summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Collapse)Author
2021-06-17mb/google/guybrush: Add helpers for cbi fw_config settingsMartin Roth
Turn on CBI and add helper functions for determining the board configuration from the firmware config settings in CBI. BUG=b:187316460 TEST=Built Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I212e7f413b4d8a7d15122cde90100a0ec28e88a6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54639 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-17mb/google/brya/brya0: Update GPIO tables based on new board revTim Wawrzynczak
This change also restores GPIOs to their proper settings for prior board revs. BUG=b:189362981 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I89d7ba94dfbd5e4a000cdde7a0c65f38b53b722d Reviewed-on: https://review.coreboot.org/c/coreboot/+/55325 Reviewed-by: Varshit B Pandya <varshit.b.pandya@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-17mb/google/dedede/var/kracko: Configure I2C high and low timesTony Huang
Configure I2C high / low time in device tree to ensure I2C CLK runs under I2C_SPEED_FAST (400 kHz). Touchpad: 387.7kHz Touchscreen: 389.4kHz Audio: 387.6kHz P-sensor: 372.5kHz BaUG=b:178092096 BRANCH=dedede TEST=Build and EE check after tuning I2C clock is under 400kHz Change-Id: I4f6bdd3802cd94671325a89458cde981a2ffa929 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55407 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-06-17mb/google/cherry: fix GPIO polarity for TPM interruptRex-BC Chen
The GPIO_GSC_AP_INT itself is active low, but the payloads will create the IRQ using its eint driver, which is active high. BUG=b:188392736 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ie39f3b9a5dbe15057ef3e96f6c99211949692003 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55562 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-06-17mb/google/cherry: Add display configurationRex-BC Chen
BUG=b:189985956 Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com> Change-Id: I2b68f6342e7d46d90ea0e7aef9a01ecfd35f8fa9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55525 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-06-17soc/amd/picasso: introduce and use devicetree aliases for UART0-3Felix Held
Since the default state of the MMIO UART devices in the chipset devicetree is off, the mainboard devicetree entries that disable MMIO UART devices are removed. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I913a587802020ce4e182b48632cdde1104c2a6e6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55545 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-17mb/google/dedede: Create cappy variantZhi Li
Create the cappy variant of the waddledee reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:190515828 BRANCH=None TEST=util/abuild/abuild -p none -t google/dedede -x -a make sure the build includes GOOGLE_CAPPY Signed-off-by: Zhi Li <lizhi7@huaqin.corp-partner.google.com> Change-Id: Id5a3b0cb475ee77a9f62523d8322a5e4123ce3be Reviewed-on: https://review.coreboot.org/c/coreboot/+/55451 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com> Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-06-17mb/google/dedede/var/pirika: Add camera supportAlex1 Kao
Add camera support in devicetree. BUG=b:190797339 BRANCH=None. TEST=built pirika firmware and verified camera function is OK. Change-Id: I66ded32105f3166e2faec3ea5dcfb93c29822366 Signed-off-by: Alex1 Kao <alex1_kao@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55450 Reviewed-by: Kirk Wang <kirk_wang@pegatron.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-17mb/google/brya: Configure WWAN GPIO earlyVarshit Pandya
In order to meet timing requirement of WWAN reseting it in early GPIOs and asserting Reset GPIO in ramstage BUG=b:180166408 TEST=Build and boot Brya system and verify enumeration of L850 and FM350 devices Signed-off-by: Varshit Pandya <varshit.b.pandya@intel.com> Change-Id: Id6d69696b6c645eec3fa314a608c69214bafba82 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54912 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-17mb/*: Fix some indirect includesKyösti Mälkki
Fix build failures in the case <vc/.../chromeos.h> is removed. Change-Id: Ie45066f39cd6fb92cca697a6bd5bc8bb8c60b4e7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55506 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-06-16mb/google/zork: enable UART0 in devicetreeFelix Held
This a mainly a preparation for adding the MMIO UART devices to the chipset devicetree. TEST=none Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I533e4a909fdeb1614dbc5df015440b9df5d83233 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55544 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-06-16soc/amd/picasso: introduce and use devicetree aliases for I2C2&I2C3Felix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I06102f4fcc3bf9de332c71a52c632241b95cde19 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55543 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-06-16broadwell boards: Use Haswell hostbridge.aslAngel Pons
Use hostbridge.asl from Haswell instead of Broadwell. Both files are equivalent. Then, drop the now-unused hostbridge.asl from Broadwell. Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 remains identical. Change-Id: I87d51727b75a9c59e2f5f3ba8d48c575ce93c78c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55484 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-06-14mb/google/volteer/var/collis: change GPP_B2 to PLTRSTNick Vaccaro
Change GPP_B2 (EN_PP3300_SSD) to PLTRST to avoid S3 resume hang. BUG=b:174776411 BRANCH=none TEST=none Change-Id: I18ee085cde0570ef278ea3869be30471ed04e3db Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55446 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-06-14mb/google/volteer/var/eldrid: change GPP_B2 to PLTRSTNick Vaccaro
Change GPP_B2 (EN_PP3300_SSD) to PLTRST to avoid S3 resume hang. BUG=b:174776411 BRANCH=none TEST=none Change-Id: Icfde6b57ff5f6e49ff7804eff6e6a5819bb784bc Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55445 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-06-14mb/google/volteer/var/volet: change GPP_B2 to PLTRSTNick Vaccaro
Change GPP_B2 (EN_PP3300_SSD) to PLTRST to avoid S3 resume hang. BUG=b:174776411 BRANCH=none TEST=none Change-Id: Ib0858afa1b5dc9de9db87485d3e0bf6032416746 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55444 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-06-14mb/google/volteer/var/elemi: change GPP_B2 to PLTRSTNick Vaccaro
Change GPP_B2 (EN_PP3300_SSD) to PLTRST to avoid S3 resume hang. BUG=b:174776411 BRANCH=none TEST=none Change-Id: I19b5e1c4beebbc1ebd3d2e30bc22e8c890aaf78f Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55443 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-06-14mb/google/volteer/var/copano: change GPP_B2 to PLTRSTNick Vaccaro
Change GPP_B2 (EN_PP3300_SSD) to PLTRST to avoid S3 resume hang. BUG=b:174776411 BRANCH=none TEST=none Change-Id: I7d35c284b88b8828d31fff9ccafeb914542b0837 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55442 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-06-14mb/google/volteer/var/voema: change GPP_B2 to PLTRSTNick Vaccaro
Change GPP_B2 (EN_PP3300_SSD) to PLTRST to avoid S3 resume hang. Add GPP_B2 to the early_gpio_table. BUG=b:174776411 BRANCH=none TEST=none Change-Id: If8c253236051f6d170fab444cfc166e5d2ed7bc2 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55441 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-06-14mb/google/volteer/var/drobit: change GPP_B2 to PLTRSTNick Vaccaro
Change GPP_B2 (EN_PP3300_SSD) to PLTRST to avoid S3 resume hang. Add GPP_B2 to the early_gpio_table. BUG=b:174776411 BRANCH=none TEST=none Change-Id: I49f7b1b69c3c3ab5593c7230d8f631a3b54c9c9d Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55440 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-06-14mb/google/volteer/var/terrador: change GPP_B2 to PLTRSTNick Vaccaro
Change GPP_B2 (EN_PP3300_SSD) to PLTRST to avoid S3 resume hang. Add GPP_B2 to the early_gpio_table. BUG=b:174776411 BRANCH=none TEST=none Change-Id: I1214246bb1318869e9b6f57cb6a7e74bbe6574cc Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55439 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-06-14mb/google/volteer/var/delbin: change GPP_B2 to PLTRSTNick Vaccaro
Change GPP_B2 (EN_PP3300_SSD) to PLTRST to avoid S3 resume hang. Add GPP_B2 to the early_gpio_table. BUG=b:174776411 BRANCH=none TEST=none Change-Id: Ifb6b5b14cec9e6f7c68aa9b01621fdb21c885552 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55438 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-06-14mb/google/volteer/var/volteer2: change GPP_B2 to PLTRSTNick Vaccaro
Change GPP_B2 (EN_PP3300_SSD) to PLTRST to avoid S3 resume hang. Add GPP_B2 to the early_gpio_table. BUG=b:174776411 BRANCH=none TEST=none Change-Id: I07be950096aef42dbf4f067134e56c5849dfa02d Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55433 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-06-14mb/google/volteer/var/voxel: change GPP_B2 to PLTRSTNick Vaccaro
Change GPP_B2 (EN_PP3300_SSD) to PLTRST to avoid S3 resume hang. BUG=b:174776411 BRANCH=none TEST=none Change-Id: Ia7db2d0a1fff98d1cfb8e7e979c0a81b9f3d0e9e Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55432 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-06-14mb/google/volteer/var/baseboard: change GPP_A11 to PLTRSTNick Vaccaro
The system will hang when resuming from S3 if the SSD reset gpio is not reset early enough. Change GPP_A11 in baseboard to PLTRST to avoid an S3 resume hang. BUG=b:174776411 BRANCH=none TEST=none Change-Id: Ia78d813cb6bc689b07e8d8ead1ade6e77f925ce1 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55431 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-06-14soc/intel/broadwell/pch: Replace ACPI device NVSAngel Pons
The same functionality can be provided through a runtime-generated SSDT. The remaining parts of device NVS are removed in a follow-up. Since the SSDTs are only loaded after the DSDT (if loaded at all), using SSDT-provided objects outside method bodies is not possible: the objects are not yet in OSPM's ACPI namespace, which causes in ACPI errors. Owing to this, the operation regions used by the _PS0 and _PS3 methods need to be moved into the SSDT, as they depend on the SSDT-provided BAR1 values. Tested on out-of-tree Compal LA-A992P, generated SSDT disassembles with no errors and contains expected values. Linux does not complain either. Change-Id: I89fb658fbb10a8769ebea2e6535c45cd7c212d06 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52520 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-06-14mb/google/volteer/var/voema: Reduce stop delay time to 150ms for ELAN TSDavid Wu
Set register "generic.stop_delay_ms" to 150 to reduce power resume time. BUG=b:185308246 TEST=tested on voema Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Idd90191ee7ecbbc544121dc0b93101bea64f0e5f Reviewed-on: https://review.coreboot.org/c/coreboot/+/54275 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-14mb/google/volteer/variants/elemi: Include SPD for MT40A512M16TB-062E:RWisley Chen
Add SPD support to elemi for MT40A512M16TB-062E:R BUG=b:190020997 TEST=FW_NAME=elemi emerge-volteer coreboot chromeos-bootimage Change-Id: I548ea2ec01dd0a43442a691cf870c2bc1b58bc74 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55165 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2021-06-14mb/google/volteer/var/trondo: Update gpio settingsDavid Wu
This is the same settings as voxel. BUG=None TEST=FW_NAME=trondo emerge-volteer coreboot chromeos-bootimage Verify that the image-trondo.bin is generated successfully. Change-Id: I04df68ce1683fa32195df1a93f5bde2e3efe6090 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54274 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2021-06-14mb/google/brya: Create gimble variantMark Hsieh
Create the gimble variant of the brya0 reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:190334274 BRANCH=None TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_GIMBLE Change-Id: If425571d95b3b20910f890428fb5726ebad2fdf4 Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55300 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-14mb/google/hatch: Create scout variantJeff Chase
Create the scout variant of the puff reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:187080143 BRANCH=None TEST=util/abuild/abuild -p none -t google/hatch -x -a make sure the build includes GOOGLE_SCOUT Signed-off-by: Jeff Chase <jnchase@google.com> Change-Id: I3be9d2d30821c2c9132ed94c9faf1f33b62bbc7e Reviewed-on: https://review.coreboot.org/c/coreboot/+/55173 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2021-06-14mb/google/guybrush: Update memory configurationIvy Jian
Regenerate SPD for MT53E1G32D2NP-046 WT:B with correct value of ranks. BUG=b:190692797 TEST=Build and boot to OS Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Change-Id: Icee095c7114f1d6dd960f2134db3816b367bf987 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55384 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-06-13mb/google/cherry: get SKU ID from EC (CBI)Rex-BC Chen
The SKU ID for Cherry is retrieved via CBI interface. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Icefa016c2e5f68bd194f76d2252856835c65b8e8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55383 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2021-06-12mainboard/google/brya: Enable software syncBoris Mittelberg
This change removes the GBB flag that disables SW sync BUG:184229267 TEST:manually running chromeos-firmwareupdate Signed-off-by: Boris Mittelberg <bmbm@google.com> Change-Id: Ie8b759a0cdb0c3a0a6458f64c16216459f076e27 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55400 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-12mb/google/volteer/var/volet: remove USB4_GEN3 configuration for volet.Sheng-Liang Pan
volet don't support usb4, remove it to prevent USBC(P0) issue. BUG=b:189740531 TEST=build and verify USB(P0) disaply out normal Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: Ia78c7cee76ec2e3a5334ad8805a0d45616aade93 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55344 Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-11mb/google/guybrush: Add EC_HOST_EVENT_HANG_DETECT to wake maskRob Barnes
Add EC_HOST_EVENT_HANG_DETECT to S3/S5/S0ix wake mask. This event is sent when the EC detects the AP didn't fully enter a sleep state. BUG=b:186571086 TEST=Trigger hang detect while AP is in S0ix, AP wakes from S0ix Change-Id: I09ccf609fc453c19b4fb1ddaa5a0c86d7a85aad1 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55365 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-06-11mb/google/brya: Update PMC Descriptor for Alder lake A0(0x906a0) siliconSridhar Siricilla
The patch updates PMC Descriptor which is part of Descriptor Region if system equipped with Alder lake A0 silicon. This change allows to use unified Descriptor Region for Alder lake A0(CPU ID:0x906a0) and B0 (CPUD ID:0x906a1) silicons. BUG=B:187431859 TEST=Verified PMC Descriptor getting modified for Alder lake B0 silicon if not updated. coreboot logs appear as below with this patch: On First boot after flashing the image: coreboot-coreboot-unknown.9999.4589c0f Wed Jun 9 18:23:43 UTC 2021 bootblock starting (log level: 8)... CPU: Genuine Intel(R) 0000 CPU: ID 906a0, Alderlake Platform, ucode: 0000001a .. FMAP: Found "FLASH" version 1.1 at 0x1804000. FMAP: base = 0x0 size = 0x2000000 #areas = 32 FMAP: area SI_DESC found @ 0 (4096 bytes) SF: Detected 00 0000 with sector size 0x1000, total 0x2000000 Erasing flash addr 0 + 4 KiB Update of PMC Descriptor successful, trigger GLOBAL RESET Next boot after GLOBAL RESET: coreboot-coreboot-unknown.9999.4589c0f Wed Jun 9 18:23:43 UTC 2021 bootblock starting (log level: 8)... .. FMAP: area SI_DESC found @ 0 (4096 bytes) SF: Detected 00 0000 with sector size 0x1000, total 0x2000000 Update of PMC Descriptor is not required! VBOOT: Loading verstage. .. CBFS: Found 'fallback/verstage' @0x2264c0 size 0x16b08 in mcache @0xfef84d38 Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I6d9a2ce0f0b3e386eefa1962ce706b58f31a8576 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55254 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-06-10mb/google/guybrush: Move variant_has_fpmcu() after eSPI initMartin Roth
Currently variant_has_fpmcu() is called very early in bootblock, before eSPI is initialized. When checking CBI for its presence, that causes an error and nothing else can be read from CBI in bootblock. Moving it slightly later in bootblock doesn't hurt anything from a timing standpoint, and allows CBI to be read. BUG=None TEST=See CBI get read and the FPMCU field read correctly. Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I6de44119e92c8820b266f9f07287706c7d4eb505 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54740 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-06-10soc/intel/tigerlake: Move MAX_CPUS to KconfigAndy Pont
Most of the Kconfig files for Intel SOC devices define the MAX_CPUS value within src/soc/intel/*/Kconfig. Move the definition there for Tiger Lake and remove from the mainboard Kconfig files. Signed-off-by: Andy Pont <andy.pont@sdcsystems.com> Change-Id: If145b9eb5d99821f4ce513118e4417d05f821ef5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55307 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-06-10mb/google/dedede/var/pirika: Support Realtek audio codec ALC5682I and ↵Alex1 Kao
speaker L/R Add Realtek audio codec ALC5682I and speaker L/R the same way as in waddledee BUG=b:188446060 BRANCH=dedede TEST=Boot to check ALC5682I and speaker L/R are functional Change-Id: I8173ffbfb1a8f18978a5e35c69972d4a6d8cb04a Signed-off-by: Alex1 Kao <alex1_kao@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54529 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Kirk Wang <kirk_wang@pegatron.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-10mb/google/brya: Add variant GPIO override functionsTim Wawrzynczak
Provide functions to allow for variants to override only a few pads from the baseboard table. BUG=b:189362981 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I3ae6c11ca8614d523f3402f1c1abb7c82124e473 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55324 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-06-09mb/google/dedede/var/drawcia: Add low_power_probe config for camera devicesVarshit Pandya
Add low_power_probe config to camera devices so that driver skips initial probe during kernel boot and hence prevents privacy LED blink. BUG=b:178060668 TEST=Build and boot to OS on Drawcia. Ensure no blink on privacy LED. Signed-off-by: Varshit Pandya <varshit.b.pandya@intel.com> Change-Id: I00dfe2ce0b57ff3eaa258204f49e79a280754dcf Reviewed-on: https://review.coreboot.org/c/coreboot/+/52190 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-09mb/google/dedede/var/storo: Update gpio settingTao Xia
Correct GPIO settings as below reason: 1. GPP_D19/GPP_D20/GPP_D21 not being used but set to NF. 2. GPP_B7 should configure as WWAN SAR detect ODL, but set to GPI BUG=b:188956448 BRANCH=dedede TEST=The LTE DPR pin can be pulled down normally when someone get close to the P-sensor antenna. Signed-off-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com> Change-Id: Idc214fcd9c4631368a71f4d59bb644df739982ab Reviewed-on: https://review.coreboot.org/c/coreboot/+/55175 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-06-09mb/google/dedede/var/blipper: Update DPTF parametersTao Xia
Update DPTF parameters from internal thermal team. BUG=b:181189479 BRANCH=dedede TEST=emerge-dedede coreboot Signed-off-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com> Change-Id: I379c0ea79a7c27bdd81ed41a54135f7284fb6412 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54715 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-06-08google/trogdor: Add new variant PazquelYunlong Jia
This patch adds a new variant called Pazquel that is identical to Lazor for now. BUG=b:187232137 TEST=make Signed-off-by: Yunlong Jia <yunlong.jia@ecs.corp-partner.google.com> Change-Id: Ib531ea5df19fe91e619f23baada73842554538ad Reviewed-on: https://review.coreboot.org/c/coreboot/+/55268 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-06-08mb/google/guybrush: Enable RTD3 support for NVMeRaul E Rangel
This will tell the kernel to ignore PCI ASPM when suspending the device and instead place the device into D3. We don't actually have a pin to control power to the NVMe so we leave it in D3Hot. I'm not sure if `PCI_RST#` is working correctly on S0i3 suspend/resume. If it's not acting as expected we can add the reset GPIO and have the OS do it. BUG=b:184617186 TEST=Run suspend_stress_test on guybrush for 10 cycles Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I29539ac120a9f1b7c1bfeaca745cfc82acfa461a Reviewed-on: https://review.coreboot.org/c/coreboot/+/54967 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-07soc/intel/adl: Add SKU specific power limits supportSumeet Pawnikar
Power limits (PL1 and PL2) depend on the specific SKU of the CPU. By expanding the SoC chip config power_limits_config member to an array indexed by ADL_*_POWER_LIMITS_*_CORE macros, the appropriate power limits are applied. Using this the correct set of power limits are being selected from the array based on system agent PCI ID. Based on this, chipset.cb file contains the set of power limits being used by varieties of ADL boards. These power limit values are as per document 619501. BUG=None BRANCH=None TEST=Built and verified the following console output on below boards On adlrvp (482): CPU PL1 = 28 Watts CPU PL2 = 64 Watts On adlrvp (682): CPU PL1 = 45 Watts CPU PL2 = 115 Watts On brya (282): CPU PL1 = 15 Watts CPU PL2 = 55 Watts Change-Id: Ic1676e2b4d611cdc85e770f131d5b6d5ecd180be Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54676 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Selma Bensaid <selma.bensaid@intel.com>
2021-06-07mb/google/brya: Add EC_HOST_EVENT_USB_MUXJohn Zhao
This changes adds the EC_HOST_EVENT_USB_MUX to be dark resume source. BUG=None TEST=Build coreboot image successfully. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I6f4dcbc60a6cb131f28de205bd9ef436f2b508eb Reviewed-on: https://review.coreboot.org/c/coreboot/+/55126 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-07sb/intel/bd82x6x: Drop P_LVLx support in FADTAngel Pons
IO MWAIT redirection is not enabled, and C-states are reported using the _CST ACPI object, which overrides the P_LVLx values. Change-Id: I737bd58bcda3e7c5f6591e4c2309530ff035e2c8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55218 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-06-07mb/google/dedede/var/kracko: Add P-sensor supportTony Huang
Configure GPIO D22/D23/E11. Add P-sensor to device tree, these registers are draft version. BUG=b:178092096 BRANCH=dedede TEST=built firmware and dmesg shows STH9324 initial success. Change-Id: I2c8feedd6efc1a471304322a17480c836e22349e Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55133 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-06-07sb/intel/bd82x6x: Use array for PCIe ASPM overridesAngel Pons
Using an array reduces the amount of boilerplate code. Change-Id: Ic6a48a01d3b96e69273dc28bdb6699ce7c0931b2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55246 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-07soc/amd/cezanne: Configure I2C Pad RX Select through devicetreeKarthikeyan Ramasubramanian
Some of the I2C buses are required to operate at different voltage level compared to other I2C buses eg. I2C bus to Google Security Chip (GSC) should be at 1.8V level. By default, all the I2C buses are initialized to operate at 3.3 V. Add support to configure I2C pad RX select through devicetree and update the concerned devicetree. BUG=b:188538373 TEST=Build and boot to OS in Guybrush. Ensure that the communication with GSC is fine. Build Majolica mainboard. Change-Id: I595a64736fdac0274abffb68c5e521302275b845 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55149 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-06-07mb/google/guybrush/var/guybrush: Update GPIO configurationKarthikeyan Ramasubramanian
Some of the GPIOs are either re-purposed for different use-cases or are unused in upcoming board phase (board version 2). Update the GPIO configuration accordingly. Here are the GPIOs that are updated: GPIO Board Id 1 Board Id 2 ============================================= GPIO31 TP183 EN_SPKR GPIO69 EN_SPKR SD_AUX_REST_L GPIO70 SD_AUX_RESET_L Unused TP27 GPIO74 RAM_ID_CHAN_SEL Unused TP49 BUG=b:189327557, b:188542649, b:188542497 TEST=Build Guybrush mainboard. Verify Audio is audible and SD card is detected fine in Board ID 1. Change-Id: I31523b3e03d2b59577f33eae548747834cfc98aa Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55148 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-06-07psp_verstage: initialize i2c in soc_initKangheui Won
GSC is connected with AP via i2c bus so we need to enable i2c in psp_verstage. Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: I5f7b73be67a692ea7de31ae53bd111d0e4b6998c Reviewed-on: https://review.coreboot.org/c/coreboot/+/55136 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-07mb/google/dedede/var/sasukette: Update DPTF parametersTao Xia
Update DPTF parameters from internal thermal team. BUG=b:180875580 BRANCH=dedede TEST=emerge-dedede coreboot Signed-off-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com> Change-Id: Id18a38cddbcacbafbe2c54d94dbda5e00de02b3b Reviewed-on: https://review.coreboot.org/c/coreboot/+/55208 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Evan Green <evgreen@chromium.org>
2021-06-07bd82x6x boards: Drop redundant `c2_latency`Angel Pons
If unspecified, chipset code already uses 101, and 0x65 == 101. Change-Id: I524ca492fa577003df23017756f74a455582132f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55212 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-06-05mb/google/cherry: Get RAM code from ADCRex-BC Chen
On Chromebooks the RAM code is implemented by the resistor straps that we can read and decode from ADC. For Cherry the RAM code can be read from ADC channel 2 and 3. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I4f28bc1c567cb886bd90d930219981a6206b9bb9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55156 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-06-05mb/google/cherry: Initialize SPMRex-BC Chen
This patch adds support for SPM. This adds 43ms to the boot time. TEST=program counter of SPM is correct value after booting up. Signed-off-by: Dawei Chien <dawei.chien@mediatek.com> Signed-off-by: Edward-JW Yang <edward-jw.yang@mediatek.corp-partner.google.com> Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I5f17f6d51fc9ad2d23c71c3c5cd29fdc777dc071 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55154 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-04mb/google/brya: Remove I2C4 usage in devicetree.cbSubrata Banik
I2C4 is not used pn Brya hence make below changes: 1. Disable it in SerialIoI2cMode. 2. Remove I2C4 config in common_soc_config. TEST=Make sure FSP is not programming I2C4. Change-Id: I94c72b7fac9d8a001913b5faa2c0c8a3e8b701e9 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55170 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-06-04mb/google/dedede/var/cret: Add new Goodix touchscreenDtrain Hsu
Add Goodix GT7996F touchscreen into devicetree for cret. BUG=b:180547935, b:188501391 BRANCH=dedede TEST=Built cret firmware and verified touchscreen function. Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: I2a6f7c1e9900492937202c0bc6595674f1e79e5b Reviewed-on: https://review.coreboot.org/c/coreboot/+/54872 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-06-04mb/google/brya: Add firmware configuration probing for audioSugnan Prabhu S
For all of the audio devices in overridetree.cb add the probe matches that will determine if the device should be enabled or not based on the selected audio daughter board type. AUDIO=MAX98357_ALC5682I_I2S: enable max98357, dmic1 and alc5682i AUDIO=MAX98373_ALC5682_SNDW: enable max98373, dmic2 and alc5682 BUG=b:188696010 TEST=test different audio devices based on fw_config value: > AUDIO=UNKNOWN ectool cbi set 6 0x00000000 4 2 > AUDIO=MAX98357_ALC5682I_I2S ectool cbi set 6 0x00000100 4 2 > AUDIO=MAX98373_ALC5682_SNDW ectool cbi set 6 0x00000200 4 2 Change-Id: I6f159442516830f9d304d78c83f070e4fcff4a37 Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54716 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-06-04mb/google/guybrush/var/guybrush: Reconfigure left speaker amplifierKarthikeyan Ramasubramanian
In order to resolve the I2C address conflict with another peripheral in the upcoming hardware build, left speaker amplifier I2C address is reconfigured. BUG=b:188539052 TEST=Build Guybrush mainboard. On Guybrush board ID 1, all the 3 speaker amplifiers are added to the ACPI table. \_SB.I2C2.D028: Realtek SPK AMP L at I2C: 03:28 \_SB.I2C2.D029: Realtek SPK AMP R at I2C: 03:29 \_SB.I2C2.D02A: Realtek SPK AMP L1 at I2C: 03:2a At the OS side, the concerned speaker amplifiers are probed and enumerated. localhost ~ # i2cdetect -y -r 2 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- UU -- -- -- -- -- 20: -- -- -- -- -- -- -- -- UU UU -- -- -- -- -- -- 30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 70: -- -- -- -- -- -- -- -- Change-Id: I69a7e7dd65a459c2e5629ada1dea1f1660dd9990 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55028 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-06-04mb/google/dedede/var/blipper: Configure I2C times for touchpad/touchpanel/codecTao Xia
Configure I2C rise/fall time in device tree to ensure I2C CLK runs accurately at I2C_SPEED_FAST (<400 kHz). Measured I2C frequency changes are just as below after tuning: touchpad: 434kHz ---> 391kHz touchpanel: 439kHz ---> 382kHz audio codec RT5682: 445kHz ---> 385kHz BUG=b:187555396 BRANCH=dedede TEST=Build and check after tuning I2C clock is under 400 kHz Signed-off-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com> Change-Id: I8438e37be49f8a74f53fd8460110dac1a3f06993 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54249 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-06-04mb/google/brya/brya0: Fix irq and CS lines for FPMCUTim Wawrzynczak
The entries in the ACPI tables for the fingerprint module's SPI configuration were incorrect. 1) The GPIO is routed to IOAPIC (and SCI), therefore in ACPI, it must be described by Interrupt(), not GpioInt() 2) The chip-select signal was selected as 1, not 0 `device spi 0/1 on` BUG=b:181635081 TEST=verified in kernel logs: localhost # ~ dmesg|egrep 'cros-ec-dev|cros-ec-spi' [ 4.569412] cros-ec-dev cros-ec-dev.1.auto: CrOS Fingerprint MCU detected [ 4.575303] cros-ec-spi spi-PRP0001:00: Chrome EC device registered Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I9ef6c99f011969fc444e0c12b806529cb82bba3d Reviewed-on: https://review.coreboot.org/c/coreboot/+/55147 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-04intel/common/block: Move mainboard api to tcss common blockDeepti Deshatty
As per the comments in CB:54090 mainboard api mainboard_tcss_get_port_info() is simplified and moved to tcss common block code. Signed-off-by: Deepti Deshatty <deepti.deshatty@intel.com> Change-Id: I7894363df4862f7cfe733d93e6160677fb8a9e31 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54733 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-06-04mb/google/dedede/var/cret: Add new Elan touchscreenDtrain Hsu
Add Elan eKTH7D18 touchscreen into devicetree for cret. BUG=b:180547935, b:187484857 BRANCH=dedede TEST=Built cret firmware and verified touchscreen function. Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: Iab87ddfc7b46420439efa3e7e55c88ad4c27155d Reviewed-on: https://review.coreboot.org/c/coreboot/+/54868 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-06-04mb/google/dedede/var/storo: Modify I2C times for touchpadZanxi Chen
Configure I2C rise/fall time in device tree to ensure I2C CLK runs accurately (380<frequency<400 kHz). Measured touchpad I2C frequency is 394 kHz BUG=b:189740533 BRANCH=dedede TEST=Build bios and make sure frequency meets specification. Change-Id: Ibc0504a5be6fe9237b8b30783c659a761d10561a Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55109 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-06-03mb/google/dedede/var/sasukette: Modify the touch pad I2C addressTao Xia
There are two touch pads that Sasukette used have the same I2C address. It will show "/dev/input/event4: SPPT2600:00 06CB:CE9D Touchpad" when the Synaptics touch pad is connected after running evtest under VT2. BUG=b:189520603 BRANCH=dedede TEST=It will show "/dev/input/event4: SYNA0A00:00 06CB:CE9D Touchpad" when the Synaptics touch pad is connected after running evtest under VT2. Signed-off-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com> Change-Id: If0bd80baa27dfeb7bcb43f0ca4b02e1228e372a6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55035 Reviewed-by: zanxi chen <chenzanxi@huaqin.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-03mb/google/brya: Create primus variantScott Chao
Create the primus variant of the brya0 reference board by copying the template files to a new directory named for the variant. (Auto-generated by create_coreboot_variant.sh version 4.5.0) BUG=b:188272162 BRANCH=None TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_PRIMUS Signed-off-by: Scott Chao <scott_chao@wistron.corp-partner.google.com> Change-Id: I26787f296793b281b7f1ee1a7d240006163c6015 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55132 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-06-03mb/google/brya: Add support for 2 new DRAM partsAmanda Huang
1) Hynix H9HCNNNCPMMLXR-NEE 2) Micron MT53E1G32D2NP-046 WT:B BUG=b:186616388, b:181736400 Change-Id: I56bfe8aa4f8d8aab2011fa8d17b3b2c8659658e3 Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54951 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-03mb/google/brya: move MIPI camera setting into overridetreeScott Chao
In order to support no MIPI camera variant, move related configuration into variant folder. BUG=b:188272162 BRANCH=none TEST=build no MIPI camera variant without error Signed-off-by: Scott Chao <scott_chao@wistron.corp-partner.google.com> Change-Id: I4e64d078a8e39732ad29443c3b09ca008a7e902f Reviewed-on: https://review.coreboot.org/c/coreboot/+/55134 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-06-02mb/google/volteer/var/volet: Update gpio and devicetree settingsSheng-Liang Pan
Based on schematic and gpio table of volet, update gpio and devicetree settings for volet Proto. BUG=b:186334008 TEST=FW_NAME=volet emerge-volteer coreboot chromeos-bootimage Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: Ia0e9557e01ce1e7a49a3dddf6da3e4a29587a8b7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55113 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-02mb/google/volteer/var/volet: add volet memory configuration.Sheng-Liang Pan
volet use same memory configuration from Voxel, copy voxel setting to volet. BUG=b:186334008 TEST=FW_NAME=volet emerge-volteer coreboot chromeos-bootimage Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: I7e65b18f2ddae3d1ce02d9006153269697188f61 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55096 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-01mb/google/brya: Enable WFCMeera Ravindranath
1. Add 1 port and 1 endpoint 2. Add support for OVTI8856 WFC is on I2C0 BUG=None BRANCH=None TEST=Build and boot brya Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com> Change-Id: Ic5e9c28f255bdf86a68ce80a4f853be4e7c7ccfe Reviewed-on: https://review.coreboot.org/c/coreboot/+/52013 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-06-01mainboards using soc/amd/picasso: use aliases for remaining PCIe devicesFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Id2bdce5871f57e9edb17f89cba61b5c5ae018566 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55104 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-06-01mainboards using soc/amd/picasso: use aliases for PCIe devices on bus 0Felix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia6199c70163d32467abe5ba5da55c73ff62ba10f Reviewed-on: https://review.coreboot.org/c/coreboot/+/55103 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-06-01soc/amd/picasso: introduce and use chipset device treeFelix Held
The chipset devicetree only has the essential PCIe devices enabled that are needed for the SoC code to work. It also defines aliases for all PCIe devices that can be used to reference the devices in the mainboard- specific devicetrees and devicetree overrides. To make the change easier to review that part will be done in a follow-up patch. Despite missing in the PPR, device pci 18.7 exists on Picasso. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I6b7c3fd32579a23539594672593a243172c161c7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50626 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-05-28mb/google/volteer/var/collis: Update DPTF parametersFrankChu
Update the first version DPTF parameters received from the thermal team. BUG=b:188936764 TEST=emerge-volteer coreboot chromeos-bootimage Cq-Depend: chrome-internal:3851737 Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com> Change-Id: Id14b1d0bdd48c65eafbdd2e80b4611c86781be00 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54858 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-28mb/google/dedede: Update Storo setting for PEN detection.Zanxi Chen
Update devicetree and gpio driving of storo that enable stylus Updates the GPIO configuration for GPP_C12 to PAD_CFG_GPI_GPIO_DRIVER and device tree entry for PENH device to use WAKEUP_ROUTE_GPIO_IRQ. BUG=b:188519508,b:188365033 BRANCH=dedede TEST=build bios and the pen behavior can be detected. Change-Id: I2ffc969569b3ca29ba76326140f958a9707199f7 Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54762 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-28mainboard/google/brya: Add S3/S0ix wake events AC connect/disconnectmadhusudanarao amara
Enabling AC connect/disconnect wake events in brya to meet Chrome OS wake requirements. These changes are similar to Volteer and Shadowmountain. BUG=none BRANCH=None TEST=manual tested DUT wakes for AC connect/disconnect in S0ix Change-Id: I14b3efd429e3aa701af534f150baf35fcdeb9f35 Signed-off-by: madhusudanarao amara <madhusudanarao.amara@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54855 Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Sooraj Govindan <sooraj.govindan@intel.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-27tpm: Remove USER_TPMx options, make TPM1/TPM2 menuconfig visibleJulius Werner
We would like to have an easy way to completely disable TPM support on a board. For boards that don't pre-select a TPM protocol via the MAINBOARD_HAS_TPMx options, this is already possible with the USER_NO_TPM option. In order to make this available for all boards, this patch just removes the whole USER_TPMx option group and directly makes the TPM1 and TPM2 options visible to menuconfig. The MAINBOARD_HAS_TPMx options can still be used to select defaults and to prevent selection of a protocol that the TPM is known to not support, but the NO_TPM option always remains available. Also fix some mainboards that selected TPM2 directly, which they're not supposed to do (that's what MAINBOARD_HAS_TPM2 is for), and add a missing dependency to TPM_CR50 so it is set correctly for a NO_TPM scenario. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Ib0a73da3c42fa4e8deffecb53f29ee38cbb51a93 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54641 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Christian Walter <christian.walter@9elements.com>
2021-05-27mb/google/guybrush,mancomb: enable crypto coprocessor PCIe deviceFelix Held
This fixes the following error from the Linux kernel: ccp 0000:03:00.2: ioremap failed ccp 0000:03:00.2: initialization failed ccp: probe of 0000:03:00.2 failed with error -12 BUG=b:186575712,b:189202985 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I5cbc620001d3c21c538b62ab2811b6e07269feb2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54962 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-27Mancomb: Add firmware config CBI definitionsMartin Roth
The firmware config field in CBI lets us control initialization parameters based on the OEM design. BUG=b:188713024 TEST=Build Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I56ddc7218688919f20f41e0f143419c39d83849d Reviewed-on: https://review.coreboot.org/c/coreboot/+/54732 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-05-27soc/amd/picasso: add devicetree setting for PSPP policyFelix Held
Since the default for the corresponding UPD of the Picasso FSP is DXIO_PSPP_POWERSAVE and the devicetree default is DXIO_PSPP_PERFORMANCE, add a deviectree setting for each board that's using the Picasso SoC code to not change the setting for the existing boards. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I0008ebb0c0f339ed3bdf24ab95a20aa83d5be2c9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54934 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-05-27mb/google/mancomb: set PSPP policy to balancedFelix Held
Not sure which policy we should select here or if that should be done in the board-specific devicetree overrides instead of the baseboard. BUG=b:188793754 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I792d909ce75cb73571c9fec58c18f749ea3ae029 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54933 Reviewed-by: Matt Papageorge <matthewpapa07@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-27mb/google/guybrush: set PSPP policy to powersaveFelix Held
BUG=b:188793754 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I262c4c3ae90d8d12fdfe71a3620739070a444a55 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54931 Reviewed-by: Matt Papageorge <matthewpapa07@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-26src/mainboard/google/guybrush: update devicetree with USB settingsJulian Schroeder
All relevant USB phy settings can now be controlled via devicetree. The given values are the AMD default ones. For proper tuning procedure and values contact AMD. Signed-off-by: Julian Schroeder <julianmarcusschroeder@gmail.com> Change-Id: Ie8d08bde54f8c0cb8202ba111b9c7a9bd33fa03e Reviewed-on: https://review.coreboot.org/c/coreboot/+/54785 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-05-26mb/google/asurada: Allow payloads to enable USB VBUSYu-Ping Wu
Configure GPIO CAM_PDN5 (AP_XHCI_INIT_DONE) as output, so that payloads (for example depthcharge) can assert it to notify EC to enable USB VBUS. BUG=b:187149602 TEST=emerge-asurada coreboot BRANCH=asurada Change-Id: I3bf63f91b8057e35be2780024a8b398c3044729b Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54902 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-26mb/google/dedede: add haboki variantWisley Chen
haboki/habokay is the same design as drawlat/drawcia, and differs only in replacing Cr50 with discrete TPM. BUG=b:187094464 TEST=FW_NAME=haboki emerge-keeby coreboot Cq-Depend: chrome-internal:3850094 Change-Id: Id866927b7041c5bf1c73fb4f0c03798eb61efa79 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54755 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-26mb/google/cherry: Support audioTrevor Wu
Add GPIO "beep enable" for switching on and off. Signed-off-by: Trevor Wu <trevor.wu@mediatek.com> Change-Id: Iddb781e30fa90f05767cceeb83e623432540dcc0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54739 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-05-25mb/google/dedede/var/cret: Generate new SPD ID for new memoryDtrain Hsu
Add new memory MT53E512M32D1NP-046 WT:B in the mem_parts_used.txt and generate the SPD ID for the parts. BUG=b:183057749 BRANCH=dedede TEST=Build the cret board. Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: Ib797af858e8f7ea275291e552102db74f4724aad Reviewed-on: https://review.coreboot.org/c/coreboot/+/54747 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-25mb/google/guybrush: Add Goodix touchscreenIvy Jian
Add Goodix touchscreen according to the Programming Guide Rev.0.7 BUG=b:188872893 TEST=build and boot into OS. check dmesg trying to add GDIX0000:00 device. Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Change-Id: I38c9bbf6e1c1531bf3524552db58c0bf183acbb4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54760 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-05-24mb/google/puff/var/dooly: Update CPU PSV to 85 degrees.Tony Huang
BUG=b:189053502 BRANCH=puff TEST=build image and verified by thermal team. Change-Id: Ic2337b9eabef158633c5e6dfa935ed5c8d3d76d1 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54718 Reviewed-by: Sam McNally <sammc@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-24Revert "mb/google/brya/brya0: Manually probe fw_config for DB_LTE"Tim Wawrzynczak
This reverts commit 2f8a7046bb120d96022ada1e74545f859f97521f. Reason for revert: CB:54752 makes this unnecessary Change-Id: I3ad0bcafe50e3eafb9a106720c6c9ea5cb0efc4f Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54789 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-22mb/google/dedede/var/sasukette: Enable ELAN touchpadlizhi7
Add ELAN touchpad into devicetree for sasukette. BUG=b:188376649 BRANCH=dedede TEST=built sasukette firmware and verified touchpad function Signed-off-by: lizhi7 <lizhi7@huaqin.corp-partner.google.com> Change-Id: I898aeda936eb10ef4ead679a1c087060fad71a08 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54369 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-22mb/google/dedede/var/drawcia: Support Synaptics touchpadTony Huang
Drawper would use synaptics touchpad. BUG=b:184878424 TEST=emerge-dedede coreboot and check touchpad function work. Change-Id: I2d2c205e19d8e3472e0fa7ca20fd38e381ac0de0 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54756 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-05-22mb/google/mancomb: Update AMD I2S Machine DriverIvy Jian
Update ACPI HID to 10025682 for Machine driver probe BUG=b:187912480 TEST=Build and boot to OS in Mancomb. Ensure that the sound card probed. Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Change-Id: I5dc87c7a8fb876adc26165655f8f2d4157aa68c9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54749 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-21mainboard/google/brya: Add SCI event EC_HOST_EVENT_USB_MUXmadhusudanarao amara
Send USB_MUX host event for the connect/disconnect type C devices. BUG=none BRANCH=None TEST=manual tested USB connect/disconnect Change-Id: I5a720e1f1ea42f200e0e4c98f42894e4b92c67f8 Signed-off-by: madhusudanarao amara <madhusudanarao.amara@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54725 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Sooraj Govindan <sooraj.govindan@intel.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-21mb/google/mancomb: Enable S0ixKarthikeyan Ramasubramanian
BUG=b:188446049 TEST=Build and boot to OS in mancomb. Ensure that the system can suspend and resume successfully. Ensure that the sleep state GPIOs are reflecting the state as expected. Change-Id: I43e86a07075fe66f89c2c5665adc209e985e4f04 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54687 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-05-21mb/google/dedede/var/drawcia: Support HDMI VBT for DrawperTony Huang
Drawper support LTE+HDMI, so use DB_PORTS_1A_HDMI_LTE to select HDMI VBT output for it. BUG=b:186393848 BRANCH=dedede TEST=Build and boot to OS check HDMI output works. Change-Id: Ibf34cce1e3cbfce8a71dce880c50f85db9295b1e Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54645 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-03 10:41:51 +0000