| Age | Commit message (Collapse) | Author |
|---|
|
BUG=b:348678529
TEST=on Google Fatcat board. Set the proper CBI fw_config bit(s) and
check that the corresponding GPIO PADs are configured as expected
value accordingly.
Change-Id: I914f73ff06bfb801fc319b45b23d7ce4cb7a6d54
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84408
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aamir Bohra <aamirbohra@google.com>
Reviewed-by: Pranava Y N <pranavayn@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch updates the flash map layout to guarantee that the
RW_SECTION_B section starts at a 16MB boundary.
TEST=Successfully builds google/fatcat.
Change-Id: I74ea21a8a4107d438bc03a0da182ea7e991e74bc
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84821
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Pranava Y N <pranavayn@google.com>
|
|
Nova doesn't support thunderbolt, so disable the TBT setting.
Enabling TBT also causes the system to fail to enter S3/S5 state.
S5 fail log:
24-10-21 20:23:34.610 Port 80 writes:
24-10-21 20:23:34.610 9a02 9a32 9a14 9c15 9c18 9c19 9c20 9c22 9c25 9c28 9c3f 9c43 9c44 9c4f 9c23 9a50 9a5f 9a33 9b40 9b41
24-10-21 20:23:34.620 9b42 9b47 9c80 9c81 9c82 9c83 9a61 9a63 9a03 9a04 9a05 9a06 9a07 9a0f 9a65 9a64 9c6a 9c71 9c7f 99
24-10-21 20:23:34.626 a0 a1 72 24 25 24 25 55 24 25 55 55 73 74 75 75 75 75 75 75
24-10-21 20:23:34.633 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75
24-10-21 20:23:34.639 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75
24-10-21 20:23:34.643 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 76 77 79 9c
24-10-21 20:23:34.649 93 7a fe 7b f8 aa ab 96 <--new
powerinfo
24-10-21 20:23:59.424 powerinfo
24-10-21 20:23:59.424 power state 4 = S0, in 0x00ff
The correct power state for S5 is G3, not S0.
BUG=b:374213121
TEST=emerge-constitution coreboot chromeos-bootimage. Booting to OS and verify S3/S5 by EC log.
Change-Id: I2bae8ae396f001dbef3322e361f9563792e1a1ef
Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84838
Reviewed-by: Pranava Y N <pranavayn@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
1. 2nd touch panel: INX N140HCN-EA1 C5
2. Set TOUCHSCREEN_ELAN9004 to value "3"
BUG=b:374899470
BRANCH=firmware-nissa-15217.B
TEST=1. emerge-nissa coreboot chromeos-bootimage
2. Confirm command evtest and touchscreen function is workable.
Change-Id: Ic25bd46c7cb7948e920de4fd44edb87f20cf01c4
Signed-off-by: Daniel Peng <Daniel_Peng@pegatron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84834
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jayvik Desai <jayvik@google.com>
|
|
Add the new memory support:
Samsung K3LKBKB0BM-MGCP
BUG=b:374880584
BRANCH=firmware-nissa-15217.B
TEST=Run command "go run ./util/spd_tools/src/part_id_gen/\
part_id_gen.go ADL lp5 \
src/mainboard/google/brya/variants/glassway/memory/ \
src/mainboard/google/brya/variants/glassway/memory/\
mem_parts_used.txt"
Change-Id: I47d9fd64fa841a2cf60930c5e319a9130019b0a5
Signed-off-by: Daniel Peng <Daniel_Peng@pegatron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84831
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jayvik Desai <jayvik@google.com>
|
|
This disables C1 state auto-demotion to run the coreboot with
Panther Lake ES SoC without an issue.
This configuration will be remove later once the related features
are fully verified.
BUG=b:373915085
TEST=Build fatcat and check the platform boots without an issue.
Change-Id: I384dba2918cfd04deb90284513c204fa8c21094b
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84767
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Jayvik Desai <jayvik@google.com>
|
|
There is no ACPI power resource for LTE module Rolling RW101R-GL,
therefore implement the power sequence of power-on, power-off, and
reset timing from GPIO init, bootstate init callbacks, and smihandler
function.
BUG=b:368450447
BRANCH=None
TEST= Build firmware and verify on jubilant with LTE:RW101R-GL.
Measure the power on, power off, and reset timing.
Run warm boot, cold boot and suspend/resume to make sure
WWAN devcie is workable.
Change-Id: I4a205e3db777c7c225d31b6cc802883fd7167089
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84689
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Update jubilant CPU PL4 from 9 watt to 14 watt for critical battery
boot. The maximum peak power is set at 14 watt which is 45W multiplied
by 32% efficiency.
Overriding power limits for AC power without battery:
PL1 (15000, 18000)
PL2 (41000, 41000)
PL4 (14)
BUG=b:364441688
BRANCH=None
TEST=Able to successfully boot on jubilant SKU1 and SKU2 with AC only.
Test on AC 65W and 45W w/o battery, and check PL4 values from log.
Change-Id: Id1e58797206a61d241f48b057b304e05c9c323d9
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84784
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sowmya Aralguppe <sowmya.aralguppe@intel.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add wifi PCIe hosts M.2 E-key WLAN to fulfill
drawman_jsl_schematic_20200528.
BUG=None
BRANCH=firmware-dedede-13606.B
TEST=emerge-dedede coreboot chromeos-bootimage
Change-Id: If414ff1941d2d70c5f0444ac58b228ed5c95303a
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84612
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
Add a new Rauru follower 'Navi'.
BUG=b:341210522
TEST=emerge-cherry coreboot
Change-Id: Ia2a6c1c09b3cedc0ef7f51ec93fdabf2c07c8885
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84694
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
NAU8318 supports beep function via GPIO control. Configure the
GPIO pins and pass them to the payload.
BUG=b:343143718
TEST=Verify beep function through CLI in depthcharge successfully.
We can test with:
firmware-shell: badusbbeep
firmware-shell: devbeep
Change-Id: I79277bc1947dab517dea5aba583c5b4e0ac81bc4
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84693
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There is no powering-on control in the fingerprint kernel driver. The
fingerprint team of ChromeOS suggests powering-on FP MCU in the FW.
Follow trogdor to pull down FP_RST_1V8_S3_L, AP_FP_FW_UP_STRAP,
EN_PWR_FP and pull up EN_PWR_FP in ramstage for power rail to be stable.
BUG=b:340401582
TEST=measure waveform and the fingerprint works on ChromeOS
Change-Id: I05600d90fdf922faeb778a36d8a08f68c1bb4125
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84692
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Configure GPIO EINT28 (XHCI_INIT_DONE) as output, so that payloads
(for example depthcharge) can assert it to notify EC to enable USB VBUS.
BUG=b:317009620
TEST=emerge-rauru coreboot
Change-Id: I5950974435b56997626886b16d371cd8e6472e3c
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84691
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
FW_CONFIG ids
Based on Gallida360 design, we add two new options for WIFI_SAR_ID:
- WIFI_SAR_ID_INTEL_CONVERTIBLE 2
- WIFI_SAR_ID_INTEL_CLAMSHELL 3
BUG=b:372354703
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot chromeos-bootimage
Change-Id: I1b58c4f572d4dbcb269d38485664ddc51e378e5e
Signed-off-by: Daniel Peng <Daniel_Peng@pegatron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84779
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jayvik Desai <jayvik@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Create the francka variant of the fatcat reference board.
BUG=b:370666276
TEST=util/abuild/abuild -p none -t google/fatcat -x -a
make sure the build includes GOOGLE_FRANCKA
Change-Id: I372f445f7007d0d33020545a8febbce27c260e41
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84769
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Amanda Hwang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-by: Pranava Y N <pranavayn@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add the GPIO pad configuration to be performed before memory is set up
along with the relevant devices definition.
This patch includes:
- FW config for pre-mem GPIO PAD configuration
- Add overridetree changes used by pre-mem FW config
BUG=b:348678529
TEST=Boot on Google Fatcat board. Note this cannot be tested by itself
directly. Test with CL:84408, set the proper CBI fw_config bit(s) and
check that the corresponding GPIO PADs are configured as expected value
accordingly.
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: Iac1f637c21a9818512b224dc4cbe4a75dbc516ce
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84718
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Pranava Y N <pranavayn@google.com>
|
|
Create the telith variant of the nissa reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0)
BUG=372506691
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_TELITH
Change-Id: I4971b9691d3dd293ca640795967c36472afef9c9
Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84759
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
1. Add STYLUS fw_config setting.
2. Enable stylus device settings.
3. Disable the stylus GPIO pins based on fw_config.
BUG=b:364798563
BRANCH=firmware-nissa-15217.B
TEST=1. emerge-nissa coreboot
2. Confirm command evtest for stylus PRP0001:00 and workable.
Change-Id: Ifa8555eed1c31e9342a50a735fc618106f26d41a
Signed-off-by: Daniel Peng <Daniel_Peng@pegatron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84713
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Daniel Peng <daniel_peng@pegatron.corp-partner.google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
In order to fit the specification, change gpio setting for touch panel
and wwan.
Change items:
1. wwan : Add WWAN_RST_L to 0. And we want WWAN_EN to pull high more
early than WWAN_RST_L, so add WWAN_EN to 1 in romstage stage.
2. touch panel : First we add EN_PP3300_TCHSCR and USI_RST_L to 0 to
init status. And we want EN_PP3300_TCHSCR to pull high more early than
USI_RST_L so delete USI_RST_L pull high in romstage.
BUG=b:357764679
Test=emerge-nissa coreboot
Change-Id: I0a07ea8e2bf3d165dcebd89c4c564f157d9d4846
Signed-off-by: Roger Wang <roger2.wang@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84668
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Reduce gspi speed from 10 MHz to 9 MHz, because Raptor
Lake Refresh platform GSPI supports max frequency 9 MHz.
BUG=b:342932183
TEST=emerge-brox coreboot
Change-Id: If5b7885d95cfe21ec71cc37e6d72419935b0844f
Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84708
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Setting devices to unprovisioned allows us to perform
functional testing without having to rewrite the fw config
during the SMT phase of factory production.
BUG=None
TEST=Build lotso firmware and boot to OS when fw_config is
unprovisioned and ensure all devices are enable.
Change-Id: I3b8285ce335ee0f3595d184eb0921f697bdbd0c2
Signed-off-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84714
Reviewed-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
1.Add WFC fw_config setting.
2.Used USB2 Port7 for WFC.
BUG=b:365184481
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
Change-Id: Ie5dcf5ed8f72a4bdf4c2c7fc63bf94dc7b869eef
Signed-off-by: Daniel_Peng <Daniel_Peng@pegatron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84685
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This change updates the EC event parameters for Ovis, a Chromebox.
As a result, several existing parameters like LID, battery, and AC
connect/disconnect are no longer applicable to the Chromebox design.
TEST=Successfully built and booted google/ovis.
Change-Id: I2b9a6970a07624e16b4483907b8d2b77c04d535c
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84671
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Commit 8cfe1b3302ff (mb/google/brox/jubilant: Modify FP IRQ pin to GPP_D13): CB:84124, changes the fingerprint IRQ pin from GPP_F15 to GPP_D13, but forgot to update the pin in the array fp_disable_pads.
Hence update fp_disable_pads configuration to include that GPIO.
BUG=None
TEST= build firmware
$ emerge-brox coreboot
Change-Id: Iee4c3d3f000f884ca8a77ae8c72ccbeebfeb865f
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84545
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
|
|
As per commit 865173153760 ("sconfig: Move config_of_soc from device.h
to static.h"), sources that require access to the devicetree should
directly include static.h so that it can be removed from device.h,
eliminating unnecessary dependencies on static.h for files that only
need the types and function declarations in device.h.
Change-Id: Ia793666fda47678764fd33891fddb4aecf207bd4
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84588
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Jayvik Desai <jayvik@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This patch adds "fatcatnuvo" and "fatcatite" boards to the fatcat
Kconfig.
BUG=b:369728249
TEST=Able to build fatcat/fatcatnuvo/fatcatite and verify the correct
configs selected in coreboot.config
Change-Id: Ice3f1d711426cb356c399de6390fef6f0e6bc748
Signed-off-by: Pranava Y N <pranavayn@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84648
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
1.Add AUDIO fw_config setting.
2.Add audio codec ALC5650 related settings for Gallida360 project.
BUG=b:364798053
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
Change-Id: I3761ca6d4cad18c74f5e1a056f0cb465dc4ac3ea
Signed-off-by: Daniel_Peng <Daniel_Peng@pegatron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84655
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The new names include the `AUDIO_` prefix to clearly indicate that
they are audio-related options.
TEST=Able to build google/fatcat w/o any functional impact.
Change-Id: Ia651c19f02423ee214a31168e2bd809e097ce8c2
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84657
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Pranava Y N <pranavayn@google.com>
|
|
use TOUCHSCREEN_THC_I2C instead of TOUCHSCREEN_THC0_I2C
BUG=b:348678529
TEST=Able to build google/fatcat
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: I689dd72a925c76ca6c2c9a941f4857daae20c943
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84652
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: YH Lin <yueherngl@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Pranava Y N <pranavayn@google.com>
|
|
BUG=b:348678529
TEST=Boot google fatcat board till FSP memory training
Change-Id: I914f73ff06bfb801fc319b45b23d7ce4cb7a6d52
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84405
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
BUG=b:348678529
TEST=Able to build google/fatcat.
Change-Id: I4061b9b4c1e515e8c078c67f30f29eee87b84a66
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84645
Reviewed-by: YH Lin <yueherngl@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Pranava Y N <pranavayn@google.com>
|
|
Add FP enable/disable based on SKU ID for Dratini. This is meant
to resolve a UMA issue with Dratini devices that had the FPMCU
populated on non-fp devices. Since the FPMCU is present, and the
firmware enables the power GPIO's based on variant, not SKU, the
devices were reporting data on fingerprint errantly.
BUG=b:354769653
BUG=b:200825114
TEST=Flash to Dratini, test FP.
Disable test SKU, flash on Dratini, test FP.
To test, run `ectool --name=cros_fp version` in the shell
When enabled, the fpmcu fw version should be displayed.
When disabled, an error should be displayed because the fpmcu
is inaccessible.
Change-Id: Ifc450f51b00b9c3b62268ce94884f5749a3e18c0
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83745
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
- This patch update the original google/fatcat support added
with Meteor Lake support as a workaround.
- Add initial support to build google/fatcat for Panther Lake SOC
- Add soc acpi file entry in mainboard dsdt.asl
BUG=b:348678529
TEST=Build google fatcat board
Change-Id: I914f73ff06bfb801fc319b45b23d7ce4cb7a6d5e
Signed-off-by: Saurabh Mishra <mishra.saurabh@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83419
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The LTE module RW101R-GL provide a hardware pin to enable/disable
WWAN RF function.The function is disabled in default and is
controlled by the AT command.Therefore,set the WWAN_RF_DISABLE
Pin to NC, and it has been pull-high by hardware desgin.
BUG=b:368450447
BRANCH=None
TEST= Build firmware and verify the WWAN on/off function in OS.
Change-Id: I47a28342f67f99c5787077c48a01ddbaa77b5967
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84611
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
|
|
Add wifi sar for bujia.
BUG=b:345364452
BRANCH=firmware-brya-14505.B
TEST=emerge-brask coreboot-private-files-baseboard-brya coreboot
chromeos-bootimage
Change-Id: I5a67f3723a9dc33793a5cd95f9a3a2596c3c1fc6
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84501
Reviewed-by: Jayvik Desai <jayvik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
GCC with LTO cought this.
Warning:
src/mainboard/google/kahlee/variants/careena/variant.c:44:12: error: 'bid' may be used uninitialized [-Werror=maybe-uninitialized]
44 | if (bid == 7)
| ^
src/mainboard/google/kahlee/variants/careena/variant.c: In function 'car_stage_entry':
src/mainboard/google/kahlee/variants/careena/variant.c:24:18: note: 'bid' was declared here
24 | uint32_t bid;
Change-Id: Ie732b5be5cd9dc0abaf1a5efe023bcb0738dba1d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84206
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: coreboot org <coreboot.org@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add two new memory parts
1. K3KL8L80CM-MGCT (Samsung)
2. H58G56BK8BX068 (Hynix)
BUG=None
TEST=Run part_id_gen tool and check the generated files.
Change-Id: I557b359d9e639f6c3fac4239eb28aa7e0bed4c0e
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84529
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This corrects the mismatch found in the verb tables of Monroe Chromebase
and Link Chromebook.
The verb data was not aligned to a multiple of 4, therefore an entry was
repeated as padding.
This was found due to the `_Static_assert()` from CB:84360 failing.
TEST=Tested on LINK under Linux and Win11, audio working properly under both.
Change-Id: Id377281af310642a6ba77e5a0002ca1dfca38827
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84414
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Poweroff does not seem to use the ACPI _OFF function, but rather the
smihandler. Creating variant_smi_sleep function for nami to handle
the power off sequence during reboot/poweroff.
BUG=b:364193909
TEST=emerge-brox coreboot
Change-Id: I0108be4e5e7c0265aae0f16fd4e2b7cbe5936112
Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84412
Reviewed-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update DTT settings according to b:348285763#comment20 in
order to increase the limit of the charging current to 3A.
BUG=b:348285763
TEST=emerge-brox coreboot, and thermal engineer verifies OK.
Change-Id: I24978afd819666f635c85f2be9b71d39e0a39f27
Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84527
Reviewed-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Modify start-up timing for WWAN RW101R-GL to follow spec:
PWR_EN H H H
FCPO# Tpr H H
RESET# L Ton H
Tpr: delay for Power stable (>0ms)
Ton: delay for reset time (>20ms)
BUG=b:349698817
BRANCH=None
TEST= Build firmware and verify on jubilant with RW101R-GL
Measure the start-up timing sequence to meet spec
Boot up in OS, and confirm WWAN can connect to cell site
Change-Id: I7aa3e7a172143ff1cebea7f48bda45d4fb2c77f7
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84413
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Add wifi sar table support for fatcat. Bit 4-5 in CBI/FW_CONFIG
is used to select different sar table (index 0 to 3).
BUG=b:348678529
TEST=emerge-fatcat coreboot chromeos-bootimage
Change-Id: I2d82f76d7c11378ee5c221a6b9621b4cba83720d
Signed-off-by: YH Lin <yueherngl@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84556
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Pranava Y N <pranavayn@google.com>
|
|
Trulo ISH uses the MAIN FW loaded by the kernel driver. This commit
enables DRIVER_INTEL_ISH_HAS_MAIN_FW for trulo, which skips printing the
ISH BUP version.
BUG=b:360144613
TEST=Local build successful and tested on trulo by toggling the
config. enabling this config skips printing the ISH version in cbmem.
1. CONFIG enabled
```
trulo-rev1 ~ # cbmem -c | grep ISH
[INFO ] \_SB.PCI0.ISHB: Set firmware-name: ish_fw.bin
```
2. CONFIG disabled
```
trulo-rev1 ~ # cbmem -c | grep ISH
[DEBUG] ISH version: 5.4.2.36864
[INFO ] \_SB.PCI0.ISHB: Set firmware-name: ish_fw.bin
```
Change-Id: Ifebd563ec8ddb0378e1215a90396687857f3f71d
Signed-off-by: Jayvik Desai <jayvik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84494
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
BUG=b:348678529
TEST=Able to build google/fatcat.
Change-Id: I5c90aac4873dcc57e65e641656dca3a96f84d6b8
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84543
Reviewed-by: Pranava Y N <pranavayn@google.com>
Reviewed-by: YH Lin <yueherngl@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add default value in nissa and trulo devicetree.cb, ODM have to review
the board design to follow RDC#646929 Power Map requirement.
NOTE: The VccInAuxImonIccImax remains unchanged w/ and w/o this CL.
BUG=b:330117043
BRANCH=firmware-nissa-15217.B
TEST='emerge-nissa coreboot chromeos-bootimage'
Change-Id: Iaedd34757aa6802edcae402e751bc39b9cfe9e0c
Signed-off-by: Simon Yang <simon1.yang@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83725
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For next DVT build, hw adds this power ctrl.
BUG=b:359409425
TEST=emerge-brox sys-boot/coreboot sys-boot/chromeos-bootimage
Change-Id: Id256b3a94d3c8ed6f6832d63ecc74c2438c7d15a
Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84254
Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When battery not present, increase PL4 limit from 9 to 40.
Get PL setting from internal thermal and power team.
AC+DC/DC:
PL1=15W
PL2=25W
PL4=114W
AC ONLY:
PL1=15W
PL2=25W
PL4=40W
BUG=b:355094551
TEST=emerge-brox sys-boot/coreboot sys-boot/chromeos-bootimage
Confirm on lotso EVT board, as expected.
Change-Id: I5848c776399a1bdc455db604bb3b22d16f6b2928
Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84202
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:342929824
BRANCH=None
TEST=boot to kernel success
Change-Id: Ibc13137488948ec6cea1904b3964ffed4ff7ea7d
Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84499
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We use ALC256 as HDA codec on fatcat hence, added the verb table.
BUG=b:348678529
TEST=Tested audio playback using HDA ALC256 codec on PTL reference
board
Change-Id: I914f73ff06bfb801fc319b45b23d7ce4cb7a6d55
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84409
Reviewed-by: Pranava Y N <pranavayn@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:348678529
TEST=Memory training is successful on google fatcat board
Change-Id: I914f73ff06bfb801fc319b45b23d7ce4cb7a6d51
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84406
Reviewed-by: Pranava Y N <pranavayn@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This commit updates the fatcat mainboard to use the Panther Lake SoC
instead of Meteor Lake.
The changes include:
- Selecting the `SOC_INTEL_PANTHERLAKE_U_H` config option.
- Updating the `mainboard_update_soc_chip_config()` function to use the
`soc_intel_pantherlake_config` struct.
- Updating the devicetree to use the `soc/intel/pantherlake` chip.
- Updating variant header files to reflect the SoC change.
This update enables support for the Panther Lake SoC and its
features on the fatcat mainboard.
BUG=b:347669091
TEST=Able to build google/fatcat.
Change-Id: Ie0c6257dfb9dd1f627472ad220614f9b24c911ef
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84537
Reviewed-by: Pranava Y N <pranavayn@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This commit removes the virtual GPIOs for recovery and write protection
from the fatcat variant.
These GPIOs are not utilized on the fatcat platform, and their removal
simplifies the GPIO configuration and improves code readability.
The `CROS_GPIO_DEVICE_NAME` macro is no longer applicable for Panther
Lake SoCs. Future changes will introduce a suitable GPIO device name
that meets the requirements of Panther Lake.
BUG=b:347669091
TEST=Able to build google/fatcat.
Change-Id: I492fec28637edb2f84e9290b28dabce3f23aa867
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84536
Reviewed-by: Pranava Y N <pranavayn@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable the SOC_INTEL_COMMON_BASECODE_RAMTOP Kconfig option for the
google/vell mainboard. This option ensures improving the boot time
on google/vell by 40ms in an average.
BUG=b:352330495
TEST=Able to reduced google/vell boot time by 40ms.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Iedfd346c62b1ac79796042dd3569d846007b8f10
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84525
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Deku S0ix is blocked by the SSD. Enable RTD3 for the SSD to unblock
S0ix. RTD3 for SSDs has already been enabled on Rex and Screebo, too.
To prevent this S0ix blocking issue, RTD3 should also be enabled for
Karis.
BUG=361011799
TEST=Run suspend_stress_test and check whether DUT can enter S0iX.
suspend_stress_test w/o this CL
(with Phison PCIE Gen4 SSD PSENN256GA87FC0)
Suspend failed, s0ix count did not increment from 19182060
Substate Residency
S0i2.0 0
S0i2.1 0
S0i2.2 0
And PC10 residency is only 60% (by SoCWatch)
suspend_stress_test w/ this CL
(with Phison PCIE Gen4 SSD PSENN256GA87FC0)
Substate Residency
S0i2.0 0
S0i2.1 19186
S0i2.2 3389654
And PC10 residency is ~90% (by SoCWatch)
Change-Id: Iaded43a84ad1e245106d36a9d4aa83c40b046649
Signed-off-by: Curtis Chen <curtis.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84452
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Select SOC_INTEL_RAPTORLAKE to force coreboot to use the RPL FSP headers
for FSP as vell is using a converged firmware image.
This effort also helps to save vell boot time by 80-100ms as RPL FSP is
better optimized.
Additionally, Raptor Lake platform only needs 1 SIPI-SIPI which saves
10ms of the boot time.
BUG=b:352330495
TEST=Able to build and boot google/vell.
warm reboot time w/o this CL
```
Total Time: 1,408,669
```
warm reboot time w/ this CL
```
Total Time: 1,235,651
```
Change-Id: I8f7dd76f00cfeff2908aeb805524706ac23403fa
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84491
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch disables unused I2C6 controller for the 'vell' variant of
the 'brya' mainboard.
BUG=b:352330495
TEST=Able to build and boot google/vell.
Change-Id: I5b39e44bb64bf2285c962249c0d94a8d5325f0c7
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84490
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Create the kanix variant of the rex0 reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:368501705
TEST=util/abuild/abuild -p none -t google/rex -x -a
make sure the build includes GOOGLE_KANIX
Change-Id: Id74a084ed3cebb65625166e3098f43e41a63f5f9
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84432
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Earlier change (https://review.coreboot.org/c/coreboot/+/84019)
pushed to resolve the privacy LED blinking issue regressed the camera
autofocus functionality. This change updates the power resource for
NVM and VCM in line with the tivviks schematics to fix the issue.
BUG=b:365899407
TEST=Build and boot tivviks. Verified the Autofocus and all the
camera basic sanity tests.
Change-Id: Id3e256d59982ac176844e289f18ee450079704b9
Signed-off-by: Sowmya V <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84420
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
|
|
Compared to MT8186, MT8186T requires initializing the PMIC MT6319 in the DTS file, which necessitates using different SKU ID to distinguish between the MT8186 and MT8186T.
For MT8186, factory pre-flashed 0x7fffffff as unprovisioned SKU ID and
kernel can use the corresponding DTS file. To make MT8186T functional
on unprovisioned devices, change the SKU ID to 0x7ffffeff, so that the
correct DTS file will be selected by the payload.
BUG=b:365730137
TEST=1. Pre-flashed 0x7fffffff and boot OS.
2. Check OS boot normally by 0x7ffffeff.
BRANCH=corsola
Change-Id: I91306d3abd508e104851916882fb36a4fd302036
Signed-off-by: Yang Wu <wuyang5@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84342
Reviewed-by: Knox Chiou <knoxchiou@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
This patch updates the fatcat flash map layout to accommodate the growth
in Panther Lake IFWI blobs over Meteor Lake.
Release FMD:
SI_ALL: 8MB -> 9MB
SI_BIOS: 24MB -> 23MB
RW_UNUSED: 4MB -> 3MB
Debug FMD:
SI_ALL: 8MB -> 9MB
SI_BIOS: 24MB -> 23MB
RW_UNUSED: 3MB -> 2MB
TEST=Able to build google/fatcat inside chroot.
Change-Id: I8febb4df5d3b3eb07ebff8e56a1ce2dfd2f52e7d
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84453
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Pranava Y N <pranavayn@google.com>
|
|
Due to beadrix DB has C1 port before, and add FW_CONFIG without C1 port for LTE sku.
BUG=b:364431483
BRANCH=firmware-dedede-13606.B
TEST=emerge-dedede coreboot chromeos-bootimage
Set fw config to DB_PORTS_LTE and check
1.fw_config match found: DB_PORTS=DB_PORTS_LTE <= show LTE present message
2.USB3 port 3: enabled 1 <= LTE port enable
Change-Id: Ica5a2d6e19421b132a0bdbad77806a17e2c1ce69
Signed-off-by: Kevin Yang <kevin.yang@ecs.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84232
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
psys is not an optimal solution for no/low battery boot. Hence remove
function and macros related to psys implementation.
BUG=b:335046538
BRANCH=None
TEST=Build and boot on brox board
Change-Id: I6c0e9561367b5846b00be27012f002dd7c299414
Signed-off-by: Sowmya Aralguppe <sowmya.aralguppe@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84397
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
According to the CL:chrome-internal:7651905,
Riven will use the fw_config to separate SAR setting.
CNVI + ID_0 --> wifi_sar_0.hex for WIFI6
PCIE + ID_1 --> wifi_sar_9.hex for WIFI7
BUG=b:366060274
TEST=build, enabled iwlwifi debug, and check dmesg as below.
iwl_sar_fill_table Chain[0]:
iwl_sar_fill_table Band[0] = 132 * .125dBm
iwl_sar_fill_table Band[1] = 136 * .125dBm
iwl_sar_fill_table Band[2] = 136 * .125dBm
iwl_sar_fill_table Band[3] = 136 * .125dBm
iwl_sar_fill_table Band[4] = 136 * .125dBm
iwl_sar_fill_table Band[5] = 144 * .125dBm
iwl_sar_fill_table Band[6] = 144 * .125dBm
iwl_sar_fill_table Band[7] = 144 * .125dBm
iwl_sar_fill_table Band[8] = 144 * .125dBm
iwl_sar_fill_table Band[9] = 144 * .125dBm
iwl_sar_fill_table Band[10] = 144 * .125dBm
iwl_sar_fill_table Chain[1]:
iwl_sar_fill_table Band[0] = 132 * .125dBm
iwl_sar_fill_table Band[1] = 136 * .125dBm
iwl_sar_fill_table Band[2] = 136 * .125dBm
iwl_sar_fill_table Band[3] = 136 * .125dBm
iwl_sar_fill_table Band[4] = 136 * .125dBm
iwl_sar_fill_table Band[5] = 144 * .125dBm
iwl_sar_fill_table Band[6] = 144 * .125dBm
iwl_sar_fill_table Band[7] = 144 * .125dBm
iwl_sar_fill_table Band[8] = 144 * .125dBm
iwl_sar_fill_table Band[9] = 144 * .125dBm
iwl_sar_fill_table Band[10] = 144 * .125dBm
Cq-Depend: chrome-internal:7651905
Change-Id: I647d64a008991a7a20791b2c87ea6308af6bb82e
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84339
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The ordering of the USB-C port locations is swapped. When facing the
left panel, the correct ordering is port 1 (left) then port 0 (right).
Swap the positions of the two USB-C ports to their correct values.
BUG=b:349822718
TEST=Booted to OS, confirmed correct physical_location at
/sys/class/typec.
Change-Id: I98e3042c64aba885b602c99916734c2dbb9d66bd
Signed-off-by: Jameson Thies <jthies@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84403
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This commit drops redundant CRASHLOG option for the brox and brya
mainboards as SOC_INTEL_CRASHLOG config is now selected by the
Alder Lake SoC directly.
TEST=Able to build and boot google/brox w/o any functional impact of
the crashlog feature.
Change-Id: I83859d6e61a151d6930785df3466c185c69e8e66
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84366
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch configures the GPIO pins for ISH to notify EC about the
tablet mode change in accordance with schematic_20240607.
BUG=b:347811875
TEST=Build and boot google/trulo. Placed the device in tabletmode & on
EC console,"tabletmode" command shows "tablet mode".
Change-Id: Id22e397e46b522428ffdabe34a445ed7e4fb6fc5
Signed-off-by: Varun Upadhyay <varun.upadhyay@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84351
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This patch removes the redundant crashlog config (SOC_INTEL_CRASHLOG)
entry from BOARD_GOOGLE_BRYA0 and BOARD_GOOGLE_BRASK.
BOARD_GOOGLE_BRYA_COMMON already selects a crashlog config, and
brya0/brask board eventually selects the BOARD_GOOGLE_BRYA_COMMON
config, making SOC_INTEL_CRASHLOG redundant.
TEST=Successfully built and booted google/brya0.
Change-Id: Iaff7954d4dafb4c6ca72a1521dfb434fb36b495a
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84364
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch removes the redundant crashlog config (SOC_INTEL_CRASHLOG)
entry from BOARD_GOOGLE_BASEBOARD_BROX. BOARD_GOOGLE_BROX_COMMON
already selects a crashlog config, and brox baseboard eventually selects
the BOARD_GOOGLE_BROX_COMMON config, making SOC_INTEL_CRASHLOG
redundant.
TEST=Successfully built and booted google/brox.
Change-Id: Idcb03d13ee3943f188246663d47f47cb8afccbd9
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84363
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Commit bc8f5405b542 ("tgl mainboards: Move usb{2,3}_ports settings into
XHCI device scope") not only moved the USB port definitions under the
XHCI device reference, but also combined multiple register definitions.
In doing so, it broke the inheritance from the baseboard, since the
variant overridetree registers now replaced the entire usb2_ports/
usb3_ports structs, rather than replacing individual array elements
therein. This resulted in any USB ports inherited from the baseboard
and not overridden by the variant being non-functional as they were
not included in the resulting combined devicetree.
To fix this, return to overriding individual array elements in the
usb2/3_ports structs.
TEST=build/boot google/drobit. Verify all USB ports present and
functional. Verify mainboard/static.c in built shows all ports.
Change-Id: I54921fa4ecf594a1ecbcfa7c45e5d745d4a95652
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84348
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
1)Modify jubilant cpu power limit setting depend on the brox
baseboad settgins,refer to CL:
https://review.coreboot.org/c/coreboot/+/83752
2)Update PL1,PL2, and PL4 value from jubilant thermal design
PL1 = 15W
PL2 = 41W
PL4 = 87W
BUG=b:364441688
BRANCH=None
TEST=Able to successfully boot on jubilant photo SKU1 and SKU2
boards with AC w/o battery.
Test on AC 65W and 45W w/o battery,and check the PL values.
Change-Id: I9a143d9faaa6c57b0d314c0ff6c0e55f556d7216
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84219
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
|
|
When battery is disconnected and only adaptor is connected higher PL2
power draw causes cpu brown out and system does not boot to kernel. To
avoid this set Boot frequency UPD to 1. Reduce PL4 value to overcome
power spikes from SoC during boot. Remove Psys implementation as it
impacts active state platform performance.
BUG=b:335046538,b:329722827
BRANCH=None
TEST=Able to successfully boot on 3 different Brox proto2 SKU1
and SKU2 boards with 65W, 45W and 30W adaptors for 3
iterations of cold boot.
Change-Id: I58e136c607ea9290ecac0cee453d6632760a6433
Signed-off-by: Sowmya Aralguppe <sowmya.aralguppe@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83752
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
It return 0 when google_chromeec_command() on success, so
get_input_power_voltage() should return adaptor voltage instead of
psys_config default value.
BUG=b:329037849
BRANCH=firmware-brya-14505.B
TEST= cbmem -c | grep -i PsysPmax
Change-Id: I848c92752b7a7b53f47c6296aad0bdda20e9b0bd
Signed-off-by: Shon <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84333
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To publish the Bluetooth Regulator Domain Settings under the right
ACPI device scope, the wifi generic driver requires the bluetooth
companion to be set accordingly.
BUG=b:362672785
TEST=Build Brox firmware and boot to OS. Ensure that the BRDS table is
populated under the right ACPI device scope.
Scope (\_SB.PCI0.XHCI.RHUB.HS10)
{
Name (BRDS, Package (0x02)
{
0x00000001,
Package (0x0A)
{
0x00000012,
0x00000001,
0x00000001,
0x7C,
0x70,
0x70,
0x70,
0x70,
0x70,
0x70
}
})
}
Change-Id: I9a74a995bca8d412b85c243c7f2f98c9917b5e76
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84296
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bob Moragues <moragues@google.com>
|
|
Check that lnkCap supports ASPM L1, so set it to ASPM_L1
to avoid excessive power consumption.
BUG=b:363854853
TEST=emerge-brox sys-boot/coreboot sys-boot/chromeos-bootimage
Change-Id: I386f8e88a5af661b1f4c04d2e2a34cd181608bd8
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84278
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: <srinivas.kulkarni@intel.com>
|
|
Clean up redundant `struct pad_func` and `PAD_*` definitions. This patch
also refactors the PAD_* macros by,
- Repurposing PAD_FUNC and dropping PAD_FUNC_SEL.
- Adding PAD_FUNC_DOWN and PAD_FUNC_UP to avoid the implicit
initialization.
BUG=none
TEST=emerge-{elm, kukui, asurada, cherry, corsola, geralt, rauru} coreboot
Change-Id: I12b8f6749015bff52988208a7c3aa01e952612c6
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84222
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove PL4 value modification based on PsysPL3 value.
BUG=None
BRANCH=None
TEST=Built and boot on brox system
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Change-Id: Ic7fbc6386769aa9f76a8665a742c97dfd790fd1d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83662
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Sowmya Aralguppe <sowmya.aralguppe@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Correct the number of NID entries.
BUG=b:349996984
TEST=emerge-brox sys-boot/coreboot sys-boot/chromeos-bootimage
Change-Id: I5f5553a5d8014f957d6b89ac4c1039594817bf32
Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84184
Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Enable ASPM of CPU PCIe4 for SSD to improve power consumption.
BUG=b:364441213
BRANCH=None
TEST="sh -c 'lspci -vvnn || lspci -nn'"
01:00.0 Non-Volatile memory controller
LnkCtl: ASPM L1 Enabled
Change-Id: I4380bb8748f2847b1824e20edb19578c7aedfe4f
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84279
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
lpss_s0ix_enable is already defined as boolean:
`git grep lpss_s0ix_enable $(find -type f -name "*.h")
src/soc/intel/apollolake/chip.h: bool lpss_s0ix_enable;`
Change-Id: I34bd568defe202daaad6136b9c184bc292a226b3
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84160
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Check that lnkCap supports ASPM L1, so set it to ASPM_L1
to avoid excessive power consumption.
BUG=b:364484621, b:361828368
TEST=emerge-brox sys-boot/coreboot sys-boot/chromeos-bootimage
w/o this CL -
```
lspci -vv | grep -A30 "KIOXIA" | grep -E "LnkCap|LnkCtl"
LnkCap: Port #0, Speed 16GT/s, Width x4, ASPM L1, Exit Latency L1 <64us
LnkCtl: ASPM Disabled; RCB 64 bytes, LnkDisable- CommClk+
```
w/ this CL -
```
lspci -vv | grep -A30 "KIOXIA" | grep -E "LnkCap|LnkCtl"
LnkCap: Port #0, Speed 16GT/s, Width x4, ASPM L1, Exit Latency L1 <64us
LnkCtl: ASPM L1 Enabled; RCB 64 bytes, LnkDisable- CommClk+
```
Change-Id: I8a7f69bb82ad24b29566541d7694f87f9c6458d6
Signed-off-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84241
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: wen zhang <zhangwen6@huaqin.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update eMMC DLL tuning values for improved initialization reliability.
BUG=b:361013271
TEST=Cold reboot stress test over 2500 cycles
Change-Id: Icd1f9c7bdec2bc99152a13ac4ce0724a26718a52
Signed-off-by: Qinghong Zeng <zengqinghong@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84248
Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Reviewed-by: Jayvik Desai <jayvik@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Joxer experienced error messages during developer mode entry due to
failed USB-C1 probing.
This patch adds the `DB_USB DB_1C` probe directive to the `conn1`
device in the overridetree, ensuring USB-C1 is only probed when
`FW_CONFIG` supports the applicable hardware SKU.
This should resolve the error flood seen during dev mode entry on
Joxer.
BUG=b:364240631
TEST=Able to build and boot google/joxer to OS without any error.
w/o this patch:
send_packet: CrosEC result code 9
send_packet: CrosEC result code 3
Failed to get PD_MUX_INFO port1 ret:-3
update_all_tcss_ports_states: port C1: get_usb_pd_mux_info failed
send_packet: CrosEC result code 9
send_packet: CrosEC result code 3
Failed to get PD_MUX_INFO port1 ret:-3
w/ this patch:
No error reported during dev mode entry
Change-Id: I8cdefa01409d5a8a75032f30dacde40057e064dd
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84255
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Add a Kconfig choice to select the IGD UMA allocation, which selects a
precompiled ACPB binary with the corresponding UMA value set. Default
to the previous value (128MB) for non-ChromeOS builds, and 64MB for
ChromeOS as that is the value used there.
TEST=build/boot google/morphius, verify UMA size changes with selection
via dxdiag tool under Windows.
Change-Id: I6debd10527c33ce37ef3ada20955c8f7b7500039
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84237
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a Kconfig choice to select the IGD UMA allocation. Default to the
previous value (32MB).
TEST=build/boot google/liara, verify UMA size changes with selection.
Change-Id: Ia53d6d39d4f06c896ec13808234144b89da101f8
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84235
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Reduce resume time.
BUG=b:361728839
TEST=emerge-dedede coreboot chromeos-bootimage
& test touchscreen function on awasuki DUT
Change-Id: I32b2b1c709ecab964a0e449d416c5d0ee2c1d97d
Signed-off-by: Tongtong Pan <pantongtong@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84196
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
According to the Intel OPS spec, the DC power from display is
12~19V@8A max. It can't set PsysPmax by unknown voltage, so get
voltage by ec command "ectool adcread 4" then calculate PsysPmax value.
The OPS display can supply 90W power, configure psys_pl2 to limit
the system power to 90W.
BUG=b:329037849
BRANCH=firmware-brya-14505.B
TEST= USE="fw_debug" LOCALES="en" emerge-brask chromeos-bmpblk
intel-rplfsp intel-adlfsp coreboot chromeos-bootimage
Check adcread value by ectool adcread 4. If get 19540, PsysPmax
should be 19540 * 8000 ~= 156 W.
Check FSP debug log have the following message.
PsysPmax = 156W
Change-Id: Ic6e9c6ce9f3179c7d63c1169695fbc23188456dd
Signed-off-by: Shon <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83593
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
Add control for the 1.2V enable pin in VCM to comply the mipi camera
power sequence.
2.8V enable --> 1.2V enable --> reset
BUG=b:362386165
TEST=Run ITS test
Change-Id: I495b2e266ee3d24ed3334bb9c173b3993d095e8e
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84211
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Based on schematics NB7228A_LOTSO_INTEL_MB_PROTO_20240521A_BOM.pdf update devicetree settings.
BUG=b:333494257
TEST=emerge-brox coreboot chromeos-bootimage and boot on
Change-Id: Id8f30597ef9bceb9bdd4a3267266f1d189aa6fd8
Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84198
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Power consumption according to RTS5227 datasheet section 6.4, L0s is not supported, so set it to ASPM_L1.
lspci -vvvv -s 01:00 to verify LnkCtl: ASPM L1 Enabled.
BUG=b:359409425
TEST=emerge-brox sys-boot/coreboot sys-boot/chromeos-bootimage
Change-Id: I87bb0d195566d273951dee6eeb54c9b388dd7607
Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84177
Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Update PL1 Min value from 6W to 15W based on the brox thermal cooling
capacity and hardware design.
BUG=None
BRANCH=None
TEST=Build and boot on brox board
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Change-Id: I266a78806e065bf7af0d5fcad9b22ab63aa892e2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83661
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When world-facing camera is absent, coreboot need to enable
GPP_R6(DMIC_WCAM_CLK) and GPP_R7(DMIC_WCAM_DATA) for 3rd dmic support
BUG=b:333973512
TEST=Boot google/riven to OS and verify 3rd dmic working properly.
Change-Id: I6c8780ce37b5d3987f5cdf6e6e6d0b4896b33230
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84141
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Jayvik Desai <jayvik@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
With `probe unprovisioned` fw_config rule, there is no need to define an
explicit STORAGE_UNKNOWN option. Hence remove it.
BUG=None
TEST=Build Jubilant FW image.
Change-Id: I4f6ace4b39a1ee0b63486d3872b20c8da719ae4a
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84095
Reviewed-by: Bob Moragues <moragues@google.com>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Tune I2C2 timing:
Set falling time to 250ns from 400ns to meet spec: "THIGH>0.6us"
BUG=b:362685374
TEST= Build jubilant firmware
Measure the i2c signal on jubilant to meet spec:
I2C2 THIGH from 0.494 us to 0.76 us
Change-Id: I42a60edc0b361bfabacf5376ef89f436efedb356
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84143
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Bob Moragues <moragues@google.com>
Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Change-Id: I41a877ed7f5f3d02904dc939b32996a7f6d45373
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84165
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Change-Id: I80ad02ca016ad2c8d0bfeb33e8309002dfe723c0
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84164
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Change-Id: If1cb63847ffbfed9bb09679931cfb23289bf59f0
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84163
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Change-Id: I569b9a69add341bcefe6bd5356b01a95a4e97286
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84154
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
|
|
Generate RAM IDs of lp5 memory:
1)Hyinx 4GB*4 H58G56BK8BX068
2)SAMSUNG 4GB*4 K3KL8L80CM-MGCT
BUG=None
TEST=Run part_id_gen tool and check the generated files.
Change-Id: I6b6e351ceaacfd65eae7b1db14c195b34359689a
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84193
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
|
|
Modify the FP IRQ pin to GPP_D13 from GPP_F15 from HW change on EVT.
The design change to follow the brox's GPE0 routing, and the
FP wake source can be routed.
BUG=b:363166664
TEST= Build jubilant firmware
Change-Id: Ic4a7ca07eab0dab234ab025cf77bbb8093b6b9d1
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84124
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
De-assert PERST# at romstage to reduce the waiting time in ramstage.
Before
```
[INFO ] wait_perst_done: PCIe early PERST# de-assertion is not done,
de-assert PERST# now
[INFO ] mtk_pcie_domain_enable: PCIe link up success (47 tries)
```
After
```
[INFO ] wait_perst_done: PCIe early PERST# de-assertion is not done,
de-assert PERST# now
[DEBUG] wait_perst_asserted: 457568 us elapsed since assert PERST#
[DEBUG] wait_perst_done: 163413 us elapsed since de-assert PERST#
[INFO ] mtk_pcie_domain_enable: PCIe link up success (1 tries)
```
BUG=none
TEST=boot from NVMe
Change-Id: I3a73bd574ae8f9f4e624846ce8b901a7d2209e78
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84118
Reviewed-by: Jianjun Wang <jianjun.wang@mediatek.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
