summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Collapse)Author
2020-07-05mb/google/kahlee: Drop macro H1_PCH_INTFurquan Shaikh
This change drops H1_PCH_INT macro for GPIO_9 since it is the same across all variants. Also, the name differed from the schematics version `H1_PCH_INT_ODL` creating confusion. Change-Id: I7b038426a984d8abc460a0da3ee1dc5559d7ad5f Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43015 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2020-07-05mb/google/poppy-nocturne: Add SX9310 driver unconditionallyKyösti Mälkki
Change-Id: I11b02cc5f8b59559443329fe0c49a6fb82b7862a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41726 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-04drivers/intel/pmc_mux: Rename con driver to connTim Wawrzynczak
For historical reasons, Windows has issues with certain names being used for files and directories, 'con' or 'CON' being one of them. Therefore, rename the pmc_mux/con driver to pmc_mux/conn in order to work around this issue. TEST=built volteer (only user of this driver as of now) Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ia78dc4efe647c96a7169a3b95fc3b8944d052c83 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43090 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2020-07-03mb/google/volteer: Enable CSE Lite SKU for ES2 platformsJamie Ryu
BUG=b:158140797 TEST=build and boot volteer with CSE Lite SKU Cq-Depend: chrome-internal:3100721 Change-Id: I4f939883617a1271b30c76d41e61113bbdd6ab5b Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42070 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-03mb/google/zork: adjust eSPI virtual irq settingsAaron Durbin
The eSPI polarity macros were reversed. Those are fixed so adjust the corresponding values related to the correct expectations of the IRQ path: eSPI virtual wire IRQs are active level high. The EC sends active level high virtual wire IRQs. The default interrupt encodings in ACPI for P2/S devices are active edge high. Therefore, there is no need to override anything. BUG=b:157984427 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: Ia28d82cd9e432df98839f68bac4eae4447455e53 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43011 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-03mb/google/hatch: Allow USB2/3 wakeups to (un)plug events in WyvernEdward O'Callaghan
V.2: Spare USB routed internally to another peripheral and so no plug event hook needed. BUG=b:1603699358,b:157479891 BRANCH=none TEST=none Change-Id: Ideacac417a46b96f3e82b53bbb341ecce79ee420 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42994 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-03mb/google/hatch: Allow USB2/3 wakeups to (un)plug events in NoibatEdward O'Callaghan
BUG=b:160296662 BRANCH=none TEST=none Change-Id: I5298e1779461995a98722099b397692351767089 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42975 Reviewed-by: Sam McNally <sammc@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-03mb/google/hatch: Allow USB2/3 wakeups to (un)plug events in FaffyEdward O'Callaghan
BUG=b:160295948 BRANCH=none TEST=none Change-Id: I3600340d3448457942c827a463b458b280fea19a Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42974 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sam McNally <sammc@google.com>
2020-07-03mb/google/hatch: Allow USB2/3 wakeups to (un)plug events in KaisaEdward O'Callaghan
BUG=b:160296661 BRANCH=none TEST=none Change-Id: Id5a03f2cbdca2723ab1882c619d2d34387996b27 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42973 Reviewed-by: Sam McNally <sammc@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-03mb/google/hatch: Allow USB2/3 wakeups to (un)plug events in DuffyEdward O'Callaghan
BUG=b:160296325 BRANCH=none TEST=none Change-Id: Iffa6997029d0babfd6dd504a6cc212bd74de3a8f Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42972 Reviewed-by: Sam McNally <sammc@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-02mb/google/zork: Generate I2SM ACPI device at runtimeFurquan Shaikh
This change moves the generation of I2SM ACPI device from static asl file to runtime generation by ACP device driver. dmic_select_gpio is set to match version 3+ of Trembyle and Dalboz schematics. In order to maintain backward compatibility, dmic_select_gpio is updated at runtime using variant_audio_update for board versions that are prior to version 3 of reference schematics. The only difference from static generation is that the device I2SM is added under ACPD (i.e. ACP device) instead of CREC (Chrome EC device). It does not make any functional difference from the kernel perspective. BUG=b:157603026 TEST=Verified that the following device gets generated in SSDT: Scope (\_SB.PCI0.PBRA.ACPD) { Device (I2SM) { Name (_HID, "AMDI5682") // _HID: Hardware ID Name (_UID, One) // _UID: Unique ID Name (_DDN, "I2S machine driver") // _DDN: DOS Device Name Method (_STA, 0, NotSerialized) // _STA: Status { Return (0x0F) } Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings { GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly, "\\_SB.GPIO", 0x00, ResourceConsumer, , ) { // Pin list 0x000D } }) Name (_DSD, Package (0x02) // _DSD: Device-Specific Data { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") /* Device Properties for _DSD */, Package (0x01) { Package (0x02) { "dmic-gpios", Package (0x04) { \_SB.PCI0.PBRA.ACPD.I2SM, Zero, Zero, Zero } } } }) } } Verified audio via speakers and mic input. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I5d1602c7f719eef9487ddea68e429d27408f9a76 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2253638 Commit-Queue: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42971 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-02mb/google/faffy: update DPTF parametersTim Chen
Modify DPTF parameters for faffy from thermal team. BUG=b:160292247 BRANCH=None TEST=emerge-puff coreboot chromeos-bootimage verify the parameters are correct Change-Id: Ie8290f5460838f785a587c85b2ab7dd171dd0a54 Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42977 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Sam McNally <sammc@google.com>
2020-07-01mb/google/zork: Move EC wake to happen in ramstageFurquan Shaikh
Currently, EC wake signal (GPIO_24) is configured early on in romstage. However, there is no need for that since EC wake is not really required to be configured until ramstage. This change moves GPIO_24 configuration to happen in ramstage. BUG=b:159832123 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I6949dcd7c866df2fa028c7b2e7f347cec988e309 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42952 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-01mb/google/zork: Fix pad configurations for wake signalsFurquan Shaikh
This change updates the pad configurations for wake lines as follows: 1. Pen eject wake signal needs to be configured as PAD_WAKE i.e. wake using GPIO controller block. This is because pen eject signal is not dual routed and the trigger filtering is set by the kernel driver differently for S0 and S3 wake. Hence, it cannot use SCI GEVENT and instead has to fall back to using GPIO controller wake. 2. All other wake signals (EC, trackpad, fingerprint) need to be configured as SCI. This allows OS to enable/disable wake from these sources if required. Example: powerd disables wake from trackpad when in tablet mode. Hence, all other wake sources use SCI. BUG=b:159832123 TEST=Verified wake using pen eject and EC. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Id8cd5926f223db51a689ed8948040b8070cf1680 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42951 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-01mb/google/dedede: set tcc_offset value to 10Sumeet R Pawnikar
Set tcc_offset value to 10 in devicetree for Thermal Control Circuit (TCC) activation feature. BUG=None BRANCH=None TEST=Built for dedede platform and verified the MSR value Change-Id: I53d1bd413c64643cf8bdaef266bde25a2f3a97ee Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42906 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-01mb/google/zork/var/morphius: Enable support for garaged stylusFurquan Shaikh
This change adds support for pen insert/eject operations in S0 and wake on pen eject from S3 for morphius. BUG=b:158814699,b:158719244 Change-Id: I3530a0aa83ec69559436687205c64524b862799b Signed-off-by: Kevin Chiu <kevin.chiu@quanta.corp-partner.google.com> Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42950 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-01mb/google/zork: Drop unused/unnecessary GPIO macrosFurquan Shaikh
This change drops macros for GPIOs which are unused or don't really require extra indirection (same across all variants). BUG=b:159283649 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I1a94327103a419f26b1d7feda4c995363ada7281 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42941 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-01mb/google/zork/var/ezkinil: Fix GPIO_86 configuration for bid3Furquan Shaikh
Board version 3 for Ezkinil follows Trembyle reference v3.51 schematics and hence GPIO_86 does not need a variant specific override. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I7e04baad976f94d0d94e7196f0408c3c3237b2da Reviewed-on: https://review.coreboot.org/c/coreboot/+/42940 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-01mb/google/zork: Drop GPIO_27 configuration for trembyle referenceFurquan Shaikh
This change drops GPIO_27 configuration for trembyle reference boards since it is unused. BUG=b:159453643 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I57dd78e8abcc61802ca85158e7ff348460ad1d8e Reviewed-on: https://review.coreboot.org/c/coreboot/+/42939 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-01mb/google/zork: Add support for active low wifi power enableFurquan Shaikh
A late change went into v3+ of reference schematics which inverted EN_PWR_WIFI to meet PCIe reset/power timings for WiFi device. This is incorporated into v3.51+ for Trembyle reference and v3.2+ for Dalboz reference. However, some variants are built with v3+ reference schematics, but without the inversion of EN_PWR_WIFI polarity. Thus, we need to add support for following combinations: 1. Pre-v3 Schematics 2. V3+ Schematics 3. V3+ Schematics + Active low wifi power This change adds a new Kconfig `VARIANT_MIN_BOARD_ID_WIFI_POWER_ACTIVE_LOW` that sets the minimum board ID that has EN_PWR_WIFI active low in hardware. Variants that missed this change in V3+ integration (berknip and vilboz) have board IDs set to VARIANT_MIN_BOARD_ID_V3_SCHEMATICS + 1. For others, this defaults to VARIANT_MIN_BOARD_ID_V3_SCHEMATICS. BUG=b:159749536 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ib8da7fba5f4a518a51b203d6a01a9551e261d8b6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42938 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-01mb/google/zork: Move GPIO sleep table to dalboz and trembyle referenceFurquan Shaikh
This change moves variant_sleep_gpio_table() definition to dalboz and trembyle references to allow each to make their own changes. BUG=b:159749536, b:159453643 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I15b19cea05f1a540c56b6bc0507306d2348ac17f Reviewed-on: https://review.coreboot.org/c/coreboot/+/42937 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-01mb/google/zork: Move PCIE_RST1_L deassertion to happen early for dalbozFurquan Shaikh
This change moves PCIE_RST1_L deassertion to happen as part of variant_pcie_power_reset_configure() instead of variant_romstage_entry() since romstage is guaranteed to run 100ms+ after PP3300_NVME is enabled. This is one of the first things that coreboot on x86 does as part of early mainboard configuration. Additionally, this change also drops deassertion of PCIE_RST0_L on bid 1 for dalboz since PCIE_RST0_L is already deasserted much earlier in the boot flow. BUG=b:152582706 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ib734aa6ff664268e68388b1997ddce676504f8d2 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2261996 Reviewed-by: Aaron Durbin <adurbin@google.com> Commit-Queue: Aaron Durbin <adurbin@google.com> Tested-by: Aaron Durbin <adurbin@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42936 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-01mb/google/zork: Configure GPIO_40 as drive low in sleep pathFurquan Shaikh
This change configures GPIO_40 (NVME_AUX_RESET_L) as drive low in sleep path so that the PERST# to NVMe device keeps asserted until coreboot reconfigures it as high on S3 resume path. This is similar to the earlier change for PCIE_RST1_L but helps platforms that use NVME_AUX_RESET_L instead of PCIE_RST1_L. GPIO_40 lives in S5 domain, hence it retains state across S3 entry/exit. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ie79e946eee8f393863630226ae2183e653030415 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2261117 Reviewed-by: Aaron Durbin <adurbin@google.com> Commit-Queue: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42935 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-01mb/google/zork: Reconfigure PCIE_RST1_L as GPO driven low on sleep pathFurquan Shaikh
This change configures PCIE_RST1_L as GPO driven low on the sleep path. This is required to keep PERST# asserted to devices until coreboot deasserts it on S3 resume path. Without this change, on S3 resume, PCIE_RST1_L gets deasserted sooner than required resulting in violation of PCIe reset timings. With this change, the behavior of PCIE_RST1_L is as follows: 1. GPIO27 is configured as NF (PCIE_RST1_L) in coreboot bootblock/romstage and driven high. 2. On S3 entry, GPIO27 is configured as GPO driven low. * Boot out of G3: Timing should be met since GPIO_27 is pulled down by default until coreboot configures it. * S3 resume: Timing should be met since GPIO_27 is configured as GPO low and it retains state across S3 entry/exit. So, should be low until coreboot configures it. * Warm reset: Timing should be met since it is configured as NF. So, hardware guarantees the reset timing as seen in "warm reset.jpg" in #46. BUG=b:152582706 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ia0ad1522edc438fd054d927ef4a2ab5c27329c00 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2261116 Reviewed-by: Aaron Durbin <adurbin@google.com> Commit-Queue: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42934 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-01mb/google/zork: Turn off power to camera and pen in sleep pathFurquan Shaikh
This change turns off power to camera and pen devices when entering sleep since they do not act as wake sources in S3. Power to trackpad and WiFi is left enabled since they are wake sources for S3. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I21bcdd53370372c7d43c3b685abb2a9171e42d22 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2261115 Reviewed-by: Aaron Durbin <adurbin@google.com> Commit-Queue: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42933 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-01mb/google/zork: Add support for GPIO configuration on sleep pathFurquan Shaikh
This change adds support to configure GPIOs on the sleep path. This is required to turn off power to devices that do not act as wake sources and to assert reset to devices. Currently, variant_sleep_gpio_table() returns an empty table by default. In the following changes, entries will be added to gpio_sleep_table. BUG=b:152582706 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I7286cbf165024bdd81f8748e525542dce8dd8702 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2253642 Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-by: Aaron Durbin <adurbin@google.com> Commit-Queue: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42932 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-01mb/google/nightfury: Override VBT selection for nightfury 2nd skuSeunghwan Kim
Override VBT for nightfury SKU_ID = 2 to support different panel. BUG=b:159051021 BRANCH=firmware-hatch-12672.B TEST=Built and verified using different VBT by SKU_ID Change-Id: I9450814aadc43cc7991457c3793f109b889186b9 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42904 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bob Moragues <moragues@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-07-01mb/google/zork: update G2 TS RST delay timeKevin Chiu
in some m/b+BOE panel(G2 TS), G2 TS may still have chance to lost even rst delay time already meets spec definition: 10us (minimum). Restore G2 TS RST delay time to 50ms, we could have G2 TS working fine on those specific m/b+BOE(G2 TS) panel. BUG=b:159510906 BRANCH=master TEST=emerge-zork coreboot boot with G2 TS, make sure G2 TS is functional Change-Id: Ic629c6c61572ab564def8893ce8d78dfb37d4590 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42867 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-01ACPI GNVS: Replace uses of smm_get_gnvs()Kyösti Mälkki
Change-Id: I7b657750b10f98524f011f5254e533217fe94fd8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42849 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-07-01mb/google/octopus/variants/dood: fix disable_xhci_lfps_pm by skuKenneth Chan
due to overridetree.cb set disable_xhci_lfps_pm = 0, need correct condition expression to let function work. BUG=b:155955302 BRANCH=octopus TEST=build coreboot with DisableXhciLfpsPM being set to 1 and flash the image to the device. Run following command to check if bits[7:4] is set 0: >iotools mmio_read32 "XHCI MMIO BAR + 0x80A4" Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Change-Id: Ia047c75611a35aafd15f2481bf64049e13d4a2ff Reviewed-on: https://review.coreboot.org/c/coreboot/+/42860 Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Henry Sun <henrysun@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-30soc/amd/gpio, mb/{amd,google}: Configure pads using a single entry in GPIO ↵Furquan Shaikh
configuration table Currently, for Stoneyridge and Picasso mainboards, pads that are configured for SCI/SMI/WAKE need to have multiple entries in the configuration table - one for PAD_GPI and other for the special configuration that is required. This requires a very specific ordering of pads within the table and is prone to errors because of conflicting params provided to the different entries for the same pad. This also does not work very well with the concept of override GPIOs where the entry in base table is overridden with the first matched entry from the override table. This change updates the way GPIO configuration is handled for special routing like SCI/SMI/WAKE/DEBOUNCE by setting the control field of soc_amd_gpio structure in the macros performing these configurations. Also, program_gpios() is updated to perform a write to GPIO control register instead of read-modify-write. This is because mainboard is expected to provide only a single configuration entry for each pad within a given table. Thus, there is no need to preserve earlier configuration. Mainboards that were providing multiple entries for a single pad are updated accordingly. BUG=b:159944426 Change-Id: I3364dc2982d66c4e33c2b4e6b0b97641ebea27f0 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42875 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-30mb/google/kahlee: Do not enable SCI for H1_PCH_INT_ODLFurquan Shaikh
H1 is not a wake source and hence there is no need to configure SCI GEVENT for it. This change drops PAD_SCI() configuration for GPIO_9 i.e. H1_PCH_INT_ODL. BUG=b:159944426 Change-Id: Iec2285b76f9c5fa1b4b1be15128fea316fa04555 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42874 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-06-30mb/google/hatch: Allow USB2/3 wakeups to (un)plug events in dtEdward O'Callaghan
BUG=b:159187889 BRANCH=none TEST=none Change-Id: I13626a236f1b7385208c4181150f094cbda490ed Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42714 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sam McNally <sammc@google.com>
2020-06-30mb/google/volteer: set tcc_offset value to 10Sumeet R Pawnikar
Set tcc_offset value to 10 in devicetree for Thermal Control Circuit (TCC) activation feature. BUG=None BRANCH=None TEST=Built for volteer platform and verified the MSR value Change-Id: I6438547e09a3ff3a1c01addfcc01383e89f5b435 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42902 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-06-30ACPI: Drop typedef global_nvs_tKyösti Mälkki
Bring all GNVS related initialisation function to global scope to force identical signatures. Followup work is likely to remove some as duplicates. Change-Id: Id4299c41d79c228f3d35bc7cb9bf427ce1e82ba1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42489 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-30mb/google: Drop aliases for APM_CNT_ACPI_xxKyösti Mälkki
Use defines found in <cpu/x86/smm.h>. Change-Id: Ib75df13021120fb2c056782c252e97d6b036c7da Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42848 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-06-28soc/amd/common: Access ACPIMMIO via proper symbolsKyösti Mälkki
Using proper symbols for base addresses, it is possible to only define the symbols for base addresses implemented for the specific platform and executing stage. Change-Id: Ib8599ee93bfb1c2d6d9b4accfca1ebbefe758e09 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37324 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-28mb/google/zork: update DRAM SPD table for berknipKevin Chiu
samsung-K4A8G165WC-BCWE_x1 # 0b0101 micron-MT40A1G16KD-062E-E_x2 # 0b0110 hynix-H5ANAG6NCMR-XNC_x2 # 0b0111 samsung-K4AAG165WA-BCWE_x2 # 0b1000 BUG=b:159418772 BRANCH=master TEST=emerge-zork coreboot Change-Id: I24b632c75d4a0660dc6beb88f135b546860d7079 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42814 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-28mb/google/zork: update telemetry settings for berknipKevin Chiu
update telemetry to improve the performance. BUG=b:154879805 BRANCH=master TEST=emerge-zork coreboot verify by Stardust test Change-Id: Iae5486cf2ee26b3d8e6124edfff4fe2d1fbe211e Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42817 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-28mb/google/zork: add G2 TS support for berknipKevin Chiu
Add G2 GTCH7503 HID TS support BUG=b:159510906 BRANCH=master TEST=emerge-zork coreboot boot with G2 TS, make sure G2 TS is functional Change-Id: Id9ed5fc768459edc4660ddd6fbffb0b1973ce6d1 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42813 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-06-28mb/google/zork: update telemetry settings for morphiusKevin Chiu
update telemetry to improve the performance. BUG=b:154863613 BRANCH=master TEST=emerge-zork coreboot Change-Id: Ia08259e81f360259f23ea0f9c5c128c9d0961322 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42815 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-28mb/google/zork: update DRAM SPD table for morphiusKevin Chiu
Add Samsung K4A8G165WC-BCWE x2 BUG=b:159418770 BRANCH=master TEST=emerge-zork coreboot Change-Id: I200a1074d3c9fe79a8a2c69f42b0612e745f36f5 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42816 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-28mb/google/reef/variants/: add Samsung K4F8E3S4HD-MGCL supportKevin Chiu
Add Samsung K4F8E3S4HD-MGCL DRAM support. DRAMID: 0x8 BUG=b:145094527 BRANCH=master TEST=emerge-snappy coreboot chromeos-bootimage Change-Id: Ic450c4abebfeaed050a7b8fcae74b87a148dd5cd Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42772 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-28mb/google/faffy: Enable USB2 port6Tim Chen
Due to faffy has PL-2303 connect to USB2 port6(count from port0), needs to enable it. BUG=b:159760559 BRANCH=None TEST=emerge-puff coreboot chromeos-bootimage boot on puff board Change-Id: Icc805757b043e7fac4d05188cbf2f9c9c56c2a2e Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42766 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-06-28soc/amd/picasso/soc_util: rework reduced I/O chip detectionFelix Held
Both Dali and Pollock chips have less PCIe, USB3 and DisplayPort connectivity. While Dali can either be fused-down PCO or RV2 silicon, Pollock is always RV2 silicon. Since we have all boards using this code in tree right now, soc_is_dali() can be renamed and generalized to soc_is_reduced_io_sku(). Change-Id: I9eb57595da6f806305552128b0c077ceeb7c4661 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42833 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Rob Barnes <robbarnes@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-28gpio_keys: Allow boards to configure different wakeup routesFurquan Shaikh
This change allows mainboard to configure different wakeup routes that can be used by a GPIO key: 1. SCI: This is selected when SCI route is used to wake the system. It results in _PRW property being exposed in ACPI tables. 2. GPIO IRQ: This is selected when GPIO controller wake is used to wake the system. It is typically used when the input signal is not dual routed and the GPIO controller block is not capable of applying filters for IRQ and wake separately. In this case, _PRW is not exposed in ACPI tables for the key device. 3. Disabled: No wakeup supported. Based on these wakeup routes, gpio_keys_add_child_node() is updated to expose _PRW and _DSD properties for wakeup appropriately. Additionally, the change updates mainboards that were already using gpio_keys to set wakeup_route attribute correctly and renames "wake" to "wake_gpe" to make the usage clear. BUG=b:159942427 Change-Id: Ib32b866b5f0ca559ed680b46218454bdfd8c6457 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42826 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-06-26Revert "Mushu: Enable PCIe 1d.4 to enable dgpu"Shelley Chen
This reverts commit 1408798637125f1707ded7215e22461c623a79a8. Reason for revert: Causing backlight issues in device. Will reland after more debugging to figure out the root cause. BUG=b:159370566 BRANCH=None TEST=boot up device and make sure when kernel is booted, backlight comes up. Change-Id: I643854c6c805d262539bbb482808e8c322059a49 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42583 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2020-06-26mb/google/zork/Kconfig: remove unused option IRQ_SLOT_COUNTFelix Held
That option is only relevant if the boards selects HAVE_PIRQ_TABLE which it doesn't. Change-Id: Ib5839a42f5133f5f84e1e1e4e587801b916ca571 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42787 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-06-26mb/google/hatch: Set Reset Power Cycle Duration for hatch platformsSridhar Siricilla
Currently, Reset Power Cycle Duration is set with default value (4s). This adds around ~5 seconds of delay during power cycle or global reset. So, this patch sets PchPmPwrCycDur (Reset Power Cycle Duration) to 1s to minimize the delay. Delay with Power Cycle or Global Reset: Existing behaviour: S0->S5 -> [ ~5 seconds delay ] -> S5->S0 With the patch: S0->S5 -> [ ~2 seconds delay ] -> S5->S0 Also, correct the comment mentioned for PchPmSlpAMinAssert. The value(3) defined for PchPmSlpAMinAssert triggers signal assertion width to 98ms not 2s. Test=Verified on Hatch and Puff boards BUG=b:158634281 Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I368c6716a92e06903a872f9e87ae0698eab95bdd Reviewed-on: https://review.coreboot.org/c/coreboot/+/42441 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-25mb/google/volteer: Enable HECI interfaceJamie Ryu
This is to enable Intel ME communication interface HECI1 by devicetree for PAVP with CSE Lite. BUG=b:159615125 TEST=Build and boot volteer. Run lspci and check pcie device 00:16.0 Communication controller: Intel Corporation Device a0e0 Change-Id: I68eb51c6a0af77982c060767993265764a2bc926 Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42308 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-06-25mb/google/octopus/variants/bobba: fix disable_xhci_lfps_pm by skuSheng-Liang Pan
due to overridetree.cb set disable_xhci_lfps_pm = 0, need correct condition expression to let function work. BUG=b:146768983 BRANCH=octopus TEST=build coreboot with DisableXhciLfpsPM being set to 1 and flash the image to the device. Run following command to check if bits[7:4] is set 0: >iotools mmio_read32 "XHCI MMIO BAR + 0x80A4" Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: I53621d7674a531adfa40e8703cb2cd01c50376b8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42564 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Marco Chen <marcochen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-25mb/google/zork: Move PCIE_RST0_L configuration to early GPIO tableFurquan Shaikh
This change moves the configuration of PCIE_RST0_L as native function to happen in early GPIO table. This ensures that the PERST# signal is deasserted as soon as possible when the system comes out of sleep state in case the sleep path asserted/deasserted the PERST# as GPIO out. A big difference in functionality with this change is that PCIE_RST0_L signal is now configured as part of RO, which should be fine since all PCIe devices have a second AUX_RESET_L signal or use PCIE_RST1_L to control the actual reset to the device. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I21a9c25b5a8a6d502cdb79cbe0dbad6ef98d6d63 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42739 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-25mb/google/zork: Add support for WiFi power sequencingFurquan Shaikh
This change replaces variant_wifi_romstage_gpio_table() with variant_pcie_power_reset_configure() to handle the reset and power sequencing for WiFi devices pre- and post- v3 version of schematics. These are the requirements that need to be satisfied: 1. As per PCI Express M.2 Specification Revision 3.0, Version 1.2, Section 3.1.4 "Power-up Timing", PERST# should stay disabled until `TPVPGL` time duration after device power has stabilized. Value of TPVPGL is implementation specific. 2. For Intel WiFi chip, it is known to get into a bad state if the above requirement is violated and hence requires a power cycle. 3. On pre-v3 schematics: - For both dalboz and trembyle references, GPIO42 drives WIFI_AUX_RESET_L which is pulled up to PP3300_WIFI. - For both dalboz and trembyle references, PP3300_WIFI is controlled using GPIO29. This pad gets pulled high by default on PWRGOOD because of internal pull-up. But, at RESET# it is known to have a glitch. When GPIO29 gets pulled high, it causes WIFI_AUX_RESET_L to be pulled high as well. This violates the PCIe power sequencing requirements. Hence, for pre-v3 schematics on both dalboz and trembyle, following sequence needs to be followed: a. Assert WIFI_AUX_RESET_L. b. Disable power to WiFi. c. Wait 10ms to allow WiFi power to go low. d. Enable power to WiFi. e. Wait 50ms as per PCIe specification. f. Deassert WIFI_AUX_RESET_L. 4. On v3 schematics: - For trembyle: WIFI_AUX_RESET_L is driven by GPIO86 which has an internal PU as well as an external PU to PP3300_WIFI. - For dalboz: WIFI_AUX_RESET is driven by GPIO29. This is active high and has an internal PU. It also has an external 1K PD to overcome internal PU. - For both dalboz and trembyle references, PP3300_WIFI is controlled by GPIO42 which has an internal PU and external PD. Trembyle schematics have a comment saying strong PD of 2.2K but the stuffed resistor is a weak one (499K). ON dalboz, it uses a weak PD (which doesn't look correct and instead should be a strong PD just like trembyle). Having a strong PD ensures that the WiFi power is kept disabled when coming out of G3 until coreboot configures GPIO42 as high. - Thus, for v3 schematics, following sequence needs to be followed: a. Assert WIFI_AUX_RESET{_L} signal. b. Enable power to WiFi. c. Wait 50ms as per PCIe specification. d. Deassert WIFI_AUX_RESET{_L} signal. BUG=b:157686402, b:158257076 TEST=Verified that QCA and AX200 cards both continue working. Tested QCA on Dalboz and Trembyle. Tested AX200 on morphius. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I532131ee911d5efb5130d8710f3e01578f6c9627 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42738 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-25mb/google/zork: Update ramstage GPIOs for v3 schematics for dalboz referenceFurquan Shaikh
This change updates the baseboard GPIO table in ramstage to match v3 version of dalboz reference schematics. All variants using this reference are accordingly updated to configure the GPIOs that changed as part of v3 schematics. BUG=b:157165628, b:157744136, b:157743835 TEST=Compiles Signed-off-by: Martin Roth <martinroth@chromium.org> Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: If9d0e35801f9f9b15eddeb4ec7068fed6d401307 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2251394 Commit-Queue: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> Auto-Submit: Furquan Shaikh <furquan@chromium.org> Reviewed-by: Eric Peers <epeers@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42725 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-25mb/google/zork: Update ramstage GPIOs for v3 schematics for trembyle referenceFurquan Shaikh
This change updates the baseboard GPIO table in ramstage to match v3 version of trembyle reference schematics. All variants using this reference are accordingly updated to configure the GPIOs that changed as part of v3 schematics. BUG=b:157088093, b:154676993, b:157098434 TEST=Compiles Signed-off-by: Martin Roth <martinroth@chromium.org> Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ib1d6ee2e995c1fca229c20ea63da9a45fb89f64a Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2251393 Reviewed-by: Aaron Durbin <adurbin@google.com> Commit-Queue: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42724 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-25mb/google/zork: Update _v3 romstage and wifi GPIO tables for dalbozFurquan Shaikh
This change updates _v3 version of romstage and wifi GPIO tables to match v3 schematics. BUG=b:157165628, b:157744136, b:157743835 TEST=Compiles Signed-off-by: Martin Roth <martinroth@chromium.org> Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Id8b46fcb4552af6eda5b50224b0557bae37f9ebd Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2251392 Reviewed-by: Aaron Durbin <adurbin@google.com> Commit-Queue: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42723 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-25mb/google/zork: Update _v3 romstage and wifi GPIO tables for trembyleFurquan Shaikh
This change updates _v3 version of romstage and wifi GPIO tables to match v3 schematics. BUG=b:157088093, b:154676993, b:157098434 TEST=Compiles Signed-off-by: Martin Roth <martinroth@chromium.org> Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ic605559b3226e2ad9b5b3f3fa45c4aa9f9b5fe22 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2251391 Reviewed-by: Aaron Durbin <adurbin@google.com> Commit-Queue: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42722 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-25mb/google/zork: Prepare variants for v3 schematicsFurquan Shaikh
This change updates variant_romstage_gpio_table() and variant_wifi_romstage_gpio_table() to support v3 version of schematics for dalboz and trembyle reference designs. gpio_set_stage_rom and gpio_set_wifi are divided into two groups: a) Pre-v3 (GPIO table for pre v3 schematics): * gpio_set_stage_rom_pre_v3 * gpio_set_wifi_pre_v3 b) v3 (GPIO table for v3+ schematics): * gpio_set_stage_v3 * gpio_set_wifi_v3 Currently, both _v3 is a copy of _pre_v3, but will be updated in follow-up CLs to make it easier to identify what changed from _pre_v3 to _v3. BUG=b:157088093, b:154676993, b:157098434, b:157165628, b:157744136, b:157743835 TEST=Compiles Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I444875d93100c2f2abdb6dec4312861fd89d9b78 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2251390 Commit-Queue: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42721 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-25mb/google/zork: Drop RAM_ID configuration from romstage gpio tableFurquan Shaikh
RAM_ID GPIOs are configured by ABL based on the information added to APCB. coreboot does not need to configure these pads. This change drops the RAM_ID configuration from trembyle baseboard. Dalboz never really configured RAM_IDs in coreboot. BUG=b:154351731 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ie1dfcc3c185304d917ab4386920445ba0119ac69 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2252710 Commit-Queue: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42720 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-25mb/google/zork: Move variant_early_gpio_table to gpio_baseboard_common.cFurquan Shaikh
This change moves the GPIOs that need to be configured for early access in coreboot to early_gpio_table[] in gpio_baseboard_common.c. These GPIOs include: * Pads to talk to EC * Pads to talk to TPM * Pads to talk to serial console These should be configured in the first stage that runs coreboot i.e. in case of VBOOT_STARTS_BEFORE_BOOTBLOCK, it should be done as part of verstage (which starts on PSP), else it should be done as part of bootblock (which is the first stage that runs on x86). This change drops GPIO_137 from early_gpio_table since that is not really required in early stages. BUG=b:154351731 TEST=Verified that trembyle still boots. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ifbdbb02cbfc65ddb68f0ae75cf4b1f2ea1656b91 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2252709 Commit-Queue: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42719 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-06-24jasperlake: enable DPTF functionality for dededeSumeet R Pawnikar
Enable DPTF functionality on jasperlake based dedede platform BRANCH=None BUG=None TEST=Built for dedede system Change-Id: I17b6e4e96abee6181b0d1f94c356a32aa82c19b9 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41668 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-24mb/google/zork: Add UPD xhci0_force_gen1 for Trembyle and EzkinilLucas Chen
Add UPD xhci0_force_gen1 for Trembyle and Ezkinil. The default setting is set to disable, and set enabled for Ezkinil. Trambyle -> set default as disable. Ezkinil -> set enable by request. BUG=b:156314787 BRANCH=trembyle-bringup TEST=Build. Verified the setting will be applied on Ezkinil/Trembyle. Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com> Change-Id: I65d06bfe379f9e42101bfae1a02a619ee2f24052 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2216090 Reviewed-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42217 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Eric Peers <epeers@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-24mb/google/volteer/malefor: Update overridetree.cbWilliam Wei
1) Based on malefor schematics, disable unused I2C port, USB port, TBT PCIe 2) Add audio device to the tree BUG=b:150653745, b:154973095 TEST=FW_NAME=malefor emerge-volteer coreboot chromeos-bootimage Boot to kernel and check the devices' function worked properly. Signed-off-by: William Wei <wenxu.wei@bitland.corp-partner.google.com> Change-Id: I9ce465705e8b8f67ddbc9e4eb06c5a8bfac65fcb Reviewed-on: https://review.coreboot.org/c/coreboot/+/42246 Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-24volteer: Create volteer2 variantNick Vaccaro
Create the volteer2 variant of the volteer reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.1.1). Modified to alphabetize and update to duplicate latest volteer changes currently in the review and merge pipeline. Added the following missing files from the variants/volteer2/ folder: - gpio.c - include/variant/acpi/dptf.asl - acpi/mipi_camera.asl - Makefile.inc - memory/dram_id.generated.txt - memory/Makefile.inc - memory/mem_list_variant.txt - overridetree.cb BUG=b:159135047 BRANCH=None TEST=util/abuild/abuild -p none -t google/volteer -x -a make sure the build includes GOOGLE_VOLTEER2 Change-Id: I987c72b83dc993af248a753a2caa56be0f26c1ad Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42605 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: YH Lin <yueherngl@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-24ACPI: Replace uses of CBMEM_ID_ACPI_GNVSKyösti Mälkki
These are the simple cbmem_find() cases. Also drop the redundant error messages. Change-Id: I78e5445eb09c322ff94fe4f65345eb2997bd10ef Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42361 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-06-24volteer: Create delbin variantZhuohao Lee
Create the delbin variant of the volteer reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.1.1). BUG=b:158797761 BRANCH=None TEST=util/abuild/abuild -p none -t google/volteer -x -a make sure the build includes GOOGLE_DELBIN Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Change-Id: Icf5fc6b9cc6a7c47e52103b2d396bcddb26adf50 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42709 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-23hatch: Create wyvern variantPaul Fagerburg
Create the wyvern variant of the puff reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.1.1). BUG=b:158269582 BRANCH=None TEST=util/abuild/abuild -p none -t google/hatch -x -a make sure the build includes GOOGLE_WYVERN Signed-off-by: Paul Fagerburg <pfagerburg@google.com> Change-Id: Id7a090058d2926707495387f7e90b3b8ed83dac7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42551 Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-23hatch: Create faffy variantEdward O'Callaghan
Create the faffy variant of the puff reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.1.1). V.2: Manually modified to keep Kconfig sorted. BUG=b:157448038 BRANCH=None TEST=util/abuild/abuild -p none -t google/hatch -x -a make sure the build includes GOOGLE_FAFFY Signed-off-by: Edward O'Callaghan <quasisec@google.com> Change-Id: I5f14c2d6144ce3c2e48488ca81f31b3c04dc5fb9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42717 Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-23mb/google/zork: Add support for fingerprint deviceFurquan Shaikh
This change adds support for fingerprint device in overridetree for the following variants: 1. berknip 2. morphius 3. trembyle Generates the following node in SSDT1: Scope (\_SB.FUR1) { Device (CRFP) { Name (_HID, "PRP0001") // _HID: Hardware ID Name (_UID, Zero) // _UID: Unique ID Name (_DDN, "Fingerprint Reader") // _DDN: DOS Device Name Method (_STA, 0, NotSerialized) // _STA: Status { Return (0x0F) } Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings { UartSerialBusV2 (0x002DC6C0, DataBitsEight, StopBitsOne, 0x00, LittleEndian, ParityTypeNone, FlowControlNone, 0x0040, 0x0040, "\\_SB.FUR1", 0x00, ResourceConsumer, , Exclusive, ) GpioInt (Level, ActiveLow, ExclusiveAndWake, PullDefault, 0x0000, "\\_SB.GPIO", 0x00, ResourceConsumer, , ) { // Pin list 0x0006 } }) Name (_S0W, 0x04) // _S0W: S0 Device Wake State Name (_PRW, Package (0x02) // _PRW: Power Resources for Wake { 0x0A, 0x03 }) Name (_DSD, Package (0x02) // _DSD: Device-Specific Data { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") /* Device Properties for _DSD */, Package (0x01) { Package (0x02) { "compatible", "google,cros-ec-uart" } } }) } } BUG=b:147853944 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I7ccb3633332ce3e388293872af7b22f1867c8465 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42082 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-06-23palkia: separate the gpio pins control for the second touchZhuohao Lee
There are two touch screen controllers on the Palkia device. One is on the lid; another is on the base. To support the different control path (for example: turning off the base's touch event when we don't want to use it however still keeping the lid's touch event), we use the different gpio pins to control the second touch. As a result, we need to modify the devicetree to adopt this change. With this change, we can control the primary and secondary touch screen controller respectively. BUG=b:149714955 TEST=lid/base touch screen works correctly Change-Id: I1f896e334e51c78300af724cbef8d57641ae5612 Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42185 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-23mb/google/hatch: Make puff and variants share common mainboard.cEdward O'Callaghan
Here we consolidate some of the mainboard.c duplication between Puff and it's variants. Customizations can be done later via introducing a devicetree parameterisation. BUG=b:154071868 BRANCH=none TEST=none Change-Id: I75c2de7ae8efd544d800bc77e34e667c3afa4b01 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42672 Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-22mb/google/volteer/variants/terrador: Enable Cmd MirrorDavid Wu
Enable CmdMirror for Terrador to achieve optimum routing from SoC to DRAMs BUG=b:156435028 BRANCH=none TEST=FW_NAME=terrador emerge-volteer coreboot chromeos-bootimage Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I0db9fff0dddf35c99a6cb2a90d40886ed8e18686 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42274 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-06-22mb/google/volteer/variants/volteer: clean up gpio.cNick Vaccaro
Remove an unneccessary comment and group the variant_early_gpio_table together based on GPIO group. Changed static variable name gpio_table to override_gpio_table to be more descriptive. BUG=none TEST="emerge-volteer coreboot chromeos-bootimage", flash and boot volteer to kernel. Change-Id: Iabe810df1e5a3df35e3543ab81b9fdb6f76c223a Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42577 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-22mb/google/volteer: move volteer devices to overridetree.cbNick Vaccaro
Move the following volteer-specific devices from baseboard's devicetree.cb into volteer's overridetree.cb file: - Goodix Touchscreen - ELAN Touchscreen - ELAN Touchpad - SAR0 Proximity Sensor Adjust the other variant's overridetree.cb files to correspond to the changes made to the baseboard's devicetree.cb in this change. BUG=b:159241303, b:154646959 TEST='emerge-volteer coreboot chromeos-bootimage', flash and boot volteer to kernel and verify that the trackpad works. Change-Id: I30f8266ec87a7cde293c84d3e687d133207b8d59 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42550 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-06-22mb/google/volteer: update fw_config definitionNick Vaccaro
Update fw_config definition in devicetree.cb to match current definition for volteer. BUG=b:159157584 TEST=none Change-Id: I761893818231880d86fd13cfa61319157d06a7d5 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42331 Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-22mb/google/volteer: Disable D3Cold for TCSS along with pass through modeJohn Zhao
The pass through mode (SW CM) RTD3 is not supported until QS platform. D3Cold is needed to be disabled along with upstream TBT firmware signed_TGL_HR_4C_A0_rev6_pre4_SW_CM_PM_support_ENG_VER_perst_check_fix. This temporary patch will need to be reverted once PM RTD3 support is validated on QS platform. BUG=b:159050315 TEST=Verfiy PM S0ix along with upstream TBT firmware. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I98ed991e4185abf1f3168e33b099e0e97c9075f6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42504 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Divya Sasidharan <divya.s.sasidharan@intel.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-22mb/google/volteer: Override power limits with SKU-specific limitsTim Wawrzynczak
Using guidance from Intel, a new set of power limits (PL1, PL2 & PL4) are available for TGL-U. They are dependent upon the SKU of the CPU that the mainboard is running on. Volteer is updated here to use these new limits. To accomplish this, the SoC chip config's power_limits_config member was expanded to an array, which can be indexed by POWER_LIMITS_*_CORE macros. Just before power limits are applied, the correct set of them is chosen from the array based on System Agent PCI ID. Therefore, a TGL board should have two sets of power limits available in the devicetree. BUG=b:152639350 TEST=On a Volteer SKU4 (4-core), verified the following console output: CPU PL1 = 15 Watts CPU PL2 = 60 Watts CPU PL4 = 105 Watts Change-Id: I18a66fc3aacbb3ab594b2e3d6e2a4ad84c10d8f0 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42436 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2020-06-22mb/google/kukui: Add Hynix 4GB discrete LPDDR4X DDR supportHuayang Duan
Support 4GB H9HCNNNCPMMLXR-NEE discrete DDR bootup. BUG=b:156691665 BRANCH=none TEST=Boots correctly and stress test passes on Kukui. test cmd: memtester 1000M Change-Id: I0b29cc1cf0d51eb9d6af112858563193ffa88652 Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42502 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-22mb/google/volteer: Change VCM and EEPROM configs for ov8856Daniel Kang
TGL RVP and Volteer use ov8856 camera module from different vendors. TGL RVP from Foxlink and Volteer from Sunny. ov8856 sensor is identical for the two modules but VCM and EEPROM are different. Originally, Volteer ACPI was set to align with Sunny module, GT9679. But it turned out GT9679 is compatible with Foxlink's DW9768. So Volteer camera ACPI configuration doesn't need to keep GT9679. BUG=b:158188369 BRANCH=none TEST=Build and boot volteer proto 2 board. Start a camera app and check user-facing camera functionalities. Signed-off-by: Daniel Kang <daniel.h.kang@intel.com> Change-Id: I792608f86a59b16545dfa4edf6508de7a444bb26 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42048 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Daniel H Kang <daniel.h.kang@intel.corp-partner.google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-06-22mb/google/dedede: Re-configure the USB ACPI objectsKarthikeyan Ramasubramanian
In waddledee and waddledoo, discrete & integrated BT signals are routed to different USB ports. In all the other variant boards, discrete & integrated BT signals are routed to the same USB port (port 8 - index 7). Re-configure the USB devices accordingly. Also device configuration in override tree are applied only if there is a matching device in base devicetree. So configure all the USB devices in base devicetree and turn them off. BUG=b:154064148 TEST=Ensure that the SSDT contains the ACPI objects for enabled USB devices. Change-Id: I1b8bf7f4db1d2661f310bf4874428a6d1de222c6 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42554 Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-22mb/google/dedede: Add VCM and NVM entry for OV8856 sensorPandya, Varshit B
Add DW9768 VCM device and add its entry in the OV8856's _DSD to allow the V4L2 driver to use the VCM functionality. Also add ACPI entries for AT24 NVM device, this will enumerated as a generic NVM device and not part of the V4L2 framework. BUG=b:155285666 BRANCH=None TEST=Build and able to see DW9768 and AT24 getting listed I2C3 lanes and able to capture image using world facing camera. Change-Id: I19e4a4107c5bc9d96f718d654df50e2705b98c03 Signed-off-by: Pandya, Varshit B <varshit.b.pandya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41173 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-06-22cpu/x86/smm: Use already defined APM_CNT messagesKyösti Mälkki
Change-Id: Ie9635e10dffe2f5fbef7cfbd556c3152dee58ccc Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42616 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-22mb/google/hatch: Stop AP power-off on Puff & variants cr50 updatesEdward O'Callaghan
Fix Puff and its variants to not shutdown the AP before the cr50 reboot. This is the same approach that Sarien do to remain on during a cr50 cycle. BUG=b:154071064 BRANCH=none TEST=none Change-Id: I5f92b4f769654b67c10c91e4cc7b2bce785e302f Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42497 Reviewed-by: Sam McNally <sammc@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-22mb/google/hatch: Make puff and variants share common dptf.aslEdward O'Callaghan
Here we consolidate some of the dptf.asl duplication between Puff and it's variants. Customizations can be done later either as a direct copy or preferably via introducing a #define. BUG=b:154071868 BRANCH=none TEST=none Change-Id: I35fa1e152adb5f04fb6ef1bd2448376cf9f37980 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42553 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sam McNally <sammc@google.com>
2020-06-22mb/google/hatch: Make puff and variants share common ec.hEdward O'Callaghan
Here we consolidate some of the ec.h duplication between Puff and it's variants. BUG=b:154071868 BRANCH=none TEST=none Change-Id: I13dfe09da5c7a19677b156063bb51a58bc059b93 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42552 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sam McNally <sammc@google.com>
2020-06-20mb/google/jecht: Correct hda_verb mic pin configsMatt DeVillier
Commit 0148fcb4 [Combine Broadwell Chromeboxes using variant board scheme] incorrectly flipped the mic pin configs for verb NIDs 0x18 and 0x19, so set them back to the correct values, which match the original Chromium sources (where the NID identifiers in the pin config comments were reversed, which was the source of the confusion originally. Test: build/boot guado variant, verify mic attached to 3.5mm jack functional Change-Id: I65b813c8f801303682762ce5a7446e07af117b9f Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42518 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-20mb/google/beltino/**/hda_verb.c: Correct mic pin configsMatt DeVillier
Commit 0558d0c [mb/google/beltino/**/hda_verb.c: Correct pin configs] incorrectly flipped the mic pin configs for verb NIDs 0x18 and 0x19, so set them back to the correct values, which match the original Chromium sources (where the NID identifiers in the pin config comments were reversed, which was the source of the confusion originally. Test: build/boot panther and zako variants, verify mic attached to 3.5mm jack functional Change-Id: I172a0bb299049d113a0272ee9c790b25b6242cad Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42499 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-20mb/google/zork: rename fch_apic_routing struct to fch_irq_routingFelix Held
fch_apic_routing is used as name of an array that init_tables() populates with the APIC IRQ routing information. Also the fch_pirq array where fch_apic_routing was used as struct name contains the IRQ mapping for both PIC and APIC mode, so rename it to fch_irq_routing. Change-Id: Iba7a2416c6e07cde1b8618bdabf31b00e3ca4dd1 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42569 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-06-20mb/google/zork: remove redundant IRQ routing configurationFelix Held
The PIC and APIC IRQ routing tables are pre-populated with PIRQ_NC in init_tables(), so the fch_pirq table entries where both IRQ numbers are set to fch_pirq are redundant and can be removed. Change-Id: I0d9b4f25e12a66cf86d1ad541955c3d2fe336c5a Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42568 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-06-19soc/amd: move acpi_wake_source.asl to common directoryFelix Held
Files are both identical and common for both SoCs. Change-Id: I54b78108d342a0fd03bf70ffe6a09695c5678eb4 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42545 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-19mb/google/zork: Disable UART 1, 2 and 3Raul E Rangel
We don't use these on zork, so lets save the power. BUG=b:153001807 TEST=Boot OS and make sure UART 1, 2 and 3 are not probed and remain powered off. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I2fadeba779b66ec2fb13951b9487118ef0737a94 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42328 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-06-19tigerlake: add unique acpi device ids for dptfSumeet R Pawnikar
Add unique new acpi device ids for dptf for Tiger Lake soc based platforms and update volteer speficic dsdt.asl file accordingly. The Linux kernel driver expects these new acpi device ids for dptf functionalities. BUG=None BRANCH=None TEST=Build and boot on volteer system Change-Id: I7dbb812c0fc0f5084c98cf2752ce7ddce8e4d50e Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42040 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-06-19Kconfig: Escape variable to accommodate new Kconfig versionsPatrick Georgi
Kconfig 4.17 started using the $(..) syntax for environment variable expansion while we want to keep expansion to the build system. Older Kconfig versions (like ours) simply drop the escapes, not changing the behavior. While we could let Kconfig expand some of the variables, that only splits the handling in two places, making debugging harder and potentially messing with reproducible builds (e.g. when paths end up in configs), so escape them all. Change-Id: Ibc4087fdd76089352bd8dd0edb1351ec79ea4faa Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42481 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
2020-06-19mb/*/*/Kconfig: guard board name in quotesPatrick Georgi
New kconfig dislikes unquoted slashes. Change-Id: Ief242de081071021b9c904a24535d025f6674270 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42480 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-18mb/google/dedede: Add support for 16 MiB flash map descriptorKarthikeyan Ramasubramanian
Upcoming variant boards will use 16 MiB SPI ROM. So add support for 16 MiB flash map descriptor. BUG=b:155107866,b:152981693 TEST=Build different variant boards. Ensure that waddledoo which is using 32 MiB SPI ROM boots. Cq-Depend: chrome-internal:3107306 Change-Id: I8a6868da3280a662ff3a30623804ff135e6cbfbc Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42322 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-18mb/google: remove cannonlake dptf.asl include file from dsdt filesSumeet R Pawnikar
Remove cannonlake dptf.asl include file from all the dsdt files as per soc/intel/common/acpi code changes for dptf. BUG=None BRANCH=None TEST=Build and boot on the system Change-Id: I961a3ecb27e7bb7bb0b98c8630900bada0531639 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42041 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-06-18mb/google/hatch: fix variants' selection of CHROMEOS_DSM_CALIBMatt DeVillier
CHROMEOS_DSM_CALIB requires/selects CHROMEOS, so only select if CHROMEOS already selected, otherwise building for non-ChromeOS targets fails. Test: build HELIOS for non-ChromeOS target (Tianocore payload) Change-Id: Ic0fd3b0a0efbc5a1f6896eb379569a55cb0f67f8 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42414 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-18mb/google/volteer/variants/terrador: Disable EC SW syncDavid Wu
It is the reference board of TGL-Y platform, we want to disable EC SW sync for Proto stage, it would be re-enabled before EVT stage. BUG=b:156435028 TEST=FW_NAME=terrador emerge-volteer coreboot chromeos-bootimage Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Ie7999e24e9c173d4870b35ce1728f3dcc8dcac29 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42090 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-17mb/google/volteer: remove unused GPP_H23Nick Vaccaro
BUG=b:157567939 TEST="emerge-volteer coreboot chromeos-bootimage", flash and boot volteer to kernel. Change-Id: I3046cf3a359e833a5d204f78ab84312e8665061f Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42411 Reviewed-by: Jes Klinke <jbk@google.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-17mb/volteer: Set IomTypeCPortPadCfg default to 0x09000000Brandon Breitenstein
Temporary workaround for S0ix issues related to FSP's handling of 0 value. When IomTypeCPortPadCfg is 0 FSP completely skips any flow related to this value which seems to be causing issues with s0ix. This is still being debugged and a final solution will be made when available BUG=b:159151238 TEST=flash image with workaround to volteer and verify that s0ix cycles correctly. Change-Id: Id79dd1c49958389cdb666b3760abd821bc1973a8 Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42268 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Shreesh Chhabbi <shreesh.chhabbi@intel.corp-partner.google.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 15:25:52 +0000