summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Expand)Author
2014-01-12CBFS: use cbfs_get_file_content whenever possible rather than cbfs_get_fileVladimir Serbinenko
2014-01-10Replace all occurences of sprintf with snprintfVladimir Serbinenko
2013-12-24Remove PCI_ROM_RUN optionVladimir Serbinenko
2013-12-23Coding style: punctuation cleanup [1/2].Idwer Vollering
2013-12-21exynos5420: Configure the UART pins unconditionallyGabe Black
2013-12-21exynos5250: Implement support to boot with USB A-A firmware uploadJulius Werner
2013-12-21snow: Set up the i2s0 pins during bootGabe Black
2013-12-21armv7/exynos: Fix and remove memory reset workaroundsHung-Te Lin
2013-12-21Pit: graphicsRonald G. Minnich
2013-12-21kirby is dead. long live the arm pit.Stefan Reinauer
2013-12-21pit: update PMIC write sequence in romstageDavid Hendricks
2013-12-21snow: TPS69050 -> TPS65090David Hendricks
2013-12-21kirby: pit: Fix up wakeup_need_resetGabe Black
2013-12-21pit: Get rid of the mostly unnecessary exynos5420.hGabe Black
2013-12-21kirby: Clean some cruft from mainboard.cGabe Black
2013-12-21kirby: Neutralize wakeup.c and delete the mostly unused exynos5420.hGabe Black
2013-12-21Add a kirby board which is mostly a copy of pitGabe Black
2013-12-21Exynos 5420: Enable dynamic CBMEMStefan Reinauer
2013-12-21Exynos 5250: Enable dynamic CBMEMStefan Reinauer
2013-12-21google/pit: disable SYSMMU for graphicsRonald G. Minnich
2013-12-21Refactor code containing aux callsFurquan Shaikh
2013-12-21Slippy/Falco: Fill in right values for PHSYNC and PVSYNC in transcoder flagsFurquan Shaikh
2013-12-21Add cpu transcoder attribute to intel dpFurquan Shaikh
2013-12-21Calculate transcoder flags based on pipe configFurquan Shaikh
2013-12-21peppy: Set optimal DTLE register valuesShawn Nematbakhsh
2013-12-21slippy/falco/peppy: Fix EC wake events in S5Duncan Laurie
2013-12-21falco: Force enable ASPM on PCIe Root Port 1Duncan Laurie
2013-12-21falco: Disable unused clocksDuncan Laurie
2013-12-21falco: Enable EC controlled throttlingDuncan Laurie
2013-12-21falco: Drive GPIO59/LTE_DISABLE_L low on S3/S5Duncan Laurie
2013-12-21pit: Add missing elements to the edid data structureGabe Black
2013-12-21pit: Bump the EC SPI bus speed up to 5 MHzGabe Black
2013-12-21falco: add rtd2132 settings to device treeAaron Durbin
2013-12-21Pit: set PWM to external on ParadeRonald G. Minnich
2013-12-21Pit: move parade writes to mainboard.cRonald G. Minnich
2013-12-21peppy: Drive WLAN_DISABLE_L / BT_ON low in S3 and S5.Shawn Nematbakhsh
2013-12-21FUI: Fill in link_m and link_n valuesFurquan Shaikh
2013-12-21Slippy: remove unneeded code in i915io.cRonald G. Minnich
2013-12-21slippy/falco/peppy: Route USB to XHCI on resumeDuncan Laurie
2013-12-21haswell boards: fix SATA interrupt in ACPIDuncan Laurie
2013-12-21slippy/falco/peppy: update ACPI C-state settingsDuncan Laurie
2013-12-21lynxpoint me: add support for mbp clear wait in finalize stepDuncan Laurie
2013-12-21Revert "lynxpoint: Move ME lock down to ramstage"Duncan Laurie
2013-12-21SLIPPY: final changes for FUIRonald G. Minnich
2013-12-21peppy: Duplicate SPD data for 2GB configurations.Shawn Nematbakhsh
2013-12-21haswell boards: Use PECI temp sensor id 0Duncan Laurie
2013-12-21falco: Enable RTD2132 spread spectrum at 1.0%Duncan Laurie
2013-12-21bolt: make the gpio interrupts edge sensitiveAaron Durbin
2013-12-12bolt: Initial mainboard commitDuncan Laurie
2013-12-12HDA: Enable Mini-HDA and fix up PCH-HDA initDuncan Laurie
2013-12-12slippy/falco/peppy: make GPIO interrupts be edge triggeredDuncan Laurie
2013-12-12falco: drive WLAN_DISABLE_L low in S3 and S5Aaron Durbin
2013-12-12exynos5420: Setup clocks for MMC bus controller.Hung-Te Lin
2013-12-12peppy: Add backward-compatible RAM_ID table.Shawn Nematbakhsh
2013-12-12Peppy: Update Realtek ALC283 verb tableMartin Roth
2013-12-12falco: fix usb port settingsDuncan Laurie
2013-12-12falco: Remove thermal thresholds that use CTDPDuncan Laurie
2013-12-12PIT: remove a comment that is incorrect.Ronald G. Minnich
2013-12-12snow: Fix the edid data structure definition so depthcharge works again.Gabe Black
2013-12-12peppy: RAM_ID + storage changes for next build.Shawn Nematbakhsh
2013-12-12peppy: Disable audio codec enable GPIO in S3 + S5.Shawn Nematbakhsh
2013-12-07peppy: Enable power limiting for thermal controlDuncan Laurie
2013-12-06butterfly: Fix build without ChromeOSKyösti Mälkki
2013-12-05google/link: use the new edid functions when in FUI modeRonald G. Minnich
2013-12-05peppy: Disable forced dev mode.Shawn Nematbakhsh
2013-12-05Fix Makefile to include all copies of the SPD sourcesDuncan Laurie
2013-12-03slippy/falco/peppy: Fix Chrome OS GPIO export in ACPIDuncan Laurie
2013-12-03haswell boards: Enable VIRTUAL_DEV_SWITCHDuncan Laurie
2013-12-02Add option to disable ChromeOSKyösti Mälkki
2013-12-02haswell: Update pei_data to match ref codeDuncan Laurie
2013-12-02falco: Update panel power sequence timingsDuncan Laurie
2013-12-02peppy: Port updates from slippy/falco boardsDuncan Laurie
2013-12-02peppy: Add 2GB DRAM configuration.Shawn Nematbakhsh
2013-12-02peppy: Re-enable EC software syncShawn Nematbakhsh
2013-12-02peppy: Update GPIO table + USB port map.Shawn Nematbakhsh
2013-12-02Add description to MAINBOARD_VENDOR string so it can be overriddenDuncan Laurie
2013-12-02peppy: Add an inverted input GPIO typeShawn Nematbakhsh
2013-12-02falco/slippy: Fix DMIC nid verb.Dylan Reid
2013-12-01slippy/falco/peppy: Fix SPD GPIO initialization.Aaron Durbin
2013-12-01Butterfly: Force DDR refresh rate to 2x.Shawn Nematbakhsh
2013-11-26lynxpoint: Add an inverted input GPIO typeDuncan Laurie
2013-11-26google/parrot/smihandler.c: Use `battery_critical_logged` only with `ELOG_GSMI`Paul Menzel
2013-11-26slippy/falco: Re-enable EC software syncDuncan Laurie
2013-11-26falco: update verbs for ALC283Duncan Laurie
2013-11-25slippy: update verbs for ALC283Dylan Reid
2013-11-25peppy: Add Elipda DIMM SPDShawn Nematbakhsh
2013-11-25peppy: Initial mainboard commitShawn Nematbakhsh
2013-11-25falco: Update DIMM SPD tableDuncan Laurie
2013-11-25falco: Add panel power sequence timingsDuncan Laurie
2013-11-25falco: Add on-board devices and configure GPIO irq/wakeDuncan Laurie
2013-11-25slippy: Add on-board devices and configure GPIO irq/wakeDuncan Laurie
2013-11-25falco: Add Elpida DIMM SPDDuncan Laurie
2013-11-25smbios: Add generic type41 write functionDuncan Laurie
2013-11-25haswell: update pei_data data structureAaron Durbin
2013-11-25falco: Initial mainboard commitDuncan Laurie
2013-11-25slippy: Enable EC SMIDuncan Laurie
2013-11-25lynxpoint: Change SerialIO device enable reporting to ACPIDuncan Laurie
2013-11-25slippy: Minor vboot related fixesDuncan Laurie
2013-11-25Fix int15 return value for mainboard oprom handlersDuncan Laurie
2013-11-25lynxpoint: Move ME lock down to ramstageDuncan Laurie
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-01 04:22:19 +0000