| Age | Commit message (Collapse) | Author |
|---|
|
Leverage the common sku id space helper encoders.
volteer uses the non-legacy SKU ID space.
BUG=b:149348474
BRANCH=none
TEST=only tested on hatch
Change-Id: Ic66908afb7abb34527b4177cfd07f03ad718317c
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39037
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Leverage in Puff to avoid diskswap variants. Later this could become
part of the baseboard definition and hatch diskswap variants migrated
over to use it as well.
BUG=b:149171631
BRANCH=none
TEST=Swap between x4 NVMe drives and 2x2 Teton Glacier hybrid drives and
run lsblk, lspci, and nvme tools to confirm dynamic PCIe configuration
on Puff.
Change-Id: Ie87f0823f28457db397d495d9f1629d85cfd5215
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39041
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Leverage the common sku id space helper encoders.
BUG=b:149348474
BRANCH=none
TEST=tested on hatch
Change-Id: I96e10010fd375b127f1e10387d6f7a839bc35fdd
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39019
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Configure GPP_E0 as output for view angle management
Change-Id: Iad640eed855b47e365da55fa994c6a3c4c38caf9
Signed-off-by: Rajat Jain <rajatja@google.com>.
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39144
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Configure below ESPI IO decode ranges:
1. 0x200-020F: EC host command range.
2. 0x800-0x8FF: EC host command args and params.
3. 0x900-0x9ff: EC memory map range.
Change-Id: I1e450d6e45242180de715746b9852634de2669c6
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39121
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
1. Enable Internal Gfx device.
2. Configure DDI0 for EDP.
3. Configure HPD and DDC suppport for DDI1/DDI2.
4. Configure HPD GPIOs.
TEST=Verify display on EDP panel in OS
Change-Id: Ia53428af549ba01ab539f9474a6e5e79b72dff5c
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39132
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I8c721c7ccba4f87d4acb9dae74213a46151fe2ed
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39118
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The indirection of names is exceedingly confusing for ultimately the single
interrupt trace of EC_PCH_WAKE_ODL between the EC gpio#74 to GPD2/LAN_WAKE# on
the PCH side.
This helps folks chase this indirection down through the code.
BUG=b:147026979
BRANCH=none
TEST=builds
Change-Id: I35d746a202dae06d2f6f1edfaa3889864b09f50d
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38491
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
WWAN wake event is routed to GPP_D0 GPIO and Pen Detect wake event is
routed to GPP_C12 GPIO. Update the GPE configuration accordingly.
BUG=None
TEST=Build the mainboard.
Change-Id: Id36d2c8265a0b7ea241565f6bb723df6b37446fa
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39112
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Change-Id: I7650786ea50465a4c2d11de948fdb81f4e509772
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39100
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ie47265527b2b81748f4f3ad744d35cb81af17b80
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39122
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
Change-Id: I663678a4c572fe80298f7388870d5cd403122b98
Signed-off-by: Jeff Chase <jnchase@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39109
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
Change-Id: I77c33c19b56dc9bd54e7555ce59f6a07bde3dbb6
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39081
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This change creates gfx directory under drivers/ so that all drivers
handling gfx devices can be located in the same place. In follow-up
CLs, we will be adding another driver that handles gfx devices.
This change also updates the names used within the driver from
*generic_gfx* to *gfx_generic*. In addition to that, mainboard
drallion using this driver is updated to match the correct path and
Kconfig name.
TEST=Verified that drallion still builds.
Change-Id: I377743e0f6d770eed143c7b6041dab2a101e6252
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39047
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Mathew King <mathewk@chromium.org>
|
|
Remove MAC address pass through because when MAC address pass through setting
change to "Use dock built-in MAC address", the MAC address always keeps the VPD
value.
BUG=b:149813043
TEST=tested on sarien and the result as below.
(Option) (Result)
- Use pre-assigned MAC address : Pass
- Use Chromebook built-in address : Pass
- Use dock built-in MAC address : Pass
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: Ia85ef6ed0c4db82301375edd0968cf7dd2f62dc1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39042
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
Follow latest HW schematics to set GPP_G4 and GPP_G6 to NC pin.
This can save 1mW power comsumption.
BUG=b:149289256
TEST=NA
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Ib3bf8b8f922a350d2b73ef5c9e9cf1b6e2c0f657
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38999
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com>
Reviewed-by: Mathew King <mathewk@chromium.org>
|
|
Commit 6ae8b50 [chromeec: Depend on events_copy_b to identify wake source]
partially broke resume from suspend on Auron and Slippy variants when
multiple events exist in the EC event queue. In the case of the device
suspending manually and then subsequently having the lid closed, the device
will be stuck in a resume/suspend/resume loop until the device is forcibly
powered down.
Mitigate this by clearing any pending EC events on S3 wakeup.
Test: build/boot several Auron/Slippy variants, test suspend/resume functional
with both single and multiple events in EC event queue.
Change-Id: I7ec9ec575d41c5b7522c4e13fc32b0b7c77d20d9
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38984
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Add initial support for waddledoo board.
BUG=None
TEST=Build the mainboard and variant board.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I8ab4d52c97b1cfb5549d2fce4b931748a1b1ff1a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38857
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Turn on EMMC device and enable the HS400 mode. Configure the GPIOs
associated with EMMC.
BUG=None
TEST=Build the mainboard.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: Ic27c68f4622eec5b2930dc38186b82d895d3f67c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38856
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
|
|
Add USB port configuration in devicetree. Configure USB Over-Current (OC)
GPIOs.
BUG=None
TEST=Build the mainboard.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I19f7563013c7d702d52b7f34a207a34abe308621
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38855
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
|
|
Remove MAC address pass through because when MAC address pass through setting
change to "Use dock built-in MAC address", the MAC address always keeps the VPD
value.
BUG=b:147994020
TEST=tested on drallion and the result as below.
(Option) (Result)
- Use pre-assigned MAC address : Pass
- Use Chromebook built-in address : Pass
- Use dock built-in MAC address : Pass
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: I1f58e98187feb4e428ca75f7e82c464567528526
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39020
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Mathew King <mathewk@chromium.org>
|
|
Some Volteer variants might not use SPD files. Allow SPD_SOURCES in
spd/Makefile.inc to be empty.
BUG=None
BRANCH=None
TEST=Build coreboot and see that it builds without error
Signed-off-by: Paul Fagerburg <pfagerburg@google.com>
Change-Id: I5a8231b999e16503867d3c8df571b11fa0c1f6a6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38902
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Also replace 'BIOS' by coreboot when the image is 'coreboot.rom'.
Change-Id: I8303b7baa9671f19a036a59775026ffd63c85273
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38932
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change based on google/auron that is similar to peppy.
This will be helpful for the next follow-up commit that will
add ACPI for the ambient light sensor.
Change-Id: Ib2a8356d261d211d5ed5c0b035c94ec56b9c25b3
Signed-off-by: Nicolò Veronese <nicveronese@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37992
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Follow thermal table for fine tuning.
1. Update PSV values for sensors.
2. Change PL1 min value from 4W to 5W.
3. Change PL1 max value from 15W to 12W.
4. Change PL2 min value from 15W to 12W.
BUG=b:148627484
TEST=Built and tested on drallion
Change-Id: I957d41e3c14f6dbcec8c3555382895698beabe40
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38658
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Proper VR settings will be selected by CPU SKU and cpu_pl2_4_cfg.
BUG=b:148912093
BRANCH=None
TEST=build coreboot and checked IA_TDC from TAT tool.
Change-Id: Ie471dee0c70e1831a822860c0a44455772a2b8be
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38811
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Mathew King <mathewk@chromium.org>
|
|
add SKU ID 3 and 4 for dood DVT
1: Dood WiFi + LTE (evt)
2: Dood WiFi (evt)
3: Dood WiFi + LTE + dual camera (dvt)
4: Dood WiFi + dual camera (dvt)
BUG=b:148988979
TEST=build firmware and verify on the DUT of sku 3 and 4
check LTE module is enabled or not
Change-Id: If86efe2a2f7b2e165ad44220b6dd59e9080b5892
Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38730
Reviewed-by: Marco Chen <marcochen@google.com>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
USB3 OC pin is configured for the wrong pin. Follow HW circuit
(schematics) to set it correctly.
BUG=b:147869924
TEST=USB function works well and OC function is corresponds to the
right port.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I61234a2054ab52fa508482d3dd0f94b13f96a5c9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38885
Reviewed-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Puff uses the smbus to access the SPD of memory DIMMs.
It will short the SPD reading time if enabling SPD_READ_BY_WORD.
BUG=b:149360051
BRANCH=None
TEST=build puff and boot up OS
ran cbmem -t | grep FspMemoryInit
Without this patch:
950:calling FspMemoryInit 643,199 (257,588)
With this patch:
950:calling FspMemoryInit 477,714 (154,612)
Signed-off-by: Jamie Chen <jamie.chen@intel.com>
Change-Id: I161e8eb386ab604b16746f0deeecc3d6c9063c3a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38848
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
Fine tune the video timing of panel-BOE_TV101WUM_N53 to avoid noise. The
parameters are based on BOE NV101WUM-N53 preliminary product spec.
BRANCH=kukui
BUG=b:147378025
TEST=bootup pass
Change-Id: Ia9e2cc90f233e87d712c2dc6f4441ca2e5423162
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38401
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Declare the following panel for Kakadu:
- BOE_TV105WUM_NW0
BUG=b:148997748
TEST=build Kakadu image passed
BRANCH=kukui
Signed-off-by: Casper Chang <casper_chang@bitand.corp-partner.google.com>
Change-Id: I394b8cafa8be40e5fd6bf8ceb81b520df73718a4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38822
Reviewed-by: Peichao Li <peichao.wang@bitland.corp-partner.google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Bipship is a sustaining project of Blooguard.
SAR value follow Blooguard.
BUG=b:149414960
BRANCH=octopus
TEST=build and verify load correct SAR value by sku-id
Change-Id: Ic45ed10fc147401d4278f1811a86cd2b2e4c63ac
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38859
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Enable I2C ports that are used. Add GPIO configuration for the I2C
ports. Enable config items that are required for I2C HID & Generic devices.
BUG=None
TEST=Build the mainboard.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I12e974530fb5f61fae5d12cadbb3f928e617d73a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38847
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
|
|
Enable UART Port 2 as console UART and configure the concerned GPIOs.
BUG=None
TEST=Build the mainboard.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I30a64a3c96226ce3244d55919b6d65fbf0a096e2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38776
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Turn on the H1 device in the devicetree. Configure the concerned GPIOs
and enable the required config items.
BUG=None
TEST=Build the mainboard.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I37972635454cd0d35608623e7be4110012ace658
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38772
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit a017e5fb3dda5ea6bbc94ee15b2e981eeaa2d918.
Reason for revert: The extra reset in the FSP after the flex ratio is changed causes recovery reasons to be lost. There are some vboot changes that recently landed that could help with this issue, but for now, we are working on a new AU image for Kohaku and this is causing our automated testing to fail.
Change-Id: Ic38b390842e2a533033587b3247b7c8d982b1dff
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38324
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Some of the common memory code that was being performed in
mainboard has moved into the soc to reduce redundant code.
This change adapts volteer to use Tiger Lake's new common code.
BUG=b:145642089, b:145238504, b:145564831
BRANCH=none
TEST="emerge-volteer coreboot chromeos-bootimage", flash and boot
volteer, boot to kernel, "cat /proc/meminfo" and verify it reports
"MemTotal: 8038196 kB".
Change-Id: I32c9b8a040728d44565806eece6cf60b6b6073b6
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38715
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change tcc offset from 0 to 15 degree celsius for lick.
BUG=b:147198431
BRANCH=octopus
TEST=Build, and verify test result by thermal team.
Signed-off-by: Hash.Hung <hash1.hung@lcfc.corp-partner.google.com>
Change-Id: Ife6b02321145837e05c82f979998466b83317f86
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38506
Reviewed-by: Marco Chen <marcochen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add initial configuration for GSPI, I2C and UART ports and leave them in
disabled state.
BUG=None
TEST=Build the mainboard.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I1cd7659337e6330a8ece34df247e399a085d21d0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38775
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
|
|
BUG=None
TEST=Build the mainboard.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I12a63e5776619e5a7684cf1edad78b0fd6fac12c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38739
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Configure the GPIO groups to be routed to the GPE0 block.
BUG=None
TEST=Build the mainboard.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: Ife4d0179bd9fe1785e971686478f7c76de805e87
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38771
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add compute and PCH Global device IDs with the concerned devices turned
off.
BUG=None
TEST=Build the mainboard.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I6f226abd52d4a27535de6711e93355b5f84a1941
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38738
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Created a new Google baseboard named volteer from scratch.
BUG=b:142961277
BRANCH=master
TEST="emerge-volteer coreboot" compiles successfully.
Change-Id: I03a13f3df4e819ab9cf63ad69867c807d2a1b651
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38620
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add new SPD files for drallion:
1. Hynix H5AN8G6NDJR-XNC
2. Samung K4AAG165WA-BCWE
3. Samung K4A8G165WC-BCWE
BUG=b:148642500
TEST=Compile successfully and check SPD info in cbmem log.
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Change-Id: I0e9b444f6f1e0c7e1da197fbd2e70e686568ab47
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38731
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Mathew King <mathewk@chromium.org>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change GPP_C10 from pltrst to deep to meet the warmboot power sequence.
BUG=b:146935222
TEST=measure WWAN power sequence is meet spec
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Ia1513ed38fbc1c99a10a5fa531a78cc92a3ebfc2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38742
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mathew King <mathewk@chromium.org>
|
|
BUG=b:148410914
TEST=Build the mainboard.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I7dffa5c021787dca75786ead42164bd29ba56828
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38724
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Since most of Bloog series SKUs need to disable DRRS support.
If Bloog and Unprovisioned SKUs then return vbt.bin to enable DRRS support,
return vbt_blooguard.bin for other SKUs to disable DRRS support.
Bipship follow blooguard to disable DRRS support.
BUG=b:148892903, b:147021309
BRANCH=octopus
TEST=emerge-octopus coreboot chromeos-bootimage
check i915_drrs_status shows DRRS supported NO when SKU ID is bipship.
Change-Id: I61f12d4ddea17a05255751fde2a5ce822dd2e782
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38716
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marco Chen <marcochen@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Wait for HPD DP unless HDMI is plugged.
Some Type-C monitors do not immediately assert HPD. If we continue
to boot without HPD asserted, Depthcharge fails to show pictures
on a monitor even if HPD is asserted later.
Similar to that of b:72387533 however our DP&HDMI are beind a MST.
See commit d182b63347c744c on how this was done for mainboard/fizz.
BUG=b:147992492
BRANCH=none
TEST=Verify firmware screen is displayed even when a type-c monitor
does not immediately assert HPD. Verify if HDMI monitor is connected,
AP does not wait (and firmware screen is displayed on HDMI monitor).
Change-Id: I19d40056e58f1737f87fd07d62b07a723a63d610
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38475
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
|
|
Enable acoustic noise mitigation, the slow slew rates are fast time divided by 8
and disable Fast PKG C State Ramp (IA, GT, SA).
BRANCH=hatch
BUG=b:143501884
TEST=build and verify that noise reduce.
Change-Id: I65f47288a7b1da98296fdba87ab5ca0c3a567aaf
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38212
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Follow HW change to use GPP_D15 as TS_RST. And change GPP_B21 from pltrst
to deep in order to met power off timing.
BUG=b:143733039
TEST=Check touch screen is functional in s0 and resume from s0ix
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Ieec7eb78a05e653f271e348ed11f7e31c08bd5dc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38665
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
1. Enable PCIe port for dGPU
2. Change WLAN PCIe port from port 14 to port 7
BUG=b:147249494
TEST=Ensure dGPU and WLAN shows up with lspci.
Change-Id: Iea3292be7d8029c35847118228bbb773418632a1
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38399
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:139481313
Change-Id: I1a0911b7967e5823fdce98195420728bd38c80f6
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38680
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Set HeciEnabled = 1 on puff device tree to turn on
Intel ME communication interface.
BUG=b:143232330
BRANCH=None
TEST=Build puff and boot up OS.
ran lspci and confirmed there is a HECI device.
00:16.0 Communication controller: Intel Corporation Device 02e0
Change-Id: I2debb885022ae31e395869d014a91824b5dd980c
Signed-off-by: Jamie Chen <jamie.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38676
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
Asserting reset in RO instead of in RW has no impact on security or
performance, but it does limit improvements to this process later.
This fix removes reset line control from RO and makes these variants
consistent with other hatch variants.
This fix reinforces the concept from commit fcd8c9e99e
(hatch: Fix FPMCU pwr/rst gpio handling).
BUG=b:148457345
TEST=None
Change-Id: I12dc0c3bead7672e2d3207771212efb0d246973a
Signed-off-by: Craig Hesling <hesling@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38623
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Configure GPP_H22 as output pin for BOMACO mode enabled.
BOMACO stands for "Bus Off Memory Alive Core Off".
BUG=b:146081272
TEST=emerge-mushu coreboot
Change-Id: Ic35e55771d76b7254bcb457fcb38f37433b9ad67
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38210
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove EC_HOST_EVENT_MKBP from kohaku's EC_SCI_EVENTS mask, so that
MKBP events don't generate an SCI. The EC is also being changed to use
host events to wake up the system, and use the EC_INT_L line for MKBP
IRQ signalling. Otherwise, there would be two IRQs generated for MKBP
events.
BUG=b:144122000
BRANCH=firmware-hatch-12672.B
TEST=System shows ACPI interrupt as the wakeup IRQ, and the
MKBP host event is properly processed as well.
Change-Id: I9ff964e38e66ccb953a1adad5a936a9da6e4f3a1
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38654
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch overrides CPU flex ratio on hatch in order to get
better boot time numbers in vboot_reference.
BUG=b:142264107
TEST=Able to save ~100ms of platform boot time while running with
lower cpu flex ratio (i.e. freq ~1500MHz)
Without this CL
1100:finished vboot kernel verification 802,443 (148,108)
With this CL
1100:finished vboot kernel verification 685,382 (46,496)
Change-Id: Idd1d1c0c04b1f742f17227a1335f27a956ee940d
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36865
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Turns out when going into S0ix we want the kernel to toggle de-assert to 0 for
the ISOLATE# pin on the NIC for S0ix not to be woken by PCIe traffic on PCH.
Upon resume the ISOLATE# pin on the NIC is then re-asserted for it to become
lively again.
BUG=b:147026979
BRANCH=none
TEST=Boot puff and do 1500 cycles of S0ix.
Change-Id: I3470e1edd93b461b66fc6444541a64339bcdcce3
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38523
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add helper functions to get board's sku_id and fw_config. Enable
EC_GOOGLE_CHROMEEC_BOARDID to get board_id. Add board's SKU ID and
OEM name into SMBIOS table.
BUG=b:144768001
TEST=Build Test.
Change-Id: Id1729e245accf5acc29307a22721362fb1ce0878
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38551
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:148221635
TEST=build;install;lspci
Change-Id: I1732f7fe64ace41a721a2d6a964988efc97b2579
Signed-off-by: Jeff Chase <jnchase@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38550
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch creates a new commonlib/bsd subdirectory with a similar
purpose to the existing commonlib, with the difference that all files
under this subdirectory shall be licensed under the BSD-3-Clause license
(or compatible permissive license). The goal is to allow more code to be
shared with libpayload in the future.
Initially, I'm going to move a few files there that have already been
BSD-licensed in the existing commonlib. I am also exracting most
contents of the often-needed <commonlib/helpers.h> as long as they have
either been written by me (and are hereby relicensed) or have an
existing equivalent in BSD-licensed libpayload code. I am also
relicensing <commonlib/compression.h> (written by me) and
<commonlib/compiler.h> (same stuff exists in libpayload).
Finally, I am extracting the cb_err error code definitions from
<types.h> into a new BSD-licensed header so that future commonlib/bsd
code can build upon a common set of error values. I am making the
assumption here that the enum constants and the half-sentence fragments
of documentation next to them by themselves do not meet the threshold of
copyrightability.
Change-Id: I316cea70930f131e8e93d4218542ddb5ae4b63a2
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38420
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
The GLK bootblock seems(?) to be hard limited to 32KB and some Octopus
variants are so close to that that they only have 0.5KB left. This is
blocking development of new core features, so let's disable the
bootblock console to gain a couple of KB back (like we already did on
RK3288).
There are probably other opporunities for code size reduction here (e.g.
it seems that almost half(!) of that whole bootblock size is taken up by
devicetree.cb structures), but I'm not familiar enough with the platform
to dig into them.
Change-Id: I05b4ecf5abef7307e3d0a81db04a745ff3da0c42
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38521
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:148252157
BRANCH=none
TEST=Put a puff in s0ix, send a WoL magic packet.
Change-Id: I4a08a2f5505d00909c9301315fcf72f687141f91
Signed-off-by: Sam McNally <sammc@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38553
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
Perform EC initialization in bootblock and ramstages. Add associated ACPI
configuration.
BUG=b:144768001
TEST=Build Test.
Change-Id: Ib31ae190818c8870bdd46ea6c3d9ca70dc0485cc
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38282
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Enable building for Chrome OS and add associated ACPI configuration.
BUG=b:144768001
TEST=Build Test
Change-Id: Ibb94849a903e4d4364d817de8988a430cd717e4c
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38281
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add stub implementation of smihandler.
BUG=b:144768001
TEST=Build test.
Change-Id: I7ab25888812bfb4578915e342b14355ccd15f5cc
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38280
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Enable ACPI configuration and add DSDT ACPI table.
BUG=b:144768001
TEST=Build Test
Change-Id: I0aa889cd52bff3e1e9ff7b7b93ec1000045bcfd2
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38279
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add stubbed out GPIO configuration and perform GPIO initialization
during bootblock and ramstage.
BUG=b:144768001
TEST=Build Test
Change-Id: I1397b6a433e5046650f64f7eb9a84c51eb0c7441
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38278
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove fixed IccMax values for U22 CPU.
IccMax will be selected by CPU SKU.
BUG=b:148110226
BRANCH=None
TEST=build coreboot and fsp with enabled fw_debug.
Flashed to device and checked IccMax[1].
Change-Id: Ifcd31ad5b608ce599d4294a6522fdda022f8a177
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38503
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
1. Add a TEMP_SENSOR3
2. Update DFPS (fan performance state) table with values received
from thermal team
3. Update PL1 override to 15W
4. Update PL2 override to 51W
BRANCH=hatch
BUG=b:147792204
TEST=build and verify by thermal team
Change-Id: I21c17c09a097c963f4dd1b7d5f8212c83a639dc3
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38025
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This CL allows MKBP events from the EC to wake the system from suspend
states.
BUG=b:144122000
BRANCH=firmware-hatch-12672.B
TEST=Verify that MKBP events generated from EC will wake the system
from S0ix.
Change-Id: I8a0d2c7ed89fa1ea937a08c3082cc5d3e782efff
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38496
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
According to VRTT report, add ac/dc loadline configuations in puff device
tree.
BUG=b:147206535
BRANCH=None
TEST=build coreboot and fsp with enabled fw_debug.
Flashed to puff and checked the log.
All ac/dc loadline configs were set correctly.
Change-Id: Ia806de23a1fefcaac3ce9a462a8a04eee5eabcae
Signed-off-by: Jamie Chen <jamie.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38479
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
Jinlon will use EC to control fan, so remove DPTF fan control.
BUG=b:141259174
TEST=emerge-hatch coreboot chromeos-bootimage
Change-Id: I8ada4fe72eee260fecf45d00510da8b91e3f10a4
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38492
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Fix devicetree to advertise the correct USB names and types
in the generated ASL.
BUG=b:146437991
BRANCH=none
TEST=booted and inspected the reported generated ASL.
Change-Id: I133b4db444f9a5f0a36d8e976ae490f24cf307d8
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38473
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Daniel Kurtz <djkurtz@google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Change stapm percentage to 80 and time to 2000 seconds make
DUT meets Lenovo spec and pass CTS respectively.
BUG=b:147333429
TEST=build firmware and install it to DUT and run CTS relevant
test, check temperature whether meets spec.
Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com>
Change-Id: I6a2f059fbd5c89f897cfb46d1f7a82b0923edb17
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38443
Reviewed-by: Daniel Kurtz <djkurtz@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
- Disable Windows driver DPST function
- Set POST resolution to 1800x1200
- Set POST brightness to 225 (0-255 scale)
Test: Boot Windows on EVE, verify display backlight control
functional and no lock ups from switching in/out of tablet mode.
Change-Id: Ida64a44df2449f1ff0dc5c8d0ec7b40a183566a7
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38396
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Base on SATA SI report to fine tune the strength for port 1.
BRANCH=none
BUG=b:147351936
TEST=build and test SATA port works fine.
Change-Id: Ib82b7e5df32b4ce794682781f33c44dfeb6e68bf
Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38458
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
Base on USB SI report to fine tune the strength and correct
some OC pin settings.
BRANCH=none
BUG=b:147206010
TEST=build and test all usb ports function work fine.
Change-Id: Idbee5cdddf3a83f97109214a95e0f9875b3b3f8f
Signed-off-by: Jamie Chen <jamie.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38425
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
It was never filled it, it probably never will be filled in, so stop
the pretense.
Change-Id: I7632b763b8518304d36a818ce262cc127f95b9f0
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38407
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Provide Puff with it's own copy of ec.h copied from the
baseboard/includes however with the battery, lid and ps2
defines stripped.
This is to ensure the correct ASL is generated so that we don't
advertise PS2 keyboard support and battery/lid interrupts which
don't exist.
V.2: drop EC_ENABLE_ALS_DEVICE as well.
V.3: set MAINBOARD_EC_SMI_EVENTS to 0 and drop
EC_HOST_EVENT_LID_CLOSED smi event.
V.4: drop EC_HOST_EVENT_MODE_CHANGE &&
provide wake pin for EC for _PRW WoL method
V.5: drop EC_HOST_EVENT_KEY_PRESSED
BUG=b:147850335
BRANCH=none
TEST=builds
Change-Id: If13bd124c7229ced996efb841980604d13be09af
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38454
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Helios does not have MAX98357A speaker amplifier, so remove the devicetree
entry.
BRANCH=firmware-hatch-12672.B
Change-Id: Id02410553f018385d407086b2f9bc3ee1e7a5f40
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Signed-off-by: Sathya Prakash M R <sathya.prakash.m.r@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38398
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
The current BIOS-extracted VBT breaks backlight control
with Tianocore, so replace it with one that does. Settings
were exported using Intel BMP tool and the overlayed onto
a GOP-format (vs BIOS format) VBT file.
Test: boot google/wolf with both SeaBIOS and Tianocore payloads,
verify backlight control functional under both Linux and Windows.
Change-Id: Id6281c8dfb6e0001be8c4d9be1013f2d4bbb5880
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38397
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Add mainboard stubs for Dedede. More functionalities will be added later.
BUG=b:144768001
TEST=Build test.
Change-Id: I7e6cb8adaee7b6bb95e9a96f96466646a78bd0fc
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38277
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For Kukui followers using ANX7625 eDP bridge to access panel.
BUG=b:140132295
TEST=make # board = kukui
Change-Id: I7dc9c68d076fd0ba4e963cde9414d25c17b332cb
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36767
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Drallion will use two sar table for tablet and clam shell mode.
BUG=b:140469407
TEST=Build and check the config has enable
BRANCH=none
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I0367741e795a3b00c490ecb1972d22b9f454134f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38386
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mathew King <mathewk@chromium.org>
|
|
ACPI spec:
"A device object must contain either an _HID object or an _ADR
object, but should not contain both."
Signed-off-by: Jonas Moehle <ad-min@mailbox.org>
Change-Id: I949393558f5af66689c167b2e593a1461f641962
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37935
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Modify DTRT CPU Throttle Effect on TSR0 change to TSR3.
BUG=b:131272830
BRANCH=firmware-hatch-12672.B
TEST=emerge-hatch coreboot chromeos-bootimage
Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com>
Change-Id: I5b4645d7552e795a33c1b86d95c4061da71c65bd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38299
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Due to build rules, dummy acpi_tables source files were added in many
mainboards. With commit 1e83e5c61a3aa98f58f7d8cbf8d1eb9532896cc3
("src/arch/x86: Build mainboard acpi_tables source if present"),
the build system will build mainboard acpi_tables only if present. Remove
the dummy/empty/blank acpi_tables source files.
BUG=None
TEST=Build test with some google mainboards.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I0cef34368e2e5f5e3b946b22658ca10c7caad90a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37854
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Use the existing Karma variant as a base.
BUG=b:144307303
TEST=build
Change-Id: I09a10e99877d18361b31b36bed703b02508ccd05
Signed-off-by: Jeff Chase <jnchase@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36791
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This comment seems to have been copied off some QEMU board. As it would
not apply to any veyron variant, drop it.
Change-Id: I70a2923520f5c59ae31d149920cf4b096e5a11d1
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38064
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Use a consistent spelling for SoC (System-on-a-Chip), and fix a few
minor typos.
Change-Id: I29eacc9e93b2eb686ce945de0173844ef5eae1b9
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38063
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: Ib45c6372df6068ab041a055dad8bacf597717ba2
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38261
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
This patch creates a common instance of northbridge.asl inside intel common
code (soc/intel/common/block/acpi/acpi) and changes cnl,icl & tgl soc code to
refer northbridge.asl from common code block.
TEST=Able to build and boot Hatch and ICL DE system. Dump DSDT.asl to verify
Device(MCHC) presence after booting to OS.
Change-Id: Ib9af844bcbbcce3f4b0ac7aada43d43e4171e08b
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38155
Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The SPI_FLASH_FAST_READ_DUAL_OUTPUT_3B option is no longer
being used in the code. There's a runtime check for supporting
fast read dual output mode of the spi flash. Remove the references
to SPI_FLASH_FAST_READ_DUAL_OUTPUT_3B.
Change-Id: Ie7d9d3f91f29a700f07ab33feaf427a872bbf7df
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38166
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove fixed IccMax values for all domains.
IccMax will be selected by CPU SKU in
fill_vr_domain_config function.
BUG=b:145094963
BRANCH=None
TEST=build coreboot and fsp with enabled fw_debug.
Flashed to device and checked the log.
Signed-off-by: Jamie Chen <jamie.chen@intel.com>
Change-Id: I3f623d143f66c4f6ec63705844c9be7173feeb52
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38237
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward Hill <ecgh@chromium.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
These are meaningless for boards without SIO devices.
Change-Id: I252bba6ff1a2547fd0661ad3076470376e95bdd6
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38032
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
According to vendor Bayhub requirement need tune VIH
make it meets spec
--0x304(6:4) CLK = 3
--0x304(3:0) DAT = 5
BUG=None
TEST=build firmware and measure VIH whether meets spec
Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com>
Change-Id: I4de9e6cfb37e3b76f7afc206cbe3396b8da2d6dd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37458
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
tune eDP delay time to 20 ms ensure satisfy panel spec
BUG=b:147270512
TEST=verify panel sequences by ODM.
Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com>
Change-Id: Ia38fbcb976de55baae480d33c6000c91dc9de6bb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38024
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: chris wang <Chris.Wang@amd.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Let the linker trim unused net driver symbols when unused
in devicetree rather than being overly zealous in the Kconfig.
BUG=b:146592075,146999042,146999043
BRANCH=none
TEST=Boot to kernel.
Ensure we have ip address and corresponding mac
address with ifconfig.
Ensure ethernet controller shows up with lspci.
Change-Id: Ie98d0f9f9b77cb9ee4e52f6c95b68bcbdd94f2cc
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38098
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Daniel Kurtz <djkurtz@google.com>
|
|
Clean up devicetree as nothing special is needed here.
BUG=b:142769041
BRANCH=none
TEST=builds
Change-Id: I0790631233fdcaa6a785d2cb41e79b8f2f469d44
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38099
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Daniel Kurtz <djkurtz@google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
