summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Collapse)Author
2018-03-19mb/google/octopus: Fix GPIO config for DRAM_IDsJustin TerAvest
The GPIO pad configurations for GPIO68-71 are incorrectly configured as outputs. This change corrects them to be inputs. BUG=b:74932341 TEST=None Change-Id: I319f8a64d83c29ed150316c15a8d429cc7c024f3 Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/25217 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-19mb/google/poppy: Config GPIO for DMIC by different sku idamanda_hwang
BUG=b:74177699 BRANCH=poppy TEST=Verify audio recorder function by different SKU ID Change-Id: Ic6570703f6ab4a1b03cbba8370fc0f597ab6bcf2 Signed-off-by: amanda_hwang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/25148 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-03-19mb/google/octopus: Configure PCH_WP_OD early.Justin TerAvest
The GPIO for EEPROM write-protect should be configured early, before romstage. This change configures that pad earlier. This pad is the same on the existing Octopus schematics. BUG=None TEST=None Change-Id: Idf296ba6aad75b890afabd6f7c7c51fbaf911214 Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/25250 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-03-19mb/google/fizz: Enable VMXShelley Chen
We are enabling at the kernel level, but that is triggering an issue where FSP expects it to be disabled so it forces a cold reboot on every warm reboot, clearing the ramoops logs. Enabling in BIOS so it matches what the kernel expects. This is the same change that were done for eve: https://review.coreboot.org/#/c/22449/ BUG=None BRANCH=None TEST=echo PANIC > /sys/kernel/debug/provoke-crash/DIRECT check for /dev/pstore/console-ramoops Change-Id: Icd0bd01f5aee4c89f503eebba0808a1f3059e739 Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/25251 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-03-19soc/amd/stoneyridge/southbridge.c: Remove configure_stoneyridge_uartRichard Spiegel
The GPIO programming of configure_stoneyridge_UART() can be done by the early GPIO table, AOAC enabling was already removed. So configure_stoneyridge_uart() became redundant. Remove procedure configure_stoneyridge_uart(). BUG=b:74258015 TEST=Build and boot kahlee, observing serial output does not changes from previous serial output. Change-Id: Ie67051d7b90fa294090f6bfc518c6c074d98cc98 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/25192 Reviewed-by: Garrett Kirkendall <garrett.kirkendall@amd.corp-partner.google.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-17mb/google/octopus: Do not configure GPIO_149 as GPOFurquan Shaikh
GPIO_149 is used as ESPI clock feedback and configuring it as a GPO results in EC communication failure. This change removes the configuration of GPIO_149 as GPO in ramstage so that it remains configured for ESPI (as it was when AP came out of reset). BUG=b:75348718 Change-Id: Ie4f21b12fae027cdba54ce147e6d1a88ee854792 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/25259 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-16soc/intel/apollolake and mainboards: Use pcie_rp_clkreq_pin arrayFurquan Shaikh
This change uses an array pcie_rp_clkreq_pin for accepting CLKREQ# from mainboards instead of defining a separate property for each root port. This allows us to use memcpy to copy the entire array into FSP params as well as new properties for PCIe root ports can be added as arrays in future CLs. BUG=b:74633273 BRANCH=reef,coral Change-Id: Ifa05f1e38fcfd95063ec327712e472cdbd12dbb7 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/25186 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-16mb/google/eve: Update DPTF parametersDuncan Laurie
1) Set the critical temperature threshold to 100C to match changes on other boards. This is intended to reduce DPTF-initiated thermal shutdowns before it has had a chance to react. 2) Reduce the CPU passive threshold sample rate from 5 seconds to 1 second so DPTF will react faster to rapid temperature increases. BUG=b:67459049 BRANCH=eve TEST=manual performance/power testing on Eve hardware Change-Id: Ib660dcb25422fea0aa692fac5ba65b49808965ba Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/25153 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-03-15mb/google/poppy/variants/nami: Add gpio-keys ACPI node for PENHShelley Chen
Use gpio_keys driver to add ACPI node for pen eject event. Also setting gpio wake pin for wake events. BUG=b:73121017 BRANCH=None TEST=./util/abuild/abuild -p none -t google/poppy -x -a Change-Id: I5d87d938ac3a4e52e676850b9d8b80e83726275d Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/25162 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-03-15mb/google/poppy/variants/nami: Use GPP_B4 as Touchscreen Power EnableShelley Chen
Touchscreen power enable for Nami has moved from GBB_C22 to GPP_B4 in the latest schematics. BUG=b:74347464 BRANCH=None TEST=./util/abuild/abuild -p none -t google/poppy -x -a Change-Id: I3b1794d44f25c0d42d082d63b9e3ec3dfcef7528 Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/25154 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-15mb/google/octopus: Enable audio components.Shamile Khan
Octopus uses MAX98357A speaker amplifier and DA7219 codec. Add device tree entries and Kconfig settings for these components. BUG=b:73292699,b:73230879 BRANCH=None TEST=Build coreboot for Octopus board. Change-Id: I27b5113677a8bd44dbbae587e27616d9e0b90d7f Signed-off-by: Shamile Khan <shamile.khan@intel.com> Reviewed-on: https://review.coreboot.org/25117 Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-14mb/google/poppy/variants/baseboard: Add gpio-keys ACPI node for PENHNicolas Boichat
This change uses gpio_keys driver to add ACPI node for pen eject event. BUG=b:74413116 TEST=Verified using evtest that pen eject event results in events as expected. Change-Id: I6019d633f4337137bb9fbba770040cb5b30da773 Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Reviewed-on: https://review.coreboot.org/25147 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-14mb/google/zoombini/variants/meowth: Make FPMCU interrupt level-triggeredVincent Palatin
Fix the IRQ configuration: it must be level-sensitive not edge-sensitive (and match the GPIO configuration). BUG=b:71986991 BRANCH=none TEST=on Meowth, /proc/interrupts shows 'IO-APIC 46-fasteoi chromeos-ec' then run 'ectool --name=cros_fp fpmode fingerup' and see the number of interrupts incrementing and the MKBP event happening. Change-Id: Iba8cff21d637fe6bf4ef5152fc01aaf98906477d Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Reviewed-on: https://review.coreboot.org/25110 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-14mainboard/google/meowth: Enable System Agent dynamic frequencyLijian Zhao
Enable System Agent dynamic frequency support by default. BUG=None TEST=Build and flash with debug version FSP, check SaGv in serial print to be set to "4". Change-Id: I7dd29db206b06e600407bb0b1d0bc7530f4ac93e Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/25093 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-13mb/google/octopus: Add yorp variantJustin TerAvest
This creates a yorp variant for octopus; nothing too interesting now, just picks up values from the baseboard. BUG=b:74443669,b:74067452 TEST=Build Change-Id: I55af8f02d33138a3b6bab7860a665e3deb5595c2 Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/25086 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-13mb/google/poppy/variants/nautilus: Enable SAR configsFurquan Shaikh
This change enables SAR configs when building with CHROMEOS option. BUG=b:74439919 Change-Id: I11a8fa04a77f688ed288780f2c605b8ac701f5a9 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/25104 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-13mb/google/poppy/variants/nami: Use internal pulldown for MEM_CONFIG_4Furquan Shaikh
Since nami proto did not have any external pull on MEM_CONFIG_4, use a weak internal pull down before reading it. BUG=b:74420123 TEST=Verified that the value read for MEM_CONFIG_4 is correct on nami. Change-Id: I45989d2ca35b863f391baba9e2f2e602033217d4 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/25103 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-12mb/google/octopus: Fix lpddr4 skusJustin TerAvest
The current lpddr4 skus entries do not match the RAMID table in the schematic. This commit updates that so they are consistent. Thankfully, the values are the same as for glkrvp, so I just copied from there. BUG=b:74392818 TEST=None Change-Id: I2e63ea0b27ef58038e5a37949c31a808989c98c2 Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/25063 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-03-12mb/google/zoombini/variants/meowth: change gpios to no-connectsNick Vaccaro
The following gpios are no longer needed and are now configured as no-connects : GPP_C6, GPP_H4, GPP_H5 BUG=b:74406599 BRANCH=master TEST=none Change-Id: I55769336195db0e57dfbaf5b5770e15050138341 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/25070 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-12mb/google/poppy: Clear memory_params before initializing themNicolas Boichat
Make sure that fields that are not updated in variant_memory_params keep a default value of 0. In particular, use_sec_spd is intended to have a default value of 0 on all platforms. Without this patch, a random value is used and all boards (except nami) get stuck on boot. BRANCH=poppy BUG=b:74439917 TEST=Nautilus and poppy can boot, and do not get stuck at "CBFS: 'sec-spd.bin' not found." Change-Id: I06c6511625de930903ae13788bdcd27667a17886 Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Reviewed-on: https://review.coreboot.org/25101 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-10meowth: Add SAR Sensor in devicetreeGwendal Grignou
Add left and right semtech SAR sensor. BUG=b:74363445 TEST=Test on meowth, alongside 24962. Check in sysfs that SX9310 is presented: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/SX9310:00 /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0d/SX9310:01 Change-Id: I017db1105800003b312e75dc7e1e27be535a457a Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-on: https://review.coreboot.org/25062 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-03-09mb/google/zoombini: re-enable software syncCaveh Jalali
we had disabled software sync for bringup - we now have enough functionality in place to turn on software sync. Change-Id: Ib7f5a24ed8a47cb44b3f505e3cd49e0cb6931dc0 Signed-off-by: Caveh Jalali <caveh@google.com> Reviewed-on: https://review.coreboot.org/23630 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-09mb/google/poppy/variants/nami: Fix typo in nami MakefileFurquan Shaikh
Change SECONDARY_SPD_SOURCES to SEC_SPD_SOURCES as that is what the spd target expects. TEST=Verified that sec-spd.bin is present in coreboot.rom Change-Id: I4299df1eb9009095ef899c5b83823750dfc715d8 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/25083 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-03-09mainboard/google/kahlee: Set GPIO 40 to inputMartin Roth
GPIO 40 isn't currently being used, so set it to be an input. BUG=b:73387647 TEST=Build & boot grunt Change-Id: I5a04cbab1276cd20e7f9c7576e8111089dd2b155 Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/25016 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-09mainboard/google/kahlee: Disable Bayhub part on board_id 0Martin Roth
The Bayhub part is not used on proto with board_id 0, so disable it. BUG=b:74248569 TEST=Build & boot Grunt. Bayhub part is disabled. Change-Id: I635356d41bab637726594d403d66dde730f12256 Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/25015 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-03-08mb/google/poppy/variants/nami: Define smbios_mainboard_sku to return SKU IDsShelley Chen
Return proper SKU IDs so that mosys can return the proper variant. BUG=b:74059798 BRANCH=None TEST=./util/abuild/abuild -p none -t google/poppy -x -a Change-Id: I665fa491de6e277fea5cc071b1f04a21317bccba Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/25028 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-03-08mb/google/kahlee: Do not define SIO_EC_ENABLE_COM1Daniel Kurtz
This #define tells superio.asl to add a "PNP0501" "Plug and Play 16550A-compatible COM port" entry to kahlee's ACPI tables. The EC on kahlee boards do not provide a "Serial Port 1" that should be exposed via ACPI to the OS. In fact, this entry confuses the kernel and in some cases can cause it to try to redirect output to a non existing port. BUG=b:74200887 TEST=Deploy to grunt. Boot kernel with SERIAL_PORT_DFNS undefined and "earlycon=uart,mmio32,0xfedc6000,115200,48000000" on the kernel command line, and with an image with serial console enabled. => System boots with (kernel) serial console enabled, starting from 0.00 (earlycon), with no gaps in its output, and serial console also allows logging in. Change-Id: I0eaed9b4461bb6a6c1aa4ce97752f588d4322b35 Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/25021 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-03-08mb/google/poppy : Get SKU_ID from EC for Nami/Vayneamanda_hwang
CBI abbreviates Cros Board Info. BUG=b:74177699 BRANCH=master TEST=Verify CPU log shows expected SKU ID on Nami. Change-Id: I42dd177de8c49cf3c122c2ebb1fcf42e5ba4cd75 Signed-off-by: amanda_hwang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/24996 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-03-08google/scarlet: Adjust K&D power sequence from softwareBrian Norris
Hardware updates have suggested we need to configure the K&D panel's power sequence in software, not in hardware. Without this change, K&D panels will no longer power on correctly and will instead display a black screen. Per K&D's suggestion, we tweak these two commands. From the little HW docs I have, this looks like it's: (Address 0xB7, Value 0x02) -> set BC_CTRL=bit(1) (Back light control) to 1 (Address 0xF1, Value 0x22) -> change GPO2_SEL=bits(0:3) from MIPI_TE(0001b) to BC_CTRL (0010b) BRANCH=scarlet BUG=b:73133861 TEST=KD display with and without HW fix on Scarlet Change-Id: Ia076a378b10417dd9891746f9bc1086360a0f6e6 Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-on: https://review.coreboot.org/25023 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-08mb/google/octopus: Add gpio configs for communitiesShaunak Saha
This patch configures the gpios for all the gpio communites. Change-Id: Ibc16edd96f4ef6d55f3a99b195bf4920929b1578 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Signed-off-by: Shamile Khan <shamile.khan@intel.com> Reviewed-on: https://review.coreboot.org/23799 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-03-08mb/google/octopus: Add device tree settingsShamile Khan
Change-Id: Id45409a9561671237410dd2f8f0bbfe61ff33562 Signed-off-by: Shamile Khan <shamile.khan@intel.com> Reviewed-on: https://review.coreboot.org/23846 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-03-08mb/google/nautilus: Correct LINK FREQ of imx258 sensorAlan Chiang
Per vendor datasheet, corrected linkfreq of imx258 as {633600000, 320000000} BUG=None BRANCH=None TEST=Verified the MIPI and USB camera function on DUT board Change-Id: Ie5beed44c15e26b9f82cb305a91b8ff90a9ea867 Signed-off-by: Andy Yeh <andy.yeh@intel.com> Reviewed-on: https://review.coreboot.org/24990 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-03-08mb/google/kahlee: Add SKU supportSimon Glass
We want to report the board SKU via the SMBIOS tables. Add support for this, obtaining the ID itself from the EC. BUG=b:74175244 BRANCH=none TEST=manually on grunt with another CL: mosys platform sku 0 Change-Id: I9e08d64df3f89d3703de047dd9ec8e1717e6b212 Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-on: https://review.coreboot.org/25011 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-03-08mb/google/poppy/variants/nami: Add WACOM EMR supportjasper lee
Add WACOM EMR in devicetree I2C #2. BUG=b:72062737 BRANCH=master TEST=Verify EMR on nami Change-Id: Icbe809a48959e5749262aeb1b89b09c4bdafbbc2 Signed-off-by: jasper lee <jasper_lee@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/24997 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-03-07mb/google/poppy/variants/nami: Add SPD files for namijasper lee
This change adds SPD files for memory IDs 7 on nami. BUG=b:73807138 Change-Id: I25fe3b347057eea75c58bfb88df41bdb28cc1460 Signed-off-by: jasper lee <jasper_lee@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/25007 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-03-07mb/google/zoombini/variants/meowth: enable SAR powerNick Vaccaro
BUG=b:69011806 BRANCH=master TEST=none Change-Id: I2ea44b03336b901af68f9092f3386b42d8516b72 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/24962 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-07mb/google/poppy/variant/nautilus: Configure GPP_B0 for WLAN wakeSeunghwan Kim
As per the latest schematics, this change configures GPP_B0 as wake source for WLAN. BUG=NONE BRANCH=master TEST=emerge-nautilus coreboot Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Change-Id: I72b940452cfbbe471279ef117a868a8ae0b65b8b Reviewed-on: https://review.coreboot.org/23526 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-07mb/google/poppy/variants/nami: Add memory detection logicShelley Chen
Alkali will use LPDDR3, so need to have Nami support both DDR4 and LPDDR3. We do this with the PCH_MEM_CONFIG4 GPIO. BUG=b:73514687 BRANCH=None TEST=None Change-Id: Ife6740ce0e8fe109ded7b954134171ba91895628 Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/25000 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-03-07mb/google/poppy/variants/nami: Add spd filesShelley Chen
Add spd files for LPDDR3 based on info received from factory team. BUG=b:73287172 BRANCH=None TEST=None Change-Id: I8924ce97ea422ef1e9a5becb5ea2fda3bf77d8cf Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/25001 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-03-06google/snappy: enhance CCD type-A USB 2.0 phy strengthKevin Chiu
Alan(11")/BigDaddy(14") right type-A(port#2), CCD(port#4) are occasionally undetectable. USB 2.0 phy needs an override to enhance drive strength. right type-A port#2 PERPORTPETXISET: 4 PERPORTTXISET: 4 IUSBTXEMPHASISEN: 1 PERPORTTXPEHALF: 0 CCD port#4 PERPORTPETXISET: 7 PERPORTTXISET: 7 IUSBTXEMPHASISEN: 1 PERPORTTXPEHALF: 0 BUG=b:72922816 BRANCH=reef TEST=emerge-snappy coreboot Change-Id: I2b18c11709280d00ec3a6ef10f93a416acb4fb45 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/24969 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-06mainboard/google/fizz: Check HDMI HPD and DisplayPort HPDDaisuke Nojiri
Some type-c monitors do not immediately assert HPD. If we continue to boot without HPD asserted, Depthcharge fails to show pictures on a monitor even if HPD is asserted later. Also, if an HDMI monitor is connected, no wait is needed. If only an HDMI monitor is connected, currently the API always loops until the stopwatch expires. This patch will make the AP skip DisplayPort wait loop if it detects an HDMI monitor. And if an HDMI monitor is not detected, the AP will wait for DisplayPort mode (like before) but also its HPD signal. This patch also extends the wait loop time-out to 3 seconds. BUG=b:72387533 BRANCH=none TEST=Verify firmware screen is displayed even when a type-c monitor does not immediately assert HPD. Verify if HDMI monitor is connected, AP does not wait (and firmware screen is displayed on HDMI monitor). Change-Id: I0e1afdffbebf4caf35bbb792e7f4637fae89fa49 Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/23816 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-03-06mb/google/fizz: Skip FSP init for UART 0Duncan Laurie
The GPIO pins for UART 0 on Fizz are routed to the add-in card slot and should not be used as a UART device. coreboot is setting the pins to GPIO Mode but FSP is re-configuring them for Native Mode and the behavior is unexpected when the kernel tries to initialize the UART device. The UART 0 device is PCI function 0 so it needs to be enabled for other functions to be visible to the OS so it can't just be disabled. Instead, set the device to PchSerialIoSkipInit so that FSP will not change the pin state. BUG=b:73006317 TEST=Tested with add-in card on fizz hardware to ensure the pin state does not change when FSP runs or the kernel boots. Change-Id: Id97c1e482ef0d5642fcf9018d802e1d0e073263d Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/24973 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-06Revert "mainboard/google/meowth: enable PCH iSCLK"Lijian Zhao
This reverts commit 2e81f394cffc6f1993a5f004356ed35f6064fe48, as it will have side effect that will make system shutdown failure. System will not enter S5 sleep state, instead a global reset will be generated. Once camera driver ACPI framework ready, isclk programing will be moved into APCI method, in _PS3, isclk will be turned off to save power. BUG=b.72532565 BRANH=master TEST=Apply the changes and flash coreboot, on meowth devices, issue "halt" in OS stage, system can shutdown successfully. Change-Id: If35697911f97c524d9b52bdf4dae5c9ef1cc8618 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/25006 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-05mb/google/poppy: Allow use of optional secondary SPDFurquan Shaikh
This change adds support for variants to use secondary SPD if required. This enables a variant to have different types of memory supported using the same image. BUG=b:73514687 Change-Id: I3add65ead99c510f2d6ec899fbf2cb9a06c79b0c Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/24972 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-05mb/google/poppy/variants: Set pch_trip_temp to 75CFurquan Shaikh
Similar to Soraka, this change sets the pch_trip_temp value to 75C. This is important so that PMC can shutdown the thermal sensor when CPU is in C-state and DTS temp <= pch_trip_temp. BUG=b:74089135 Change-Id: Ic46fa0681796b821dfb014ab91734c960df7846a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/24968 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-03-02sb/intel/common: Fix conflicting OIC register definitionNico Huber
Commit d2d2aef6a3 (sb/intel/{bd82x6,ibexpeak}: Move RCBA macros to a common location) makes some platforms use the wrong OIC register defi- nition. It was extended to 16-bit in the corporate version of ICH10. So let's give the new size and location a new name: EOIC (extended OIC). This only touches the systems affected by the mentioned change. Other platforms still need to be adapted before they can use the common RCBA definitions. Change-Id: If9e554c072f01412164dc35e0b09272142e3796f Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/24924 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Bill XIE <persmule@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-03-02mb/google/zoombini/variants/meowth: Enable NVMeBora Guvendik
Turn on pcie ports 9,10. Enable Root Port 9 and set up clkreq 3. BUG=b:72120814 TEST: Boot to OS via NVMe Change-Id: I272b63b11e6b00ae5bdbef5a37ee517cc0636f6d Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/23208 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-02mainboard/google/zoombini/variant/meowth: enable speed shiftNick Vaccaro
BUG=b:73817825,b:69011806 BRANCH=master TEST=Build and flash to meowth, verify cpufreq shows up in kernel for all cores : localhost ~ # find / -name "cpufreq" /sys/devices/system/cpu/cpu3/cpufreq /sys/devices/system/cpu/cpu1/cpufreq /sys/devices/system/cpu/cpufreq /sys/devices/system/cpu/cpu2/cpufreq /sys/devices/system/cpu/cpu0/cpufreq /sys/module/cpufreq /usr/share/laptop-mode-tools/modules/cpufreq Change-Id: I63242b2b049e37167c0d3b8eab630cb6e15a75fd Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/24902 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-01mb/google/reef/sand: Override USB2 phy settingsKatherine Hsieh
Sometimes the USB device is not detected. USB2 port#1 and #4 PHY register need to be overridden. port#1: PERPORTPETXISET = 4 PERPORTTXISET = 4 IUSBTXEMPHASISEN= 1 PERPORTTXPEHALF= 0 port#4: PERPORTPETXISET = 7 PERPORTTXISET = 7 IUSBTXEMPHASISEN= 1 PERPORTTXPEHALF= 0 BUG=b:72623892 BRANCH=master TEST=emerge-sand coreboot chromeos-bootimage Change-Id: I4051aefbec4583bb1f8babec08fdbeb27f749769 Signed-off-by: Katherine Hsieh <Katherine.Hsieh@quantatw.com> Reviewed-on: https://review.coreboot.org/23879 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-01mainboard/google/meowth: Turn on DBC over USB3.0Lijian Zhao
Intel DCI (direct connect interface) allows debug Intel target using USB3.0 ports. It will support debug via USB stack (DCI Dbc) using USB3.0 only. BUG=None TEST=Turn on DCI trace hub in descriptor.bin and flash the coreboot image. Using DAL to halt/run CPU. Change-Id: I39e68dabfcb9e659733019334299e562eee3681d Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/23446 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2018-03-01mb/google/poppy/variant/nautilus: Change SlowSlewRateForSa settingSeunghwan Kim
If switch to VT2 on nautilus, screen flicker appears. We found if we rollback the change of slew rate setting, then the flicker issue will be gone: https://review.coreboot.org/c/coreboot/+/22588 But nautilus board needs slew rate tuning to reduce EE noise, so we decided to change only SlowSlewRateForSa to 2 (Fast/8) instead of rollback the whole change of the CL:22588. It can remove the flicker on VT2. BUG=b:71397040 BRANCH=master TEST=emerge-nautilus coreboot Change-Id: Id1d4bd8b1316c02c783de708ec4658e030193a26 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/23877 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-03-01mb/google/reef: Override USB2 phy settingsTim Chen
Sometimes the USB device is not detected. USB2 port#1 and #4 PHY register need to be overridden. port#1: PERPORTPETXISET = 4 PERPORTTXISET = 4 IUSBTXEMPHASISEN= 1 PERPORTTXPEHALF= 0 port#4: PERPORTPETXISET = 7 PERPORTTXISET = 7 IUSBTXEMPHASISEN= 1 PERPORTTXPEHALF= 0 BUG=b:72623892 BRANCH=master TEST=emerge-reef coreboot chromeos-bootimage Change-Id: Iab782ac6dfd81af839fff0e60e2b2460ce722733 Signed-off-by: Tim Chen <Tim-Chen@quantatw.com> Reviewed-on: https://review.coreboot.org/23878 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-01mb/google/coral: add usb2 phy setting override for some variantsSheng-Liang Pan
Due to there are some chances USB devices can not be detected. USB2 port#1 and #4 PHY register need to be overridden for variants Santa/Lava/Blue/Bruce/Astronaut. port#1: PERPORTPETXISET = 4 PERPORTTXISET = 4 IUSBTXEMPHASISEN= 1 PERPORTTXPEHALF= 0 port#4: PERPORTPETXISET = 7 PERPORTTXISET = 7 IUSBTXEMPHASISEN= 1 PERPORTTXPEHALF= 0 BUG=b:72623892 BRANCH=master TEST=emerge-coral coreboot chromeos-bootimage Change-Id: I401905685cc3078df657919b162272c3de320296 Signed-off-by: Pan Sheng-Liang <Sheng-Liang.Pan@quantatw.com> Reviewed-on: https://review.coreboot.org/23881 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-01mb/{amd/gardenia,google/kahlee}: Initialize GPIOs earlierJustin TerAvest
The GPIOs for PCIe reset and power enable for WLAN must be set up before amdinitearly for wlan to function. BUG=b:73898539 TEST=Boot, see WLAN controller in lspci Change-Id: I568a3240a54817ab6dcf15fe39f7f1336943852b Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/24916 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-28mainboard/google/zoombini: consolidate SPD makefilesNick Vaccaro
- consolidate commonality in meowth and zoombini's SPD makefiles into a common zoombini/spd/Makefile.inc - move all SPD hex files into zoombini/spd directory - move SPD_SOURCES definitions to variants/$(VARIANT_DIR)/Makefile.inc BUG=b:69011806,b:71776625 BRANCH=master TEST=Verify 'emerge-meowth coreboot' and 'emerge-zoombini coreboot' compile and boot successfully. Change-Id: I2291ebaf0ef5da1b22eb0e8fa7af8dbb50848c29 Signed-off-by: Nick Vaccaro <nvaccaro@chromium.org> Reviewed-on: https://review.coreboot.org/23874 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-28mb/google/poppy/variants/nami: Enable elan touchscreenCrystal Lin
BUG=b:72062694 BRANCH=master TEST=Verify touchscreen on nami works with this change. Change-Id: Iaec71a11121b3d2849f12d18cda0e506be2ace09 Signed-off-by: Crystal Lin <crystal_lin@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/23872 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-02-28mb/google/octopus: Add LPDDR4 memory initRavi Sarawadi
Add LPDDR4 initialization support. BUG=b:73136980 BRANCH=None TEST=Build coreboot for Octopus board. Change-Id: Ieffcfa2f9d075eb0be13562f1a0c7ee503b005d9 Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-on: https://review.coreboot.org/23832 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-27sb/intel/{bd82x6,ibexpeak}: Move RCBA macros to a common locationArthur Heymans
Many generations of Intel hardware have identical code concerning the RCBA. Change-Id: I33ec6801b115c0d64de1d2a0dc5d439186f3580a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23287 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-02-26mainboard/google/zoombini: enable 4 coresNick Vaccaro
BUG=b:70731385 BRANCH=master TEST='emerge-meowth coreboot chromeos-bootimage', flash image.serial.bin to meowth board, boot into kernel, and verify 4 cores are running. Change-Id: Ia233e41acd19b317f82433a5d41d84ea934a66c4 Signed-off-by: Nick Vaccaro <nvaccaro@chromium.org> Reviewed-on: https://review.coreboot.org/23839 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-23mb/google/fizz: Enable PCIe port 11, 12Zhongze Hu
Our CFM daughter card would like to use individual PCIe lanes for two different devices on the card. dlaurie@ has reconfigured PCIe port 9-12 from 1x4 to 1x2 + 2x1 on b2b connector on fizz to meet the requirement: https://chrome-internal-review.googlesource.com/571936 We also need to enable the ports on device tree. BUG=b:72523836 TEST=none BRANCH=fizz Change-Id: Icded9850d833752680e0174b6c476e657817b319 Reviewed-on: https://chromium-review.googlesource.com/923867 Commit-Ready: Zhongze Hu <frankhu@google.com> Tested-by: Zhongze Hu <frankhu@google.com> Reviewed-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/924860 Commit-Queue: Shelley Chen <shchen@chromium.org> Tested-by: Shelley Chen <shchen@chromium.org> Signed-off-by: Zhongze Hu <frankhu@chromium.org> Reviewed-on: https://review.coreboot.org/23845 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2018-02-22mb/google/kahlee/mainboard.c: Fix mainboard_picr_dataRichard Spiegel
While programming interrupts, a message "perhaps this device was defined wrong?" shows up twice. This is caused because some devices have interrupt programmed for APIC mode, but not for non-APIC mode. Fix mainboard_picr_data table by identifying devices programmed with value 0x1F while programmed differently on mainboard_intr_data table. Do so only for devices that are used by kahlee or interrupt required by old OS. BUG=b:70788755 TEST=Build and run kahlee, Verify that message disappears from serial output. Change-Id: Ic285036290519ed3ee617dffa616bd26c61575c5 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/23716 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-02-22mb/google/kahlee: Use GPIO macros for baseboardJustin TerAvest
This commit uses newly defined macros to make it easier to read which iomux function pads are being configured to use. TEST=Booted grunt, confirmed display backlight came on. BUG=b:72875858 Change-Id: I24e5091fc7ef696f8e9c932ce04664e6cc3ccb90 Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/23830 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-22mb/google/kahlee: Correct bad gpio entryJustin TerAvest
There's no need to set the output enable here; this is already handled by the native function. I'm making this correction in this change to prevent the GPIO pin descriptions from getting confusing. BUG=b:72875858 TEST=Booted, confirmed S5_MUX_CTRL high with and without this change. Change-Id: I9e047be7169586c59892ef2bdab915683feeebda Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/23829 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-22mainboard/google/meowth: enable PCH iSCLKLijian Zhao
Turn on PCH iSCLK for meowth platform. BUG=None TEST=Boot up into OS and check register programming with iotools, the command is iotools mmio_read32 0xfdad8000, returned value is 0x03. Change-Id: I1e44e3748c9b37c8f60adcc47a866d445d77cfaa Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/23368 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-22mainboard/google: Disable big, pit, and ryu ec buildsMartin Roth
The EC builds for nyan_big, peach_pit, and smaug (ryu) have been removed from the latest EC codebase, so don't try to build them by default anymore. Change-Id: I53901b32753c5b9b050f517bbf3f10b9071913d4 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/23826 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-22mainboard/google/zoombini: Add config for meowth audioSathyanarayana Nujella
Add NHLT and dt support for meowth with max98373 amp. BUG=b:71724897 TEST='emerge-meowth coreboot' compiles correctly TEST=check SSDT and verify entries for max98373 TEST=check NHLT ACPI tables included blobs for max98373 Change-Id: Ic89bf669c7ab2ef39ce64e4da6a57a7069ee75f9 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/23334 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2018-02-21mainboard/google/kahlee: Add tis_plat_irq_statusChris Ching
For variants that have a cr50 tpm, this enables faster polling when interacting with the tpm. BUG=b:72838769 BRANCH=none TEST=verified on grunt that irq is used and not timeouts for tpm Change-Id: I5786d334b6c1cc70f4c7107c75b07a7e27ac4428 Signed-off-by: Chris Ching <chingcodes@chromium.org> Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/23626 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-20mb/google/poopy/variants/nami: Add Pmax settingGaggery Tsai
This patch adds the Pmax setting in device tree. The Pmax is from MAX(PL4_sku1, PL4_sku2, ..) + ROPmax. Given ROPmax is 30W and the maximum PL4 is from U42, hence the Pmax = 71W + 30W = 101W. BUG=b:72138778 BRANCH=None TEST=USE=fw_debug emerge-nami chromeos-mrc coreboot chromeos-bootimage & ensure the Pmax value is passed to FSP-S. Change-Id: Ief6a134dc5b6bd2b8e07b4a44450e99ff26402d9 Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/23640 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-02-20mb/google/kahlee/OemCustomize.c: Disable bank interleaveRichard Spiegel
AmdInitPost returns AGESA_WARNING. This is because AGESA by default enables bank interleaving, while the HW does not meet the requirements for it. Disable bank interleaving, thus clearing AGESA_WARNING. BUG=b:73118857 TEST= Build and run kahlee. Search for "agesawrapper_amdinitpost() returned AGESA_SUCCESS". Change-Id: Ice9270f9b10051dbb622344919223cf5439f5d7b Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/23763 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-17mb/google/fizz: Wait until display is readyDaisuke Nojiri
Fizz fails to show pictures on a type-c monitor because VBIOS runs before DisplayPort link is ready. With this patch, when firmware needs to display something, Fizz calls google_chromeec_wait_for_display to make sure display is ready. The penalty is up to 2 sec per boot in dev and rec boot. Normal boot won't affected unless there is EC update. BUG=b:72387533 BRANCH=none TEST=Verify screens are displayed on Fizz as follows: 1. Put DUT in normal mode 2. Flash EC image to trigger EC sync (critical update) 3. Trigger manual recovery (insert) 4. Hit ctrl+d to switch to dev mode (to-dev) 5. Confirm to reboot (dev warning) 6. Warm reboot (dev warning) 7. Cold reboot (dev warning) 8. Flash EC image to trigger EC sync (critical update) 9. Trigger manual recovery (insert) Change-Id: I90befe94f93e13904987acda50b2598d034b0031 Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/23746 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-02-17soc/amd/stoneyridge: Normalize GPIO initJustin TerAvest
This makes the flow for GPIO initialization more closely follow that what is performed for other boards so that it's easier to read the flow (and stops relying on BS_WRITE_TABLES). BUG=b:72875858 TEST=Built and booted grunt, built gardenia. Change-Id: Ic97db96581a69798b193a6bdeb93644f6a74fc9d Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/23679 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-16mb/google/{soraka,poppy,nautilus}: Set psys_pmax to 45WNaresh G Solanki
Soraka, Poppy & Nautilus are designed to operate at max power of 45 Watt. Hence set psys_max to 45W. BUG=b:66066340 BRANCH=None TEST=Build and boot soraka. Change-Id: If6f624733830b462329b5f539c20e2aea664143e Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/23757 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
2018-02-16mb/google/zoombini/variants/meowth: enable FPMCU interruptVincent Palatin
Enable the micro-controller interrupt line as a real IRQ. BUG=b:71986991 BRANCH=none TEST=on Meowth, run 'ectool --name=cros_fp fpmode capture' and see the number of interrupts incrementing and the MKBP event happening. Change-Id: Ic0cf03d2a3508148b6482a5a595eaa213eff52c7 Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Reviewed-on: https://review.coreboot.org/23769 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-02-16google/gru: Fix GPIO_WP pull and polarity for ScarletJulius Werner
Turns out the write-protect GPIO polarity for Scarlet is different than for Kevin/Gru, and nobody ever told us. Also, it must not be configured with an internal pull-up or we'll not read the correct value. This patch fixes both issues. BRANCH=scarlet BUG=b:73356326 TEST=Booted Scarlet, confirmed that crossystem wpsw_boot returns the right value in all cases. Change-Id: Idd348ecdf9da8fff7201b83e869ba097b8570f32 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/23767 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-02-15mb/google/poppy/variant/nautilus: Enable and configure DPTFSeunghwan Kim
This change enables DPTF and configures the policy. DPTF parameters were provided by internal power team. BUG=b:67877437 BRANCH=master TEST=emerge-nautilus coreboot Change-Id: I31b31d5282ab38278bc68045ce75fdc6192f1144 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/23731 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-02-15mb/google/octopus: Add new boardHannah Williams
Add octopus board using GLK soc. Copied base code from mainboard/intel/glkrvp. TODO: Fix as per octopus schematic. Change-Id: Ic8c25b3fafbfef31b8b3b802acb3bc53ee7146b6 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/23685 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-14mb/*/spd: Use normal binary numbers (0b0010) instead of special format (2b0010)Jonathan Neuschäfer
This format (one hex digit, followed by 'b', followed by binary digits) is arguably useful, but also confusing. Use the more common format instead. Change-Id: Ide7b0a999483a2dd863a70f8aa42cd0865e2babf Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/23715 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2018-02-13mb/google/poppy: Fix the SPD for samsung_dimm_K4A8G165WBFurquan Shaikh
Original SPD provided by the vendor had bytes after 254 shifted by 16 bytes. This change fixes the SPD data based on the latest details received from the vendor. BUG=b:72749394 TEST=Verified that the device with this memory part boots to OS fine. Also, mosys is able to dump the right memory information. Change-Id: I6938dea761c5785048aad69eeeaf50e2d0fa8ca1 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/23729 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-12mainboard/google/zoombini/variants/meowth: enable touchscreenNick Vaccaro
BUG=b:69011806, b:72179988 BRANCH=master TEST=Verify touchscreen on meowth works with this change. Change-Id: Iad3f0b77a02552266435e523fdbb74b14ada101a Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/23551 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2018-02-12google/kahlee: Select HAVE_ACPI_RESUMEMarshall Dawson
TEST=Run powerd_dbus_suspend and resume with button press BUG=b:69614064 Change-Id: I0a5a610590b599b96dd0def211c4aa31c7a538ea Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22732 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-12google/snappy: enhance BigDaddy USB#2 2.0 strengthKevin Chiu
Fine tune 14" BigDaddy USB#2 2.0 strength: PERPORTPETXISET: 7 PERPORTTXISET: 1 IUSBTXEMPHASISEN: 3 PERPORTTXPEHALF: 0 this value could have USB#2 2.0 EA/function pass. BUG=b:72922816 BRANCH=reef TEST=emerge-snappy coreboot Change-Id: I0ea1b966b7c02c95bf0ea1138a5629fd3b576439 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/23649 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-11mb/google/fizz: Set SATA GPIOs in bootblockShelley Chen
Previously, we were seeing device boot into the recovery screen with error code 0x5a. This was root caused to the SATA GPIOs (specifically DEVSLP) not being initialized early enough, causing the SATA 1 link detection to time out and the device to reboot into recovery with 0x5a instead of booting into the OS as usual. BUG=b:69715162 BRANCH=None TEST=after flashing BIOS, set gbb flags to 0, then type reboot from the OS. Change-Id: I53913d5b7adaeb43edd0ef2d24a7cad92052d68a Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/23647 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kane Chen <kane.chen@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-02-10mb/google/poppy/variants/nautilus: set oem_id, oem_table_id fields of ↵Naveen Manohar
acpi_header_t This change makes the Nautilus platform update the two fields: *oem_id* and *oem_table_id*, if the Maxim codec is detected. Change is made to correct the audio topology file name that is being read from oem_id fields, loaded and displayed in dmesg. BUG=b:68686020 TEST=Build, booted nautilus board. Verified kernel reads new strings. Change-Id: I041f2838f07a2525be7a28fdc69b7f1af46d16f1 Signed-off-by: Naveen Manohar <naveen.m@intel.com> Reviewed-on: https://review.coreboot.org/23648 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-02-10mainboard/google/meowth: Enable ECT againLijian Zhao
Previously ECT was disabled in commit 22401, on D0 stepping system and FSP version 7.x.20.52, disabling ECT will cause memory training failure and the system is stuck at post code 00D5h. BUG=b.72473063 TEST=Apply patch and build coreboot image, flash into meowth P0 system with D0 stepping silicon installed, system can pass memory training and boot up into OS. Change-Id: I7dd0a7dfe2993ad9cfaf00050175e5a47468b471 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/23645 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2018-02-10mb/google/poppy/variants/nami: set oem_id, oem_table_id fields of acpi_header_tKaiyen Chang
This change makes Nami platform update the two fields: *oem_id* and *oem_table_id*, if the Maxim codec is detected. Change is made to correct the audio topology file name that is being read from oem_id fields, loaded and displayed in dmesg. BUG=b:70646770 TEST=Verify kernel reads new strings. Change-Id: I513a997f312e2d37d76da0379feb017d1f591f9a Signed-off-by: Kaiyen Chang <kaiyen.chang@intel.com> Reviewed-on: https://review.coreboot.org/23670 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-02-10mb/google/grunt: Add ADAU7002 to devicetreeDaniel Kurtz
Add an entry to the grunt devicetree defining the ADAU7002 PDM-to-I2S converter. BUG=b:72121803 TEST=With grunt audio kernel patches, "aplay -l" shows playback devices: **** List of PLAYBACK Hardware Devices **** card 0: acpd7219m98357 [acpd7219m98357], device 0: Playback da7219-hifi-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: acpd7219m98357 [acpd7219m98357], device 2: HiFi Playback HiFi-2 [] Subdevices: 1/1 Subdevice #0: subdevice #0 Change-Id: I90b59ec64f4b841932db42b8a8970ed924283613 Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/23660 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-02-10mb/google/kahlee: Add grunt audio codecs to devicetreeDaniel Kurtz
Remove manually written asl entries for grunt's DA7219 and MAX98357A audio codecs, and replace them with equivalent devicetree entries. BUG=b:72121803 TEST=With grunt audio kernel patches, "aplay -l" shows playback devices: **** List of PLAYBACK Hardware Devices **** card 0: acpd7219m98357 [acpd7219m98357], device 0: Playback da7219-hifi-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: acpd7219m98357 [acpd7219m98357], device 2: HiFi Playback HiFi-2 [] Subdevices: 1/1 Subdevice #0: subdevice #0 Change-Id: Ia658c54a28a5363aabb4c50478adaca1f46d166a Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/23658 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-02-08mb/google/poppy/variants/nami: Revise AC/DC loadlinesGaggery Tsai
This patch revises AC/DC loadlines from VRTT reports. +----------------+-------+-------+-------+-------+ | Domain/Setting | SA | IA | GTUS | GTS | +----------------+-------+-------+-------+-------+ | AcLoadline | 11 | 2.4 | 3.1 | 3.1 | | DcLoadline | 10 | 2.46 | 3.1 | 3.1 | +----------------+-------+-------+-------+-------+ BUG=b:72351128 b:72129954 BRANCH=None TEST=emerge-nami coreboot chromeos-bootimage & ensure the settings are passed to FSP. Change-Id: Ib8aeb82973c42723d7b623967f8085c8f1d926eb Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/23635 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-02-07mb/google/fizz: Set Pmax to 120 for all SKUsShelley Chen
The Pmax is calcuated from MAX(Psku1, Psku2), where Psku1, Psku2 are estimated Pmax power of U42 and U22 skus. For U42 sku, the Pmax is PL4 (71W) + ROPmax (49W) = 120W; for U22 SKU, the Pmax is PL4 (43W) + ROPmax (49W) = 92W. So Pmax is set to MAX(120W, 92W) = 120W. BUG=b:71594855 BRANCH=None TEST=Make sure correct pmax value is being passed into fsp Change-Id: Ic27fef87c869094b20438e6ee0e1eb0b35122b8d Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/23633 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Chris Ching <chingcodes@chromium.org>
2018-02-07google/kahlee/grunt: Fix 2 device specific variablesAkshu Agrawal
* micbias_lvl -> micbias-lvl * mic_amp_in_sel -> mic-amp-in-sel BUG=b:71875600 TEST=Checked in kernel the values are set Change-Id: Ife7e8cdd835cc256cd8265593a94df84a510cebb Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Reviewed-on: https://review.coreboot.org/23603 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-07mb/google/poppy/variants/poppy: Enable EC_ENABLE_SECOND_BATTERY_DEVICENicolas Boichat
BRANCH=none BUG=b:65697620 TEST=Boot lux, both /sys/class/power_supply/BAT0 and BAT1 are present, data is valid. Change-Id: I869bf08341b83f359066709e1e9c03af99482b2c Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Reviewed-on: https://review.coreboot.org/23599 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-02-07mb/google/poppy/variants/nami: Change WiFi wake pin to GPP_E22Furquan Shaikh
This change updates the WiFi device wake pin to GPP_E22 from WAKE# (to match the latest schematic changes). Since WiFi was the only device using WAKE# pin, DSX_EN_WAKE_PIN is removed from deep_sx_config as well. BUG=b:72697650 TEST=Verified: 1. Wake-on-wifi works. 2. Device is able to enter G3 without WAKE# pin causing unwanted wakes from deep S5. Change-Id: Ibde81f73cca322f9b8b45baf8ee18ae00521467d Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/23594 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-06google/gru: Add another 512KB to the COREBOOT FMAP regionJulius Werner
With the new extra detachable UI elements, we're running out of space in Scarlet's RO CBFS. Thankfully, the GBB is still massively overdimensioned, so we can steal another half MB from there. This patch changes the FMAP for some boards that have already had production firmware releases. However, all the new changes are to the RO parts of the FMAP, so there shouldn't be a way this could cause a problem for updates. Change-Id: Iec182de3e894e56fec2a64b034c0ca65d78a5522 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/23595 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-02-06mb/google/kahlee: Fix grunt I2C rise/fall timesJustin TerAvest
I2C bus rise/fall times were measured as follows. Signals were generated with: - bus 0: manual i2c driver in depthcharge - bus 2,3: i2cdetect -r <bus_number> and then measured manually with an oscilloscope. BUG=b:72442912 Change-Id: I291e144249271ec34a93417398e54e68b8e21e23 Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/23520 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-02-06mb/google/kahlee: Remove cmos.layoutRichard Spiegel
CMOS layout is not used and can be removed. A change to Kconfig is needed in order not to break the build. BUG=b:64207749 TEST=Build kahlee. Change-Id: Ib5d18e80a56111d96c730420db865194c71de1b3 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/23596 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-02-06mb/google/eve: Enable HotPlug on PCIe root port for WiFiDuncan Laurie
Enable HotPlug for the PCIe root port that the WiFi device is on so the OS can re-train the link without needing a reboot if it goes down unexpectedly at runtime. BUG=b:72417777 TEST=enable HotPlug on Eve Root Port 0 (WiFi) and check in linux that it is identified as a HotPlug capable root port. Change-Id: Id2b7fc92c8c9128f0e28102eb5991bda7fbf6799 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/23512 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-06google/kahlee: Initialize non-early i2c buses in mainboard_initDaniel Kurtz
Initialize non-early i2c buses in ramstage. BUG=b:69407112 TEST=Boot depthcharge w/ CLI enabled on grunt. devbeep => plays beep BRANCH=None Change-Id: I634a7a823cc393243841dbd55e52abe3f0e72c5a Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/23554 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-02-06mb/google/fizz: Determine PsysPl3 and Pl4 valuesShelley Chen
Pass in fizz-specific adapter-based PsysPl3 and Pl4 values to avoid brownouts. According to Intel doc #560604, page 74, the max time window is 64ms (code=6) and the min duty cycle we can set is 4%. BUG=b:71594855 BRANCH=None TEST=Boot to OS and check MSRs using iotools for expected values Change-Id: I06a4c5bc25f6ec036b79f6941f80e26058d64930 Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/23528 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-02-06mb/google/nautilus: Work around the power issue of MIPI and USB camerasAndy Yeh
On EVT, the USB and MIPI cameras share the same power source. As a result, when the MIPI camera driver turns off the camera once probed, USB camera will be disconnected. To make USB camera work on EVT devices, we will need a hack in coreboot to leave the camera power always-on. BUG=b:72839352 TEST: Verified the MIPI and USB camera function on DUT board TODO: This power issue will be fixed on DVT build. Will revert this patch once confirmed power sources for MIPI and USB camera could be supplied individually. Change-Id: Icaaf7e17447492f2e2f2d03eb9a35bcc53667f28 Signed-off-by: Andy Yeh <andy.yeh@intel.com> Reviewed-on: https://review.coreboot.org/23546 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Andy Yeh
2018-02-05mb/google/fizz: Get OEM ID and SKU ID from ECDaisuke Nojiri
This patch makes coreboot fetch OEM ID and SKU ID from EC. If it fails, it falls back to GPIO pins. BUG=b:70294260 BRANCH=none TEST=Verify AP log shows expected OEM ID and SKU ID on Fizz. Change-Id: I06d3a205275b46660b3974bc3673d4be8e13f6d1 Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/23548 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-26 08:38:36 +0000