summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Expand)Author
2018-10-03google/kahlee: Enable IOMMU deviceMarc Jones
2018-10-01mb/google/octopus: Operate touchpad I2C CLK in specChris Zhou
2018-10-01google/kahlee: Run FCH PTS and WAK methodsMarshall Dawson
2018-09-28mainboard/google/poppy/variants/rammus: Modify VR settingstatham_chu
2018-09-28soc/intel/cannonlake: Update UPD from device switchLijian Zhao
2018-09-28src/*: normalize Google copyright headersPatrick Georgi
2018-09-26mb/google/poppy/variants/nocturne: Update PowerLimit1 maximum valueSumeet Pawnikar
2018-09-26mb/google/poppy/variants/nocturne: Add tdp_pl1_override valueSumeet Pawnikar
2018-09-26mb/google/poppy/variants/nocturne: Update DPTF settingsPuthikorn Voravootivat
2018-09-26cheza: Wrap FMAP sections with calibration data in RO_PRESERVE sectionJulius Werner
2018-09-26mb/google/octopus: Touchpad I2C CLK (405.25KHz)over spec(＜400KHz)peichao.wang
2018-09-26Revert "mb/google/poppy/variants/nautilus: Set grip sensor threshold"Seunghwan Kim
2018-09-26mb/google/octopus: Close unused I2C bus 7 include SCL and SDA for PhaserPeichao Wang
2018-09-25mainboard/google/kahlee: Only read a single vendor from oem.binMartin Roth
2018-09-25mb/google/kahlee/variants/liara: Disable NbP-state on LiaraAmanda Huang
2018-09-24soc/amd/stoneyridge/romstage.c: Move STAPM code to SOC specificRichard Spiegel
2018-09-21mb/google/octopus: Create ampton variantJustin TerAvest
2018-09-21mb/google/poppy/variants/rammus: Disable command TriState for rammusmarxwang
2018-09-21google/kukui: Set up EC_IN_RW GPIO for ChromeOSTristan Shieh
2018-09-21mb/google/poppy/variant/nocturne: set DMIC1 to NCNick Vaccaro
2018-09-21mainboard/google/kahlee: allow oem.bin file to update smbiosMartin Roth
2018-09-21mb/google/octopus/variants/fleex: Update DPTF parametersSumeet Pawnikar
2018-09-20mb/google/zoombini: Use Chrome EC BOARDID definitionKarthikeyan Ramasubramanian
2018-09-20ec/google/chromeec: Update google_chromeec_get_board_version prototypeKarthikeyan Ramasubramanian
2018-09-20mb/google/poppy/variants/nocturne: Update DPTF settingsPuthikorn Voravootivat
2018-09-20mb/google/octopus: Enable DRAM_PART_NUM_IN_CBI feature for meepWisley Chen
2018-09-18mb/google/kahlee/variants/careena/devicetree.cb: Set STAPM valuesRichard Spiegel
2018-09-18mainboard/google/kahlee: Set EMMC reset pin to output lowMartin Roth
2018-09-18mainboard/google/kahlee: Don't set global subsystem IDsMartin Roth
2018-09-17mb/google/kahlee/variants/baseboard: Set STAPM percentageRichard Spiegel
2018-09-17google/buddy: Add board as variant of google/auronMatt DeVillier
2018-09-17google/auron: Clean up variant-specific romstage codeMatt DeVillier
2018-09-16google/kukui: Configure EMMCTristan Shieh
2018-09-16mb/google/poppy/variants/rammus: fix S0ix entering issueZhuohao Lee
2018-09-16google/kukui: Notify EC that AP is in S0Hung-Te Lin
2018-09-16mb/google/poppy: Set UPD CmdTriStateDis for AtlasCaveh Jalali
2018-09-14mb/google/octopus: Query the EC for board versionKarthikeyan Ramasubramanian
2018-09-14mb/google/octopus: fetch DRAM part number from CBI for phaser after DVT phasepeichao.wang
2018-09-12mainboards: Add SMMSTORE region in chromeos configsPatrick Georgi
2018-09-12rammus: add SPD mapping for rammus and shyvana supportkane_chen
2018-09-10mb/google/poppy/variants/nami: Add SPD for two memory partsRen Kuo
2018-09-10mainboard/google/poppy/variants/rammus: Enable DA7219marxwang
2018-09-10mb/google/poppy: Set UPD CmdTriStateDis for NocturneShaunak Saha
2018-09-09drivers/vpd: Add VPD supportPatrick Rudolph
2018-09-09mainboard/google/kahlee: Reset trackpad & touchscreenMartin Roth
2018-09-07mb/google/poppy/variants/atlas: enable NVMeCaveh Jalali
2018-09-06mb/google/octopus: Configure H1 interrupt pad using Rx level configFurquan Shaikh
2018-09-06mainboard/google/poppy/variants/rammus: Enable GSPI clock for bus 0.kane_chen
2018-09-06mb/google/poppy/variants/nocturne: Enable DMIC CLK0/DATA0Sathyanarayana Nujella
2018-09-06mb/google/poppy/variants/nautilus: Bump VCC_SA voltage offset 75mVSeunghwan Kim
2018-09-06mb/google/octopus: Enable TBMC deviceAmanda Huang
2018-09-05mainboard/google/kahlee: Enable the BCLK bufferMartin Roth
2018-09-04mb/google/poppy/variants/rammus: add sku info into smbios tableZhuohao Lee
2018-09-02mb/google/poppy/Kconfig: Fix missing device node /dev/tpm0 for H1Zhuohao Lee
2018-09-02mainboard/google/kahlee/var/liara: Enable Synaptics touchpad deviceCrystal Lin
2018-08-31google/cheza: Adjust FMAP to fit new requirementsJulius Werner
2018-08-31mb/google/kahlee/variants/liara: Update Audio/H1/TP i2c timingsChris Zhou
2018-08-30mb/google/poppy/variants/nautilus: Set grip sensor thresholdSeunghwan Kim
2018-08-30mb/google/octopus: Add missing IOstandy settings.Shamile Khan
2018-08-29mainboard/google/kahlee: Enable EC firmware update screenMartin Roth
2018-08-28mb/google/octopus/variants/meep: Add weida touchscreen supportTony Huang
2018-08-28soc/intel/cannonlake: Change LPDDR4 to MEMCFGLijian Zhao
2018-08-28google/kukui: Init SPI bus for ECTristan Shieh
2018-08-28google/kukui: Set up GPIOs for ChromeOSTristan Shieh
2018-08-28google/grunt: Reset BayHub EMMC freq to SD base CLK 50MHzKevin Chiu
2018-08-27mb/google/poppy/variants/atlas: Update DPTF parametersTodd Broch
2018-08-27mb/google/poppy/variants/nocturne: Update DPTF parametersTodd Broch
2018-08-27mb/google/octopus/variants/baseboard: Update DPTF parametersSumeet Pawnikar
2018-08-27mb/google/kahlee: Fix I2C bus 0 timing for GruntAkshu Agrawal
2018-08-27update all FADT version 3.0 to use the get tables functionMarc Jones
2018-08-27mb/google/octopus: add Digitizer and Synaptics Touchpad for bobbaPan Sheng-Liang
2018-08-23mb/google/poppy/variants/nocturne: enable "Base Attached Switch" deviceDmitry Torokhov
2018-08-23mb/google/octopus: Add null pointer checkJohn Zhao
2018-08-23mb/google/octopus/var/meep: Update GPIO config for meepWisley Chen
2018-08-22mb/google/octopus/variants/bobba: Apply new GPIO configs for bid >= 2Furquan Shaikh
2018-08-20eve: Add PL1 override to 7WLucas Chen
2018-08-20atlas: enable keyboard backlight supportCaveh Jalali
2018-08-20mb/google/poppy/variants/nocturne: enable eistMatt Delco
2018-08-20mb/google/eve: enable eistMatt Delco
2018-08-20nocturne: Enable debouncing of SX9310 CLOSE / FAR IRQsEnrico Granata
2018-08-20mb/google/octopus/variants/fleex: Increase weida touchscreen reset delayCrystal Lin
2018-08-19google/cyan: Fix ACPI resource scope for Melfas touchscreenMatt DeVillier
2018-08-17arm64: Factor out common parts of romstage execution flowJulius Werner
2018-08-17google/grunt: Update TP/TS/H1 i2c timingsKevin Chiu
2018-08-17mainboard/google/kahlee: Fix ACPI method Not Serialized errorMarc Jones
2018-08-17Nami: Disable powering off EC on cr50 updateDaisuke Nojiri
2018-08-16mb/*/*/cmos.default: Harmonise CMOS files syntaxElyes HAOUAS
2018-08-16google/grunt/aleena: Update Raydium TS device ACPI nodesTim Chen
2018-08-15mb/*/*/cmos.default: Decrease debug_level to 'Debug'Elyes HAOUAS
2018-08-15google/grunt: Remove BayHub EMMC driving strength overrideKevin Chiu
2018-08-15mb/google/poppy/variants/nocturne: remove dup'ed dptf_enableMatt Delco
2018-08-15mb/google/poppy/variants/nocturne: sx9310 to 400kbMatt Delco
2018-08-15Revert "mb/google/poppy/variants/atlas: enable camera power and release reset"Caveh Jalali
2018-08-15mb/google/atlas: Add DISPLAY_DCR_EN GPIO pinCaveh Jalali
2018-08-15mb/google/atlas: Update DPTF sensor namesCaveh Jalali
2018-08-14src: Remove duplicated 'include <device/device.h>'Elyes HAOUAS
2018-08-14mb/google/poppy/variants/nocturne: Update PL1/PL2 for AMLRoy Mingi Park
2018-08-14mb/google/poppy/variant/nami: Add TSR2 on DPTFT.H. Lin
2018-08-14mb/google/octopus/var/bobba: Update GPIO config for bobba bid >= 1Justin TerAvest
2018-08-13mb/google/kahlee: Remove unneeded blank linePaul Menzel
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 17:36:48 +0000