summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Collapse)Author
2019-07-11google/kukui: Adjust LCM ID voltagesYu-Ping Wu
Currently some of the LCM ID voltage gaps are below 100mV. For example, the voltage difference between ID 2 and 3 is 503-440=63mV. To reduce the risk of misrecognition from the hardware level, the voltages are adjusted so that all the voltage gaps are larger than 100mV. The RD2 resistor values are also updated. BUG=b:136987483 TEST=emerge-kukui coreboot Change-Id: Ib5c1f927fb54d8c9579f030e42eeec5a27daaceb Signed-off-by: Yu-Ping Wu <yupingso@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34192 Reviewed-by: You-Cheng Syu <youcheng@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-11board/kukui: Remove ADC tolerance from boardidHung-Te Lin
The tolerance of ADC is +-10mV, but the resistors may also introduce 1% variation, and causing the final measured voltage to vary around 5%. By the advisory from hardware team, checking the tolerance seems not really solving or helping anything so we should just ignore that and try to find best matched ID (this also aligns to what Gru did). BUG=b:136990271 TEST=Booted on Krane and no longer seeing ADC out of range BRANCH=None Change-Id: Ie02ca5aaafbcfa8f411d973ad0266eee385d6878 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34161 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: You-Cheng Syu <youcheng@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-11mb/google/hatch/variants: Fix nonworking touch padFrank_Chu
Correct ELAN Touch pad IRQ GPIO to GPP_A21 BUG=b:135507215 BRANCH=none TEST=emerge-hatch coreboot chromeos-ec chromeos-bootimage Signed-off-by: Frank_Chu <frank_chu@pegatron.corp-partner.google.com> Change-Id: I60816a4652fa39ab2a91034b268efe8f84a13e17 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33954 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-11mb/google/hatch: Enable/disable GPIO clock gatingTim Wawrzynczak
Before the system enters S0ix or S3, each GPIO community will have its dynamic clock gating turned on. Upon return to S0, the dynamic clock gating will be turned back off. BUG=b:130764684 BRANCH=none TEST=Used dut-power to verify that the clock gating is enabled in S0ix and S3. Also used Store(..., Debug) statements in the ASL code to verify it was getting called. Change-Id: I20ff2aac035eaa5912af6c946d837567a4918bbf Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34180 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-11mb/google/hatch: Enable LPIT inclusion in DSDTTim Wawrzynczak
Include the lpit.asl file in Hatch's DSDT definition. BUG=b:130764684 BRANCH=none TEST=S3 suspend/resume and S0ix entry/exit work correctly. Ran > 200 iterations of suspend_stress_test and no issues found. Change-Id: If8ebff3db091257e8452869636c0e024f3123e8b Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34175 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-07-11mb/google/hatch: Disable GPIO community dynamic clock gatingTim Wawrzynczak
The dynamic clock gating is causing boards to miss interrupts whose pulses are shorter than 4us. Disable it using FSP UPDs. BUG=b:130764684 BRANCH=none TEST=Compiles Change-Id: I8f1ec8f7c31192bce2a761ec99b86638435dc27c Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34176 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Evan Green <evgreen@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-07-11mb/google/hatch: Fix interrupt trigger type for GPP_H0(HP_INT_L)Furquan Shaikh
HP_INT_L(GPP_H0) is configured for GPIO IRQ instead of APIC IRQ since it needs to trigger on both edges. With GPIO IRQ, it is necessary to configure the trigger type in coreboot to match the ACPI configuration. This is because: 1. ACPI configuration is used by intel-pinctrl driver in Linux kernel to re-configure the trigger type for the pad in GPIO DW0 config register. This is done when kernel driver probes and requests irq for its device. 2. On resume from S3, the pad configuration gets reset and coreboot sets the trigger type to LEVEL. However, kernel driver does not probe again. This results in the trigger type being configured incorrectly. This change updates the GPIO configuration for GPP_H0 to set the same trigger type as advertised in ACPI for the kernel. BUG=b:132672011 TEST=Verified that S3 works fine. Verified that interrupt on GPP_H0 works fine on boot as well as after suspend/resume. Change-Id: Ieb44c7403a2f4911b4a8f422053dee8bcfb91d85 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34181 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Sathya Prakash M R <sathya.prakash.m.r@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-10mb/google/octopus: Remove LPDDR4 RAMID index 5,6 CH[1] only SKUKevin Chiu
From Intel EDS: Table 3-5. LPDDR4 Configurations CH00 CH01 CH10 CH11 "x32 BGA" "x32 BGA" "x32 BGA" "x32 BGA" "x32 BGA" "x32 BGA" "Unpopulated" "Unpopulated" CH[1](CH10/CH11) can't use alone without CH[0] BUG=b:135498646,b:136694293 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage Change-Id: I03af74301aad3e688c97992b37c59b20a4fff58a Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34069 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-09arch/x86: Avoid HAVE_SMI_HANDLER conditional with smm-classKyösti Mälkki
Build of the entire smm-class is skipped if we have HAVE_SMI_HANDLER=n. Change-Id: I10b4300ddd18b1673c404b45fd9642488ab3186c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34125 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Lance Zhao <lance.zhao@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-08mb/google/hatch: Set GPP_D9 as enable pin for Goodix Touch Screen andFrank Wu
increase reset off delay time Goodix touchscreen cannot work in normal mode because PP3300_TOUCHSCREEN_DX dropped. Configure GPP_D9 as enable pin in the devicetree.cb to fix the power sequence. Increase reset_off_delay time from 1ms to 3ms to met the HW requirement. BUG=b:135287161 BRANCH=None TEST=local build and measure sequence with Goodix touch screen Change-Id: I33140869990aa4715c780b0fa322921e450530ef Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33808 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-07mb/google/hatch: Update GPIO settings for SD card and SPI1 Chip selectKrishna Prasad Bhat
This patch updates the following GPIO settings. 1. Set Native termination for GPP_G0 - G4 SD card pins. 2. Set GPP_B19 to NF1. BUG=b:123907904 TEST=Verified SD card functionality on hatch. Checked for SD detection, transferred files to and from SD card. Change-Id: I4549ac7377d7f58f51cda0eb96a62604fd31d2f2 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32176 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-07-07mb/google/hatch/var/kindred: Add Raydium touchscreen supportDavid Wu
Add Raydium controller BUG=b:135728282 BRANCH=master TEST= 1. FW_NAME="kindred" emerge-hatch coreboot chromeos-bootimage 2. boot up on kindred DUT to check touchscreen device by evtest /dev/input/event3: Raydium Touchscreen 3. Raydium TS is working Change-Id: Id963300ab0dadcb78786c5a1328c2a4098a48a05 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33857 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-07mb/google/hatch/var/kindred: Update ELAN GPIO/IRQ and add Synaptics TouchpadDavid Wu
Update ELAN GPIO and IRQ setting and add Synaptics Touchpad BUG=b:132708463 BRANCH=None TEST=Verify ELAN/Synaptics touchpad is working fine. Change-Id: I883ce2e50ca5c6bd2b1ca76cbe24177055cc5d60 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33660 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-07mb/google/hatch/variants/kindred: Enable eMMC supportDavid Wu
Enable eMMC support for kindred. Cq-Depend: chromium:1666982 BUG=b:135464155 BRANCH=none TEST=Boot kindred onboard eMMC. Change-Id: I040af6da30313f8dd59e3ef910b290922e090cdc Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33618 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-07soc/intel/cannonlake, mb/google/sarien: Get rid of unused dev paramFurquan Shaikh
This change gets rid of unused dev param to pmc_set_afterg3. BUG=b:136861224 Change-Id: Ic197d6fb8618db15601096f5815e82efc2b539c1 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34117 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-07-03mb/google/octopus: Override DDI1 DDC SDA/SCL for Garg HDMIKevin Chiu
garg 2A2C DB: SKU ID - 1 garg HDMI DB: SKU ID - 9 garg LTE DB: SKU ID - 17 For HDMI SKU9, GPIO needs to be overriden to enable DDI1 DDC SDA/SCL. BUG=b:134912735 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage Change-Id: I6ad8e5aa52f503121b10fe353e4bf4021aee2061 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33552 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2019-07-03mb/google/octopus/variants/fleex: Enable EMR function for Grob360SChris Zhou
Enable EMR Pen Stylus function for Grob360S BUG=b:135968368 BRANCH=octopus TEST=EMR function working normally with HW reworked Fleex. Change-Id: Ia220dc0d3051b79b110b4df66df108f701776478 Signed-off-by: Chris Zhou <chris_zhou@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33802 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-03mb/google/octopus: Add custom SAR values for BlooguardTony Huang
Google project name is Bloog. Bloog is 12-inch LCD. Blooguard is 14-inch LCD so would prefer to use a different SAR values instead. Use sku-id to load the SAR values. BUG=b:135078377 BRANCH=octopus TEST=build and verify SAR load by sku-id Change-Id: Id80df28a961eb1f62714558df2b219aa552ecb97 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33935 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2019-07-02mb/google/hatch: Set trackpad irq and wake to GPP_A21Shelley Chen
Previously, We had to use GPP_A21 for trackpad wake and GPP_D21 for trackpad interrupts due to ITSS not honoring the INVERT config. Now that's fixed, we can configure trackpad wake and interrupts on GPP_A21 only. BUG=b:130436471 BRANCH=None TEST=1. boot a hatch device and make sure we can move the cursor with the trackpad 2. Run powerd_dbus_suspend and wake by clicking on the trackpad and ensure through "mosys eventlog list" that the wake source is the trackpad.\ 3. Run "echo mem > /sys/power/state", wait until device goes into S3, click trackpad to ensure device wakes. Change-Id: I26a99206c42ba442f91ae577b98366fc2fd6c0ca Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33820 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-07-02mb/google/hatch: Add INVERT to all IOAPIC padsShelley Chen
Now that ITSS config is fixed, we can set the IOAPIC pad configs correctly. BUG=b:123967687 BRANCH=None TEST=Make sure Hatch is booting and tested out trackpad to make sure can move cursor and wake by clicking on the trackpad after running powerd_dbus_suspend. Change-Id: I0b125996338b6f16e03b7ca184f6337c696a5f64 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33819 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-02mb/google/reef/variants/: fix Samsung K4F6E3S4HM-MGCJ densityKevin Chiu
Samsung K4F6E3S4HM-MGCJ density is 16Gb BUG=b:121228792 BRANCH=master TEST=emerge-snappy coreboot chromeos-bootimage MemTotal: 8041964kB in /proc/meminfo Change-Id: Ie8ecd82b92d4e82d3955cf773febca30f6280a5e Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33795 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-06-28mb/google/kohaku: Correct trackpad i2c addressSeunghwan Kim
Correct i2c address of trackpad. It should be 0x20. BUG=None BRANCH=None TEST=Verified trackpad works on pre-evt system Change-Id: I7ded21ce8ff9e907e436777a27edb4273512011d Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33798 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Shelley Chen <shchen@google.com>
2019-06-26mb/google/hatch: Add a GPIO to enable/disable FPMCU powerPhilip Chen
A FPMCU power-control pin (GPP_C11) is added to the latest hatch reference schematic. Even though this is not implemented in hatch rev1 board, the future hatch family boards with FPMCU should all have this control pin. On the old boards without this control pin, GPP_C11 is a floating TP, and thus this patch should be backward-compatible. BUG=b:130307667, b:135216932 TEST=build Signed-off-by: Philip Chen <philipchen@google.com> Change-Id: I6a84eeb6aab562258e749a8a5d09dadfa0e43587 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33655 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-26mb/google/hatch: Remove pulls on NC padsFurquan Shaikh
There is no need to add internal termination (PU/PD) on the not-connected pads. This change gets rid of the terminations on the NC pads. Change-Id: I3df538d7127e5ef75e6e6ff9db3524e26f0450ed Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33570 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-06-26mb/google/hatch/variants/baseboard: Update PL2 power limit valueSumeet Pawnikar
Update PL2 power limit value from 44W to 64W. BUG=None BRANCH=None TEST=Build and Boot hatch EVT Change-Id: I3f4b5ab8bf0ce9464c322c148843f5a3e8d706d9 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33662 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Shelley Chen <shchen@google.com>
2019-06-25atlas: enable GEO_SARCaveh Jalali
BUG=b:131634035 BRANCH=none TEST=verified SAR data shows up in ACPI SSDT table. Change-Id: I65ef59c9616b1cae3fa4c4b18bbfe4ed098d2891 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-21mediatek/mt8183: support SAMSUNG and MICRON EMCP LPDDR4X DDR bootupHuayang Duan
Support SAMSUNG KMDP6001DA-B425 and MICRON MT29VZZZAD8DQKSL EMCP LPDDR4X DDR From the calibration log of MICRON MT29VZZZAD8DQKSL, we found the begin pass range of RX window earlier than with other DDR type. So need change the DQS starting offset to increase the scan range of RX window. BUG=b:80501386 BRANCH=none TEST=Boots correctly on EMCP DRAM Change-Id: I5fcc8673a2fbd7ec3a8776ab61c57f8903ddda20 Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32243 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Huayang Duan <huayang.duan@mediatek.corp-partner.google.com>
2019-06-21mb/google/octopus: Override VBT selection for GargKevin Chiu
Garg proto build has 3 SKUs: garg 2A2C DB: SKU ID - 1 garg HDMI DB: SKU ID - 9 garg LTE DB: SKU ID - 17 For SKU#9, VBT will need to be overridden to enable DDI_C output to HDMI BUG=b:134912735 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage Cq-Depend: chrome-internal:1380847 Change-Id: I6c0ec086496eaf217ea8e326f5084d886d0e698f Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33395 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2019-06-21mb/google/octopus: expose get_board_sku as globalKevin Chiu
BUG=b:134912735 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage Change-Id: I1fb7b5eeac48f2cd9c24fa1d3ac3fe4b390762d2 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33448 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-21mb/google/hatch/variants/kindred: Update memory strap GPIOsDavid Wu
According to the latest schematic (b:127996858#comment38), MEM_CONFIG_0 --> GPP_H19 MEM_CONFIG_1 --> GPP_H22 MEM_CONFIG_2 --> GPP_F10 MEM_CONFIG_3 --> GPP_F3 BUG=none BRANCH=none TEST=Boot kindred proto board Change-Id: Ib79f9454116583a94fe1fd53a37ed928d32988d5 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33617 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-06-21sb/intel/bd82x6x: Set up io_gen_dec in romstage based on devicetreeArthur Heymans
Set up generic decode ranges based on the devicetree settings. Change-Id: Ie59b8272c69231d6dffccee30b4d3c84a7e83e8f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33548 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-06-21soc/intel/skylake: Clean up KconfigArthur Heymans
This does the following: - select MAINBOARD_USES_FSP2_0 on Kabylake (does not support FSP1.1) - Remove stale Kconfig option on intel/saddlebrook - select SOC_INTEL_KABYLAKE on intel/kblrvp Change-Id: I64f48eeb00150aea039d533b0ac471fdd8483b90 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33561 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-06-21qcs405: Update bootblock sizeNitheesh Sekar
Increase the size of bootblock from 96K to 128K. Change-Id: Ifc6e7239ed2978a8490fa229945ebd5ed9182298 Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33159 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-21mb/google/hatch: Do not pull down GPP_F2 internallyPhilip Chen
There is already an external pull-up/down resistor tied to this pin to identify if the board is single-channel or dual-channel memory SKU. BUG=b:135496271 BRANCH=none TEST=build Signed-off-by: Philip Chen <philipchen@google.com> Change-Id: Ie218657fd9dde113ab26cf5551d1dff1b6e392b6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33583 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-21google/kukui: Increase SPI flash speed to boot fasterMengqi Zhang
Increase SPI flash speed from 26MHz to 56MHz and set correct tick_dly to get faster boot process. BUG=b:80501386 BRANCH=none TEST=emerge-kukui coreboot; emerge-elm coreboot Change-Id: I8f44883b4f4a198146330caf5420dc39d5592a0a Signed-off-by: Mengqi Zhang <Mengqi.Zhang@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32462 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-21mediatek: Add SPI tick_dly settingMengqi Zhang
Add spi tick_dly setting for high-speed spi xfer. BUG=b:80501386 BRANCH=none TEST=emerge-kukui coreboot; emerge-elm coreboot Change-Id: Ie49fc3efe2a4a6dcdf2a2fc4c91b47e35d4f086e Signed-off-by: Mengqi Zhang <Mengqi.Zhang@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32461 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-06-21mediatek/mt8183: Add SPI GPIO driving settingMengqi Zhang
Set SPI GPIO driving to support SPI FLASH. BUG=b:80501386 BRANCH=none TEST=emerge-kukui coreboot; emerge-elm coreboot Change-Id: I95002ec71abd751c33c089185db04ed4a8686699 Signed-off-by: Mengqi Zhang <Mengqi.Zhang@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32460 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-21google/kukui: Enable RTCYou-Cheng Syu
Enable RTC so that we can see correct timestamp in CrOS eventlogs. BUG=b:134461866 TEST='mosys eventlog list' shows correct timestamp on Kukui Change-Id: Ie9ef7c9343c781e348429cd5376a4a5519641e16 Signed-off-by: You-Cheng Syu <youcheng@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33356 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-06-21google/kukui: Revise FMAP firmware layoutHung-Te Lin
Adjust FMAP sections that - ELOG only needs 4K (by driver limitation) - SHARED_DATA only needs 4K or less (for netboot params) - SMMSTORE is probably not needed since UEFI@ARM is not available yet - VPD can be smaller (most x86 devices have only 16/8K for RO/RW) - Increase RW_LEGACY to 1M (recommended value) - Move all new saved space to CBFS BUG=b:134624821 TEST=Built Kukui image and boots on Rev2 units. Change-Id: Id2910df73ea47bfa32e056d631d1c3e5f1eed0d1 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33239 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-06-21mb/google/snappy: Remove unneeded 'else'Elyes HAOUAS
'else' is not needed after a 'break' or 'return'. Change-Id: I7b6c319a58b9f4f47de19336d18d00b73d3d3772 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33335 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Vlado Cibic Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-06-21mediatek/mt8183: Calibrate vsim2 to 2.7 VHsin-Hsiung Wang
The default voltage of vsim2 is set to 2.76V for sim card usage. In general, 2.76V of vsim2 is composed of 2.7V main voltage and 0.06V calibration voltage. However, vsim2 is used for the tx_ovdd power of display port IT6505 on the kukui board design which needs 2.7V. So we set it to 2.7V with modifying calibration value. BUG=b:126139364 BRANCH=none TEST=measure vsim2 voltage with multimeter Change-Id: I4dffdde89cbde91286d92e6c2b445f0b3d0ad2fe Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32057 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-06-20mb/google/hatch: Remove unused USB2 port5 from baseboard devicetreeAamir Bohra
Hatch newer board revision do not use USB port5 for discrete BT. Hence remove the port configuration and UBS2 P5 asl entry. The older board version would continue to use USB2 P5 hence moved the entry to overridetree.cb Change-Id: I98297d6b81e3184b7b0a14710f3790f5df30d68b Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33060 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-06-19grunt: Change Bayhub eMMC base clock to 200MHzRaul E Rangel
The clock was previously set to 52MHz to workaround the fact that depthcharge didn't support tuning. Tuning has now been enabled in depthcharge: https://chromium-review.googlesource.com/c/chromiumos/platform/depthcharge/+/1655553 BUG=b:122244718 TEST=Verified on grunt that it speeds up boot by 130ms Change-Id: If847cea2a7848bcd175958db86e652d4f710201a Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33430 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-06-19src/mainboard: Remove unused include <arch/byteorder.h>Elyes HAOUAS
Change-Id: I3d638febddbd88cd4870795f96dd1bbf123c7ba3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33537 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-19mb/google/hatch/variants/hatch: Adjust all I2C CLK to meet specJohn Su
After adjustment on Hatch Touch Pad CLK: 383.4 KHz Touch Screen CLK: 381.6 KHz SAR Sensor CLK: 392.0 KHz Audio codec CLK: 386.0 KHz BUG=b:134911522 BRANCH=master TEST=emerge-hatch coreboot chromeos-bootimage measure by scope with hatch. Change-Id: Iee2b692c268381af267b70e92a577ac89ce41cbb Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33384 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-17mb/google/poppy/variants/atlas: Update DPTF parameterPuthikorn Voravootivat
The temperature delta between on-board thermistor and surface temp change, so update DPTF parameter accordingly. BUG=b:113101335 TEST=Tested in thermal chamber by thermal team. See comment 148 / 153 in the bug. Change-Id: Ie18be94fc1e7476755fb0e6947cce559854a82dd Signed-off-by: Puthikorn Voravootivat <puthik@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33180 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@google.com> Reviewed-by: Bob Moragues <moragues@google.com>
2019-06-16mb/google/hatch: Move memory strap GPIOs under variant gpio headerAamir Bohra
Move the memory strap gpios to variant/gpio.h, as the memory straps are different for helios. Change-Id: I1833c9539687011ee27fd3e88c0581e30ca59354 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33541 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-15mainboard/google/hatch: Scrub Helios GPIOsTim Wawrzynczak
Helios has a number of GPIO changes w/r/t to its baseboard. Override early, sleep and normal GPIOs as appropriate. BUG=b:135257452 BRANCH=none TEST=Compile only (no boards to test with) Change-Id: I45793ad6515df5af5b925d92106bd943374353d4 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33485 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-15mb/google/octopus/variants/bloog: Set tcc offset for bloogTony Huang
Change tcc offset from 0 to 10 degree celsius for bloog. BUG=b:135225497 BRANCH=octopus TEST=Build and verify test result by thermal team. Change-Id: I4cbff846914a776c67692005f8b40cd73cfaf231 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33461 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2019-06-14mb/google/poppy/var/nami: Ensure SPD index is non-zeroJacob Garber
Memory id's are 1-indexed for DDR4, so we need to check that the SPD index is non-zero before converting it to the 0-indexed value in the bitmap. Change-Id: Icc542239d91c39b89c23f31856c28e7c20b2fc4d Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1387028 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33183 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-06-14hatch: Fix pen eject wake polarityTim Wawrzynczak
The gpio_key wakeup_event_action in the ACPI tables was backwards, causing devices to wake up on pen insertion instead of removal. Changed to EV_ACT_DEASSERTED. BUG=b:134547896 BRANCH=none TEST=Verified in OS, device only wakes up on pen removal Change-Id: I0816ed9fb23cf00fd8e40bcdd25ff7a9f48badbd Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33427 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-14mainboard/google/hatch: Update Helios device treeTim Wawrzynczak
Update Helios device tree override to match schematics. BUG=b:133182138 BRANCH=none TEST=Compiles Change-Id: I3d15fc43651a289d16ffb3cfadaea8f786e858fc Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33050 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-13mb/google/hatch/variants/helios: Use LPDDR3 memoryPaul Fagerburg
Change the SPD makefile to use the LPDDR3 SPDs. Set up the arrays for mapping SoC DQS pins to LPDDR3 pins. BRANCH=none BUG=b:133455595 TEST=`FEATURES="noclean" FW_NAME="helios" emerge-hatch chromeos-ec depthcharge vboot_reference libpayload coreboot-private-files intel-cmlfsp coreboot-private-files-hatch coreboot chromeos-bootimage` Ensure the firmware builds without error. Change-Id: Iebaba2ec65dfcf36674b4733b421ada107b22b09 Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33456 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-13mb/google/sarien: Disable unused GPIOsDuncan Laurie
These 4 GPIOs are being disconnected in the next board so use the board ID to configure these pins as not connected to ensure they do not cause leakage. Also remove the ACPI _PTS S5 code that was configuring the GPIOs. This does mean they will cause small leakage in S5 on existing boards, but it will not affect the new boards. BUG=b:132393441 TEST=boot on sarien with fake board ID and ensure that coreboot configures these pads as expected. Change-Id: I6ac04b9a635829811a09aeab7cba3bb58cfcff47 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33450 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
2019-06-13mb/google/{hatch, sarien, arcada}: Make HECI1 chip config disableSubrata Banik
This patch is not actually disabling HECI1 as it requires a dedicated FSP UPD for WHL/CML SoC code to set this HECI1 chip config. Change-Id: Ia88f3315a9dc3365d0acc13ed887e7c596c97c91 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33194 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-12mb/google/octopus: make new targets have DRAM part in CBI by defaultAaron Durbin
All new targets utilizing octopus mainboard support default to always using DRAM_PART_NUM_IN_CBI. This allows easier addition of new targets. BUG=b:132668378 BRANCH=octopus Change-Id: Idb136aa960260abe1657b16ded02a7dfb63c6849 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33370 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-12{drivers,soc/intel/braswell}: Implement C_ENVIRONMENT_BOOTBLOCK supportFrans Hendriks
No C_ENVIRONMENT_BOOTBLOCK support for Braswell is available. Enable support and add required files for the Braswell Bootblock in C. The next changes are made support C_ENVIRONMENT_BOOTBLOCK: - Add car_stage_entry() function bootblock-c_entry() functions. - Specify config DCACHE_BSP_STACK_SIZE and C_ENV_BOOTBLOCK_SIZE. - Add bootblock_c_entry(). - Move init from car_soc_XXX_console_init() to bootblock_soc_XXX_Init() Removed the unused cache_as_ram_main() and weak car_XXX_XXX_console_init() BUG=NA TEST=Booting Embedded Linux on Facebook FBG-1701 Building Google Banos Change-Id: Iab48ad72f1514c93f20d70db5ef4fd8fa2383e8c Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29662 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-06-12mb/google/hatch: Disable dynamic clock gating for cr50's GPIOSubrata Banik
Disable dynamic clock gating for the community cr50's IRQ lives on. That IRQ is pulsed very quickly, and with clock gating enabled pulses tend to be missed. This is expecially true on the default 0.0.22 firmware that cr50 comes with out of the factory. BUG=b:130764684 b:130338605 BRANCH=None TEST=Boot hatch with cr50 "intap" firmware that can vary the pulse width, observe that even with sub-microsecond pulses no IRQs are missed. Change-Id: I34d14fb7cc97e33eecfda2c99cc53a541c87662d Signed-off-by: Subrata Banik <subrata.banik@intel.com> Signed-off-by: Evan Green <evgreen@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33326 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-12Revert "mb/google/poppy/variants/atlas: enable NVMe"caveh jalali
This reverts commit 41979d862a972375d6800afdf2b8b52d408fd220. Reason for revert: NVMe is no longer supported. BUG=b:134752066 Change-Id: I95f2e5f5efe2417700d458f0efd3c793fd8ce8c3 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33307 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Bob Moragues <moragues@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-11mainboard/google/kahlee: Reduce VRAM to 16MBMartin Roth
It was determined through testing that 16MB of reserved VRAM is sufficient. Additional RAM for the graphics driver is allocated out of system memory. BUG=b:123579702 TEST=Boot Grunt, watch VRAM usage with graphics driver logging. Change-Id: I44b640f015b45c0dc3d701929549f3a1082a9268 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33368 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-10mb/google/sarien/variants/arcada: Update thermal configuration for DPTFMike Hsieh
Update dptf for arcada DVT2. BUG=b:123924662 TEST=Built and tested on arcada system Signed-off-by: Mike Hsieh <mike_hsieh@wistron.corp-partner.google.com> Change-Id: I302b7cd4c7e0579acb5482800241b5229cfc49f7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33360 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-06-10mb/google/poppy/variants/nami: remove redundant breakEric Lai
Break never comes after return, remove it. BUG=N/A BRANCH=firmware-nami-10775.108.B TEST=N/A Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I005918d6a04cd21df496dea0f2cb1ed6108675af Reviewed-on: https://review.coreboot.org/c/coreboot/+/33299 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-09mb/google/hatch: Add 16G 2666 LPDDR3 SPDShelley Chen
One variant is asking for support for 16G 2666 LPDDR3, so adding generic SPD for that. BUG=b:133455595 BRANCH=None TEST=None as this is not being used yet Change-Id: If16a101119aabc30d6ea83e95e9ded2e089a982d Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33274 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-06-09mb/google/hatch: Add 8G 3200 SPDShelley Chen
One variant is asking for support for 8G 3200 DDR4, so adding generic SPD for that. BUG=b:132920013 BRANCH=None TEST=None as this is not being used yet Change-Id: I89cd3287aaf0baf384c4fe82d0881b0c48e09753 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33258 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-09mb/google/dragonegg: Pass FSP-M UPD as per dragonegg requirementSubrata Banik
TEST=Able to boot dragonegg board with LPDDR4 memory. Change-Id: Idbe0aa79879f2b1a754dd1f6718ad4ba1173e760 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31956 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06mb/google: Add GPU panel settings for SKL/KBL boardsNico Huber
The values are generated from the respective VBTs. Change-Id: Ic74e9dac898c17ce64a94b06682997a39daeff69 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30247 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Thomas Heijligen <src@posteo.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06qcs405: Add PRESERVE flag for RO_VPDNitheesh Sekar
Add PRESERVE flag to preserve the VPD data. Change-Id: I78ab4de31030465345c5ae58813bfed5e27494fb Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33020 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/amd/stoneyridge: Move LPC support to commonMarshall Dawson
AMD devices traditionally have the LPC-ISA bus at 14.3 and the definition has been very consistent. Relocate the feature from stoneyridge into common/block. BUG=b:131682806 Change-Id: I8d7175b8642bb17533bb2287b3e3ee3d52e85a75 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32653 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/amd/stoneyridge: Move GPIO support to commonMarshall Dawson
The banked GPIO functionality in the AcpiMmio block has been consistent since the Mullins product. Move the basic support into a common directory. Each product's pin availability, MUXes, and other details must remain specific to the product. The relocated source also drops the weak configure_gevent_smi() that reports SMI is not available. The stoneyridge port relies on SMI to do its initialization, similar to modern soc/intel devices. This is the plan for future soc/amd ports, so make a missing function a build error instead of a runtime warning. BUG=b:131682806 Change-Id: I9cda00210a74de2bd1308ad43e2b867d24a67845 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32651 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-06-05mb/google/hatch: Increase RW_LEGACY to 1M for 16MB BIOSShelley Chen
The RW_LEGACY section needs to be minimum 1M. For the 16MB BIOS region, we had this region set too small, which was causing the firmware_FMap FAFT test to fail. BUG=b:133857135, b:129464811 BRANCH=None TEST=test_that -b hatch <IP> firmware_FMap Change-Id: Ie6311613ca3bb08e7f058a41d12f9a1153dc9c5e Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33212 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-06-04mb/google/sarien: Fix SSD's power off sequence before going to S5Roy Mingi Park
BUG=b:133389422 TEST=check SSD's power off sequence to meet PCIE requirement. SSD's reset should be cleared before clearing SSD's power EN Pin. Change-Id: Ia106b805deafb8a442b56bcce91b51135cb32988 Signed-off-by: Roy Mingi Park <roy.mingi.park@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33182 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-04mb/google/hatch: Enable LTR for PCIe portsFurquan Shaikh
Enable LTR for NVMe and WiFi PCIe ports so that they can use ASPM L1.2 BUG=b:134195632 TEST=Verified L1 substate with lspci on hatch: Before: L1SubCtl1: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2- ASPM_L1.1+ After: L1SubCtl1: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ Change-Id: I7fce60897b78dde12747ac7fb857c988d16118ab Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33161 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-03mb/google/poppy/variants/nami: Add fallthrough commentJacob Garber
This fallthrough is intentional (see commit 2257a35862 - Perform PL2 setting for syndra), so add a comment to make that explicit. Change-Id: I57fe1e08f59aed12544cd2a71f1e0464f432f03b Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1397063 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33156 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-03mb/google/link: Remove Link's own native graphics initNico Huber
The code was already orphaned since its hook-up was removed with a6be58fece (nb/intel/sandybridge: Remove the C native graphic init). Change-Id: Ia554c457e2f3a2dc42965ac5cded0be8e82311fb Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33128 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-06-02soc/intel/baytrail: set default VBIOS filename and PCI IDMatt DeVillier
All Baytrail boards have the same GPU PCI ID, so set it here to avoid having to set it in each board's config. Move the VGA_BIOS_FILE config from google/rambi into soc/baytrail since it likewise applies to all Baytrail boards. Change-Id: Id1e0580b55e3590d868cb839987f06c49bb07cf5 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33026 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-02google/buddy: fix Windows ACPI error with WLANMatt DeVillier
Buddy's WLAN ACPI code was equivalent to, but formatted differently from the other auron variants. Since only differnce is root port used, have buddy use common WLAN ACPI and use preprocessor guards to set the root port correctly. Test: build/boot Buddy, verify Windows 10 boots without ACPI BIOS ERROR. Change-Id: I78d994f2bb3981d4d10cb534cd6e0ae673f73527 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30523 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-02qcs405: Enable SPI-NORNitheesh Sekar
Enable support for Gigadevice spi-nor flash. Change-Id: I340eb3bf77b25fe3502d4b29ef4bf7c06b282c02 Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29968 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-06-02qualcomm/qcs405: enable SPI bus 4 for TPMPatrick Georgi
Change-Id: Ic282daf10dad42bc4513cc55f15ce80a4bd316a5 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Signed-off-by: Prudhvi Yarlagadda <pyarlaga@codeaurora.org> Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30934 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-31mainboard/google/hatch: Add Helios supportTim Wawrzynczak
Add Helios as a variant of Hatch. BUG=b:133182138 BRANCH=None TEST=util/abuild/abuild -p none -t google/hatch -x -a attempts to build a Helios target. Change-Id: I64ba06932eb0ee32405f7b14a94971a64c8fce71 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32918 Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-31mb/google/hatch: Create helios variantTim Wawrzynczak
Created helios (hatch variant). Currenly copied from kohaku. Helios- specific changes will come later. BUG=b:133182138 BRANCH=none TEST=none Change-Id: I9d151621a1c42e6f3cadb288f7ea476828c059b5 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32919 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-05-31mb/google/hatch: Create kindred variantPaul Fagerburg
Create the Kindred variant of Hatch by taking a copy of the Hatch files as placeholders. Kindred-specific changes will happen in future CLs. BUG=b:133181366 BRANCH=NONE TEST=util/abuild/abuild -p none -t google/hatch -x -a make sure the build includes GOOGLE_KINDRED Change-Id: I09ad3da0505d599fc3797d7fa24b4dc170dcd18b Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32936 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-05-29drivers/intel/fsp1.1: Simplify bootflow and clean upArthur Heymans
This gets rid of the boilerplate back and forward calls between the SOC/FSP-driver code and mainboard code. Change-Id: I5d4a10d1da6b3ac5e65efd7f82607b56b80e08d4 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32961 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-29commonlib: fix typo LB_TAB_* (instead of LB_TAG_*)Patrick Georgi
Also adapt all users of these symbols Change-Id: Ibf924a283d438de49a93ce661b0d9ca1a81cd6d1 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32956 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-29google/clapper: fix up devicetreeMatt DeVillier
When clapper was upstreamed, the devicetree was pulled from the wrong firmware branch, leading to some incorrect settings and touchpad, touchscreen, and audio not working. Correct devicetree settings using Chromium branch firmware-clapper-5216.199.B Test: build/boot google/clapper, verify touchpad/touchscreen/audio functional under Linux (GalliumOS 3.0/kernel 4.16.18). Change-Id: Iacfce575a054b1f484149f36d0aa83d20d034d8a Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33025 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-05-29mb/google/{misc}: set default SMBIOS manufacturerMatt DeVillier
Legacy Google mainboards (pre-Skylake) shipped with the SMBIOS manufacturer set to GOOGLE, which many Linux drivers rely on for application of DMI quirks. Set it as the default to avoid having to do so for each board's config Change-Id: I61b0217f3535852d7d6e24a1ac78075c20c0825a Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33027 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-05-29mb/google/sarien: Send post code to the ECEric Lai
Use the mainboard post code hook to inform the wilco EC driver of the every stage. BUG=b:124401932,b:133466714,b:133600566 BRANCH=sarien TEST=Remove DIMM module, confirm diagnostic LED pattern for memory failure (2 amber, 4 white). Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: Ic71e4a6e62b63ca2fd189957c4d6f49b61b934de Reviewed-on: https://review.coreboot.org/c/coreboot/+/33047 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-05-29mb/google/poppy/variants/nami: Disable FPMCU for non-fingerprint variantsIvy Jian
Even fingerprint device probe failed on non-fingerpint boards,the CRFP driver still register the device that cause the GPE#1 as wake source every time. Override devicetree for non-fingerpirnt variants to avoid unexpected wake event(GPE#1). BUG=b:129650040 BRANCH=firmware-nami-10775.108.B TEST=Boots to OS and check no GPE#1 wake event from eventlog when S0ix exit. Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Change-Id: I6fa96e04a34e296889414b96a8c604fc61b8a236 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33017 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: John Su <john_su@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-28mb/google/sarien: Modify SSD power sequenceEric Lai
Due to we turn off SSD power in S5. CB:32952 Based on M2 spec we have to turn on SSD power before RST assert. BUG=b:133389422 TEST=verify warm boot and cold boot are boot successfully. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I5b78bab4be675bbb8795361bcfa5af52cb54bb1e Reviewed-on: https://review.coreboot.org/c/coreboot/+/33029 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-05-28mb/google/sarien: Fix SSD power leakage in S5Eric Lai
Turn off SSD power in S5. BUG=b:133389422 TEST=measure H13 is low in S5 Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I40b5381cac33b0eac962a7730ee5c57e60e6d375 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32952 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-05-28mb/google/sarien: Modify arcada touchscreen reset delayCasper Chang
Modify reset delay to 20ms of touchscreen to address i2c hid driver rebind failed issue after auto update of touchscreen firmware BUG=b:132211627 TEST=Touchscreen works after auto update and no re-bind driver failed issue Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com> Change-Id: If17afbd160a2c97beb69d0cb50e4a7dc654775f5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32988 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Crews <ncrews@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-05-23mb/google/hatch/variants: Fix DPTF sensor IDsEvan Green
There are indeed two temperature sensors hooked up to the EC, but they are indexed as 0 and 1, not 1 and 2. BUG=b:132999028 TEST=Boot hatch with hardened EC, observe no more index overflows Change-Id: Ia7f503bc1dc941635db52fce40f217bf34da6d2b Signed-off-by: Evan Green <evgreen@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32920 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-05-23src/mainboard/google: Adopt Mainboards to changed Type41 FuncChristian Walter
Required for automatic onboard device detection in the next patch. Change-Id: I3087de779faf8d006510c460b5372b22ae54b887 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32909 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-22mb/google/sarien: Send post code to the ECDuncan Laurie
Use the mainboard post code hook to inform the wilco EC driver of the latest boot stage. BUG=b:124401932 BRANCH=sarien TEST=build coreboot for sarien and arcada platforms TEST=Remove DIMM module, confirm diagnostic LED pattern for memory failure (2 amber, 4 white). Change-Id: If5bf69365d8be3bdbd433f305c85848206ded7b0 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32937 Reviewed-by: Jett Rink <jettrink@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-21mb/google/octopus: Create Garg variantKevin Chiu
This commit creates a garg variant for Octopus. The initial settings override the baseboard was copied from variant bobba. BUG=b:132668378 BRANCH=master TEST=emerge-octopus coreboot Change-Id: I9a36bc5dc3d2b891b1bce86015aa264894d1434b Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32835 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2019-05-21mb/google/kohaku: Set ACPI_GPIO_IRQ_EDGE_BOTH for headset INTKane Chen
Currently, GPP_H0 gpio input rout is set to GPI_INT. So, ACPI_GPIO_IRQ is required for GPP_H0 in devicetree This change also aligns hatch's setting. BUG=b:131742713 TEST=headset is working Change-Id: Ie1264641bc4dfa5f98b6dab2d6f2133a6f9cbdb8 Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32845 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ben Kao <ben.kao@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-05-20mb/google/{arcada, hatch, sarien}: Override FSP default GPIO PM configurationSubrata Banik
sarien/arcada: GPIO_COMM_0/2/3/4: Enable gpio community all PM configuration GPIO_COMM_1: Disable RCOMP clock gating due to GPP_D18 IRQ mapped for H1 TPM. hatch: GPIO_COMM_0/1/2/3: Enable gpio community all PM configuration GPIO_COMM_4: Disable RCOMP clock gating due to GPP_C21 IRQ mapped for H1 TPM. BUG=b:130764684 TEST=H1 TPM interrupt working find and able to boot from fixed boot media Change-Id: Ia4d5483847a4d243b9038119d4bb5990591cc754 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32848 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-05-20mb/google/dragonegg: Override FSP default GPIO PM configurationSubrata Banik
GPIO_COMM_0/2/3/4: Enable gpio community all PM configuration. GPIO_COMM_1: Disable RCOMP clock gating due to GPP_D16 IRQ mapped for H1 TPM. BUG=b:130764684 TEST=H1 TPM interrupt working find and able to boot from fixed boot media Change-Id: I1f83f938f201c6574367960b1027555767cf6f3d Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32847 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-05-20mb/google/hatch: Change SD_CD# reset config to PLTRSTKrishna Prasad Bhat
The system should boot fine to OS on pressing power button before the system enters G3. However, on hatch, we observe that the system waits for few seconds at "Starting kernel" and then resets, with SD card tray inserted and SD_CD# pad reset config set to DEEP. Hence configuring SD_CD# pad reset config to PLTRST. BUG=b:129933011 TEST=Built and verified on hatch. Change-Id: Ic4466b96332f095ff39b28d98607e95fc3d12d6a Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-05-20mb/google/octopus: Override emmc DLL values for CastaJamie Chen
New emmc DLL values for Casta BUG=b:122307918 TEST=Boot to OS on 12 systems Change-Id: Ie51885fb9628fa093ecc38f4a3f3157f751ca9ab Signed-off-by: Jamie Chen <jamie.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32799 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2019-05-18mb/google/sarien: Set serial number in SMBIOSDuncan Laurie
Set the system serial number from the VPD key "serial_number" and the mainboard serial number from the VPD key "mlb_serial_number". BUG=b:132970635 TEST=check serial number is set in SMBIOS based on VPD, and if there is no VPD key found then it is empty. Change-Id: Ia8f1486dcb1edc968b8eb1e6d989b10c05913aca Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32851 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 02:08:51 +0000