summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Expand)Author
2018-03-07mb/google/poppy/variants/nami: Add spd filesShelley Chen
2018-03-06google/snappy: enhance CCD type-A USB 2.0 phy strengthKevin Chiu
2018-03-06mainboard/google/fizz: Check HDMI HPD and DisplayPort HPDDaisuke Nojiri
2018-03-06mb/google/fizz: Skip FSP init for UART 0Duncan Laurie
2018-03-06Revert "mainboard/google/meowth: enable PCH iSCLK"Lijian Zhao
2018-03-05mb/google/poppy: Allow use of optional secondary SPDFurquan Shaikh
2018-03-05mb/google/poppy/variants: Set pch_trip_temp to 75CFurquan Shaikh
2018-03-02sb/intel/common: Fix conflicting OIC register definitionNico Huber
2018-03-02mb/google/zoombini/variants/meowth: Enable NVMeBora Guvendik
2018-03-02mainboard/google/zoombini/variant/meowth: enable speed shiftNick Vaccaro
2018-03-01mb/google/reef/sand: Override USB2 phy settingsKatherine Hsieh
2018-03-01mainboard/google/meowth: Turn on DBC over USB3.0Lijian Zhao
2018-03-01mb/google/poppy/variant/nautilus: Change SlowSlewRateForSa settingSeunghwan Kim
2018-03-01mb/google/reef: Override USB2 phy settingsTim Chen
2018-03-01mb/google/coral: add usb2 phy setting override for some variantsSheng-Liang Pan
2018-03-01mb/{amd/gardenia,google/kahlee}: Initialize GPIOs earlierJustin TerAvest
2018-02-28mainboard/google/zoombini: consolidate SPD makefilesNick Vaccaro
2018-02-28mb/google/poppy/variants/nami: Enable elan touchscreenCrystal Lin
2018-02-28mb/google/octopus: Add LPDDR4 memory initRavi Sarawadi
2018-02-27sb/intel/{bd82x6,ibexpeak}: Move RCBA macros to a common locationArthur Heymans
2018-02-26mainboard/google/zoombini: enable 4 coresNick Vaccaro
2018-02-23mb/google/fizz: Enable PCIe port 11, 12Zhongze Hu
2018-02-22mb/google/kahlee/mainboard.c: Fix mainboard_picr_dataRichard Spiegel
2018-02-22mb/google/kahlee: Use GPIO macros for baseboardJustin TerAvest
2018-02-22mb/google/kahlee: Correct bad gpio entryJustin TerAvest
2018-02-22mainboard/google/meowth: enable PCH iSCLKLijian Zhao
2018-02-22mainboard/google: Disable big, pit, and ryu ec buildsMartin Roth
2018-02-22mainboard/google/zoombini: Add config for meowth audioSathyanarayana Nujella
2018-02-21mainboard/google/kahlee: Add tis_plat_irq_statusChris Ching
2018-02-20mb/google/poopy/variants/nami: Add Pmax settingGaggery Tsai
2018-02-20mb/google/kahlee/OemCustomize.c: Disable bank interleaveRichard Spiegel
2018-02-17mb/google/fizz: Wait until display is readyDaisuke Nojiri
2018-02-17soc/amd/stoneyridge: Normalize GPIO initJustin TerAvest
2018-02-16mb/google/{soraka,poppy,nautilus}: Set psys_pmax to 45WNaresh G Solanki
2018-02-16mb/google/zoombini/variants/meowth: enable FPMCU interruptVincent Palatin
2018-02-16google/gru: Fix GPIO_WP pull and polarity for ScarletJulius Werner
2018-02-15mb/google/poppy/variant/nautilus: Enable and configure DPTFSeunghwan Kim
2018-02-15mb/google/octopus: Add new boardHannah Williams
2018-02-14mb/*/spd: Use normal binary numbers (0b0010) instead of special format (2b0010)Jonathan Neuschäfer
2018-02-13mb/google/poppy: Fix the SPD for samsung_dimm_K4A8G165WBFurquan Shaikh
2018-02-12mainboard/google/zoombini/variants/meowth: enable touchscreenNick Vaccaro
2018-02-12google/kahlee: Select HAVE_ACPI_RESUMEMarshall Dawson
2018-02-12google/snappy: enhance BigDaddy USB#2 2.0 strengthKevin Chiu
2018-02-11mb/google/fizz: Set SATA GPIOs in bootblockShelley Chen
2018-02-10mb/google/poppy/variants/nautilus: set oem_id, oem_table_id fields of acpi_he...Naveen Manohar
2018-02-10mainboard/google/meowth: Enable ECT againLijian Zhao
2018-02-10mb/google/poppy/variants/nami: set oem_id, oem_table_id fields of acpi_header_tKaiyen Chang
2018-02-10mb/google/grunt: Add ADAU7002 to devicetreeDaniel Kurtz
2018-02-10mb/google/kahlee: Add grunt audio codecs to devicetreeDaniel Kurtz
2018-02-08mb/google/poppy/variants/nami: Revise AC/DC loadlinesGaggery Tsai
2018-02-07mb/google/fizz: Set Pmax to 120 for all SKUsShelley Chen
2018-02-07google/kahlee/grunt: Fix 2 device specific variablesAkshu Agrawal
2018-02-07mb/google/poppy/variants/poppy: Enable EC_ENABLE_SECOND_BATTERY_DEVICENicolas Boichat
2018-02-07mb/google/poppy/variants/nami: Change WiFi wake pin to GPP_E22Furquan Shaikh
2018-02-06google/gru: Add another 512KB to the COREBOOT FMAP regionJulius Werner
2018-02-06mb/google/kahlee: Fix grunt I2C rise/fall timesJustin TerAvest
2018-02-06mb/google/kahlee: Remove cmos.layoutRichard Spiegel
2018-02-06mb/google/eve: Enable HotPlug on PCIe root port for WiFiDuncan Laurie
2018-02-06google/kahlee: Initialize non-early i2c buses in mainboard_initDaniel Kurtz
2018-02-06mb/google/fizz: Determine PsysPl3 and Pl4 valuesShelley Chen
2018-02-06mb/google/nautilus: Work around the power issue of MIPI and USB camerasAndy Yeh
2018-02-05mb/google/fizz: Get OEM ID and SKU ID from ECDaisuke Nojiri
2018-02-05google/lars: Turn on keyboard backlight in romstageJenny TC
2018-02-05google/lars,lili: Update GPIO mappingdavid
2018-02-05google/lars: Update the MAINBOARD_FAMILY string in KconfigDuncan Laurie
2018-02-05google/lars,lili: Update SPD DataMatt DeVillier
2018-02-05google/lars: Add sdmode-delay property for max98357aMatt DeVillier
2018-02-05google/lars: update device properties for Nuvoton codecMatt DeVillier
2018-02-05google/lars,lili: Set new thermal parametersdavid
2018-02-05google/lars: Update DPTF settingdavid
2018-02-05mb/google/kahlee: Enable wlan card so it can be detectedMartin Roth
2018-02-02google/gru: Use newer version of Innolux P097PFG panel init codeLin Huang
2018-02-02mb/google/kahlee/mainboard.c: Create mainboard_pirq_dataRichard Spiegel
2018-02-01mb/google/kahlee: always load and run display opromAaron Durbin
2018-01-31mb/google/kahlee: Add grunt cr50 supportJustin TerAvest
2018-01-31mb/google/kahlee: Add grunt trackpad in devicetreeJustin TerAvest
2018-01-31mb/google/poppy/variants/nautilus: Add gpio-keys ACPI node for PENHFurquan Shaikh
2018-01-30mainboard/google/zoombini/variant/meowth: enable FCAM_PWR_ENNick Vaccaro
2018-01-30mainboard/google/zoombini/variant/meowth: fix SPD issuesNick Vaccaro
2018-01-30mainboard/google/zoombini/variants/meowth: enable I2C bus #2Nick Vaccaro
2018-01-30mainboard/google/zoombini/variants/meowth: Add rev 2 gpio changesNick Vaccaro
2018-01-30mainboard/google/zoombini/variants/meowth: Fix USB OC settingsNick Vaccaro
2018-01-30mb/google/poppy/variants/soraka: Update _PSV for TCPUFurquan Shaikh
2018-01-30mb/google/poppy/variants/soraka: Enable mode-aware DPTFFurquan Shaikh
2018-01-30chromeec: Decouple EC tablet event and TBMC deviceFurquan Shaikh
2018-01-30mb/google/kahlee: correct comments in baseboard gpio.cAaron Durbin
2018-01-30mb/google/kahlee: mark h1 bus as early init for gruntAaron Durbin
2018-01-29google/scarlet: Add initialization sequence for Innolux P097PFG panelLin Huang
2018-01-29rockchip/rk3399: Support LONG_WRITE type in MIPI DSILin Huang
2018-01-29google/fizz: Adjust PL2 and PsysPl2 values for power lossShelley Chen
2018-01-29mb/google/kahlee: Fix I2C bus 1 timing for GruntJustin TerAvest
2018-01-26mb/*/*/cmos.layout: Fix the values for the console levelArthur Heymans
2018-01-26mb/google/poppy/variants/soraka: Configure unused pins as NCFurquan Shaikh
2018-01-26mb/google/poppy/variants/nautilus: Update camera power enable GPIOsFurquan Shaikh
2018-01-26mainboard/google/zoombini/variant/meowth: add PCH_WP_ODNick Vaccaro
2018-01-25mb/google/kahlee: Add Grunt touchscreen supportJustin TerAvest
2018-01-25mb/google/kahlee: Add Grunt devicetree i2c bus cfgJustin TerAvest
2018-01-25mb/google/kahlee: Select DRIVERS_I2C_GENERICJustin TerAvest
2018-01-25mb/google/kahlee: Correct grunt HWID in GBBJustin TerAvest
2018-01-25mb/google/poppy/variants/nami: Disable SATAKane Chen