summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Collapse)Author
2013-12-21FUI: Fill in link_m and link_n valuesFurquan Shaikh
... based on the EDID detailed timing values for pixel_clock and link_clock. Two undocumented registers 0x6f040 and 0x6f044 correspond to link_m and link_n respectively. Other two undocumented registers 0x6f030 and 0x6f034 correspond to data_m and data_n respectively. Calculations are based on the intel_link_compute_m_n from linux kernel. Currently, the value for 0x6f030 does not come up right with our calculations. Hence, set to hard-coded value. Change-Id: I40ff411729d0a61759164c3c1098504973f9cf5e Reviewed-on: https://gerrit.chromium.org/gerrit/62915 Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> Commit-Queue: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/4381 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21Slippy: remove unneeded code in i915io.cRonald G. Minnich
This code is left over from what the VBIOS did; It is redundant. Change-Id: I321c867c81ec8b4d5e10f8b51b872cecb3082d97 Signed-off-by: Ronald G. Minnich <rminnich@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/62290 Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Commit-Queue: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/4380 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21slippy/falco/peppy: Route USB to XHCI on resumeDuncan Laurie
Turn on the pei_data flag that will instruct the reference code binary to route all USB ports to the XHCI controller on resume and disable the EHCI controller(s). Change-Id: I2f2ed853a6d17f90ea524bc516f3e78079222739 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/63798 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4404 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21haswell boards: fix SATA interrupt in ACPIDuncan Laurie
SATA is routed to PIRQG which should be interrupt 22 and not interrupt 21. The kernel uses MSI with this device so this is only seen when booting with pci=nomsi Change-Id: Ic90ca2c561fc4c53ec1d395c05872222c65ff98a Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/63796 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4398 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21slippy/falco/peppy: update ACPI C-state settingsDuncan Laurie
Since these boards do not support C10 we should not bother advertising that state in the ACPI _CST. Instead use this map: ACPI(C1) = MWAIT(C1E) ACPI(C2) = MWAIT(C3) ACPI(C3) = MWAIT(C7S) Change-Id: I37eb02bf9555c74e957316a1ba9778eb2b6ee128 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/62898 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/4377 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21lynxpoint me: add support for mbp clear wait in finalize stepDuncan Laurie
The management engine is slow, requiring at least 500ms between when the Dram Init Done message is sent (right after memory training) to when the MBP will report that it is successfully cleared and that the ME can finally be sent the EOP message. Currently this is adding 100-150ms to the boot time. If we defer waiting for the MBP Clear indicator until the finalize step we can gain back that lost time. boot on falco with SMI debugging enabled to ensure that the ME is locked down in the finalize step: Finalizing Coreboot SMI# #0 SMI_STS: PM1 APM ME: MBP cleared ME: mkhi_end_of_post ME: END OF POST message successful (0) Change-Id: Icab4c8c8e00eea67bed5e8154d91a1eb48a492d1 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/62633 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4375 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21Revert "lynxpoint: Move ME lock down to ramstage"Duncan Laurie
This reverts commit ff81f50f0e4c068b64c4a5c7f5244196ecd24965. Deferring this step until the finalize stage will allow us to defer waiting for the MBP clear indicator and speeding up the boot. Change-Id: Ib8edffd06689e72875830cd68b5aedb7ac3b0559 Reviewed-on: https://gerrit.chromium.org/gerrit/62631 Tested-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4373 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-21SLIPPY: final changes for FUIRonald G. Minnich
The intel_ddi.c change I thought should be in but I don't see it. It just adds two functions back that we need. There are two new files for slippy annotated with comments about how it needs to evolve. That said, this code has been tested on 3 different panels. Both dev and non-dev usages work. physbase initialization to static value removed. Moved spin calls to intel_dp_* Change-Id: I0480af45c21c7dedcaff7e8be729f0eb554ec78a Signed-off-by: Ronald G. Minnich <rminnich@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/61136 Commit-Queue: Ronald G. Minnich <rminnich@chromium.org> Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Tested-by: Ronald G. Minnich <rminnich@chromium.org> Reviewed-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/4370 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2013-12-21peppy: Duplicate SPD data for 2GB configurations.Shawn Nematbakhsh
Peppy SPD table has 4GB configurations followed by 2GB configurations. Current implementation does remapping to point 2GB configuration to the same SPD index as the 4GB. This is different than Falco, which simply duplicates the SPD data for all configurations. To simplify probing in mosys, copy the Falco implementation of duplicating SPD data. Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Change-Id: Idb185a437f3cf4f40d2dae1ae59c30235df8f489 Reviewed-on: https://gerrit.chromium.org/gerrit/61847 Reviewed-by: Dave Parker <dparker@chromium.org> Reviewed-by: Jay Kim <yongjaek@chromium.org> Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4369 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2013-12-21haswell boards: Use PECI temp sensor id 0Duncan Laurie
The EC temperature sensors were renumbered and now PECI is at index 0. 1) boot on falco 2) check /sys/class/thermal/thermal_zone0/temp 3) check 'temps' on ec console Change-Id: Idde1457c42c80850b5b8ac22781060ed9b224d13 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/61896 Reviewed-on: http://review.coreboot.org/4367 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2013-12-21falco: Enable RTD2132 spread spectrum at 1.0%Duncan Laurie
This may need further tuning but will start at 1.0%. boot on falco and check /sys/firmware/log localhost ~ # grep RTD2132 /sys/firmware/log RTD2132: Enable 1.0% Spread Spectrum I2C: 01:35 (Realtek RTD2132 LVDS Bridge) Change-Id: I96e1c14dbc6a7bfaf1c8deb1806c48bf2fd3e32a Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/61895 Reviewed-on: http://review.coreboot.org/4366 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2013-12-21bolt: make the gpio interrupts edge sensitiveAaron Durbin
The drivers in the kernel expect the devices using gpios to generate interrupts to be edge sensitive. Make it so. Change-Id: I920ef621682d33ba081f737e97f0239f903db2f7 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/61678 Reviewed-by: Stefan Reinauer <reinauer@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4361 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2013-12-12bolt: Initial mainboard commitDuncan Laurie
BUG=chrome-os-partner:20448 BRANCH=none TEST=emerge-bolt chromeos-coreboot-bolt Change-Id: I634a755ac7659e7a977b51bcc061f69eb8263810 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/59843 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4330 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-12HDA: Enable Mini-HDA and fix up PCH-HDA initDuncan Laurie
The SystemAgent contains a mini-hd audio controller at PCI 0:3.0 which uses the same verb table init sequence as the southbridge. In order to avoid two copies of the verb table loading code I separated out the HDA verb table functions into a file that can be re-used and then added a minihd driver to the haswell northbridge. The minihd verb table is the same across devices so it can live within the minihd driver rather than needing to be specified in each separate mainboard. I also fixed up the driver for lynxpoint HDA by following the reference code. Without HDMI cable plugged in driver does not find any codec, and it does not seem to re-probe when HDMI is connected. We may be missing kernel patches for this. hda-intel 0000:00:03.0: no codecs found! With a basic kernel patch to add 0x0a0c device ID to HDA driver and with HDMI cable connected it is much happier: snd_hda_intel 0000:00:03.0: irq 60 for MSI/MSI-X input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9 snd_hda_intel 0000:00:1b.0: irq 61 for MSI/MSI-X input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10 input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11 Change-Id: Ifa587984be4fc2801704a0368b9cdf8379c2450e Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/59336 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4318 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-12slippy/falco/peppy: make GPIO interrupts be edge triggeredDuncan Laurie
The drivers are designed to work with an edge triggered interrupt. Change-Id: I35a121ecfb6409bb9049f4d1e034185bb3bb7557 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/61664 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4360 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-12falco: drive WLAN_DISABLE_L low in S3 and S5Aaron Durbin
When the board is in S3 and S5 the WLAN_DISABLE_L signal can leak power into the WLAN power well since the GPIO controlling WLAN_DISABLE_L is in the suspend well. Therefore, drive WLAN_DISABLE_L low to avoid the power leak. Change-Id: I1a0df80dd47fdbd535aca7a9d49253794c480606 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/61421 Reviewed-on: http://review.coreboot.org/4358 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-12-12exynos5420: Setup clocks for MMC bus controller.Hung-Te Lin
To configure source clocks on Exynos 5420 for MMC drivers. Some registers are different from the 5250. FSYS now has two parts and MMC uses FSYS2. The MMC block uses MPLL as the clock source. The "high-speed" MMC interface runs as 52MHz, so divider is set accordingly. Also, the MMC driver has changed from MSHCI (Mobile Storage Host Controller Interface) to DWMCI (DesignWare MMC Controller Interface). Change-Id: I9ba9cf43e2f2dcd9da747888c0c7676bd545177b Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/60858 Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/4354 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-12peppy: Add backward-compatible RAM_ID table.Shawn Nematbakhsh
Make use of google_chromeec_get_board_version to determine board version, and apply proper RAM_ID table to load correct SPD. Change-Id: I6a2d54759cf2ce98bf53df0db396c6e09368c714 Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/61192 Reviewed-by: Dave Parker <dparker@chromium.org> Reviewed-on: http://review.coreboot.org/4353 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-12Peppy: Update Realtek ALC283 verb tableMartin Roth
Update peppy's verb tables for the Realtek ALC283 Audio Codec. ALC283 Configuration: Digital Mic - NID 12h: Disabled Speakers - NID 14h: Enabled Mono out - NID 17h: Disabled Mic 1 - NID 18h: Disabled Mic 2 - NID 19h: Headphone Jack Line1 - NID 1Ah: Internal Mic Line2 - NID 1Bh: Disabled PCBEEP - NID 1Dh: Enabled SPDIF - NID 1Eh: Disabled HP-OUT - NID 21h: Headphone Jack Mic 1 doesn't seem to really be available, but the documentation refers to NID 18h as MIC1, so it's being disabled as it's not being used. The onboard microphone has been moved to line 1. I had my peppy modified to attach the mic to line1 and mic1 now works with this patch. Mic2 looks harder to rework, so I think that will have to wait for the DVT boards. Change-Id: I7d6ce6b428806b6aed1d36e7e25302fa5ae14b21 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: https://gerrit.chromium.org/gerrit/58880 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4352 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-12-12falco: fix usb port settingsDuncan Laurie
USB2 Port A set to 6.4" and Back Panel USB2 Port B set to 5.2" and Back Panel USB2 Port C set to 12.3" and Internal Other devices all set to Internal. build and boot on falco and check settings. Based on the config settings all ports end up with tuning param 1 == 5 and param 2 == 2 U2ECR[0] = 0x00059501 U2ECR[1] = 0x00059501 U2ECR[2] = 0x00059501 U2ECR[3] = 0x00059501 U2ECR[4] = 0x00059501 U2ECR[5] = 0x00059501 U2ECR[6] = 0x00059501 U2ECR[7] = 0x00059e01 Change-Id: I6b9e6df2679036a501355e6b389a486a6f178f99 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/61297 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4350 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-12-12falco: Remove thermal thresholds that use CTDPDuncan Laurie
This CPU does not support Configurable TDP and so far does not need to use Controllable TDP. Change-Id: I15599cd4e6890dd5c9d9f99bc4e95307a8dcc827 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/60657 Reviewed-on: http://review.coreboot.org/4347 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-12PIT: remove a comment that is incorrect.Ronald G. Minnich
The is_resume comment is wrong for this board. It only applies to the older 5250 cpu. In fact, the is_resume parameter is not needed for ddr init and will likely be removed soon. Change-Id: I4e3c92fcaaa75d3c9223d90acccf053f61406307 Signed-off-by: Ronald G. Minnich <rminnich@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/60103 Reviewed-by: David Hendricks <dhendrix@chromium.org> Commit-Queue: Ronald G. Minnich <rminnich@chromium.org> Tested-by: Ronald G. Minnich <rminnich@chromium.org> Reviewed-on: http://review.coreboot.org/4342 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-12snow: Fix the edid data structure definition so depthcharge works again.Gabe Black
Some new fields were added to the edid data structure, and the edid code was changed to put estimated values into those fields which were ultimately passed into depthcharge or other payloads. On snow we do things different and just declare an edid structure statically which didn't have those members. The rows and columns of the graphics console were 0, and that confused the framebuffer driver and made it loop forever. Change-Id: I6ca3bd948482b347a6a981e83b82b10dca995e5e Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/61057 Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/4341 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-12peppy: RAM_ID + storage changes for next build.Shawn Nematbakhsh
- Update RAM_ID table. - Add DEVSLP0 signal to NGFF SATA port. Note: After this change, old Micron 2GB boards will no longer boot. Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Change-Id: Id68a1d6ace2702cca9c37305726cd55a0bde5005 Reviewed-on: https://gerrit.chromium.org/gerrit/60167 Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-by: Dave Parker <dparker@chromium.org> Commit-Queue: Dave Parker <dparker@chromium.org> Reviewed-on: http://review.coreboot.org/4340 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-12peppy: Disable audio codec enable GPIO in S3 + S5.Shawn Nematbakhsh
To save power, disable audio codec in S3 + S5. Also, refactor Lynxpoint GPIO code slightly to allow usage in SMM binary. Change-Id: I55c4248c89a258b5e4cecf8579eb58f1c15430c0 Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/60950 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4339 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-07peppy: Enable power limiting for thermal controlDuncan Laurie
Limit power to 12W at 73C and remove limit at 68C. To have the CPU consume maximum power it is necessary to stress both the CPU and the GPU. Bastion (chrome.supergiantgames.com) and/or webglsamples.googlecode.com can be useful for this. Testing this properly requires a script to report the running average power readings. The watch_power.sh script is attached to this issue in the partner tracker. 1) Run watch_power.sh continuously: localhost ~ # watch -n 0 bash -e /tmp/watch_power.sh 2) Start Bastion (or other stress apps). The power draw should be close to 15W if under enough load. 3) Watch until temperature climbs above 73C and is caught by the thermal zone 10 second poll, this can be sped up by blocking or removing the fan. 4) The ACPI thermal zone states should change to reflect that active[2] is now enabled and power consumption should drop to 12W. 5) Stop the stress apps and wait until the CPU cools off again, enable the fan again if it was removed. 6) The ACPI thermal zone state should switch back to active[3]. Change-Id: Ie6714a8543d4f06edf8513086fc9c968273bdb23 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/60545 Reviewed-on: http://review.coreboot.org/4335 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-06butterfly: Fix build without ChromeOSKyösti Mälkki
Use a file in CBFS for keyboard layout and ethernet MAC instead of scanning FMAP. Change-Id: I7658c7c4e389deb20d7d8f57cce8b568efdc575d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4307 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-05google/link: use the new edid functions when in FUI modeRonald G. Minnich
The new edid functions support converting the edid to an lb_framebuffer. Use them. Also, since panels seem to set bits per color instead of bits per pixel, just force the right value in the edid struct. Add helpful comment because people don't always believe we need to set the pallette. While we're at it, fix a problem that caused it to not compile. Change-Id: I645edc4e442d9b96303d9e17f175458dc7ef28b6 Signed-off-by: Ronald G. Minnich <rminnich@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/57619 Reviewed-by: Stefan Reinauer <reinauer@google.com> Commit-Queue: Ronald G. Minnich <rminnich@chromium.org> Tested-by: Ronald G. Minnich <rminnich@chromium.org> Reviewed-on: http://review.coreboot.org/4327 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-05peppy: Disable forced dev mode.Shawn Nematbakhsh
Don't force dev mode. Allow users to enter / exit dev mode as normal. Change-Id: I168eb04a8ac102a8c4a1ca8936f78f62b001e0eb Reviewed-on: https://gerrit.chromium.org/gerrit/59492 Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-by: Dave Parker <dparker@chromium.org> Reviewed-on: http://review.coreboot.org/4321 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-05Fix Makefile to include all copies of the SPD sourcesDuncan Laurie
On some systems there may be 2GB SKU that is the same as the 4GB SKU but just one channel of memory. In that case we need to ensure that both copies of the same SPD source end up populated by ensuring that repeated entries are included by using $+ instead of $^. Alternatively we could do the check inside romstage, but it is already set to behave this way if the SPD gets populated correctly. I changed spd_index to 3 in falco romstage to force it to pretend it was a 2GB config of the same memory, then booted to ensure it was indeed limited to 2GB. memcfg channel[0] config (00780008): ECC inactive enhanced interleave mode on rank interleave on DIMMA 2048 MB width x16 single rank, selected DIMMB 0 MB width x16 single rank memcfg channel[1] config (00600000): ECC inactive enhanced interleave mode on rank interleave on DIMMA 0 MB width x8 single rank, selected DIMMB 0 MB width x8 single rank Change-Id: Ibfe5051ccda2fe69e8caff3f3c264116e3411c65 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/59483 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: Jay Kim <yongjaek@chromium.org> Reviewed-on: http://review.coreboot.org/4319 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-03slippy/falco/peppy: Fix Chrome OS GPIO export in ACPIDuncan Laurie
The OIPG package needs to have >1 member to make the chromeos_acpi kernel driver do the right automagic sysfs topology creation. Additionally an "unimplemented" GPIO should be reported as 0xFF because 0 is a valid GPIO number. verify crossystem on slippy $ sudo crossystem | grep -e recoverysw_cur -e wpsw_cur recoverysw_cur = (error) wpsw_cur = 1 Change-Id: I06dff09152bde30a3ffe58b1defe9d299155472c Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/57471 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4221 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-03haswell boards: Enable VIRTUAL_DEV_SWITCHDuncan Laurie
This config option was not enabled which was preventing the user from enabling developer mode from recovery mode. With this enabled we can disable the "dev mode by default" behavior and let people enable it by entering recovery mode. This will make the firmware behave like a typical chromeos device. Peppy is left in "default dev mode" until after bringup. 1) boot slippy in normal mode by default 2) enter recovery mode with servo button 3) Ctrl+D on USB keyboard to enter developer mode 4) boot slippy in developer mode Change-Id: I414c0d10dd0489e3c89798f75a2872a43297c8d8 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/57350 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4220 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-02Add option to disable ChromeOSKyösti Mälkki
Those building Chromebook firmware from coreboot git might be more interested in building without ChromeOS extras. Change-Id: I2f176d059fd45bf4eb02cc0f3f1dcc353095d0ce Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3977 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-02haswell: Update pei_data to match ref codeDuncan Laurie
- Add a new USB location field - Add a new "ddr_refresh_2x" field, enabled on Falco only - Fix copy+paste bug in baskingridge Checked that tREFI is halved during memory setup in the memory training log: tREFImin = 6240 << DEFAULT C(0).tREFI = 0xc30 << MODIFIED (=3120) C(0).tREFI = 0xc30 << MODIFIED (=3120) Also ensure that the SD card is detected properly again. Change-Id: Ie3a82c08df06ada9af56282b5255caefa56487f2 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/57349 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4219 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-02falco: Update panel power sequence timingsDuncan Laurie
These are based on the datasheet and I included the timing values I used from the docs. Change-Id: Ib75b2c5e50ac09d1e4cf9dd22229bb0f0a8965a4 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/58540 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4234 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-02peppy: Port updates from slippy/falco boardsDuncan Laurie
- Add HDA verb table - Add on-board device table - Add panel power sequencing values Change-Id: I1b3450c2740ec1d930f157a9b23550e1efc8668f Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/58197 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4233 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-02peppy: Add 2GB DRAM configuration.Shawn Nematbakhsh
Currently, all Peppy boards w/ '000' SPD GPIOs have 2GB DRAM. Disable the second DRAM channel based upon the GPIOs. Need to change / confirm this for upcoming builds. Change-Id: I7085ddecb80626cc0bed99ba7b174c6b80350696 Reviewed-on: https://gerrit.chromium.org/gerrit/58620 Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4238 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-02peppy: Re-enable EC software syncShawn Nematbakhsh
The EC was disabling flash commands and sysjump was not working properly. With those two fixed software sync works properly. (Taken from I63ca00d6c94854f2b395eb736ce20792da5f8de2). Change-Id: I9c7d1d1f1aaf7de33d0cec5f6daf648576ba8900 Reviewed-on: https://gerrit.chromium.org/gerrit/57289 Reviewed-by: Dave Parker <dparker@chromium.org> Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4212 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-02peppy: Update GPIO table + USB port map.Shawn Nematbakhsh
- Update GPIO table to match board. - Update USB port map. - Remove iSSD power sequencing code. Change-Id: Iaa8e5921ed9db6bcfd18b5a888c7f80b2c93a710 Reviewed-on: https://gerrit.chromium.org/gerrit/56869 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4211 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-02Add description to MAINBOARD_VENDOR string so it can be overriddenDuncan Laurie
A quirk of the Kconfig used in coreboot is that config options cannot be overriden by local config changes unless they have a description string. 1) Add CONFIG_MAINBOARD_VENDOR="Custom" to local config 2) Build and flash coreboot 3) cat /sys/class/dmi/id/sys_vendor and look for "Custom" Change-Id: I1b5f2124cd4a22c056c025143ae5bcaafa6b03f0 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/59088 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4248 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-02peppy: Add an inverted input GPIO typeShawn Nematbakhsh
The wake device input pins are active low and the GPIOs need to be set as inverted when they are marked as an input so they are not spuriously logged. Also sync pin states from Falco initial commit. Reference change: I15d38dcc9b2fb4b2b0eb27da358fa3c343e22323 Change-Id: I66e136d389d53a367436d816fa84dacdc8e86bad Reviewed-on: https://gerrit.chromium.org/gerrit/58334 Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-by: Dave Parker <dparker@chromium.org> Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> Signed-off-by: Shawn Nematbakhsh <shawnn@google.com> Reviewed-on: http://review.coreboot.org/4247 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-02falco/slippy: Fix DMIC nid verb.Dylan Reid
Set nid 0x12 instead of nid 0x05. The DMIC is on NIC 0x12. Change-Id: Ifc883b65a50aeec6a6d3ad02fe8418f124e6241d Signed-off-by: Dylan Reid <dgreid@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/58711 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Commit-Queue: Duncan Laurie <dlaurie@chromium.org> Tested-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Jay Kim <yongjaek@chromium.org> Tested-by: Jay Kim <yongjaek@chromium.org> Reviewed-on: http://review.coreboot.org/4246 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-01slippy/falco/peppy: Fix SPD GPIO initialization.Aaron Durbin
SPD GPIOs were being read prior to initialization in romstage_common. To fix, pass the copy_spd function to romstage_common, to be called at the appropriate time (after PCH init, before DRAM init). Change-Id: I2554813e56a58c8c81456f1a53cc8ce9c2030a73 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/58608 Reviewed-on: http://review.coreboot.org/4237 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-01Butterfly: Force DDR refresh rate to 2x.Shawn Nematbakhsh
Due to OEM request, always set DDR refresh rate at 2x. Change-Id: I81a4f57aca6388551dca6effbd9a4ac1a97e4f5a Reviewed-on: https://gerrit.chromium.org/gerrit/50477 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4214 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-26lynxpoint: Add an inverted input GPIO typeDuncan Laurie
The wake device input pins are active low and the GPIOs need to be set as inverted when they are marked as an input so they are not spuriously logged. suspend/resume on slippy with trackpad wake: 8 | 2013-05-29 07:43:14 | ACPI Enter | S3 9 | 2013-05-29 07:43:18 | ACPI Wake | S3 10 | 2013-05-29 07:43:18 | Wake Source | GPIO | 12 and with power button wake: 11 | 2013-05-29 07:43:35 | ACPI Enter | S3 12 | 2013-05-29 07:43:40 | EC Event | Power Button 13 | 2013-05-29 07:43:40 | ACPI Wake | S3 14 | 2013-05-29 07:43:40 | Wake Source | Power Button | 0 Change-Id: I15d38dcc9b2fb4b2b0eb27da358fa3c343e22323 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/56940 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4209 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-11-26google/parrot/smihandler.c: Use `battery_critical_logged` only with `ELOG_GSMI`Paul Menzel
Make the declaration and use of it conditional on the ELOG_GSMI Kconfig variable. Change-Id: I2ef291d2f3e7d35545014e03ba8e0045da6050e5 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3987 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-26slippy/falco: Re-enable EC software syncDuncan Laurie
The EC was disabling flash commands and sysjump was not working properly. With those two fixed software sync works properly. Google Chrome EC MKBP driver ready, id 'slippy_no_version' Clearing the recovery request. EC hash:7fea29992ef72e3e64d8ffe522aa1dfa68dcb44a2da96a4c19530ea1a0bd22c4 EC-RW hash address, size are 0xffa1cfe8, 32. Hash = 727e79934d9394184da496cebc27f7275b9d2d91079bf125d8f977a1f8aa4cde Expected hash:727e79934d9394184da496cebc27f7275b9d2d91079bf125d8f977a1f8aa4cde EC-RW firmware address, size are 0xffad000c, 57180. VbEcSoftwareSync() - expected len = 57180 Computed hash of expected image:727e79934d9394184da496cebc27f7275b9d2d91079bf125d8f977a1f8aa4cde VbEcSoftwareSync() updating EC-RW... VbEcSoftwareSync() jumping to EC-RW VbEcSoftwareSync() in RW; done Change-Id: I63ca00d6c94854f2b395eb736ce20792da5f8de2 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/56821 Reviewed-on: http://review.coreboot.org/4208 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-11-26falco: update verbs for ALC283Duncan Laurie
Set verbs to reflect the layout used for ALC283 in Falco, which ends up being the same as Slippy. Change-Id: I3dce4effefaa91ee5bdcbe2a8a3750ebc41376ad Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/58196 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4232 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25slippy: update verbs for ALC283Dylan Reid
Set verbs to reflect the layout used for the ALC283 in slippy. install on slippy and check that headphone switch works as does external mic. Change-Id: I2d6bcda9cf8bbf49cbb6d2dbbe7f1a5adf315d8a Signed-off-by: Dylan Reid <dgreid@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/57560 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4224 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25peppy: Add Elipda DIMM SPDShawn Nematbakhsh
Peppy RAM ID table is as follows: 000 41K256M16HA 001 H5TC4G63AFR 010 EDJ4216EFBG Elpida SPD taken from Ib1e430cd390b4dbc013fc0802f1a59c1a0412577 by dlaurie. Change-Id: Iac156a2d25435514f28e2e73bef617d0fe2d90a1 Reviewed-on: https://gerrit.chromium.org/gerrit/56687 Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-by: Dave Parker <dparker@chromium.org> Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4201 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25peppy: Initial mainboard commitShawn Nematbakhsh
Taken directly from slippy with only constant + string changes. (Peppy port of I4172460d3b075bfd5bb22013a6225cf0e8f95b9c by dlaurie) The following changes are required in a subsequent commit: - Add Elpida SPD data. - Update GPIO map. - Remove iSSD power sequencing. - Update USB port map. Change-Id: I01dfb841f0e9186cf8a0a23f72e7be986a83be42 Reviewed-on: https://gerrit.chromium.org/gerrit/56513 Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-by: Dave Parker <dparker@chromium.org> Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4200 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25falco: Update DIMM SPD tableDuncan Laurie
RAM_ID indices have been changed and settled on a 2GB config that will be the same DRAM chips but only used in one channel. Change-Id: I444e655883ae045622ab3dfb964da4d7f86e1c0d Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/56810 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4198 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25falco: Add panel power sequence timingsDuncan Laurie
These are placeholder values until we can configure for the exact panel. Change-Id: If40367c0e5f80d46d085c89b0edae60f1ccacdaf Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/56808 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4197 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25falco: Add on-board devices and configure GPIO irq/wakeDuncan Laurie
Add the onboard I2C devices for Falco trackpad/lightsensor and generate SMBIOS Type41 tables for them. Add ACPI device for the trackpad to expose the interrupt map to the OS so it can be used. Configure interrupt GPIOs as PIRQ type and wake GPIOs as just standard input type. The wake GPIO is reconfigured as ACPI SCI in the specific device _DSW method. This prevents the wake GPIO from generating a flood of SCI at runtime. LTE_WAKE_L_Q and WLAN_WAKE_L_Q are left as ACPI SCI as these are not repurposed interrupt pins so they are not generated at runtime. SIM_DET and ALS_INT_L are set as input since we don't have an interrupt handler for them. Change-Id: Ibe9687b2f7f41ead18353c3f650219fe6e94ae2f Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/56632 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4191 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25slippy: Add on-board devices and configure GPIO irq/wakeDuncan Laurie
Add the onboard I2C devices for Slippy trackpad/lightsensor and generate SMBIOS Type41 tables for them. Add ACPI device for the trackpad to expose the interrupt map to the OS so it can be used. Configure interrupt GPIOs as PIRQ type and wake GPIOs as just standard input type. The wake GPIO is reconfigured as ACPI SCI in the specific device _DSW method. This prevents the wake GPIO from generating a flood of SCI at runtime. LTE_WAKE_L_Q and WLAN_WAKE_L_Q are left as ACPI SCI as these are not repurposed interrupt pins so they are not generated at runtime. SIM_DET and ALS_INT_L are set as input since we don't have an interrupt handler for them. tested on slippy with trackpad with additional kernel changes to chromeos_laptop.c to initialize devices. 1) Ensure trackpad interrupt is functional and that there is not a flood of ACPI SCI when trackpad does interrupt: 9: 1 0 0 0 IO-APIC-fasteoi acpi 37: 421 0 0 0 IO-APIC-fasteoi cyapa 2) Ensure that devices are exposed as wake capable: Device S-state Status Sysfs node TPAD S3 *enabled pnp:00:00 TSCR S3 *disabled pnp:00:01 3) Ensure that trackpad can wake from S3 by default, but that it does not cause an immediate wake when entering suspend. 4) Ensure that trackpad can be disabled as a wake source with echo TPAD > /proc/acpi/wakeup Change-Id: Id562d20b54eeefec56040b8f70ef238911312628 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/56622 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4190 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-11-25falco: Add Elpida DIMM SPDDuncan Laurie
This was provided by the vendor but I added the part number at byte 128-143 so it can be identified when extracted by mosys. Change-Id: Ib1e430cd390b4dbc013fc0802f1a59c1a0412577 Reviewed-on: https://gerrit.chromium.org/gerrit/56634 Tested-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4192 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25smbios: Add generic type41 write functionDuncan Laurie
Mainboards were defining their own SMBIOS type41 write function. Instead pull this into the generic SMBIOS code and change the existing mainboards to make use of it. Change-Id: I3c8a95ca51fe2a3118dc8d1154011ccfed5fbcbc Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/56619 Reviewed-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/4187 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25haswell: update pei_data data structureAaron Durbin
Update and use the new pei_data data structure. Now that the reference code is fixed it's possible to properly disable/enable the USB2 and USB3 ports correctly. Change-Id: I075c646e7574be354420b6e59507e8917a97d0f0 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/56594 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4185 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25falco: Initial mainboard commitDuncan Laurie
- Only the first two DIMM SPDs are specified so far - GPIO map is updated - iSSD power sequencing removed - USB port map updated Change-Id: I4172460d3b075bfd5bb22013a6225cf0e8f95b9c Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/56329 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4184 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25slippy: Enable EC SMIDuncan Laurie
Enable GPIO SMI for GPIO34 and set it as inverted so it is only generated when it is raised by the EC. 1) ec console command: lidopen 2) wait until booted to developer screen 3) ec console command: lidclose 4) ensure system turns off Change-Id: I7d50f171f3f4539c7c264103d1ffc7c5d0f1c7ba Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/56052 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4177 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-25lynxpoint: Change SerialIO device enable reporting to ACPIDuncan Laurie
In order to report whether coreboot enabled a SerialIO device in ACPI mode we had been relying on reading NVS in the _STA method for the SerialIO device. The ACPI _STA method has restrictions on what it can access and is unable to access OperationRegions outside its scope which means it should not be trying to read NVS. This change adds a new SSDT to the ACPI tables and fills it with constants that indicate whether or not a device is enabled in ACPI mode. The ACPI code is changed to read these variables from the SSDT and use that instead of trying to query a variable in NVS. Attempt to use lpt-clk driver to probe the device clocks for SerialIO devices and see that the kernel does not complain about accessing the GNVS region. Change-Id: I8538bee4390daed4ecca679496ab0cb313f174ce Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/51369 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4170 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25slippy: Minor vboot related fixesDuncan Laurie
- Disable EC software sync for now - Report correct EC active firmware mode - Force enable developer mode by default - Set up PCH generic decode regions in romstage - Pass the oprom_is_loaded flag into vboot handoff data Change-Id: Ib7ab35e6897c19455cbeecba88160ae830ea7984 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/51155 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4169 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25Fix int15 return value for mainboard oprom handlersDuncan Laurie
These boards were returning 0 to indicate success when the realmode handler expects it to return 1 to indicate that it handled the interrupt. Change-Id: I2baeaf8c2774fa7668a8b2f2d9ad698302eefb21 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/50881 Reviewed-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/4168 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25lynxpoint: Move ME lock down to ramstageDuncan Laurie
Now that we have RW ramstage we don't need to have the management engine lock down step done in a final SMM. ME: mkhi_end_of_post ME: END OF POST message successful (0) PCI: 00:16.0: Disabling device Change-Id: I9db4e72e38be58cc875c1622a966d8fcacc83280 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/49757 Reviewed-on: http://review.coreboot.org/4153 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25lynxpoint: export mem console pointer in ACPIAaron Durbin
Instead of having an OS re-parse cbmem book-keeping records for the cbmem allocator just to get the console buffer export the pointer to the memory console directly in a field named 'CBMC'. This field lives in the GNVS table. Change-Id: Ief0c4da7b18df66feb9c816c9f4abdf5a72bd3a4 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/49764 Reviewed-by: Stefan Reinauer <reinauer@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4149 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25Fix VGA option rom INT15 handlerStefan Reinauer
The format of this function changed but was not updated in all mainboards. This fixes all Sandybridge/Ivybridge boards. The int15 handler no longer takes a regs structure as an argument and instead uses global variables. The yabel interface is now similar enough that we can drop the duplicate handler. Change-Id: Icdaae4d6d50884f6d7bce7a167d48cb1d4807010 Reviewed-on: https://gerrit.chromium.org/gerrit/48969 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Stefan Reinauer <reinauer@google.com> Tested-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/4135 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-25google/butterfly: Declare mrc_scrambler_seed_chk in cmos.layoutAlexandru Gagniuc
SandyBridge raminit uses this CMOS option. If it is not declared, the build fails when USE_OPTION_TABLE is selected. Change-Id: I1ba1f994d4ea3824dc66e8f35d0b5b24b88d4dd6 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/4269 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-24haswell: enable monotonic timerAaron Durbin
For all the current haswell boards enable the monotonic timer. The ULT boards use the 24MHz MSR while the non-ULT boards use the local apic. Change-Id: I8b19f526a5a49e8467f296c566a2c4263bc5a863 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/49763 Reviewed-by: Stefan Reinauer <reinauer@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4148 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24smi: Update mainboard_smi_gpi() to have 32bit argumentDuncan Laurie
With the LynxPoint chipset there are more than 16 possible GPIOs that can trigger an SMI so we need a mainboard handler that can support this. There are only a handful of users of this function so just change them all to use the new prototype. Change-Id: I3d96da0397d6584f713fcf6003054b25c1c92939 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/49530 Reviewed-by: Stefan Reinauer <reinauer@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4145 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24slippy: Add panel power sequence timingsDuncan Laurie
These are placeholder values until we can configure for the exact panel. Change-Id: Ibe88cc3588947366eb1728e5b3e1ab8c8be6dfe8 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/56807 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4196 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24slippy: Clean up for easier portingDuncan Laurie
Minor tweaks to variable names in the slippy mainboard that make it easier to base a new board from without as much renaming. Also properly set up the thermal variables for the thermal zone that is defined in ACPI instead of using the generic setup from WTM2. Change-Id: I752c1a50bfdc06b6ddad95bd1331c6870b9f9df2 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/56328 Reviewed-on: http://review.coreboot.org/4183 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24slippy: Run EC init as part of mainboard init stepDuncan Laurie
This will log and clear EC events so they do not take effect when the SMI handler is enabled. Change-Id: I5ef563f7cedc8977410cc3f69e2655fc4e14c9eb Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/56055 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4178 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24slippy: Update interrupt routingDuncan Laurie
The SerialIO devices have specific requirements for PCI interrupt mode to use PIRQ{E,F,G,H} that are not being met. D21:F0 uses PIRQE, which must not be shared with other PCH D21:F1-F6 share PIRQF, which must not be shared with other PCH D23:F0 uses PIRQH, which must not be shared with other PCH - Fix D20IR -> D20IP typo - Remove D25/EHCI2 as it does not exist - Reorder other interrupts to clear PIRQE/PIRQF/PIRQH Check device interrupts in the kernel 0: IO-APIC-edge timer 1: IO-APIC-edge i8042 8: IO-APIC-edge rtc0 9: IO-APIC-fasteoi acpi 16: IO-APIC-fasteoi ath9k 18: IO-APIC-fasteoi i801_smbus 19: IO-APIC-fasteoi ehci_hcd:usb1 21: IO-APIC-fasteoi i2c-designware-pci--1, i2c-designware-pci--1 40: PCI-MSI-edge PCIe PME 41: PCI-MSI-edge i915 42: PCI-MSI-edge ahci 43: PCI-MSI-edge xhci_hcd 44: PCI-MSI-edge snd_hda_intel Change-Id: Id4c08d11d2860f270c6387138acdc7d3d83a85b5 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/56028 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4176 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24slippy: set PWM valuesAaron Durbin
The dev screen was not displaying properly. With the PWM values programmed the screen displays correctly. Change-Id: I82b56a92e4168022082a2e519026977ee2ae0c9e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/51472 Reviewed-on: http://review.coreboot.org/4172 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24slippy: Put SerialIO devices in PCI modeDuncan Laurie
The device at function 0 also needs to be enabled or the kernel will ignore all other functions. 00:15.0 DMA controller: Intel Corporation Lynx Point-LP Low Power Sub-System DMA (rev 03) 00:15.1 Serial bus controller [0c80]: Intel Corporation Lynx Point-LP I2C Controller #0 (rev 03) 00:15.2 Serial bus controller [0c80]: Intel Corporation Lynx Point-LP I2C Controller #1 (rev 03) Change-Id: I0e1bc7bb719756496c46664d66dc1b1cf2f4d1ba Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/51370 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4171 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24slippy: Add EC to the device treeDuncan Laurie
This lets the keyboard init get called properly. Change-Id: I11ffb459907188a58149d28a6ade0b7de7d15d08 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/50853 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4167 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24slippy: Update SPDDuncan Laurie
Change-Id: Iae0258ceb0424df0937d2cec7dd885060f5b4e48 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/50082 Reviewed-on: http://review.coreboot.org/4157 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24slippy: Add SPD data for on-board memoryDuncan Laurie
Change-Id: I7a617fe06d23b906f718ed30f1378f7d220b2799 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/49911 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4154 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24slippy: Prepare LPC IO decode ranges for ECDuncan Laurie
- 0x200-0x208 for host command window - 0x800-0x8ff for host command arguments and parameters - 0x900-0x9ff for exported EC memory map Change-Id: I064b969843ef0d3c602793d1cb3d82715775c05e Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/49755 Reviewed-on: http://review.coreboot.org/4151 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24slippy: Add iSSD power sequencingDuncan Laurie
Without an LM10506-A the power sequencing for this part needs to be done manually using GPIOs. Change-Id: I842152e5f7c30c8dbe37df0c344935a659eb2887 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/49648 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4150 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-24slippy: Initial mainboard commitDuncan Laurie
Change-Id: I33876b90902d4a08d760eb482b08ba41be6e3695 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/49531 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4147 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-10-14Revert "CBMEM: Always have early initialisation"Kyösti Mälkki
This reverts commit de1fe7f655c549e8dce5b34218221890fa5ccc34. While things appeared to work, there were actually invalid references to CAR storage after CAR was torn down on boards without EARLY_CBMEM_INIT. It was discussed use of CAR_GLOBAL should be restricted to boards that handle CAR migration properly. Change-Id: I9969d2ea79c334a7f95a0dbb7c78065720e6ccae Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3968 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-21CBMEM: Always select CAR_MIGRATIONKyösti Mälkki
If romstage does not make cbmem_initialize() call, linker should optimize the code for CAR migration away. This simplifies design of CBMEM console by a considerable amount. As console buffer is now migrated within cbmem_initialize() call there is no longer need for cbmemc_reinit() call made at end of romstage. Change-Id: I8675ecaafb641fa02675e9ba3f374caa8e240f1d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3916 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-21CBMEM: Always have early initialisationKyösti Mälkki
Assume EARLY_CBMEM_INIT=y everywhere and remove option from Kconfig. If romstage does not make the cbmem_initialize() call, features like COLLECT_TIMESTAMPS and early CBMEM_CONSOLE will execute during romstage, but that data will get lost as no CAR migration is executed. Change-Id: I5615645ed0f5fd78fbc372cf5c3da71a3134dd85 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3917 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-21timestamps: Stash early timestamps in CAR_GLOBALKyösti Mälkki
Change-Id: I87b454c748cf885491d5b38bfe53a2ec0e9f38c5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3910 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-21timestamps intel: Move timestamp scratchpad to chipsetKyösti Mälkki
This retrieves back the value stored with store_initial_timestamp() in the bootblock for southbridge. Change-Id: I377c823706c33ed65af023d20d2e4323edd31199 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3908 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-17Fix whitespace leaked into treeKyösti Mälkki
Clean whitespace errors that have gotten past lint-stable-003-whitespace and gerrit review. Change-Id: Id76fc68e9d32d1b2b672d519b75cdc80cc4f1ad9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3920 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-09-11CBMEM: Drop parameter from cbmem_reinit()Kyösti Mälkki
Function is always called with get_top_of_ram() - HIGH_MEMORY_SIZE which equals cbmem_base, thus no need to pass it as a parameter. Change-Id: If026cb567ff534716cd9200cdffa08b21ac0c162 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3564 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-11CBMEM ARM: Prefer get_cbmem_table() over cbmem_late_set_table()Kyösti Mälkki
Implementing get_cbmem_table() allows initializing CBMEM earlier. Change-Id: I973f3a84dd9aaa2839959df5dda22909fdb9edeb Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3560 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-11CBMEM: Add cbmem_late_set_table() and drop references to high_tables_baseKyösti Mälkki
This helper function is for compatibility only for chipsets that do not implement get_top_of_ram() to support early CBMEM. Also remove references to globals high_tables_base and _size under arch/ and from two ARMv7 boards. Change-Id: I17eee30635a0368b2ada06e0698425c5ef0ecc53 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3902 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-08-09intel/sandybridge intel/bd82x6x: remove explicit pcie config accessesKyösti Mälkki
Now that MMCONF_SUPPORT_DEFAULT is enabled by default remove the pcie explicit accesses. The default config accesses use MMIO. Change-Id: I58c4b021ac87a035ac2ec2b6b110b75e6d263ab4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3810 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-07-31Drop unused EXTERNAL_MRC_BLOBStefan Reinauer
The Kconfig variable EXTERNAL_MRC_BLOB is not used. Drop it. Change-Id: I3caa5c2b6bcf5d2c13b6987da8ab3987bad0e506 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3829 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2013-07-10pit: Redo the display port bridge initialization code.Gabe Black
The display port bridge on pit is different from the one on snow and needs to be initialized differently. Instead of waiting for the chip to come up on its own and assert the hotplug detect, we need to access it over i2c and get it up and running ourselves. Change-Id: I4bc911cb8e4463edff7beabd2f356cb70ae9f507 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3723 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10pit: Enable the ps8625 driver.Gabe Black
Change-Id: Id1277ceefc844a052627483e6c9d01bcb5da975f Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3722 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10pit: Stop setting up the hardware dp hotplug detect in ROM stage too.Gabe Black
This was removed from ramstage a little while ago and should have been removed from here as well. Change-Id: I6a40ed4a98bedac39e5492e4b1aed3427ab4e08b Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3720 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10PIT: add panel to the list of things to be powered up by the PMICRonald G. Minnich
This appears to be needed, though we have no way to test yet. Change-Id: I39033581011e056258193f2cdff78814361a8d55 Signed-off-by: Ronald G. Minnich <rminnich@google.com> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3719 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10armv7/exynos: Prevent unexpected reboots in resume.Hung-Te Lin
In resume path, if memory setup takes too long without setting PS_HOLD, EC watch dog may power off or reboot the system. To prevent that, we should enable PS_HOLD in same timing as cold boot - right before starting memory setup. Change-Id: I5c294fa7ae015f8cff57b1fd81e5b80902647b15 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3718 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10pit: Replace the tps65090 functions and adjust the hotplug detect line.Gabe Black
The functions which manipulated the tps65090 were removed a while ago because it isn't accessible directly from the AP, it's on an I2C bus that has to be accessed by the EC on our behalf. Now that that capability has been added, we can rewrite the small portion of the the tps65090 we actually used but using the EC passthrough commands. Also, we should not be configuring the hardware display port hotplug detect line since we're using it as a GPIO for other purposes. The GPIO we're using instead defaults to being an input, but to be safe we should probably explicitly configure it as one anyway. Change-Id: I7f8a8a767e3cccb813513940a5feceea482982f5 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3717 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10armv7/pit: Correct EC device in mainboard configuration.Hung-Te Lin
The ChromeOS EC for peach_pit is connected to SPI2 bus, not I2C. Change-Id: Ifeb8a626aa4fc3d3a181a7bc016e3f91be948ae5 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3716 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10armv7/pit: Setup EC on SPI2.Hung-Te Lin
The Embedded Controller (EC) for Pit is connected via SPI2, and needs to be configured before we can talk to it. Change-Id: I1f8e921b4616f15951f3e5fae1ecbf116de4ba90 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3707 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-27 11:25:40 +0000