| Age | Commit message (Collapse) | Author |
|---|
|
BUG=b:197479026
TEST=abuild -a -x -c max -p none -t google/brya -b nivviks
abuild -a -x -c max -p none -t google/brya -b nereid
Signed-off-by: Reka Norman <rekanorman@google.com>
Change-Id: I322a94569d8a63e8c0da68a8feb394ade4ce7999
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61440
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Fill in the memory config based on the the schematic and doc #573387.
BUG=b:197479026
TEST=abuild -a -x -c max -p none -t google/brya -b nivviks
abuild -a -x -c max -p none -t google/brya -b nereid
Change-Id: I6958c7b74851879dbea41d181ef8f1282bf0101d
Signed-off-by: Reka Norman <rekanorman@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61439
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
BUG=b:197479026
TEST=abuild -a -x -c max -p none -t google/brya -b nivviks
abuild -a -x -c max -p none -t google/brya -b nereid
Change-Id: I7ec4b9368e0a63c0c0c9a92c8367a89d57f10d51
Signed-off-by: Reka Norman <rekanorman@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61348
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Nissa doesn't have a SLP_S0_GATE signal, so we shouldn't generate the
related ACPI code. Therefore, move this behind a Kconfig which is
currently selected by the brya and brask baseboards.
BUG=b:197479026
TEST=Build brya0, check that there's no change to the generated dsdt.asl
Change-Id: I5a73c6794f6d3977cbff47aeff571154e41944cc
Signed-off-by: Reka Norman <rekanorman@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61347
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Fill in the nissa baseboard GPIO table based on the nivviks P0 and
nereid P0 schematics. Also, add an override GPIO table for each of
nivviks and nereid.
The differences between nivviks and nereid are:
- WFC: nivviks has a MIPI WFC and nereid has a USB WFC, so the
MIPI-related pins are overriden to NC on nereid.
- The DMIC pins and speaker I2S pins were swapped after nivviks P0. The
baseboard reflects the new configuration, which will be used in
nivviks P1 onwards, nereid, and future variants. For now, nivviks
overrides the pins to the old configuration. Once nivviks P1 is
released, this will need to be updated to handle both.
BUG=b:197479026
TEST=abuild -a -x -c max -p none -t google/brya -b nivviks
abuild -a -x -c max -p none -t google/brya -b nereid
Change-Id: Ic923fd22abcaf7da0c607f66705a6e16c14cf8f2
Signed-off-by: Reka Norman <rekanorman@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60995
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Let's re-enable PSP post codes when running PSP verstage. The original
reason we disabled POST codes was that it was causing problems during
eSPI init in bootblock. Since we now init eSPI in PSP verstage, it's
safe to re-enable them. We can now see post codes during S0i3 enter and
exit. This will help when debugging resume or suspend hangs.
Port 80 writes on suspend:
ef000020 ef00ed00 ef00ed01 ef000021 <--new
Port 80 writes on resume:
05 eea80025 eea90000 eea90100 eea90200 eea50000 eeae0000 eeae0004 eeaf0000 eeb00000 eec00000 eec00100 eec10000 eec40000 eec40500 eec40200 eefc0000 eefc0100 eec50000 ea00e0fc
ea00abc1 ea00e60b ea00e60c ea00abe1 ea00abe2 ea00abe4 ea00abe5 ea00abeb ea00abec ea00abed ea00abee ea00abef ea00e10f ea00e098 ea00e099 ea00abf0 ea00abf2 ea00e10e ea00e60c ea00e101
ea00e090 ea00e091 ea00e098 ea00e099 ea00e098 ea00e099 ea00e100 ea00e60c ea00e0b0 ea00e0b4 ea00e0b7 ea00e60c ea00e0c2 ea00e0c4 ea00e0d3 ea00e60c ea00e10d ea00e0c1 ea00e10c ea00e60c
ea00e0c4 e000 eec60000 eec20000 eec20800 b40000 eeb50000 eefc0000 eefc0300 ee070000 eed90000 eed90700 eeda0600 eedd0000 eecb0000 eecf0000 eecf0200 eee30000 eee30900 eee40000
ef000025
BUG=b:215425753
TEST=Boot/suspend/resume guybrush and verify post codes are printed
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ie759f66be2b8ffac19145491a227752d4762a5b9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61535
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
This patch enables SaGv since somehow it was accidently removed
by commit a52b9c3.
BUG=b:208719081
TEST=FW_NAME=vell emerge-brya coreboot
Fixes:a52b9c3 ("mb/google/brya: Move gpio_pm settings for brya
variants to baseboards")
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Change-Id: Ideae3dbd9746590db104d93afadbd8d574298b83
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61464
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch removes `lockable_brya_gpios` lists and
`mb_gpio_lock_config` override function from brya baseboard directory as
the variant GPIO pad configuration table is now capable of locking GPIO
PADs.
BUG=b:208827718
TEST=Able to built and boot brya.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ifc7354f2ae3817459b5494d572c603eba48ec66a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61503
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
This applies a configuration lock to the FPMCU SPI and IRQ GPIOs
for all brya and brask variants.
BUG=b:208827718
TEST=cat /sys/kernel/debug/pinctrl/INTC1055\:00/pins suggests `FPMCU_*`
(F11-F13 and F15-F16) are locked.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I1d0b8a5aed6ea54bcfaa267cae5ca78595396ce5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61502
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
This applies a configuration lock to the PCH write protect GPIO for
all brya and brask variants.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ia125c513c09ecbb1047100e72f8540369646988e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61501
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
This applies a configuration lock to the TPM IRQ pins for all brya
and brask variants.
BUG=b:208827718
TEST=cat /sys/kernel/debug/pinctrl/INTC1055\:00/pins suggests
GSC_PCH_INT_ODL is locked.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Icfc251152278c59f9a94b84fcd8c6d36c26bff62
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61500
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
This applies a configuration lock to the TPM I2C and IRQ GPIO for
all brya and brask variants.
BUG=b:208827718
TEST=cat /sys/kernel/debug/pinctrl/INTC1055\:00/pins suggests
I2C_TPM_SDL and I2C_TPM__SDA GPIO PINs are locked.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I4f2a7014faeecd4701ea35ec77ef0e1692516b9d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61499
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Use PAD config macro to add lock support for all the gpios used
in CB:58352 CB:58353.
BUG=b:211573253
TEST=Boot to OS, issue warm reboot and see no issue with any IP
enumeration
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Change-Id: I558bab39f935ab31a89541c6498a73af70cbf9ee
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60320
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Add supported memory parts in the mem_list_variant.txt and generate the
SPD ID for the parts. The memory parts being added are:
1. Samsung K4U6E3S4AA-MGCR
BUG=b:214460184
TEST=emerge-dedede coreboot
Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com>
Change-Id: Ief75fcb7a8f1c25feaf05b1535a9528a351b23b0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61105
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Galtic has a rare stability issue.
The symptom is display black screen while switching to secure mode,
normally it will occurred at the last step of factory side
and it'll follow by some specific SOCs.
Slowing the initial core display clock frequency down to 172.8 MHz
as per Intel recommend for short term solution for Gal series.
The CdClock=0xff is set in dedede baseboard, and we overwrite it as 0x0
(172.8 MHz) for Galtic.
BUG=b:206557434
BRANCH=dedede
TEST=Build firmware and verify on fail DUTs.
Check the DUTs can boot up in secure mode well.
Signed-off-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Change-Id: Ic059ab306f80a6d01f4b0a380a3b767d3245478d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61103
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Don't unconditionally override `DISABLE_HECI1_AT_PRE_BOOT`.
Change-Id: I7d447e73f672877c76eecea1eb8b8f41f89ce686
Fixes: commit a0d9ad322fe603d4d4cbccda9c7edcfbf0b13409
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61478
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Don't unconditionally override `IGNORE_IASL_MISSING_DEPENDENCY`.
Change-Id: I02081d0f04be4af9cd765aa3b29295af40f9ca99
Fixes: commit 28fa297901ffd158631cfc9f562f38119eff628e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61477
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Based on the agah schematic, add memory settings.
BUG=b:215662929
TEST=none
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: Ib45241d708d025ca75ed06e2bcf3997558723a62
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61313
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Create the crota variant of the brya0 reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:215443524
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_CROTA
Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com>
Change-Id: Ic8f1a0bde286d5d014dfdf87c2a417ca6ff8b3a3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61416
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
For one specific type of APU, it doesn't have HDMI. When we detect
this APU, we need to explicitly disable HDMI in DDI settings,
otherwise the system would freeze.
Please refer
src/mainboard/google/guybrush/variants/dewatt/variant.c
BUG=b:215432928
Change-Id: I93fca8cf9870533da1bcca5fa28ff22085e65beb
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61314
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
To timely update stylus charging status (b:206012072), PCHG device
events have been moved to MKBP. This patch registers the MKPB host
event as a wake-up signal to match the change.
EC filters other EC_MKBP_EVENT_* events (chromium:3413180).
BUG=b:205675485,b:206012072
Cq-Depend: chromium:3413180
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Change-Id: Ie4536b2c0ccc37f92dfa940c5a5712340a32c82c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61383
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add senor board to QUP FW load for: APPS I2C, ESIM SPI & fingerprint SPI.
BUG=b:182963902
TEST=Validated on qualcomm sc7280 development board.
Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org>
Change-Id: I6fdd09bb437547e6d12eb60c4b2917d2a3074618
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59556
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
IASL compiler check for usage of _CRS, _DIS, _PRS, and _SRS objects:
1) If _PRS is present, must have _CRS and _SRS
2) If _SRS is present, must have _PRS (_PRS requires _CRS and _SRS)
3) If _DIS is present, must have _SRS (_SRS requires _PRS, _PRS requires _CRS and _SRS)
4) If _SRS is present, probably should have a _DIS (Remark only)
IASL will issue a warning for each missing dependency.
Ignore this warnings for existing ASL code and issue a message when the build is complete.
Change-Id: I28b437194f08232727623009372327fec15215dd
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59880
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add supported memory parts in "mem_parts_used.txt" and generate
the SPD ID 0x04 for the parts.
Shuboz memory table as follow:
value Vendor Part number
0000 MICRON MT40A512M16TB-062E:J
0001 HYNIX H5AN8G6NCJR-XNC
0010 MICRON MT40A1G16KD-062E:E
0011 SAMSUNG K4AAG165WA-BCWE
0100 MICRON MT40A512M16TB-062E:R
BUG=b:216571906
BRANCH=zork
TEST=emerge-zork coreboot
Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com>
Change-Id: Ib0100456457adabed6fd6615e0873de2cf9acb98
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61373
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The EC_GOOGLE_CHROMEEC_ACPI_MEMMAP is intended for Chrome microchip ECs
only, which have different requirements as to the amount of memory
mapped space they can claim. The brya family of boards does not use
any microchip ECs, therefore remove this Kconfig.
BUG=b:214460174
TEST=boot brya4es to kernel, no EC errors seen in cbmem log, EC software
sync still works.
Change-Id: I6e9858f29d079140ec43341de90f222b03986edb
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61409
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Drawcia's MIPI camera sensor and VCM both share the same reset GPIO
from the PCH. The current power sequence does not take this into
account, and this leads to an unbalanced ref count of the reset GPIO,
which can cause one or the other of the devices to reset unexpectedly.
This patch corrects that by explicitly sequencing the reset GPIO for
both devices, which the builtin refcounting of this driver will
automatically handle.
BUG=b:214665783
TEST=Build, boot to OS and check VCM once camera stream off
Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com>
Change-Id: Ib676fd1f43dbd9cf75e4aff01baab4a4bb4e2a89
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61147
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Some SKUs of google/taniks have a Bayhub LV2 card reader chip,
therefore enable the corresponding driver for the mainboard.
BUG=b:215487382
TEST=Build FW and checking SD card reader register is correct.
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: I34adb122bd2edc343e894a53bc12e105f4225984
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61270
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
0x18 MICRON 4GB LP4X MT53E1G32D2NP-046 WT:B
0x19 HYNIX 4GB LP4X H54G56CYRBX247
0x1a SAMSUNG 4GB LP4X K4UBE3D4AB-MGCL
0x1b HYNIX 8GB LP4X H54G68CYRBX248
BUG=b:165768895
BRANCH=kukui
TEST=emerge-jacuzzi coreboot
Change-Id: Ib1c09ff2b88bf121de702985680b2388c0fb8427
Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61265
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add a dedicated memory mapping table starting at index 0x40:
0x40 SAMSUNG 4GB LP4X K4UBE3D4AA-MGCR
0x41 HYNIX 4GB QDP LP4X H9HCNNNCPMALHR-NEE
0x42 MICRON 4GB LP4X MT53E1G32D4NQ-046 WT:E
0x43 MICRON 4GB LP4X MT53E1G32D2NP-046 WT:A
0x44 MICRON 4GB LP4X MT53E1G32D2NP-046 WT:B
0x45 HYNIX 4GB LP4X H54G56CYRBX247
0x46 SAMSUNG 4GB LP4X K4UBE3D4AB-MGCL
0x48 SAMSUNG 4GB LP4X K4UBE3D4AA-MGCL
0x49 MICRON 8GB LP4X MT53E2G32D4NQ-046 WT:A
0x4A HYNIX 4GB QDP LP4X H9HCNNNCPMMLXR-NEE
0x4B Micron MT29VZZZAD9GQFSM
BUG=b:162379736
BRANCH=kukui
TEST=emerge-jacuzzi coreboot
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Change-Id: I97f296cb8c35fd2f979a05d0b97a0562c1b472f3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57442
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
When using the default initial core display clock frequency, Metaknight
has a rare stability issue where the startup of Chrome OS in secure mode
may hang. Slowing the initial core display clock frequency down to
172.8 MHz as per Intel recommendation avoids this problem.
The CdClock=0xff is set in dedede baseboard,and we overwrite it as 0x0
(172.8 MHz) for metaknight.
BUG=None
BRANCH=dedede
TEST=Build firmware and verify on fail DUTs.
Check the DUTs can boot up in secure mode well.
Change-Id: I987277fec2656fe6f10827bc6685d3d04093235e
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61327
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
|
|
Init basic override devicetree based on schematics
BUG=b:211891086
TEST=FW_NAME="volmar" emerge-brya coreboot chromeos-bootimage
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I40b364e3df2f04a6b828f4f288667b96b6e0bd22
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61299
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
|
|
Set tcc_offset value to 10 in devicetree for Thermal Control Circuit
(TCC) activation feature. This value is suggested by Thermal team.
BUG=b:214890058
BRANCH=None
TEST=build pass
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I86acb172ed427d45973b9360e0413978cbd46645
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61142
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add new ram_id:1100 for memory part K4AAG165WB-BCWE.
BUG=b:212507858
TEST=Generate new spd file and build coreboot.
Then boot from the DUT with new memory K4AAG165WB-BCWE
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Change-Id: I4e409a5a5a3b3d1b0013d2c020eeb4c0aeec51ba
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60191
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
This reverts commit 2bf2e6d1ccd87cdd8d9c189972eae89e47e542c8.
According to the latest schematics, Brask supports D3-Hot for RTL8125
and does not need to operate the ISOLATE pin.
BUG=b:193750191
BRANCH=None
TEST=emerge-brask coreboot chromeos-bootimage
Test with command suspend_stress_test
Change-Id: Ica6bfb810887861f6b17ff527373824547e2406c
Signed-off-by: Alan Huang <alan-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61023
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Set register "reset_delay_ms" to 20 to reduce power resume time.
BUG=b:204009580
TEST=tested on kano
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: Ib0695edd7c342c65df9138b1590281c5f442769b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61338
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Update Elan touchpad interrupt trigger to level low from edge low to keep consistency with Synaptics touchpad. Checked with Elan PM Iris and other projects(spherion), the touchpad can be set to edge or level low trigger.
Sepherion Elan touchpad IRQ setting: https://source.chromium.org/chromiumos/chromiumos/codesearch/+/main:src/third_party/kernel/v5.4/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi;l=415?q=mt8192-asurada.dtsi&ss=chromiumos%2Fchromiumos%2Fcodesearch:src%2Fthird_party%2Fkernel%2F
BUG=b:214143249
TEST=emerge-guybrush coreboot chromeos-bootimage; Tested Elan and Synaptics touchpad wakeup from s0i3 well with proto build.
Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Change-Id: Ifac49b131cadc1f8838bb6243ad6d17feb272bd2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61365
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
|
|
Update GPIO configuration to fix Synaptics touchpad can't wakeup system from s0i3.
BUG=b:214143249
TEST=emerge-guybrush coreboot chromeos-bootimage; Tested Synaptics touchpad wakeup from S3 with proto build.
Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Change-Id: I29734595d37283adc6fd4a0ed17f51a5c9061796
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61174
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
|
|
For one specific type of APU, it doesn't have HDMI. When we detect
this APU, we need to explicitly disable HDMI in DDI settings,
otherwise the system would freeze.
get_cpu_count() == 4 && get_threads_per_core() == 2: This case is for
2 Core and 4 Thread CPU (2C/4T for short).
get_cpu_count() == 2: This is for 2C/2T. This is for a possible future case.
BUG=b:208677293
Change-Id: I8d0fa96818a768b7960d92821b927dbc622675ae
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61260
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
|
|
Reference test document, update tuning registers from pass experiment
setting of phy_settings.
The document about eDP tuning can be gotten from the issue tracker of
this ticket, at the issue tracker b/203061533#comment6.
BUG=b:203061533
Change-Id: I7aa8c594d9f5caa6b2523dac079aef89e623c56f
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59919
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Huang <patrick.huang@amd.corp-partner.google.com>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Update DPTF settings provided by thermal team
BUG=b:215033682
TEST=build and tested on taniks board
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: Ic6860980b06e876dd4c21af26752ab6c1a3f7fff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61337
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Taniks is going to exchange i2c port for touchscreen and cr50.
BUG=b:215039999
TEST=emerge-brya coreboot
Cq-Depend:chromium:3397562
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: I179949887f6d8f4bbdff7d806319e2ac368ebc2c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61169
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Taniks will use two PCIE port signals with one slot, one CLK and one
CLKREQ at next build. In order to accommodate this, probe statements
are added to the devicetree. This only affects NVME SSD and EMMC.
BUG=b:215040000
TEST=Build FSP with debug output enabled, and observe the correct root
ports being initialized depending on the FW_CONFIG values for BOOT_EMMC
and BOOT_NVME.
Cq-Depend:chromium:3397561
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: I2ead505088f19fd3bf9768b541838395c82ef051
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61170
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Since Tiger Lake platform, the HECI1 device can be disabled on
Alder Lake platform using two different mechanism:
A. Using PMC IPC command 0xA9.
B. Sending SBI message under SMM.
In current scope of Alder Lake the default implementation is using
(B) sending sbi message under SMM. A follow up patch to add the
possible options and let platform to choose the applicable one.
List of changes:
1. Drop `HeciEnabled` from dt and dt chip configuration.
2. Replace all logic that disables HECI1 based on the `HeciEnabled`
chip config with `DISABLE_HECI1_AT_PRE_BOOT` config.
3. Default enable HECI1 device in `chipset.cb` to ensure the HECI1
device can undergo the PCI enumeration and later based on the
mainboard policy the HECI1 device can be disabled.
Mainboards that choose to make HECI1 enable during boot don't override
`DISABLE_HECI1_AT_PRE_BOOT` config.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ie673e634fbc0bdece419c379d417b08dfb4819e2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60731
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Enable EC keyboard backlight for volmar.
BUG=b:211891086
TEST=FW_NAME=volmar emerge-brya coreboot chromeos-bootimage
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I24ec7c8ca770cb438aabcf16b252032eef6d734d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61298
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
|
|
Update initial gpio configuration for volmar
BUG=b:211891086
TEST=FW_NAME=volmar emerge-brya coreboot
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I1bd3f1b3807b546d5a827ac89f0dc9bc8aaec40a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61206
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
|
|
Add I2C bus for banshee in Kconfig
BUG=b:214871796
TEST=emerge-brya coreboot
Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com>
Change-Id: I67592051b367d5a5715f8d1253ea0c11d2deb1c1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61312
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
Update override devicetree based on schematics
BUG=b:214871796
TEST=emerge-brya coreboot
Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com>
Change-Id: I05b63ebcded2f37dfb0f6c428e1fb993f476006a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61269
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
Change-Id: I624dd67b6ce9b87a6031b5467eacb9a8d7cda1cd
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61216
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Modify i2c signal to meet touchpad vendor spec.
Please see issue tracker for more details.
BUG=b:215487482
TEST=emerge-brya coreboot and check measured waveform in spec
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: Ib3797d4e232654ada97092d9f2742ca040d0f0e4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61271
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Like the variant function to change DXIO settings, add a similar weak
function to modify the DDI settings.
Currently we follow the old way. Later we will find out a better way
to avoid using weak function.
Change-Id: I9898d717bc3025ea1ddc3b0db41325083324ed57
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61140
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
|
|
BUG=b:198258604
BRANCH=guybrush
TEST=emerge-guybrush coreboot
WLAN works properly in OS
Change-Id: Ie1f295eaa57af7c2942e1807b3a0c4dcd89cd696
Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60265
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
We set T3 as 300ms to meet Elan's spec, but the resume/suspend times
are greater than 500ms, which is the spec for Chromebooks.
The actual kernel timing has been measured, and given the ACPI delay
after deasserting reset in addition to the delay until the kernel
driver accesses the device, delaying only 200ms in the ACPI method is
also sufficient to meet the 300ms requirement.
BUG=b:210772498
BRANCH=none
TEST=build and test touchscreen function on DUT.
TEST=suspend, wake DUT and check touchscreen function.
Signed-off-by: Scott Chao <scott_chao@wistron.corp-partner.google.com>
Change-Id: I4bb4eda09686cb59b6e19c741aa2b78d84332d2a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60270
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Camera LED blinks as sensor is being probed during kernel boot,
which misleads user to belive camera has been turned on.
Configure _DSC to ACPI_DEVICE_SLEEP_D3_COLD so that driver skips
initial probe during kernel boot and prevent privacy LED blink.
BUG=b:214155527
TEST=Build and boot Kano to OS. Verify entries in SSDT and monitor LED
during boot.
Signed-off-by: Jim Lai <jim.lai@intel.com>
Change-Id: I92f1e88d0fcce49660a95d4402c8c4161e320168
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61109
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
ALC5682-VD/ALC5682-VS use different kernel driver by different hid name.
Update hid name depending on the AUDIO_CODEC_SOURCE field of fw_config.
ALC5682-VD: _HID = "10EC5682"
ALC5682I-VS: _HID = "RTL5682"
BUG=b:210501484
BRANCH=puff
TEST=build
Change-Id: I84bc378d6b00828366309be7dbf56a61702a14da
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61191
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sam McNally <sammc@google.com>
|
|
Configure GPIOs according to schematics
BUG=b:214871796
TEST=emerge-brya coreboot
Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com>
Change-Id: Id6862ff442310953b4749cef7880814f3c3f6d60
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61201
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
Banshee will use SODIMM. Add memory.c to override baseboard.
BUG=b:208910227
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I4d2fe986b786b3553b67910b589fce12647ee69a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61192
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
MEMORY_SOLDERDOWN puts SPD in cbfs and read part number from CBI.
MEMORY_SODIMM puts SPD cache in FMAP.
BUG=b:208910227
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Idab48293fb5b584ecb4c8f270d2c376456954553
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61193
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Create the banshee variant of the brya0 reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:214871796
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_BANSHEE
Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com>
Change-Id: Ib4f943a109f945204a9b0a8de9b99580bf01c87e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61176
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
Add file gpio.c in romstage.
BUG=b:213828931
TEST=Build FW and system can power on normally.
Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com>
Change-Id: Ie868fe7ada9deb8918d6c7ba538332cbe539ee44
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61173
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
BUG=b:211528578
TEST=emerge-cherry coreboot
Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Change-Id: I3bd9803b4e47882df9fe351229478e4cb1630363
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60313
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Present the Semtech SX9360 SAR sensor that protects the LTE antenna.
The sensor is connected to i2c bus I2C1.
BUG=b:194318328
BRANCH=dedede
TEST=emerge-dedede coreboot
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Change-Id: I9feef9d132c60738bafb22ceb7d3468c798fab9b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59609
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The latest schematics changes the TPM I2C from I2C3 to I2C1. This patch
turns on I2C1 and turns off I2C3.
BUG=b:211886429
TEST=Test if proto 1 can boot into Chrome OS successfully.
Signed-off-by: Alan Huang <alan-huang@quanta.corp-partner.google.com>
Change-Id: I0e94c900b48adf10880aae2abb47e08d1bd9e19b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61135
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
|
|
In https://crrev.com/c/3069716, the samus EC firmware was removed from
the `main` branch, therefore in order to update the `chromeec` 3rdparty
submodule, the automatic build and inclusion of samus EC firmware into
coreboot's `master` branch has to be dropped as well.
Change-Id: I6fcdd3b7925b6ec33ba48892ed750c29bb60634c
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61118
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Along with commit f94405219c (soc/intel/alderlake: Hook up FSP-S CPU
PCIe UPDs), we need to set cpu pcie rp flags in devicetree now.
This CL is to add proper cpu pcie flags (PCIE_RP_LTR and PCIE_RP_AER) in
all intel projects or system will be blocked at PKGC2R with root port
LTR not enable.
BUG=b:214009181
TEST=Build and DUT (Kano) can enter deeper PKGC state normally.
Signed-off-by: Tracy Wu <tracy.wu@intel.corp-partner.google.com>
Change-Id: I0d8721bf1454448b7fc14655f0e4513001469a18
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61073
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Some SKUs of google/taeko4es have a Bayhub LV2 card reader chip,
therefore enable the corresponding driver for the mainboard.
BUG=b:204343849
TEST=Build FW and checking SD card reader register is correct.
Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com>
Change-Id: I3d2ea3db9df38e7b0cac4c32e1fca579ff43e5bf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61115
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
When using the default initial core display clock frequency (648MHz),
Jasper Lake board might have a rare stability issue where the startup
of Chrome OS in secure mode may hang during re-initializing display in
kernel graphic driver.
Bugzzy didn't show this problem so far, but Intel recommends slowing
the initial core display clock frequency down to 172.8 MHz to prevent
this potential problem.
Depend on CL: https://review.coreboot.org/c/coreboot/+/60009
The CdClock=0xff is set in dedede baseboard, and we overwrite it as 0x0
(172.8 MHz) for bugzzy.
BUG=None
BRANCH=dedede
TEST=Build firmware and check the DUTs can boot up in secure mode well.
Change-Id: I592b2d7c814881074bd2fef9906f2450326c1fcd
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61022
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
This patch makes DISABLE_HECI1_AT_PRE_BOOT=y default for Cannon Lake
and ensures disable_heci1() is guarded against this config.
Also, makes dt CSE PCI device `on` by default.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Idd57d2713fe83de5fb93e399734414ca99977d0c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60725
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This reverts commit bcd7873ea80be0ee576a10e6a11b7dcf8294ffb5.
Reason for revert: It makes beadrix can't boot to os without depthcharge change. The depthcharge change related with fw_config and will effect other variants.
================ error log ================
...
Starting depthcharge on Beadrix...
src/vboot/util/flag.c:50 flag_install(): Gpio already set up for flag 5.
===========================================
BUG=b:204882915
BRANCH=None
TEST=Build and boot into OS.
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Change-Id: Id5e76fc78a56d30caf9f805a8a430f176a653bbe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60849
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Raymond Chung <raymondchung@ami.corp-partner.google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Henry Sun <henrysun@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds memory part used by variant beadrix to
mem_part_used.txt and generates DRAM ID allocated to the part.
BUG=b:204882915, b:210123929
BRANCH=None
TEST=Run part_id_gen to generate SPD id
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Change-Id: Ibff150bb4e742f32641da661cfca6594d18c52e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60242
Reviewed-by: Raymond Chung <raymondchung@ami.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Configure GPIOs according to schematics
BUG=b:210970640
TEST=emerge-brya coreboot
Change-Id: Icfd1e09761e51aca9c23f3ab340adac7a66a3ada
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60891
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
List of changes:
1. Drop `HeciEnabled` from dt and dt chip configuration.
2. Replace all logic that disables HECI1 based on the `HeciEnabled`
chip config with `DISABLE_HECI1_AT_PRE_BOOT` config.
3. Make dt CSE PCI device `on` by default.
4. Mainboards set DISABLE_HECI1_AT_PRE_BOOT=y to make Heci1
function disable at pre-boot instead of the dt policy that uses
`HeciEnabled = 0`.
Mainboards that choose to make HECI1 enable during boot don't override
`heci1 disable` config.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I5c13fe4a78be44403a81c28b1676aecc26c58607
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60722
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Adding this host event to the EC SCI event and wake masks allows
the system to generate an SCI and/or wake when this event happens.
BUG=b:206012072
TEST=build
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Change-Id: I4f48244a4fca750a9de2ecc20f24786034d45b8a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61072
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The redrix thermal team has determined that the TCC circuit trip
temperature should be set to 97C, therefore, because the offset
is subtracted from 100C, set the `tcc_offset` register in the
devicetree to 3.
BUG=b:200134784
TEST=build and verified by thermal team
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Change-Id: Ifb63d63bc741b2a402328f256b43bc83e0a88a9e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61003
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The anahera thermal team has determined that the TCC circuit trip
temperature should be set to 97C, therefore, because the offset
is subtracted from 100C, set the `tcc_offset` register in the
devicetree to 3.
BUG=b:214088543
TEST=build and verified by thermal team
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Change-Id: I25b8a3d9e5fe28e9497b735c50a09994092b2243
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61002
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
After kernel change landed on Chromium tree.
https://lore.kernel.org/r/20210407065555.88110-5-heikki.krogerus@linux.intel.com
USB driver will use PLD to match the Type-C port. PLD needs to start
from 1.
BUG=b:214460183
TEST=boot into OS without kernel panic.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I1493e46f8881b2f688f41f32755d4cf5a87e7656
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61108
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
https://github.com/thesofproject/linux/pull/3271
Felwinter will use the OEM string for SOF tplg loading. Update the name
that match to the kernel driver.
BUG=b:210061842
TEST=dmidecode can show AUDIO_AMP-MAX98360_ALC5682VS_I2S_2WAY.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Ib6114d047762ba26071c9cdc6c43d80f933c1eb9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61070
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
DDR interfaces emit electromagnetic radiation which can couple to the
antennas of various radios that are integrated in the system, and cause
radio frequency interference (RFI). The DDR Radio Frequency Interference
Mitigation (DDR RFIM) feature is primarily aimed at resolving narrowband
RFI from DDR4/5 and LPDDR4/5 technologies for the Wi-Fi high and
ultra-high bands (~5-7 GHz). This patch sets CnviDdrRfim UPD and enables
CNVI DDR RFIM feature for brya0 variant.
Refer to Intel doc:640438 and doc:690608 for more details.
BUG=b:201724512
BRANCH=None
TEST=Build and boot with debug FSP and verify CnviDdrRfim UPD value.
Change-Id: I6ad826d0039e400f219c2d407c51762c1751a909
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60740
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
ADL support USB4/TBT. Select it will reserve PCI buses and hotplug mem
and prefetch mem.
BUG=b:206739931
TEST=build PASS.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I1171981c1318c2ecb65ba7959c4de9b5e179514e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60885
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
List of changes:
1. Drop `HeciEnabled` from dt and dt chip configuration.
2. Replace all logic that disables HECI1 based on the `HeciEnabled`
chip config with `DISABLE_HECI1_AT_PRE_BOOT` config.
Mainboards that choose to make HECI1 enable during boot don't override
`heci1 disable` config.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ib9fb554c8f3cfd1e91bbcd1977905e1321db0802
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60728
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
List of changes:
1. Drop `HeciEnabled` from dt and dt chip configuration.
2. Replace all logic that disables HECI1 based on the `HeciEnabled`
chip config with `DISABLE_HECI1_AT_PRE_BOOT` config.
Mainboards that choose to make HECI1 enable during boot don't override
`heci1 disable` config.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I4a81fd58df468e2711108a3243bf116e02986316
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60730
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Init basic override devicetree based on initial schematics
BUG=b:210970640
TEST=emerge-brya coreboot
Change-Id: I7b7badacce27dd7da4f138c6f2465af518715e7f
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60837
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
verstage_mainboard_espi_init in mb/guybrush/verstage.c still accesses
some of the registers directly.
BUG=b:183149183
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2f48d1c62b48866d8d942f1586bcb72017b8dd72
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60983
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Add the UPD PcieRpSlotImplemented as devicetree option. To keep the PI
bit set for any slots of already existing boards, add set the option
PcieRpSlotImplemented=1 where appropriate.
Change-Id: Ia6f685df3c22c74ae764693329a69817bf3cd01d
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60946
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The patch adjusts CSE region's internal partitions' (CSE RO and Data
partition) sizes to match with sizes of MFIT generated CSE Region's
internal partitions.
BUG=b:213993778
TEST=Generate coreboot for Brya and verify with MFIT generated
coreboot.
Cq-Depend: chrome-internal:4452789
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I5418c02f83134814e3f9959ee8c8da32ce8c7bec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60951
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch ensures all brya variants with Alder Lake ESx SoC
are using NEM by default for CAR set up.
Default CAR configuration for QS SoC is eNEM.
BUG=b:168820083
TEST=Able to build and boot brya0 variant using eNEM mode.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ib04bec188bdfde67c408fcd6b0603a5c2fb0fc97
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61001
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
Per customer spec, change ELAN touch HID from ELAN9050 to ELAN9008.
BUG=b:214010928
TEST=touch screen is functional.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Ia95fdb378aaf241e38c0beb8ec392d57d77dc4db
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61027
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In order to avoid having the FSP fail to detect the SSD device
downstream of the RP, its PERST# must be deasserted earlier in
the boot flow, therefore move PERST# deassertion to a romstage
GPIO table.
BUG=b:213828931
TEST=Build FW and run stress exceed 1000 cycles.
Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com>
Change-Id: I4e5eed7db16e1420ccbc22a5c30b00bedd190a2d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60956
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
During certain kind of test scenario, observed that CPU temperature
spikes till 98C and based on current thermal critical policy
temperature threshold of CPU set to 98C, it initiates the system wide
abrupt shutdown.
To avoid this kind of abrupt system shutdown, update cpu critical
temperature threshold from 98C to 105C.
BUG=b:213476881
BRANCH=glados
TEST=Built and booted on glados
Change-Id: I56df9285b3c247866a5bfa6dc59d1856544de41c
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60974
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Puthikorn Voravootivat <puthik@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Override GPIO pad configurations based on the beadrix's schematic.
BUG=b:204882915
BRANCH=None
TEST=Built test coreboot image
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Change-Id: I53fc8088ff8ebb2790ac8cd68186cf9de908b414
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60245
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Based on the beadrix's schematic, generate memory settings.
BUG=b:204882915, b:210123929
BRANCH=None
TEST=Built test coreboot image
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Change-Id: I935581fbf21be4820b03a608ea5bd60b1c000baa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60244
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The factory versions (minor version 22) of cr50 FW have an issue with
producing short interrupt pulses, which can be missed by the ADL PCH
if autonomous GPIO power management is enabled, therefore instead of
continually adding the setting to all the variants, move it to the
baseboard instead.
Change-Id: I337f1e9e8f958c02bb73e6701a06c0b88a4757d7
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60872
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
According to H/W schematics,
fingerprint, SD controller, WWAN/LTE and PEN modules are not stuffed and hence the following GPIOs are marked as not connected:
GPIO_3 : TP247
GPIO_4 : TP218
GPIO_5 : TP220
GPIO_8 : TP245
GPIO_11: TP244
GPIO_17: TP194
GPIO_18: TP195
GPIO_21: TP243
GPIO_24: TP196
GPIO_31: TP50
GPIO_42: TP219
GPIO_69: TP217
GPIO_115: TP235
GPIO_116: TP205
GPIO_140: TP226
GPIO_142: TP225
GPIO_144: TP227
BUG=b:204155627
TEST=emerge-guybrush coreboot chromeos-bootimage
Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Change-Id: I552fd6af1cd827e4e41be1a954bf95c3afbb6a86
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60782
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
ALC5682I-VS codec will be used in EVT, replacing ALC5682I-VD.
BUG=b:211835769
TEST=emerge-guybrush coreboot chromeos-bootimage; HW reworked a proto MB with ALC5682I-VS, build and check "i2cdetect -r -y 2", dmesg.
Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Change-Id: Ib1a82285b60c6d5d474ead8643a826e36f56f5b6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60959
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bhanu Prakash Maiya <bhanumaiya@google.com>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Add supported memory parts in mem_parts_used.txt, and generate
SPD id for these parts.
MT53E512M32D1NP-046 WT:B (Micron)
MT53E1G32D2NP-046 WT:B (Micron)
H54G46CYRBX267 (Hynix)
H54G56CYRBX247 (Hynix)
K4U6E3S4AB-MGCL (Samsung)
K4UBE3D4AB-MGCL (Samsung)
BUG=none
TEST=build pass
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: Ic5b45ec83d0d7e0e1d16cb1afae501f06ee1f36a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60962
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Move the `configure_pmc_descriptor()` function to SoC scope instead of
having two identical copies in mainboard scope. Add a Kconfig option to
allow mainboards to decide whether to implement this workaround.
Change-Id: Ib99073d8da91a93fae9c0cebdfd73e39456cdaa8
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60940
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sheng Lean Tan <sheng.tan@9elements.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Copy the `is_descriptor_writeable()` function from the `intel/adlrvp`
mainboard and use it in the `configure_pmc_descriptor()` function. With
this change, this function is now identical for both mainboards.
Change-Id: I2ff39682ed98c6b8bc60cc2218f36f4934b9903c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60939
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sheng Lean Tan <sheng.tan@9elements.com>
|
|
Adjust the cosmetics of the `configure_pmc_descriptor()` function to
match the code for the `intel/adlrvp` mainboard. The only difference
is that adlrvp checks if the descriptor is writable.
Tested with BUILD_TIMELESS=1, Google Brya0 remains identical.
Change-Id: I9c524d5c422c765db200a15f484c2b8827ebd40b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60938
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sheng Lean Tan <sheng.tan@9elements.com>
|
|
Restructure the code in the `configure_pmc_descriptor()` so that it
matches the code for the `intel/adlrvp` mainboard. This change does
not reindent the contents of the original if-block intentionally as
this will be taken care of in a reproducible follow-up.
Change-Id: I8c9d9087cb2d0668f6a4afbb566d830bb9febd89
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60937
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sheng Lean Tan <sheng.tan@9elements.com>
|
|
More Brya variants like Brya0 and Taeko have migrated to use
Alder Lake QS SoC which enables eNEM feature by default. Hence,
select eNEM for CAR by default for these variants.
BUG=b:168820083
TEST=Able to build and boot brya0 variant using eNEM mode.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I63be166c8e428f052999fe29c8ebe1238e1a12ec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60912
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
Change-Id: I67fc65c5e01bb134e2e3068dc6da03de1183f785
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60623
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
