summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Expand)Author
2017-05-05google/scarlet: Enable innolux,p079zca MIPI panelNickey Yang
2017-05-05mainboard/google/sand: Update DPTF parameters provided from thermal teamKatherine Hsieh
2017-05-05google/fizz: Enable devices under pci 1c.0Shelley Chen
2017-05-05mainboard/google/poppy: Enable MODE_CHANGE event in SCI_MASKFurquan Shaikh
2017-05-04mb/google/eve: Remove code to set keyboard backlight at bootDuncan Laurie
2017-05-04mb/google/eve: Set SUSWARN# pin to native functionDuncan Laurie
2017-05-03google/gru: skip usbphy1 setup for Scarletphilipchen
2017-05-03mainboard/google/poppy: Add support for cr50 I2C TPMFurquan Shaikh
2017-05-03mainboard/google/poppy: Update GPIO table for next buildFurquan Shaikh
2017-05-01acpi: fix FADT header version for ChromeOS devicesMatt DeVillier
2017-04-29rowan: Fix default test HWID.Patrick Berny
2017-04-28mainboard/google/soraka: Add support for memory configs 1,2,7 and 8Furquan Shaikh
2017-04-28mainboard/google/poppy: Add SPDs for memory config 1 and 2Furquan Shaikh
2017-04-28mainboard/google/poppy: Enable separate MRC cache for recovery modeFurquan Shaikh
2017-04-28google/gru: tpm on bob: cr50: add irq clear/irq status for tpm irqJeffy Chen
2017-04-28google/oak: Configure SD card detect pin with a pull-upJulius Werner
2017-04-27mb/google/eve: switch touchpad devicetree to i2c-hid and cros_ec i2c deviceWei-Ning Huang
2017-04-27google/poppy: Enable PD MCU deviceShamile Khan
2017-04-27google/fizz: Configure HDMI HPD to use native functionShelley Chen
2017-04-27google/fizz: Enable SATA on port 1Shelley Chen
2017-04-25google/gru: change the sd power sequenceCaesar Wang
2017-04-25google/oak: Enable dual DSI for rowan and the BOE 8-lane MIPI/DSI panelDaniel Kurtz
2017-04-25mediatek/mt8173: Add support for Dual DSI outputJitao Shi
2017-04-25google/oak: Use edid_set_framebuffer_bits_per_pixelDaniel Kurtz
2017-04-24google/oak: Support cr50 over I2C on rowanVadim Bendebury
2017-04-24mainboard/google/reef: Remove DRIVER_TPM_I2C_IRQDaniel Kurtz
2017-04-24mainboard/google/eve: Remove DRIVER_TPM_I2C_IRQDaniel Kurtz
2017-04-24mainboard/google/reef: Add TPM_TIS_ACPI_INTERRUPTDaniel Kurtz
2017-04-24mainboard/google/eve: Add TPM_TIS_ACPI_INTERRUPTDaniel Kurtz
2017-04-24mainboard/google/poppy: use intel common tis_plat_irq_status()Aaron Durbin
2017-04-24Kconfig: provide MAINBOARD_HAS_TPM_CR50 optionAaron Durbin
2017-04-24mb/google/fizz: Set lid status as openNaresh G Solanki
2017-04-24mb/google/fizz: Configure PCI root portNaresh G Solanki
2017-04-24google/fizz: Configure memoryShelley Chen
2017-04-24*.asl: Remove obsolete reference to TPM ASL filePatrick Rudolph
2017-04-20mainboard/google/eve: Set touchpad IRQ to level triggeredDuncan Laurie
2017-04-19google/gru: change kevin boot-time center logic voltage to 925mVDouglas Anderson
2017-04-19google/gru: change center logic voltage to 900mVDerek Basehore
2017-04-19mainboard/google/poppy/variants/soraka: add soraka boardYH Lin
2017-04-19mainboard/google/poppy: Provide nhlt variant APIFurquan Shaikh
2017-04-19mainboard/google/poppy: Provide memory configuration variant APIFurquan Shaikh
2017-04-19mainboard/google/poppy: Provide cros_gpio variant APIFurquan Shaikh
2017-04-19mainboard/google/poppy: Add variant API for board_id and gpioFurquan Shaikh
2017-04-19mainboard/google/poppy: Provide baseboard and variant conceptsFurquan Shaikh
2017-04-19mainboard/google/poppy: Prepare sharing directory for variantsFurquan Shaikh
2017-04-19mb/google/poppy: Add camera supportV Sowmya
2017-04-19mb/google/poppy: Add Image Processing Unit ASLSowmya
2017-04-18mainboard/google/poppy: Clean up gpio.h fileFurquan Shaikh
2017-04-18mainboard/google/poppy: Enable deep S3 in DC modeFurquan Shaikh
2017-04-15google/slippy: fix internal mic for falco/wolf variantsMatt DeVillier
2017-04-15mainboard/google/eve: Remove 'probed' setting from rt5663 codecDuncan Laurie
2017-04-14google/slippy: clean up NGI and move to libgfxinitMatt DeVillier
2017-04-14mainboard/google/eve: Remove ACPI ALS deviceDuncan Laurie
2017-04-14mainboard/google/eve: Set UART0 to skip initialization in FSPDuncan Laurie
2017-04-14mainboard/google/eve: Enable internal pull-down on USB_C{0,1}_DP_HPDDuncan Laurie
2017-04-13mainboard/google/reef: Configure sdcard card detect (CD) pin GPIO_177Venkateswarlu Vinjamuri
2017-04-13mainboard/google/snappy: Increase weida touchscreen reset delayWisley Chen
2017-04-13google/eve: Disable Deep S3 in AC modeDuncan Laurie
2017-04-13google/eve: Enable WiFi SAR featureDuncan Laurie
2017-04-13soc/intel/skylake: Split AC/DC settings for Deep Sx configDuncan Laurie
2017-04-13mainboard/google/poppy: Enable internal pull-down on USB_C{0,1}_DP_HPDFurquan Shaikh
2017-04-13mainboard/google/poppy: Add support for cr50 SPI TPMFurquan Shaikh
2017-04-11scarlet/gru: skip display because mipi driver not readyShunqian Zheng
2017-04-11google/eve: Limit memory SKU 5 to 1600MHzDuncan Laurie
2017-04-10google/eve: Update I2C bus timingDuncan Laurie
2017-04-083rdparty/libgfxinit: Update submodule pointerNico Huber
2017-04-06gru: Initialize I2C bus for ARC2C0608Philip Chen
2017-04-05mainboard/google/reef: increase trackpad data hold timeAaron Durbin
2017-04-05mainboard/google/poppy: Change SD card detect to GPP_E15Furquan Shaikh
2017-03-29mainboard/google/reef: turn off DMIC_CLK_B1 in S0ixSathyanarayana Nujella
2017-03-28vboot: Move remaining features out of vendorcode/google/chromeosJulius Werner
2017-03-28chromeos / broadwell / jecht: Make save_chromeos_gpios() jecht-specificJulius Werner
2017-03-28vboot: Assume EC_SOFTWARE_SYNC and VIRTUAL_DEV_SWITCH by defaultJulius Werner
2017-03-28vboot: Remove VBOOT_DYNAMIC_WORK_BUFFER Kconfig optionJulius Werner
2017-03-28vboot: Select SoC-specific configuration for all Chrome OS boardsJulius Werner
2017-03-27ec: Use EC_ENABLE_LID_SWITCH for all mainboards with LID using chromeecFurquan Shaikh
2017-03-27mainboard/google/rambi: Move SIO_EC_ENABLE_PS2K to onboard.hFurquan Shaikh
2017-03-24mainboard/google/snappy: Update DPTF settingsWisley Chen
2017-03-23google/fizz: Update device tree from schematicShelley Chen
2017-03-23google/fizz: Transfer gpio from schematicShelley Chen
2017-03-23google/fizz: Remove poppy-specific configsShelley Chen
2017-03-23google/fizz: Add new boardShelley Chen
2017-03-22mainboard/google/reef: add nasher variantYH Lin
2017-03-21google/pyro: Update DPTF settingsKevin Chiu
2017-03-21mainboard/google/poppy: Use sideband IRQ for SD Card DetectFurquan Shaikh
2017-03-21google/sand: Add Raydium touchscreen deviceKatherine Hsieh
2017-03-20mainboard/google/snappy: Update _hid name for weida touchscreenWisley Chen
2017-03-19mb/google/reef: Remove CPU throttling effect of the charger sensorSumeet Pawnikar
2017-03-17google/veyron: Clean out unused board variantsJulius Werner
2017-03-17google/veyron: Work around RAM code strapping errorJulius Werner
2017-03-17mainboard/google/poppy: Enable EC SW syncFurquan Shaikh
2017-03-16google/poppy: Use rt5663 interrupt as GpioInt instead of PIRQRizwan Qureshi
2017-03-16google/eve: Use rt5663 interrupt as GpioInt instead of PIRQDuncan Laurie
2017-03-16mainboard/google/reef: Increase PL2 Max to 15WTim Chen
2017-03-15google/eve: Update MCU GPIOs configurationVincent Palatin
2017-03-15google/eve: Apply default AC/DC loadline settingsDuncan Laurie
2017-03-15intel/skylake: Fix bug in VR configuration with FSP 2.0Duncan Laurie
2017-03-15google/eve: Use rt5514 instead of 4ch DMICDuncan Laurie
2017-03-15mainboard/google/reef: Add FPF_STATUS FMAP regionAndrey Petrov
2017-03-14google/sand: Remove support for tablet mode switchKatherine Hsieh
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-30 19:19:12 +0000