summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Expand)Author
2018-01-05mainboard/google/zoombini: Add SoC acpi files to dsdt.aslNick Vaccaro
2018-01-05mainboard/google/zoombini: Fix some devicetree pci settingsNick Vaccaro
2018-01-05mainboard/google/zoombini: add mainboard_opsNick Vaccaro
2018-01-05mainboard/google/kahlee: Update Grunt devicetree.Justin TerAvest
2018-01-02mb/google/poppy/variants/nami: Add empty_ddr4.spd.hex for DDR4Kane Chen
2018-01-02google/fizz: Enable SataPwrOptEnable FSP UPDKane Chen
2017-12-22mb/google/fizz: revise LED0 behavior for link speed 100MbGaggery Tsai
2017-12-22soc/intel/skylake: Add PcieRpClkSrcNumber UPD configuartion supportDivya Chellap
2017-12-21google/fizz: Enable ec sw sync gbb by defaultShelley Chen
2017-12-21mainboard/google/fizz: Enable S0ixShelley Chen
2017-12-21google/kahlee: Select fanless SMU firmwareMarshall Dawson
2017-12-20mb/google/fizz: Enable mbox command for ISL VR c-state issueRizwan Qureshi
2017-12-20mb/google/poppy/variants/nautilus: Change USB2 phy settingsh.kim
2017-12-20intel/bd82x6x: Use generated ACPI PIRQTobias Diedrich
2017-12-20google/gru: Adjust to incorrect strapping resistors on KevinJulius Werner
2017-12-20google/gru: Prettify strapping ID ADC tableJulius Werner
2017-12-20mb/google/poppy/variants/nami: Add SPD files for namiFurquan Shaikh
2017-12-20mb/google/poppy: Enable speaker and codec for namiGaggery Tsai
2017-12-19mb/google/poppy: Configure WWAN gpiosFurquan Shaikh
2017-12-19mb/google/poppy: Configure GPP_B0 for WLAN wakeFurquan Shaikh
2017-12-19mb/google/poppy: Configure pen reset and eject linesFurquan Shaikh
2017-12-19mb/google/poppy/variants/nautilus: Enable AER and LTR for root port 1Furquan Shaikh
2017-12-19mb/google/poppy: Configure GPP_B8 for WLAN_PE_RSTFurquan Shaikh
2017-12-19mb/google/poppy/variants/nami: Fix SATA configs againFurquan Shaikh
2017-12-19mb/google/poppy: Configure GPP_F3 as NCFurquan Shaikh
2017-12-19mb/google/poppy/variants/nami: Fix GPIO configuration for DEVSLPFurquan Shaikh
2017-12-19mb/google/fizz: Enable 2nd NIC ledsDavid Wu
2017-12-17mb/google/poppy/variants/nami: Fix SataMode configuration in devicetreeFurquan Shaikh
2017-12-17mb/google/poppy/variants/nami: Fix GPIO config for PCH_SPK_ENFurquan Shaikh
2017-12-15mb/google/snappy: add reset pin for Melfas touch controllerKevin Chiu
2017-12-15mb/google/fizz: set SataMode to AHCI modeKane Chen
2017-12-14mainboard/google/kahlee: Update overcurrent pinsMartin Roth
2017-12-13mb/google/poppy/variants/nami: Disable native SD card controllerFurquan Shaikh
2017-12-13mb/google/fizz: Enable SATA on port 0David Wu
2017-12-12google/kahlee/grunt: Add SPD filesMarc Jones
2017-12-12google/scarlet: support INNOLUX P097PFG panelLin Huang
2017-12-12soc/amd/common: Move Agesa related headersRichard Spiegel
2017-12-12mb/google/poppy/variants/nami: Implement variant_memory_paramsFurquan Shaikh
2017-12-11mb/google/poppy/variants/soraka: Tune I2C5 paramsFurquan Shaikh
2017-12-11soc/amd/common: Move files to common/blockRichard Spiegel
2017-12-11google/gru: Stop mucking with unused I2S0 pins in codec configJulius Werner
2017-12-11google/gru: Change Scarlet SKU ID pins to pull-upsJulius Werner
2017-12-11google/nautilus: Add Maxim98357a supportNaveen Manohar
2017-12-11mb/google/poppy/variants/nautilus: add SPK DMIC nhlt supportNaveen Manohar
2017-12-09google/cyan: fix FSP memory init paramsMatt DeVillier
2017-12-09mainboard/google/kahlee: Update GPIOsMartin Roth
2017-12-09mainboard/google/kahlee: Update PCIe port mapMartin Roth
2017-12-08google/fizz: Set BJ max current and voltageDaisuke Nojiri
2017-12-08mb/google/reef: provide override GPIO table in coralChris Wang
2017-12-07google/scarlet: update Kingdisplay kd097d04 timingLin Huang
2017-12-07kahlee/ec.c: Use new wide IO functionRichard Spiegel
2017-12-07mb/google/poppy/variants/nami: Add support for nami boardFurquan Shaikh
2017-12-07mb/google/poppy: Add support for DDR4 memoryFurquan Shaikh
2017-12-07mb/google/poppy/variants/nautilus: Fix memory paramsFurquan Shaikh
2017-12-07google/gru: Add SKU ID for ScarletJulius Werner
2017-12-07boardid: Switch from Kconfig to weak functionsJulius Werner
2017-12-07boardid: Minor clean up and standardizationJulius Werner
2017-12-06Kconfig: Remove BOARD_ID_MANUAL optionJulius Werner
2017-12-06mb/google/poppy: Remove variant_cros_gpios from variantsFurquan Shaikh
2017-12-06mb/google/poppy: Add config option for camera ACPI supportFurquan Shaikh
2017-12-06mb/google/poppy: Change POPPY_USE_* to VARIANT_HAS_*Furquan Shaikh
2017-12-06mb/google/poppy: Introduce VARIANT_SPECIFIC_OPTIONS_*Furquan Shaikh
2017-12-06mb/google/poppy: Remove dynamic disabling of TPMFurquan Shaikh
2017-12-06mb/google/poppy/variants/soraka: Disable SPI TPMFurquan Shaikh
2017-12-06mb/google/poppy: Disable SPI TPMFurquan Shaikh
2017-12-06google/kahlee: Set USB OC pinsMarc Jones
2017-12-05google/gru: update RAMID tableLin Huang
2017-12-05mb/google/poppy,nautilus,soraka: Disable PD on AC_PRESENT in deep SxFurquan Shaikh
2017-12-04mb/google/fizz: Enable Wake-on-Lan featureGaggery Tsai
2017-12-02google/reef: Fix whitespace inconsistency in coral codePatrick Georgi
2017-12-02google/reef: add more USB tuning for coral variantsPatrick Georgi
2017-12-02mainboard/google/kahlee: Remove usb_oc.asl filesMartin Roth
2017-12-02mainboard/google/kahlee: Add Baseboard GPIOsMartin Roth
2017-12-01mainboard/google/kahlee: Update Kconfig string used in makefilesMartin Roth
2017-11-30mb/google/poppy/variants/nautilus: Disable DPTFFurquan Shaikh
2017-11-30mainboard/google/fizz: Disable DPTF active policyDavid Wu
2017-11-30mb/google/poppy/variants/soraka: Set PCH thermal trip point to 75 degreeCSubrata Banik
2017-11-30mb/google/nautilus: add synaptics touch screen supportChris Wang
2017-11-29google/kahlee: Add SPD functionMarc Jones
2017-11-29google/kahlee: Rename board_id to memory_skuMarc Jones
2017-11-29mb/google/poppy/variants/nautilus: Disable camera devicesFurquan Shaikh
2017-11-29mb/google/poppy: Add variant support for camera aslFurquan Shaikh
2017-11-28google/scarlet: support kd097d04 panelLin Huang
2017-11-28google/gru: correct backlight gpioLin Huang
2017-11-28rockchip/rk3399: support dual mipi dsiLin Huang
2017-11-28mb/google/poppy/variants/nautilus: set I2C speed to 400KHzChris Wang
2017-11-28mb/google/poppy/variants/nautilus: Change IA/GT/SA slow slew rate settingsChris Wang
2017-11-28mb/google/soraka: configure WLAN_PE_RST gpio in early_gpio_tableDivya Chellap
2017-11-28mb/google/poppy/variants/nautilus: correct the SIO_EC_ENABLE_P2SK typoChris Wang
2017-11-28mb/google/poppy/variants/nautilus: remove ALS for nautilusChris Wang
2017-11-28mainboard/google/kahlee: Update Grunt for 16MB ROM chipMartin Roth
2017-11-28mainboard/google/kahlee: Update chromeos.fmdMartin Roth
2017-11-27google/fizz: correct memory rcomp settingsKane Chen
2017-11-25google/fizz: Remove tpm i2c configs from KconfigShelley Chen
2017-11-25google/fizz: Disable unused i2c linesShelley Chen
2017-11-23google mainboards: select SYSTEM_TYPE_LAPTOP where appropriateMatt DeVillier
2017-11-23src/mainboard: Fix various typosJonathan Neuschäfer
2017-11-23google/fizz: Define smbios_mainboard_sku to return OEM IDsShelley Chen
2017-11-22chromeec: Change the API for hostevent/wake masks to handle 64-bitFurquan Shaikh
2017-11-22google/gru: Add support for rainierEge Mihmanli