| Age | Commit message (Collapse) | Author |
|---|
|
This requires changes the interface that sets up the system
PLL to support a given reference devider value and given
feedback value.
Also, this requires a change in the dividers used for UART,
USB, I2C setup.
Change-Id: I98cf7c655dbb3e95b8fcee3c7f468122021c70b5
Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Reviewed-on: https://review.coreboot.org/12765
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The correspondence between engineering code names and
commercial names can be found on chromium.org website at:
https://www.chromium.org/chromium-os/developer-information-for-chrome-os-devices
This it to make the names more relevant:
towiki (in util/board_status/to-wiki/towiki.sh) will pick such
names, which end up in the supported board list at:
http://www.coreboot.org/Supported_Motherboards
Change-Id: I2d705672d7202964fea3f62a5bd61a231d3f14c0
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Reviewed-on: https://review.coreboot.org/12652
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
This is to make towiki pick that information, to make
these boards end up in the laptop list at:
http://www.coreboot.org/Supported_Motherboards
Change-Id: Ibf8bf4bf6566080a34687e36675d4c4c8b89f334
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Reviewed-on: https://review.coreboot.org/12716
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The symbols CHROMEOS_VBNV_EC, EC_SOFTWARE_SYNC, and VIRTUAL_DEV_SWITCH
should only be selected if CHROMEOS is selected.
Change-Id: I07ef631d63be53cf99a6bf61d0e91b88728dbba3
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12659
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The Chrome OS verified boot path supported multiple CBFS
instances in the boot media as well as stand-alone assets
sitting in each vboot RW slot. Remove the support for the
stand-alone assets and always use CBFS accesses as the
way to retrieve data.
This is implemented by adding a cbfs_locator object which
is queried for locating the current CBFS. Additionally, it
is also signalled prior to when a program is about to be
loaded by coreboot for the subsequent stage/payload. This
provides the same opportunity as previous for vboot to
hook in and perform its logic.
BUG=chromium:445938
BRANCH=None
TEST=Built and ran on glados.
CQ-DEPEND=CL:307121,CL:31691,CL:31690
Change-Id: I6a3a15feb6edd355d6ec252c36b6f7885b383099
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12689
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
We never defined the flash size for this board, so the (too small)
default was used. Instead, adopt the size given in depthcharge's fmap
description.
Change-Id: I63782922ee05a9595d6c0de56750460ebb67aec6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/12674
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
BUG=none
TEST=emerge-oak coreboot
BRANCH=none
Change-Id: Idf74265c9c1ab3a1a74fd18dfd289fccad25177e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 569c433886b19cd08d168e995bf34156c2ba6963
Original-Change-Id: I07fda6a0719d49e2c07249276ae2cc0b57fdfeda
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292660
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/12610
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=none
TEST=emerge-oak coreboot
BRANCH=none
Change-Id: I2b9e1fc16183a29ba308313d347f2f0e948e96a7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ee56cab3b5c04838af80690c21d3aa160d71501a
Original-Change-Id: I2eaa0a406c29b7c9012e3c9860967fc3f27a48a5
Original-Signed-off-by: henryc.chen <henryc.chen@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292669
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/12608
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
BRANCH=none
BUG=none
TEST=Oak build pass
Change-Id: Ic2fd9b2ec0592d1f7195d72c60dab15961de0a9e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4d0b00a779b87b0b625cc2bccd8f7470b79e6410
Original-Change-Id: Id9f17d64e9e30946817b86ec8cdfe67ea3dbc798
Original-Signed-off-by: CC Ma <cc.ma@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292675
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/12607
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=none
BRANCH=none
TEST=emerge-oak corebootk
Change-Id: Ic1a0d640cac7fd98acd06d619736303fa449c0a1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ce465e8cbdf6465c072e476a91a400d78c959218
Original-Change-Id: Iade51db02f45264fdffe387e0563b60e637c0710
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292674
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/12606
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BRANCH=none
BUG=none
TEST=verified on Oak rev2 & rev3
Change-Id: I35776f5bdf54243236afba860ae8e9117a160cde
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b46bd9a079107ab78964f7e39582b3b5c863b559
Original-Change-Id: I6696972d07adbf3da5967f09c1638bb977c10207
Original-Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292673
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/12605
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
update dptf TSR1 & TSR2 critial points from 70 to 75
TSR1 & TSR2 are reach 68 degree that is close to 70 degree afer SVPT
test, change the point will avoid to trigger critial in our factory
run in test
BRANCH=none
BUG=none
TEST=build and boot chell DUT
Change-Id: Ie5b8b24d82e929a7bd254967b70b61fda2c8bd0a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: cf29fee19edf425010cc76af95b7a8e73a3d82bb
Original-Change-Id: Idb9dd77432cfd246c1c612e52c6f945352e265ca
Original-Signed-off-by: Wisley Chen <Wisley.Chen@quantatw.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/313967
Original-Commit-Ready: Duncan Laurie <dlaurie@chromium.org>
Original-Tested-by: Chen Wisley <wisley.chen@quantatw.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Chen Wisley <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/12604
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Disable the kepler device to save power and enable S0ix testing.
It has been disabled in the ME image and was not working anyway..
BUG=chrome-os-partner:40635
BRANCH=none
TEST=build and boot on glados
Change-Id: I6640c7a09d418ba4b4de6f16138c124436dd8758
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6490769a32539cb6ef429717f021519c152a4a54
Original-Change-Id: If6e384dd2218c6a110747a489329a59fa6433c02
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/313827
Original-Commit-Ready: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12599
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
- Disable kepler device, it is removed and was not used on proto anyway.
- Enable GPP_D22 as GPO to control I2S2 buffer for bit-bang PDM.
- Disable HS400, this is breaking some devices on proto boards and
is being disabled to reduce risk for EVT build.
- Change Type-C USB2 port drive strength.
BUG=chrome-os-partner:47346
BRANCH=none
TEST=build and boot on chell proto
Change-Id: Icf31f08302c89b2e66735f7036df914c0a0b9e8c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d00abc12efa69a99e6b0272228f52fb29e6b9180
Original-Change-Id: I63bda0b06c7523df9af9aed9b82280133b01d010
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/313825
Original-Commit-Ready: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12598
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Update Memory ID for Proto board
Update detection of single/dual channel memory to use SPD Index (Memory ID)
Remove boardid.h as it is no longer needed
BUG=None
BRANCH=None
TEST=Build and Boot Lars (Proto)
Change-Id: I100b0fec4bf555c261e30140109cb0f36576130c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 24a4fddf4f1a4441fca8783cfa451e220ff986d8
Original-Change-Id: I636e881cb3fb9a0056edea2bc34a861a59b91c8f
Original-Signed-off-by: David Wu <David_Wu@quantatw.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/313903
Original-Commit-Ready: David Wu <david_wu@quantatw.com>
Original-Tested-by: David Wu <david_wu@quantatw.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/12593
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=chrome-os-partner:36682
TEST=emerge-oak coreboot
BRANCH=none
Change-Id: I748752d5abca813a0469d3a76e4d40fcbeb9b959
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ece2f412d94f071a6f5f1dbed4dfaea504da9e1a
Original-Change-Id: I1dd5567a10d20840313703cfcd328bec591b4941
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292558
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/12587
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The Touchpad and Touchscreen _CRS methods do not return an interrupt
value if the I2c busses that the devices are on are not in PCI mode.
Previously they didn't return any value if they weren't in PCI mode.
This patch has them return an empty resource template.
Fixes these warnings:
dsdt.aml 2813: Method (_CRS)
Warning 3115 - ^ Not all control paths return a value (_CRS)
dsdt.aml 2813: Method (_CRS)
Warning 3107 - ^ Reserved method must return a value
(Buffer required for _CRS)
dsdt.aml 2832: Method (_CRS)
Warning 3115 - ^ Not all control paths return a value (_CRS)
dsdt.aml 2832: Method (_CRS)
Warning 3107 - ^ Reserved method must return a value
(Buffer required for _CRS)
Change-Id: I02a29e56a513ec34a98534fb4a8d51df3b70a522
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12519
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I3963d145f6d209e32256268259e93103c62809c5
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/12504
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
|
|
We've actually got more warnings now than when I first tested IASL
warnings as errors. Because of this, I'm adding it with the option
to have it disabled, in hopes that things won't get any worse as we
work on fixing the IASL warnings that are currently in the codebase.
- Enable IASL warnings as errors
- Disable warnings as errors in mainboards that currently have warnings.
- Print a really obnoxious message on those platforms when they build.
***** WARNING: IASL warnings as errors is disabled! *****
***** Please fix the ASL for this platform. *****
Change-Id: If0da0ac709bd8c0e8e2dbd3a498fe6ecb5500a81
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/10663
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This makes the same changes to the LPDDR3 configuration that
were made for Samsung modules:
- Enable ODT function
- Change DS to 40 from 34.3
BUG=chrome-os-partner:47416
BRANCH=firmware-veyron-6588.B
TEST=Boot on mickey elpida board
Change-Id: If8c729188803dd854dbbe80539fb228636b5eb9f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b3eb8bc31b9727b67a6b53b4370315010d9d6379
Original-Change-Id: I2d54d3087ecd3536469866f30e4eb2d8b1acd5c1
Original-Signed-off-by: jiazi Yang <Tomato_Yang@asus.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/311153
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/311855
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/12484
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
These platforms needed to be adjusted to fix various Kconfig warnings.
Both platforms needed MAINBOARD_HAS_NATIVE_VGA_INIT because they're setting
MAINBOARD_DO_NATIVE_VGA_INIT.
veyron_emile needed a few symbols that depend on CHROMEOS to be moved
into a new config CHROMEOS section. This matches the other CHROMEOS
platforms.
veyron_danger needed to select MAINBOARD_HAS_CHROMEOS before the
CHROMEOS symbol was set.
Change-Id: I8c7f594ba572a02513a68095c16314006fb4e379
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/12462
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
EC_SOFTWARE_SYNC depends on CHROMEOS, so move it into the CHROMEOS section.
This fixes the kconfig warning:
warning: (CHROMEOS && BOARD_SPECIFIC_OPTIONS ...) selects
EC_SOFTWARE_SYNC which has unmet direct dependencies
(MAINBOARD_HAS_CHROMEOS && CHROMEOS && VBOOT_VERIFY_FIRMWARE)
Change-Id: I459f48fd18c7568c4584df7d4aefa69dec3e4907
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/12460
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Emile has a on board ethernet.
BUG=chrome-os-partner:47465
TEST=vpd -s ethernet_mac0=001122334455
build and check the MAC address
Change-Id: I90ed0ed1253c804568fcdd3dd212bb062a48c836
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 99b275c594196de0811f68380e66c226d2649927
Original-Change-Id: I1690a1f39090c57c64d4965092c80eef9070babf
Original-Signed-off-by: ZhengShunQian <zhengsq@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/311900
Original-Commit-Ready: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Tested-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/12452
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
On one particular TV the TV was holding SDA low when it came up. It
would release the SDA when the SCL went low the first time.
Unfortunately the HDMI i2c port wouldn't transmit until the SDA was
released.
Let's detect this case and insert a bogus clock pulse to try to get the
other side to release SDA.
It's unclear why the kernel doesn't have this problem.
BRANCH=none
BUG=chrome-os-partner:46256
TEST=Insignia TV works now
Change-Id: Ic9d27eb69bdc9c5fb11a68258e0c755cdc8b79d7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 356ee7503f04e741a41be37ad573b588067b7114
Original-Change-Id: I4b6361877e0576cc4ea2f643f073f1aab660e434
Original-Signed-off-by: Douglas Anderson <dianders@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/309258
Original-Reviewed-by: Agnes Cheng <agnescheng@google.com>
Original-Commit-Queue: Agnes Cheng <agnescheng@google.com>
Original-Trybot-Ready: Agnes Cheng <agnescheng@google.com>
Original-Tested-by: Agnes Cheng <agnescheng@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/309546
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/12451
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Kernel needs to set Audio IRQ as wake capable.
BUG=None
BRANCH=None
TEST=emerge-lars coreboot
Change-Id: Ib7f0fc52baa006d992a2f91a63417e3f76817634
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 32d82ac48c6f830fbb09b776d0adaf6b7a727416
Original-Change-Id: I3fd70ac99c623a99b07fa1a185ebace8c1fc3d69
Original-Signed-off-by: David Wu <David_Wu@quantatw.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/312172
Original-Commit-Ready: David Wu <david_wu@quantatw.com>
Original-Tested-by: David Wu <david_wu@quantatw.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12450
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This patch enables GPP_B5 as ACPI_SCI for wake.
It also defines touchpad wake device in ACPI with GPE0_DW0_05 for _PRW.
BUG=none
BRANCH=none
TEST=emerge-lars coreboot
Change-Id: I2b65f6a37783ecdbdbc32ebe613243e042c865e9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ec5b629f920984564f12f2c09458ed300d031f69
Original-Change-Id: I9bd2b3595ae833fa5d07d97a7cda4a29041be837
Original-Signed-off-by: David Wu <David_Wu@quantatw.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/311890
Original-Commit-Ready: David Wu <david_wu@quantatw.com>
Original-Tested-by: David Wu <david_wu@quantatw.com>
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/12449
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Use the keyboard backlight to provide indication that the system is
booting. This is useful for determining that a system is in S0 and
is running BIOS code.
BUG=chrome-os-partner:47435
BRANCH=none
TEST=boot on chell and see keyboard backlight come on early
Change-Id: I43e699bcc2f34998d3d6ce33ce72c7b04b55c146
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a3a0147b6de681365a9c995175076d5f397016fb
Original-Change-Id: I2441c28431e71b13b70e6533e175d29ccfd8d7e9
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/312358
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12448
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The GPIO for USBA_1_ILIM_SEL_L should be low to enable 2A charging
from the Type-A port.
BUG=chrome-os-partner:47172
BRANCH=none
TEST=emerge-glados coreboot
Change-Id: I1bbcdd467684e7c1372c8ca862d498fb6cbb966c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c8a8fbed6d0fd7aea0a41db2bde104fe7a05cabe
Original-Change-Id: I3b18cbb204cfa19e50f34ea9533018e286342513
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/312451
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12447
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
For the rails controllable by the host processor through
gpios turn them off in the sleep paths. The result is that
S3 and S5 will turn off those rails.
BUG=chrome-os-partner:47228
BRANCH=None
TEST=Built for chell.
Change-Id: I5843f13be43a6ec143600585a5a0c47563e533dd
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ddd5860dc0cfee68ec2f77f4931665740bede08c
Original-Change-Id: Ife0e2fb11373dd129e20b914b45cd5b56c3493f7
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/312321
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/12446
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
For the rails controllable by the host processor through
gpios turn them off in the sleep paths. The result is that
S3 and S5 will turn off those rails.
BUG=chrome-os-partner:47228
BRANCH=None
TEST=Built and booted glados. Suspended and resumed.
Change-Id: I6d45683b64ca5f7c3c47e11f95951bd2d9abf31e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ed432e2b5535da6f872a53b76886d983f00b4e8e
Original-Change-Id: I94d7e0b00bf7e7da8dc59f299e41b72e8fcb64f4
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/312320
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/12445
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
o. Make some gpio changes base on Emile spec.
o. Init sdmmc function.
o. Revert cpu freq reducing in recovery mode since Emile
have more effective thermal than Mickey.
o. Revert the changes of lpddr3-samsung-2GB config.
BUG=chrome-os-partner:46658
TEST=build and boot on Emile
BRANCH=veyron
Change-Id: Ibdc2ce511c8e215c202e2067d79f4c60cdfca738
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 39e5436c8aa3353af77f62e548f48d19dc722999
Original-Change-Id: Ib2c78c9b5e3ac6620ab1772879a7ea0f7007f96e
Original-Signed-off-by: ZhengShunQian <zhengsq@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/307651
Original-Commit-Ready: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Tested-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/12396
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This is a copy of mickey and renamed.
CQ-DEPEND=CL:306967
BUG=chrome-os-partner:46658
TEST=build coreboot
BRANCH=veyron
Change-Id: I9e1232f3f1334ec747a5beb52f214635a7ab08ae
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9316a9ec27d5799e290add1e5818f4449b680fde
Original-Change-Id: I906de7bbc8b8e110e0774c14ec636a327230b325
Original-Signed-off-by: ZhengShunQian <zhengsq@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/307620
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/12394
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
When enabling CONFIG_SEPARATE_VERSTAGE the functions in chromeos.c need
to be put into verstage.
BUG=chrome-os-partner:46289
BRANCH=none
TEST=enable SEPARATE_VERSTAGE and build for chell
Change-Id: Ic58a6e383806a7a64b9af760e194fddf15c645f1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 403f0707074802371237beecf1941034c1612f10
Original-Change-Id: Ib1154869974337b53a64efa5892a83ecd81973b8
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/310928
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12393
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
In order to wake from trackpad and wifi we cannot enable Deep S3.
BUG=chrome-os-partner:46289
BRANCH=none
TEST=wake from trackpad on chell
Change-Id: Ieb2210d5d15b5f5d744a686c743df11e5d72558f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: cbc74e13b754249869144df84ab2bb9b7e77119a
Original-Change-Id: I84265197fb964e0594a4672a40fd3e2362e29ae1
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/311306
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12392
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This adds the SPD for SK-Hynix H9CCNNNCLTMLAR memory to be
used in the EVT build.
BUG=chrome-os-partner:47346
BRANCH=none
TEST=emerge-chell coreboot
Change-Id: I45d0840e43ed81d8286b005f0a99b014b7f0cf28
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1e917440141c586cb370147f9c5b782d6e77ea10
Original-Change-Id: I02f1349f38d83f4a09887adf81384b5a8f475dd0
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/311214
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12391
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The family variable was not being set yet for skylake, add this
to the current boards.
BUG=chromium:551715
BRANCH=none
TEST=emerge-glados coreboot
Change-Id: Icf175e4ce89cb47b9eabce1399eb3ef29e7a607f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7e379402f38634eb0204e03b616111fff9515cec
Original-Change-Id: Ia31fb04b5c22defc71a0c02d9fa1eff93ccbc49d
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/311213
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12390
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The net names are offset by 1. My board is not stable enough
to really test all of these yet...
BUG=chrome-os-partner:46289
BRANCH=none
TEST=emerge-chell coreboot
Change-Id: I65e17323f2819eca130c1bf0ccbc3ea0ec2f383f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 327194dcfcb3a5c9f431b1a2e26c230cb2b2a48b
Original-Change-Id: I50e9ea091bb6e6a1da3a9434ae0fbf3f652fa354
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/311113
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12389
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Copy from the CL https://chromium-review.googlesource.com/#/c/307028/
(I40c540dad32beefe249f025b570c347d3ad08c36)
BRANCH=None
BUG=None
TEST=emerge-lars coreboot
Change-Id: I131fb729661f0f3bfd198cdf238c627bf38a46a5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 70d471c507d12924466979c93742944975a03f27
Original-Change-Id: I0128dc65110ba363185db9c2aca5cdb140c344c2
Original-Signed-off-by: David Wu <David_Wu@quantatw.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/310394
Original-Commit-Ready: David Wu <david_wu@quantatw.com>
Original-Tested-by: David Wu <david_wu@quantatw.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/12344
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
Since, SMP support is removed for ARM64, there is no need for CPU
initialization to be performed via device-tree.
Change-Id: I0534e6a93c7dc8659859eac926d17432d10243aa
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/11913
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
As ARM Trusted Firmware is the only first class citizen for
booting arm64 multi-processor in coreboot remove SMP
support. If SoCs want to bring up MP then ATF needs to be
ported and integrated.
Change-Id: Ife24d53eed9b7a5a5d8c69a64d7a20a55a4163db
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/11909
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
As ARM Trusted Firmware is the only first class citizen for
booting arm64 multi-processor in coreboot remove spintable
support. If SoCs want to bring up MP then ATF needs to be
ported and integrated.
Change-Id: I1f38b8d8b0952eee50cc64440bfd010b1dd0bff4
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11908
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
- CACHE_ROM is no longer used in the coreboot code. It was removed in
commit 4337020b (Remove CACHE_ROM.)
- CAR_MIGRATION is also no longer used in coreboot code - it was removed
in commit cbf5bdfe (CBMEM: Always select CAR_MIGRATION)
- MARK_GRAPHICS_MEM_WRCOMB was removed in
commit 30fe6120 (MTRR: Mark all prefetchable resources as WRCOMB)
Change-Id: I8b33a08c256f6b022e57e9af60d0629d9a3ffac8
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/12327
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The PCH pin names in the schematic were incorrectly labeled.
BUG=chrome-os-partner:46289
BRANCH=none
TEST=build and boot on chell
Change-Id: I6153137b7c04d22db5b3f00f5eaf3f400f4c344c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6f362900b0635dc392c63b25a88a7723f22b467a
Original-Change-Id: If6f8744f020a35a76647366b247723b03c02991a
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/310061
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12324
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch enables the Fan thermal participant device
in the device tree for thermal active cooling action
for DPTF on SKL-U fan based kunimitsu board.
This patch defines the _ART table in dptf ASL file.
With active cooling policy (_ART), we can control the
fan on/off and speed.
BRANCH=None
BUG=chrome-os-partner:46493
TEST=Built for kunimitsu board. Tested to see that the
thermal devices and the participants are enumerated and
can be seen in the /sys/bus/platform/devices. Also,
checked the FAN type the cooling devices enumerated
in the /sys/class/thermal with sysfs interface.
Change-Id: I40c540dad32beefe249f025b570c347d3ad08c36
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 82ae11643ca23e65780006f3890f1d173363b8af
Original-Change-Id: If44b358052a677d13c74919f09a3eb89611fccad
Original-Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/307028
Original-Commit-Ready: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Original-Tested-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Original-Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/12323
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The last_boot NVRAM option was deprecated and removed in
commit 3bfd7cc6. Remove the last_boot option from all
affected mainboards to eliminate user confusion.
Change-Id: I7e201b9cf21dfe5dda156785bad078524098626d
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12316
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
|
|
It encourages users from writing to the FSF without giving an address.
Linux also prefers to drop that and their checkpatch.pl (that we
imported) looks out for that.
This is the result of util/scripts/no-fsf-addresses.sh with no further
editing.
Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11888
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change the tuning setting for the type-c port that is over
the flex cable to use the max possible drive strength.
Also fix up the comments to indicate what Type-c port goes
where instead of just referring to them by number.
BUG=chrome-os-partner:45367
BRANCH=none
TEST=build and boot on glados
Change-Id: Iebcffc9ab95d56289258017248c273090c88bb06
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 824ca87c4bf556d493dc8cdec561f37ab135cd2d
Original-Change-Id: I081623bbb1b0f39f1569b9f5cf7933abefe202b3
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/309010
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12204
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
If we boot without a heatsink then DPTF may power off the system when
it starts if the CPU temp is >90C. Since TJmax is 100C set the
critical threshold to just below that value.
Also remove the active thresholds as chell does not have a fan.
This will have DPTF use the default values but without the DPTF active
policy it shouldn't get used.
BUG=chrome-os-partner:46694
BRANCH=none
TEST=build and boot on chell w/o a heatsink
Change-Id: Id9e8f2c547468db8ad0edaf6c362a9a9bb5b95a2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 23d9117d5d7a4b44fc2298352eba133747f8e246
Original-Change-Id: Ib8e074098e3956efeed0f9b7f8b16652658db374
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/308728
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12202
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This is based on kunimitsu with minor changes:
- update GPIOs based on schematic
- update SPD data for memory config
- disable ALS
BUG=None
TEST=emerge-lars coreboot
Change-Id: Id1c9edfe3cc665e90683344f1662de2e65caf766
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3201aa573a77fcad3b6b1335d23eb4c2a09c1708
Original-Change-Id: Ifae446e4668569b6100b29bc1f52b0fea1df2952
Original-Signed-off-by: David Wu <David_Wu@quantatw.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/308283
Original-Commit-Ready: David Wu <david_wu@quantatw.com>
Original-Tested-by: David Wu <david_wu@quantatw.com>
Original-Reviewed-by: Bernie Thompson <bhthompson@chromium.org>
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/12201
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I95129e6f519735e236c9c13b16e21df25b9ea607
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/12200
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Instead of having many different arrays for USB configuration,
with each array containing one bit of information, have one
array containing all the information for each port.
This way we can put the basic tuning parameters into a
structure and then define structures for the basic supported
configurations.
The existing port definitions are taken from the Skylake HSIO
tuning guide.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=build and boot on glados, verify USB functionality in
all ports.
Change-Id: I5873dee011ae9e250b6654c73a7bd5c17681095b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 864040412b2d2923d3acbfca8055724887c58506
Original-Change-Id: Id518b1086abbe4a8c25d77fd4efc2d0de856bd5f
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/306734
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12163
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
For SMT controllers to power gate, all SMT/SMS clock, data and alert signals should be inactive.
The SML0 blocks are not used for any functional purposes and are not configured in the GPIO tables.
SMT hardware will not allow the blocks to be power gated in this scenario. The SML* pins are
now configured as GPIOs - input and deep.
With this change, the SMT blocks are properly power gating.
BRANCH=none
BUG=chrome-os-partner:45618
TEST=build for Glados.
Change-Id: Ie5406f2a1e0c485ac1290e2154755085fa3bb7b9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5b3fe3c2ddea4c5daedb04078b24cff14efa49d5
Original-Change-Id: I8dcc0bfc121e612a174e6fe3152650d0fcd68f39
Original-Signed-off-by: Archana Patni <archana.patni@intel.com>
Original-Signed-off-by: Subramony Sesha <subramony.sesha@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/306481
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12160
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Spreadsheet as built indicates:
Samsung 4*8Gb - K4E8E304EE-EGCF - 0b0000
Samsung 4*16Gb - K4E6E304EE-EGCF - 0b0001
Hynix 4*8Gb H9CCNNN8GTMLAR-NUD - 0b0010
Hynix 4*16Gb H9CCNNNBJTMLAR-NUD - 0b0011
Adjust the Hynix spds to match accordingly.
BUG=chrome-os-partner:46573
TEST=None
BRANCH=None
Change-Id: I2ae0335af3557c787cced899bfb80db045f99cd0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 35ed2b0a5af53203480c726b875875d7c2cfd855
Original-Change-Id: I3cb38b28c454fbd60b776954c377b4559c6efebd
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.orG>
Original-Reviewed-on: https://chromium-review.googlesource.com/306580
Original-Commit-Ready: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/12159
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This is based on glados with minor changes:
- updated GPIOs based on schematic
- add _PRW for trackpad wake now that it is on a new GPIO
- add SPD for new memory config
- disable ALS
BUG=chrome-os-partner:46289
BRANCH=none
TEST=emerge-chell coreboot
Change-Id: Id5746bf2b5b26000fcc3f029b901bfe29b788dac
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9c5ebe98cf599ba80aac5e9ef238b7996789a819
Original-Change-Id: I75efda64a50b0e6e4a5c9008ce05d76c1e605b0c
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/304927
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12151
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Only change is renaming all occurrences of glados to chell, keeping
capitalization.
Change-Id: I8b1a3efd03d415f27c8872827f8687babbc539f7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/12150
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
- Add placeholder USB phy settings, needs tuning still
- Change UART2 to be skipped during FSP init
- Update headphone codec irq to be level triggered as
that is how the kernel is configuring it
BUG=chrome-os-partner:40635
BRANCH=none
TEST=emerge-glados coreboot
Change-Id: I9a15a27dab49d4e19f8ef0574ee2e61ae90c99fc
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6e7a0032ba23d6762342639c2c7cb877c1f90452
Original-Change-Id: Ie1439f21116022b0644d06853df9490e4651a9ae
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/304926
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12149
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Enable the config option for TPM to use PIRQ instead of SERIRQ
and enable the MAINBOARD_HAS_LPC_TPM option.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=emerge-glados coreboot
Change-Id: I990901117a2c478045c403f1039d6eedfc278255
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 44ecaaae1eb482ef5d4cf1e051de4571cc4441be
Original-Change-Id: I115d468c72c3fd015abdddffdd1626368bfedb6e
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/304925
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12148
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The 1392MHz value used to throttle the RK3288 earlier was somewhat
arbitrary. This patch brings the throttling in sync with the operating
points specified in the Linux device tree for RK3288.
BUG=chrome-os-partner:42054
BRANCH=none
TEST=Saw print statement in image.serial.bin indicating that APLL
was set to the desired frequency.
Change-Id: Ibe570267bbfe23f010ad5e1ea651356291b9c63c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a146f23b13cb0f6da93ada65648cf33ecfaaa7d6
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I6bcdb5fd6ffa3f9a22e79c519bdb7980492e2318
Original-Reviewed-on: https://chromium-review.googlesource.com/302633
Reviewed-on: http://review.coreboot.org/12137
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
This applies CL:300617 to Rialto to down throttle further in
recovery mode.
BUG=chrome-os-partner:42054
BRANCH=none
TEST=Saw print statment in recovery mode with image.serial.bin,
device only got mildly warm after several minutes (not hot).
Change-Id: I08b6024d31c83c6bbd8c8d9d9a07adc9835e81fd
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 74eb9143fbe13df5f386185eab9e5ba9df27cadf
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I9e57d826750cb523c115332fa13a6143bcff7449
Original-Reviewed-on: https://chromium-review.googlesource.com/302631
Reviewed-on: http://review.coreboot.org/12135
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Auron only has three GPIOs for RAMID, so there is no need for
sixteen SPD file entries. Only include 8 SPD entries.
Change-Id: Icf83719a2a5b9271b29f48cde5c66c4c8ccd07f4
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/12073
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Those are actually board specific. Keep the old value as defaults,
though. The defaults are included by all affected boards.
Change-Id: Ib865c7b4274f2ea3181a89fc52701b740f9bab7d
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/11705
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
Merge artifact -- don't check spd_index twice.
BUG=None
TEST=Build only
BRANCH=Auron
Original-Change-Id: I0cc372fec415646854aa931949ed0f57b473cb01
Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/234421
Original-Reviewed-by: Bernie Thompson <bhthompson@chromium.org>
(cherry picked from commit 850125141b52886c845161434a1320676e59534d)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I0070e3f26ebddba716905ebb934bcec4715c4b05
Reviewed-on: http://review.coreboot.org/11912
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
|
|
Part of the following patch was lost in the merge from chromium.
This patch fixes up the spd_index for the copy from the SPD file.
In spd.c "spd_index *= SPD_LEN" will change the original spd_index
from gpio and let the following if(spd_index>3) to misjudge and
disable channel 1 incorrectly. So we calculate the index for spd file
memcpy when calling memcpy().
BUG=chrome-os-partner:32879
TEST=Can get total memory 4G on yuna 4G SKU
BRANCH=Auron
Original-Change-Id: Iebc49e20e4ca15ef6db8c4defe43cc22382a28bf
Original-Signed-off-by: Tim Chen <Tim-Chen@quantatw.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/234420
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Original-Commit-Queue: Shawn N <shawnn@chromium.org>
Original-Tested-by: Shawn N <shawnn@chromium.org>
(cherry picked from commit 3b1fce58b7b4b15e947b40fd011174d4e8e294bc)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I03f9d63623e083c99d349d938fd802d828858f70
Reviewed-on: http://review.coreboot.org/11911
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Georg Wicherski <gw@oxff.net>
Tested-by: build bot (Jenkins)
|
|
This partially reverts commit 33b535f1. After this commit, samsung/lumpy had its
internal USB EHCI controller broken, with no assigned IRQ.
PIRQA-PIRQH may be wired as edge-triggered interrupts, making them exclusive
for the GPIO to use. They cannot be used for PCI devices at the same time.
Change-Id: Ic90343401ac20ca8673baf927cd7703c3481aeab
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/9993
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
In order to build stand alone verstage the chromeos.c
file needs to be part of the verstage target.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados.
Change-Id: Id2b05548e4e10cd12002286913f2228b84802e63
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11828
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
In order to introduce a verstage which performs vboot
verification the cache-as-ram environment needs to be
generalized and split into pieces that can be utilized
in romstage and/or verstage. Therefore, the romstage
pieces were removed from the cache-as-ram specific pieces
that are generic:
- Add fsp/car.h to house the declarations for functions in
the cache-as-ram environment
- Only have cache_as_ram_params which are isolated form the
cache-as-ram environment aside from FSP_INFO_HEADER.
- Hardware requirements for console initialization is done
in the cache-as-ram specific files.
- Provide after_raminit.S which can be included from a
romstage separated from cache-as-ram as well as one that
is tightly coupled to the cache-as-ram environment.
- Update the fallout from the API changes in
soc/intel/{braswell,common,skylake}.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados.
Original-Change-Id: I2fb93dfebd7d9213365a8b0e811854fde80c973a
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/302481
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: Id93089b7c699dd6d83fed8831a7e275410f05afe
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11816
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Eliminate unused parameters from the console initialization.
BRANCH=none
BUG=chrome-os-partner:44827
TEST=Build and run on kunimitsu
Original-Change-Id: Iacacea292d43615e9d2f8e5d3ec67e77f3f08906
Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/301204
Original-Commit-Ready: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Change-Id: I3a0ea948ce106b07cb6aa872375ce588317dc437
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11814
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
board_id() returns an integer which is platform-specific. 0 for one port
is different from 0 for another port. So there is no default board_id()
and hence enabling it on boards other than urara would cause build failure.
Not enabling it on urara or just setting id to "(none)" as is default results
in board_id() = 0 which means urara and an error message on console.
Change-Id: I94618f36a75e7505984bbec345a31fe0fa9cc867
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10379
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
|
|
This is a sad story. We have three different code paths for
sandybridge and ivybridge: proper native path, google MRC path, and,
everyone's favorite: Intel FSP path. For the purpose of this patch,
the FSP path lives in its own little world, and doesn't concern us.
Since MRC was first, when native files and variables were added, they
were suffixed with "_native" to separate them from the existing code.
This can cause confusion, as the suffix might make the native files
seem parasitical.
This has been bothering me for many months. MRC should be the
parasitical path, especially since we fully support native init, and
it works more reliably, on a wider range of hardware. There have been
a few board ports that never made it to coreboot.org because MRC would
hang.
gigabyte/ga-b75m-d3h is a prime example: it did not work with MRC, so
the effort was abandoned at first. Once the native path became
available, the effort was restarted and the board is now supported.
In honor of the hackers and pioneers who made the native code
possible, rename things so that their effort is the first class
citizen.
Change-Id: Ic86cee5e00bf7f598716d3d15d1ea81ca673932f
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11788
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
|
|
The vboot verification in a stage proper is unified
replacing duplicate code in the tegra SoC code. The
original verstage.c file is renamed to reflect its
real purpose. The support for a single verstage flow
is added to the vboot2 directory proper.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built glados.
Change-Id: I14593e1fc69a1654fa27b512eb4b612395b94ce5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11744
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
BUG=chrome-os-partner:41280
BRANCH=none
TEST=Audio jack insert/eject detection and headset buttons work
on glados with the nau8825 driver in chromeos-3.18 and the
staging kernel skl2.
Change-Id: I813a985b4a39249a2cdbe45117acbdb7710bfa29
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7a5b3dafd407fea2376dff5c3dcde50dff4704fb
Original-Change-Id: Ic24a0c444761d0f3a35c268078e70d9aacca4c80
Original-Signed-off-by: Ben Zhang <benzh@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/293610
Original-Reviewed-by: Anatol Pomazau <anatol@google.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11720
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Fix the typo of _DDR to be _DDN.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=build glados with iasl-20150717
Change-Id: I8d61a6653c3109890d04e54f0d694703b9c9f2bf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d4a2b2583bdbf9afd7b306359338d4c49bbb44ad
Original-Change-Id: I7b7905a217d34a8a78b8280c898f1074ecbe3cf6
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/302164
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11717
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
While the romstage code flow is not consistent across all
mainboards/chipsets there is only one way of running ramstage
from romstage -- run_ramstage(). Move the
timestamp_add_now(TS_END_ROMSTAGE) to be within run_ramstage().
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados. TS_END_ROMSTAGE still present in
timestamp table.
Change-Id: I4b584e274ce2107e83ca6425491fdc71a138e82c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11700
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
When building for ChromeOS, it is expected that Coreboot will only occupy the
first MiB of the SPI flash, according to the veyron fmap description.
Otherwise, it makes sense to use the full ROM size.
Change-Id: I168386a5011222866654a496d8d054faff7a9406
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: http://review.coreboot.org/11117
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Instead of reaching into src/include and re-writing code
allow for cleaner code sharing within coreboot and its
utilities. The additional thing needed at this point is
for the utilities to provide a printk() declaration within
a <console/console.h> file. That way code which uses printk()
can than be mapped properly to verbosity of utility parameters.
Change-Id: I9e46a279569733336bc0a018aed96bc924c07cdd
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11592
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
This is a follow-up patch to
https://chromium-review.googlesource.com/#/c/286877, after fsp support
is landed in v1.5.
BUG=chrome-os-partner:42975
BRANCH=none
TEST=execute "mosys memory spd print all" on glados and kunimitsu
Change-Id: I949e287372b190affac36a0efde8a30402eecdc8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 71a2e1838ff8bbaa358c167dad905b63d23c43fa
Original-Change-Id: I64103af4f8456a053a955845a067062122f47af3
Original-Signed-off-by: Robbie Zhang <robbie.zhang@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/298967
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11657
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
- Assign GPE DW0 to GPP_B block
- Enable GPP_B16 as ACPI_SCI for wake
- Define PCIe WLAN device in ACPI with GPE0_DW0_16 for _PRW
Note that current designs cannot wake from Deep S3 via wifi.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=tested on glados:
1-disable deep s3 in devicetree.cb
2-enable magic packet with "iw phy phy0 wowlan enable magic-packet"
3-powerd_dbus_suspend to go to S3
4-wake system with magic packet
Change-Id: I989768615e9da8ecf6354852d2db7aae8069aa82
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 894354c5bfd499b911b7f89310c48b503dbaadc2
Original-Change-Id: I9a7a317fc2eccc70fdb4862843de1a654fbc2eee
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/298231
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11650
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The EC doesn't support these commands so sending them is
not working. We have had a default policy of wake on USB
for a long time now and this runtime config isn't really
needed any longer.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=emerge-glados coreboot
Change-Id: Ib789ae3a7ba56a11dfb5918cb40bfa2f044d1dc3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0ed7391942afed94bfc7ad04880d4c2b865e5655
Original-Change-Id: I6fe10952f32673a447001b832ac6c6b04b22aef0
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/298233
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11652
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Glados has an ambient light sensor connected to the EC which
is presented to the OS as a standard ACPI0008 device.
BUG=chrome-os-partner:43493
BRANCH=none
TEST=test ALS functionality on glados P2 board
Change-Id: I4a4913a1b407720d85f6e630b674e550bf5e36df
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: aee2b2446ca45039f1b4866feb83754861dba054
Original-Change-Id: I61f3f31ba077f63b36aa0cd9707e128e65c9ea7d
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/298251
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11644
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Remove the acpi_tables.c functions so these functions can move to
SOC init code. The file itself is included by x86/arch code and
must exist for the build to succeed.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=emerge-glados coreboot
Change-Id: I18e6a0be5eac053598b613b30b622c4963417919
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: af04eb112adf58578c8d2c9d3d182d4c2024abb2
Original-Change-Id: Ibe026d493c25d771357ea39e4b956629fbb799ac
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/297758
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11579
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add support for reading board id and populating it in the
coreboot tables so it is exposed to payloads.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=boot on glados and look for reported board ID
Change-Id: Iba93a913b67e3b3230aded289c2e25585dec1195
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 472cb7bc84136a1a8b284d661868e64eca4ec004
Original-Change-Id: I478dc0b2f96310b7adbd84701e70598a57306628
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/297746
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11570
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
- Add ACPI code for DPTF support with placeholder thresholds
- Do not have custom PDL for mainboard
- Do not have enable charger control for DPTF as there is
already a complicated charge profile in the EC. We may still
want to enable this but it would need to be tuned to work
well with the EC profile.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=emerge-glados coreboot
Change-Id: I8cd2e0ea9c322ea92c101995e8e706f063428a45
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 55d3614441d6701a6d6f0f9d1ade94364ef2594a
Original-Change-Id: Ie4587572742d3bcdba7c008fc195213ac50c9d9e
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/297745
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11569
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
- romstage.c is using gpio_configure_pads so it should really
include soc/gpio.h instead of relying on it to come from "gpio.h"
- consistent formatting of array initializers in pei_data.c
- remove pei_data->ec_present flag as this is unused in skylake
- fix printk level in spd/spd.c to be BIOS_INFO instead of BIOS_ERR
- clean up acpi_slp_type usage in ec.c, remove unnecessary post
codes, and cleaner console output message.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=emerge-glados coreboot
Change-Id: I0f76a560dc2c4197e66999752c52573ff0278430
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 67c29f900b7709b73bd0d1e0da26f96cca32828b
Original-Change-Id: Ia2a320acf879fa85e9f6b06265cfe38e50e51e46
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/297744
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11568
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The constants defined in thermal.h are never used since there
is no defined thermal zone. Remove it to result in less code
to worry about in board ports.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=emerge-glados coreboot
Change-Id: Idb716b47875b20e2110741ae9c154cc52307fbcf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 01be180b14b5381a8d339dab6c28428c7ac40c10
Original-Change-Id: Ibb710abc301b18d5632f4e01765ea0374b2fe787
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/297743
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11567
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
To make it easier to port glados to a new board name change
the include headers to use relative path name instead of
including the mainboard name.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=emerge-glados coreboot
Change-Id: I6d184adab5b6b2df970ddd3998d3413f1330c12e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 11dd6b73f298cf4867f4a089478132d5e543ea90
Original-Change-Id: Ia8de127fb176784acbbee975e8b950f8c9824c5c
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/297742
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11566
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Select the EC PD support in kconfig and call the EC early init
code that will reboot into RO for recovery mode.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=boot on glados in recovery mode
Change-Id: Ifa1e2afd91a247c3830d8e705d9d34fb02239fe4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 135ef6e0e2c4864be1c25a9761e04cfe17aec51e
Original-Change-Id: Iac8c092453bfbd94210462be0b377fb77410941d
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/297749
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11573
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Use the new kconfig entry to select the EC PD chip and have it
be rebooted before the EC automatically insetad of being done
manually by the board.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=emerge-samus coreboot
Change-Id: I9e7baffec500a83af1fcf9b1e43d418489172918
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 53b086725d9d595e8eff7e1e35b9ba8db17ca199
Original-Change-Id: I9c9a7dd2ba2b78d681b448839f2c5d15ba9dfe60
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/297748
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11572
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This changes the API to rkclk_configure_cpu() such that we can pass
in the desired APLL frequency in each veyron board's bootblock.c.
Devices with a constrainted form facter (rialto and possibly mickey)
will use this to run firmware at a slower speed to mitigate risk
of thermal issues (due to the RK808, not the RK3288).
BUG=chrome-os-partner:42054
BRANCH=none
TEST=amstan says rialto is noticably cooler (and slower)
Change-Id: I28b332e1d484bd009599944cd9f5cf633ea468dd
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d10af5e18b4131a00f202272e405bd22eab4caeb
Original-Change-Id: I960cb6ff512c058e72032aa2cbadedde97510631
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/297190
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/11582
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch removes a lot of code duplication between the virtually
identical Veyron Chromebook variants by merging the code into a single
directory and handling the different names solely within Kconfig. This
also allows us to easily add all the other Chromebook variants that have
only been kept in Google's firmware branch to avoid cluttering coreboot
too much, making it possible to build these boards with upstream
coreboot out of the box.
The only effective change this will have on the affected boards is
removing quirks for early board revisions (since revision numbers differ
between variants). Since all those quirks concerned early pre-MP
revisions, I doubt this will bother anyone (and the old code is still
available through the Google firmware branch if anyone needs it). It
will also expand a recent fix in Jerry that increased an LCD power-on
delay to make it compatible with another kind of panel to all boards,
which is probably not a bad idea anyway.
Leaving all non-Chromebook boards as they are for now since they often
contain more extensive differences.
BRANCH=None
BUG=None
TEST=Booted Jerry.
Change-Id: I4bd590429b9539a91f837459a804888904cd6f2d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 10049a59a34ef45ca1458c1549f708b5f83e2ef9
Original-Change-Id: I6a8c813e58fe60d83a0b783141ffed520e197b3c
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/296053
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11555
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Clean up the PCI device list comments to be consistent between
the skylake mainboards.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=emerge-glados coreboot
Change-Id: I0080ab21db006365f34995db06480dae68ac547d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fa21f77cbaafbc9ca0b98d6951df92c4349fa28d
Original-Change-Id: Ie70f94dcc12da141d82b4445643cc0cbe08bb766
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/297338
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11561
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The devicetree.cb compiler can't handle C style /**/ comments,
they need to be shell-style #. Due to a last minute formatting
change in my commit to enable USB ports this broke the glados
build.
BUG=chrome-os-partner:44662
BRANCH=none
TEST=emerge-glados coreboot
Change-Id: I46ee4e5a94d61eefbd2c9a1ba3cafcb6a9e7d71b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8fa92f77b3ef13ede1029292d886351ab5ed87d2
Original-Change-Id: Ibff02a4fd6132def81006a2c6502d34bd4b72823
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/296301
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11553
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Enable only the USB ports that are connected on-board or to an
external port, all others will be disabled.
BUG=chrome-os-partner:44662
BRANCH=none
TEST=build and boot on glados, ensure expected USB ports still work
Change-Id: I8c999e3b17478effc39cf078f8420f63413d091b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b86268c70f86991f8c2cdd6763f8efe2ce7f9163
Original-Change-Id: I2fce2c401d07639892c4a0c01527173d3f0b2557
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/296035
Original-Commit-Ready: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11548
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Enable 1866 timings in the 4GB Hynix SPD.
BUG=chrome-os-partner:44394
BRANCH=none
TEST=emerge-glados coreboot
Change-Id: Ibb84f77565d46894afe2153f5951e17a450413fc
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f64d76a5f0b0095be96317674caf8542c3155423
Original-Change-Id: Ic5312176c21afc4569f723f5b7f00283b09262d7
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/295174
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11528
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Some of the Chrome OS boards were directly calling vboot
called in some form after contorting around #ifdef preprocessor
macros. The reasoning is that Chrome OS doesn't always do display
initialization during startup. It's runtime dependent. While
this is a requirement that doesn't mean vboot functions should be
sprinkled around in the mainboard and chipset code. Instead provide
one function, display_init_required(), that provides the policy
for determining display initialization action. For Chrome OS
devices this function honors vboot_skip_display_init() and all
other configurations default to initializing display.
Change-Id: I403213e22c0e621e148773597a550addfbaf3f7e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11490
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Since more boards are starting to use the EC provided keyboard
backlight interface move the code to a common place and allow
it to get included in mainboards.
Change-Id: I3f307bbce1a96cdd1c8224b1e89a63d6fedef738
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: http://review.coreboot.org/11478
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This is just wrong. PAYLOAD_SEABIOS tells us nothing about whether
or not the payload will actually be SeaBIOS:
1. PAYLOAD_SEABIOS, but payload changed with cbfstool
2. !PAYLOAD_SEABIOS, but an elf payload was added which is SeaBIOS
et. cetera.
Change-Id: I4c17e8dde20bf21537f542fda2dad7d3a1894862
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11293
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Damien Zammit <damien@zamaudio.com>
|
|
mainboard_ec_init() wasn't getting run due to an invalid
Kconfig symbol. This check isn't required as the Kconfig
option for the EC is forced to be enabled, and the function
should always be run.
BRANCH=none
BUG=none
TEST=Rebuilt glados mainboard.
Change-Id: I2c4a33d80533a19b02b83b3aaa6a3386e927f1c7
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: edd8c7a0666208b35ee81f57ec2626390958dfb7
Original-Change-Id: I2a92fd28347455c09ecf2119788ca9b6a97a11de
Original-Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/295143
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11435
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Move the gpio pad configuration prior to SiliconInit()
in case there are dependencies of the pads being configured
in prior to SiliconInit().
BUG=chrome-os-partner:43522
BUG=chrome-os-partner:43492
BRANCH=None
TEST=Built and booted glados.
Change-Id: I84f8e965bf205a4945b14a63fa8074953750f785
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 5cce5347449f69ac6cf7030ea3b91d3f8b4cc7f9
Original-Change-Id: I18cd33a455d5635a866abb76142cab516b04f446
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/294642
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11420
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
On proto2 boards the kepler device has its reset line pulled up
to one of its IO rails with a zener in between. This results in the
device not being visible at MemoryInit() time because for some
reason FSP is doing PCIE configuration/probing in that path. Hack
around the broken FSP logic by configuring the pads for kepler's
power and clkreq.
BUG=chrome-os-partner:44326
BRANCH=None
TEST=Built and booted glados. lscpi shows the device on bus 2.
Change-Id: I543eb3ccd3ab5ffacd6efc959e6e2f7a88de78b3
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 67f6b57487e8724b469f74870e0083d4e1dac4d2
Original-Change-Id: I7fe4a707f9321b7bdec4b4be729c5d0dcce65f6e
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/294810
Original-Reviewed-by: Robbie Zhang <robbie.zhang@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11419
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Export the proper GPIO for EC_IN_RW so it can be picked up and
used by depthcharge/vboot.
BUG=chrome-os-partner:43072
BRANCH=none
TEST=build and boot on glados P2
Change-Id: I32d338ef424086ec9701900e976bd0dffe4637a0
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: dd983c84de0c3b896b20d38438a3285cfcaf7e56
Original-Change-Id: I77f7d3a0c0d733302b81273d96026d39b001ed19
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/294712
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11418
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
