summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Collapse)Author
2021-01-25sb/intel/common: Change some SMI loggingKyösti Mälkki
Change-Id: Ief0c3d36e6de6e18b7f2613f043ac4d31a193f9d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49249 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-25cpu/x86/smm: Use common APMC loggingKyösti Mälkki
Unify the debug messages on raised SMIs. Change-Id: I34eeb41d929bfb18730ac821a63bde95ef9a0b3e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49248 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-25mb/google/dedede/var/drawcia: Add support to handle pen detectionWisley Chen
For board version 6 afterward, it will have external pull-up for GPP_C12, and remove internal pull-up. BUG=b:177618684 TEST=emerge-dedede coreboot, check evtest if SW_PEN_INSERTED event (value:1/0) when insert/eject pen, and eject pen to wake system from s0ix Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Change-Id: I503873afb48384168dcd8a822c7246655898356e Reviewed-on: https://review.coreboot.org/c/coreboot/+/49469 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Henry Sun <henrysun@google.com>
2021-01-25mb/google/kukui: Add panel for Katsuchenzanxi
Declare the following panel for Katsu: - BOE_TV105WUM_NW0 - STA_2081101QFH032011_53G BUG=b:176523929 TEST=build Katsu image passed BRANCH=kukui Change-Id: I59a02198bc0e13f2760677ae4ea3eb05eb883464 Signed-off-by: chenzanxi <chenzanxi@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49830 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-01-25mb/google/zork: adjust the eDP panel power sequenceChris Wang
set pwron_varybl_to_blon to 0x5, which means fw will delay 20ms between backlight on and vary backlight. BUG=b:171269338 BRANCH=zork TEST=Build; Verify the UPD was passed to system integrated table; measure the power on sequence on dalboz Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: I8af35eee7777a8e71b42f0c128795290b8c2c93e Reviewed-on: https://review.coreboot.org/c/coreboot/+/48865 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-01-25mb/google/zork: add eDP tuning parameter to fix the eDP noiseChris Wang
needs to adjust the eDP phy setting to fix the eDP noise for WWAN. DP_VS_LEVEL0_PREEMPH_LEVEL0, = 0x00 (0.4v 0db) swing 0, pre-emphasis 0) COMMON_MAR_DEEMPH_NOM = 0x004B COMMON_SELDEEMPH60 = 0x0 CMD_BUS_GLOBAL_FOR_TX_LANE0 = 0x80 BUG=b:171269338 BRANCH=none TEST=Build; Verify the UPD was passed to system integrated table Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: Ibe720e26d2257e05a989eaa1fd85d542005cf6a6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48734 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-25mb/google/auron: Convert to ASL 2.0 syntaxElyes HAOUAS
Built google/auron (Lulu) provides identical 'dsdt.dsl' files. Change-Id: I5728b220e88d4105fcf6e5cee78662bc80fa01d7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46169 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-25mb/google/dedede/var/boten: Add custom SAR values for BotenKevin Chang
Add Boten customized SAR table. BUG=b:175931508 BRANCH=dedede TEST=build and test no Boten Change-Id: I3b00f56c8b890979cbf2155c97a3a064d8b0ba1a Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49455 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-25mb/google/dedede/var/magolor: Enable EC keyboard backlightTim Chen
BUG=b:177288782 TEST=emerge-dedede coreboot chromeos-bootimage Change-Id: I98f741da4a22494883939c4efe7960c66e71c6a7 Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49340 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-25mb/google/dedede/var/sasuke: Enable bluetooth deviceSeunghwan Kim
"usb2_ports[7]" for internal bluetooth device was configured as 'USB2_PORT_EMPTY' mistakenly in previous patch, so we need to enable it again. BUG=None BRANCH=firmware-dedede-13606.B TEST=Built and verified BT device existence with lsusb Change-Id: Id2900152e23bbc2f454d064dc86a9e45e934ea0f Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49788 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-25trogdor: Explicitly initialize display pins in bootblockJulius Werner
This patch adds explicit initializations for the remaining named display (power) control GPIOs to the bootblock GPIO init code. These pins are usually mapped to pins that are already configured to pull-downs on power-on reset so this wasn't really required, but we have already moved them around so often that you never know when EEs might one day move them to a pin with a different power-on reset configuration, so it's better to be explicit. In one particular case, GPIO(67) (used by CoachZ rev1+ but not by anything else for the EN_PP3300_DX_EDP pin) is not actually a pull-down on boot, even though that is claimed by the datasheet. This is likely due to the fact that it can serve as the SPI_HOLD pin for the boot flash QSPI bus, so even though our board's boot flash doesn't really use that pin, it seems that the boot ROM still configures it as such. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I533baa962d2dfc87cfa510f442ed2e8912e0e5b0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49810 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: mturney mturney <mturney@codeaurora.org> Reviewed-by: Douglas Anderson <dianders@chromium.org>
2021-01-25mb/google/zork: Fix duplicate i2c_tunnel uidRaul E Rangel
This conflicts with the MSTH i2c_tunnel. BUG=b:175146875 BRANCH=zork TEST=Boot trembyle and inspect ACPI tables. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Iac04c7dc361d427f5ebb99644aa70bd0c7dbb918 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49812 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-01-25mb/google/volteer/eldrid: Use #define symbols for usb2_ports configTim Wawrzynczak
It's easier to understand what these symbolic names mean rather than using the constants; the static.c will will end up (indirectly) including `soc/usb.h` therefore the macros are in scope here. Change-Id: I5ef977a05a2522e177f32c99bfab74f9288ae869 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49488 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Chen <nick_xr_chen@wistron.corp-partner.google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-01-25mb/google/zork: update USB 2.0 controller Lane Parameter for gumbozKevin Chiu
From AMD USB phy specialist recommended that for DB port2 (type-A), port3 (type-C C1) the most effective corrections for the depressed eye are tx_rise_tune=0x0 tx_pre_emp_amp_tune=0x3 tx_fsls_tune = 0x3 BUG=b:173476380 BRANCH=zork TEST=1. emerge-zork coreboot 2. pass USB 2.0 SI eye diagram verification Change-Id: Ib31c5d55e30b958d3e552e8d0b4a160947444636 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49826 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-01-25mb/google/zork: update USB 2.0 controller Lane Parameter for dirinbozKevin Chiu
From AMD USB phy specialist recommended that for DB port2 (type-A), port3 (type-C C1) the most effective corrections for the depressed eye are: tx_rise_tune=0x0 tx_pre_emp_amp_tune=0x3 tx_fsls_tune = 0x3 BUG=b:165209698 BRANCH=zork TEST=1. emerge-zork coreboot 2. pass USB 2.0 SI eye diagram verification Change-Id: I80afd6bf1257b9a72d0d7651b48d243ebaf5de2f Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49824 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-01-25mb/google/kahlee: Deduplicate now-equivalent mainboard.cAngel Pons
The only difference is an additional include that is no longer needed. Change-Id: I0053d03aa4d05f5c0fa833d8634419b6667e38a7 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49832 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-25bayhub bh720: Configure VIH tuning via devicetreeAngel Pons
There's no need to repeat the same code on every board. Change-Id: I2e19decfe8609fa644e609673a56ee5109bafefa Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49831 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-25soc/intel/tgl and tgl mb/google,intel: Use the newly added meminit block driverFurquan Shaikh
This change uses the newly added meminit block driver and updates TGL SoC and mainboard code accordingly. TEST=Verified that UPDs are configured correctly with and without this change. Change-Id: I6d58cd6568b7bbe03c4e3011b2301209893e85a9 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49042 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-01-24mb/google/poppy: Convert to ASL 2.0 syntaxElyes HAOUAS
Generated 'build/dsdt.dsl' are identical. Change-Id: I4f8b77b3f196ca51346bb7932a40875c4dd5d2a6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46221 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24arch/x86: Use wildcard for mb/smihandler.cKyösti Mälkki
Change-Id: I306f8cd74af62c0cd30f445d20c47f774f122481 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49247 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-24broadwell: Flatten `mainboard_pre_raminit`Angel Pons
All Broadwell boards only use the `mainboard_pre_raminit` function to call `mainboard_fill_pei_data` and optionally `mainboard_fill_spd_data`. Move the declaration and weak definition of `mainboard_fill_spd_data` to platform code, replace the call to `mainboard_pre_raminit` in romstage.c with calls to `mainboard_fill_pei_data` and `mainboard_fill_spd_data`, and delete all other instances of `mainboard_pre_raminit` for Broadwell. Finally, delete now-empty romstage.c and spd.h files from mainboards. Change-Id: I3334b20bd7138bb753b996a137ff106e87c6e8a5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49776 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24broadwell: Clean up `mainboard_post_raminit`Angel Pons
Make it optional and change its signature. Change-Id: I4b5f3fb08e8954514ebf39e72c95aa62d66856d7 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49775 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24soc/intel/broadwell: Select CPU_INTEL_HASWELLAngel Pons
This allows us to drop many now-redundant Kconfig options. Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 remains identical. The default configuration file also remains identical, as expected. Change-Id: I20b0200550508679bf2533342ce918b221dcf81e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46953 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-01-24mb/google/auron: Use Haswell CPU codeAngel Pons
The VR config and S0ix options are now specified for the CPU chip. Change-Id: I75e405d41b4a0605e786fe761c92535e62d0cfce Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46945 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-24mb/google/jecht: Use Haswell CPU codeAngel Pons
Change-Id: I6c106b152bb2824e000232d23c2991898b2c4475 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46946 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-23mb/google/guybrush: Set FWM position to an upper addressZheng Bao
Setting other places causes build error. BUG=b:178241112 TEST=Build Change-Id: I85d5d44c458feed38d69f21f899d6b4380963ec7 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49825 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-01-23mb/google/auron: Drop `variant_romstage_entry`Angel Pons
Replace it with `mainboard_post_raminit`. Change-Id: I94636c775cee6c14317ecff36972e2d267d28c91 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-23mb/google/auron: Factor out SPD indexingAngel Pons
The code to read the SPD file and index it is not variant-specific. Change-Id: Iaee0a77934a45c65bf32dd0dba23cec654abc0b9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49773 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-23mb/google/auron: Factor out `mainboard_print_spd_info`Angel Pons
It is identical for all variants that have it. Change-Id: Iec3a5f036d9b760d1075059f2db1480b1c76273e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49772 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-23mb/google/auron: Merge two print statementsAngel Pons
They are part of the same line, so merge them. Change-Id: I969ce91f7a5f16a85750c140eaa444d7923b2014 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49771 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-23mb/google/auron: Drop `spd.h` from variantsAngel Pons
Factor out common DRAM SPD definitions and relocate SPD GPIO macros. Also factor out common function definition. Drop now-empty headers. Change-Id: Id05ba6c9cea27fbad5ee831f033d0de43717847e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49770 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-22mb/google/guybrush: Set the ROMSIZE as 16MZheng Bao
Change-Id: Iec8b40bd89c25cd2193aff8af45d0a09b07ad6a3 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49797 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-22mb/google/octopus: Garfour override VBT selectionTony Huang
Disable DRRS in VBT to solve panel flick issue SKU ID 49/51 will use vbt_garfour.bin 50/52 will use vbt_garfour_hdmi.bin BUG=b:177783330 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage check /run/debug/i915_drrs_status shows DRRS supported NO. Cq-Depend: chrome-internal:3534569 Change-Id: I5ebb66ec043a6b409dd5abbc31da417f50dbad5c Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49635 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-22mb/google/nightfury: Update RAM IDs usageSeunghwan Kim
Add support LP_16G_2133 SPD for nightfury. BUG=None BRANCH=firmware-hatch-12672.B TEST=emerge-hatch coreboot Change-Id: I3709431d8ecb600e25909f456eb0c95db3a3cde2 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49735 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-22mb/google/volteer/var/elemi: Update dptf parametersWisley Chen
Update DPTF setting from thermal team. BUG=b:177635236 BRANCH=volteer TEST=emerge-volteer coreboot chromeos-bootimage, and verified by thermal team. Change-Id: I87256b5c210ef12c09ef6dd948d80f406ae0500b Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49682 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2021-01-22mb/google/volteer/variants/eldrid: Configure USB2 port for Type-CNick Chen
1. USB2 ports 3 and 8 assigned to Type-C connector 2. USB2 port 3 keep USB2_PORT_SHORT setting and add .type_c flag BUG=b:177481076 TEST=tested on eldrid Signed-off-by: Nick Chen <nick_xr_chen@wistron.corp-partner.google.com> Change-Id: I42a39318a151bdf1f5aeb84bb1992be128cb4a4d Reviewed-on: https://review.coreboot.org/c/coreboot/+/49452 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-22mb/google/kukui: Enable MT8183_DRAM_EMCP for katsuSunway
The katsu project will be using eMCP board design. BUG=b:176271935 TEST=Boots on chromebook katsu successfully. BRANCH=kukui Signed-off-by: Sunway <lisunwei@huaqin.corp-partner.google.com> Change-Id: I733a9a79e2ea6501e26bf79bfce2b1934a295342 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48893 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/google/reef: do UART pad configuration at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I279956f30cbb6fb031cdfe6aaa09b644b6b7d3e7 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49427 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/google/reef: do LPC/eSPI pad configuration at board-levelMichael Niewöhner
Do LPC/eSPI pad configuration at board-level to match other platforms. This is done by adding missing pads to the bootblock gpio table. The soc code gets dropped in CB:49410. Change-Id: I95993b1bd4f1fd8b4ac7b21fb89ec4d196b0240a Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49412 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/google/hatch: do UART pad configuration at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I62ffbe36bd7b7675aa0f41a8c6e9214d04ad4ae5 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49428 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/google/glados: do UART pad configuration at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I6fedcebea3bb31d992bac1e3b21382fea93a8b82 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49429 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/google/octopus: do UART pad configuration at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: Ieeb738afd54e77ee853ee109009f611411aa0d4a Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49426 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/google/dedede: do UART pad config at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I5482f44b361925b7d2dbcbf1065c1be035c68b0b Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49424 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/google/drallion: do early pad configuration in early bootstageMichael Niewöhner
Do early pad configuration in early bootblock before console init, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I7dcf88d61c305f0598a0a79f8cfa46ef5009564b Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49419 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-01-21mb/google/octopus: do LPC/eSPI pad configuration at board-levelMichael Niewöhner
Do LPC/eSPI pad configuration at board-level to match other platforms by adding an appropriate early gpio table in the bootblock. The soc code gets dropped in CB:49410. Change-Id: Ie33bae481f430a1c4410a0a4e2b2a34a3e78adaa Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49411 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/google/volteer/variant/lindar: Enable SA GV settingKevin Chang
Allow MRC training in SA GV. BUG=b:177779469 BRANCH=firmware-volteer-13672.B TEST=Built and booted into OS. Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Change-Id: Idc9f634135b489450f53f8cd28d80649309d0f70 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49636 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-21mb/google/guybrush: Add default FMD file to the buildMathew King
BUG=b:175143925 TEST=builds; binary has correct layout Signed-off-by: Mathew King <mathewk@chromium.org> Change-Id: I4f3826c8ed0dfd7219eaa5f0cc285f1fe89a4e1d Reviewed-on: https://review.coreboot.org/c/coreboot/+/49491 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-01-21mb/google/volteer/variant/lindar: Configure USB2 port for type-cKevin Chang
Assigned USB2 port to type-c use. BUG=b:177483060 BRANCH=firmware-volteer-13672.B TEST=Built and booted into OS. Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Change-Id: I9bd820406124927d56296508be05033217c0d472 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49638 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/google/dedede/var/boten: Update gpio config for botenStanley Wu
Correct GPIO settings as below reason: 1. GPP_G7 not being used but set to NF. 2. GPP_C22 and GPP_C23 is set to NC but internal pull down to 20K BUG=b:177283756 BRANCH=dedede TEST=emerge-dedede coreboot chromeos-bootimage and boot into emmc Change-Id: Idf25674efa2336bde98c5abaff278484fd71ea8b Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49348 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ben Kao <ben.kao@intel.com> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-21mb/google/dedede/var/boten: Replace generic driver with sx9324 driverStanley Wu
Replace i2c driver for the SX9324 proximity detector device. This is first draft settings, will modify it after fine tuning. BUG=b:175932166 BRANCH=dedede TEST=run "i2cdump -y -f 15 0x28" to confirm registers as except. un-approach： => register address: 0x01 value: 0x00 approach: => register address: 0x01 value: 0x02 Change-Id: I0c8b5948266a07092799c6db556383fa08b924e6 Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49018 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-21mb/google/dedede/var/boten: Update gpio settingStanley Wu
Correct GPIO settings as below reason: 1. GPP_D19/GPP_D20/GPP_D21 not being used but set to NF. 2. GPP_B7 should configure as WWAN SAR detect ODL, but set to NC BUG=b:175932166 BRANCH=dedede TEST=emerge-dedede coreboot chromeos-bootimage and boot into emmc Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Change-Id: Id7780d5332551ed3fd20ef14f8b5d31164f16385 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49645 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-20mb/google/poppy: do early pad configuration in early bootstageMichael Niewöhner
Do early pad configuration in early bootblock before console init, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I795b8da3c5e1efb51c8fe4673f025839a1c630bc Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49423 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-01-20mb/google/fizz: do early pad configuration in early bootstageMichael Niewöhner
Do early pad configuration in early bootblock before console init, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I2f484d232a46214ff98168f41f96d56b047892e2 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49422 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-01-20mb/google/eve: do early pad configuration in early bootstageMichael Niewöhner
Do early pad configuration in early bootblock before console init, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I67bdd9a96928b77a9a178afea7dab03dc370312c Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49421 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-01-20mb/google/sarien: do early pad configuration in early bootstageMichael Niewöhner
Do early pad configuration in early bootblock before console init, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I342b9217af0288a3b525e629aac791eb0f880442 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49420 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-01-19trogdor: Initialize BACKLIGHT_ENABLE to 0, only turn it on in payloadJulius Werner
The BACKLIGHT_ENABLE pin on this board unfortunately defaults to a pull-up on power on, meaning the backlight is immediately enabled. Best we can do about that is to turn it off again early and wait until it is actually correct in the panel power sequence to turn it back on. Some panels want an explicit 80ms delay after training the eDP connection before the backlight is turned on (this is probably just to avoid temporary display artifacts, but whatever). We don't want to busy-wait that extra time, so instead just delegate turning on that GPIO to the payload (which is also in charge of the backlight PWM already). Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Id8dafbdcb40175fbc9205276eee698583b971873 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49495 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Douglas Anderson <dianders@chromium.org>
2021-01-19mb/google/volteer: select GOOGLE_SMBIOS_MAINBOARD_VERSIONZhuohao Lee
In order to use the function smbios_mainboard_version() to query the board revision from the EC. we need to select GOOGLE_SMBIOS_MAINBOARD_VERSION. BUG=b:177818769 TEST=1. emerge-volteer coreboot chromeos-bootimage 2. flash the image to the device and check board rev by using command `dmidecode -t 1 | grep Version` Change-Id: I2474ee03845356d0775f6da25274f696ad33f935 Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49644 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-01-19soc/amd/picasso: move HAVE_ACPI_TABLES from mainboards to SoCFelix Held
The SoC code has in implicit dependency on this option, so select it in the SoC code instead of the mainboard code. Change-Id: Iea908c142f4a94a107cf74a31d9f5e29668d4b5b Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49667 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-01-19mb/google/dedede: Create sasukette variantTao Xia
Create the sasukette variant of the waddledee reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:175848514 BRANCH=None TEST=util/abuild/abuild -p none -t google/dedede -x -a make sure the build includes GOOGLE_SASUKETTE Signed-off-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com> Change-Id: I0a554efe0919dc2f5880f0f7817a37bd4be88ed9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49456 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Xuxin Xiong <xuxinxiong@huaqin.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-19mb/google/dedede/var/sasuke: Add LTE modem supportSeunghwan Kim
This change enables LTE modem for sasuke. - Add LTE modem device into devicetree - Add GPIO control for LTE modem power on and off BUG=177177967 TEST=Built and verified modem device existence with lsusb Change-Id: I34ba8ab00b73f24d1786ab014e9981b172a63a27 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49163 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-19mb/google/dedede/var/sasuke: Enable Wifi SAR for sasukeSeunghwan Kim
BUG=None BRANCH=dedede TEST=enable CHROMEOS_WIFI_SAR in config of coreboot, emerge-dedede coreboot-private-files-baseboard-dedede coreboot chromeos-bootimage. Cq-Depend: chrome-internal:3531583 Change-Id: If69258db257353c9b859a27e2a4c088f74b00ab9 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49466 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-19mb/google/dedede/var/lantis: Update DPTF parametersTony Huang
DPTF paramerters from thermal team. 1. PL1 max =5.8W 2. PL1 min =3.8W 3. PL2 =20W BUG=b:177249297 BRANCH=dedede TEST=build image and verified by thermal team. Change-Id: I19654b65613817ebecf979ce7ac4f76d370ebdc2 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49627 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2021-01-19mb/google/kukui: Add discrete EMCP LPDDR4X table for Kakadu/Katsuxuxinxiong
Add EMCP LPDDR4X DDR MT29VZZZCD9GQKPR for ram id 8. BUG=b:176262460 BRANCH=master TEST=emerge-jacuzzi coreboot Change-Id: If00478b9b05ab3ec48b6a8dec37e9f2f9f04e188 Signed-off-by: xuxinxiong <xuxinxiong@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49447 Reviewed-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-19mb/google/zork: remove MST i2c from dalbozPeter Marheine
Dalboz variants do not use an MST hub; remove the i2c tunnel for it. That bus is actually connected to the battery on these devices, which should not be exposed to the AP. BUG=b:175658311 TEST=builds BRANCH=zork Change-Id: If1714a5c441bf185efd2517c7c94e57b5f351f5a Signed-off-by: Peter Marheine <pmarheine@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49628 Reviewed-by: Kangheui Won <khwon@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-18mb/google/dedede/var/sasuke: Disable PCIE RP8 and CLKSRC3Seunghwan Kim
This change disables unused PCIE RP8 and CLKSRC3. Without this change sasuke cannot enter into s0ix properly. BUG=b:176862270 TEST=Built and verified entering s0ix Change-Id: I0828813ed7924669cb0ff97be2565579762c810f Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49300 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Jamie Chen <jamie.chen@intel.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-18mb/google/dedede/var/sasuke: Add USB2 PHY parametersSeunghwan Kim
This change adds fine-tuned USB2 PHY parameters for sasuke. BUG=176060155 TEST=Built and verified USB2 eye diagram test result Change-Id: Id374ed238d92077ca28c1162fd9f070029ee71bd Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49321 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-18mb/google/volteer/var/elemi: Configure USB2 portsWisley Chen
Configure the USB2 port 3/4/9 1. USB2 port3 assign to WWAN, and elemi have no WWAN. 2. USB2 port4/port9 connect to Type-C C1/C0 BUG=b:177483059 TEST=emerge-volteer coreboot Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Change-Id: I9affc69cc325b5eb0219b50bfe46f66eb0bb2016 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49473 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-18ACPI: Select ACPI_SOC_NVS only where suitableKyösti Mälkki
Having some symmetry with <soc/nvs.h> now allows to reduce the amount of gluelogic to determine the size and cbmc field of struct global_nvs. Since GNVS creation is now controlled by ACPI_SOC_NVS, drivers/amd/agesa/nvs.c becomes obsolete and soc/amd/cezanne cannot have this selected until <soc/nvs.h> exists. Change-Id: Ia9ec853ff7f5e7908f7e8fc179ac27d0da08e19d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49344 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Lance Zhao
2021-01-16mb/google/volteer: do UART pad config at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I5e07584d7857052c7a9388331a475f5a073af038 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49425 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-15mb/google/zork: update USB 2.0 controller Lane Parameter for dirinbozKevin Chiu
Enhance USB 2.0 M/B C0, DB C1 A1 port: HS DC Voltage Level(TXVREFTUNE0): 0xe COMPDISTUNE(COMPDISTUNE0): 0x7 BUG=b:165209698 BRANCH=zork TEST=emerge-zork coreboot Change-Id: I371e4295c2ee161096f0a277c0c649bf217269b2 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47857 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-01-15mb/google/zork/var/shuboz: update STAPM add telemetry settingKane Chen
1. Modify STAPM time constant 2500 to 1400. 2. Add telemetry setting: VDD Slope : 30518 VDD Offset: 435 SOC Slope : 22965 SOC Offset: 165 BUG=b:177399751 BRANCH=master TEST=emerge-zork coreboot chromeos-bootimage Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: I251029389c10ee0f17f368b1c00ac666d372fc3c Reviewed-on: https://review.coreboot.org/c/coreboot/+/49386 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-01-15mb/google/zork: update DRAM table for berknipKevin Chiu
Add Hynix DDR4 DRAM H5ANAG6NCJR-XNC, index was generated by gen_part_id BUG=b:176313722 BRANCH=zork TEST=emerge-zork coreboot Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: Ia1947fa158a1113c4a0b1a0d55f657ddaac43382 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49207 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-01-15mb/google/kukui: Add new ddr architecture support for kukuiShaoming Chen
Two configuration files are added: 1. H9HCNNNFAMMLXR-NEE-8GB: new byte mode 2. MT53E1G32D2NP-046-4GB: new single rank mode Also initialize the rank number field 'rank_num' for all configs. BUG=b:165768895 BRANCH=kukui TEST=DDR boot up correctly on Kukui Signed-off-by: Shaoming Chen <shaoming.chen@mediatek.corp-partner.google.com> Change-Id: I1786c1e251e8d6e110cbdce79feeb386db220404 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49108 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-15mb/google/zork/var/vilboz: Add WiFi SAR for VilbozFrank Wu
The fw_config field SPI_SPEED is not used for zork devices. To define SAR config, use the fw_config bit[23..26]. Then vilboz can loaded different WiFi SAR table for different SKUs. BUG=b:176858126, b:176751675, b:176538384 BRANCH=zork TEST=emerge-zork coreboot chromeos-bootimage, then verify that tables are in CBFS and loaded by iwlwifi driver. Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: I5ba98799e697010997b515ee88420d0ac14ca7ec Reviewed-on: https://review.coreboot.org/c/coreboot/+/49296 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-01-15mb/google/volteer/var/voema: Configure USB2 ports for Type CDavid Wu
Based on voema schematics, two USB2 ports 3 and 5 are assigned to type C connectors on Voema board. BUG=b:177483061 b:172535001 TEST=Build and boot Voema. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I12cef85595e511801ab9c563ae4aa26e25875679 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49451 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-15cpu/intel/haswell: Factor out ACPI C-state valuesAngel Pons
There's no need to have them in the devicetree. ACPI generation can now be simplified even further, and is done in subsequent commits. Change-Id: I3a788423aee9be279797a1f7c60ab892a0af37e7 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46908 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-15mb/google/dedede/var/boten: Update LTE GPIO configurationKarthikeyan Ramasubramanian
LTE module is not expected to be powered off during warm reset. Hence configure the LTE_PWR_OFF_ODL (GPP_A10) gpio pad reset configuration to PWROK and set the TX state to 1. BUG=b:163100335 BRANCH=dedede TEST=Verified through the waveforms that power sequence is meeting the LTE module requirements. Change-Id: I8676da6186559288aabe078b6158fc01075c7b41 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48623 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-01-15mb/google/dedede/var/metaknight: Add LTE power on/off sequenceTim Chen
LTE module used in metaknight has a specific power on/off sequence. GPIOs related to power sequence are: * GPP_A10 - LTE_PWR_OFF_R_ODL * GPP_H17 - LTE_RESET_R_ODL 1. Power on: GPP_A10 -> 20ms -> GPP_H17 2. Power off: GPP_H17 -> 10ms -> GPP_A10 3. Warm reset: GPP_A10 keeps high, GPP_H17 goes low at least 2ms Configure the GPIOs based on these requirements. BUG=b:173671094 TEST=Build and boot Metaknight to OS. Ensure that the LTE module power sequence requirements are met. Change-Id: Ibff16129dfe2f1de2b1519049244aba4b3123e52 Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48195 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-15mb/google/asurada: Implement HW reset functionYidi Lin
TEST=call do_board_reset() manually. Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Change-Id: I355f71e731f1045cd80a133cd31cf4d55f14d91f Reviewed-on: https://review.coreboot.org/c/coreboot/+/49237 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-01-14mainboard/volteer: Configure UsbTcPortEn valueBrandon Breitenstein
The default value is not sufficient to correctly configure the Type-C ports as it has all ports disabled by default. On Volteer ports 0 and 1 are enabled so setting this value to 0x3 and correctly keeping the IomPortPadCfg values at 0 for ports that have a retimer and ports that are not configured. These values were set to 0x90000000 to avoid s0ix issues which arose from the UsbTcPortEn value being incorrect. BUG=b:159151238 BRANCH=firmware-volteer-13672.B TEST=Built image for Voxel and verified that s0ix cycles complete without any issues Change-Id: Ib4f2bd0f68debd4e97ccaab9e1d8a873dc4e4d9f Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48814 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-14soc/amd/stoneyridge: use SOC_AMD_COMMON_BLOCK_UARTFelix Held
Since the functions that get called by the coreboot console initialization code aren't in the SOC-specific code anymore, the SOC's uart.c can be included unconditionally in the build now. This also replaces the STONEYRIDGE_UART Kconfig option with the common AMD_SOC_CONSOLE_UART one. Change-Id: I09c15566a402895d6388715e8e5a802dc3c94fdd Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49375 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-14mb/google/dedede/var/boten: Support ELAN i2c-hid touchscreen for botenflexStanley Wu
Update ELAN i2c-hid touchscreen configuration BUG=b:172517685 BRANCH=dedede TEST=Verify touchscreen is working fine on botenflex Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Change-Id: Ia7c81fd0a772968ec32406f1e366a90481fc5ad8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49114 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-13mb/google/kahlee,zork: Use mainboard_fill_gnvs()Kyösti Mälkki
Change-Id: Ic9cdcc497bf1a9f5bfed5e6d95040bfa602b0b89 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48732 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-13mb/google/volteer/variants/delbin: Update PL1 min and max for DelbinDeepika Punyamurtula
Update PL1 min and max values for Delbin systems BUG=b:168958222 BRANCH=None TEST=Build and verify on delbin system Signed-off-by: Deepika Punyamurtula <deepika.punyamurtula@intel.com> Change-Id: I2152f0dbeb0ae463b78464571b6c434830f0082a Reviewed-on: https://review.coreboot.org/c/coreboot/+/49364 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Zhuohao Lee <zhuohao@chromium.org>
2021-01-13mb/google/volteer: Add CSE Lite SKU support to Copanohao_chou
This will allow CSE RW FW updates and also fixes the problem where no sound is emitted from the speakers. BUG=b:174338903 BRANCH=firmware-volteer-13672.B TEST=emerge-volteer coreboot Signed-off-by: hao_chou <hao_chou@pegatron.corp-partner.google.com> Change-Id: I875f6b32c4053ef6d23ad7606cd35a129a78c306 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49290 Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-12mb/google/brya: Initialize overridetree.cbEric Lai
Initiate overridetree.cb based on latest schematic. BUG=b:174266035 TEST=Build Test Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I31e5ac1703476083ac71dac30b0a3299b38384c0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48794 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-12mb/google/brya: Add gpio tableEric Lai
Follow latest schematic to fill gpio table. BUG=b:174266035 TEST=Build Test Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I3a983605b5139ff8510a0cf225e6564b9215cb1a Reviewed-on: https://review.coreboot.org/c/coreboot/+/48290 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-12mb/google/volteer: Configure Voxel USB2 ports for Type CJohn Zhao
Two USB2 ports 4 and 9 are assigned to type C connectors on Voxel board. This update configures these USB2 ports for Type C which will allow USB2 port reset message upstream from PCH to CPU to recover a USB3 device that downgraded to USB2 to upgrade back to USB3. BUG=b:176575892 TEST=Booted to kernel on Voxel board and verified usb2 port reset message enable bits through pch xhci_mmio_base + R_XHCI_MEM_U2PRM_U2PRDE where the offset register R_XHCI_MEM_U2PRM_U2PRDE has value 0x92f4. Validated various USB3 devices enumeration. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: Ia370a449a41701e690c1c507d70bedfce2076a65 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49053 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.corp-partner.google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2021-01-12mb/google/zork/var/vilboz: Fix FW_CONFIG_SHIFT_WWAN valueJohn Su
The FW config takes 2 bits for USE_FAN[27,28]. So FW_CONFIG_SHIFT_WWAN value should be 29. BUG=b:174121847 BRANCH=zork TEST=build vilboz Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: Ica6d04f9c48aa0800189283608bf57416ac75cf7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49236 Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-11mb/google/octopus: add audio codec into SSFC support for MeepTony Huang
BUG=b:171757619 BRANCH=octopus TEST=adjust SSFC value of CBI to select RT5682 or DA7219 then check whether device tree is updated correspondingly by disabling unselected one. Change-Id: I37390535e263b4b9547ad7307278e3360ba836bd Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48945 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com>
2021-01-11mb/google/volteer: Add CSE Lite SKU support to DrobitWayne3_Wang
This will allow CSE RW FW updates and also fixes the problem where no sound is emitted from the speakers. BUG=b:176536593 BRANCH=firmware-volteer-13672.B TEST=emerge-volteer coreboot Signed-off-by: Wayne3_Wang <wayne3_wang@pegatron.corp-partner.google.com> Change-Id: I69962a5b7c7c464280b35c834f7ee1c9b77db6fd Reviewed-on: https://review.coreboot.org/c/coreboot/+/49197 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-11mb/google/volteer: Set FORCE_PWR low at boot timeJohn Zhao
While FORCE_PWR is set high, it prevents retimer from entering low power state. S0ix failure occurs while USB4 Gatkex is connected on Port-0. This change sets FORCE_PWR(GPP_H10) low. This FORCE_PWR GPIO will be toggled by kernel through DSM method while updating retimer firmware. BUG=b:174166586 Cq-Depend: chromium:2594438 TEST=Verifed s0ix cycles with USB4 Gatkex connected on Port-0. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: Ie4b442e1078379c522a94bfdc00cd99e6f9b8170 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48649 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-11mb/google/dedede/var/magolor: Remove the unused touch controllerRen Kuo
Remove unused touch controller - Goodix BUG=None BRANCH=dedede TEST=build firmware Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Change-Id: I2a01666bc1e353e21ddf961a0eb721a0cb4013db Reviewed-on: https://review.coreboot.org/c/coreboot/+/49221 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10mb/google/cyan: Move board_id() to mainboard_fill_gnvs()Kyösti Mälkki
Only a google/cyan variant evalutes BDID in ASL. Change-Id: I3d839333333b4762ae5350734c85471a3c12838a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49003 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10soc/intel: Replace acpi_init_gnvs()Kyösti Mälkki
Rename these to soc_fill_gnvs() and move the callsite away from mb/. Change-Id: I760c36f65c6122103f2be98fc11ee13832c2772e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48716 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10mb/x/acpi_tables: Rename to mainboard_fill_gnvs()Kyösti Mälkki
Rename acpi_create_gnvs() functions under mb/ to reflect their changed functionality. Remove now empty mb/acpi_tables.c files. Change-Id: Ia366867ef73d1ade9805dc29b8e14b3073f44f60 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48707 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10mb/x/acpi_tables: Move EC_RW detectionKyösti Mälkki
These boards without ChromeEC do not set ACTIVE_EC_RW flag as part of the gnvs_assign_chromeos() function. Create abstraction to avoid <vendorcode/chromeos/x> include. Change-Id: Ic6029e1807fcfe7dd2c766ce8221e347b6b096f9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48777 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10ACPI: Drop redundant ChromeOS setup for GNVSKyösti Mälkki
Already done in common gnvs_get_or_create() implementation once gnvs_chromeos_ptr() is defined for platforms. Change-Id: I90fa2bc28ae76da734b3f88be057435aed9fe374 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48703 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-09mb/google/parrot: Replace while-loop with do-whileFelix Singer
Fixes linter error complaining about trailing semicolon. Change-Id: I3f74f25cb2e3edcdd509abd86d80098241c05741 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49201 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-09mb/google/parrot: Let else statement follow closing braceFelix Singer
Fixes a linter error. Change-Id: I1302e32b0d52e37d9cb4503128edc7d1df1c3bd8 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49200 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-25 23:08:59 +0000