summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Expand)Author
2020-08-18mb/google/dedede: Fix S3 wake using trackpadMeera Ravindranath
2020-08-18src: Remove unused 'include <delay.h>'Elyes HAOUAS
2020-08-18src: Remove unused 'include <stddef.h>Elyes HAOUAS
2020-08-17mb/google/volteer: Make devicetree default as Aux Orientation retimer controlledBrandon Breitenstein
2020-08-17mb/google/zork: Switch to normal read mode for EM100Furquan Shaikh
2020-08-17mb/google/dedede/var/magolor: Generate SPD ID for supported partsRen Kuo
2020-08-17mb/google/zork: adjust i2c2 data hold time for TPKevin Chiu
2020-08-17mb/google/volteer: Define stop_gpio for goodix touch screenCaveh Jalali
2020-08-17mb/google/dedede: Update the SLP_Sx assertion widths and PwrCycDurV Sowmya
2020-08-15mb: remove unnecessary FADT flag devicetree entries for PicassoFelix Held
2020-08-14mb/google/volteer: Only enable TBT root ports if USB4 is supportedBrandon Breitenstein
2020-08-14mb/google/dedede: Add a board specific resetKarthikeyan Ramasubramanian
2020-08-14mb/google/octopus/variants/casta: Disable xHCI compliance modeSeunghwan Kim
2020-08-14mb/google/octopus: Set default value of ModPhyIfValue parameterSeunghwan Kim
2020-08-13mb/google/zork: Switch to using FW_CONFIG instead of SKU_IDBhanu Prakash Maiya
2020-08-13mb/google/zork: Use FW_CONFIG to enable/disable eMMC on EzkinilBhanu Prakash Maiya
2020-08-13mb/google/zork: Add helper function to read DB ID bits in FW_CONFIGBhanu Prakash Maiya
2020-08-13mb/google/zork: Remove validity checks for FW_CONFIG in CBIBhanu Prakash Maiya
2020-08-13mb/google/volteer/var/halvor: Update dq/dqs mappingsFrank Wu
2020-08-13mb/google/volteer/halvor: Enable card reader function on HalvorFrank Wu
2020-08-13mb/google/asurada: Add new MT8192 mainboard "Asurada"CK Hu
2020-08-13mb/google/zork: Update PICASSO_FW_*_POSITION to match new layoutFurquan Shaikh
2020-08-13mb/google/zork: Disable ACP I2S wake for schematic version 3.6+Furquan Shaikh
2020-08-12mb/google/volteer/halvor: Update settings for WiFi/BT functionsFrank Wu
2020-08-12mb/google/zork: expose stop gpio for trembyleAaron Durbin
2020-08-12mb/google/dedede/variants/drawcia: add DTT supportSumeet R Pawnikar
2020-08-12volteer: Create lindar variantJulia Tsai
2020-08-12mb/google/zork: Reorganize chromeos.fmd to increase WP_RO to 8MiBFurquan Shaikh
2020-08-12mb/google/kukui: revise per-device memory mapping tableHung-Te Lin
2020-08-11mb/google/zork: config ddi for dirinbozKevin Chiu
2020-08-11mb/google/zork: fix incorrect DRAM SPD table load for dirinbozKevin Chiu
2020-08-11mb/google/zork: move USB OC pin mapping to trembyle base boardFelix Held
2020-08-10mb/google/volteer: Pull up GPP_D16 instead of driving itCaveh Jalali
2020-08-10mb/google/volteer/var/terrador: Update gpio settings for Proto2David Wu
2020-08-08mb/google/zork/trembyle: comment why USB OC pin mapping is differentFelix Held
2020-08-08soc/intel/skylake: Enable CIO depending on devicetree configurationFelix Singer
2020-08-08soc/intel/skylake: Enable SA IMGU depending on devicetree configurationFelix Singer
2020-08-08soc/intel/skylake: Enable SDXC depending on devicetree configurationFelix Singer
2020-08-07mb/google/zork: Revert Don't expose reset GPIO for touchscreen to OSMartin Roth
2020-08-07soc/intel/skylake: Enable thermal subsystem depending on devicetreeFelix Singer
2020-08-07soc/intel/cnl: Set Heci1Disable depending on devicetree configFelix Singer
2020-08-07mb/google/volteer: support variant defined spd pathsNick Vaccaro
2020-08-07Revert "mb/google/volteer/var/halvor: Update dq/dqs mappings"Paul Fagerburg
2020-08-07mb/google/dedede/var/magolor: Select 16 MB SPI ROMRen Kuo
2020-08-06mb/google/volteer/var/halvor: Update dq/dqs mappingsAmanda Huang
2020-08-06mb/google/zork: Configure GPIO_89 as PAD_NCFurquan Shaikh
2020-08-06mb/google/zork: Add touchscreen power controlFurquan Shaikh
2020-08-06mb/google/zork: Switch USI_RESET to active low polarity for v3.6+Furquan Shaikh
2020-08-06mb/google/zork: Use dev_nested_path for dmic gpio updateJosie Nordrum
2020-08-06mb/google/zork: Make SW changes for HP_INT_ODL in schematic v3.6Josie Nordrum
2020-08-06mb/google/zork: Add kconfigs to check schematic version 3.6Josie Nordrum
2020-08-06mb/google/volteer: add support for ddr4 memoryNick Vaccaro
2020-08-06mainboard/google/puff: Remove second temp sensorAndrew McRae
2020-08-06mb/google/kukui: Add ddr geometry to support 6GB, 8GB DDR bootupHuayang Duan
2020-08-06mb/google/kukui: Add a new config 'Fennel'xiatao5
2020-08-05mb/google/volteer/var/voxel: Add Raydium touchscreen supportDavid Wu
2020-08-05mb/google/vilboz: update telemetry settings for vilbozPeichao Wang
2020-08-05mb/google/zork/ezkinil: Fix ELAN touchscreen ACPI nodeLucas Chen
2020-08-05src: Use space after 'if', 'for'Elyes HAOUAS
2020-08-05baytrail mainboards: Clean up mainboard.cArthur Heymans
2020-08-05mb/google/zork: update DRAM SPD table for dirinbozKevin Chiu
2020-08-04mb/google/zork/var/vilboz: Enable support for garaged stylusFurquan Shaikh
2020-08-04soc/intel/baytrail: Factor out `acpi_fill_madt()`Angel Pons
2020-08-04mb/**/{devicetree,overridetree}.cb: Indent with tabsAngel Pons
2020-08-03mb/google/zork: Pass oscout system clk to rt5682Akshu Agrawal
2020-08-03mb/google/dedede: Update CPU critical temperatureSumeet R Pawnikar
2020-08-03mb/google/kukui: Add Micron 8GB discrete LPDDR4X DDR supportHuayang Duan
2020-08-03mb/google/dedede/var/madoo: Add discrete WiFi configurationDtrain Hsu
2020-08-03mb/google/dedede/var/madoo: Support Elan touchpad and configure I2C portsDtrain Hsu
2020-08-03mb/google/dedede/var/madoo: Enable Goodix touchscreenIan Feng
2020-08-03mb/google/volteer: Change wake to be triggered on a raising edgeAlex Levin
2020-08-03mb/google/kukui: indent config names for burnet and escheHung-Te Lin
2020-08-03mb/google/volteer/var/todor: Support ELAN i2c-hid touchpadDavid Wu
2020-08-03mb/google/zork: Add Samsung K4AAG165WA-BCTD SPDKevin Chiu
2020-07-30mb/amd,google/mandolin,zork: Set EFS SPI platform configMatt Papageorge
2020-07-30mb/google/zork: remove indirection for dxio lane configurationAaron Durbin
2020-07-30mb/google/zork/var/ezkinil: Configure boot media for new SKUsLucas Chen
2020-07-30mb/google/zork: add USB over-current pin mapping to devicetreeFelix Held
2020-07-30mb/google/dedede: Add Goodix touchscreenEvan Green
2020-07-29mb/google/volteer: Update TCSS D3Hot and D3Cold configurationJohn Zhao
2020-07-29soc/intel/skylake: Enable HDA depending on devicetree configurationFelix Singer
2020-07-29soc/intel/skylake: Enable eMMC depending on devicetree configurationFelix Singer
2020-07-29soc/intel/skylake: Enable TraceHub depending on devicetree configurationFelix Singer
2020-07-29soc/intel/skylake: Enable SMBus depending on devicetree configurationFelix Singer
2020-07-29soc/intel/skylake: Enable LAN depending on devicetree configurationFelix Singer
2020-07-29soc/intel/skylake: Enable SATA depending on devicetree configurationFelix Singer
2020-07-29mb/google/zork: update stapm parameter for berknipKevin Chiu
2020-07-29mb/google/dedede/var/magalor: Generate SPD ID for supported partsKarthikeyan Ramasubramanian
2020-07-28mb/google/zork: Add Bluetooth reset gpios to devicetreeRob Barnes
2020-07-28mb/google/dedede/var/madoo: Generate SPD ID for supported partsDtrain Hsu
2020-07-28mb/google/dedede/var/madoo: Add audio support (ALC5682, MX98360A)Dtrain Hsu
2020-07-28mb/google/dedede/var/madoo: Configure USB port setting for MadooDtrain Hsu
2020-07-28mb/google/dedede/var/madoo: Configure GPIO for MadooDtrain Hsu
2020-07-28mb/google/volteer/var/voxel: Add memory configurationSheng-Liang Pan
2020-07-28mb/google/volteer/var/volteer: I2C5 trackpad bus freq 400 kHz Johnny Li
2020-07-28mb/google/volteer2: Add support for passive USB-C daughterboardCaveh Jalali
2020-07-28mb/google/dedede/var/waddledee: Add discrete WiFi configurationKarthikeyan Ramasubramanian
2020-07-28mb/google/volteer: sync'ing todor with terradorYH Lin
2020-07-28mb/google/volteer: Create todor variantYH Lin
2020-07-28broadwell: Factor out PIRQ routing from devicetreeAngel Pons
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-03 18:32:28 +0000