summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Collapse)Author
2020-07-26mb/google/volteer/var/terrador: Support ELAN i2c-hid touchpadDavid Wu
Update ELAN i2c-hid touchpad configuration BUG=b:160741785 BRANCH=None TEST=Verify touchpad is working fine. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I098d8a305c6e04af1562a545ff4af6383665798b Reviewed-on: https://review.coreboot.org/c/coreboot/+/43509 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2020-07-26mb/google/kukui: send SKU ID to EC for device-specific configurationHung-Te Lin
For devices sharing same firmware, there may be few customization based on SKU ID - for example being clamshell or form factor. On Kukui and Jacuzzi platforms the SKU ID is defined on AP SOC, so we have to send the information to EC. BUG=b:161767717 TEST=make -j # builds and boots on Juniper BRANCH=kukui Change-Id: I8ffdd9fd1e609c1dd4b0e22dc7aab560ccdc842e Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43788 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26mb/mainboard/dedede: update GPIO table for Botenyan.liu
Adjust GPIO setting to match boten design BUG=b:160741777 BRANCH=NONE TEST=Add gpio.c for boten Signed-off-by: Yan Liu <yan.liu@bitland.corp-partner.google.com> Change-Id: I4eafee608f657f8ec5a06caf6e99b08b3330512b Reviewed-on: https://review.coreboot.org/c/coreboot/+/43277 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26mb/google/dedede: Change HDMI DDC GPIOs to native functionMaulik V Vaghela
HDMI DDC GPIOs were configured as NC till now in waddledoo. This may cause HDMI i2c transfer to break and EDID read will fail due to wrong configuration Configuring these GPIOs as NF in coreboot to fix the issue. BUG=b:160324327 BRANCH=None TEST=HDMI works on DDI2 onn Type-C port Change-Id: If02f062132d7c3b01b07ea9401e81f451df35c3c Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43294 Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26mb/google/vilboz: Tune I2C bus 3 clockpeichao.wang
Tune I2C bus3 frequency and insure it meets I2C spec. BUG=b:161650117 TEST=flash coreboot to the DUT and actual measured I2C bus3 make sure it meet Spec. Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: Ifa9f0bce723f55a12fd2313788c995f8326e3e7d Reviewed-on: https://review.coreboot.org/c/coreboot/+/43661 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26src: Remove unneeded space in license headerElyes HAOUAS
Change-Id: Iac0f0c3d102a9a900ac168f8be907349d9a3dd42 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43565 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26mb/google/dedede/var/drawcia: Add G2Touch touchscreen supportWisley Chen
BUG=b:155002684 TEST=build drawcia, and check touchscreen can work Change-Id: I29a891e07bb3c1d8ebe17666c18bfcf3bc1c361d Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43551 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2020-07-26src: Remove extra lines in license headerElyes HAOUAS
Change-Id: I7378aa7d6156ece3ab3959707a69f45886f86d21 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43593 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26*/mb/google/volteer/**/gpio.h: Fix up license headerAngel Pons
There's a `GPL-2.0-or-later` version of this file in volteer2, so use it in place of these weirdly-licensed files. Change-Id: Icde2f6539d9c726d6967350f74e7bc015e01e7b5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43855 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-07-26skylake boards: Factor out copy-pasted PIRQ routesAngel Pons
Put them in common code just in case something depends on the values. Change-Id: Ief526efcbd5ba5546572da1bc6bb6d86729f4e54 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43851 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26mb/google/zork: remove ACPI_FADT_RESET_REGISTER from fadt_flagsFelix Held
This applies what commit 79572e4f32f844f60338d1aafdba6b94f4111a5c does to the devicetree settings of the zork devices. Change-Id: Ife94818d771f137e56c51ad1598148f60fcf5345 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43820 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26amd/picasso: rework USB2 PHY tune parameter handlingFelix Held
BUG=b:161923068 Change-Id: I67f23c0602e345fbd806e661a4462cf07f93ef64 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43783 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-25soc/amd/picasso: don't apply unconfigured USB2 PHY tune parametersFelix Held
Since FSP pre-populates the UPD struct with the non-zero default values, coreboot shouldn't set them to zero in the case that they aren't configured in the board's devicetree. Since all parameters being zero is a valid case, this patch adds another devicetree option that applying the devicetree settings for the USB2 PHY tuning depends on being set. BUG=b:161923068 Change-Id: I66e5811ce64298b0644d2881420634a8ce1379d7 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43781 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-25soc/intel/tigerlake: Set power limits for Tiger Lake Y-SKUSumeet R Pawnikar
Set power limits in devicetree for Tiger Lake Y-SKU based volteer variant boards. BUG=b:152639350 BRANCH=None TEST=Built and tested power limits on volteer variant board. Change-Id: If4f1226473b48365e5962df9fff29910c99007fc Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43607 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-24mb/google/volteer: Remove unused dptf.asl filesTim Wawrzynczak
In the middle of the Great DPTF Refactor of 2020, new volteer variants were added, but their dptf.asl files are no longer used, so delete them. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I52f2042aa870a29026eb9fe122340ad07654e706 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43828 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2020-07-24mb/google/octopus/variants/garg: update Garfour SKU IDTony Huang
SKUID 51 - Garfour EVT (non-touch, TypeA DB) 52 - Garfour DVT (touch, HDMI DB) BUG=b:161554087 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage Change-Id: I3cb17c2b665c303da210817a531c869c6324b249 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43670 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Henry Sun <henrysun@google.com>
2020-07-23mb/google/zork: Don't expose reset GPIO for touchscreen to OSRaul E Rangel
The Raydium ACPI entry currently provides a reset GPIO and an _ON/_OFF method to the kernel. These are contradictory. The ownership of the GPIO should be mutually exclusive between either the OS or the FW. Since we have two methods exposed this causes the OS to reset the TS twice. Once using the _ON method, and once using the GPIO. Additionally the _ON method is waiting for 20ms after reset while the OS driver uses a 50ms delay. The Raydium TS datasheet specifies 20ms for FW ready time, so the OS driver is adding additional padding. The reference design has a 32ms rise time on the reset line. So without this patch, the OS tries to reset the TS using the _ON method and it waits for 20ms. This is not enough time for the reset line to reach high, let alone account for the FW ready time. The OS driver then tries to reset the device by toggling the GPIO. It waits 50ms which is still 2ms less than required. This CL removes the GPIO from being exported in the _CRS so the OS driver won't try and reset the device. It also increases the reset delay by 32ms to account for the rise time. This isn't a complete fix. I think that the slow rise time is causing some kind of metastability in the TS reset hardware. Using a script to bind and unbind the TS driver, the TS device becomes unresponsive after ~200 iterations. The only way to reset the device is to power cycle. The TS power is also not currently controlled by the power resource. This means that we have no guarantee over when the reset line is toggled. This will lead to issues while spending and resuming. BUG=b:160854397 TEST=Boot trembyle and make sure TS works. Suspend/Resume trembyle 300+ times. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I23131be5d7109eed660a8bd6e2c156c015aa3c4e Reviewed-on: https://review.coreboot.org/c/coreboot/+/43467 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-23mb/google/zork/variants/dalboz: Use HS200 for eMMCEric Peers
Earlier versions of Dalboz did not correctly handle HS400. One fix was to add stitching vias, but these boards did not have them. b/156539551 Another possible fix is to add tuning parameters including drive strength, but that is still a WIP. b/158959725 This should correct OS load failures in the meantime by running the bus slower. BUG=b:158845662 TEST=build, flash, boot sku 0x5a80000c to OS BRANCH=None Signed-off-by: Eric Peers <epeers@google.com> Change-Id: Ia3e7a641bde04c5a7be29bf91c38dd8c110ed17a Reviewed-on: https://review.coreboot.org/c/coreboot/+/43572 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-23zork: Create dirinboz variantKevin Chiu
Create the dirinboz variant of the dalboz reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.1.1). BUG=b:161579679 BRANCH=master TEST=util/abuild/abuild -p none -t google/zork -x -a make sure the build includes GOOGLE_DIRINBOZ Change-Id: I33c03080ffbe0bca61acf4144417b9f5fff6389f Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43601 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2020-07-23mb/google/arcada: Enable bayhub 720 on ArcadaMark Hsieh
Add PCIe-eMMC bridge bayhub 720 on Arcada to the devicetree. BUG=b:157971972 BRANCH=sarien TEST=local build and boot from SATA/PCIe-eMMC storage successfully Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: I7e925730e57806e7398684dffd0d3bd1f4f9deeb Reviewed-on: https://review.coreboot.org/c/coreboot/+/43669 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Mathew King <mathewk@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-23mb/google/sarien: Enable bayhub 720 on SarienIvy Jian
Add PCIe-eMMC bridge bayhub 720 on Sarien. BUG=b:157971972 BRANCH=sarien TEST=local build and boot from storage successfully Change-Id: I28f40a420d51f476487655548f386cfbdc2e5329 Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42740 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Mathew King <mathewk@chromium.org>
2020-07-23mb/google/dedede/var/waddledoo: Configure stop delay for SiS TSKarthikeyan Ramasubramanian
Reset the Touchscreen (TS) and disable the stop GPIO (report switch) at the same time. Add a delay of 100 ms after disabling the stop GPIO. This will ensure the required delay is inserted for both reset and stop disable GPIOs simultaneously. BUG=b:152936541 TEST=Build and boot the waddledoo mainboard. Ensure that the SiS Touchscreen is functional. Change-Id: Icbfb5e07a28ab72b1ff696ad1183a6c2173dcaac Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43453 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Marco Chen <marcochen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-23mb/google/dedede/var/drawcia: Generate SPD ID for supported partsKarthikeyan Ramasubramanian
Add supported memory parts in the mem_list_variant.txt and generate the SPD ID for the parts. The memory parts being added are: H9HCNNNBKMMLXR-NEE K4U6E3S4AA-MGCR BUG=None TEST=Build the drawcia board. Change-Id: Id05c0b2a87b64bfedc761949cbc8ad6cf7dd73a5 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43505 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Marco Chen <marcochen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-23mb/google/zork: Fix Goodix touchscreen ACPI nodeFurquan Shaikh
This change does the following: a. USI_REPORT_EN is no longer set to high in coreboot. Instead GPIO_144 is exposed as stop_gpio in ACPI to allow OS to control this pad as required. b. Appropriate delays are added for power-down sequencing: - Delay after REPORT_EN is disabled - 1ms - Delay after RESET is asserted - 1ms BUG=b:159501288 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: If4d12fa0d4f4e5123d8fdccdabda996dcafa4523 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43701 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-23mb/google/zork/var/morphius: Change hid and desc for Goodix touchscreenFurquan Shaikh
Morphius uses Goodix touchscreen and not G2 touchscreen. This change updates hid and desc properties in devicetree accordingly. BUG=b:159501288 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I2527fa5409bb127ac225c6fb2a5f1bc24895f6cc Reviewed-on: https://review.coreboot.org/c/coreboot/+/43700 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-23mb/google/zork: Drop TODO for GPIO_91Furquan Shaikh
GPIO_91 is added to ACPI using the device tree entry for codec. So, this change drops the TODO from GPIO table. Change-Id: I9c2e91465ab554126531f8512028360ae5fb316d Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43699 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-23mb/google/zork: Configure all pads in ramstage for dalboz referenceFurquan Shaikh
This change configures all missing pads in ramstage for dalboz reference. This ensures that the state of all pads is set correctly for the payload/OS. Also, all the pads for the platform are configured in baseboard gpio table in ramstage to ensure that variants can override any pads if required. BUG=b:154351731 Change-Id: Ia30da908d3827177a7b3594ffba38bff81018ab9 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43698 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-23mb/google/zork: Configure all pads in ramstage for trembyle referenceFurquan Shaikh
This change configures all missing pads in ramstage for trembyle reference. This ensures that the state of all pads is set correctly for the payload/OS. Also, all the pads for the platform are configured in baseboard gpio table in ramstage to ensure that variants can override any pads if required. BUG=b:154351731 Change-Id: Idd827b6a4f995546493596f22249f8699bdf526b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43697 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-23mb/google/zork: Remove unnecessary PULL_UP from early_gpio_tableFurquan Shaikh
This change drops PULL_UP configured on pads in early_gpio table since these pads have external pulls. BUG=b:154351731 Change-Id: Id270e7b4f83dfa942655f513776a3b1c15c9678d Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43696 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-23amd/picasso: rename PCIe descriptor to DXIO descriptorFelix Held
Most of the DXIO descriptors are used to configure PCIe engines and lanes, but on Picasso system some of the DXIO lanes can also be configured as SATA or XGBE ports. Change-Id: I28da1b21cf0de1813d87a6873b8d4ef3c1e0e9dd Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43675 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-23vc/amd/fsp/picasso: add logical to lane number in port descriptor structFelix Held
The lane numbers in the PCIe/DXIO descriptor are the logical and not the physical ones, so add logical to the corresponding field names of the fsp_pcie_descriptor struct. Change-Id: I7037fed225119218e87593932815aff815e83ff8 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43660 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-23mb/google/kukui: Add new configs 'esche' and 'burnet'Kevin Chiu
new boards introduced to Kukui family. esche: clamshell burnet: 360 convertible BUG=b:161768221 BRANCH=master TEST=emerge-jacuzzi coreboot Change-Id: I2245c34533549bb94c58938fee5778b8a03e2767 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43667 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-07-23mb/google/dedede: Enable the CSE Lite SKU for dededeV Sowmya
This patch enables the CSE Lite SKU for the dedede baseboard. BUG=b:160201335 TEST=Build and boot waddledoo with CSE Lite SKU. Cq-Depend: chrome-internal:3142530 Change-Id: I24d7d715d55524807af0127aa4a346a008164b8c Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41818 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2020-07-23mb/google/dedede: Skip the CPU replacement check for dededeV Sowmya
This patches enables the SkipCpuReplacementCheck config for the dedede baseboard to avoid the forced MRC training for all its variants with the soldered down SOC. BUG=b:160201335 TEST=Build and verify CSE Lite SKU on Waddledoo. Cq-Depend: chrome-internal:3142530 Change-Id: I611e66f74a3b9b090ab5e0d836231643d3f919dc Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42930 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2020-07-22mb/google/zork: Modify Woomax variantKane Chen
Update Woomax configuration including GPIO, memory SPD table, I2C devices and USB type C. BUG=b:158343602 BRANCH=None TEST=emerge-zork coreboot Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: I55ba995d9438551d45cb9e17f92b5089ccf4a5fd Reviewed-on: https://review.coreboot.org/c/coreboot/+/43497 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-22mb/google/kukui: revise config structure for Jacuzzi followersHung-Te Lin
There are more Jacuzzi followers coming and we want to have a simplified way of adding new boards. Now, detachable and tablets should select BOARD_GOOGLE_KUKUI_COMMON and clamshells should select BOARD_GOOGLE_JACUZZI_COMMON. BUG=None TEST=make menuconfig; make -j # for kukui, krane, jacuzzi, juniper BRANCH=kukui Change-Id: Ifc1eb6a3792f46c5db6b5346902f1114955b28ae Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43436 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-07-21mb/google/dedede: Create madoo variantIan Feng
Create the madoo variant of the waddledoo reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.1.1). BUG=b:161191394 BRANCH=None TEST=util/abuild/abuild -p none -t google/dedede -x -a make sure the build includes GOOGLE_MADOO Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: I6d3f611606f86036d67be9c8b0fda833ab61ecc1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43440 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-07-21mb/googlz/zork: Drop unnecessary PULL_UPs in variant overridesFurquan Shaikh
This change drops the pulls configured on override GPIOs as they already have external pull-ups. Also, pads which are unused are configured as PAD_NC. BUG=b:154351731 Change-Id: I8da5d51af25bbe2694c21ecb0868c9cc387243cb Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43562 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-07-20google/trogdor: Remove write_protect_stateEric Lai
This is no longer used for chromeos.c. BUG=b:160752610 Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I9a716a88ff9811fff46abca229be15522733bfef Reviewed-on: https://review.coreboot.org/c/coreboot/+/43472 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bob Moragues <moragues@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-07-20sb/intel: Define CONFIG_FIXED_SMBUS_IO_BASEAngel Pons
Make it default to 0x400, which is what the touched southbridges use. Change-Id: I95cb1730d5bf6f596ed1ca8e7dba40b6a9e882fe Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43037 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-07-20mb/google/dedede: Update link frequency and end point structure for OV9734Pandya, Varshit B
1. Update Link frequency to 180 Mhz 2. Set data-lanes to 1 and 3. Update the clock-lane used by sensor BUG=b:155285666 BRANCH=None TEST=Build and able to capture image using user facing camera. Signed-off-by: Pandya, Varshit B <varshit.b.pandya@intel.com> Change-Id: I164cb6af1003de561be8ce640e7653b7bcb3a22f Reviewed-on: https://review.coreboot.org/c/coreboot/+/42679 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2020-07-20mb/google/zork: Delete sleep.aslRaul E Rangel
These methods are empty and the kernel treats these as optional. BUG=b:153001807, b:154756391 TEST=Suspend and resume trembyle Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I5f2b375c1186951f95b7ac44dc7158a0299013a1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43465 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-20mb/google/zork: Drop unnecessary PULL_UPs for dalboz referenceFurquan Shaikh
This change drops internal pulls for dalboz reference configured on pads which already have external pull-ups in hardware. GPIO_0(PWR_BTN_L): Pulled up to PP3300_A GPIO_2(WAKE_L): Pulled up to PP3300_A GPIO_10: Unused. Changed to PAD_NC. GPIO_11(EC_IN_RW_OD): Pulled up to PP3300_A GPIO_12(USI_INT_ODL): Pulled up to PP3300_A GPIO_16(USB_OC0_L): Pulled up to PP3300_A GPIO_17(USB_OC1_L): Pulled up to PP3300_A GPIO_21(EMMC_CMD): Pulled up to PP1800_S0 GPIO_22(EC_FCH_SCI_ODL): Pulled up to PP3300_A GPIO_31(EC_AP_INT_ODL): Pulled up to PP1800_A GPIO_32: Unused. Changed to PAD_NC. GPIO_113(I2C2_SCL): Pulled up to PP3300_S0 GPIO_114(I2C2_SDA): Pulled up to PP3300_S0 GPIO_129(KBRST_L): Pulled up to PP1800_S0 GPIO_92(CLK_REQ0_L): Pulled up to PP3300_S0 GPIO_115(CLK_REQ1_L): Pulled up to PP3300_S0 GPIO_116(CLK_REQ2_L): Pulled up to PP3300_S0 BUG=b:154351731 Change-Id: I62e9dbac7a55efa1e055983a7c126168ee516151 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43555 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-20mb/google/zork: Drop unnecessary PULL_UPs for trembyle referenceFurquan Shaikh
This change drops internal pulls for trembyle reference configured on pads which already have external pull-ups in hardware. GPIO_0(PWR_BTN_L): Pulled up to PP3300_A GPIO_2(WAKE_L): Pulled up to PP3300_A GPIO_10: Unused. Changed to PAD_NC. GPIO_12(USI_INT_ODL): Pulled up to PP3300_A GPIO_16(USB_OC0_L): Pulled up to PP3300_A GPIO_17(USB_OC1_L): Pulled up to PP3300_A GPIO_21(EMMC_CMD): Pulled up to PP3300_A GPIO_22(EC_FCH_SCI_ODL): Pulled up to PP3300_A GPIO_31(EC_AP_INT_ODL): Pulled up to PP1800_A GPIO_90: Unused. Changed to PAD_NC. GPIO_113(I2C2_SCL): Pulled up to PP3300_S0 GPIO_114(I2C2_SDA): Pulled up to PP3300_S0 GPIO_129(KBRST_L): Pulled up to PP1800_S0 GPIO_130(EC_IN_RW_OD): Pulled up to PP3300_S0 GPIO_92(CLK_REQ0_L): Pulled up to PP3300_S0 GPIO_115(CLK_REQ1_L): Pulled up to PP3300_S0 GPIO_132(CLK_REQ4_L): Pulled up to PP3300_S0 BUG=b:154351731 Change-Id: Id84b801e019eede7ef543c24aac968f3ef99b3fd Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43526 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-20mb/google/puff: update USB3 gen2 parametersTim Chen
Based on USB3 gen2 SI report to fine tune the parameters for USB3 gen2. BRANCH=none BUG=b:150515720 TEST=build and check the USB3 gen2 register on DUT is correct. Change-Id: I6ec109871d682a1ae2fa4c22fdd6b87ad8a39e9e Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43482 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jamie Chen <jamie.chen@intel.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-07-18mb/google/dedede: Convert static DPTF ASL into devicetree entriesTim Wawrzynczak
Since there is now a mechanism to generate DPTF ACPI tables and methods at runtime, dedede should switch to using that instead of raw ASL files. This patch converts the existing .asl files into devicetree entries. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I6bb6e6e15f50a1e510080e16bbca09dfc5f16b1a Reviewed-on: https://review.coreboot.org/c/coreboot/+/43422 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-18mb/google/volteer: Update DPTF with temp sensor 3Tim Wawrzynczak
While the DPTF refactor was in progress, TSR3 was added to volteer's dptf.asl file, and I forgot to update the devicetree with TSR3 as well. Also missed a swap in the passive policies of TSR0 and TSR1. This patch fixes those. BUG=b:149722146 TEST=boot volteer, dump SSDT & DSDT, verify TSR3._STA returns 0xF Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I71bc798492ec45bb1e2f8d779e6829db52ef4499 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43528 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Deepika Punyamurtula <deepika.punyamurtula@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2020-07-17mb/google/zork/var/vilboz: Use AMDI1015 HID for I2S machine deviceFurquan Shaikh
Vilboz requires a different HID than rest of the zork variants. Hence, this change sets the HID to AMDI1015 for I2S machine device in vilboz overridetree.cb. BUG=b:157708581 Change-Id: Ibae343f21cf8f0c782dc8a461f69172bf0da7eba Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43545 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-17mb/google/zork: Switch to using newly added i2s_machine_dev driverFurquan Shaikh
This change switches zork devices to use the newly added i2s_machine_dev driver in devicetree rather than passing dmic_select_gpio in SoC config. BUG=b:157708581 Change-Id: I76c633694cbfb454c081ab2a4af4765bfbbae16b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43543 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-17mb/google/zork: Drop mainboard.aslFurquan Shaikh
This change drops mainboard.asl from zork because none of the objects defined in it are used. BUG=b:153879530 Change-Id: If5440bcbce39b4461b44acaec69561663b1ea329 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43519 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-17soc/amd/picasso: Move PMOD global variable to globalnvs.aslFurquan Shaikh
Global variable `PMOD` that stores the interrupt mode used by OS is required by all mainboards. This change moves the variable definition to globalnvs.asl under picasso. Additionally, ACPI spec says that BIOS should assume interrupt mode as PIC until _PIC() method is called by OS. Thus, this change also updates the default value of PMOD as 0 i.e. PIC mode. BUG=b:153879530 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I731c03d965882281a7a23f55894451210ba72274 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43514 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-17mb/google/zork: correct wake gpe value for gpio 9Aaron Durbin
GPIO_9 is associated with gevent 22. Correct all the misconfigurations and use macros for clarity as to what bit offset is being used instead of open coding things. BUG=b:161205804 Change-Id: Ic4cfd62763d72d12a55f89585f24e07df6af0f4f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43516 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-17mb/google/zork: Enable ACP_PME_EN and ACP_I2S_WAKE_ENFurquan Shaikh
This change enables ACP_PME_EN and ACP_I2S_WAKE_EN for dalboz and trembyle boards using devicetree settings. BUG=b:161328042,b:146317284 Change-Id: Ie367a9ba878a1892177df874bbcb8005efeb0880 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43496 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-16soc/amd/picasso: remove unused fadt_pm_profile devicetree settingFelix Held
commit 56da63c3dc3f50cfac541c779b608e1bae9e635c removed overriding that field in the FADT. Change-Id: I0c8ff9ab125129dc856949c47a3a0c14e4109c73 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43417 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-16soc/amd/picasso/acpi,mb/{zork,mandolin}: Stop clearing PciExpWakeStatusRaul E Rangel
The kernel already clears this: https://source.chromium.org/chromiumos/chromiumos/codesearch/+/master:src/third_party/kernel/v5.4/drivers/acpi/acpica/hwregs.c;l=390 No reason to have the firmware do it as well. BUG=b:153001807, b:154756391 TEST=Build Trembyle, boot, suspend, and resume and didn't see any ACPI errors. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ia5c79fb95dc885eaef8abc4257b6ba18c1ef1b66 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43428 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-16soc/amd/picasso,mb/{zork,mandolin}: Remove invalid UPWS variableRaul E Rangel
PMx0EE is not defined in the Picasso PPR. BUG=b:153001807, b:154756391 TEST=None Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I98caf0cd2d0bdcf19de2b945dcf74f5cf7354769 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43424 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-16mb/google/zork: Move variant_pcie_gpio_configure() to bootblockFurquan Shaikh
On zork, bootblock is part of RW firmware in non-recovery mode, so PCIe GPIOs can be configured early on in bootblock rather than waiting until romstage. This change moves the call to variant_pcie_gpio_configure() to happen in bootblock and drops romstage.c file. BUG=b:154351731 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ic515304f35fe5623d58d6000efcb11fb9039e137 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43476 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-16mb/google/zork: Drop variant_romstage_gpio_table()Furquan Shaikh
gpio_set_stage_rom table is now configuring only PCIe related GPIOs in romstage. This change moves the configuration of PCIe related GPIOs to variant_pcie_gpio_configure() to keep all the configuration for WiFi and non-WiFi PCIe pads in one place. It also drops the function variant_romstage_gpio_table() as it is unused. BUG=b:154351731 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ib1c41ba141dce6b52b6e0a250a3aa07c296068aa Reviewed-on: https://review.coreboot.org/c/coreboot/+/43475 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-16mb/google/zork: Drop redundant romstage GPIO tableFurquan Shaikh
Now that the power and reset GPIO configuration for non-PCIe devices is dropped from romstage GPIO table, the tables for pre-v3 and v3 version of schematics are exactly same. So, this change drops the duplicate table and also removes the check for v3 schematics when configuring the pads in romstage. BUG=b:154351731 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I67ca9f587c3f47912393ebaf38badcc9d76cc393 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43474 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-16mb/google/zork: Drop power and reset control in romstage for dalbozFurquan Shaikh
This change drops power and reset control for non PCIe devices in romstage for dalboz reference as this is not required. +---------------------------------------------------------------------------------------+ | GPIO| Net name | External| Internal| Domain| State at reset | State on S3 resume | | # | | Pull | Pull | | | | +---------------------------------------------------------------------------------------+ | 5 | PEN_POWER_EN | 100K PD | PD | S5 | Powered off | Powered on | | | | | | | (because of | (since power is not| | | | | | | internal PD) | disabled when | | | | | | | | entering S3) | +---------------------------------------------------------------------------------------+ | 6 |EN_PWR_TOUCHPAD| 499K PD | PU | S5 | Powered on | Powered on | | | | | | | (because of | (since trackpad | | | | | | | internal PU) | is wake source) | +---------------------------------------------------------------------------------------+ | 68 | EMMC_RESET_L | 100K PU | PD | S0 | Asserted | Asserted | | | | | | | (because of | (because of | | | | | | | internal PD) | internal PD) | +---------------------------------------------------------------------------------------+ | 76 | EN_PWR_CAMERA | 499K PD | PD | S0 | Powered off | Powered off | | | | | | | (because of | (because of | | | | | | | internal PD) | internal PD) | +---------------------------------------------------------------------------------------+ | 140 | USI_RESET | 10K PD | PD | S0 | Deasserted | Deasserted | | | | | | | (because of | (because of | | | | | | | internal PD) | internal PD) | +---------------------------------------------------------------------------------------+ | 141 | USB_HUB_RST_L | 10K PU | PD | S0 | Asserted | Asserted | | | | | | | (because of | (because of | | | | | | | internal PD) | internal PD) | +---------------------------------------------------------------------------------------+ +---------------------------------------------------------------------------------------+ | 67 |EN_PWR_TOUCHPAD| 10K PU | PD | S0 | Powered off | Powered off | | |_PS2 (pre-V3) | | | | (because of | (because of | | | | | | | internal PD) | internal PD) | +---------------------------------------------------------------------------------------+ GPIO_140 starts deasserted out of reset and S3 resume, but gets asserted in ramstage since it is eventually deasserted by OS using ACPI methods. BUG=b:154351731 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ie792a5a9d6420763ff10d1e475c094b6ee514888 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43463 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-16mb/google/zork: Drop power and reset control in romstage for trembyleFurquan Shaikh
This change drops power and reset control for non PCIe devices in romstage as this is not required. +---------------------+--------------------------------------------+--------------------+ | GPIO| Net name | External| Internal| Domain| State at reset | State on S3 resume | | # | | Pull | Pull | | | | +---------------------------------------------------------------------------------------+ | 5 | PEN_POWER_EN | 100K PD | PD | S5 | Powered off | Powered on | | | | | | | (because of | (since power is not| | | | | | | internal PD) | disabled when | | | | | | | | entering S3) | +---------------------------------------------------------------------------------------+ | 13 |EN_PWR_TOUCHPAD| 499K PD | PU | S5 | Powered on | Powered on | | |_PS2 | | | | (because of | (since trackpad | | | | | | | internal PU) | is wake source) | +---------------------------------------------------------------------------------------+ | 68 | EMMC_RESET_L | 100K PU | PD | S0 | Asserted | Asserted | | | | | | | (because of | (because of | | | | | | | internal PD) | internal PD) | +---------------------------------------------------------------------------------------+ | 76 | EN_PWR_CAMERA | 499K PD | PD | S0 | Powered off | Powered off | | | | | | | (because of | (because of | | | | | | | internal PD) | internal PD) | +---------------------------------------------------------------------------------------+ | 140 | USI_RESET | 10K PD | PD | S0 | Deasserted | Deasserted | | | | | | | (because of | (because of | | | | | | | internal PD) | internal PD) | +---------------------------------------------------------------------------------------+ +---------------------------------------------------------------------------------------+ | 67 |EN_PWR_TOUCHPAD| 10K PU | PD | S0 | Powered off | Powered off | | |_PS2 (pre-V3) | | | | (because of | (because of | | | | | | | internal PD) | internal PD) | | | | | | | | | +-----+---------------+---------+---------+-------+----------------+--------------------+ GPIO_140 starts deasserted out of reset and S3 resume, but gets asserted in ramstage since it is eventually deasserted by OS using ACPI methods. BUG=b:154351731 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ieadc62f1a13857209cf0a62f204efb9278e0e97d Reviewed-on: https://review.coreboot.org/c/coreboot/+/43462 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-16mb/google/zork: Keep USI_RST asserted in ramstageFurquan Shaikh
This change keeps USI_RST(GPIO_140) asserted in ramstage since it gets deasserted by OS using ACPI methods. BUG=b:160854397 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I8feced788e471a0efb2358d42b2146df04fb7a0c Reviewed-on: https://review.coreboot.org/c/coreboot/+/43461 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-16mb/google/zork: Keep pen power enabled in sleep stateFurquan Shaikh
This change keeps pen power enabled in sleep state to allow it to charge in S3. BUG=b:155422911 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I6190496653878327f34a01f6a743db474d32e929 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43452 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-16mb/google/kukui: Add new config 'willow'Sheng-Liang Pan
New board introduced to Kukui family. BUG=b:159194582 TEST=None BRANCH=kukui Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: Icc6bcbd006008a05303693e481a54636f0645887 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43318 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-16google/trogdor: Remove GPIO_AP_SUSPEND_LJulius Werner
This pin has been removed from recent revisions (or at least moved to a pin that's not controlled like a normal GPIO). It has also never been used on older ones (I think?). The same GPIO is now used as a SKU ID pin, so make sure we're not incorrectly configuring it as an output (although sku_id() overrides that later anyway, but it's still incorrect). BUG=b:160754995 Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I6e0d56e230d0bef172d7b78cc48263e9b6f059de Reviewed-on: https://review.coreboot.org/c/coreboot/+/43471 Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Philip Chen <philipchen@google.com> Reviewed-by: Bob Moragues <moragues@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-16mb/google/zork: Remove redundant PCI info from overridetreesRob Barnes
This information is redundant since it's already specified in baseboard/devicetree_trembyle.cb or baseboard/devicetree_dalboz.cb domain 0 is still required because sconfig uses it as an identity anchor to match devicetree and overridetree. BUG=b:157580724 TEST=Boot zork, usb functional Change-Id: I3c3c1c2410166b99599d7343fae3ee756f4da321 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43437 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-15mb/google/dedede: Enable SIS touchscreen for WaddledeeKarthikeyan Ramasubramanian
Add SiS9813 USI touchscreen support. BUG=b:160129126 TEST="emerge-dedede coreboot chromeos-bootimage", build successful. Change-Id: I42fdc5e8243d2c70c953b2f516c10f84a041c035 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43304 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Marco Chen <marcochen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-15mb/google/volteer: Enable SATA Port Dito ConfigShaunak Saha
Enable SataPortsEnableDitoConfig for port 1. BUG=b:151163106 BRANCH=None TEST=Build and boot volteer. Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Change-Id: I552faaa0e7172e77208025cf4251bb848cc90709 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42415 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-15mb/google/zork/.../sleep.asl: Remove unnecessary variableRaul E Rangel
There is no reason to create a named variable. We can just return the package. BUG=b:153001807, b:154756391 TEST=None Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I4f8f0362adf5ea5f026d0ba5ac6ac917fa160142 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43423 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-15mainboard: Drop optional and empty ACPI \_BFS methodsAngel Pons
The ACPI specification, version 2.0 says: _BFS is an optional control method. So, remove them. They have been copy-pasted around quite a bit, and do not do anything useful. Plus, it's deprecated in later ACPI versions. Change-Id: I9ef21f231dd6051d410ac3a0fe554908409c2fa7 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43443 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-15mb/google/zork: Change SPI fast speed to 66mhzRob Barnes
Morphius cannot support 100Mhz fast SPI causing it to not boot. Downgrade all zork boards to fast=66mhz and normal=33mhz to be safe. BUG=b:161233767 TEST=Boot morphius Change-Id: I7744dd0cb8dede985fbdc28a64385e0bc4048402 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43459 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Eric Peers <epeers@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-15mb/google/oak: Add new DRAM modules for oakwuxy
Add DRAM support for oak: Samsung K4E6E304ED-4GB # 1001 Nanya NT6CL512T32AM-H0-4GB # 1010 BUG=b:157702981 BRANCH=oak TEST=emerge-hana chromeos-ec coreboot chromeos-bootimage depthcharge, update FW to DUTs,these DUTs can pass 'memtester' test over 48 hours. Signed-off-by: Xingyu Wu <wuxy@bitland.corp-partner.google.com> Change-Id: I95eb51debac905145f16b83c9b74a2bd31dbef45 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42184 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-07-14mb/hatch: Fix Puff baseboard missing mainboard symbolsEdward O'Callaghan
Fix a missing CONFIG_ prefix in Makefile. BUG=b:161154280 BRANCH=puff TEST=builds Change-Id: I177fcd830a8a03a8db1910bfbfd784a60dc08e11 Spotted-by: Ryan Lin. Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43438 Reviewed-by: Sam McNally <sammc@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-14src: Remove unused 'include <stdint.h>Elyes HAOUAS
Found using: diff <(git grep -l '#include <stdint.h>' -- src/) <(git grep -l 'int8_t\|int16_t\|int32_t\|int64_t\|intptr_t\|intmax_t\|s8\|u8\|s16\|u16\|s32\|u32\|s64\|u64\|INT8_MIN\|INT8_MAX\|INT16_MIN\|INT16_MAX\|INT32_MIN\|INT32_MAX\|INT64_MIN\|INT64_MAX\|INTMAX_MIN\|INTMAX_MAX' -- src/) |grep -v vendorcode |grep '<' Change-Id: I5e14bf4887c7d2644a64f4d58c6d8763eb74d2ed Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41827 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-14src: Remove unused 'include <types.h>'Elyes HAOUAS
Files found using: diff <(git grep -l '#include <types.h>' -- src/) <(git grep -l 'BIT(\|size_t\|wchar_t\|wint_t\|NULL\|DEVTREE_EARLY\|DEVTREE_CONST\|MAYBE_STATIC_NONZERO\|zeroptr\|int8_t\|int16_t\|int32_t\|int64_t\|intptr_t\|intmax_t\|s8\|u8\|s16\|u16\|s32\|u32\|s64\|u64\|INT8_MIN\|INT8_MAX\|INT16_MIN\|INT16_MAX\|INT32_MIN\|INT32_MAX\|INT64_MIN\|INT64_MAX\|INTMAX_MIN\|INTMAX_MAX\|bool\|true\|false\|cb_err\|CB_SUCCESS\|CB_ERR\|CB_ERR_ARG\|CB_CMOS_\|CB_KBD_\|CB_I2C_\|cb_err_t\|DIV_ROUND_CLOSEST\|container_of\|__unused\|alloca(\|ARRAY_SIZE\|ALIGN\|ALIGN_UP\|ALIGN_DOWN\|IS_ALIGNED\|__CMP_UNSAFE\|MIN_UNSAFE\|MAX_UNSAFE\|__CMP_SAFE\|__CMP\|MIN(\|MAX(\|ABS(\|IS_POWER_OF_2\|POWER_OF_2\|DIV_ROUND_UP\|SWAP(\|KiB\|MiB\|GiB\|KHz\|MHz\|GHz\|offsetof(\|check_member\|member_size' -- src/)|grep -v vendor |grep '<' Change-Id: I5d99d844cc58d80acb505d98da9d3ec76319b2eb Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41677 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-14mb/google/zork: Add USB to baseboard devicetreeRob Barnes
Add USB ports, USB user-facing camera and USB bluetooth to devicetree. USB ports 4 and 5 are duplicated for picasso and dali. BUG=b:158096224 TEST=Boot Trembyle and Dalboz, Dump acpi tables Change-Id: Icf8628d91e27a3afdc5fd67a53b44089c809da87 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42799 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-14mb/google/zork: Split devicetree between baseboardsRob Barnes
Split zork baseboard devicetree between dalboz and trembyle. The devicetree is simply duplicated, no other changes in this commit. BUG=b:158096224 TEST=Build coreboot for zork Signed-off-by: Rob Barnes <robbarnes@google.com> Change-Id: I5b26770790092c69db9567fa4337edd21a6ed809 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42741 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-14mb/google/hatch: Set SA slow slew rate to 1/2 for jinlon/dratiniWisley Chen
Screen flickered on VT2 on some devices after idle a period of time. Remove SSR (1/8) setting for SA to default SSR (1/2), screen flicking issue disappeared, and didn't affect acoustic noise much. Because CB:38212 (commit eae254e) caused this issue. BUG=b:160754994 TEST=build dratini, observe that screen flick issue disapppered Change-Id: I9e81c2f15dd6babfa360eee213fc4ab6310c7455 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43284 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-14mainboard/volteer: Enable SaGv for volteer2, delbin & voxelShreesh Chhabbi
SaGv needs to be enabled for only QS. On ES2, we are seeing system instability. BUG=b:159198381 TEST=Tested for boot. Power and performance tests were run with volteer2 with qs setup. System showed stability. Tested for boot stability on on delbin. Change-Id: I1bce3b9f837fb19ba5a20ae31750a73474a86788 Signed-off-by: Shreesh Chhabbi <shreesh.chhabbi@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42483 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2020-07-14mb/google/kukui: Add new configs 'Cerise' and 'Stern'xuxinxiong
New boards introduced to Kukui family. BUG=b:160854400 TEST=make # select Cerise and Stern BRANCH=kukui Change-Id: I5841d57c0891d5191dd96097b90da889855b56c8 Signed-off-by: xuxinxiong <xuxinxiong@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43320 Reviewed-by: Zhaoyou Hong <hongzhaoyou@huaqin.corp-partner.google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Chen-Tsung Hsieh <chentsung@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-14mb/google/volteer: config QS silicon devices for CSE LITENick Vaccaro
Configure volteer2 and delbin, the two variants currently using preQS or QS silicon, to use CSE Lite. BUG=b:158140797 TEST=cd to volteer's asset_generation folder, execute "./gen_all_variant_images.sh" and verify that all variant images are produced. Change-Id: I5e444529b090d82094b9da0df2648ea4cdb2888e Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43413 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2020-07-13mb/google/zork: Fix check for variant_uses_v3_schematics()Furquan Shaikh
CB:43224 ("mb/google/zork: Add helpers for v3 schematics and wifi power enable") added helper functions for determining if a board uses v3 schematics. However, it introduced a regression by adding a wrong check for variant_uses_v3_schematics() in variant_audio_update(). This change fixes the check to ensure that dmic_gpio is updated when variant is not using v3 schematics. BUG=b:161141258,b:161128964 TEST=Verified on trembyle that trackpad works again (it was broken because of the regression). Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I0e6ad844f68cface7b545f1547bd94470c30dde4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43415 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-13mb/google/zork: Create Woomax variantKane Chen
Create the woomax variant of the zork reference board by copying the template(coreboot-zork/util/mainboard/google/trembyle) files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.1.1). BUG=b:158343602 BRANCH=None TEST=emerge-zork coreboot Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: I0bb8ce1851f4064d24e48fd8957e2f9fe1e80b53 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42680 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-12mb/google/beltino/bootblock.c: Drop unused includeAngel Pons
Change-Id: I2994b8bf5521b539a9f3585a3221452b1807837a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43366 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-07-12mb/google/zork: Update SPI mode to 100MHz, 1-2-2Martin Roth
Change SPI speed from 66MHz, mode 1-1-2 to 100MHz mode 1-2-2. “1-2-2" means command, address and data are transmitted through 1 wire, 2 wire and 2 wire, respectively. BUG=b:160603142 TEST=Boot on trembyle, verify register settings. Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I14f96e3c085126c70e64ef3a3f5b7b54ce6cbffe Reviewed-on: https://review.coreboot.org/c/coreboot/+/43306 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Rob Barnes <robbarnes@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-12soc/intel/baytrail: Add dedicated devices for MMC and MMC 4.5 controllerMate Kukri
- Correctly detect device 17h as the MMC 4.5 controller - Support detection of the "old" MMC controller at device 10h Signed-off-by: Mate Kukri <kukri.mate@gmail.com> Change-Id: I9f0007b1cf01df09f775c088397c3b9c846908c3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43086 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-07-12mb/google/volteer: Convert static ASL files to new DPTF implementationTim Wawrzynczak
This patch converts the current DPTF policies from static ASL files into the new SSDT-based DPTF implementation. All settings are intended to be copied exactly. Change-Id: I964c53afbd503d47a07b982672425f0e7a986a3f Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41895 Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-12mb/google/dedede: Add ability to provide override GPIO tableKarthikeyan Ramasubramanian
For variants with slightly different GPIO configuration, add support to pass an override GPIO configuration table. BUG=None TEST=Build and boot the waddledee mainboard. Change-Id: I2f1c6dc2ea5499bff96a471c4461339ef01ee19a Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43279 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-07-12mb/google/dedede/var/drawcia: support internal usb cameraWisley Chen
BUG=b:160741778 TEST=build drawcia, and check camera can be regconized Change-Id: I67bee9773b53451653abd76088d1d4062fe3da8f Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42929 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-12mb/google/dedede/var/drawcia:Add audio support (ALC5682 codec, MX98360A spk amp)Wisley Chen
Select the drivers for ALC5682 codec and MX98360A spk amp BUG=b:158202026 TEST=FW_NAME=drawcia emerge-dedede coreboot chromeos-bootimage Change-Id: If271f11f10a85ade6f61ff8c25bfafeb67a69af6 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42928 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-07-12haswell: Move some MRC settings to devicetreeAngel Pons
There's no generic way to tell whether a mainboard has an EC or not. Making Kconfig symbols for these options seems overkill, too. So, just put them on the devicetree. Also, drop unnecessary assignments when the board's current value is zero, as the struct defaults to zero already. Change-Id: If2ebac5fcab278c97dfaf8adc9d1e125888acafe Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43129 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-12haswell: Add function to retrieve SPD addressesAngel Pons
And use it instead of directly writing to the MRC struct. Change-Id: I7f04db29a08512c1a8b2b2300dba71cb3b84a5c5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43127 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2020-07-12haswell: Automatically determine system typeAngel Pons
Check the PCH's LPC device ID to know the system type instead of relying on hardcoded numbers. The `get_pch_platform_type` function is MRC-safe. Change-Id: Icfe7c2dccb7c7a178892ad3a2e34ca93b33b2bb9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43124 Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-12haswell: Introduce ENABLE_DDR_2X_REFRESH Kconfig optionAngel Pons
This Kconfig symbol allows doubling the memory's refresh rate, assuming that the MRC actually cares about it. It is disabled by default except on the mainboards which explicitly enabled this setting in `pei_data`. Change-Id: I6318dad0350d1c506c67f9d117d0ae8dad871281 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43122 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2020-07-12haswell boards: Drop unused romstage.c includesAngel Pons
Several of these includes are no longer necessary. Get rid of them. Since "raminit.h" already includes "pei_data.h", we can omit including the latter for brevity's sake. Change-Id: Ia7e9dadf87114ca9ea4761b89909ea035cdfc38a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43121 Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-12haswell: Factor out `max_ddr3_freq`Angel Pons
All mainboards choose the maximum speed of DDR3-1600. Change-Id: I8863f9d1df950b924f596689ebf1bfda5d317e06 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43120 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-12haswell: Compute disabled channel masks at runtimeAngel Pons
All mainboards have a non-zero SPD address to implemented DIMM slots. Knowing this, it is possible to compute the MRC slot population masks automatically instead of hardcoding the values on each mainboard. Change-Id: Ia8f369dd1228d53d64471e48700e870e01e77837 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43119 Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-12mb/google/slippy: Factor out common MRC settingsAngel Pons
There's no need to redefine common settings. Change-Id: I4c6b65bce42b875bb55e8d04da44afe9c18fb6e5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43114 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2020-07-12mb/google/beltino: Factor out common MRC settingsAngel Pons
There's no need to redefine common settings. Change-Id: I62f5014cf1fea093aee17023b48fd4d404279410 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43113 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2020-07-12haswell: Relocate `mainboard_romstage_entry` to northbridgeAngel Pons
This is what sandybridge does, and if done properly allows factoring out common settings. Said refactoring will be handled in subsequent commits. Change-Id: I075eba1324a9e7cbd47e776b097eb940102ef4fe Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43108 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 03:58:50 +0000