Age | Commit message (Expand) | Author |
2017-04-28 | google/oak: Configure SD card detect pin with a pull-up | Julius Werner |
2017-04-27 | mb/google/eve: switch touchpad devicetree to i2c-hid and cros_ec i2c device | Wei-Ning Huang |
2017-04-27 | google/poppy: Enable PD MCU device | Shamile Khan |
2017-04-27 | google/fizz: Configure HDMI HPD to use native function | Shelley Chen |
2017-04-27 | google/fizz: Enable SATA on port 1 | Shelley Chen |
2017-04-25 | google/gru: change the sd power sequence | Caesar Wang |
2017-04-25 | google/oak: Enable dual DSI for rowan and the BOE 8-lane MIPI/DSI panel | Daniel Kurtz |
2017-04-25 | mediatek/mt8173: Add support for Dual DSI output | Jitao Shi |
2017-04-25 | google/oak: Use edid_set_framebuffer_bits_per_pixel | Daniel Kurtz |
2017-04-24 | google/oak: Support cr50 over I2C on rowan | Vadim Bendebury |
2017-04-24 | mainboard/google/reef: Remove DRIVER_TPM_I2C_IRQ | Daniel Kurtz |
2017-04-24 | mainboard/google/eve: Remove DRIVER_TPM_I2C_IRQ | Daniel Kurtz |
2017-04-24 | mainboard/google/reef: Add TPM_TIS_ACPI_INTERRUPT | Daniel Kurtz |
2017-04-24 | mainboard/google/eve: Add TPM_TIS_ACPI_INTERRUPT | Daniel Kurtz |
2017-04-24 | mainboard/google/poppy: use intel common tis_plat_irq_status() | Aaron Durbin |
2017-04-24 | Kconfig: provide MAINBOARD_HAS_TPM_CR50 option | Aaron Durbin |
2017-04-24 | mb/google/fizz: Set lid status as open | Naresh G Solanki |
2017-04-24 | mb/google/fizz: Configure PCI root port | Naresh G Solanki |
2017-04-24 | google/fizz: Configure memory | Shelley Chen |
2017-04-24 | *.asl: Remove obsolete reference to TPM ASL file | Patrick Rudolph |
2017-04-20 | mainboard/google/eve: Set touchpad IRQ to level triggered | Duncan Laurie |
2017-04-19 | google/gru: change kevin boot-time center logic voltage to 925mV | Douglas Anderson |
2017-04-19 | google/gru: change center logic voltage to 900mV | Derek Basehore |
2017-04-19 | mainboard/google/poppy/variants/soraka: add soraka board | YH Lin |
2017-04-19 | mainboard/google/poppy: Provide nhlt variant API | Furquan Shaikh |
2017-04-19 | mainboard/google/poppy: Provide memory configuration variant API | Furquan Shaikh |
2017-04-19 | mainboard/google/poppy: Provide cros_gpio variant API | Furquan Shaikh |
2017-04-19 | mainboard/google/poppy: Add variant API for board_id and gpio | Furquan Shaikh |
2017-04-19 | mainboard/google/poppy: Provide baseboard and variant concepts | Furquan Shaikh |
2017-04-19 | mainboard/google/poppy: Prepare sharing directory for variants | Furquan Shaikh |
2017-04-19 | mb/google/poppy: Add camera support | V Sowmya |
2017-04-19 | mb/google/poppy: Add Image Processing Unit ASL | Sowmya |
2017-04-18 | mainboard/google/poppy: Clean up gpio.h file | Furquan Shaikh |
2017-04-18 | mainboard/google/poppy: Enable deep S3 in DC mode | Furquan Shaikh |
2017-04-15 | google/slippy: fix internal mic for falco/wolf variants | Matt DeVillier |
2017-04-15 | mainboard/google/eve: Remove 'probed' setting from rt5663 codec | Duncan Laurie |
2017-04-14 | google/slippy: clean up NGI and move to libgfxinit | Matt DeVillier |
2017-04-14 | mainboard/google/eve: Remove ACPI ALS device | Duncan Laurie |
2017-04-14 | mainboard/google/eve: Set UART0 to skip initialization in FSP | Duncan Laurie |
2017-04-14 | mainboard/google/eve: Enable internal pull-down on USB_C{0,1}_DP_HPD | Duncan Laurie |
2017-04-13 | mainboard/google/reef: Configure sdcard card detect (CD) pin GPIO_177 | Venkateswarlu Vinjamuri |
2017-04-13 | mainboard/google/snappy: Increase weida touchscreen reset delay | Wisley Chen |
2017-04-13 | google/eve: Disable Deep S3 in AC mode | Duncan Laurie |
2017-04-13 | google/eve: Enable WiFi SAR feature | Duncan Laurie |
2017-04-13 | soc/intel/skylake: Split AC/DC settings for Deep Sx config | Duncan Laurie |
2017-04-13 | mainboard/google/poppy: Enable internal pull-down on USB_C{0,1}_DP_HPD | Furquan Shaikh |
2017-04-13 | mainboard/google/poppy: Add support for cr50 SPI TPM | Furquan Shaikh |
2017-04-11 | scarlet/gru: skip display because mipi driver not ready | Shunqian Zheng |
2017-04-11 | google/eve: Limit memory SKU 5 to 1600MHz | Duncan Laurie |
2017-04-10 | google/eve: Update I2C bus timing | Duncan Laurie |
2017-04-08 | 3rdparty/libgfxinit: Update submodule pointer | Nico Huber |
2017-04-06 | gru: Initialize I2C bus for ARC2C0608 | Philip Chen |
2017-04-05 | mainboard/google/reef: increase trackpad data hold time | Aaron Durbin |
2017-04-05 | mainboard/google/poppy: Change SD card detect to GPP_E15 | Furquan Shaikh |
2017-03-29 | mainboard/google/reef: turn off DMIC_CLK_B1 in S0ix | Sathyanarayana Nujella |
2017-03-28 | vboot: Move remaining features out of vendorcode/google/chromeos | Julius Werner |
2017-03-28 | chromeos / broadwell / jecht: Make save_chromeos_gpios() jecht-specific | Julius Werner |
2017-03-28 | vboot: Assume EC_SOFTWARE_SYNC and VIRTUAL_DEV_SWITCH by default | Julius Werner |
2017-03-28 | vboot: Remove VBOOT_DYNAMIC_WORK_BUFFER Kconfig option | Julius Werner |
2017-03-28 | vboot: Select SoC-specific configuration for all Chrome OS boards | Julius Werner |
2017-03-27 | ec: Use EC_ENABLE_LID_SWITCH for all mainboards with LID using chromeec | Furquan Shaikh |
2017-03-27 | mainboard/google/rambi: Move SIO_EC_ENABLE_PS2K to onboard.h | Furquan Shaikh |
2017-03-24 | mainboard/google/snappy: Update DPTF settings | Wisley Chen |
2017-03-23 | google/fizz: Update device tree from schematic | Shelley Chen |
2017-03-23 | google/fizz: Transfer gpio from schematic | Shelley Chen |
2017-03-23 | google/fizz: Remove poppy-specific configs | Shelley Chen |
2017-03-23 | google/fizz: Add new board | Shelley Chen |
2017-03-22 | mainboard/google/reef: add nasher variant | YH Lin |
2017-03-21 | google/pyro: Update DPTF settings | Kevin Chiu |
2017-03-21 | mainboard/google/poppy: Use sideband IRQ for SD Card Detect | Furquan Shaikh |
2017-03-21 | google/sand: Add Raydium touchscreen device | Katherine Hsieh |
2017-03-20 | mainboard/google/snappy: Update _hid name for weida touchscreen | Wisley Chen |
2017-03-19 | mb/google/reef: Remove CPU throttling effect of the charger sensor | Sumeet Pawnikar |
2017-03-17 | google/veyron: Clean out unused board variants | Julius Werner |
2017-03-17 | google/veyron: Work around RAM code strapping error | Julius Werner |
2017-03-17 | mainboard/google/poppy: Enable EC SW sync | Furquan Shaikh |
2017-03-16 | google/poppy: Use rt5663 interrupt as GpioInt instead of PIRQ | Rizwan Qureshi |
2017-03-16 | google/eve: Use rt5663 interrupt as GpioInt instead of PIRQ | Duncan Laurie |
2017-03-16 | mainboard/google/reef: Increase PL2 Max to 15W | Tim Chen |
2017-03-15 | google/eve: Update MCU GPIOs configuration | Vincent Palatin |
2017-03-15 | google/eve: Apply default AC/DC loadline settings | Duncan Laurie |
2017-03-15 | intel/skylake: Fix bug in VR configuration with FSP 2.0 | Duncan Laurie |
2017-03-15 | google/eve: Use rt5514 instead of 4ch DMIC | Duncan Laurie |
2017-03-15 | mainboard/google/reef: Add FPF_STATUS FMAP region | Andrey Petrov |
2017-03-14 | google/sand: Remove support for tablet mode switch | Katherine Hsieh |
2017-03-12 | google/poppy: Enable internal pull-up on PWRBTN# | Shobhit Srivastava |
2017-03-10 | google/sand: Add devicetree.cb file for sand | Katherine Hsieh |
2017-03-10 | mainboard/google/reef: Modify TCPU, TSR2 and TRT table | Tim Chen |
2017-03-10 | mainboard/google/reef: Configure SDCARD card detect pin | Venkateswarlu Vinjamuri |
2017-03-09 | drivers/spi/tpm: provide Kconfig to indicate CR50 usage | Aaron Durbin |
2017-03-09 | mainboard/google/reef: increase pre cbmem console size for Chrome OS | Aaron Durbin |
2017-03-09 | google/poppy: Configure SRCCLKREQ4 as No Connect | Naresh G Solanki |
2017-03-09 | google/pyro: Update DPTF settings | Kevin Chiu |
2017-03-09 | mainboard/google/poppy: Enable cros_ec_keyb device | Furquan Shaikh |
2017-03-08 | mainboard/google/poppy: Add EC_HOST_EVENT_MODE_CHANGE to wakeup source | Furquan Shaikh |
2017-03-08 | google/eve: Configure GPIOs for new board | Duncan Laurie |
2017-03-08 | mainboard/google/snappy: Override USB2 phy setting | Wisley Chen |
2017-03-07 | google/gru: add MAX_SDRAM_FREQ config to choose max ddr freq | Shunqian Zheng |
2017-03-07 | google/veyron: add K4B4G1646E-BYK0 ddr with ramid 000Z | Shunqian Zheng |
2017-03-07 | google/veyron_*: Add new Micron and Hynix modules | David Hendricks |