/octopus/variants: Disable xHCI compliance mode for FleexAmanda Huang
2019-01-20mb/google/octopus/variants/meep: Disable xHCI compliance modeWisley Chen
2019-01-18mb/google/sarien/variants: Add Thermal Sensors informationSumeet Pawnikar
2019-01-18mb/google/sarien/variants/sarien: Adjust TP/TS/H1 I2C CLK to meet specDtrain Hsu
2019-01-17mb/google/hatch: Configure miscellaneous featuresRonak Kanabar
2019-01-17src/mainboard/google/sarien: query recovery mode from Cr50Keith Short
2019-01-17hatch: Add sbmios_mainboard_sku functionShelley Chen
2019-01-17hatch: disable sw syncShelley Chen
2019-01-16mb/google/sarien/variants/sarien: Set up tcc offset for sarienJohn Su
2019-01-16mainboard/google/kahlee: Also configure GPIO_9 in RAM stageDaniel Kurtz
2019-01-16mb/google/kahlee/careena: Add 20ms delay to captureAkshu Agrawal
2019-01-16mb/google/kahlee/liara: Add 20ms delay to captureAkshu Agrawal
2019-01-16nb/intel/sandybridge: Remove the C native graphic initArthur Heymans
2019-01-16mb/google/sarien: Enable Camarillo DeviceLijian Zhao
2019-01-16mb/google/sarien: Set PL1 and PL2 valuesSumeet Pawnikar
2019-01-16buildsystem: Promote rules.h to default includeKyösti Mälkki
2019-01-16mb/google/sarien: Set Vref Config to 2Lijian Zhao
2019-01-15mb/google/atlas: Enable camera module NVMChen, JasonX Z
2019-01-15mb/*/*: Use libgfxinit on sandy and ivy bridge boardsArthur Heymans
2019-01-14Revert "mb/google/kalista: Disable EC-EFS"Patrick Georgi
2019-01-14console: Change BOOTBLOCK_CONSOLE default to `y`Nico Huber
2019-01-14/src/mb/google/poppy/variants/atlas: Revise SPK resetGaggery Tsai
2019-01-14mb/google/octopus/variants: Configure PLT_RST_L pad IOSSTATE maskedJohn Zhao
2019-01-14mb/google/octopus/variants: Disable xHCI compliance modeJohn Zhao
2019-01-14mb/google/hatch: Use USB2 Port 10 for BT over CnViAamir Bohra
2019-01-13google/butterfly: correct northbridge selectionMatt DeVillier
2019-01-13google/butterfly: add cpu/gpu pwm backlight register valuesMatt DeVillier
2019-01-13mb/google/kukui: add flapjack on top of kukuiYH Lin
2019-01-11soc/mainboard: Update mainboard UART KconfigLijian Zhao
2019-01-10mainboard/google/octopus: configure EC_AP_INT_ODLJett Rink
2019-01-10sb/intel/common: Show "Add EC firmware" only for boards that need itJan Tatje
2019-01-10google/kukui: Correct boardid sources and add sku_idHung-Te Lin
2019-01-10google/kukui: Complete board ID ADC valuesHung-Te Lin
2019-01-10google/kukui: Correct boardid init valuesHung-Te Lin
2019-01-10mb/google/sarien: Add PDR and RW_LEGACY_NVRAM to FMAPDuncan Laurie
2019-01-10mb/google/hatch: enable CPU cluster deviceAamir Bohra
2019-01-09Veyron: fix sdram config for Hynix H9CCNNNBKTMLBR-NTDLoop_Wu
2019-01-09mb/google/hatch: Disable the SA IPU for hatchV Sowmya
2019-01-09google/kukui: Enable VBOOT_VBNV_FLASH to store VBNV in flashTristan Shieh
2019-01-08mb/google/sarien: Set minimum assertion width valuesDuncan Laurie
2019-01-08mb/google/sarien: Enable recovery mode GPIODuncan Laurie
2019-01-08mb/google/sarien: Remove power button ACPI deviceDuncan Laurie
2019-01-07mb/google/hatch: Enable touch panel supportMaulik V Vaghela
2019-01-07mb/google/poppy/variant/rammus: enable USB acpimarxwang
2019-01-07mb/google/sarien: Correct I2C bus clock for touchpadLijian Zhao
2019-01-07mb/google/sarien: Modify ELAN Touchpad i2c bus clkJohn Su
2019-01-06mb/google/slippy: Add a VBT for all variantsArthur Heymans
2019-01-06mb/google/fizz: enable eist (enhanced speedstep)Matt DeVillier
2019-01-06device: Use pcidev_path_on_root()Kyösti Mälkki
2019-01-06device: Use pcidev_on_root()Kyösti Mälkki
2019-01-04mb/*/chromeos.c: Fix PRE_RAM and unify styleKyösti Mälkki
2019-01-04mb/google/jecht: Rename save_chromeos_gpios functionKyösti Mälkki
2019-01-04mb/google/sarien: Add settings for noise mitgationLijian Zhao
2019-01-03mb/google/poppy/variants/nami: Add sku_ids for PantheonFrank Wu
2019-01-03google/kukui: Initialize DRAM from romstageJunzhi Zhao
2019-01-03src/mainboard: Use smm-$(CONFIG_HAVE_SMI_HANDLER)Elyes HAOUAS
2019-01-03mb/google/{auron,jecht}: Remove duplicated HAVE_SMI_HANDLERElyes HAOUAS
2019-01-03mb/google/{glados & variants}: Remove duplicated HAVE_SMI_HANDLERElyes HAOUAS
2019-01-03mb/google/hatch: Make WP_RO range align with winbond specificationSubrata Banik
2019-01-03mb/google/dragonegg: Make WP_RO range align with winbond specificationSubrata Banik
2019-01-02mb/google/octopus/variants: Add 20ms reset delay for WACOM deviceMarco Chen
2019-01-01mb/google/hatch: Enable CNVi Wifi for hatchMaulik V Vaghela
2019-01-01mb/google/hatch: Add NC gpios for display and correct the orderMaulik V Vaghela
2018-12-31mb/google/hatch: Enable NVME support for HatchV Sowmya
2018-12-31mb/google/hatch: Add the USB port configurationV Sowmya
2018-12-31mb/google/hatch: Enable SATA for HatchV Sowmya
2018-12-29mb/google/glados/variants/caroline/devicetree.cb: Remove unneeded white spacesElyes HAOUAS
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 21:20:01 +0000