summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Collapse)Author
2019-04-11google/kukui: Add variant 'Krane'Hung-Te Lin
Add the new configuration 'Krane' that will need at least its own EC. There's currently no difference in coreboot side. BUG=b:130011505 TEST=make menuconfig; make -j # select board=Krane BRANCH=None Change-Id: Ibb2ec42b08f9a51b22c22f3fe99b203f5eb31627 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32261 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-04-11mb/google/sarien: Reserve gpio pins for D3 cold controlEric Lai
Based on HW change, reserve gpio pins for D3 cold control. A13,A15 for Card reader H13 for M.2 SSD BUG=b:123263562 TEST=N/A Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ib4245be8d77c015e56df7b1d53ef82722c51d656 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32242 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-04-11mb/google/sarien: Change GPIOs to avoid leakage during S0iXRoy Mingi Park
Three GPIOs are not being used and this change will save 2-3mW power during S0iX and this power saving is only for Arcada BUG=b:129990365 TEST= Measure total platform power during S0iX from Arcada Change-Id: Ie0208bd6c7affb2e87fd76005b727ea7effdf434 Signed-off-by: Roy Mingi Park <roy.mingi.park@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32164 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-04-11mb/google/ampton: Fix polarity of EN_PP3300_WLAN_L signal.Tim Wawrzynczak
WiFi enable signal was configured and driven as active-high, but the signal is |To start the server in this Emacs process, stop the existing actually active-low BUG=b:130196983 BRANCH=none TEST=Verified WiFi still works after boot, and also after a suspend/resume cycle. Device powers down correctly using "poweroff". Change-Id: I64a67f73564188ad0548a1a770169ef2bca47453 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32255 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-11chromeos: clean up "recovery" and "write protect" GPIOsJoel Kitching
The "write protect" GPIO's cached value is never actually read after entering depthcharge. Ensure the value from get_write_protect_state() is being transferred accurately, so that we may read this GPIO value in depthcharge without resampling. The cached value of the "recovery" GPIO is read only on certain boards which have a physical recovery switch. Correct some of the values sent to boards which presumably never read the previously incorrect value. Most of these inaccuracies are from non-inverted values on ACTIVE_LOW GPIOs. BUG=b:124141368, b:124192753, chromium:950273 TEST=make clean && make test-abuild BRANCH=none Change-Id: Ic17a98768703d7098480a9233b752fe5b201bd51 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32233 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-04-11google/kukui: Use internal CR50_IRQ pull-upYou-Cheng Syu
For Kukui CR50_IRQ pin, we're going to replace external pull-up with internal pull-up. This change won't break older boards, so we can just always do that when setting up GPIOs. BUG=b:124821269 BRANCH=none TEST=Waveform looks correct. Change-Id: Ib1a90dce583a6aa0cec8ac8ba96d1362f50c16a8 Signed-off-by: You-Cheng Syu <youcheng@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32116 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-04-11mb/google/octopus: Disable WLAN prior the entry of S5Kane Chen
ODM reported issues that some systems can't be shutdown to S5 very occasionally. ODM found issue is gone if they remove the WLAN card. So, this change to disable WLAN before system enters S5. This change is validated by ODM and it does help issue. BUG=b:129377927 Change-Id: Ib8e81022b8c9b63bc75e5cc14121233222da7595 Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32246 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Chen Wisley <wisley.chen@quantatw.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-09google/kukui: Configure AP_IN_SLEEP_L correctlyYou-Cheng Syu
This pin should be set to its alternative function SRCLKENA0 instead of GPIO, so that SPM (a power management component of MT8183) can control it. BUG=b:113367227 BRANCH=none TEST=1. Boot. Run 'powerinfo' in EC console and see power state in S0. 2. Run 'powerd_dbus_suspend --wakeup_timeout=10', and then run 'powerinfo' in EC console and see power state in S3. 3. Wait until AP resume. 4. Run 'powerinfo' in EC console and see power state back to S0. Change-Id: I0a7e34f95381dec17eb6d166d6552c12e021bd9a Signed-off-by: You-Cheng Syu <youcheng@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32120 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-09mb/google/hatch: Support 16MiB fmapPhilip Chen
Add a fmd file for 16MiB fmap, so that we can support both 16MiB / 32MiB SPI flash ROM chips. BUG=b:129464811 TEST=build hatch firmware image with 16MiB fmap and verify fmap is updated by 'fuility dump_fmap' Change-Id: Ifc0103c7fd0d99439f40a31d23422401a6dce826 Signed-off-by: Philip Chen <philipchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32219 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-09mb/google/hatch: Add ACPI support for BT reset functionalityTim Wawrzynczak
Expose the Bluetooth BT_DISABLE_L signal in Hatch's devicetree, on both USB2 port 5 and 10. BUG=b:123293169 BRANCH=none TEST=compiles, verified kernel is able to find the reset-gpio Change-Id: I6e4d9786e44f12da71533b6740fdd390f3a57e40 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32216 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-08mb/mainboard/google/sarien/variants: Set correct tcc_offset valueSumeet Pawnikar
Set new tcc_offset value to 10 degree C. This configures the Thermal Control Circuit (TCC) activation value to 90 degree C. It prevents any abrupt thermal shutdown while running heavy workload. This helps to take early thermal throttling action when CPU temperature goes above 90 degree C. Change-Id: Ica77264782b4a3f3e72e73e1b8cb8b2e464fb033 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32181 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-08mb/google/sarien: Add support for melfas touch panelEric Lai
Add a support melfas touch panel with i2c address:0x34. BUG=b:122019253 TEST=tested with new melfas touch panel and worked Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I27f5c47517d093c819cbbbcdafd85d74145887e1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32169 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-06src: Use include <delay.h> when appropriateElyes HAOUAS
Change-Id: I23bc0191ca8fcd88364e5c08be7c90195019e399 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32012 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: David Guckian
2019-04-06{mb,soc/intel/skylake}: remove unused InternalGfxMaxim Polyakov
The InternalGfx option in devicetree.cb is not used to enable iGPU. The patch removes this option from chip.h and mb/*/devicetree.cb files for all boards with skl/kbl processor. Change-Id: I41ecca3fdfb1d4b20ee634a13263ff481dcf440e Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32171 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-04-04mb/google/hatch: Move I2C/SPI options to override treeFurquan Shaikh
This change moves the I2C/SPI devices and configs which do not apply to all variants to override tree. Currently, there are just two variants. However, as we prepare to add more variants, these devices need to be moved out of the base devicetree. BUG=b:129728235 TEST=Verified that I2C/SPI devices are present in static.c for hatch and hatch_whl. Change-Id: I9426f6bf5f8514de5f1889e22e57105749fd92de Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32138 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-04mb/google/hatch: Change the DEVSLP reset config to PLTRSTRizwan Qureshi
In S3 the PCH is driving the DEVSLP signal low, assuming that the SATA device is already powered off. However on hatch the SATA power is still enabled. And, since DEVSLP is low, this causes the SATA device to not enter low power state. The fix here is to set the pad config to be reset on PLTRST assertion which will cause the pin to be high impedance state and will be pulled up by the SATA device. BUG=b:126611255 BRANCH=None TEST=Make sure that S3 and S0ix is working fine on hatch. And also make sure that DEVSLP is pulled high in S3. Change-Id: Ifb6a71a72244522c8dd8d48e9b9f8dc6feef8981 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32136 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-04mb/google/fizz/variants/karma: Clear GPP_B4 when entering S5David Wu
Set GPP_B4 to low in S5 to meet touch panel power sequence BUG=b:124197348 BRANCH=master TEST=Verify GPP_B4 is low. Change-Id: I65deb33a45fdc0c0ce64deaa29c2790029dc1d12 Signed-off-by: David Wu <David_Wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29796 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-04mb/google/hatch: Add Kohaku boardShelley Chen
Adding Kohaku as a variant of hatch. BUG=b:129706980 BRANCH=NONE TEST=./util/abuild/abuild -p none -t google/hatch -x -a make sure HATCH_KOHAKU is built as well. Change-Id: I5b451f421f6d353005e6b73eac180dcec2e8b0c0 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32161 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-04mb/google/hatch: Create kohaku variantShelley Chen
Creating Kohaku hatch variant. Currently taking a copy of the hatch variant. Kohaku-specific changes to come in future CLs. BUG=b:129706980 BRANCH=NONE TEST=NONE Change-Id: Ib4b8c2c8332910d992549e3aae8e6aff5234698b Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32160 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-04vboot: remove Kconfig option VBOOT_PHYSICAL_REC_SWITCHJoel Kitching
This option is duplicated in depthcharge: https://crrev.com/c/1545144 BUG=b:124141368, b:124192753, chromium:943150 TEST=make clean && make test-abuild CQ-DEPEND=CL:1545144 BRANCH=none Change-Id: I48e20ad21cdcb948a23387d3e5fcf142723b0c82 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32135 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-04-03mb/google/hatch: Enable Goodix Touch ScreenEric Lai
Enable Goodix touch screen. Follow GT7375P_Datasheet_Rev.0.1 BUG=b:124460799 BRANCH=None TEST=local build and tested with Goodix touch screen Change-Id: Ib204e6b77b87ba6c775cf38e572476dd9eb37d1d Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32134 Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-03mb/google/sarien/variants/sarien: Update thermal configuration for DPTFJohn Su
Follow thermal table for second tunning. BUG=b:129509918 TEST=Built and tested on sarien system Change-Id: I64844b84891dc3ab7abe9378cdca5dcf57b3e433 Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32118 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2019-04-02mb/google/poppy/variants/nami: update sku_ids for PantheonFrank Wu
The sku ids are updated for Pantheon. Sync'ing the sku_ids list in the master sku sheet for Pantheon. BUG=b:121207221 BRANCH=firmware-nami-10775.B TEST=emerge-nami coreboot chromeos-bootimage Change-Id: Ibf683ca8219b2980ea9d9c40b06db264d58440b0 Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32098 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
2019-04-02mb/google/hatch: Change GPIO_E1 settingJohn Su
For HW require to change GPIO_E1. Change GOIO_E1 setting from NF2(SATAGP1) to NF1(SATAPCIE1). BUG=b:123730924 TEST=flash BIOS and make sure hatch boots up properly Change-Id: I0f5569e13b17a2dc713be5031a63436e8f31f911 Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32099 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-02mb/google/hatch: Re-configure GPP_A12 as GPO before entering sleepKrishna Prasad Bhat
GPP_A12 has a Native3 (SX_EXIT_HOLDOFF#) mode, which allows to delay resuming to S0. If this pad is not locked and platform was not initially designed for this functionality, malware could reconfigure this pads setting under OS (switch to Native3), which would make platform not able to resume until G3 is applied. To prevent misuse of this pad, re-configure this pad before entering S3 and S5 to guarantee that the pad configuration is correct. BUG=b:128686027 Change-Id: I1e7979baa491acf2c56d223afb4618f0f6429e37 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32111 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-01assert: Make dead_code() work at link-time instead of compile-timeJulius Werner
The dead_code() macro can be used to ensure that a certain code path is compile-time eliminated (e.g. if you want to make sure it's never executed for certain Kconfig combinations). Unfortunately, the current implementation via __attribute__((error)) hits only at the GCC level. This can catch code that can be compile-time eliminated based on state within the same file, but it cannot be used in cases where a certain library function is built but then garbage collected at link time. This patch improves the macro by relying solely on the linker finding an undefined reference. Unfortunately this makes the error message a little less expressive (can no longer pass a custom string), but it is still readable and one can add code comments next to the assertion to elaborate further if necessary Change-Id: I63399dc484e2150d8c027bc0256d9285e471f7cc Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32113 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-01mb/google/sarien: Enable Bluetooth RF killLijian Zhao
Add bluetooth Rfkill function to recover the Bluetooth controller in cases where itself has entered a bad state and needs to be recovered. Bug=b:129375810 TEST=Boot up into OS and dump SSDT table, check there's _DSD entry under Bluetooth devices with GPIO in. Also confirm bluetooth itself is functional. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I79a310a55d94d7d20d1705afc11fe47cbb81abc1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32124 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-04-01mb/google/hatch: Unlock GPIO padsKrishna Prasad Bhat
GPP_A12 is being used as FPMCU_RST in hatch. This GPIO is being padlocked in FSP and cannot used in kernel. Hence unlock the GPIO pads to export this pin in kernel to be used as FPMCU_RST. BUG=b:128686027 BRANCH=None TEST=Read Pad Configuration Lock (PADCFGLOCK_GPP_A_0) register. localhost /sys/class/gpio # iotools mmio_read32 0xfd6e0080 0x00000000 localhost /sys/class/gpio # echo 212 > export Change-Id: Ie0439956e6c8e386435e535665ccaf2ab82adeb0 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32126 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-29src: Use include <reset.h> when appropriateElyes HAOUAS
Change-Id: I3b852cae4ef84d257bf1e5486447583bdd16b441 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29301 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-03-29mb/google/arcada: Make bluetooth reset_gpio active lowMike Hsieh
Follow b:129375810 to set bluetooth reset_gpio as ACPI_GPIO_OUTPUT_ACTIVE_LOW BUG=b:129375810 TEST=Verified BT function on Arcada DVT1 system. Signed-off-by: Mike Hsieh <mike_hsieh@wistron.corp-partner.google.com> Change-Id: I816eb2a76f642a2bb1702f38138bce7916334011 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32115 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-03-29mb/google/arcada: Make touchscreen IRQ level triggeredMike Hsieh
Touchscreen lost function after boot with stylus touching the screen BUG=b:128554235 Signed-off-by: Mike Hsieh <mike_hsieh@wistron.corp-partner.google.com> Change-Id: I692fc6f245b7fade67862da4986a83d11a2cd51f Reviewed-on: https://review.coreboot.org/c/coreboot/+/32100 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-29mb/google/hatch: Deassert EN_PP3300_WWAN during sleepMaulik V Vaghela
Deassert EN_PP3300_WWAN to turn the WWAN module completely off when entering S5. This is the same fix in commit eeb475c5c for coral board. BUG=none BRANCH=none TEST=On hatch, Perform a quick system power cycle, verify that the modem is powered cycle and the SIM with PIN lock enabled requests unlocking. Change-Id: I3ec8ccb7618189b9e8586f5571a68d3309597ee7 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32051 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-28mb/google/sarien: Call EC romstage init functionDuncan Laurie
When in romstage call into the EC init function so it can send a progress code to the EC before memory training starts. BUG=b:127875364 TEST=boot with FSP debug and ensure EC does not try to turn off the system while it is still booting. Change-Id: I5d99fb16bae250a82b652c530c13977e74c3378b Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32092 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-03-28Mistral: Enable USB in romstageNitheesh Sekar
Enable USB support for mistral in romstage. TEST=build & run Change-Id: I5c2bbe16aa3601e014a2b77d192565402ed23794 Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32063 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-28chromeos: remove remaining dev switch referencesJoel Kitching
As part of chromium:942901, physical dev switch functionality is being deprecated. Remove remaining references as well as helper macros. BUG=chromium:942901 TEST=Build locally TEST=make clean && make test-abuild BRANCH=none Change-Id: Ib4eec083eb76d41b47685701f9394c684ddc6b37 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32064 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-03-28mb/google/hatch/variants: Add DPTF based Fan controlSumeet Pawnikar
This adds DPTF based Fan speed control for CML based Hatch system. BUG=None BRANCH=None TEST=Built and tested fan speed with different temperatures Change-Id: I3c2a679dc67eecb17098ce0f0c9703c679473a2d Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31980 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-28google/oak: Delete rowanEvan Green
Rowan board is dead, dissect it out of Oak. Signed-off-by: Evan Green <evgreen@chromium.org> BUG=chromium:840888 BRANCH=none TEST=emerge-oak coreboot chromeos-bootimage CQ-DEPEND=CL:1538915,CL:*1087044 Change-Id: Ifb19fa0cd814853270847bc14fc21c841d905146 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32061 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-28mb/google/hatch: Initialize FPMCU_PCH_BOOT1Shelley Chen
In the latest hatch schematics, BOOT1 for the FP MCU is now connected to the AP. Configuring it to be the same as BOOT0. BUG=b:126455006 BRANCH=None TEST=./util/abuild/abuild -p none -t google/hatch -x -a -c max Change-Id: Ibb451983674a7d812dc562cb8addb1dc50fb155c Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32060 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-27mb/mainboard/google/hatch/variants: Set tcc_offset valueSumeet Pawnikar
Set tcc_offset value to 10C. It configures the Thermal Control Circuit (TCC) activation value to 90C. This prevents any abrupt thermal shutdown by taking early thermal throttling action when CPU temperature goes above 90C. Change-Id: Ifee0fcc326530622b04e60af0f3b9cb9e3aea7ea Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31984 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-27mb/google/poppy/variants/rammus: Support new onboard Micron memoryKane Chen
Add micron_dimm_MT52L256M32D1PF-107 for new onboard memory support. BUG=none BRANCH=firmware-rammus-11275.B TEST=emerge-rammus coreboot chromeos-ec chromeos-bootimage Flash FW to DUT, and make sure system boots up. Signed-off-by: YanRu Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: Iaec4147a64313dcd461affb492805c0453e8703d Reviewed-on: https://review.coreboot.org/c/coreboot/+/32046 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-27mb/google/hatch: Add GPIO_A8 for Pen detect functionDtrain Hsu
Add GPIO_A8 for pen detect function. BUG=b:122765828 TEST=flash BIOS and using switch to verify GPIO_A8 value change. Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: Ie7c888ea61dd61e60c1d184565bd95e6b03777be Reviewed-on: https://review.coreboot.org/c/coreboot/+/31815 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-27mb/google/octopus/variants: Remove bipEvan Green
Remove bip, as it is no longer actively developed, and its EC overflowed storage, so the EC build is no longer viable. BUG=b:129283539 BRANCH=none TEST=emerge-octopus coreboot chromeos-bootimage CQ-DEPEND=CL:1538819,CL:*1086038 Signed-off-by: Evan Green <evgreen@chromium.org> Change-Id: Ie9ffa704af3523908858d382e2c188422323550e Reviewed-on: https://review.coreboot.org/c/coreboot/+/32053 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-27chromeos: update old boards to use lb_add_gpios notationJoel Kitching
Instead of manually filling out the lb_gpios struct, use the newer lb_add_gpios notation, which is more compact and less error-prone. BUG=b:124141368 TEST=util/lint/checkpatch.pl -g origin/master..HEAD TEST=util/abuild/abuild -B -e -y -c 50 -p none -x BRANCH=none Change-Id: I90795f32be5de881c94519933f36127098c184df Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32031 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-27vboot: deprecate physical dev switchJoel Kitching
Currently only two devices make use of physical dev switch: stumpy, lumpy Deprecate this switch. If these devices are flashed to ToT, they may still make use of virtual dev switch, activated via recovery screen. BUG=b:124141368, b:124192753, chromium:942901 TEST=util/lint/checkpatch.pl -g origin/master..HEAD TEST=util/abuild/abuild -B -e -y -c 50 -p none -x TEST=make clean && make test-abuild BRANCH=none Change-Id: I87ec0db6148c1727b95475d94e3e3f6e7ec83193 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31943 Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-25vboot: remove VBOOT_EC_SLOW_UPDATE Kconfig optionJoel Kitching
This option has been relocated to depthcharge: https://crrev.com/c/1524806 BUG=b:124141368, b:124192753 TEST=Build and deploy to eve TEST=util/lint/checkpatch.pl -g origin/master..HEAD TEST=util/abuild/abuild -B -e -y -c 50 -p none -x TEST=make clean && make test-abuild CQ-DEPEND=CL:1524806 BRANCH=none Change-Id: Ib4a83af2ba143577a064fc0d72c9bc318db56adc Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31909 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-25gale: add dev switch back as physical presence GPIOJoel Kitching
gale has a button which is essentially used as a "physical presence" button. Its only use is to emulate ^D or ^U on boot when the button is pressed. (See depthcharge src/board/gale/board.c) Previously (and currently in CrOS firmware branch) this GPIO was defined as the physical developer switch, and read as such in depthcharge. It was removed in cleanup patch CB:18980. Add the GPIO back as physical presence ("presence"), which will be read by depthcharge in CL:1532492. BUG=b:124141368, b:124192753, chromium:942901 TEST=util/lint/checkpatch.pl -g origin/master..HEAD TEST=util/abuild/abuild -B -e -y -c 50 -p none -x TEST=make clean && make test-abuild BRANCH=none Change-Id: Ic144f839b7f9933d573db8f84c4bf5905eea96f6 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31993 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-03-25mainboard/google/sarien: skip tpm check when !verstageJett Rink
The TPM driver isn't loaded in other stages but verstage so when we try to communicate with the TPM it fails. We don't need to communicate with it anyway since the TPM won't continue to tell us that recovery was requested, only the first query responds with the recovery request. BRANCH=none BUG=b:129150074,b:123360379 TEST=1)boot arcada without recovery and notice that the "tpm transaction failed" log lines are no longer present. 2) boot into recovery using the ESC refresh power key combination and verify that the recovery reason was "recovery button pressed" Change-Id: I13284483d069ed50b0d16b36d0120d006485f7f4 Signed-off-by: Jett Rink <jettrink@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32030 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Keith Short <keithshort@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-03-22mb/google/poppy/variants/atlas: DPTF tuning v2Puthikorn Voravootivat
We have more test data now so update the DPTF accordingly. * Change passive temp to 50/57/55/52 C * Change critical temp to 75C * All interval to 20 secs BUG=b:113101335 TEST=temp/perf looks better in thermal chamber test. Change-Id: I872c3f1875d0cbac148c44c449954e6871c9d0b0 Signed-off-by: Puthikorn Voravootivat <puthik@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32018 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-22mb/google/hatch: Enable FP MCUShelley Chen
AP communicates with FP MCU through gspi1. BUG=b:126455006 BRANCH=None TEST=ensure during bootup we see spi id spi-PRP0001:01 in dmesg FP MCU fw is not ready yet, so not much testing to be done yet. Signed-off-by: Shelley Chen <shchen@google.com> Change-Id: I2eba205d5e63664dca684fbd849454c5a2fe0d0e Reviewed-on: https://review.coreboot.org/c/coreboot/+/32017 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-22mb/google/hatch: Add overridetree to hatch variantShelley Chen
Add serialio settings to hatch. Only applies to CML. BUG=b:128347800 BRANCH=None TEST=abuild Change-Id: I6a9ec778d74cd48a2e1c79f8e669a9a6a6a9477d Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32003 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-22mb/google/octopus: Add keyboard backlight support for bloogTony Huang
Bloog supports keyboard backlight feature, so enable the ASL code. BUG=b:127736039 BRANCH=octopus TEST=Build and boot bloog, verify that the string 'KBLT' is in the DSDT. Change-Id: Iba66aade090816ea2376cae4baf4aae019cc97f4 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31981 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2019-03-22arch/mips: Fix <arch/mmio.h> prototypesKyösti Mälkki
These signatures need to be consistent across different architectures. Change-Id: Ide8502ee8cda8995828c77fe1674d8ba6f3aa15f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31995 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-03-22mb/google/hatch: Add SX9310 SAR0 sensorEvan Green
Add SAR0, which is an SX9310. The schematics and layout have a second SAR1 sensor provisioned on I2C4, with an interrupt of GPP_A6, but this is not populated. Signed-off-by: Evan Green <evgreen@chromium.org> BUG=b:128540461 BRANCH=none TEST=Boot kernel with sx9310 driver, see it come up happily Change-Id: I63943cc7da5ff56f6ef6dcbd99bb8f8f031e8bf7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/31998 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Enrico Granata <egranata@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-22mb/google/hatch: Enable HUNG_TASK wake interruptEvan Green
Enable the HUNG_TASK as a wakeup host event, as it's used by S0ix failure detection to wake the system back up if a suspend to S0ix never asserted S0_SLP#. BUG=b:123716513 BRANCH=None TEST=Test S0ix on Hatch with appropriate EC and kernel changes. Signed-off-by: Evan Green <evgreen@chromium.org> Change-Id: I447211892df210af97e8df0380bab032b14cbee8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32004 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-21grunt: Mark RW_LEGACY as CBFSMathew King
Depthcharge is changing how the RW_LEGACY CBFS is handled for alternate bootloaders, see https://crrev.com/c/1528550 and https://crrev.com/c/1530303. This means that RW_LEGACY must be marked as CBFS in the fmap in order to work. All boards except for kahlee(grunt) have CBFS marked. BUG=b:128703316 TEST=Build and ran on grunt along with chromium patches on grunt and was able to list alternate bootloader with ctrl+l BRANCH=none Change-Id: I843d565a9503d27e666a34e59aba263ec490c81f Signed-off-by: Mathew King <mathewk@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32019 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-21vboot: remove VBOOT_EC_EFS Kconfig optionJoel Kitching
This option has been relocated to depthcharge: https://crrev.com/c/1523248 BUG=b:124141368, b:124192753, chromium:943511 TEST=Build and deploy to eve TEST=util/lint/checkpatch.pl -g origin/master..HEAD TEST=util/abuild/abuild -B -e -y -c 50 -p none -x TEST=make clean && make test-abuild CQ-DEPEND=CL:1523248, CL:1525647 BRANCH=none Change-Id: I8b3740c8301f9a193f4fce2c6492d9382730faa1 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31897 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-21soc/intel/cannonlake: Assign FSP UPDs for HPD and Data/CLK of DDI portsKrishna Prasad Bhat
Assign the FSP UPDs for HPD and DDC of DDI ports. FSP assumes that all DDI ports are enabled and hence configures the HPD and CLK for DDI ports. This patch initializes only the required UPDs to enable display ports. BUG=b:123907904 TEST=DP devices working correctly. Change-Id: Ic0c172cd3d087fc8f49b01ab23feffdababf7166 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31520 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-21mb/*/chromeos.c: Be explicit about code for ramstageKyösti Mälkki
Motivation is to reduce use of !__PRE_RAM__, it does not mean ENV_RAMSTAGE but we also exclude ENV_SMM with the change. Change-Id: I1f96bb8c055a3da63274e1ab7f7d4bc70867cbf1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31930 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-03-21mb/google/sarien: Add SKU for boards with signed ECDuncan Laurie
To support both boards with the same firmware add a SKU for each variant that is used to include the proper EC firmware image to match what the EC is expecting. BUG=b:119490232 TEST=tested by faking the EC response to ensure that the OS and firmware update tools are able to determine the correct model based on the value returned by the EC. Change-Id: Iaa677975e0bccbee5ec8a39821fe1637f08270fa Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32002 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-20src: Use 'include <string.h>' when appropriateElyes HAOUAS
Drop 'include <string.h>' when it is not used and add it when it is missing. Also extra lines removed, or added just before local includes. Change-Id: Iccac4dbaa2dd4144fc347af36ecfc9747da3de20 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31966 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-03-20google/mistral: Implement board resetsanthosh hassan
Implement reset using PSHOLD. Change-Id: I472bf73cc7b227187b284a3730ec5dea5373695c Signed-off-by: Santhosh Hassan <sahassan@google.com> Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31827 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-20mistral: qcs405: copy calibration data to CBMEMNitheesh Sekar
This patch adds support to copy the wifi calibration data to CBMEM so that the depthcharge can use it to populate the data into wifi dt node. Change-Id: Ia8184e48a7176bb3b52e4d43866b7d065952c13e Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30714 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-19mb/google/hatch: Log EC events during S0ix resumeV Sowmya
This change adds support for logging EC events during S0ix resume. BUG=b:124131938 BRANCH=none TEST=Verified that the wake events are logged during the S0ix resume: 4 | 2019-03-05 07:55:27 | System Reset 5 | 2019-03-05 07:55:27 | Chrome OS Developer Mode 6 | 2019-03-05 07:56:54 | S0ix Enter 7 | 2019-03-05 07:57:09 | S0ix Exit 8 | 2019-03-05 07:57:09 | Wake Source | Power Button | 0 9 | 2019-03-05 07:57:09 | EC Event | Power Button Change-Id: I624f94c29bc66dbf4d9e1fec573d259985260ed3 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31789 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-19src: Drop unused 'include <cbfs.h>'Elyes HAOUAS
Change-Id: If5c5ebacd103d7e1f09585cc4c52753b11ce84d0 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31953 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-03-18mb/google/hatch: Set hatch to use SOC_INTEL_COMETLAKEShelley Chen
Move these configs to Kconfig.name as well. BUG=b:127310803 BRANCH=None TEST=emerge-hatch coreboot chromeos-bootimage Change-Id: I793363740fa0730a1e9e1aa7a9fa82d2789334b4 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31852 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-03-18mainboard/google/mistral: Add support for MistralNitheesh Sekar
Adding a new board variant 'Mistral' based on qcs405 soc. TEST=build Change-Id: I7ecfad68bb50f42acf36f51bc3433add56597c3d Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29949 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-18soc/intel/common: Update ESPI disable optionDuncan Laurie
Update the Kconfig option for disabling ESPI SMI source to disable it entirely, not just when ACPI mode is disabled. For the situations where this is needed (just the sarien board) it is better to completely stop the EC from sending any SMI events as no actions are taken. Change-Id: Id94481bb2f0cfc948f350be45d360bfe40ddf018 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31918 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-18mb/google/sarien: Enable BT RkfillLijian Zhao
Add bluetooth Rfkill function to recover the Bluetooth controller in cases where itself has entered a bad state and needs to be recovered. Bug=b:123342945 TEST=Boot up into OS and dump SSDT table, check there's _DSD entry under Bluetooth devices with GPIO in. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: Ibbe67887227af42b6c040deade7bf5da4ce3227f Reviewed-on: https://review.coreboot.org/c/coreboot/+/31765 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-18mainboard/google/kahlee: Don't use AMD's secure OSMartin Roth
Disable the use of AMD's Secure OS through the Kconfig option. BUG=chromium:903833 TEST=Build google/aleena, verify types 02, 0c, 0d are removed from PSP directory table Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: Iabb0632eef88170dde45dea2e2e15b54b3a06f7b Reviewed-on: https://review.coreboot.org/c/coreboot/+/31890 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2019-03-16x86/smbios: Untangle system and board tablesNico Huber
We were used to set the same values in the system and board tables. We'll keep the mainboard values as defaults for the system tables, so nothing changes unless somebody overrides the system table hooks. Change-Id: I3c9c95a1307529c3137647a161a698a4c3daa0ae Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29477 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-03-16src: Drop unused '#include <halt.h>'Elyes HAOUAS
Change-Id: Ie7afe77053a21bcf6a1bf314570f897d1791a620 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-03-15mb/google/hatch: Enable TBMC deviceDtrain Hsu
This change enables tablet mode ACPI device for all hatch boards. BUG=b:125355874 Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: I4d3818497172828d750b34fe91cbb6cc65e69fc5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/31869 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-14mb/google/kahlee/aleena: Add EC_ENABLE_TBMC_DEVICEEdward Hill
Enable ACPI TBMC notification on tablet mode change to support convertible Aleena devices. BUG=b:124132058 BRANCH=grunt TEST=evtest shows tablet mode events Change-Id: Iaf8ef031d4660f0791b5f664880437e6dfa58dc8 Signed-off-by: Edward Hill <ecgh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31893 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2019-03-14mb/google/arcada: Update USB2 port6 AFE settingLijian Zhao
Accoriding to 574354, we need to tune each port to pass eye diagram other than just use recommanded setting as they are base guidence only. Bug=b:124407280 TEST=Build and boot up on arcada board. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I587695809b368edd33852c4241de097ca31e9d66 Reviewed-on: https://review.coreboot.org/c/coreboot/+/31632 Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-14mb/google/hatch: Define GPP_C13 as EC_SYNC_IRQPhilip Chen
BUG=b:125933998 CQ-DEPEND=CL:1510513 BRANCH=None TEST=manually verify on hatch, chromeos-ec interrupt count increases Signed-off-by: Philip Chen <philipchen@google.com> Change-Id: I1dd38ca5aed1e0ddecb4738910cbfa92de33d315 Reviewed-on: https://review.coreboot.org/c/coreboot/+/31814 Reviewed-by: Enrico Granata <egranata@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-14mb/google/hatch: fix RCompResistor[0] valueShelley Chen
From doc#573387 CML System Memory DQ DQS Rcomp Mapping Information User Guide, RCompResistor[0] should be 121. BUG=b:122959294 BRANCH=None TEST=emerge coreboot and make sure boots up Change-Id: If69e7fb41e79d88d21b0e50fb65107a1686d696a Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31868 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-14mb/google/hatch: Update DRAM IDsShelley Chen
Update Hatch DRAM IDs to use the new DRAM ID assignment for general spds: 0 = 4G 2400 1 = 4G 2666 2 = 8G 2400 3 = 8G 2666 4 = 16G 2400 5 = 16G 2666 BUG=b:122959294 BRANCH=None TEST=emerge coreboot and make sure boots up Change-Id: Ic47737ce37597318bb794b63a47ced2467d8bbb0 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31862 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-14mb/google/hatch: Use MEM_CH_SEL to indicate single_channel skuShelley Chen
MEM_CH_SEL is used to indicate whether we are on a single or dual channel device, where MEM_CH_SEL = 1 for single channel skus and MEM_CH_SEL = 0 for dual channel skus. Initialize single_channel field (from GPP_F2), which will in turn initialize MemorySpdPtr pointers in cannonlake soc code. In the first build, we did not use GPP_F2, so we need to add an internal pulldown as those early devices were all dual channel devices. BUG=b:123062346, b:122959294 BRANCH=None TEST=Boot into current boards and ensure that we have 2 channels as expected Also, verify that GPP_F2 is set to 0. Change-Id: I89d022793580be603a93d0b177d73ce968529b5c Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31358 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-14mb/google/octopus: Create Bloog variantTony Huang
This commit create bloog variant for Octopus. Initial settings are copy from meep. Remove I2C tuning, WACOM digitizer and WEIDA touchscreen. Override GPIO configuration for unused LTE and Pen. BUG=b:127736039 BRANCH=octopus TEST=None Change-Id: I1d04c97cb0622075a25825ba2c835d556c8b0423 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31860 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2019-03-14mb/google/hatch: Query the EC for board versionIvy Jian
The board version is part of EC's EEPROM, select Kconfig items to enable requesting the EC for board version. BUG=b:128385395 TEST=Verified the mainboard version is from EC's EEPROM. Change-Id: I4bc1cac43c6cf73522f3a4bee89cc000a430d996 Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31858 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-14mb/google/arcada: add Kconfig option to enable WLAN SARCasper Chang
Enable WLAN SAR power table. BUG=b:123552641 TEST=Verified WLAN SAR power table forllows VPD setting Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com> Change-Id: I882b1c7ed0b1142a84eb338142e1c984df45eeba Reviewed-on: https://review.coreboot.org/c/coreboot/+/31859 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-03-13mb/google/hatch: Provide DRAM part number from EEPROMFurquan Shaikh
This change reads DRAM part number from EEPROM if available and returns it using the SoC callback (mainboard_get_dram_part_number). BUG=b:127609572 TEST=Verify that DRAM part number from EEPROM is added to DMI table 17 (dmidecode -t 17). Change-Id: I6ade6999828b6d67aa78d04199138f195a97ba8c Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31851 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-03-13src: Drop unused 'include <arch/ioapic.h>'Elyes HAOUAS
Change-Id: I1341f90230f318ac81a4aea24872ff272adad1eb Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31856 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-12src: Drop unused 'include <arch/acpigen.h>'Elyes HAOUAS
Use <arch/acpi.h> when appropriate. Change-Id: I05a28d2c15565c21407101e611ee1984c5411ff0 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31781 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-03-11mb/google/hatch: Add Hatch_whl boardShelley Chen
Adding Hatch_whl as a variant of hatch. This is a snapshot of the WHL version of hatch so that we can rebuild the bios images for Hatch with WHL SoC. BUG=b:127310803 BRANCH=NONE TEST=./util/abuild/abuild -p none -t google/hatch -x -a make sure HATCH_WHL is built as well. Change-Id: I24510fa226878582a61f1846f0b56a2c65204a92 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31824 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-11mb/google/hatch: Enable audio supportSathya Prakash M R
Following changes are done to enable audio support on hatch 1. Enable I2C4 device at 400Khz at 1.8V 2. Configure GPIO for HP INT and SPKR_PA_EN 3. Add ACPI entry for RT5682 and MAX98357A 4. Enable I2S0 and I2S1 lines 5. Enable generic max98357a driver in Kconfig BUG=b:123738217 BRANCH=none TEST=Check SSDT table for RT5682 & MAX98357a entry. Verify audio using Sound Open firmware (SOF) Change-Id: I93f3917c19cc3f0f8fd7b5e1b4d9b24a59f45f84 Signed-off-by: Sathya Prakash M R <sathya.prakash.m.r@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31280 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-08coreboot: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX)Julius Werner
This patch is a raw application of find src/ -type f | xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g' Change-Id: I6262d6d5c23cabe23c242b4f38d446b74fe16b88 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-08mb/google/hatch: Create hatch_whl variantShelley Chen
In preparation for the transition of hatch from WHL to CML, we are creating a checkpoint called hatch_whl that we can use for creating firmware compatible with the WHL hatch variant. BUG=b:127310803 BRANCH=NONE TEST=NONE Change-Id: Iecae584ee6feefcf29955a4720e9c24bdc8abe6d Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31795 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-08mb/google/hatch: Initialize all gpiosShelley Chen
BUG=b:123490912 BRANCH=None TEST=flash BIOS and make sure hatch boots up properly Change-Id: I9e41f0b38703f2c7a2b5a7ac9b108f8f10070004 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31724 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-07src: Drop unused include <timestamp.h>Elyes HAOUAS
Change-Id: I7e181111cd1b837382929071a350b94c3afc1aaa Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31784 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-03-07mainboard/google/kahlee: Add additional Micron MT40A512M16TB-062E:J SPD for ↵Kevin Chiu
variants BUG=b:127394249 BRANCH=master TEST=emerge-grunt coreboot chromeos-bootimage Change-Id: Ibb4beddf186233fd82ec8f3a01bf14d00b1352ff Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31778 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-06mb/google/poppy/variants/nami: Use Pantheon VBTJohn Su
Add new Pantheon sku-id for loading vbt-pantheon.bin BUG=b:78663963 BRANCH=firmware-nami-10775.B TEST=Boots to OS and display comes up. Change-Id: Icd56905e1e04de6f307393ae23f741b93ff23a4c Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31747 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-06mb/google/sarien: add ish firmware_variant field to _DSDJett Rink
We want to publish "arcada_ish.bin" as the fw name for Integrated Sensor Hub (ISH) so the kernel shim loader code can use it to construct the correct path in /lib/firmware/intel for the firmware load process. BUG=b:122722008 TEST=Verify that shim loader CLs use new value when constructing firmware path Change-Id: I6299de82566a3bad8521f8158bb047d5c1ff0cf8 Signed-off-by: Jett Rink <jettrink@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31683 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-06Remove DEFAULT_PCIEXBAR aliasKyösti Mälkki
The other DEFAULT_ entries are just immediate constants. Change-Id: Iebf4266810b8210cebabc814bba2776638d9b74d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31758 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-03-05mainboard: Enable PRESERVE flag in all vboot/chromeos FMD filesHung-Te Lin
For Chrome OS (or vboot), The PRESERVE flags should be applied on following sections: RO_PRESERVE, RO_VPD, RW_PRESERVE, RW_ELOG, RW_NVRAM, RW_SMMSTORE, RW_VPD, RO_FSG (b:116326638), SI_GBE (chromium:936768), SI_PDR (chromium:936768) With the new PRESERVE flag, we don't need RO_PRESERVE and RW_PRESERVE in the future. But it's still no harm to use it if there are multiple sections all needing to be preserved. BUG=chromium:936768 TEST=Builds google/eve and google/kukui inside Chrome OS source tree. Also boots successfully on eve and kukui devices. Change-Id: I6664ae3d955001ed14374e2788d400ba5fb9b7f8 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31709 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-03-05mb/google/sarien/variants/arcada: Add GPIO H15 to enable BTCasper Chang
Follow b:123342945 to add GPIO H15(BT_RADIO_DIS#). BUG=b:123342945 TEST=Verified BT function on Arcada DVT1 system Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com> Change-Id: I260a2312d47385da3c7ec215267ff63ada04f2c5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/31705 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-03-05mb/google/octopus: Add 6GB dual-channel memory configurationSeunghwan Kim
Add 6GB dual-channel memory configuration for future use. BUG=b:124634885 BRANCH=octopus TEST=emerge-octopus coreboot Change-Id: I36d6c704ac6708b29cc570a2209eeb32de6148b3 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31460 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-04device/mmio.h: Add include file for MMIO opsKyösti Mälkki
MMIO operations are arch-agnostic so the include path should not be arch/. Change-Id: I0fd70f5aeca02e98e96b980c3aca0819f5c44b98 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31691 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-04arch/io.h: Drop unnecessary includeKyösti Mälkki
Change-Id: I91158452680586ac676ea11c8589062880a31f91 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31692 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-04arch/io.h: Add missing includesKyösti Mälkki
Fixes indirect includes that would break with followup work. Change-Id: I37ca01b904a0b422a4d09475377e755e167a6ab3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31697 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-27 04:21:59 +0000