| Age | Commit message (Expand) | Author |
|---|
| 2018-10-10 | mb/google/octopus: Drop I2C bus 0 clock frequency for Phaser | peichao.wang |
| 2018-10-10 | mb/google/poppy/variants/nami: Add samsung_dimm_K4AAG165WB-MCRC SPD | Chris Zhou |
| 2018-10-10 | mb/google/kahlee/variants/*/devicetree.cb: Reset I2C slaves | Richard Spiegel |
| 2018-10-10 | mb/google/kahlee: Add delan variant | Martin Roth |
| 2018-10-10 | mb/google/fizz: Prepare sharing directory for variants | David Wu |
| 2018-10-09 | mb/google/kahlee/variants/liara: Update H1/TP/TS i2c timings | Chris Zhou |
| 2018-10-08 | mainboard/google/kahlee: Set PSPP setting to BalancedHigh | Akshu Agrawal |
| 2018-10-08 | Move compiler.h to commonlib | Nico Huber |
| 2018-10-08 | mb/google/octopus: Enable DRAM_PART_NUM_IN_CBI feature for Bobba | Pan Sheng-Liang |
| 2018-10-08 | mb/google/poppy/variant/nocturne: correct wifi wake register | Nick Vaccaro |
| 2018-10-08 | mb/google/poppy/variant/nocturne: Disable WAKE# signal | Nick Vaccaro |
| 2018-10-06 | soc/intel/common, mb/google, mb/siemens: Use lower case x for RXD | Furquan Shaikh |
| 2018-10-06 | mb/google/poppy/var/ampton: Get rid of min board id for DRAM in CBI | Furquan Shaikh |
| 2018-10-06 | mb/google/octopus/variants/fleex: Disable I2C0 in devicetree | Furquan Shaikh |
| 2018-10-06 | mb/google/octopus: Disable I2C3 in devicetree | Furquan Shaikh |
| 2018-10-06 | mb/google/poppy/variants/nocturne: Add DMIC properties to ACPI DSD | Furquan Shaikh |
| 2018-10-05 | mb/google/octopus: adjust Bobba I2C CLK under 400KHz | Pan Sheng-Liang |
| 2018-10-05 | mb/google/poppy/variants/nautilus: Change SlowSlewRate settings for LTE sku | Seunghwan Kim |
| 2018-10-05 | atlas: control touchscreen power using ACPI | Caveh Jalali |
| 2018-10-04 | mb/google/kahlee: Don't set stapm parameters | Martin Roth |
| 2018-10-04 | google/grunt: Correctly extract OEM string from CBFS | Kevin Chiu |
| 2018-10-04 | mb/google/poppy/variant/nocturne: update GPIO configuration | Nick Vaccaro |
| 2018-10-04 | mb/google/poppy/variant/nocturne: increase touchscreen reset delay | Nick Vaccaro |
| 2018-10-04 | mb/google/poppy/variants/rammus: Shorten oem_table_id to RAMMUS | marxwang |
| 2018-10-04 | mb/google/octopus: Enable DRAM_PART_NUM_IN_CBI feature for Fleex | Ivy Jian |
| 2018-10-04 | mb/google/nocturne: Define GPP_D17 as EC_SYNC_IRQ | Duncan Laurie |
| 2018-10-03 | mb/google/kahlee: Update careena Audio/TP i2c timing | Kevin Chiu |
| 2018-10-03 | google/kahlee: Enable IOMMU device | Marc Jones |
| 2018-10-01 | mb/google/octopus: Operate touchpad I2C CLK in spec | Chris Zhou |
| 2018-10-01 | google/kahlee: Run FCH PTS and WAK methods | Marshall Dawson |
| 2018-09-28 | mainboard/google/poppy/variants/rammus: Modify VR setting | statham_chu |
| 2018-09-28 | soc/intel/cannonlake: Update UPD from device switch | Lijian Zhao |
| 2018-09-28 | src/*: normalize Google copyright headers | Patrick Georgi |
| 2018-09-26 | mb/google/poppy/variants/nocturne: Update PowerLimit1 maximum value | Sumeet Pawnikar |
| 2018-09-26 | mb/google/poppy/variants/nocturne: Add tdp_pl1_override value | Sumeet Pawnikar |
| 2018-09-26 | mb/google/poppy/variants/nocturne: Update DPTF settings | Puthikorn Voravootivat |
| 2018-09-26 | cheza: Wrap FMAP sections with calibration data in RO_PRESERVE section | Julius Werner |
| 2018-09-26 | mb/google/octopus: Touchpad I2C CLK (405.25KHz)over spec(＜400KHz) | peichao.wang |
| 2018-09-26 | Revert "mb/google/poppy/variants/nautilus: Set grip sensor threshold" | Seunghwan Kim |
| 2018-09-26 | mb/google/octopus: Close unused I2C bus 7 include SCL and SDA for Phaser | Peichao Wang |
| 2018-09-25 | mainboard/google/kahlee: Only read a single vendor from oem.bin | Martin Roth |
| 2018-09-25 | mb/google/kahlee/variants/liara: Disable NbP-state on Liara | Amanda Huang |
| 2018-09-24 | soc/amd/stoneyridge/romstage.c: Move STAPM code to SOC specific | Richard Spiegel |
| 2018-09-21 | mb/google/octopus: Create ampton variant | Justin TerAvest |
| 2018-09-21 | mb/google/poppy/variants/rammus: Disable command TriState for rammus | marxwang |
| 2018-09-21 | google/kukui: Set up EC_IN_RW GPIO for ChromeOS | Tristan Shieh |
| 2018-09-21 | mb/google/poppy/variant/nocturne: set DMIC1 to NC | Nick Vaccaro |
| 2018-09-21 | mainboard/google/kahlee: allow oem.bin file to update smbios | Martin Roth |
| 2018-09-21 | mb/google/octopus/variants/fleex: Update DPTF parameters | Sumeet Pawnikar |
| 2018-09-20 | mb/google/zoombini: Use Chrome EC BOARDID definition | Karthikeyan Ramasubramanian |
| 2018-09-20 | ec/google/chromeec: Update google_chromeec_get_board_version prototype | Karthikeyan Ramasubramanian |
| 2018-09-20 | mb/google/poppy/variants/nocturne: Update DPTF settings | Puthikorn Voravootivat |
| 2018-09-20 | mb/google/octopus: Enable DRAM_PART_NUM_IN_CBI feature for meep | Wisley Chen |
| 2018-09-18 | mb/google/kahlee/variants/careena/devicetree.cb: Set STAPM values | Richard Spiegel |
| 2018-09-18 | mainboard/google/kahlee: Set EMMC reset pin to output low | Martin Roth |
| 2018-09-18 | mainboard/google/kahlee: Don't set global subsystem IDs | Martin Roth |
| 2018-09-17 | mb/google/kahlee/variants/baseboard: Set STAPM percentage | Richard Spiegel |
| 2018-09-17 | google/buddy: Add board as variant of google/auron | Matt DeVillier |
| 2018-09-17 | google/auron: Clean up variant-specific romstage code | Matt DeVillier |
| 2018-09-16 | google/kukui: Configure EMMC | Tristan Shieh |
| 2018-09-16 | mb/google/poppy/variants/rammus: fix S0ix entering issue | Zhuohao Lee |
| 2018-09-16 | google/kukui: Notify EC that AP is in S0 | Hung-Te Lin |
| 2018-09-16 | mb/google/poppy: Set UPD CmdTriStateDis for Atlas | Caveh Jalali |
| 2018-09-14 | mb/google/octopus: Query the EC for board version | Karthikeyan Ramasubramanian |
| 2018-09-14 | mb/google/octopus: fetch DRAM part number from CBI for phaser after DVT phase | peichao.wang |
| 2018-09-12 | mainboards: Add SMMSTORE region in chromeos configs | Patrick Georgi |
| 2018-09-12 | rammus: add SPD mapping for rammus and shyvana support | kane_chen |
| 2018-09-10 | mb/google/poppy/variants/nami: Add SPD for two memory parts | Ren Kuo |
| 2018-09-10 | mainboard/google/poppy/variants/rammus: Enable DA7219 | marxwang |
| 2018-09-10 | mb/google/poppy: Set UPD CmdTriStateDis for Nocturne | Shaunak Saha |
| 2018-09-09 | drivers/vpd: Add VPD support | Patrick Rudolph |
| 2018-09-09 | mainboard/google/kahlee: Reset trackpad & touchscreen | Martin Roth |
| 2018-09-07 | mb/google/poppy/variants/atlas: enable NVMe | Caveh Jalali |
| 2018-09-06 | mb/google/octopus: Configure H1 interrupt pad using Rx level config | Furquan Shaikh |
| 2018-09-06 | mainboard/google/poppy/variants/rammus: Enable GSPI clock for bus 0. | kane_chen |
| 2018-09-06 | mb/google/poppy/variants/nocturne: Enable DMIC CLK0/DATA0 | Sathyanarayana Nujella |
| 2018-09-06 | mb/google/poppy/variants/nautilus: Bump VCC_SA voltage offset 75mV | Seunghwan Kim |
| 2018-09-06 | mb/google/octopus: Enable TBMC device | Amanda Huang |
| 2018-09-05 | mainboard/google/kahlee: Enable the BCLK buffer | Martin Roth |
| 2018-09-04 | mb/google/poppy/variants/rammus: add sku info into smbios table | Zhuohao Lee |
| 2018-09-02 | mb/google/poppy/Kconfig: Fix missing device node /dev/tpm0 for H1 | Zhuohao Lee |
| 2018-09-02 | mainboard/google/kahlee/var/liara: Enable Synaptics touchpad device | Crystal Lin |
| 2018-08-31 | google/cheza: Adjust FMAP to fit new requirements | Julius Werner |
| 2018-08-31 | mb/google/kahlee/variants/liara: Update Audio/H1/TP i2c timings | Chris Zhou |
| 2018-08-30 | mb/google/poppy/variants/nautilus: Set grip sensor threshold | Seunghwan Kim |
| 2018-08-30 | mb/google/octopus: Add missing IOstandy settings. | Shamile Khan |
| 2018-08-29 | mainboard/google/kahlee: Enable EC firmware update screen | Martin Roth |
| 2018-08-28 | mb/google/octopus/variants/meep: Add weida touchscreen support | Tony Huang |
| 2018-08-28 | soc/intel/cannonlake: Change LPDDR4 to MEMCFG | Lijian Zhao |
| 2018-08-28 | google/kukui: Init SPI bus for EC | Tristan Shieh |
| 2018-08-28 | google/kukui: Set up GPIOs for ChromeOS | Tristan Shieh |
| 2018-08-28 | google/grunt: Reset BayHub EMMC freq to SD base CLK 50MHz | Kevin Chiu |
| 2018-08-27 | mb/google/poppy/variants/atlas: Update DPTF parameters | Todd Broch |
| 2018-08-27 | mb/google/poppy/variants/nocturne: Update DPTF parameters | Todd Broch |
| 2018-08-27 | mb/google/octopus/variants/baseboard: Update DPTF parameters | Sumeet Pawnikar |
| 2018-08-27 | mb/google/kahlee: Fix I2C bus 0 timing for Grunt | Akshu Agrawal |
| 2018-08-27 | update all FADT version 3.0 to use the get tables function | Marc Jones |
| 2018-08-27 | mb/google/octopus: add Digitizer and Synaptics Touchpad for bobba | Pan Sheng-Liang |
| 2018-08-23 | mb/google/poppy/variants/nocturne: enable "Base Attached Switch" device | Dmitry Torokhov |
| 2018-08-23 | mb/google/octopus: Add null pointer check | John Zhao |
