Age | Commit message (Collapse) | Author |
|
BUG=chrome-os-partner:42881
BRANCH=None
TEST=Using ctrl-d in recovery mode to switch to dev mode works.
Change-Id: Iefbd11d435c4beb570875d4835a085b194d1d1e8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: be172409792a224855b1d31621f23d1969d319b9
Original-Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Original-Change-Id: Icf57dfc4cc258aa2cba341f40d285f8c843aace5
Original-Reviewed-on: https://chromium-review.googlesource.com/286612
Original-Commit-Queue: Hannah Williams <hannah.williams@intel.com>
Original-Tested-by: Hannah Williams <hannah.williams@intel.com>
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/11013
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The GPIO mapping was incorrect for wpsw_cur.
The GPIOs for East community were in two ranges:
0: INT33FF:02 GPIOS [373 - 384] PINS [0 - 11] and
12: INT33FF:02 GPIOS [385 - 396] PINS [15 - 26]
The discontinuity was not accounted for, hence the error.
The original offset was 0x16 whereas it should be 0x13
BUG=chrome-os-partner:42798
BRANCH=None
TEST=Run crossystem and test wpsw_cur entry. If screw is present,
it should be 1 and if not present, it should be 0
Change-Id: I2faea1fe1415c9d4cb23444d03c7c9d47c87e8e5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 30ac96f606a5618e9ef12bac3f50fac433141acd
Original-Change-Id: I166a7c3e15a990b507ae3c13e15ab56bee7fb917
Original-Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/286534
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/11010
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Charger performance states table defines charger current limit for each
p state. Modify charger current control values for SANYO battery used
in Cyan.
BUG=None
BRANCH=None
TEST=System is charging battery, in shell window, issue command
"echo 0 > /sys/class/thermal/cooling_device4/cur_state",
"echo 1 > /sys/class/thermal/cooling_device4/cur_state",
"echo 2 > /sys/class/thermal/cooling_device4/cur_state",
"echo 3 > /sys/class/thermal/cooling_device4/cur_state", or
"echo 4 > /sys/class/thermal/cooling_device4/cur_state", will see EC
console show different charging current value.
Change-Id: Ie9bc78822a73de6bed338bfbcc5e9045653689dc
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3a6162151d1f9c756a13d2afc17f6b9c18608efc
Original-Change-Id: I71e8247d057e4728eedcd5e8a275b64428290d09
Original-Signed-off-by: li feng <li1.feng@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/285605
Original-Reviewed-by: Icarus W Sparry <icarus.w.sparry@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Commit-Queue: Divya Jyothi <divya.jyothi@intel.com>
Original-Tested-by: Divya Jyothi <divya.jyothi@intel.com>
Reviewed-on: http://review.coreboot.org/11004
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch updates the Serial IO modes for UART2 to PCI mode
in devicetree for glados board.
Also we switch over to CONSOLE_SERIAL8250MEM_32 here. 8-bit
legacy UART will stop working after devicetree change.
BRANCH=None
BUG=chrome-os-partner:40857
TEST=Built for glados and tested LPSS logs on glados.
CQ-DEPEND=CL:284881 CL:284882 CL:284883
Change-Id: I433979c852c80848c006ef089b43d75a17e761c5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2c37519e0762801cbb9b547b538b385c84299189
Original-Change-Id: I2faec08d089e407c5ab9838bea980553f49821c4
Original-Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/284826
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Wenkai Du <wenkai.du@intel.com>
Original-Tested-by: Wenkai Du <wenkai.du@intel.com>
Reviewed-on: http://review.coreboot.org/11002
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I0c196ff84484717c59c59d11bb7230b5920e0654
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10997
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Disabling the wwan gpio line
since wwan is not used.
BRANCH=none
BUG=none
TEST=wwan should not connect to network on cyan/strago.
Change-Id: I9d2e5d5b185a4622218e894d3b092afe15e09289
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9a20c602b3bb768baa38b17e21cb4e5b0d9249ef
Original-Change-Id: Ib8d5fd15a172ef898ce675a85c2ea3e5f5c79144
Original-Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/285304
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10992
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
BUG=chrome-os-partner:40526
BRANCH=None
TEST=Verify that system boots when used with coreboot and EC
versions that also have Software Sync enabled.
Change-Id: I6ed562fa51d83ddf16fc74d35db7c0004f57c79e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 090a66c50fac21808c4721a32b1728cc904f1b00
Original-Change-Id: Ia4d87d9a177c579567c03ae113889a277ffecee0
Original-Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/283573
Original-Commit-Queue: Divya Jyothi <divya.jyothi@intel.com>
Original-Tested-by: Divya Jyothi <divya.jyothi@intel.com>
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/10985
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add initial files for the cyan board.
Matches chromium tree at 927026db
This board uses the Braswell FSP 1.1 image and does not build
without the FspUpdVpd.h file.
BRANCH=none
BUG=None
Test=Build and run on cyan
Change-Id: I935839be033c25e197e78fbee306104b4162a99a
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/10182
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
So odmdata has the correct UART port of 0
BUG=chrome-os-partner:40741
BRANCH=None
TEST=build Foster ok; and check scratch20 register
Change-Id: I2c203317e6305214b74430780f2fe7b15652873a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0a0a99ac9c7db267129e4bc3478f9bb1ece08507
Original-Change-Id: I7be10d5deb5118f1cf3e339afca94893610437f2
Original-Signed-off-by: Yen Lin <yelin@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/280291
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/10955
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
So odmdata has the correct UART port of 0.
BUG=chrome-os-partner:40741
BRANCH=None
TEST=build Smaug ok; and check scratch20 register
Change-Id: I59154daa5b5627d3b594ff9505e4f02de0d4d7aa
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 814cd164ab9ed9bf2e072f3728e89ea8d7cf0343
Original-Change-Id: I2252b728775cf2550d666ead0085c0ab3b72e40b
Original-Signed-off-by: Yen Lin <yelin@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/277024
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/10954
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add sdram_configs.c to both romstage and ramstage.
BUG=chrome-os-partner:40741
BRANCH=None
TEST=Build ok on Foster
Signed-off-by: Yen Lin <yelin@nvidi.com>
Change-Id: Ib270c837ebe355c8d16072186c2b27d1c469fd48
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 73bc1abf2821176c21179880774887eec7c858b1
Original-Change-Id: Ia80a57a81e44542ee3d5437866071d50c8c5b8cb
Original-Reviewed-on: https://chromium-review.googlesource.com/280290
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Tested-by: Yen Lin <yelin@nvidia.com>
Original-Commit-Queue: Yen Lin <yelin@nvidia.com>
Reviewed-on: http://review.coreboot.org/10951
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
get_sdram_config() (in sdram_configs.c) will be needed in ramstage.
BUG=chrome-os-partner:40741
BRANCH=None
TEST=Build ok on Smaug
Change-Id: I2920f8687b6a801a91dc5b5b50fc5637057e4321
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4d3092e360b26cbda41549452aeeba9ffc0b92ed
Original-Change-Id: I43a20f3178cbf5b57a3a9ca7391856787aa8cdb8
Original-Signed-off-by: Yen Lin <yelin@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/277373
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/10950
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
CQ-DEPEND=CL:285312
BUG=chrome-os-partner:36613
BRANCH=None
TEST=Compiles successfully and boots to kernel prompt
Change-Id: Ib90333e3331a90b4539d49e1a72833fe3385879f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 042fc1a451081780f8af35af6943130f6412ca5f
Original-Change-Id: I729996c04d8bd6a627421803a59037d7c47a3e98
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/285345
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/10949
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change the drive strength for QSPI Pinmux to DRIVE_STRENGTH_2 as per
recommendations from nVidia hardware engineers.
BUG=chrome-os-partner:41877
BRANCH=None
TEST=Compiles successfully and boots to kernel prompt
Change-Id: I5a7b94acb57bbc21d277a49fd0a6b892638fc0ca
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 58d085e6acbcd0fd355b1c7efc10606312caf8e8
Original-Change-Id: I03dd288d2e335d40c83feaec7efbf10a7d3bf1e6
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/284959
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/10945
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Should fix regression in HDA verb setup on nvidia mcp55 and intel sch
southbridges. The mcp55 code could not find the mainboard's verb table
because the table was not even being compiled in. The sch boards appeared
to have the same issue.
Intel broadwell and fsp_bd82x6x seemed to have not gotten the boilerplate
shrink, so apply it to those too.
Followup-to: Ib3e09644c0ee71aacb067adaa85653d151b52078
(azalia: Shrink boilerplate)
Change-Id: If7aae69f5171db67055ffe220bdff392caaa5d9f
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Reviewed-on: http://review.coreboot.org/10826
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
LDO2 regulator is used as an always-on reference for the droop alert
circuit. Set output voltage to match kernel settings.
CQ-DEPEND=CL:284649
BUG=chrome-os-partner:42305
BRANCH=None
TEST=Compiles successfully and boots to kernel prompt
Change-Id: I5ef4e266d8ec278dadffa846af8dc49b6d18c37e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 611465f6248cba0ddce0083b431cb7ee17bc4b4c
Original-Change-Id: I58cc473452b871392d813387707a0b8288e46561
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/284879
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/10900
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
BUG=chrome-os-partner:42220
BRANCH=veyron
TEST=Used physical recovery button to enter dev mode on mickey
Change-Id: I78332f516b042be9c0cef6d8a59af44b670fc260
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4fcd79a133dc750dffd5d23e0b84a109e7b7cb8d
Original-Change-Id: I8d8dc0c0b98bbd194095d47047c8c5199ce17769
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/283546
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/10844
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Update PMIC settings as per table provided by hardware eng team.
Change-Id: I17a8a1a44fa8c9093e13e8d7e4a2f5b07a3b1f1f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3c49afd0d1a17b73f2192206ff7389e2f7930fec
Original-Change-Id: I027febb6849f1c4d15bf56d8bcd29c431655c7b6
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/283543
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/10843
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Danger has a physical developer mode switch, it was just never
set up. This patch defines it, sets it up in fill_lb_gpios(),
and disables VIRTUAL_DEV_SWITCH.
Note: For now at least, dev mode is a bit wonky on Danger. It's
connected to both a DIP switch and a button. The button is normally
open, pulling dev mode high (defaulting to ON). The switch's "ON"
position will pull the value low, so we invert the value in coreboot
to see the expected behavior. Dev mode is enabled by holding the
button down during boot or by setting switch 2 in the DIP bank to
the ON position.
BUG=none
BRANCH=none
TEST=toggled dev switch on Danger and saw dev screen show up (or
not) as expected
Change-Id: I9369b96b6c9b54553d969b919ed663abdc704dd2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: dce53f1a31919f15f6e46c4a7d1c5ce541c2b318
Original-Change-Id: I737f165d7704e2f73375099367f012b365e3e77d
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/280852
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/10839
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
No need to repeat this in the mainboard code (even if there's only one right
now).
Change-Id: Iaa3508c27f8c38cfa343ab1d8a094ce922dec157
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/10825
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
BUG=None
BRANCH=None
TEST=Compiles successfully for veyron_pinky
Original-Change-Id: I3862e9bf2c32085c921adae4c1dcdf88ff0f3ff3
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/227243
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 0fabdbb05826160beb8ee8f89339b18a49e87ab8)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I4504d29a43084d4bd406626899b25903200fa6d7
Reviewed-on: http://review.coreboot.org/10740
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Now that we have functioning display code for all platforms,
we can just get rid of this ugly hack used on non-Chromebook
veyrons.
BUG=none
BRANCH=none
TEST=built for Brain, Rialto, Mickey, Romy
Change-Id: Ibe248c7cc74940811345c249d66992d74fe85fe5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9c627b087ba9fc07b4ec4a6d55d2e0203bdd4ff5
Original-Change-Id: I946eddb4e8ce1dbaa20212a2bb417e71a31b2ba3
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/282049
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/10785
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
This uses VOP_MODE_NONE for display init on veyron_rialto and
adds a mainboard_power_on_backlight() stub so that we can finally
get rid of SKIP_DISPLAY_INIT_HACK.
BUG=none
BRANCH=none
TEST=built for veyron_rialto
Change-Id: Ia6b420a962fe266e773c804b8e5c68da35848753
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a290c938c163759a3672c07d8ec7c0a38057b13d
Original-Change-Id: Iec2d7f03857198a4d6f7490db1e3e19c74f18c43
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/282048
Reviewed-on: http://review.coreboot.org/10784
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This adds a configure_hdmi() function that drives the HDMI
enable output high and configures the iomux. Calls to PMIC
functions to enable HDMI power are moved here as well.
BUG=none
BRANCH=none
TEST=with follow-up patches, we now get a dev screen on Brain.
Change-Id: Ifd2648376c789fb29c9e2e4ab6bdb10ca439e4a2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 91ec6a96edaf2042236aee0383e18715014f1013
Original-Change-Id: I0c6e9f8fc5e06f53a1a160d8ab2e32447168139e
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/282046
Reviewed-on: http://review.coreboot.org/10778
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This avoids any ambiguity or breakage in case the vop_modes get
shuffled around or changed in some future patch or copy+paste job.
Brain and Rialto need some more work done so their devicetree.cb
files will be updated in follow-up patches.
BUG=none
BRANCH=none
TEST=compiled only (for danger, jerry, mickey, romy, speedy)
Change-Id: I4fd549c82c8a5c31525c4e485fa8df73f33f2049
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: bd88973b53949058331613c7582650fbd4ea48db
Original-Change-Id: I47da45c5fd9648544392de8d76f86af812de9093
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/282610
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/10776
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
EDP-related hardware modifications for v2:
- BL_EN moved from GPIO7_A3 to GPIO7_A2
- EDP_HPD added to GPIO7_B3
BUG=none
BRANCH=none
TEST=built and booted Danger v2 with EDP panel attached, saw dev
mode screen come up
Change-Id: I47383610082b371a612aced656e56f1bd1cfa098
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fb939ff17cca7bbd24aabfdb3cbd444696a5a845
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: Id271cdcfcde6fa84c1bb707b9842bddd77a7121b
Original-Reviewed-on: https://chromium-review.googlesource.com/280855
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/10771
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
These are all Kconfig symbols that have been removed or renamed.
USE_PRINTK_IN_CAR was removed in commit 8c4f31b3
Drop the USE_PRINTK_IN_CAR option. It's a bogus decision...
DYNAMIC_CBMEM was removed in commit e2b0affd
Remove Kconfig variable that has no effect
MAINBOARD_HAS_BOOTBLOCK_INIT was removed in commit 342535cc
Remove Kconfig variable that has no effect
CACHE_ROM was removed in commit 4337020b
Remove CACHE_ROM.
SMM_MODULES was removed in commit 44cbe10f
smm: Merge configs SMM_MODULES and SMM_TSEG
INCLUDE_MICROCODE_IN_BUILD was removed in commit eb73a218
soc/fsp_baytrail: Fix use of microcode-related Kconfig variables
CAR_MIGRATION was removed in commit cbf5bdfe
CBMEM: Always select CAR_MIGRATION
REQUIRES_BLOB was removed in commit 70c85eab
build system: Retire REQUIRES_BLOB
CPU_MICROCODE_IN_CBFS was renamed to SUPPORT_CPU_UCODE_IN_CBFS in commit
66e0c4c8 - cpu: Rename CPU_MICROCODE_IN_CBFS to SUPPORT_CPU_UCODE_IN_CBFS
CONSOLE_SERIAL_UART was renamed to CONSOLE_SERIAL in commit afa7b13b
uart: Redefine Kconfig options
CONSOLE_SERIAL8250MEM was renamed to DRIVERS_UART_8250MEM in commit
afa7b13b - uart: Redefine Kconfig options
Change-Id: I8952ca8c53ac2e6cec5f9c77d2f413f086bfab9d
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/10766
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: Icab6bd9f55f086da7b51ae463f34e29366d50e1a
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/10764
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This fixes the build with CONSOLE_CBMEM_DUMP_TO_UART.
Change-Id: Ibe79239c5799a5c4a08ed195fce4d0c63d629ca4
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10769
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This patch fixes up verified boot (vboot2) configuration of all
tegra 124 bases boards in the tree.
Change-Id: I81f2e83821cbfdbe2a55095543e7447efdde494e
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10761
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Otherwise the Chrome OS build won't succeed.
Change-Id: Idf93a09f53d08b6c201f1de140f0fff35f928dcc
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10760
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Tested-by: build bot (Jenkins)
|
|
Copied from speedy, with changes to mainboard.c (and speedy -> minnie renames
across the directory)
Change-Id: Ib38f0b15da8306984869e7ee7b4ddf366b0df82c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10757
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I796e0fa64f9a858a54b09a82fbec1f0576e7e124
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10732
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I256410ff6c0107bbbaaf49b909d63ca61e88a22c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10731
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
This is an nvidia t210 based board.
This includes Chrome OS downstream up to Change-Id: Ic89ed54c.
Change-Id: I4d77659f4f2d21b1bbdcfc3467e1a166c02ddd47
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10635
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This is an nvidia t210 based board.
This includes Chrome OS downstream up to Change-Id: Ic89ed54c.
Change-Id: I8630e86a4b0e8756693f8989ce147d6d762cefe1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10634
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The Exynos SoC code and vboot really don't get along and things are not even
in a good shape in Chrome OS' top of tree. Disable but don't rip out the
support functions, so it could be revived.
Change-Id: I982c5a3731b527fd1f1579e9de353819da656452
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10730
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Initializing timestamps and writing the "start romstage" timestamp already
happens earlier.
One question to sort out is what to do about the migration into cbmem, but at
least this compiles again.
Change-Id: Ie8a0b7998c6c9da71f036857987f3c781385034f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10729
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Current vboot wants that function.
Change-Id: I9d3a592c448cf2af10f76cae4518341cbc0a6f41
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10727
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
A lot changed here between Chrome OS and upstream, and these changes are
needed to reflect that.
Change-Id: I7195861465388d0f6a7cb540ebf4e410e38c260a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10723
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
In Chrome OS mode, the romstage tries to interpret the various buttons on the
device, so it needs access to the accessor functions.
Change-Id: Iecfd37e79883d826e15c474d77095fbbbb2b7cea
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10705
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
In Chrome OS mode, the romstage tries to interpret the various buttons on the
device, so it needs access to the accessor functions.
Change-Id: I59a4f892ca84d475d8f46c8f8c1906dae10ad32d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10704
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
vboot configuration (separate stage or not, which stage loads romstage)
depends on SoC properties (eg. amount of SRAM), not on board specifics, so
move this part of the configuration to the SoC.
Change-Id: I70b4cd1794ddf2aba7cdae94859ea1d76ae019f4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10702
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
romstage requires some button accessor functions for the Chrome OS boot flow.
Change-Id: I3f90d66b103e0610931c183dd5f5679ca6f910f6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10697
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
This patch adds the Veyron_Shark mainboard as a clean copy of Veyron_Speedy.
- board-ID differentiation removed, see mainboard.c
- speedy -> shark rename
BRANCH=None
BUG=None
TEST=Compiled.
Change-Id: I3b743a97f152f49647eee87be8f1497377ccacb4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ac2ca328adf7e0dd879f51bbeae3cc11bceebf86
Original-Change-Id: I8a7cc9acb199ecf23b388c66f6885931ea3ec219
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/276490
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/10699
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
Not all devices have a lid switch, so we need to state this
somehow. Since the alternative would be to extend get_lid_switch()'s
semantics to become a tri-state (open, closed, N/A), do this
through Kconfig.
BRANCH=none
BUG=chromium:446945
TEST=none
Change-Id: Icc50f72535f256051a59925a178fb27b2e8f7e55
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d20a1d1a22d64546a5d8761b18ab29732ec0b848
Original-Change-Id: Ie8ac401fbaad5b5a9f1dec2b67847c81f4cc94aa
Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/273850
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Queue: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10692
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The function was used locally and in ramstage to set some
coreboot tables. It's also needed in romstage to deal with
"lid closed" behaviour.
BRANCH=none
BUG=chromium:446945
TEST=none
Change-Id: I8ad7061328c45803699321aa9f5edb0ed2288a8d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 78281a104fb9d79696a6ceb2a9a89a391146a424
Original-Change-Id: I56314b9dc9062dd61671982e7ec0ff15d7eb1bae
Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/273609
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Queue: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10691
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This re-factors SDMMC power on/off to make corrections and take
differences between board versions into account. To avoid similar-
but-different case switch statements in romstage.c and mainboard.c,
power on/off functions for SDMMC are split into their own .c file.
BUG=none
BRANCH=none
TEST=built and booted of micro-SD card on Danger v2
Change-Id: Ib3069c35ceff1ff98b49579a6298681c1390beee
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: eecfee4a5dd39073b5f966a25991a594b3c4b519
Original-Change-Id: Id86ae7f40687e843ffc4e7769309d4678ad54f49
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/280853
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/10685
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This adds a configure_hdmi() function that drives the HDMI
enable output high and configures the iomux.
We'll add EDP/HDMI auto-detection in an upcoming patch.
BUG=none
BRANCH=none
TEST=set vop_mode to 1 in Danger's devicetree.cb and saw
dev mode screen output to HDMI display.
Change-Id: I2a208059fee74d436b5a5bedbc677bc59525f935
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 721f326319f727afcf73a0c21d20d26cb463ad71
Original-Change-Id: I139d39749963d4121aaeec0c3da37d825ffa94ac
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/280849
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/10684
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add the System Board Hardware ID to fix the warning:
dsdt.aml 88: Device (MB) {
Warning 3141 - ^ Missing dependency
(Device object requires a _HID or _ADR in same scope)
Change-Id: I063580142ae8053fdc05e165c01e86b8b7cd5ca6
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/10668
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Where vboot verification can start, and how the code flow looks like is more a
property of the SoC (and its properties, like amount of SRAM) rather than the
board.
Change-Id: I610153ea4ceddc226d8cc3e17a515e41fc0479cf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10662
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
vboot requires it.
Change-Id: Iae2310c9b9c311c3f64b8417295685261ba404b0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10659
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Follow up for commit b890a12, some contributions brought
back a number of FSF addresses, so get rid of them again.
Change-Id: Icf83d5e2a3daea385af3572e9eac6b2431652c28
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10640
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
CAR_MIGRATION was removed in commit:
cbf5bdfe - CBMEM: Always select CAR_MIGRATION
ALT_CBFS_LOAD_PAYLOAD was removed in commit:
cf6c9cc2 - Kill ALT_CBFS_LOAD_PAYLOAD
MARK_GRAPHICS_MEM_WRCOMB was removed in commit:
30fe6120 - MTRR: Mark all prefetchable resources as WRCOMB.
EXTERNAL_MRC_BLOB was removed in commit:
0aede118 - Drop unused EXTERNAL_MRC_BLOB
CACHE_ROM is only in Google's codebase.
LID_SWITCH is only in Google's codebase.
DEFAULT_POST_DEVICE_LPC is only in Sage's codebase.
ROMSTAGE_RTC_INIT is only in Sage's codebase, or was never used.
HUDSON_NOT_LEGACY_FREE never existed as far as I can tell.
MAINBOARD_DO_EDID never existed as far as I can tell.
Change-Id: I636ea7584fb47885638dbcd9ccedfafb1ca2c640
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/10616
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The default route does work for all Chromebooks and is replaced
with platform-specific one in follow-up.
Change-Id: Ia1839ed38dacf44a89dc757394d054e17666f193
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/10442
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
This is only needed on boards that still provide old style PIRQ
tables.
Change-Id: Ie299de2937e5b91b7b3e1d1110e40be23c6d9f52
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10508
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Mickey:
- Does not have power key
- Does not have an audio codec(all audio goes thru HDMI)
- VCC18_LCD moved to VLDO8 and needs to be turned on (was
connected to VSWOUT2 earlier)
BUG=none
BRANCH=none
TEST=Boot from mickey board, and hdmi work normal
Change-Id: I88cdc41ce8bb96a6b17aeb7f24b1c5619471b24e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6c966edfa29df1049c469442dc3ad8bf8b4197b1
Original-Change-Id: I3d98203185f52ed751a5d3045a0ee8f9b4dfbc71
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/274876
Reviewed-on: http://review.coreboot.org/10630
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Cosmetic change only.
BUG=none
BRANCH=none
TEST=it compiles
Change-Id: Ibe86f624606e365457e03c50c005400d4b335536
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7dfc7002fbf5c100ae65458b33f5aa007dc8d60b
Original-Change-Id: Ibc03b028a7918d90cfab9614e800f6df463d86db
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/280851
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/10628
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Add the Google Auron Broadwell Reference Mainboard. It is based
on the Google Peppy mainboard. It was merged from the following
chromium.org commit: d20a1d1a22d64546a5d8761b18ab29732ec0b848
Change-Id: I716a79e198e91c428bd965fcd03665c2c7067602
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/10500
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Fix by checking the actual function return value (the search
address pointer), rather than the search length value (which isn't
guaranteed to be sane or useful).
Change-Id: I226c635ddbbc916b02494fcd97df27d141cc2c7f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: http://review.coreboot.org/10516
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Commit 899d13d (cbfs: new API and better program loading) broke
panther's lan init when no vpd.bin present from which to read
the MAC address. Fix this by checking the validity of the search
address pointer, rather than the search length.
Change-Id: I8c7ca410d8ce5c5d92242a21c4c2ff4c001a68bd
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: http://review.coreboot.org/10509
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Copy the Peppy directory. No changes.
Change-Id: I3fa382eaa40f642df8bc09ab69be67cbe9f3671a
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/10499
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I707802befe5b8aaafafc34b17cbdfe795777b6f6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/10501
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
Taken from CrOS, including everything up to commit da4c33913.
Adapted to upstream.
Change-Id: I095e6726a220200ba17719fc05fcdc521da484e8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10432
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Used command line to remove empty lines at end of file:
find . -type f -exec sed -i -e :a -e '/^\n*$/{$d;N;};/\n$/ba' {} \;
Change-Id: I816ac9666b6dbb7c7e47843672f0d5cc499766a3
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: http://review.coreboot.org/10446
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change the Kconfig board name symbol to uppercase to match
other symbols and to match the capitalization in the Kconfig
file where it's used in an expression.
Change-Id: I04ccb57cc15a6d7430f8d04136beb8384caa6c04
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/10440
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
|
|
This simply copies veyron_brain to veyron_mickey and makes the
minimal set of changes (s/brain/mickey) to make it compile. The
follow-up patch will take into account board differences.
BUG=none
BRANCH=none
TEST="emerge-veyron_mickey coreboot" doesn't fail
Change-Id: I7d029b36d2fb865446490b896117ade632325a52
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 34f6b391290f99caf517d7e98c31c89dc57309be
Original-Change-Id: I03a2b80eb441384f363910467180479521765431
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/271360
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/10408
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
This simply copies veyron_brain to veyron_romy and makes the
minimal set of changes (s/brain/romy) to make it compile. The
follow-up patch will take into account board differences.
BUG=none
BRANCH=none
TEST="emerge-veyron_romy coreboot" doesn't fail
Change-Id: Ice1bc012bddd6c51b43944747e0df3ffa34207fa
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0ab849178b69cf2323f126e503bd61080048240a
Original-Change-Id: I0516ce94fd3c6a38170fae221a070f503ccfaf0f
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/271345
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/10407
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
A new CBFS API is introduced to allow making CBFS access
easier for providing multiple CBFS sources. That is achieved
by decoupling the cbfs source from a CBFS file. A CBFS
source is described by a descriptor. It contains the necessary
properties for walking a CBFS to locate a file. The CBFS
file is then decoupled from the CBFS descriptor in that it's
no longer needed to access the contents of the file.
All of this is accomplished using the regions infrastructure
by repsenting CBFS sources and files as region_devices. Because
region_devices can be chained together forming subregions this
allows one to decouple a CBFS source from a file. This also allows
one to provide CBFS files that came from other sources for
payload and/or stage loading.
The program loading takes advantage of those very properties
by allowing multiple sources for locating a program. Because of
this we can reduce the overhead of loading programs because
it's all done in the common code paths. Only locating the
program is per source.
Change-Id: I339b84fce95f03d1dbb63a0f54a26be5eb07f7c8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9134
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I6416cd5780fbda0b3c2e236ce98a9f9a508e70c6
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10293
Tested-by: build bot (Jenkins)
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
|
|
Not used anywhere.
Change-Id: I9bab092d285aaebdf9283ba08e23197f9785b3a6
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10329
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
|
|
Old igd.asl had inconsistent addresses (between _DOD and actual device)
and ghost devices. Any of those is enough to make brightness on windows
fail and make igd.asl out-of-ACPI-spec. Also old code favoured ridiculous
copying of the same thing 6 times per chipset. Leave only hooking up and
chipset-specific part in chipset directory. Move NVS handling and ACPI-spec
parts to a common file.
Change-Id: I556769e5e28b83e7465e3db689e26c8c0ab44757
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7472
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
|
|
This code is not specific to ChromeOS and is useful outside of it.
Like with small modifications it can be used to disable TPM altogether.
Change-Id: I8c6baf0a1f7c67141f30101a132ea039b0d09819
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10269
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Brain doesn't have HOST1_PWR_EN (GPIO0_B3) and 5V_DRV (GPIO7_C5).
The only USB power enable pin connected to the AP is USB2_PWR_EN
(GPIO0_B4) which controls power for both the physical type-A ports.
BUG=none
BRANCH=none
TEST=built and booted on Brain, both USB host mode ports work
Change-Id: Iea371926c7dcd111aa2e671a15fe97a3519bfc04
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4db71095a5116666cd27aedb09b4f02557362346
Original-Change-Id: Ibbb4b9b424156eb3db1ccfdd948050c1c067ad3c
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/271309
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/10305
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: David Hendricks <dhendrix@google.com>
|
|
Instead of being pointer based use the region infrastrucutre.
Additionally, this removes the need for arch-specific compilation
paths. The users of the new API can use the region APIs to memory
map or read the region provided by the new fmap API.
Change-Id: Ie36e9ff9cb554234ec394b921f029eeed6845aee
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9170
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This code in reality just describes the southbridge features, don't put a copy
in every mainboard.
Change-Id: I8cf3019a36b1ae6a17d502e7508f36ea9fa62830
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10231
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I6a1b1daa291298c85e14f89aa47a0693837cec6f
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7037
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
|
|
As per discussion with lawyers[tm], it's not a good idea to
shorten the license header too much - not for legal reasons
but because there are tools that look for them, and giving
them a standard pattern simplifies things.
However, we got confirmation that we don't have to update
every file ever added to coreboot whenever the FSF gets a
new lease, but can drop the address instead.
util/kconfig is excluded because that's imported code that
we may want to synchronize every now and then.
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} +
$ find * -type f
-a \! -name \*.patch \
-a \! -name \*_shipped \
-a \! -name LICENSE_GPL \
-a \! -name LGPL.txt \
-a \! -name COPYING \
-a \! -name DISCLAIMER \
-exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} +
Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9233
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
acpi_fill_slit and acpi_fill_srat were removed in commit 5e597572e.
Take care of the boards that were added in the mean time.
Change-Id: I907e51de5d4ce9acfcce82e6bb30eefff312d35d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10266
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
SLIT and SRAT are created this way only on amdk8 and amdfam10.
This saves the need of having a lot of dummies.
Change-Id: I76d042702209cd6d11ee78ac22cf9fe9d30d0ca5
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7052
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I9c938b8a69479fae6b0eb99d1135f1caaf26d0e2
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10227
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The variable was set on all haswell boards, so we can do it like on
broadwell where the MSR based timer is assumed to be around, too.
Change-Id: Id48ad7454d4cf83c3b1616b64687cdcfee4baa10
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10256
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
MAINBOARD_HAS_BOOTBLOCK_INIT is only declared once and selected elsewhere
(with no overlap), and never read. Remove it.
Change-Id: Ica1f16182b556dbf4a3b747237af74bcc4c0608c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10254
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Rename Kconfig options for secmon and spintable to be prefixed with
ARM64_ instead of ARCH_, which seems to be the standard throughout the
rest of coreboot (e.g. ARM_LPAE or X86_BOOTBLOCK_SIMPLE). I think this
provides a clearer separation between generic options that are selected
by the architecture (e.g. a hypothetical ARCH_HAS_FEATURE_X similar to
some of the MAINBOARD_HAS_... we have) and options that only make sense
in the context of a single architecture.
Change-Id: I38c2efab833f252adbb7b61ef0af60ab25b768b0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5067e47bc03f04ad2dba044f022716e0fc62bb9e
Original-Change-Id: I1b2038acc0d054716a3c580ce97ea8e9a45abfa2
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/270783
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10242
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Sample code belongs to documentation, not copied 100x over prodcution code.
Change-Id: I6bb318d76057d02bd6ac5641d12d56ab6d60b745
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10229
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
We already have APM_CNT_FINALIZE defined to the same value. Just use it
thoughout.
Change-Id: Ife94ec7a34da27d3a720bda7337c02e41f18ac72
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10226
Tested-by: build bot (Jenkins)
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
|
|
vboot_verify_firmware() was only defined to ease upstreaming.
It was only an empty inline as it is so remove it. Additionally,
vboot2 does not require romstage_handoff so there's no need in
adding it for the nyan boards.
Change-Id: I4d84ac9fb60c756cf10742f26503f7f11af5f57b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10155
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Adopted style from later Chromebooks.
Change-Id: I4993b8f40489b6bf5d08e00089f36f293853629e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/9992
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The vboot mechanism will be implemented within the program loader
subsystem to make it transparent to mainboards and chipsets.
Change-Id: Icd0bdcba06cdc30591f9b25068b3fa3a112e58fb
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10094
Tested-by: build bot (Jenkins)
|
|
On current Danger boards, VCC_LCD is gated by BL_EN. Thus we
need to enable BL_EN in order to power on the display so that
we can read the EDID and set things up.
Later board revisions may change this ordering, but for now it
doesn't seem to be causing a significant issues (no noticable
"snow" or other corruption using Pepto display).
BUG=none
BRANCH=none
TEST=booted on Danger, saw dev mode screen come up
Change-Id: I70aab8c1f6da2d0fce310d59073026eef0f67821
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1a918824e747600a2f3a88602320f4f563ce17b7
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: Iaf17cc4682bd3c46f62cba789e3ecf8d5a474362
Original-Reviewed-on: https://chromium-review.googlesource.com/266913
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/10089
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
This patch initializes the GPIO for the Chrome EC interrupt line on
Veyron boards and passes its description through the coreboot table, so
that payloads with keyboard support can use it to detect pending key
presses.
BRANCH=none
BUG=chrome-os-partner:39514
TEST=Booted Jerry, confirmed that it could still detect keypresses.
Confirmed that EC log does not show a huge amount of MKBP polls.
Change-Id: I4de35ef411c3acc02282ebf8e764785a1e7bf6f1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8ad95d667ef3af3fb217e3c370468dc1d6ec36c9
Original-Change-Id: I8b426621af088460929cfff0a4b46618e2a86725
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/267344
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: http://review.coreboot.org/10088
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Remove dependency of Haswell on cpu/intel/socket_rpga989 code,
which is a carry-over from Sandy Bridge/Ivy Bridge and older
coreboot conventions where features were structured around socket types.
Add CPU-specific options to Kconfig and required subdirs to
Makefile.inc which are curently included with socket_rpga989.
TEST=successfully built and booted on google/panther
Change-Id: Ic788e2928df107d11ea2d2eca7613490aaed395c
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: http://review.coreboot.org/10037
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
That's a Haswell exclusive, used nowhere else, but confusing
when hunting for the monotonic timer used on that SoC.
Change-Id: I60ec523e54e5af0d2a418bcb9145de452a3a4ea9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10034
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
trivial whitespace fixes. Mostly changing leading spaces to tabs.
Change-Id: I0bdfe2059b90725e64adfc0bdde785b4e406969d
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/10000
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
These options will need to just be selected in within
the .config files. There's not need in duplicating all
these options.
Change-Id: I7b670bc59a3b35e39eee4faecaf4aa779d47a3bb
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9959
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
There's no need to have the VBOOT2_VERIFY_FIRMWARE
distinction because it's the only game in town.
Change-Id: I82aab665934c27829e1a04115bf499ae527a91aa
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9958
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
If verified boot is enabled, merge verstage into bootblock. This also
requires custom bootblock code to actually call into verstage.
[pg: modified to match upstream]
BUG=chrome-os-partner:32631
BRANCH=ToT
TEST=booted on cosmos development board.
Change-Id: I53251aac966ee15da24232c23fefa636de8b253b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2b8ada263017b46afa755b5acb759574184dba06
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: Ia0e1236357aa32bf553fb8cc98f3a8d29de17f45
Original-Reviewed-on: https://chromium-review.googlesource.com/229795
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/10008
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Move the GPI interrupt routing selection between SMI/SCI from
mainboards to southbridge. There is speculation if this is all
just legacy APM stuff that could be removed with a followup.
Change-Id: Iab14cf347584513793f417febc47f0559e17f5a5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/7967
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
|
|
This patch enables on storm the recently introduced 'console buffer
dump on reboot' capability.
BRANCH=none
BUG=chromium:475347
TEST=generated storm image with serial console disabled and both rw
firmware A and B sections corrupted. Programmed the new image on
an SP5 device and rebooted it. Observed the device dump cbmem
console buffer to the serial output, terminating with
VB2:vb2_fail() Need recovery, reason: 0x3 / 0xa
Reboot requested (1008000a)
Saving nvdata
SF: Detected S25FL128S_256K with page size 10000, total 2000000
and the LED ring started flashing indicating recovery mode.
Change-Id: Idb50c86f59f393c783ccbc15de8f5564e2a1b38e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0ec88001b152bb9f1d7268b83367131b004816f8
Original-Change-Id: I9345eeb4d375f42fb1e4c617495b63b308ce51d9
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/265295
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9986
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Instead of switching off the LED ring for the normal boot path, turn
it on with the dedicated pattern, indicating that the device firmware
has started executing.
BRANCH=storm
BUG=chrome-os-partner:39044
TEST=program the new firmware on an SP5 device and verify that the new
'normal boot' pattern is displayed in all following scenarios:
- power up the device (the pattern shows within the first second)
- boot the device to bash prompt and restart.
- press the recovery button and reboot the device. Once the LED ring
shows the 'recovery button pressed' pattern, release the recovery
button.
Change-Id: Iedd66d2575ad587af77e35d23efb22a83a92858b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 092358bd17a323d0bd2fec555f43cb587486bbec
Original-Change-Id: I24de45326eab83b57bcf16b5598388f81c7d0f00
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/265536
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9923
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|