summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Expand)Author
2016-05-10google/gale: use if (IS_ENABLED()) over #ifdefPatrick Georgi
2016-05-10google/gale: mark RW_LEGACY to carry CBFSPatrick Georgi
2016-05-10soc/qualcomm/ipq40xx: Enable crashdump handlingVaradarajan Narayanan
2016-05-10soc/qualcomm/ipq40xx: Add support for BLSP QUP I2CVaradarajan Narayanan
2016-05-10google/gale: Remove some unwanted codeVaradarajan Narayanan
2016-05-10google/gale: Enable WinBond SPI flash supportVaradarajan Narayanan
2016-05-10soc/qualcomm/ipq40xx: Map OCIMEMVaradarajan Narayanan
2016-05-10google/gale: Remove NAND initVaradarajan Narayanan
2016-05-10google/gale: Implement resetVaradarajan Narayanan
2016-05-10google/gale: Implement resetVaradarajan Narayanan
2016-05-10google/gale: Enable Giga Device SPI flash supportVaradarajan Narayanan
2016-05-10soc/qualcomm/ipq40xx: Return NULL for cbmem_top if DRAM is not initializedVaradarajan Narayanan
2016-05-10google/gale: set the correct GPIOs for recovery and dev.Kan Yan
2016-05-10soc/qualcomm/ipq40xx: Update memory map to align to ipq40xxVaradarajan Narayanan
2016-05-10google/gale: Initial commit for Gale board supportVaradarajan Narayanan
2016-05-09google/gru: enable pp1500 and pp3000 rails as soon as possibleVadim Bendebury
2016-05-09google/gru: kevin: use board version specific SD detect GPIO pinVadim Bendebury
2016-05-09google/gru: select 1.8V as gpio2ab io domainLin Huang
2016-05-09google/gru: add board nameVadim Bendebury
2016-05-09google/gru: Determine Board ID based on the input voltage of ADC1Vadim Bendebury
2016-05-09google/veyron_mickey: Increase RO CBFS size by 512 KbDavid Hendricks
2016-05-09google/gru: power up SD cardVadim Bendebury
2016-05-09rockchip: rk3399: add sdram driverLin Huang
2016-05-09rockchip: rk3399: add spi clock driverShunqian Zheng
2016-05-09google/gru: enable uart2 if configuredShunqian Zheng
2016-05-09google/veyron_romy: Increase RO CBFS size by 512 KbDaisuke Nojiri
2016-05-09google/oak: Add Samsung K4E6E304EB 4G LPDDR3 SDRAM for elm-rev1 SKU2PH Hsu
2016-05-09google/oak: elm: Do not control SPI_LEVEL_ENABLE after elm-rev1Yidi Lin
2016-05-09google/oak: Configure MAINBOARD_PART_NUMBER by the board nameYidi Lin
2016-05-09google/oak: elm: Update the differences between oak-rev6 and elm-rev0Yidi Lin
2016-05-09google/oak: Add derivative board ElmJulius Werner
2016-05-09google/oak: configure displayJitao Shi
2016-05-09mediatek/mt8173: Add display driverJitao Shi
2016-05-09soc/intel/skylake: Enable another VR mailbox command for certain boardsSubrata Banik
2016-05-07google/foster: Configure audio codec padsStefan Reinauer
2016-04-16mainboard/google/gru: Add license header to memlayout.ldMartin Roth
2016-04-16google/gru: Incorporate feedback to #14279Patrick Georgi
2016-04-16google/gru: Add a stub rk3399 mainboardhuang lin
2016-04-13mainboard/google: Update license headersMartin Roth
2016-04-05chromeos.fmd: Mark RW_LEGACY as CBFSPatrick Georgi
2016-04-05google/oak: Log hardware watchdog in eventlogJulius Werner
2016-04-05google/chell: Adjust nuvoton 8825 button thresholds again.Benson Leung
2016-04-05chromeos: Simplify fill_lb_gpios even furtherJulius Werner
2016-03-30storm: Fix compilation errorFurquan Shaikh
2016-03-29google/chell: Update DPTF thermal parametersDuncan Laurie
2016-03-29ipq806x/storm: Return NULL for cbmem_top if DRAM is not initializedFurquan Shaikh
2016-03-25google/intel mainboards: Add missing board_info.txt filesMartin Roth
2016-03-21nb/intel/sandybridge: increase MMCONF_BASE_ADDRESSPatrick Rudolph
2016-03-21google/oak: Move external buck initialization to coreboothenryc.chen
2016-03-18google/oak: Enable RAM_CODE_SUPPORTYidi Lin
2016-03-16skylake mainboards: Configure gpio PADRSTCFG to PLTRSTNaresh G Solanki
2016-03-15google/oak: add table for 4GB configurationPH Hsu
2016-03-15google/oak: Remove EC_SUSPEND_L from APKoro Chen
2016-03-12glados/chell: send an extra VR mailbox commandRizwan Qureshi
2016-03-12mediatek/mt8173: detect sdram size at runtimeYidi Lin
2016-03-12mediatek/mt8173: pll: raising the CPU core frequencyYidi Lin
2016-03-12google/oak: Configure USB OC pinsYidi Lin
2016-03-12google/oak: Config USB Hub for rev5Ben Lok
2016-03-12google/oak: Config audio for rev5Koro Chen
2016-03-12google/oak: Remove obsolete Rev0 settingKoro Chen
2016-03-12google/oak: Enable TP_SHIFT_EN for the revisons before 5 onlyYidi Lin
2016-03-12google/oak: da9212 gpio configuration for rev5henryc.chen
2016-03-12google/oak: Config PANEL_LCD_POWER_EN for rev5Yidi Lin
2016-03-12google/oak: Configure SPI_LEVEL_ENABLE pin for rev5Yidi Lin
2016-03-12google/oak: Initialize i2c bus timing register for TPM and external buckjun.gao
2016-03-12google/oak: add event logCC Ma
2016-03-12google/oak: Add soc ARM Trusted Firmware supportJimmy Huang
2016-03-12google/oak: Initialize DRAMPeter Kao
2016-03-12mt8173: add SPI NOR supportmtk05962
2016-03-10mainboards/google/auron_paine: add new portGeorg Wicherski
2016-03-08nyan: Fix timestamps and CBFS SPI integrationJulius Werner
2016-03-08mainboard/skylake: Include WRDD method in WIFI ACPI deviceDuncan Laurie
2016-03-05sandybridge/gma_lvds: support both Sandy&Ivy on one boardIru Cai
2016-03-01Skylake boards: Enabling HWP (hardware P state control)Subrata Banik
2016-02-29google/chell: Update DPTF configurationDuncan Laurie
2016-02-29google/chell: Update GPIOs for DVT2Duncan Laurie
2016-02-29mainboard/google/chell: provide configuration for all padsAaron Durbin
2016-02-23southbridge/intel/lynxpoint: Use common gpio.cPatrick Rudolph
2016-02-18southbridge/intel/bd82x6x: Use common gpio.cPatrick Rudolph
2016-02-12tegra132/210: Remove memlayout_vboot2.ldJulius Werner
2016-02-12link: Support native raminitVladimir Serbinenko
2016-02-12chromebooks: Define GBB hardware IDsPatrick Georgi
2016-02-12butterfly: Make configurable MRC vs non-MRC.Vladimir Serbinenko
2016-02-12stout: Support native raminitVladimir Serbinenko
2016-02-12Make MRC vs native a config rather than making a separate chipset for it.Vladimir Serbinenko
2016-02-12mainboards: Drop remaining references to vboot indexesPatrick Georgi
2016-02-12Fix butterfly usb map.Vladimir Serbinenko
2016-02-12Move gpio.h to gpio.c on sandy and ivy.Vladimir Serbinenko
2016-02-12Merge sandy/ivybridge romstage flow for MRC and non-MRC.Vladimir Serbinenko
2016-02-10google/veyron_speedy: remove extraneous filePatrick Georgi
2016-02-09stout: Add native gfx initVladimir Serbinenko
2016-02-09ivy: Add a possiblity for mainboard early init.Vladimir Serbinenko
2016-02-09chromebooks: Configure Chrome EC board namesPatrick Georgi
2016-02-09google/lars: Set I2C[4] port voltage to 1.8vdavid
2016-02-09skylake mainboards: Enable backing up VBNV from CMOS to flashDuncan Laurie
2016-02-09google/veyron_rialto: Remove developer mode switchAlexandru M Stan
2016-02-04skylake boards: disable ACPI PM TimerArchana Patni
2016-02-04google/lars: perform early init for CAR *stageAaron Durbin
2016-02-04google/glados: perform early init for CAR *stageAaron Durbin
2016-02-04google/chell: perform early init for CAR *stageAaron Durbin
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 09:27:29 +0000