summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Collapse)Author
2021-06-04mb/google/brya: Add firmware configuration probing for audioSugnan Prabhu S
For all of the audio devices in overridetree.cb add the probe matches that will determine if the device should be enabled or not based on the selected audio daughter board type. AUDIO=MAX98357_ALC5682I_I2S: enable max98357, dmic1 and alc5682i AUDIO=MAX98373_ALC5682_SNDW: enable max98373, dmic2 and alc5682 BUG=b:188696010 TEST=test different audio devices based on fw_config value: > AUDIO=UNKNOWN ectool cbi set 6 0x00000000 4 2 > AUDIO=MAX98357_ALC5682I_I2S ectool cbi set 6 0x00000100 4 2 > AUDIO=MAX98373_ALC5682_SNDW ectool cbi set 6 0x00000200 4 2 Change-Id: I6f159442516830f9d304d78c83f070e4fcff4a37 Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54716 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-06-04mb/google/guybrush/var/guybrush: Reconfigure left speaker amplifierKarthikeyan Ramasubramanian
In order to resolve the I2C address conflict with another peripheral in the upcoming hardware build, left speaker amplifier I2C address is reconfigured. BUG=b:188539052 TEST=Build Guybrush mainboard. On Guybrush board ID 1, all the 3 speaker amplifiers are added to the ACPI table. \_SB.I2C2.D028: Realtek SPK AMP L at I2C: 03:28 \_SB.I2C2.D029: Realtek SPK AMP R at I2C: 03:29 \_SB.I2C2.D02A: Realtek SPK AMP L1 at I2C: 03:2a At the OS side, the concerned speaker amplifiers are probed and enumerated. localhost ~ # i2cdetect -y -r 2 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- UU -- -- -- -- -- 20: -- -- -- -- -- -- -- -- UU UU -- -- -- -- -- -- 30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 70: -- -- -- -- -- -- -- -- Change-Id: I69a7e7dd65a459c2e5629ada1dea1f1660dd9990 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55028 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-06-04mb/google/dedede/var/blipper: Configure I2C times for touchpad/touchpanel/codecTao Xia
Configure I2C rise/fall time in device tree to ensure I2C CLK runs accurately at I2C_SPEED_FAST (<400 kHz). Measured I2C frequency changes are just as below after tuning: touchpad: 434kHz ---> 391kHz touchpanel: 439kHz ---> 382kHz audio codec RT5682: 445kHz ---> 385kHz BUG=b:187555396 BRANCH=dedede TEST=Build and check after tuning I2C clock is under 400 kHz Signed-off-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com> Change-Id: I8438e37be49f8a74f53fd8460110dac1a3f06993 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54249 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-06-04mb/google/brya/brya0: Fix irq and CS lines for FPMCUTim Wawrzynczak
The entries in the ACPI tables for the fingerprint module's SPI configuration were incorrect. 1) The GPIO is routed to IOAPIC (and SCI), therefore in ACPI, it must be described by Interrupt(), not GpioInt() 2) The chip-select signal was selected as 1, not 0 `device spi 0/1 on` BUG=b:181635081 TEST=verified in kernel logs: localhost # ~ dmesg|egrep 'cros-ec-dev|cros-ec-spi' [ 4.569412] cros-ec-dev cros-ec-dev.1.auto: CrOS Fingerprint MCU detected [ 4.575303] cros-ec-spi spi-PRP0001:00: Chrome EC device registered Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I9ef6c99f011969fc444e0c12b806529cb82bba3d Reviewed-on: https://review.coreboot.org/c/coreboot/+/55147 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-04intel/common/block: Move mainboard api to tcss common blockDeepti Deshatty
As per the comments in CB:54090 mainboard api mainboard_tcss_get_port_info() is simplified and moved to tcss common block code. Signed-off-by: Deepti Deshatty <deepti.deshatty@intel.com> Change-Id: I7894363df4862f7cfe733d93e6160677fb8a9e31 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54733 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-06-04mb/google/dedede/var/cret: Add new Elan touchscreenDtrain Hsu
Add Elan eKTH7D18 touchscreen into devicetree for cret. BUG=b:180547935, b:187484857 BRANCH=dedede TEST=Built cret firmware and verified touchscreen function. Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: Iab87ddfc7b46420439efa3e7e55c88ad4c27155d Reviewed-on: https://review.coreboot.org/c/coreboot/+/54868 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-06-04mb/google/dedede/var/storo: Modify I2C times for touchpadZanxi Chen
Configure I2C rise/fall time in device tree to ensure I2C CLK runs accurately (380<frequency<400 kHz). Measured touchpad I2C frequency is 394 kHz BUG=b:189740533 BRANCH=dedede TEST=Build bios and make sure frequency meets specification. Change-Id: Ibc0504a5be6fe9237b8b30783c659a761d10561a Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55109 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-06-03mb/google/dedede/var/sasukette: Modify the touch pad I2C addressTao Xia
There are two touch pads that Sasukette used have the same I2C address. It will show "/dev/input/event4: SPPT2600:00 06CB:CE9D Touchpad" when the Synaptics touch pad is connected after running evtest under VT2. BUG=b:189520603 BRANCH=dedede TEST=It will show "/dev/input/event4: SYNA0A00:00 06CB:CE9D Touchpad" when the Synaptics touch pad is connected after running evtest under VT2. Signed-off-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com> Change-Id: If0bd80baa27dfeb7bcb43f0ca4b02e1228e372a6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55035 Reviewed-by: zanxi chen <chenzanxi@huaqin.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-03mb/google/brya: Create primus variantScott Chao
Create the primus variant of the brya0 reference board by copying the template files to a new directory named for the variant. (Auto-generated by create_coreboot_variant.sh version 4.5.0) BUG=b:188272162 BRANCH=None TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_PRIMUS Signed-off-by: Scott Chao <scott_chao@wistron.corp-partner.google.com> Change-Id: I26787f296793b281b7f1ee1a7d240006163c6015 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55132 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-06-03mb/google/brya: Add support for 2 new DRAM partsAmanda Huang
1) Hynix H9HCNNNCPMMLXR-NEE 2) Micron MT53E1G32D2NP-046 WT:B BUG=b:186616388, b:181736400 Change-Id: I56bfe8aa4f8d8aab2011fa8d17b3b2c8659658e3 Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54951 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-03mb/google/brya: move MIPI camera setting into overridetreeScott Chao
In order to support no MIPI camera variant, move related configuration into variant folder. BUG=b:188272162 BRANCH=none TEST=build no MIPI camera variant without error Signed-off-by: Scott Chao <scott_chao@wistron.corp-partner.google.com> Change-Id: I4e64d078a8e39732ad29443c3b09ca008a7e902f Reviewed-on: https://review.coreboot.org/c/coreboot/+/55134 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-06-02mb/google/volteer/var/volet: Update gpio and devicetree settingsSheng-Liang Pan
Based on schematic and gpio table of volet, update gpio and devicetree settings for volet Proto. BUG=b:186334008 TEST=FW_NAME=volet emerge-volteer coreboot chromeos-bootimage Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: Ia0e9557e01ce1e7a49a3dddf6da3e4a29587a8b7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55113 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-02mb/google/volteer/var/volet: add volet memory configuration.Sheng-Liang Pan
volet use same memory configuration from Voxel, copy voxel setting to volet. BUG=b:186334008 TEST=FW_NAME=volet emerge-volteer coreboot chromeos-bootimage Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: I7e65b18f2ddae3d1ce02d9006153269697188f61 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55096 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-01mb/google/brya: Enable WFCMeera Ravindranath
1. Add 1 port and 1 endpoint 2. Add support for OVTI8856 WFC is on I2C0 BUG=None BRANCH=None TEST=Build and boot brya Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com> Change-Id: Ic5e9c28f255bdf86a68ce80a4f853be4e7c7ccfe Reviewed-on: https://review.coreboot.org/c/coreboot/+/52013 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-06-01mainboards using soc/amd/picasso: use aliases for remaining PCIe devicesFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Id2bdce5871f57e9edb17f89cba61b5c5ae018566 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55104 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-06-01mainboards using soc/amd/picasso: use aliases for PCIe devices on bus 0Felix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia6199c70163d32467abe5ba5da55c73ff62ba10f Reviewed-on: https://review.coreboot.org/c/coreboot/+/55103 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-06-01soc/amd/picasso: introduce and use chipset device treeFelix Held
The chipset devicetree only has the essential PCIe devices enabled that are needed for the SoC code to work. It also defines aliases for all PCIe devices that can be used to reference the devices in the mainboard- specific devicetrees and devicetree overrides. To make the change easier to review that part will be done in a follow-up patch. Despite missing in the PPR, device pci 18.7 exists on Picasso. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I6b7c3fd32579a23539594672593a243172c161c7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50626 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-05-28mb/google/volteer/var/collis: Update DPTF parametersFrankChu
Update the first version DPTF parameters received from the thermal team. BUG=b:188936764 TEST=emerge-volteer coreboot chromeos-bootimage Cq-Depend: chrome-internal:3851737 Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com> Change-Id: Id14b1d0bdd48c65eafbdd2e80b4611c86781be00 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54858 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-28mb/google/dedede: Update Storo setting for PEN detection.Zanxi Chen
Update devicetree and gpio driving of storo that enable stylus Updates the GPIO configuration for GPP_C12 to PAD_CFG_GPI_GPIO_DRIVER and device tree entry for PENH device to use WAKEUP_ROUTE_GPIO_IRQ. BUG=b:188519508,b:188365033 BRANCH=dedede TEST=build bios and the pen behavior can be detected. Change-Id: I2ffc969569b3ca29ba76326140f958a9707199f7 Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54762 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-28mainboard/google/brya: Add S3/S0ix wake events AC connect/disconnectmadhusudanarao amara
Enabling AC connect/disconnect wake events in brya to meet Chrome OS wake requirements. These changes are similar to Volteer and Shadowmountain. BUG=none BRANCH=None TEST=manual tested DUT wakes for AC connect/disconnect in S0ix Change-Id: I14b3efd429e3aa701af534f150baf35fcdeb9f35 Signed-off-by: madhusudanarao amara <madhusudanarao.amara@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54855 Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Sooraj Govindan <sooraj.govindan@intel.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-27tpm: Remove USER_TPMx options, make TPM1/TPM2 menuconfig visibleJulius Werner
We would like to have an easy way to completely disable TPM support on a board. For boards that don't pre-select a TPM protocol via the MAINBOARD_HAS_TPMx options, this is already possible with the USER_NO_TPM option. In order to make this available for all boards, this patch just removes the whole USER_TPMx option group and directly makes the TPM1 and TPM2 options visible to menuconfig. The MAINBOARD_HAS_TPMx options can still be used to select defaults and to prevent selection of a protocol that the TPM is known to not support, but the NO_TPM option always remains available. Also fix some mainboards that selected TPM2 directly, which they're not supposed to do (that's what MAINBOARD_HAS_TPM2 is for), and add a missing dependency to TPM_CR50 so it is set correctly for a NO_TPM scenario. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Ib0a73da3c42fa4e8deffecb53f29ee38cbb51a93 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54641 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Christian Walter <christian.walter@9elements.com>
2021-05-27mb/google/guybrush,mancomb: enable crypto coprocessor PCIe deviceFelix Held
This fixes the following error from the Linux kernel: ccp 0000:03:00.2: ioremap failed ccp 0000:03:00.2: initialization failed ccp: probe of 0000:03:00.2 failed with error -12 BUG=b:186575712,b:189202985 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I5cbc620001d3c21c538b62ab2811b6e07269feb2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54962 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-27Mancomb: Add firmware config CBI definitionsMartin Roth
The firmware config field in CBI lets us control initialization parameters based on the OEM design. BUG=b:188713024 TEST=Build Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I56ddc7218688919f20f41e0f143419c39d83849d Reviewed-on: https://review.coreboot.org/c/coreboot/+/54732 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-05-27soc/amd/picasso: add devicetree setting for PSPP policyFelix Held
Since the default for the corresponding UPD of the Picasso FSP is DXIO_PSPP_POWERSAVE and the devicetree default is DXIO_PSPP_PERFORMANCE, add a deviectree setting for each board that's using the Picasso SoC code to not change the setting for the existing boards. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I0008ebb0c0f339ed3bdf24ab95a20aa83d5be2c9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54934 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-05-27mb/google/mancomb: set PSPP policy to balancedFelix Held
Not sure which policy we should select here or if that should be done in the board-specific devicetree overrides instead of the baseboard. BUG=b:188793754 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I792d909ce75cb73571c9fec58c18f749ea3ae029 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54933 Reviewed-by: Matt Papageorge <matthewpapa07@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-27mb/google/guybrush: set PSPP policy to powersaveFelix Held
BUG=b:188793754 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I262c4c3ae90d8d12fdfe71a3620739070a444a55 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54931 Reviewed-by: Matt Papageorge <matthewpapa07@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-26src/mainboard/google/guybrush: update devicetree with USB settingsJulian Schroeder
All relevant USB phy settings can now be controlled via devicetree. The given values are the AMD default ones. For proper tuning procedure and values contact AMD. Signed-off-by: Julian Schroeder <julianmarcusschroeder@gmail.com> Change-Id: Ie8d08bde54f8c0cb8202ba111b9c7a9bd33fa03e Reviewed-on: https://review.coreboot.org/c/coreboot/+/54785 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-05-26mb/google/asurada: Allow payloads to enable USB VBUSYu-Ping Wu
Configure GPIO CAM_PDN5 (AP_XHCI_INIT_DONE) as output, so that payloads (for example depthcharge) can assert it to notify EC to enable USB VBUS. BUG=b:187149602 TEST=emerge-asurada coreboot BRANCH=asurada Change-Id: I3bf63f91b8057e35be2780024a8b398c3044729b Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54902 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-26mb/google/dedede: add haboki variantWisley Chen
haboki/habokay is the same design as drawlat/drawcia, and differs only in replacing Cr50 with discrete TPM. BUG=b:187094464 TEST=FW_NAME=haboki emerge-keeby coreboot Cq-Depend: chrome-internal:3850094 Change-Id: Id866927b7041c5bf1c73fb4f0c03798eb61efa79 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54755 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-26mb/google/cherry: Support audioTrevor Wu
Add GPIO "beep enable" for switching on and off. Signed-off-by: Trevor Wu <trevor.wu@mediatek.com> Change-Id: Iddb781e30fa90f05767cceeb83e623432540dcc0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54739 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-05-25mb/google/dedede/var/cret: Generate new SPD ID for new memoryDtrain Hsu
Add new memory MT53E512M32D1NP-046 WT:B in the mem_parts_used.txt and generate the SPD ID for the parts. BUG=b:183057749 BRANCH=dedede TEST=Build the cret board. Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: Ib797af858e8f7ea275291e552102db74f4724aad Reviewed-on: https://review.coreboot.org/c/coreboot/+/54747 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-25mb/google/guybrush: Add Goodix touchscreenIvy Jian
Add Goodix touchscreen according to the Programming Guide Rev.0.7 BUG=b:188872893 TEST=build and boot into OS. check dmesg trying to add GDIX0000:00 device. Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Change-Id: I38c9bbf6e1c1531bf3524552db58c0bf183acbb4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54760 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-05-24mb/google/puff/var/dooly: Update CPU PSV to 85 degrees.Tony Huang
BUG=b:189053502 BRANCH=puff TEST=build image and verified by thermal team. Change-Id: Ic2337b9eabef158633c5e6dfa935ed5c8d3d76d1 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54718 Reviewed-by: Sam McNally <sammc@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-24Revert "mb/google/brya/brya0: Manually probe fw_config for DB_LTE"Tim Wawrzynczak
This reverts commit 2f8a7046bb120d96022ada1e74545f859f97521f. Reason for revert: CB:54752 makes this unnecessary Change-Id: I3ad0bcafe50e3eafb9a106720c6c9ea5cb0efc4f Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54789 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-22mb/google/dedede/var/sasukette: Enable ELAN touchpadlizhi7
Add ELAN touchpad into devicetree for sasukette. BUG=b:188376649 BRANCH=dedede TEST=built sasukette firmware and verified touchpad function Signed-off-by: lizhi7 <lizhi7@huaqin.corp-partner.google.com> Change-Id: I898aeda936eb10ef4ead679a1c087060fad71a08 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54369 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-22mb/google/dedede/var/drawcia: Support Synaptics touchpadTony Huang
Drawper would use synaptics touchpad. BUG=b:184878424 TEST=emerge-dedede coreboot and check touchpad function work. Change-Id: I2d2c205e19d8e3472e0fa7ca20fd38e381ac0de0 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54756 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-05-22mb/google/mancomb: Update AMD I2S Machine DriverIvy Jian
Update ACPI HID to 10025682 for Machine driver probe BUG=b:187912480 TEST=Build and boot to OS in Mancomb. Ensure that the sound card probed. Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Change-Id: I5dc87c7a8fb876adc26165655f8f2d4157aa68c9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54749 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-21mainboard/google/brya: Add SCI event EC_HOST_EVENT_USB_MUXmadhusudanarao amara
Send USB_MUX host event for the connect/disconnect type C devices. BUG=none BRANCH=None TEST=manual tested USB connect/disconnect Change-Id: I5a720e1f1ea42f200e0e4c98f42894e4b92c67f8 Signed-off-by: madhusudanarao amara <madhusudanarao.amara@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54725 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Sooraj Govindan <sooraj.govindan@intel.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-21mb/google/mancomb: Enable S0ixKarthikeyan Ramasubramanian
BUG=b:188446049 TEST=Build and boot to OS in mancomb. Ensure that the system can suspend and resume successfully. Ensure that the sleep state GPIOs are reflecting the state as expected. Change-Id: I43e86a07075fe66f89c2c5665adc209e985e4f04 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54687 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-05-21mb/google/dedede/var/drawcia: Support HDMI VBT for DrawperTony Huang
Drawper support LTE+HDMI, so use DB_PORTS_1A_HDMI_LTE to select HDMI VBT output for it. BUG=b:186393848 BRANCH=dedede TEST=Build and boot to OS check HDMI output works. Change-Id: Ibf34cce1e3cbfce8a71dce880c50f85db9295b1e Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54645 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-05-21mb/google/dedede: Add DB_PORTS FW_CONFIG in devicetreeTony Huang
DB_PORTS_1C_1A_LTE 6 DB_PORTS_1C 7 DB_PORTS_1A_HDMI_LTE 8 BUG=b:186393848 BRANCH=dedede TEST=build pass Change-Id: I8632960d7e538402bf033d07402116dac848f5ac Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54644 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-05-21mb/google/mancomb: Enable some PCIe power saving featuresMatt Papageorge
Enable ASPM, Common Clock and Clock Power Managment. Accomplish this by adding the options in the platform Kconfig as well as dxio descriptors. BUG=b:187743927 TEST=Boot to ChromeOS and see ASPM, CC and Clock PM enabled with lspci Change-Id: I9d6e606763798afc6b797d7d24ee7cae09f9e33f Signed-off-by: Matt Papageorge <matthewpapa07@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54681 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-21mb/google/guybrush: Enable some PCIe power saving featuresMatt Papageorge
Enable ASPM, Common Clock and Clock Power Managment. Accomplish this by adding the options in the platform Kconfig as well as dxio descriptors. BUG=b:187743927 TEST=Boot to ChromeOS and see ASPM, CC and Clock PM enabled with lspci Change-Id: Iefc4b5b489cb8caf59f21dd4333d7af66ba47c32 Signed-off-by: Matt Papageorge <matthewpapa07@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54282 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-20mb/google/puff/var/dooly: Add gpio_keys for mic mute switchBen Zhang
UI monitors this input event and sends global mic mute command to CRAS when the physical switch is toggled. BUG=b:184593945 BRANCH=puff TEST=build image and verify with evtest on DUT. Apply crrev.com/c/2870806 with chrome cmdline flag and verify global mute is triggered. Verify sequences of switch toggle and suspend/resume. Change-Id: Id89947885fdd96c5b5d598bda6db127daf298dc3 Signed-off-by: Ben Zhang <benzh@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54333 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-20mb/google/mancomb: Enable GFX HDA deviceIvy Jian
Enable Display Controller Engine Audio endpoint to enable HDMI audio. BUG=b:186479763 TEST=Build and boot to OS in mancomb. Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Change-Id: I47cf9a9dc73fd47e390b079bb9eaa14dc364404a Reviewed-on: https://review.coreboot.org/c/coreboot/+/54609 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-05-20mb/google/guybrush: Add SoC thermal zoneRaul E Rangel
The time constant values were taken from the zork thermal.asl. BUG=b:186166365 TEST=Boot guybrush to OS and verify logs look correct thermal-0294 thermal_trips_update : Found critical threshold [3641] thermal-0321 thermal_trips_update : No hot threshold thermal-0200 thermal_get_temperatur: Temperature is 3060 dK thermal-0219 thermal_get_polling_fr: Polling frequency is 100 dS thermal-0200 thermal_get_temperatur: Temperature is 3060 dK thermal LNXTHERM:00: registered as thermal_zone0 ACPI: Thermal Zone [TM00] (33 C) thermal-0200 thermal_get_temperatur: Temperature is 3070 dK Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Iaeed75bdaa16b117d0fa7144ede98db1388f74f3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54134 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-05-20mb/google/kukui: Add rt1015 support for katsuSunway
Modify the value of "SPEAKER_GPIO_NAME" in katsu as rt1015p sdb BUG=None BRANCH=kukui TEST=Speaker can work normally in katsu during firmware stage Signed-off-by: Sunway <lisunwei@huaqin.corp-partner.google.com> Change-Id: Ib3672383ab34bb07b4e5eb7f7e8b4549e13c67b6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54642 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-20mb/google/sarien/var/sarien/hda_verb: Indent unindented commentsPaul Menzel
Change-Id: I2d08fa7506c6230491273f57ee0116927b29abe3 Fixes: 95370e1f ("mb/google/sarien: Add HD Audio verb table") Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54591 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-20mb/google/drallion/var/drallion/hda_verb: Correct codec name in commentPaul Menzel
Correct the Realtek ALC3254 codec name in the comment. The name is used in the original commit message, and is also present in the Linux kernel (`sound/pci/hda/patch_realtek.c`). The file was an exact copy of `src/mainboard/google/sarien/variants/arcada/include/variant/hda_verb.h` added in commit 95370e1f (mb/google/sarien: Add HD Audio verb table). Change-Id: I43cd73a14e07eb4518e3d44b6f81dff5016da721 Fixes: e3443d87 ("mb/google/drallion: Add new mainboard") Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54590 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-20mb/google/sarien/var/arcada/hda_verb: Correct codec name in commentPaul Menzel
Correct the Realtek ALC3254 codec name in the comment. The name is used in the original commit message, and is also present in the Linux kernel (`sound/pci/hda/patch_realtek.c`). Change-Id: Id8a099297bd8bcebf9734e1beee2449fdcca75c5 Fixes: 95370e1f ("mb/google/sarien: Add HD Audio verb table") Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54589 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-20mb/google/mancomb: Enable AMD I2S Machine DriverIvy Jian
Enable AMD I2S machine driver and configure the devicetree with HID information so that the machine driver ACPI objects can be passed to the kernel. Also configure Audio Co-processor(ACP) to operate in I2S TDM mode. BUG=b:187860242 TEST=Build and boot to OS in Guybrush. Ensure that the ACPD device is enabled in the appropriate scope in SSDT. Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Change-Id: I528f90d81a418236e512a1e0840ff44c3a3a983e Reviewed-on: https://review.coreboot.org/c/coreboot/+/54549 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-05-20baytrail: Factor out INT15 handlerAngel Pons
The handler is the same on all Bay Trail mainboards. Factor it out. Change-Id: Ia1b6faaca4792cda5f14948d23498182bf4bb2c3 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54415 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com> Reviewed-by: Máté Kukri <kukri.mate@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-20mb/google/dedede: move discrete TPM in overridetree for lalalaAaron Durbin
Move discrete TPM in the devicetree to avoid emitting the following message: "Using default TPM ACPI path: '\_SB_.PCI0.LPCB'" There is no corresonding ACPI device for 1f.5 PCI device. Therefore, move the discrete TPM to a device that has the corresponding ACPI device node. Functionality should remain the same. BUG=b:187518267 Change-Id: Ie9ec70336d5651c87f06f8b357abd1bfdb1cc06b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54634 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Aseda Aboagye <aaboagye@google.com>
2021-05-19herobrine: Enable macronix SPI configShaik Sajida Bhanu
Enable macronix SPI config on herobrine board. BUG=b:182963902 Change-Id: I505ee95d9f2ca16baf244135b3e2e8fe72f93491 Signed-off-by: Shaik Sajida Bhanu <sbhanu@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50583 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-05-19mb/google/brya/brya0: Manually probe fw_config for DB_LTETim Wawrzynczak
In order to use the USB WWAN module in USB mode (as opposed to PCIe), the PCIe RP must be turned off at the FSP level. The `probe` statement in the devicetree unfortunately takes effect too late, because the UPDs for disabling/enabling PCIE RP belong to FSP-M (romstage), whereas fw_config probing for devicetree is done in ramstage. Add a new variant-specific file which will handle manually setting the UPD based on FW_CONFIG instead. BUG=b:180166408 TEST=set CBI FW_CONFIG field to LTE_USB, see message in console, set field to LTE_PCIE, do not see message in console. Change-Id: Ica2f64ec99fa547e233012dc201577a14f6aa7d7 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54633 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-18mb/google/volteer: Update mainboard propertiesJohn Zhao
This changes updates mainboard properties by adding DFP number, PLD and power_gpio for each DFP. BUG=b:186521258 TEST=Validated Retimer firmware upgrade along with upstream kernel under no device attached scenario. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I18f29ce5f8450a8b0f8208a60b8b607f9f0d8817 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52714 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-18mb/google/volteer: Remove power_gpio from baseboardJohn Zhao
Along with upstream kernel for Retimer firmware update, coreboot defines power control for each DFP respectively under host router. This change removes the power_gpio from baseboard. Individual DFPx power_gpio will be added once the dependent definition is complete. BUG=b:186521258 TEST=Build image successfully. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: Iec2437ab20d283d080752a80aa4514aa9af6897e Reviewed-on: https://review.coreboot.org/c/coreboot/+/52711 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-18mb/google/brya: Disable dynamic GPIO PM for community 3Maulik V Vaghela
We recently added GPIO definition for PCIE vGPIO for Alder Lake. We also need to disable GPIO dynamic PM for this community which is already done for other communities as well. BUG=b:188392183 BRANCH=None TEST=Code compiles and Check if dynamic PM for GPIO COMM3 is also disabled Change-Id: I2f8645b8f4a9995e727a7623af97531c5de52892 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54383 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-18mainboard: Use decimal for `device lapic 0x0 on`Angel Pons
Most boards use `device lapic 0 on` with zero written in decimal. For the sake of consistency, update the remaining boards to follow suit. Change-Id: I1d3b1ac107e33aae11189cdd5e719b8e48b10f08 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54359 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-05-18mb/google/dedede: To support ELAN Touchpad device on I2C0Alex1 Kao
Add ELAN Touchpad device under I2C0 BUG=b:188373661 BRANCH=dedede TEST=emerge-dedede coreboot Signed-off-by: Alex1 Kao <alex1_kao@pegatron.corp-partner.google.com> Change-Id: I15b9cb0d0276b5e2dd06694530cc35e5643efb9d Reviewed-on: https://review.coreboot.org/c/coreboot/+/52936 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Kirk Wang <kirk_wang@pegatron.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-18mb/google/brya: Enable HECI1 communicationSridhar Siricilla
The patch enables HECI1 interface to allow OS applications to communicate with CSE. TEST=Verify PCI device 0:16.0 exposed in the lspci output Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I73acdd99788f9b60b7bcea372145e9694a124174 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54210 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-18mb/google/dedede/var/cret: Enable/disable LTE function based on FW_CONFIGDtrain Hsu
Enable/disable LTE function based on LTE bit of FW_CONFIG. The LTE function settings are included GPIO settings, USB port settings and power off sequence. BUG=b:187797408 BRANCH=dedede TEST=Build and test the change on cret. Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: Ib926e99aaf9df433a7cff71180ee55431d69f718 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54057 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-05-18mb/google/cherry: Pass reset gpio parameter to BL31Yidi Lin
To support gpio reset SoC, we need to pass the reset gpio parameter to BL31. TEST=execute `echo b > /proc/sysrq-trigger` to reboot system Change-Id: I1a55216c0d5a00bbdb373d931bd50ebe7ca5694f Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54013 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-05-16mb/google/mancomb: enable DDI0-DP portIvy Jian
Configure DDI-0 connector type to DP. BUG=b:187856682 TEST=Build and boot into OS Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Change-Id: Ic8af14509b0d246c5c2da6e1a48991384471e69f Reviewed-on: https://review.coreboot.org/c/coreboot/+/54297 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-05-14mb/google/volteer: Configure TCSS OC pinsNick Vaccaro
TCSS OC pins have not been correctly configured for volteer. This patch fills the value from devicetree to correct the OC pins mapping. BUG=b:184660529 BRANCH=None TEST="emerge-volteer coreboot chromeos-bootimage", flash volteer2 and verify CpuUsb3OverCurrentPin UPDs get set correctly. Change-Id: I12da755a1d3b9ec3ed0a2dbfb0782313dd49c7e9 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54076 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-14mb/google/cherry: Add DRAM calibration supportRex-BC Chen
Initialize and calibrate DRAM in romstage. Signed-off-by: Ryan Chuang <ryan.chuang@mediatek.com> Change-Id: Ib7677baef126ee60bf35da3a4eaf720eaa118a27 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54269 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2021-05-14mb/google/dedede/var/boten: Modify DPTF parametersStanley Wu
DPTF parameters from thermal team. 1. Modify TSR1 sensor as charge sensor. 2. Modify P-state parameter BUG=b:180641150 BRANCH=dedede TEST=build and verified by thermal team. Change-Id: I43002db61de650d29cd85944a4eaea1b2f99aec4 Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52755 Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-14mb/google/zork: update DRAM table for berknip/dirinboz/gumbozKevin Chiu
Add Samsung DDR4 memory part K4AAG165WB-BCWE 16Gb index was generated by gen_part_id BUG=b:180986354 TEST=none Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: I94b950b51b41767676ab3ddf89e88860c42f5f1d Reviewed-on: https://review.coreboot.org/c/coreboot/+/54250 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2021-05-14mb/google/volteer/var/volteer: add specific wifi SAR for voltaSheng-Liang Pan
volta will use different wifi SAR from voxel. Using clamshell mode of fw config to decide to load volta wifi sar. BUG=b:184820057 TEST=build and verify wifi power as expect. Cq-Depend: chrome-internal:3824093 Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: I000aefca63346c70556688f232ca54360b3badef Reviewed-on: https://review.coreboot.org/c/coreboot/+/54051 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-14mb/google/brya: Use FW_CONFIG LTE_PCIE to turn on/off the PCIE6Eric Lai
PCIE6 only needed when use the PCIE LTE. BUG=b:180166408 BRANCH=none TEST=FM350 can/can't be detected when enable/disable this config. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I9dce05fdb6eb956a054d3815ff706b94f0d3fc37 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54173 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-14mb/google/brya: Add the first FW_CONFIG fields to brya0Tim Wawrzynczak
1) USB sub-board 2) SD sub-board 3) GSC 4) Keyboard backlight 5) Audio sub-board 6) LTE module Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I74ca5ab5366a17e9e1784ec872b9cd77f8663c7f Reviewed-on: https://review.coreboot.org/c/coreboot/+/54097 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-14mb/google/mancomb: Update HUB_RST_L setting in GPIOIvy Jian
Configure USB HUB_RESET_L gpio to high. BUG=b:187485847 TEST=Build and boot from USB to OS, check the USB function. Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Change-Id: I94e4806c7463030df31f8d819510f9533a622f2a Reviewed-on: https://review.coreboot.org/c/coreboot/+/54078 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-05-14mb/google/guybrush,mancomb: select GOOGLE_SMBIOS_MAINBOARD_VERSIONIvy Jian
Select GOOGLE_SMBIOS_MAINBOARD_VERSION allows querying board revision from the EC. BUG=b:187904819 TEST=1. emerge-guybrush coreboot chromeos-bootimage 2. flash the image to the device and check board rev by using command `dmidecode -t 1 | grep Version` Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Change-Id: I48dc83d85cfc49e2e4155e389814fce08693c4bd Reviewed-on: https://review.coreboot.org/c/coreboot/+/54084 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Peers <epeers@google.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-05-14cbfs: Increase mcache size defaultsJulius Werner
The CBFS mcache size default was eyeballed to what should be "hopefully enough" for most users, but some recent Chrome OS devices have already hit the limit. Since most current (and probably all future) x86 chipsets likely have the CAR space to spare, let's just double the size default for all supporting chipsets right now so that we hopefully won't run into these issues again any time soon. The CBFS_MCACHE_RW_PERCENTAGE default for CHROMEOS was set to 25 under the assumption that Chrome OS images have historically always had a lot more files in their RO CBFS than the RW (because l10n assets were only in RO). Unfortunately, this has recently changed with the introduction of updateable assets. While hopefully not that many boards will need these, the whole idea is that you won't know whether you need them yet at the time the RO image is frozen, and mcache layout parameters cannot be changed in an RW update. So better to use the normal 50/50 split on Chrome OS devices going forward so we are prepared for the eventuality of needing RW assets again. The RW percentage should really also be menuconfig-controllable, because this is something the user may want to change on the fly depending on their payload requirements. Move the option to the vboot Kconfigs because it also kinda belongs there anyway and this makes it fit in better in menuconfig. (I haven't made the mcache size menuconfig-controllable because if anyone needs to increase this, they can just override the default in the chipset Kconfig for everyone using that chipset, under the assumption that all boards of that chipset have the same amount of available CAR space and there's no reason not to use up the available space. This seems more in line with how this would work on non-x86 platforms that define this directly in their memlayout.ld.) Also add explicit warnings to both options that they mustn't be changed in an RW update to an older RO image. BUG=b:187561710 Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I046ae18c9db9a5d682384edde303c07e0be9d790 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54146 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2021-05-13mb/google/brya: enable DPTF functionality for bryaSumeet R Pawnikar
Enable DPTF functionality for Alder Lake based brya BRANCH=None BUG=b:188028732 TEST=Built and tested on brya board Change-Id: I33266c85aa30869466034ccbab04a3c7820ae2b0 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52859 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-13mb/google/zork/var/shuboz: update USB OC pin mappingKane Chen
modify USB OC pin setting for Shuboz/Jelboz/Jelboz360 Shuboz/Jelboz: usb_port_overcurrent_pin[0] = "USB_OC_PIN_0" # USB C0 usb_port_overcurrent_pin[1] = "USB_OC_PIN_0" # USB A0 usb_port_overcurrent_pin[2] = "USB_OC_PIN_1" # USB A1 usb_port_overcurrent_pin[3] = "USB_OC_PIN_1" # USB C1 Jelboz360: usb_port_overcurrent_pin[0] = "USB_OC_PIN_0" # USB C0 usb_port_overcurrent_pin[1] = "USB_OC_PIN_0" # USB A0 usb_port_overcurrent_pin[2] = "USB_OC_NONE" # NONE usb_port_overcurrent_pin[3] = "USB_OC_PIN_1" # USB C1 BUG=b:182879559 BRANCH=zork TEST=emerge-zork coreboot, validate the OC mapping. Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: Icc1fa090109e6be54e2a5f49e364f5502f53aca2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51523 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2021-05-13mb/google/volteer/variants/copano: Redefine GPIO_EC_IN_RW to GPP_F17Hao Chou
Redefine GPIO_EC_IN_RW to GPP_F17 Signed-off-by: Hao Chou <hao_chou@pegatron.corp-partner.google.com> Change-Id: I428eb8db34c80d38899a2b823ec7193de4a8f5e4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54085 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wayne3 Wang <wayne3_wang@pegatron.corp-partner.google.com> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-13mb/google/dedede/var/magolor: Select touchscreen based on SSFC in FW_CONFIGDavid Wu
Select touchscreen(s) based on touchscreen source provisioned in SSFC of CBI (higher 32 bits of FW_CONFIG in coreboot). The reason is to avoid to enable multiple touchscreen ICs with the same slave address. BUG=b:186609348 TEST=build and boot to OS. Change-Id: I087ea677a8865fc8c5b3f7c9773bd7f97924dbb3 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52851 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Marco Chen <marcochen@google.com>
2021-05-13soc/mediatek/mt8195: Enable SCP SRAMRex-BC Chen
Enable SCP SRAM to allow module in SCPSYS to access DRAM. TEST=AFE acess DRAM successfully Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I40862f8d74e5aa17361f1c91ea31a10b0a4ffb31 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54014 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-12mb/google/dedede/var/metaknight: Update DPTF parametersDavid Wu
Remove TSR2 and use DPTF parameters from internal thermal team. BUG=b:175938681 TEST=build and boot to OS. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: If0ec1ec48b8971efe87f1f8d10332a9c16352122 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54046 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raymond Wong <wongraymond@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Evan Green <evgreen@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2021-05-12mb/google/guybrush: Configure wake resource for WiFiKarthikeyan Ramasubramanian
In order to support wake on WLAN events, configure the wake resource. BUG=b:186011392 TEST=Build and boot to OS in guybrush. Ensure that WiFi power resource is added to SSDT. Device (\_SB.PCI0.GP20.WF00) { Name (_UID, 0x38B82CBC) // _UID: Unique ID Name (_DDN, "WIFI Device") // _DDN: DOS Device Name Name (_ADR, 0x0000000000000000) // _ADR: Address } Scope (\_SB.PCI0.GP20.WF00) { Name (_PRW, Package (0x02) // _PRW: Power Resources for Wake { 0x08, 0x03 }) } Change-Id: Ic238d9606aea20c058e9b47093693f10b14e6288 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52908 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2021-05-12mb/google/guybrush,mancomb: Adjust GBB size to 12KBMartin Roth
The 448KB size of the GBB is larger than is needed, so adjust it down to the minimum size needed. BUG=b:186761897 TEST=Build & Boot guybrush Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I7a24945cd9ecc8872871f57b09ca71fc40e92473 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52764 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-05-12mb/google/octopus/var/phaser: add audio codec into SSFC support for PhaserKevin Chang
Add audio codec module RT5682 in project and define GPIO_137 in the override_table for SSFC framework to adjust IRQ configuration. BUG=b:182221327 BRANCH=octopus TEST=adjust SSFC value of CBI to select RT5682I or DA7219 then check whether device tree is updated correspondingly by disabling unselected one. Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Change-Id: I202f71f57ad2db84fb90b52f9ffd7a1fd05494a3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52878 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com>
2021-05-12mb/google/volteer: Create chronicler variantSheng-Liang Pan
Create the chronicler variant of the volteer reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:187318819 BRANCH=None TEST=util/abuild/abuild -p none -t google/volteer -x -a make sure the build includes GOOGLE_CHRONICLER Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: Iebfea87b7c4cfc2a83e88a6c479a0842774ae018 Reviewed-on: https://review.coreboot.org/c/coreboot/+/53907 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: YH Lin <yueherngl@google.com>
2021-05-12mb/google/octopus/var/fleex: Add cs42l42 HSBIAS settingIan Feng
Disable HSBIAS sense setting. BUG=b:184103445 TEST=boot to check cs42l42 is functional. Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: I12c0e0a0f7490d35d36fe8ccbc940f29e1bb7976 Reviewed-on: https://review.coreboot.org/c/coreboot/+/53901 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Vitaly Rodionov <vitaly.rodionov@cirrus.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-05-12mb/google/dedede/var/boten: Probe and enable amplifier operation modeStanley Wu
Probe the fw_config for RT1015 speaker amplifier operation mode and enable it accordingly in the device tree. BUG=b:180570923 BRANCH=dedede TEST=ALC1015Q-VB drive speaker OK Change-Id: I756bfa6f604ed320de9a515821979aa95c869ebf Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52319 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-05-12mb/google/dedede: Add GPIO and SPD for pirika supportKirk Wang
Add support for GPIO and SPD driver for pirika BUG=b:184157747 BRANCH=dedede TEST=emerge-dedede coreboot Signed-off-by: Kirk Wang <kirk_wang@pegatron.corp-partner.google.com> Change-Id: Id367a83b04aad62b7deabae99b3f91905a2fc46c Reviewed-on: https://review.coreboot.org/c/coreboot/+/52923 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alex1 Kao <alex1_kao@pegatron.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-05-11mb/google/dedede/var/metaknight: Update LTE USB port configurationKarthikeyan Ramasubramanian
Update LTE USB port configuration at run-time after probing the firmware config. By default the concerned USB port takes the Type-A port configuration. BUG=b:186380807 BRANCH=dedede TEST=Build and boot to OS in metaknight Change-Id: I5ad5a1670adef54075923cf912fb41a1ce776155 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52960 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-by: Evan Green <evgreen@chromium.org> Reviewed-by: Raymond Wong <wongraymond@google.com>
2021-05-11mb/google/dedede: Add a variant callback to update devicetree configDavid Wu
This callback is required to update the devicetree config at run-time after probing the firmware config. BUG=b:186380807 BRANCH=dedede TEST=Build and boot to OS in metaknight. Change-Id: I857211bfc4beb36ab225f3786c1707336a34aae9 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52887 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Evan Green <evgreen@chromium.org> Reviewed-by: Raymond Wong <wongraymond@google.com>
2021-05-11mb/google/kukui: Add discrete EMCP LPDDR4X table for Kakadu/KatsuSunway
Add EMCP LPDDR4X DDR FEPRF6432-58A1930 for ram id 9. BUG=b:186141919 BRANCH=kukui TEST=New Emcp can boot normally on kakadu/katsu Signed-off-by: Sunway <lisunwei@huaqin.corp-partner.google.com> Change-Id: Ieaf05a0a7b0c0671c07b0df29319ebd91fe63e57 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54009 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-10mb/google/cherry: Configure TPMYidi Lin
Change-Id: I1d6ecdb31eef65d2e96d9251348390aa8598be6c Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/53900 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-05-10mb/google/cherry: Enable Chrome ECYidi Lin
Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Change-Id: Iab3549b5c4e7d845ddd284a0df3fb448e11fbdcb Reviewed-on: https://review.coreboot.org/c/coreboot/+/53899 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-05-10mb/google/mancomb: Fix TPM setting in devicetreeIvy Jian
Fix I2C3 setting for TPM in devicetree. BUG=b:187341277 TEST=Build and boot into OS Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Change-Id: I728da76cee0c92c29df4c6ee8bfb4cd07a6366c4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/53891 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-05-10mb/google/guybrush: Enable GFX HDA deviceKarthikeyan Ramasubramanian
Enable Display Controller Engine Audio endpoint to enable HDMI audio. BUG=b:186479763 TEST=Build and boot to OS in guybrush. Change-Id: I5e35440e8e70ee125d37c7ac30c9219ec69c7c6e Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52974 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-05-10mb/google/guybrush: Enable PP5000_PENEric Peers
Everybody wants a stylish stylus. Enable the power system to it. BUG=b:186267293 TEST=connect multimeter to PP5000_PEN and see it go from 0 to 1. MAGIC! Signed-off-by: Eric Peers <epeers@google.com> Change-Id: I11d05c118ec9451d26136c320f3650c489e02c59 Reviewed-on: https://review.coreboot.org/c/coreboot/+/53943 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-05-10soc/mediatek/mt8195: Add RTC driverYuchen Huang
Both mt8192 and mt8195 use MT659P RTC. Move mt8192/rtc.c to common folder and rename to rtc_mt6359p.c. Signed-off-by: Yuchen Huang <yuchen.huang@mediatek.corp-partner.google.com> Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Change-Id: I73ea90512228a659657f2019249e7142c673e68e Reviewed-on: https://review.coreboot.org/c/coreboot/+/53897 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-10soc/mediatek/mt8195: Add clk_buf driverYuchen Huang
Both mt8192 and mt8195 use mt6359p clk_buf. But mt8195 clk_buf uses legacy co-clock mode without srclken_rc. Signed-off-by: Yuchen Huang <yuchen.huang@mediatek.corp-partner.google.com> Change-Id: Ie9ee91449a7a14e77231493f807b321b2dbaa6a6 Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/53896 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-05-10soc/mediatek/mt8195: Configure eMMC and SDCardWenbin Mei
Change-Id: I0ed82e860612e8a62f361e60d217280f775ab239 Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com> Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/53895 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-09mb/google/guybrush: Populate PIC IRQ dataRaul E Rangel
The PIC IRQs are required so we can correctly set up the PCI_INT registers. This only matters when booting in PIC mode. We don't need to set the IO-APIC registers since the linux kernel will auto-assign those to reduce conflicts. BUG=b:184766519 TEST=Boot guybrush with `pci=nomsi,noacpi amd_iommu=off noapic` and verify xhci and graphics continue to work. $ cat /proc/interrupts 12: 285064 XT-PIC nvme0q0, nvme0q1, rtw88_pci 13: 100000 XT-PIC xhci-hcd:usb1 14: 4032 XT-PIC amdgpu, xhci-hcd:usb3 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I1d66ccd08a86a64242dbc909c57ff9685828f61f Reviewed-on: https://review.coreboot.org/c/coreboot/+/52915 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-08mb/google/volteer: adjust the size for RO/RW mcacheZhuohao Lee
The mcache is overflowed in the latest build. In order to fix the mcache overflow, we increase the mcache size to 0x4000 and adjust the percentage to 50% for the ro/rw mcache. This change is for all of the volteer variants as we see many of the volteer variants which use the latest bios having the mcache overflow issue. BUG=b:187095474, b:187095765, b:187234881, b:162052593 TEST=no mcache overflow in the bios log Change-Id: If9552bc9fa5d36b1ca662c9da030ae7b137b60a8 Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/53908 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 23:49:06 +0000