summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Collapse)Author
2019-10-24mb/google/hatch/var/akemi: Update DPTF thermal sensor for AkemiPeichao Wang
Add thermal sensor: TSR2 to ACPI table, monitor CPU temperature BUG=b:143046086 TEST=FW_NAME="akemi" emerge-hatch coreboot chromeos-ec chromeos-bootimage Signed-off-by: Peichao.Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: Id150c5c3cb6d07407fd20417237457b5722e6f2d Reviewed-on: https://review.coreboot.org/c/coreboot/+/36052 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Philip Chen <philipchen@google.com>
2019-10-24mb/google/octopus: Override VBT selection for Dorp/Vortininja/VorticonTony Huang
Add enum for Vorticon sku. Vortininja/Vorticon will load vbt_vortininja.bin Dorp will load vbt_dorp.bin BUG=b:143197918 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage check i915_drrs_status shows DRRS supported NO when SKU-ID sets to Dorp/Vortininja/Vorticon. Change-Id: I67d7a8ab62a1838b0a0a05f532d8b067ece686d9 Cq-Depend: chrome-internal:2026287 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36259 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2019-10-24mb/google/{butterfly,link,parrot}: Drop wrong _ADR objectsElyes HAOUAS
ACPI Version 6.3 Section 6.1: "A device object must contain either an _HID object or an _ADR object, but should not contain both." Found-by: ACPICA 20191018 Change-Id: I8bcdfa7a4dc33c3e3866d3135249a602379b9615 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36265 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-24mb/google/hatch: Select RT1011 and CHROMEOS_DSM_CALIB for HeliosCheng-Yi Chiang
Use RT1011 driver for Helios. Select CHROMEOS_DSM_CALIB to set device properties for RT1011 speaker calibration. BUG=b:140397934 BRANCH=none TEST=On Helios, with patch series, check realtek,r0_calib and realtek,temperature_calib are available to rt1011 codec driver. Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org> Change-Id: I1010be15466c5060aa1d73318393853a2515daac Reviewed-on: https://review.coreboot.org/c/coreboot/+/36030 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-10-22mb/google/hatch: Enable PchPmSlpS0Vm075VSupport for hatchKane Chen
On hatch and variant HW designs supports VCCPRIM_CORE Low Voltage Mode. VCCPRIM_CORE can be down to 0.75v when slp_s0 is asserted. This commit enables PchPmSlpS0Vm075VSupport UPD so that FSP can program related setttings to save power. BUG=b:134092071 TEST=Run suspend_stress_test on kohaku and pass 100 cycles Change-Id: Ia02ff8823883489b36349457213409496f082f36 Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35596 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-10-22google/chell: Update ICC_MAX configurationMatt DeVillier
Correct ICC_MAX values per SKL-Y EDS spec. Adapted from chromium commit 1c4e89e8 [Chell: Update ICC_MAX configuration] Original-Change-Id: Ic660cc6a2d11e995a86a30ddde800d096d93e012 Original-Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/593715 Original-Reviewed-by: Duncan Laurie <dlaurie@google.com> Change-Id: Ia31ce432cf979d574d84e9205a287f87de5de057 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35958 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Michael Niewöhner
2019-10-22mb/google/drallion: Change touch enable pin default valueEric Lai
Change GPP_B21 default to low. This can prevent power leakage of non-touch sku. BUG=b:142849034 BRANCH=N/A TEST=Measure the power of non-touch sku, check GPP_B21 is 0V. Boot up with touch sku and check touch functional. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I80a3e5dc224e4dab97c21fd469d8c3f2d3e774e0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/36195 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mathew King <mathewk@chromium.org> Reviewed-by: Roy Mingi Park <roy.mingi.park@intel.com>
2019-10-22mb/mainboard/hatch: support Goodix touch panel for AkemiPeichao Wang
Configure enable pin GPP_D9 pull high when active BUG=b:143046441 TEST=build bios and verify touch screen works fine Signed-off-by: Peichao.Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I83060f31d4d22c9be05bba119816c6aa66e4126c Reviewed-on: https://review.coreboot.org/c/coreboot/+/36186 Reviewed-by: Philip Chen <philipchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-22mb/google/octopus: Override VBT selection for BloogletTony Huang
Share the same vbt_blooguard.bin to disalbe DRRS support. BUG=b:143045247 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage check i915_drrs_status shows DRRS supported NO when SKU ID is blooglet. Change-Id: Ia180f265080f801a09f10ce8a8b520c47f218775 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36190 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2019-10-21mb/google/glados: port to FSP 2.0Michael Niewöhner
This patch is part of the patch series to drop support for FSP 1.1 in soc/intel/skylake. The following modifications have been done to migrate the board(s) from FSP 1.1 to FSP 2.0: - remove deprecated devicetree VR_RING domain (only 4 domains in FSP 2.0) - switch to using the FSP default VBT TODO: - testing Change-Id: Id747ef484dfdcb2d346f817976f52073912468d0 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-21src/{device,drivers,mb,nb,soc,sb}: Remove unused 'include <console/console.h>'Elyes HAOUAS
Change-Id: I0c965e598e260ff8129aa07fb9fc5bf6e784e1d8 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36057 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-10-21mb/google/hatch/var/dratini: Add ELAN touchscreen supportWisley Chen
Add ELAN EKTH6915 USI touchsreen support. BUG=b:139392144 TEST=check touchscreen work, and confirmed power sequence with vendor. Change-Id: I8ebc067bbb407498de00ea0b6c23b0848023cffe Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36125 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-21google/poppy: add VBT for nautilus variantMatt DeVillier
Add data.vbt and modify Kconfig appropriately; allows use of FSP/GOP display init. VBT extracted from stock ChromeOS firmware. Change-Id: I8a2d093ad96f72fb420b94aafa790e3ba900d905 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36106 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-10-21mb/google/hatch/akemi: disable unused devices for AkemiPeichao Wang
Akemi unused devices declare: - I2C #1 gpio_keys - close I2C #3 - close GSPO #1 BUG=b:142800988 TEST=Reboot stress test and suspend stress test, the DUT will be able to working properly Signed-off-by: Peichao.Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: Ibff1446ccb213abce1a2ae19718774d9d6737cc9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/36086 Reviewed-by: Ben Kao <ben.kao@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-20src: Remove unused 'include <string.h>'Elyes HAOUAS
Change-Id: I2a94c3b6282e9915fd2b8136b124740c8a7b774c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36082 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-10-18mb/google/octopus: Create Dood variantTim Chen
This commit creates a dood variant for Octopus. The initial settings override the baseboard was copied from variant bobba. BUG=b:141960652 BRANCH=octopus TEST=emerge-octopus coreboot Change-Id: Id8852e1f04f4356fac5445f6da6d56d430c88ad0 Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35768 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2019-10-18mb/google/hatch/var/dratini: Update DPTF parametersWisley Chen
The change applies the DPTF parameters. BUG=b:142849037 TEST=build and verified by thermal team Change-Id: I5da8d373f38d23929ffec95bc1c9e942f131297f Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36098 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-10-18mb/google: Shrink GBB section sizeHung-Te Lin
Chrome OS firmware images have moved bitmap resources from GBB into CBFS for a long time, so the GBB should only hold firmware keys and HWID, that is usually less than 10k. ARM boards usually limit GBB to 0x2f00 (see gru, cheza and kukui) but many recent x86 simply copy from old settings and may run out of space when we want to add more resources, for example EC RO software sync. Note, changing the GBB section (inside RO) implies RO update, so this change *must not* be cherry-picked back to old firmware branches if some devices were already shipped. BRANCH=none BUG=None TEST=make # board=darllion,hatch,kahlee,octopus,sarien Change-Id: I615cd7b53b556019f2d54d0df7ac2723d36ee6cf Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36088 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Mathew King <mathewk@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-10-16mb/google/hatch/akemi: Tune I2C bus 1 clockPeichao Wang
Tune I2C bus 1 clock and insure it meets I2C spec. BUG=b:142683257 TEST==flash coreboot to the DUT and measure I2C bus 1 clock frequency less than 400KHz Signed-off-by: Peichao.Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: Id4cdbad4dd9d451763fb536988402d6e6fe3a378 Reviewed-on: https://review.coreboot.org/c/coreboot/+/36050 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-10-16mb/google/hatch/var/dratini: Add enable pin for elan touchscreenWisley Chen
Add enable pin for elan touchscreen BUG=b:142710871 TEST=touchscreen work Change-Id: I09b6ffb962272bfe46e63b057be885b1bdf13554 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36061 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-10-16mb/google/hatch/var/dratini: update goodix power sequenceWisley Chen
Update power sequence to meet spec. BUG=b:142710867 TEST=touchscreen work, and make sure power sequence to meet spec with vendor. Change-Id: I98f8b095374caa8c3540307a51f9d3b69baec905 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36060 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-16mb/google/drallion: Add new SPD file for drallionBora Guvendik
Add the SPD data for MT40A1G16KD-062E:E BUG=b:139397313 TEST=Compile successfully. Change-Id: I3d1ae9269ff3129845a7f53dbacbab6e1b66b6d5 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35945 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2019-10-16mb/google/octopus: Override VBT selection for BlooguardTony Huang
Disable DRRS on Blooguard SKU - 49, 50, 51, 52 BUG=b:142632381 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage check i915_drrs_status shows DRRS supported NO when SKU ID is blooguard. Cq-Depend: chrome-internal:1983227 Change-Id: I36a313fd2beacb878da7383f733e206067c1c0fb Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36015 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2019-10-16sb/intel/bd82x6x/lpc: Set up default LPC decode rangesArthur Heymans
This sets up some common default LPC decode ranges in a common place. This may set up more decode ranges than needed but that typically does not hurt. Mainboards needing additional ranges can do so in the mainboard pch_enable_lpc hook. Change-Id: Ifeb5a862e56f415aa847d0118a33a31537ab8037 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33549 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-10-16intel/broadwell: Implement proper backlight PWM configNico Huber
Port the backlight-PWM handling from Skylake instead of the previously used Haswell version. We use a 200Hz PWM signal for all boards. Which is higher than the previous devicetree value, 183Hz, but that was over- ridden by the VBIOS anyway. 200Hz is still very low, considering LED backlights, but accurate values are unknown at this time. Lynx Point, the PCH for Haswell and Broadwell, is a transition point for the backlight-PWM config. On platforms with a PCH, we have: o Before Lynx Point: The CPU has no PWM pin and sends the PWM duty-cycle setting to the PCH. The PCH can choose to ignore that and use its own setting (BLM_PCH_OVERRIDE_ENABLE). We use the CPU setting on these platforms. o Lynx Point + Haswell: The CPU has an additional PWM pin but can be set up to send its setting to the PCH as before. The PCH can still choose to ignore that. We use the CPU setting with Haswell. o Lynx Point + Broadwell: The CPU can't send its setting to the PCH anymore. BLM_PCH_ OVERRIDE_ENABLE must always be set(!) if the PCH PWM pin is used (it virtually always is). We have to use the PCH setting in this case. o After Lynx Point: Same as with Broadwell, only BLM_PCH_OVERRIDE_ENABLE is implied and the bit not implemented anymore. Change-Id: I1d61d9b3f1802ebe18799fc4d06f1f1d3b54c924 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35897 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-10-15helios: Add TEMP_SENSOR4 to DPTFPaul Fagerburg
Helios adds TEMP_SENSOR4 to the EC ADC2 pin. Add this to the DPTF. BRANCH=None BUG=b:142266102 TEST=`emerge-hatch coreboot` Verify that Helios builds correctly. Change-Id: I3bc19f9b9bd644e134987749ad9a4d875ad8b40a Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35920 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2019-10-15mb/google/hatch: set wifi sar for dragonairWisley Chen
Enable wifi sar feature and set wifi sar name for dragonair sku. BUG=b:142109545 TEST=emerge-hatch coreboot chromeos-bootimage 1. Check wifi_sar-dragonair.hex in /cbfs-rw-raw/dratini 2. Add iwlwifi.debug into kernel params. 3. check SAR value from dmesg only when sku id is 21/22 Change-Id: I0e08610b7c7d2d8da5a749d278bcde26af590e31 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35807 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-10-15mb/google/hatch: Initialize FPMCU_PCH_BOOT1Wisley Chen
FPMCU_PCH_BOOT1 pin is connected to GPP_C12. So, config GPP_C12. BUG=b:142188003 TEST=emerge-hatch coreboot Change-Id: I73a5c3529330ef3e72f4c7d5fcbbd2f6693494d8 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35845 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-11mb/google/hatch: Add new touchscreen option for KohakuTim Wawrzynczak
The next board rev will have a new option for an Elan touchscreen. Add support for this in the devicetree, as well as use the 'probed' property on both touchscreen options. BUG=b:141957731 BRANCH=none TEST=compiles (next board rev not available yet) Change-Id: I135e693304cbb8dffc0caf4c07846033d6802208 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35944 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Shelley Chen <shchen@google.com>
2019-10-10mb/google/octopus/variants/fleex: Update GPIOs to fix EMRJohn Su
Update GPIO_138 and GPIO_139 setting to fix EMR function. BUG=b:141729962,b:141281846 BRANCH=octopus TEST=verify EMR function in Grob360S. Change-Id: I28cef592374fb4aeee2f3d3010cc0e237d62a2fd Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35881 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-10-09soc/mediatek/mt8183: Run DRAM full calibrationHuayang Duan
Load the calibration params from flash first and check the correctness of the params. If the params have correct format, perform DRAM fast calibration with these params to reduce bootup time. Otherwise, load the DRAM blob and perform DRAM full calibration. Bootup time of DRAM partial calibration: - 1,349,385 usecs with low frequency - 924,698 usecs with middle frequency - 1,270,089 usecs with high frequency 3,544,172 usecs in total. Bootup time of DRAM fast calibration: - 216,663 usecs with low frequency - 328,220 usecs with middle frequency - 322,612 usecs with high frequency 867,495 usecs in total. BUG=b:139099592 BRANCH=none TEST=emerge-kukui coreboot Change-Id: I8de29b14b1fb24b3b4f351c855c5c4d8f350cc34 Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35110 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-10-09soc/mediatek/mt8183: Use cached calibration result for faster bootupHuayang Duan
Load calibration params from flash. If the format of the params is correct, use these calibration params for fast calibration to reduce the bootup time. Bootup time of DRAM partial calibration: - 1,349,385 usecs with low frequency - 924,698 usecs with middle frequency - 1,270,089 usecs with high frequency 3,544,172 usecs in total. Bootup time of DRAM fast calibration: - 216,663 usecs with low frequency - 328,220 usecs with middle frequency - 322,612 usecs with high frequency 867,495 usecs in total. BUG=b:139099592 BRANCH=none TEST=Boots correctly on Kukui Change-Id: I9ef4265dd369a1c276bb02294696556df927e7bc Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35164 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-09mb/google/drallion: Enable UART console for arcada_cml and sarien_cmlBernardo Perez Priego
Drallion uses UART 0 for console, other two variants remain as UART 2. BUG=b:139095062 TEST=emerge-drallion coreboot chromeos-bootimage. Console should be visible. Change-Id: I520a07ad6f755bc2e6481329fc69bef9a36e31e2 Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35785 Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Mathew King <mathewk@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-09mb/google/hatch: Remove pen device for dratini/dragonairWisley Chen
Dratini/Dragonair doesn't support pen insertion/ejection feature, so remove it. BUG=b:142159117 TEST=emerge-hatch coreboot Change-Id: I64859a162d8dc75ffe55d98b72a056dd72e8de75 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35844 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Shelley Chen <shchen@google.com>
2019-10-09mb/[google/intel/lenovo]/*: fix posix shell bug with SPD filesGreg V
FreeBSD's sh (basic posix shell) did not interpret the '\%o' escape in the same way bash/zsh do. As a result, the decoded files ended up with ASCII numbers instead of the decoded binary data. Change-Id: I95b414d959e5cd4479fcf100adcf390562032c68 Signed-off-by: Greg V <greg@unrelenting.technology> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35867 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-10-09mb/google/hatch: Set FPS as wake sourceShelley Chen
BUG=b:142131099 BRANCH=None TEST=powerd_dbus_suspend, ensure DUT in S0ix touch fp sensor and ensure DUT wakes up in S0 Change-Id: If57094aa1076d79ac0886b71fa5532411bfeb45f Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35903 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-10-08mb/google/drallion: Add detect pin for Wacom touchscreenFrank Wu
Add the missing detect pin to fix Wacom touchscreen function. BUG=b:140415892,b:138082886 BRANCH=N/A TEST=N/A Change-Id: I8a1b48d4d502945b88e38393383512d30b684fa4 Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35790 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-08mb/google/kohaku: Assign GPP_A19 as reset_gpio of stylusSeunghwan Kim
Applying reset_gpio config of stylus for kohaku. GPP_A19 has been assigned in the latest schematics. We would keep GPP_A10 as output high for old revision devices temporarily. BUG=b:141914474 BRANCH=none TEST=verified stylus works internally Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Change-Id: I61f0f9a4378f47bf455f0726d44beeaf2f67197b Reviewed-on: https://review.coreboot.org/c/coreboot/+/35748 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2019-10-07mb/google/hatch: Preserve MRC training data across FW updateShelley Chen
Add PRESERVE to UNIFIED_MRC_CACHE so that we don't retain the memory training data upon a FW update unless we need to. We have had users complaining that a 15 second memory training upon update makes them believe that their device is not booting, thus many of them hard resetting before bootup. BUG=b:142084637 BRANCH=None TEST=flash RW_SECTION_A, RW_SECTION_B, and WP_RO sections and make sure memory training doesn't occur on following bootup. Change-Id: Ia5eb228b1f665a8371982544723dab3dfc40d401 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35803 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-07mb/google/octopus/variants/fleex: Adjust I2C0 CLK to meet specJohn Su
After adjustment on Grob360S I2C0 CLK: 389.9 KHz BUG=b:141729962 BRANCH=master TEST=emerge-octopus coreboot chromeos-bootimage measure by scope with Grob360S. Change-Id: I6a30257b7978cc8899a55f9fd6ffffe01cb2a851 Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35788 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2019-10-04mb/google/kukui: Extend FMAP to 8MB layoutHung-Te Lin
The SPI flash component requirement for Kukui family is 8M so we should update FMAP for that: - Add more comments for alignment and size recommendation. - Enlarge RO to 4M, and RW_SECTION_{A,B} both ~1.5M. - BOOTBLOCK: 32K->128K, aligned with other ARM boards. - Preserve RW_DDR_TRAINING for new calibration. - Reorder the sections for better alignment. - RW_MISC to contain RW sections that should be merged when creating AU image. BUG=b:134624821 TEST=Built Kukui image and boots. dump_fmap -h image-kukui.bin: # name start end size RW_LEGACY 00700000 00800000 00100000 RW_SHARED 006f7000 00700000 00009000 RW_UNUSED 006f8000 00700000 00008000 SHARED_DATA 006f7000 006f8000 00001000 RW_SECTION_B 00580000 006f7000 00177000 RW_FWID_B 006f6f00 006f7000 00000100 FW_MAIN_B 00582000 006f6f00 00174f00 VBLOCK_B 00580000 00582000 00002000 RW_MISC 00577000 00580000 00009000 RW_ELOG 0057f000 00580000 00001000 RW_DDR_TRAINING 0057d000 0057f000 00002000 RW_NVRAM 0057b000 0057d000 00002000 RW_VPD 00577000 0057b000 00004000 RW_SECTION_A 00400000 00577000 00177000 RW_FWID_A 00576f00 00577000 00000100 FW_MAIN_A 00402000 00576f00 00174f00 VBLOCK_A 00400000 00402000 00002000 WP_RO 00000000 00400000 00400000 RO_VPD 003f8000 00400000 00008000 RO_SECTION 00000000 003f8000 003f8000 RO_FRID 003f7f00 003f8000 00000100 GBB 003f5000 003f7f00 00002f00 COREBOOT 00021000 003f5000 003d4000 FMAP 00020000 00021000 00001000 BOOTBLOCK 00000000 00020000 00020000 Change-Id: Id342d57dc95c6197d05b8a265742a2866c35ae09 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35612 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-10-03mb/[google/intel]/*: Specify Chrome EC bus - LPC or ESPIMartin Roth
Previously all boards using eSPI for the Chrome EC just called it LPC as the code for the chrome EC is the same between the two busses. I'm adding a new Kconfig symbol to specify eSPI, so switch the boards that actually use eSPI to that symbol and add the LPC symbol to all the others. The EC_GOOGLE_CHROMEEC_LPC symbol will no longer default to enabled for x86 platforms, so one symbol or the other needs to be specified for each platform. BUG=b:140055300 TEST=Build tested only. Change-Id: Icf242ca2b7d8b1470feda4e44b47a2cdc20680f2 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35153 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-10-02mb/google/drallion: Disable GBE in firmware for drallion variantsThejaswani Putta
BUG: None TEST: Build successful, checked the CBMEM log if 1f.6 is disabled with this patch Signed-off-by: Thejaswani Putta <thejaswani.putta@intel.corp-partner.google.com> Change-Id: I4e74b259ce8f5f70833dce94692dcbe33e8504db Reviewed-on: https://review.coreboot.org/c/coreboot/+/35509 Reviewed-by: Mathew King <mathewk@chromium.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-02soc/intel: Replace config_of_path() with config_of_soc()Kyösti Mälkki
The previously provided device path made no difference, all integrated PCI devices point back to the same chip_info structure. Change reduces the exposure of various SA_DEVFN_xx and PCH_DEVFN_xx from (ugly) soc/pci_devs.h. Change-Id: Ibf13645fdd3ef7fd3d5c8217bb24d7ede045c790 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35656 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-10-02mb/google/drallion: Dynamicly disable memory channelEric Lai
Disable memory channel by HW strap pin. Using for factory debug. BUG=b:139773082 BRANCH=N/A TEST=Rework HW strap pin and check /proc/mem_info Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ic5f53f0ba3bd432fbcb7513d2a8aa49d42f7a23e Reviewed-on: https://review.coreboot.org/c/coreboot/+/35241 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-02mediatek/mt8183: Rename fields of struct sdram_paramsYu-Ping Wu
Two fields of struct sdram_params are renamed for future CL of DRAM full calibration. Field 'impedance' is also removed. BUG=none BRANCH=none TEST=emerge-kukui coreboot Change-Id: I2f9673fd5ea2e62ee971f0d81bdd12aaf565e31c Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35738 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-30mb/google/drallion: Clean up devicetree configAamir Bohra
* Disable SATA controller and related configs. * Disable PCIe root ports 10 and related configs. -> Board uses integrated CnVi for WLAN * Disable PCIe root ports 12 and related configs. -> Board uses WWAN intarfaced over USB Change-Id: If9d49cef290dcccb114afccc3ac34cd072802ea4 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35723 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-30mb/google/drallion: Configure LPSS controller parametersAamir Bohra
drallion uses below LPSS controllers: I2C: 0/1/4 GSPI: None UART: 0(Console) BUG=b:141575294 Change-Id: I9c57f8054f5da5add667168502ebc3e089c440f8 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35638 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
2019-09-30mediatek/mt8183: Init SPM driverDawei Chien
To support mt8183 power saving during suspend to RAM, this patch loads SPM firmware to support SPM suspend. SPM needs its own firmware to do these power saving in the right timing under correct conditions. After linux PM suspends, SPM is able to turn off power for the last CPU and do more power saving for the SoC such as DRAM self-refresh mode and turning off 26M crystal. BUG=none BRANCH=none TEST=suspend/resume passes for LPDDR4 3200 Change-Id: I3393a772f025b0912a5a25a63a87512454fbc86e Signed-off-by: Dawei Chien <dawei.chien@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34545 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-09-30mb: remove test-only HWIDsHung-Te Lin
The CONFIG_GBB_HWID can be generated automatically now so we can remove the test-only HWIDs set in board config files. BUG=b:140067412 TEST=Built few boards (kukui, cheza, octopus) and checked HWID: futility gbb -g coreboot.rom Change-Id: I4070f09d29c5601dff1587fed8c60714eb2558b7 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35635 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-30mb/google/drallion: Adjust GPD3 pin terminationBora Guvendik
Internal pull up need to be enabled for GPD3 as power button pin for PCH according cometlake pch EDS vol1 section 17-1. Without that pin will stay floating and hook up XDP can cause system shutdown as power buttone event will trigger. BUG=N/A TEST=Hook up XDP on drallion platform, able to boot up into OS and stay at power up state. Change-Id: Idd1befeb14a251b7c0542ca1f99049d07b28fb98 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35666 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-09-30mb/google/drallion: De-assert WWAN reset signalAamir Bohra
BUG=b:141734594 Change-Id: I419f7d11dffebe6c44eefa05750834d07d19857b Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35665 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2019-09-28mb/google/variants/drallion: Update the spd index mapAamir Bohra
BUG=b:141575294 Change-Id: I1b2b4362b84b170bd73b760828ca300ec86c4534 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35636 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2019-09-28mb/google/drallion: Set UART for console to UART controller 0Aamir Bohra
Drallion uses UART 0 for console, change the config accordindly. BUG=b:139095062 Change-Id: I0ae2f8459b6225b99b758180413afa22386355d4 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35633 Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-26mb/mainboard/hatch: support elan touchpad for AkemiPeichao Wang
Modify IRQ pin from D21 to A21 and support wake-up from touchpad BUG=b:141519690 TEST=build bios and verify elan touchpad works fine Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I6cc5b780ffcee24f1f2a04e88c30628ceb5904e8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35551 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-26google/grunt: add new two DDR source for TreeyaPeichao Wang
new DDR particle: 1. Samung K4A8G165WC-BCWE 2. Hynix H5AN8G6NCJR-XNC BUG=b:139085024 BRANCH=master TEST=rework new source to DUT and re-flash bios to DUT and verify DUT will bring up successfully Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I0d039af53938086733308a081a77a7398e7bf5d5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35590 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-09-25mb/google/kukui: Add new build target 'Juniper'Hung-Te Lin
Add the configuration 'Juniper' for the new mainboard. BUG=b:137517228 TEST=make menuconfig; select 'juniper' and build Change-Id: I94e3ac7f6de3fecf177e344cb217eaecf6362d69 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35550 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-09-25mb/google/hatch: Move SOC_INTEL_COMETLAKE selection to KconfigFurquan Shaikh
All variants of hatch are using Comet Lake and so the selection can be done in Kconfig without requiring each variant to do the same. Change-Id: Ief34296334ede5ba0f5f13381e92427ccc440707 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35562 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Andrew McRae <amcrae@chromium.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2019-09-24mb/google/kohaku: Update DPTF parameters and TCC offset settingSeunghwan Kim
This change applies fine-tuned DPTF parameters and TCC offset setting for kohaku. Also enables EC_ENABLE_MULTIPLE_DPTF_PROFILES for tablet mode. BUG=b:137688474 BRANCH=none TEST=built and verified the setting values Change-Id: I92e268b2e07ca5a04e29bda84ddb8fc21eb23251 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35532 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2019-09-22mb/mainboard/hatch: add spd: 8G_3200 for AkemiPeichao Wang
BUG=b:140545732 TEST=build bios and spd index set to 6, verify DUT bring up normally Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I337b0bdcd37a9c4baacccbc6786968031a41b31e Reviewed-on: https://review.coreboot.org/c/coreboot/+/35511 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-22mb/google/hatch: Add G2Touch Touchscreen supportWisley Chen
Add G2Touch Touchscreen support for dratini BUG=b:141281841 TEST=emerge-hatch coreboot chromeos-bootimage, and check touchscreen work. Change-Id: I0dbde7f8396da6335b22aeb4a9703336e2b862b8 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35470 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-09-20mb/google/hatch: Remove GPIO_DRIVER from pen eject GPIO configurationTim Wawrzynczak
A closer read of the EDS indicates that when GPIO Driver mode is selected, GPIO input event updates are limited to GPI_STS only. GPI_GPE_STS updates are therefore masked, and we don't want to enable this behavior. It masks the GPE and does not allow us to see this GPE as a wake source, obscuring the reason that the system woke up. Also switch the IRQ from level-triggered to edge-triggered, otherwise the system will auto-wake from any sleep state when the pen is ejected from the garage. BUG=b:132981083 BRANCH=none TEST=Wake up system from S0ix using pen eject, verify that mosys eventlog shows GPE#8 as the S0ix wakeup source. Wake up system from S3 via pen eject, and verify that the wakeup source shows as GPE#8. Change-Id: If017e12e23134f5cfed7cbb6047cc9badd9bf7e8 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35459 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-20mb/google/hatch: override smbios manufacturer name from CBIWisley Chen
BUG=none TEST=emerge-hatch coreboot, use ectool to write oem name in CBI, and checked smbios manufacturer name. Change-Id: I9be85fbc47031d049b5bd51cfaf6232cab24e9fe Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35345 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-09-19mb/google/drallion: add sku id base on sensor detectionEric Lai
Implementing logic base on sensor detection to determine SKU id. BUG=b:140472369 Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I5e71ae6b97378b78055735bbf4b6b55ffe38b978 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35366 Reviewed-by: Mathew King <mathewk@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-19mb/google/drallion: Add memory init setup for drallionThejaswani Putta
This implementation adds below support 1. Add support to read memory strap 2. Add support to configure below memory parameters -> rcomp resistor configuration -> dqs mapping -> ect and ca vref config Signed-off-by: Thejaswani Putta <thejaswani.putta@intel.com> Change-Id: I9993ad175e6f52711d5a05733aeab1bbed1e0b80 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35141 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2019-09-18mb/google/hatch/variants/helios: Add DPTF control for ambient sensorSumeet Pawnikar
Add DPTF based thermal control for ambient sensor for CML based Helios system. Also, update other sensor names information. BUG=b:139335207 BRANCH=None TEST=Build and Boot on Helios board and check all sensor details. Change-Id: I322d53536fbdf6db70f5a24afb322d9f206eaeac Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35447 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-09-18mb/google/hatch/variants/helios: Update DPTF parametersSumeet Pawnikar
Update DPTF thermal temperature threshold values for CML based Helios system. This updates CPU active cooling temperature threshold to appropriate values which addresses the issue of running the Fan at lower CPU temperature as per bug. Also, added active cooling temperature thresholds for other TSR sensors. BUG=b:141087272 BRANCH=None TEST=Build and boot on Helios board to check the fan functionality. Change-Id: I5c8502f8c9e6121c18024d2a8d5a4f7680797b8d Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35446 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-18mb/google/octopus/variants/garg: add LTE sku to config power sequenceKevin Chiu
Add SKU#18 to config power sequence below: GPIOs related to power sequnce are GPIO_67 - EN_PP3300 GPIO_117 - FULL_CARD_POWER_ON_OFF GPIO_161 - PLT_RST_LTE_L 1. Power on: GPIO_67 -> 0ms -> GPIO_117 -> 30ms -> GPIO_161 2. Power off: GPIO_161 -> 30ms -> GPIO_117 -> 100ms -> GPIO_67 3. Power reset: - keep GPIO_67 and GPIO_117 high and - pull down GPIO_161 for 30ms then release it. BUG=b:134854577,b:137033609 BRANCH=octopus TEST=build Change-Id: I58e07518f6daaf608684c9fa1b1c88fc592ea117 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35442 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-09-18mb/google/drallion: Add SPD files for drallionAmanda Huang
This change adds SPD files for Drallion. Use spd_index matrix to correspond mem_id. This can save the dummy spd index to reduce the size of SPD.bin. BUG=b:139397313 TEST=Compile successfully Change-Id: I2f7e75fdbca4183bcd730e40fef4bfe280ab900b Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35346 Reviewed-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-by: Mathew King <mathewk@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-18mb/google/drallion: Enable 360 sensor detectionBernardo Perez Priego
Implementing logic to detect SKU model and enable ISH accordignly. BUG=b:140748790 Change-Id: I22fafb43dce6545851883be556a02d65a01fc386 Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35303 Reviewed-by: Mathew King <mathewk@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-18mb/google/drallion: Update gpio config for drallionVarun Joshi
Source: Pin Schematics BUG=b:139370304 Signed-off-by: Varun Joshi <varun.joshi@intel.com> Change-Id: I78f85a266eb42ea186ff896db5cde0a347339a71 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35175 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Mathew King <mathewk@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-17google/kukui: Pass reset gpio parameter to BL31Tristan Shieh
To support gpio reset SoC, we need to pass the reset gpio parameter to BL31. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui and ATF(BL31) can get this parameter. Change-Id: Iefa70dc0714a9283a79f97d475b07ac047f5f3b0 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31605 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-09-16src/mainboard: Remove unused include <device/pci_ops.h>Elyes HAOUAS
Change-Id: Icdbccb3af294dd97ba1835f034669198094a3661 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33528 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-16mb/google/kohaku: Update USB port settingsSeunghwan Kim
This change overrides USB port settings for kohaku. Some port settings are same with baseboard, but I'd like to describe all settings here to be aware of current setting and usage of USB ports on kohaku. BUG=none BRANCH=none TEST=built and measured SI of USB ports internally Change-Id: I5ac05485d1cd94416e5a0aecf7fa6769bd7c9e84 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35236 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-09-15src/mainboard: Remove not used #include <elog.h>Elyes HAOUAS
Change-Id: I901cb35488e08f58cdf97f3a8d0f5a8d03560f86 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33729 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-14arm64: Uprev Arm TF and adjust to BL31 parameter changesJulius Werner
This patch uprevs the Arm Trusted Firmware submodule to the new upstream master (commit 42cdeb930). Arm Trusted Firmware unified a bunch of stuff related to BL31 handoff parameters across platforms which involved changing a few names around. This patch syncs coreboot back up with that. They also made header changes that now allow us to directly include all the headers we need (in a safer and cleaner way than before), so we can get rid of some structure definitions that were duplicated. Since the version of entry point info parameters we have been using has been deprecated in Trusted Firmware, this patch switches to the new version 2 parameter format. NOTE: This may or may not stop Cavium from booting with the current pinned Trusted Firmware blob. Cavium maintainers are still evaluating whether to fix that later or drop the platform entirely. Tested on GOOGLE_KEVIN (rk3399). Change-Id: I0ed32bce5585ce191736f0ff2e5a94a9d2b2cc28 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34676 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-09-13mb/google/hatch: Merge emmc_sku_gpio_table and gpio_table to one tablePeichao Wang
BUG=b:140008849, b:140573677 TEST=verify eMMC SKU and SSD SKU will bring up normally. Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I0c0adf569cc92e8b44ab72379420f2b190fa31f5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35344 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2019-09-13mb/google/drallion: Use arcada_ish.bin for arcada_cmlSelma BENSAID
drallion_ish.bin is updated for drallion GPIO changes and not compatible with arcada_cml. TEST=Build and boot arcada_cml Signed-off-by: Selma BENSAID <selma.bensaid@intel.com> Change-Id: Idb35c33425bfd50533df74349dd645db18a65bc5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35347 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2019-09-13mb/google/hatch/var: Increase Goodix touchscreen reset delay to 500msPhilip Chen
Even though GT7375P programming guide rev0.4 only requires a reset delay of 120ms, in practice, we have to increase the reset delay to 500ms, or Goodix FW update would fail. This is a workaround. In the long run, we hope Goodix can fix the power sequence in touch firmware. BUG=b:138795891, b:138796844 TEST=boot helios board and verify Goodix FW update succeeded Signed-off-by: Philip Chen <philipchen@google.com> Change-Id: Ic0049bf240de0a1c7f1b1f39bf155d48bb76fb86 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35350 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-12mb/google/drallion: Update memory mapIvy Jian
This will increase ME region size and reduce the BIOS region size. BUG=b:140665483 TEST='compile successfully' Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Change-Id: I5be2580d280569421d0870a06f9b93124b564b6f Reviewed-on: https://review.coreboot.org/c/coreboot/+/35304 Reviewed-by: Mathew King <mathewk@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-12soc/intel/cnl: Remove unnecessary FSP UPD “PchPwrOptEnable” usageSubrata Banik
PchPwrOptEnable FSP UPD is for internal testing and not really available in externally released FSP source hence assigning this UPD using devicetree config dmipwroptimize doesn't do anything. TEST=Build and boot sarien/arcada. Change-Id: I6da2a088fb697e57d12008fa18bd1764b3da7765 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35323 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2019-09-12mediatek/mt8183: tune EDID for BOE panelPeichao Wang
BUG=b:140545315 TEST=builds Kodama image and verify display working properly Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I52a56f9bbbbef5937a9601f9371e415c74ac9a7c Reviewed-on: https://review.coreboot.org/c/coreboot/+/35317 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2019-09-12mb/google/hatch: Configure SATA DEVSLP pad reset config to PLT_RSTAamir Bohra
BUG=b:133000685 Change-Id: Ia12174e3254153dbca55070f5daf84fd8aac51d0 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35307 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2019-09-11src: Remove unneeded include <arch/interrupt.h>Elyes HAOUAS
Change-Id: I3323d25b72dab2f9bc8a575ba41faf059ee1ffc4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34933 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-09-11mb/google/hatch: Create dratini variantWisley Chen
Create dratini variant BUG=b:140610519 TEST=emerge-hatch coreboot, and boot into chromeos on proto board Change-Id: Ied1240d1be831568e4ab4695b893c3f48821f68b Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35285 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-11mb/google/drallion: enable Elan and Melfas touch panelEric Lai
Drallion uses the same touch panel as Sarien. Copy the deivce from Sarien. BUG=b:140415892,b:138082886 BRANCH=N/A TEST=N/A Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I8e6d2dcf4bd2ed2325137a05811af03692d40342 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35305 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-10mb/google/kukui: Enable MT8183_DRAM_EMCPHuayang Duan
MT8183_DRAM_EMCP is enabled for devices using eMCP to run at a high DRAM frequency (e.g., 3600Mbps). BUG=b:80501386 BRANCH=none TEST=Memory test passes on EMCP platform Change-Id: Icf875427347418f796cbf193070bf047844d2267 Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34433 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-10mb/google/poppy/variant/nocturne: add EC_SYNC_GPIONick Vaccaro
Setup EC_PCH_ARCORE_INT_L, tied to GPP_D17, and define as EC_SYNC_GPIO.. - change GPP_D17 definition to PAD_CFG_GPI_APIC_INVERT as EC_PCH_ARCORE_INT_L is active low - add EC_SYNC_GPIO to the group of chromeos_gpios for use by depthcharge BUG=b:139384979 BRANCH=none TEST="emerge_nocturne coreboot depthcharge chromeos-bootimage", flash & boot nocturne in dev mode, verify that volume up and down buttons work in the dev screen and that the device boots properly into the kernel. Change-Id: Ia43c622710fde8686c60b836fb8318931d79eb61 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35174 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-09-10mb/google/hatch/variants/helios: Modify FPU power on sequenceFrank_Chu
pull in the FPU VDDIO turn on to fix the power leakage problem on FPU VDDIO and FPU CS during power on sequence. BUG=b:138638571 BRANCH=none TEST=emerge-hatch coreboot chromeos-bootimage Signed-off-by: Frank_Chu <frank_chu@pegatron.corp-partner.google.com> Change-Id: I3f6bf3676922e987c2e282b697a2333e2d90289e Reviewed-on: https://review.coreboot.org/c/coreboot/+/34858 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-09-10mb/google/octopus: Add a new sku for meepWisley Chen
Add a new sku4 for meep: sku4: Stylus + no rear camera BUG=b:140360096 TEST=emerge-octopus coreboot Change-Id: Icde7f032c0acf7562b5d5f2c6a8b0c2de91c45b2 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35300 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2019-09-10mb/google/kahlee/treeya: Tune I2C bus 1, 2 and 3 clockPeichao Wang
Tune I2C bus 1, 2 and 3 clock and make them meet spec. BUG=b:140665478 TEST==flash coreboot to the DUT and measure I2C bus 1,2,3 clock frequency less than 400KHz Signed-off-by: Peichao.Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I6b2a51a866e57d13fe528452e4efdcf17a72317f Reviewed-on: https://review.coreboot.org/c/coreboot/+/35298 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-09mb/google/hatch: Distinguish SKU1 and 2 for eMMC and SSD respectivelyPeichao Wang
1. SKU1 for eMMC 2. SKU2 for SSD BUG=b:140008849, b:140573677 TEST=Verify SSD is disabled when SKU ID = 2/4/21/22 Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I827e6f1420801d43e0eb4708b8b8ad1692ef7e9f Reviewed-on: https://review.coreboot.org/c/coreboot/+/35204 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Marco Chen <marcochen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-09lib/spd_bin: Extend DDR4 spd informationEric Lai
From DDR4 SPD spec: Byte 4 (0x004): SDRAM Density and Banks Bits [7, 6]: 00 = 0 (no bank groups) 01 = 1 (2 bank groups) 10 = 2 (4 bank groups) 11 = reserved Bit [5, 4] : 00 = 2 (4 banks) 01 = 3 (8 banks) All others reserved Separate DDR3 and DDR4 banks. And extened capmb, rows, cols and ranks. Separate DDR3 and DDR4 ORGANIZATION/BUS_DEV_WIDTH offset. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I5f56975ce73d8ed2d4de7d9fd08e5ae86993e731 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35206 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-09-09mb/google/drallion: modify USB settingEric Lai
Based on HW schematic to modify USB setting. Drallion has two type C on left and two type A on right. BUG=b:138082886 BRANCH=N/A TEST=N/A Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I925de209635d92ef61ccb9114efebb4b10f30e87 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35283 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mathew King <mathewk@chromium.org>
2019-09-06mb/google/hatch/variants/helios: Update DPTF parameters and TDP PL1/PL2Frank_Chu
Applying first tuned DPTF parameters and TDP PL1/PL2 values for helios. BUG=b:138752455 BRANCH=none TEST=emerge-hatch coreboot chromeos-bootimage Signed-off-by: Frank_Chu <frank_chu@pegatron.corp-partner.google.com> Change-Id: Ic7a96c33ce710c32b57e2ad8066830ff83398c57 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34743 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2019-09-05mb/google/octopus: Set sar file name for meep skuWisley Chen
Set meep sar file name by sku number Cq-Depend: chromium:1768380 BUG=b:138261454, b:118782854 BRANCH=octopus TEST=emerge-octopus coreboot, and check wifi_sar-meep.hex Change-Id: I25aa3080392ce277e537c973088dde569246630e Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35211 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-05mb/google/drallion: modify PCIE settingEric Lai
Based on HW schematic to modify PCIE setting. BUG=b:138082886 BRANCH=N/A TEST=N/A Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ia744a6f3cba76c507c1c43b0a981cb6d89c1a40f Reviewed-on: https://review.coreboot.org/c/coreboot/+/35243 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mathew King <mathewk@chromium.org>
2019-09-05mb/google/octopus: Load custom SAR values by SKU ID for BloogTony Huang
Use sku-id to load the SAR values for Bloog device. BUG=b:138180187 BRANCH=octopus TEST=build and verify load Bloog SAR by sku-id Cq-Depend: chromium:1771477 Change-Id: Id0bc2609fd1c4eaeb380f8f1532ab30d34e2aeb3 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35097 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-09-04mb/google/kahlee/treeya: Update the memory timing table for Treeya to the 2T ↵Peichao Wang
table Rename the table from Liara specific to simply specifying that it's using 2T command rate BUG=139841929 TEST=build and do stress test Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I6e10b95c8aea50e68d8a3b710f30dda4f6b807d3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35116 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-09-04mb/google/kahlee/treeya: override sku_id() functionPeichao Wang
override 'uint32_t sku_id(void)' so that lib_sysinfo.sku_id get a correct value in depthcharge BUG=b:140010592 BRANCH=none TEST=boot treeya board, in depthcharge stage, lib_sysinfo.sku_id print correct value. Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I631f62021e8104a69a43667a811c9c23e3105596 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35214 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Magf - <magf@bitland.corp-partner.google.com> Reviewed-by: Edward Hill <ecgh@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 08:46:52 +0000