summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Collapse)Author
2016-11-18google/chromeec: Add common infrastructure for boot-mode switchesFurquan Shaikh
Instead of defining the same functions for reading/clearing boot-mode switches from EC in every mainboard, add a common infrastructure to enable common functions for handling boot-mode switches if GOOGLE_CHROMEEC is being used. Only boards that were not moved to this new infrastructure are those that do not use GOOGLE_CHROMEEC or which rely on some mainboard specific mechanism for reading boot-mode switches. BUG=None BRANCH=None TEST=abuild compiles all boards successfully with and without ChromeOS option. Change-Id: I267aadea9e616464563df04b51a668b877f0d578 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17449 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner <jwerner@chromium.org>
2016-11-17google/snappy: Update DPTF settingsWisley Chen
1. Update DPTF CPU/TSR1/TSR2 passive/critial trigger points. CPU passive point:100, critical point:105 TSR1 passive point:48, critial point:65 TSR2 passive point:85, critial point:100 2. Update PL1/PL2 Min Power Limit/Max Power Limit Set PL1 min to 3W, and max to 6W Set PL2 min and max to 8W 3. Change thermal relationship table (TRT) setting. The TRT of TCHG is TSR1, but real sensor is TSR2. BRANCH=master BUG=none TEST= Compiled, verified by thermal team. Change-Id: Ib197c36eca88e3d05f632025cf3c238e1a2eae23 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/17426 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-17mainboard/google/reef: disable unused devicesJagadish Krishnamoorthy
The following devices i2c6, i2c7, spi1, spi2, uart3 are not used. BUG=chrome-os-partner:59880 TEST=Boot to OS and lspci command should not list the above disabled devices. Change-Id: I819cdb34709703e6431b49446417ed9d6b3543cd Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Reviewed-on: https://review.coreboot.org/17441 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-17mainboard/google/reef: set i2c bus timings by rise/fall timesAaron Durbin
Provide the rise and fall times for the i2c buses and let the library perform the necessary calculations for the i2c controller registers instead of manually tuning the values. BUG=chrome-os-partner:58889,chrome-os-partner:59565 Change-Id: I0c84658471d90309cdbb850e3128ae01780633af Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17397 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-11-17google/gru: Move to one CA training patternDerek Basehore
This changes memory to only do CA training with one pattern, 0xfffff/0x00000 and to also make sure CA training waits for all of the captures during training. BRANCH=none BUG=chrome-os-partner:56940 TEST=boot kevin and run stressapptest -M 1500 -s 1000 Change-Id: I0982674b4f4415f4d7865923ced93fa09bdd877e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 75cdd911cea9c4e5744fd04505b260fa5755513c Original-Change-Id: I3b86e6d4662c6fbbf9ddef274fce191a367904e5 Original-Signed-off-by: Derek Basehore <dbasehore@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/410320 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/17383 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-17google/gru: Add new CA training patternDerek Basehore
This adds a new CA training pattern for all of the supported frequencies. This pattern increases the hold time on CA. BRANCH=none BUG=chrome-os-partner:57845 TEST=boot kevin and run: while true; do sleep 0.1; memtester 500K 1 > /dev/null; done for several hours Change-Id: Ie5958cf67c16247ef90ee261da9faef4ffa5b339 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8babeafe75bffcb2dab17eb007b4f5bb0eb42606 Original-Change-Id: I7f7652f88e43dc9b2f6069e60514931bf7582ed1 Original-Signed-off-by: Derek Basehore <dbasehore@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/403547 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/17382 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-17google/oak: Add more DRAM modules supportPH Hsu
Add support for following 3 modules. - Micro MT52L256M32D1PF / MT52L512M32D2PF - Hynix H9CCNNNBJTALAR Hana EVT was planed to add 4 DRAM modules but RAM_CODE=5 is not used in the end. This patch also unifies the naming of the RAM configurations. BUG=chrome-os-partner:58983 TEST=verified on Hana EVT. Change-Id: I7dd44525de8e9dde01f210f4730fa8ccd4baef21 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 5dccd68149bcfd6fd0a83e310d43063bab645691 Original-Change-Id: I7c245c8c24be159e152f4f3cca25bf970b58425c Original-Signed-off-by: Milton Chiang <milton.chiang@mediatek.com> Original-Signed-off-by: PH Hsu <ph.hsu@mediatek.com> Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/402888 Original-Reviewed-by: Pin-Huan Hsu <ph.hsu@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Paris Yeh <pyeh@chromium.org> Reviewed-on: https://review.coreboot.org/17381 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-16mainboard/google/reef: Add proper DMIC endpoints based on DMIC config pinSathyanarayana Nujella
Reef board uses GPIO_17 as DMIC config pin. This pin distinguishes board with Quad DMIC's or Mono DMIC. This patch adds necessary DMIC endpoints to support either of those configurations. CQ-DEPEND=CL:*304339,CL:409774 BUG=chrome-os-partner:56918 BRANCH=none TEST=Verify Mono and Quad Channel DMIC record Change-Id: I5b2825b5f39f8962985a129f8ec65265fb18f0b2 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/17158 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-11-16google/eve: Fill out memory ID tableDuncan Laurie
Add the DIMM SPD data for memory types that are not used yet but are on the matrix and may be used in future builds. Also fix a typo in the part number string for one type. BUG=chrome-os-partner:58666 TEST=build and boot on eve p0 Change-Id: I20401d7afb69f1c3ae1a3b0d6e3ec9097f54ef96 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/17437 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-15google/link/i915.c: Fix build error when native gfx init enabledIru Cai
- Move members of struct edid to struct edid_mode - Change `u32 pmmio` to `u8 *pmmio` in i915_lightup_sandy Change-Id: Id64daf5eae1d4d8265105067b2e6ae55786a5638 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/17332 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-11-14google/chell : update DPTF policy settingsSumeet Pawnikar
Fine tuned DPTF policy values for chell device as below, 1. Increase Passive temperature value to 52 degree Celsius for TSR2. 2. Remove charger effect for TSR2. 3. Increase Minimum PowerLimit1 to 3W. 4. Reduce Maximum PowerLimit1 to 6W. BUG=chrome-os-partner:54718 BRANCH=None. TEST=Built for chell device. Change-Id: I46f69e3cd527ea3d28bdd7daa29d91f76770c277 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/17376 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-11mainboard/google/snappy: Configure PERST pinWisley Chen
Configure GPIO 122 as PERST. This is to assert WiFi PERST during s0ix entry. BUG=chrome-os-partner:59034 BRANCH=master TEST=emerge-snappy coreboot chromeos-bootimage Change-Id: If2528632fe65c3ed1af19b2ce6f99e8be0cd1ad9 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/17356 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-11google/snappy: update timing of sdmode togglingWisley Chen
Maxim98357a speaker amp requires BCLK & SFRM to be active and stable before it is unmuted. If there is a BLCK and no SFRM, it results in a pop sound. sdmode_delay property already exists which facilitates this configuration. This patch updates "sdmode_delay" to avoid pop sound. BUG=chrome-os-partner:59034 BRANCH=master TEST=emerge-snappy coreboot chromeos-bootimage Change-Id: Ic9095ae6812ba822c760229e69f5b27c6c244cdf Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/17361 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-11mainboard/google/snappy: Set PL1 override to 12000mWWisley Chen
Snappy is using APL SoC SKU's with 6W TDP max. As Reef, the energy calculation is wrong with the current VR solution. Experiments show that SoC TDP max (6W) can be reached when RAPL PL1 is set to 12W. Therefore, we've inserted 12W override after reading the fused value (6W) so that the system can reach the right performance level. BUG=chrome-os-partner:59034 BRANCH=master TEST=emerge-snappy coreboot chromeos-bootimage Change-Id: Idd702077cd05e2b43823542cb804b2d4b42f7116 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/17362 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-11soc/intel/skylake: move i2c voltage config to own variableAaron Durbin
In preparation of merging the lpss i2c config structures on apollolake and skylake move the i2c voltage variable to its own field. It makes refactoring things easier, and then there's no reason for a separate SoC specific i2c config structure. BUG=chrome-os-partner:58889 Change-Id: Ibcc3cba9bac3b5779351b673bc0cc7671d127f24 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17347 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-11-10mainboard/google/reef: Add digitizer device to devicetreeFurquan Shaikh
BUG=chrome-os-partner:56246 BRANCH=None TEST=Verified kernel is able to talk to the device. Even without the digitizer, no issues observed with the kernel. Change-Id: I894a5f4cd8f6a51e641a2c8f7b1f682ab76712ae Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17343 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-11-10mainboard/google/reef: Tune digitizer I2C frequency to 400kHzFurquan Shaikh
This brings the I2C frequency down to 400kHz which is spec for fast I2C. BUG=chrome-os-partner:56246 BRANCH=None TEST=Verified frequency in kernel. Change-Id: Ib83c57eec8644903cb9c4b2ab50c94038eb690c1 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17342 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-10drivers/i2c/wacom: Make the driver more genericFurquan Shaikh
Wacom I2C driver can be used by devices other than touchscreen. e.g. digitizer. So there is no need to name the driver with touchscreen specific attributes. Only a separate descriptor name is required that needs to be set by mainboard correctly. BUG=chrome-os-partner:56246 BRANCH=None TEST=Compiles successfully. Change-Id: I0d32a4adae477373b3f4c5f3abbe188860701194 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17341 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-10mainboard/google/pyro: Set PL1 override to 12000mWKevin Chiu
Pyro is using APL SoC SKU's with 6W TDP max. As Reef, the energy calculation is wrong with the current VR solution. Experiments show that SoC TDP max (6W) can be reached when RAPL PL1 is set to 12W. Therefore, we've inserted 12W override after reading the fused value (6W) so that the system can reach the right performance level. BUG=chrome-os-partner:58112 BRANCH=master TEST=emerge-pyro coreboot chromeos-bootimage Change-Id: I6de22d7b2d107f3d26ecfadd4e0904e68318e656 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/17335 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-10google/pyro: Tune i2c frequency to 400 KhzKevin Chiu
tune i2c devices clk for pyro: I2C0: audio da7219 I2C2: TPM H1 I2C3: wacom touchscreen I2C4: elan touchpad BUG=chrome-os-partner:58881 BRANCH=master TEST=emerge-pyro coreboot chromeos-bootimage Change-Id: If3c92ed260277c27a94d2fcf7883e9441519e40e Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/17331 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-10google/pyro: update timing of sdmode togglingKevin Chiu
Maxim98357a speaker amp requires BCLK & SFRM to be active and stable before it is unmuted. If there is a BLCK and no SFRM, it results in a pop sound. sdmode_delay property already exists which facilitates this configuration. This patch updates "sdmode_delay" to avoid pop sound. BUG=chrome-os-partner:58112 BRANCH=master TEST=emerge-pyro coreboot chromeos-bootimage Change-Id: I5aee41957c9de7a05f962d3ede74efc6998a78fc Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/17336 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-10mainboard/google/pyro: Configure PERST pinKevin Chiu
Configure GPIO 122 as PERST. This is to assert WiFi PERST during s0ix entry. BUG=chrome-os-partner:58112 BRANCH=master TEST=emerge-pyro coreboot chromeos-bootimage Change-Id: Id760251a1b037feb62ec43199a145e407b074769 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/17334 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-10mainboard/google/reef: Add support for RECOVERY_MRC_CACHEFurquan Shaikh
1. Add RECOVERY_MRC_CACHE region to reef FMAP. 2. Implement helper function for getting event for recovery mode with memory retraining. 3. Select HAS_RECOVERY_MRC_CACHE. BUG=chrome-os-partner:59352 BRANCH=None TEST=Verified recovery mode behavior with and without memory training request on reef. Change-Id: I91abc9f8122f1aa3980c6372ab557e56a7a92730 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17243 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-09mainboard/google/reef: use common google smbios mainboard versionAaron Durbin
BUG=chromium:663243 Change-Id: Ic78a6aac11a8e842911245c59e8ced7ed2c4e27a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17291 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-09google/pyro: Update WACOM touchscreen ACPI _HIDJanice Li
WACOM request to add a new identifier `WCOMNTN2`, and use that for the board Pyro with all LCD combinations. BRANCH=master BUG=chrome-os-partner:58093 TEST=emerge-pyro vboot_reference coreboot chromeos-bootimage Signed-off-by: Janice Li <janice.li@quantatw.com> Change-Id: I95cf357efba958d7e864d2736d324e0aad70e307 Reviewed-on: https://review.coreboot.org/17257 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-07google/lars: Update DPTF settingsSumeet Pawnikar
After tuning the temperature values for optimal performance, this patch updates few DPTF settings for lars boards. BUG=chrome-os-partner:51025 BRANCH=firmware-glados-7820.B TEST=Built and booted on lars DVT boards. Verified these updated DPTF settings with different workloads. Change-Id: I4c040526c31c3263ed3a9b4cccff3b7a021cfcdb Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://chromium-review.googlesource.com/338877 Reviewed-on: https://review.coreboot.org/17068 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-07mainboard/google/reef: update DMIC related pins configurationSathyanarayana Nujella
CLK_B1(GPIO_80) and DATA_2(GPIO_83) pins needs to be configured as native mode to use them for DMIC record on other potential DMIC's. DMIC blobs configure the clocks. For stereo & quad channel record, both CLK_A1 and CLK_B1 are enabled. For mono channel record, only CLK_A1 is enabled. BUG=chrome-os-partner:56918 BRANCH=None TEST=During DMIC record, check CLK_B1 and DATA_2 lines Change-Id: I838009b85190de5360d593238e48c9593c1dc43a Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/17199 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-04reef: tune trackpad i2c frequency to 400kHzAaron Durbin
This brings the frequency down to 400kHz which is spec for fast i2c. BUG=chrome-os-partner:58889 Change-Id: Ibc5f152e55ed618f18ac6425264f086b1f2d1ffa Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17215 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-04reef: tune tpm i2c frequency to 400kHzAaron Durbin
This brings the frequency down to 400kHz which is spec for fast i2c. BUG=chrome-os-partner:58889 Change-Id: I8689a062b5457aa431eaa7fb688a7170dad83fcf Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17214 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-03google/veyron*: change .ddrconfig from 14 to 3ZhengShunQian
There are two configs, sdram-lpddr3-hynix-2GB.inc and sdram-lpddr3-samsung-2GB-24EB.inc that use .ddrconfig = 14. Changing .ddrconfig from 14 to 3 improves performance especially on contiguous memory accesses. Comparing the .ddrconfig: - if .ddrconfig = 3, C RDRR RRRR RRRR RRRR RBBB CCCC CCCC C--- - if .ddrconfig = 14, C DRBB BRRR RRRR RRRR RRRR CCCC CCCC C--- where - R: indicates Row bits - B: indicates Bank bits - C: indicates Column bits - D: indicates Chip selects bits .ddrconfig = 3 has multiple banks switching which improves DDR timing. BUG=chrome-os-partner:57321 TEST=Boot from fievel and play video BRANCH=veyron Change-Id: Ifdcedc28e84429b8b79c7553b38b667631d29c09 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 93882e4f2000d93c9dae5e6d4b2e1f4b7bc9489e Original-Change-Id: Ic98ebae48609a7604ec678b6bd14dd2b29b669c4 Original-Signed-off-by: ZhengShunQian <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/404691 Original-Commit-Ready: Shunqian Zheng <zhengsq@rock-chips.com> Original-Tested-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17210 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-03google/veyron*: add DDR configs for new samsung DDRZhengShunQian
Add the new samsung DDR configs for all veyron except veyron_rialto: * K4E6E304EB-EGCE, ramid = 0010, 4GB * K4E8E324EB-EGCF, ramid = 1100, 2GB BRANCH=veyron BUG=none TEST=boot fievel board Change-Id: I747aa86f8c93174651a28face63b3386e22b23b3 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 5f55462e71bd481eda85af3d582cfe5b9873cc9c Original-Change-Id: I19123634c994f685683323f7d85cc4d35814e2ab Original-Signed-off-by: ZhengShunQian <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/345748 Original-Commit-Queue: Ren Kuo <ren.kuo@quantatw.com> Original-Reviewed-by: Philip Chen <philipchen@chromium.org> Original-(cherry-pick from cc990f27024255a326fd9fa9644deb28b01a31a7) Original-Reviewed-on: https://chromium-review.googlesource.com/404690 Original-Commit-Ready: Shunqian Zheng <zhengsq@rock-chips.com> Original-Tested-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17209 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-02rockchip/rk3399: display: Do not allocate framebuffer in corebootLin Huang
framebuffer address is dynamically chosen by libpayload now, so there's no need to configure it in coreboot. CQ-DEPEND=CL:401402 BUG=chrome-os-partner:58675 BRANCH=none TEST=Boot from kevin, dev screen is visible Change-Id: I9f1e581d5c63b3579b26be22ce5c8d1e71679f6f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: b3b6675420592c30e1e0abc8f8e9dd6ed5abd04c Original-Change-Id: I7e3162f24a4dc426fe4e10d74865cf0042c80db5 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/401401 Original-Commit-Ready: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17109 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-02rockchip/rk3399: sdram: also prepare the index1 configurationLin Huang
To enable DDR Dynamic Voltage and Frequency Scaling (DVFS) we need to train alternative configurations first, so do the training and store the values. BUG=None BRANCH=None TEST=Boot from kevin Change-Id: I944a4b297a4ed6966893aa09553da88171307a42 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 94533ff3ba21bcb0ace00bedcf0cebb89a341be2 Original-Change-Id: I4a98bc0db5553d154fedb657e35b926a92aa80c7 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/386596 Original-Commit-Ready: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Derek Basehore <dbasehore@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17104 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-01google/eve: Add new boardDuncan Laurie
Add the eve board files using kabylake and FSP 2.0. BUG=chrome-os-partner:58666 TEST=build and boot on eve board Change-Id: I7ca71fe052608d710ee65d078df7af7b55d382bc Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/17177 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-10-28lars/kunimitsu: Add other sensor in _ART for fan controlSumeet Pawnikar
This patch updates the _ART table with other external sensor TSR0 for Fan speed control on Skylake-U based Kunimitsu and Lars boards. Also, updates the temperature values in DPTF policy for better performance. BUG=chrome-os-partner:51025 BRANCH=firmware-glados-7820.B TEST=Built and booted on kunimitsu and lars EVT boards. Verified this updated _ART table on these boards with different workloads. Change-Id: Ib195910c5eb00e004e8b9bd50e266ade3c175be2 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://chromium-review.googlesource.com/332349 Reviewed-on: https://review.coreboot.org/17066 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-28mainboard/google/reef: allow variants to override NHLT OEM stringsAaron Durbin
In certain cases a board variant may need to override the NHLT OEM strings in the main NHLT table. Therefore, provide that path. BUG=chrome-os-partner:56918 Change-Id: I57cc4fd3665698e41ceebb1949180f86bb60b61f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17167 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
2016-10-28mainboard/google/reef: update comment for DMIC config usageAaron Durbin
Going forward GPIO_17 is used to determine the configuration of the board w.r.t. the number of DMICs on the board. BUG=chrome-os-partner:56918 Change-Id: I03edb880e0649977030c1b87219ebebac631a519 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17163 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-27mainboard/google/reef: drop disabling periodic training for micronAaron Durbin
In anticipation of getting fixed material remove the disabling of periodic training for MT53B512M32D2NP and MT53B256M32D1NP. BUG=chrome-os-partner:59003 Change-Id: Iaadaa979d85cab78dda527db7480420af02fd832 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17130 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-27mainboard/google/reef: clarify memory part number detailsAaron Durbin
Explain the reasoning for the part_num strings used in the memory SKU table explaining the necessity of keeping mosys in sync with the strings used. It's possible that actual part numbers could change as the higher speed material gets cheaper, for example. BUG=chrome-os-partner:58966 Change-Id: If895e52791dc56e283261b3438106116b8b2ea05 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17129 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-10-27skylake: Use COMMON_FADTDuncan Laurie
Remove the FADT from the individual mainboards and select and use COMMON_FADT in the SOC instead. Set the ACPI revision to 5. Change-Id: Ieb87c467c71bc125f80c7d941486c2fbc9cd4020 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/17138 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-10-26google/reef/variants/pyro: Use WCOM Touchscreen driverFurquan Shaikh
BUG=chrome-os-partner:57846 Change-Id: Ibd3ef8cebcf99ee2186dfed98b04373dd17e798e Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17093 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins)
2016-10-25google/oak: Add derivative board HanaYidi Lin
CQ-DEPEND=CL:379684 BUG=chrome-os-partner:58064 TEST=verified on hana rev0 Change-Id: Icd076dcaf07a97f3b83b428b9619e8a4dafe744d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 7c483951a0dcd419735fffb79e6187f9ca3b08a8 Original-Change-Id: I9d886abf15931496ac61e8fd38d7fd306f2a1bf7 Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/379504 Original-Commit-Ready: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Philip Chen <philipchen@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17107 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-25rockchip/rk3399: gru/kevin: drop unused sdram configsLin Huang
There are some sdram configurations that are no longer used. Drop them. BUG=None BRANCH=None TEST=None Change-Id: Ib6d2d58c3071147a3095bc1ed7fa7b02c748e1a5 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 111d375005ec6a3b91e47acdd676e8f1644c931c Original-Change-Id: I5f9278093f02e785b2894faa8e8cf09ecec20325 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/399122 Original-Commit-Ready: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17103 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-25rockchip/rk3399: reset system if DDR init failsLin Huang
We found sdram may fail in pctl_cfg(), so we check the status in this function. If it exceeds 100ms still in this function, we will restart the system. We also found there are rare chances DDR training fails, so also restart system in that case. BUG=chrome-os-partner:57988 BRANCH=None TEST=coreboot resets on failure and eventually the system comes up Change-Id: Icc0688da028a8f4f81eafe36bbaa79fdf2bcea74 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 89e45f8352f62e19a203316330aba14ccc5c8b11 Original-Change-Id: If4e78983abcfdfe1e0e26847448d86169e598700 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/397439 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17045 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-25mainboard/google/reef: Add PowerResource for ELAN touchscreenFurquan Shaikh
Define reset_gpio and enable_gpio for touchscreen device so that when kernel puts this device into D3, we put the device into reset. PowerResource _ON and _OFF routines are used to put the device into D0 and D3 states. BUG=chrome-os-partner:55988 Change-Id: Ia905f9eb630cd96767b639aec74131dbd7952d0e Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17083 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-10-20mainboard/google/reef: add snappy variantWisley Chen
Create the initial Snappy variant which refers to the Reef device. Snappy, an Apollolake-platform, is deviated from reference board Reef. BRANCH=master BUG=None TEST=Built & booted Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Change-Id: I6f32c0b1a154edbd8c4822acdbdbdbeb4a0098e6 Reviewed-on: https://review.coreboot.org/17043 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-10-18mainboard/google/reef: Configure PERST pin for reef DVTVaibhav Shankar
Configure GPIO 122 as PERST on DVT. This is to assert WiFi PERST during s0ix entry. BUG=chrome-os-partner:55877 TEST=S0ix functional on DVT Signed-off-by: Venkateswarlu Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Change-Id: Iab18b2de621a1a9226c78493f6defa15081db875 Reviewed-on: https://review.coreboot.org/17030 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-10-16mainboard/google/reef: Set PL1 override to 12000mWVenkateswarlu Vinjamuri
Reef is using APL SoC SKU's with 6W TDP max. We've done experiments and found the energy calculation is wrong with the current VR solution. Experiments show that SoC TDP max (6W) can be reached when RAPL PL1 is set to 12W. Therefore, we've inserted 12W override after reading the fused value (6W) so that the system can reach the right performance level. BUG=chrome-os-partner:56922 TEST=webGL performance(fps) not impacted before and after S3. Signed-off-by: Venkateswarlu Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Change-Id: I21c278e82b82d805f6925f4d9c82187825fd0aa0 Reviewed-on: https://review.coreboot.org/17029 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-10-10google/reef: update timing of sdmode togglingSathyanarayana Nujella
Maxim98357a speaker amp requires BCLK & SFRM to be active and stable before it is unmuted. If there is a BLCK and no SFRM, it results in a pop sound. sdmode_delay property already exists which facilitates this configuration. This patch updates "sdmode_delay" to avoid pop sound. BUG=chrome-os-partner:58356 BRANCH=None TEST=while audio playback via headset, remove headset. Audio will be switched playback to speaker. Observe if pop sound comes from speaker. Change-Id: I7ad68caa88d7b3ff52ac1379fe6564de27d97777 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/16933 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-10-08google/oak: Increase the driving strength for 4GB DRAMsPH Hsu
Some PVT units encountered DRAM calibration failure during power on/off tests. The failure is caused by higher impedance of the DRAM on those units. So increase the driving strength for 4GB DRAMs. BUG=chrome-os-partner:57392 TEST=run cold reboot 100 times on PVT units which have DRAM calibration issue. Change-Id: I8a329093db3f1def566e4b7afec3c4f4bfe44c6a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: cf1aa5ade856af433fa056f51a20d18553ae241d Original-Change-Id: I0d1776cd1a5892d1f82e9bf414620d1ef6d29132 Original-Signed-off-by: PH Hsu <ph.hsu@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/394451 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Pin-Huan Hsu <ph.hsu@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/16917 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-08google/gru: Add USB 2.0 PHY tuning for Kevin PHY0 and PHY1William wu
We found that Kevin board PHY0 and PHY1 eye-diagram margin is not enough to make compliance test pass, and the PHY0 USB SI is worse than PHY1, because of the higher PCB impedance. For PHY0, we can't improve the eye-diagram by SW PHY tuning, so we need to reduce the RBIAS resistance from 133 ohm to 115 ohm, it can help to increase the eye-height. For PHY1, we can improve the eye-diagram by setting the max pre-emphasis level. And after the above change, the USB2 signal amplitude will become larger at the test point near to SOC USB2 PHY, in order to avoid mis-trigger the disconnect detection (650mV), we need to disable pre-emphasize in eop state. BRANCH=None BUG=chrome-os-partner:53863 TEST=do USB 2.0 compliance test for Kevin C0 and C1 port. Change-Id: I95c0acd79623aeca9a0ae077b1dd3836d91fe561 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: de3cdef128966d76e7d8e2ebd641763b911c3ad5 Original-Change-Id: I00cb325b9938e4276cc77b5d6f5faa7023379608 Original-Signed-off-by: William wu <wulf@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/390615 Original-Commit-Ready: Julius Werner <jwerner@chromium.org> Original-Tested-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16911 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-07google/reef/variants/pyro: Add support for GPIO output polarityMartin Roth
commit 028200f7 - x86/acpi_device: Add support for GPIO output polarity updated ACPI_GPIO_OUTPUT to ACPI_GPIO_OUTPUT_ACTIVE_HIGH for the other boards that needed it, but pyro wasn't in the tree when it was initially pushed. Now that pyro is in the tree, it needs to be updated as well. Change-Id: I617999b06ee584e0543d7ae3232bb2be2ff7429c Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16930 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2016-10-07src/mainboard: Remove whitespace after sizeofElyes HAOUAS
Change-Id: Ie2a047d35e69182812c349daedc5b3b5fde20122 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16860 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-07src/mainboard: Remove unnecessary whitespaceElyes HAOUAS
Change-Id: I35cb7e08d5233aa5a3dbb4631ab2ee4dc9596f98 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16849 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-07x86/acpi_device: Add support for GPIO output polarityFurquan Shaikh
Instead of hard-coding the polarity of the GPIO to active high/low, accept it as a parameter in devicetree. This polarity can then be used while calling into acpi_dp_add_gpio to determine the active low status correctly. BUG=chrome-os-partner:55988 BRANCH=None TEST=Verified that correct polarity is set for reset-gpio on reef. Change-Id: I4aba4bb8bd61799962deaaa11307c0c5be112919 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/16877 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-10-07google/gru: drive WLAN_MODULE_RST# low as early as possibleBrian Norris
GPIO1_B3 (WLAN_MODULE_RST#) defaults as a pull-up input, but it is also "pulled up" by 1.8V_WLAN. However, 1.8V_WLAN remains low for some time during early boot. This leaves the signal floating somewhere in the middle. This has two potential issues: (1) we're leaking some power for some (hopefully) short period of time (2) we are possibly screwing with the Wifi power sequence; we aren't supposed to deassert PDn (i.e., MODULE_RST#) until all the rails have fully ramped for some period of time Neither of the above issues are likely to be significant, but it is nice to fix, I expect. BRANCH=gru BUG=chrome-os-partner:54026 TEST=measure WLAN_MODULE_RST# on scope at boot time Change-Id: Ia6af9ad6954ad8feeda33015e3f205842380939e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 0e890a2787bf034d3358a33fc88c2dd8078593ab Original-Change-Id: I120e26ad0ca486a326874986e142dcaee965b62d Original-Signed-off-by: Brian Norris <briannorris@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/388009 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16882 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-07google/gru: set W2W_DIFFCS_DLY to 5Lin Huang
PHY_PER_CS_TRAINING is being enabled when DDR frequency >= 666. For per cs training, the controller should consider the PHY delay line switch time and there should be more cycles to switch the delay line, so update the W2W_DIFFCS_DLY_ value from 0x1 to 0x5. BRANCH=none BUG=chrome-os-partner:56940 TEST=do memtester on kevin board, and pass Change-Id: I00df2d4724b0b77f3e7565809fb35bbd2ff01ea5 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: c135ea3e33d810ed322d947eb8d512d1ac119cfc Original-Change-Id: I81b99cbc085769b7028e770509d79bd8d550820b Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/387506 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Derek Basehore <dbasehore@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16721 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-07google/gru: pass apio number to arm-trust-firmwareLin Huang
To save power when entering suspend, gpios 2 to 4 need to be set to input and 'pull none' mode. Pass the APIO configuration to ATF so it can do a proper job here. BRANCH=None BUG=chrome-os-partner:56423 TEST=run suspend_stress_test on kevin board Change-Id: Id57fe8f622ae3f9c2bc7e58be89518b2b846cd37 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 9c42082d1ca9a6baa735821382d3e83c1f8dc9ad Original-Change-Id: Iaf441e8e34c5591ffe7c65f6533fcf0b733ff5ac Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/378475 Original-Commit-Ready: Caesar Wang <wxt@rock-chips.com> Original-Tested-by: Caesar Wang <wxt@rock-chips.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16720 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-07google/gru: pass the gpio power supply enable pin to bl31Lin Huang
We need to disable some regulators when the device goes into suspend. This means that we need to pass some gpios to bl31, and disable these gpios when bl31 runs the suspend function. BRANCH=None BUG=chrome-os-partner:56423 TEST=enter suspend, measure suspend gpio go to low [pg: also update arm-trusted-firmware to match] Change-Id: Ia0835e16f7e65de6dd24a892241f0af542ec5b4b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 0f3332ef2136fd93f7faad579386ba5af003cf70 Original-Change-Id: I03d0407e0ef035823519a997534dcfea078a7ccd Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/374046 Original-Commit-Ready: Caesar Wang <wxt@rock-chips.com> Original-Tested-by: Caesar Wang <wxt@rock-chips.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16719 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-07mainboard/google/reef: add pyro variant.Kevin Chiu
Create the initial Pyro variant which refers to the Reef. Pyro is APL Chrome board that deviate from reference board Reef. BRANCH=master BUG=None TEST=Build Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Change-Id: I9beed1f6895e8891d3d51b563edfe172f566718b Reviewed-on: https://review.coreboot.org/16855 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-10-06rockchip: rk3399: improve write leveling flowJianqun Xu
To improve sdram 800MHz and 933MHz stability, we need to modify write leveling flow to get the proper write leveling value. BUG=chrome-os-partner:56940 BRANCH=none TEST=Boot from kevin on 933MHz, and do stressapptest Change-Id: I5b24c93d4a57917fb9af7e5e2a95d8423ccbaa7e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d84bf25b3e5de373c7913e6d534a810cb984b3fd Original-Change-Id: I87efddf628c3683fcb85d6875e029cf3cbc482be Original-Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Original-Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/384292 Original-Commit-Ready: Julius Werner <jwerner@chromium.org> Original-Tested-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16716 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-06google/gru: Shrink RW_ELOG region to 4KBJulius Werner
Since there's currently a limitation in coreboot's code that prevents more than 4KB to be used by the eventlog anyway, this patch shrinks the available RW_ELOG area in the FMAP for Gru down to 4KB. This may prove prudent later if we ever resolve that limitation, so that tools can rely on the area in the FMAP being the same as the area actually used by the read-only firmware code on these boards. BRANCH=gru BUG=chrome-os-partner:55593 TEST=Booted Kevin, confirmed that eventlog got written normally. Ran a reboot loop to exhaust eventlog space, confirmed that the shrink code kicks in as expected before reaching 4KB. Change-Id: I3c55d836c72486665a19783fe98ce9e0df174b6d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 05efb82ca00703fd92d925ebf717738e37295c18 Original-Change-Id: Ia2617681f9394e953f5beb4abf419fe8d97e6d3e Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/384585 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Simon Glass <sjg@google.com> Reviewed-on: https://review.coreboot.org/16715 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-06rockchip: rk3399: improve sdram noc timingLin Huang
sdram noc timing will affect ddr latency, this patch improves rk3399 sdram noc timing so improve memory performance. BRANCH=gru BUG=chrome-os-partner:57248 TEST=Boot from kevin board Change-Id: I09e984490a7ad747ef8abfc6542d0e2c95ec19bc Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 43dfe55d713d371e39d21312772fd353614b7642 Original-Change-Id: I393e74ecdeb72930ac38ae9bcf311e5654f65162 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/382725 Original-Reviewed-by: Sonny Rao <sonnyrao@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Tested-by: Sonny Rao <sonnyrao@chromium.org> Original-Commit-Queue: Sonny Rao <sonnyrao@chromium.org> Reviewed-on: https://review.coreboot.org/16713 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-06rockchip/rk3399: lower kevin board sdram frequency to 800MHzLin Huang
We found some boards are not stable when sdram is run at 933Mhz. Before we can fix it, we need to lower the sdram frequency to 800MHz. In this patch we modify the DQS delay from 0x280 to 0x260 and extend the DQS window. BRANCH=None BUG=chrome-os-partner:56940 TEST=Booted Kevin. Change-Id: I68561c4aa4d9ab66acfa3515a42d696157aff759 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 877a7f6ad22a5bde9f9e458bcb65f133f2f001bd Original-Change-Id: I5eab6bbe96f0dae095c5353403292022e7a25421 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/382724 Original-Commit-Ready: Douglas Anderson <dianders@chromium.org> Original-Tested-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/16709 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-06google/veyron_rialto: Add lpddr3-K4E6E304EB-2GB-1CH memory configurationJeffy Chen
Add lpddr3-K4E6E304EB-2GB-1CH memory configuration for rialto. BUG=chrome-os-partner:56759 BRANCH=none TEST=Build Change-Id: I698fe450d48b64a06232aa44ecf91d688d9dc17a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d3edecdb135939c3264ab1b831e7821d3a3e0149 Original-Change-Id: I7dae9fd822abeff5b08de0ab9262e1817ac58531 Original-Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/380443 Original-Commit-Ready: Alexandru Stan <amstan@chromium.org> Original-Tested-by: Alexandru Stan <amstan@chromium.org> Original-Reviewed-by: Alexandru Stan <amstan@chromium.org> Original-Reviewed-by: Jonathan Dixon <joth@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16699 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-10-06rockchip/rk3399: Move big CPU cluster initialization into ramstageJulius Werner
This patch moves the big CPU cluster initialization on the RK3399 from the clock init bootblock function into ramstage. We're only really doing this to put the cluster into a sane state for the OS, we're never actually taking it out of reset ourselves... so there's no reason to do this so early. Also cleaned up the interface for rkclk_configure_cpu() a bit to make it more readable. BRANCH=None BUG=chrome-os-partner:54906 TEST=Booted Kevin. Change-Id: I568b891da0abb404760d120cef847737c1f9e3ec Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: bd7aa7ec3e6d211b17ed61419f80a818cee78919 Original-Change-Id: Ic3d01a51531683b53e17addf1942441663a8ea40 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/377541 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/16698 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-04google/gru: Ensure correct pull resistors for special-function pinsJulius Werner
Several of the special function pins we're using in firmware have a pre-assigned pull-up or pull-down on power-on reset. We don't want those to interfere with any of the signaling we're trying to do on those pins, so this patch disables them. Also do some house-cleaning to group the bootblock code better, and change the setup code for all SPI and I2C buses to first initialize the controller and then mux the pins... I assume this might be a little safer (in case the controller peripheral has some pins in a weird state before it gets fully initialized, we don't want to mux it through too early). BRANCH=None BUG=chrome-os-partner:52526 TEST=Booted Kevin. Change-Id: I4d5bd3f7657b8113d90b65d9571583142ba10a27 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f8f7fd56e945987eb0b1124b699f676bc68d0560 Original-Change-Id: I6bcf2b9a5dc686f2b6f82bd80fc9a1a245661c47 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/382532 Reviewed-on: https://review.coreboot.org/16711 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-04gru: Increase SPI speed to 33MHzSimon Glass
Increase the SPI bus speed to speed up boot time. The maximum supported speed at 1.8V is 37.5MHz, and 33MHz is the next lowest convenient speed, given the clock parents. BUG=chrome-os-partner:56556 BRANCH=none TEST=boot on gru and see that things still work correctly. Total time spent on reading from SPI reduces from 185ms to 141ms. Change-Id: I71436c9e343b18360fa63d528dea5cfcfbc831e6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d7576f6e53e407af61160be142c3d589e864a8cf Original-Change-Id: I55a19f523817862e081d23469e94fd795456dd67 Original-Signed-off-by: Simon Glass <sjg@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/381313 Original-Commit-Ready: Julius Werner <jwerner@chromium.org> Original-Tested-by: Simon Glass <sjg@google.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16708 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-04google/gru: Init the PWM pinmux after setting up the PWMDouglas Anderson
If we setup the PWM _after_ the pinmux then there's a period of time when we're driving the PWM incorrectly. Let's setup the regulator and _then_ configure the pinmux. This fixes no known bugs, but it is more correct and probably makes the signals look better at bootup. BRANCH=None BUG=None TEST=scope Change-Id: I311c0eded873b65e0489373e87b88bcdd8e4b806 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: fcf4d0ba29d82cce779c0b25ead36de4a95d97a1 Original-Change-Id: I5124f48d04a18c07bbd2d54bc08ee001c9c7e8d1 Original-Signed-off-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/381592 Original-Reviewed-by: Simon Glass <sjg@google.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16700 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-04src/mainboard: Remove unnecessary semicolonElyes HAOUAS
Change-Id: Iab0c7c470a3105b5df7b6b74aebdd1329e7f93ba Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16859 Tested-by: build bot (Jenkins) Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2016-10-03google/gale: Remove #ifdef of Kconfig bool symbolMartin Roth
Kconfig symbols of type bool are ALWAYS defined, so this code was always being included and run, which isn't what the author wanted. Change to use IS_ENABLED(), and a regular if() instead of an #ifdef. Change-Id: I72623fa27e47980c602135f4b73f371c7f50139b Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16837 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-10-03google/gale/Kconfig: Change wording of Kconfig optionMartin Roth
Everybody knows WHAT they're supposed to do with options, so the text "Pick this" or "Select to" are redundant. Change-Id: I327c5be755373e99ca0738593bd78e1084d4d492 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16838 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-10-02Kconfig: Update default hex values to start with 0xMartin Roth
Kconfig hex values don't need to be in quotes, and should start with '0x'. If the default value isn't set this way, Kconfig will add the 0x to the start, and the entry can be added unnecessarily to the defconfig since it's "different" than what was set by the default. A check for this has been added to the Kconfig lint tool. Change-Id: I86f37340682771700011b6285e4b4af41b7e9968 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16834 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-10-01mainboard/google/reef: Update DPTF policy temp. values for CPUSumeet Pawnikar
This patch increases the CPU specific passive temp. trip point and critical temp. trip point value for DPTF policy. BUG=chrome-os-partner:57903 TEST=Built, booted on reef and verified this passive and critical temp. trip points with heavy workload. Change-Id: I2a38d01a6539c1bd478f8716c4b543ebcd1f2080 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/16766 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Venkateswarlu V Vinjamuri <venkateswarlu.v.vinjamuri@intel.com>
2016-10-01mainboard/google/reef: unconditionally set MAINBOARD_FAMILYAaron Durbin
For all mainboard variants use the "Google_Reef" family by default which is populated in SMBIOS tables. A variant can provide their own value if needed, but "Google_Reef" can reside as the family without having to add conditions for each variant when MAINBOARD_FAMILY have to be overridden. BUG=chrome-os-partner:56677 Change-Id: Ic214eae1e6473b32f4cb442c09c34355357e1257 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16813 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-09-30google/reef: Fix default values in KconfigMartin Roth
These default values weren't being set with the default keyword so were ending up with different values. from the default generated config file before this change: CONFIG_DRIVER_TPM_I2C_BUS=0x9 CONFIG_DRIVER_TPM_I2C_ADDR=0x2 CONFIG_DRIVER_TPM_I2C_IRQ=-1 Change-Id: I19514d0c9b2a9b7e479f003a4d3384e073f4d531 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16828 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-30Kconfig: Prefix hex defaults with 0xMartin Roth
Because these variables had "non-hexidecimal" defaults, they were updated by kconfig when writing defconfig files. Change-Id: Ic1a070d340708f989157ad18ddc79de7bb92d873 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16827 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-30mainboard/google/stout/romstage.c: Use tabs for indentsElyes HAOUAS
Change-Id: I2402648b8c0b9dcc730ce7f099e1e4ccef3b79fc Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16814 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-28google/reef: Mark touchpad and touchscreen as probed devicesDuncan Laurie
Add the 'probed' flag to the touchpad and touchscreen devices so they are probed by the kernel before being loaded, in case they do not exist or are replaced with another vendor. BUG=chrome-os-partner:57686 Change-Id: I0a61964e6874cd99fab0c21fa404a43548fc8ab5 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16743 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-26mainboards,ec: provide common declaration for mainboard_ec_init()Aaron Durbin
Add a header file to provide common declarations that the mainboards can use regarding EC init. BUG=chrome-os-partner:56677 Change-Id: Iaa0b37eff4de644e969a18364713b90b7f27fa1c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16734 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins)
2016-09-26mainboards/google/reef: use chromeec's ASL lid switch implementationAaron Durbin
Defer to the lid switch implementation provided by the chromeec. BUG=chrome-os-partner:56677 Change-Id: Ida451dc29c8cf55fb88015e48a9e0bca3740f645 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16733 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-09-26soc/intel/apollolake: provide power button ACPI deviceAaron Durbin
Instead of having each mainboard provide the power button, uncondtionally provide the power button ACPI device on behalf of each mainboard. BUG=chrome-os-partner:56677 Change-Id: I94c9e0353c8d829136f0d52a356286c6bedcddd5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16731 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-21google/enguarde: Adapt to current treePatrick Georgi
Some changes were made in upstream in the meantime that broke the build: - CHROMEOS_VBNV_CMOS was renamed to VBOOT_VBNV_CMOS - recovery_move_enabled() -> vboot_recovery_mode_enabled() - chromeos.asl was replaced by an acpi generator Change-Id: Icd4ed5111cce9db79e12efb0cb7e898bba725c20 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/16683 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-09-21google/enguarde: Upstream Lenovo N21 ChromebookMatt DeVillier
Migrate google/enguarde (Lenovo N21 Chromebook) from Chromium tree to upstream, using google/rambi as a reference. original source: branch firmware-enguarde-5216.201.B commit cf1f57b [Enguarde: Adjust rx delay for norm.] TEST=built and booted Linux on enguarde with full functionality blobs required for working image: VGA BIOS (vgabios.bin) firmware descriptor (ifd.bin) Intel ME firmware (me.bin) MRC (mrc.elf) external reference code (refcode.elf) Change-Id: I3ccda29d1e095d8b1b36766cda913172f72233a7 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/15444 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-21mainboard/google/reef: Enable cr50 TPM interruptDuncan Laurie
Enable the cr50 TPM and interrupt as GPE0_DW1_28 for use during verstage. The interrupt is left in APIC mode as the GPE is still latched when the GPIO is pulled low. BUG=chrome-os-partner:53336 Change-Id: Ib0247653bdcbaccb645cd16b81d7ec3c38f669af Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16673 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-21Makefiles: update cbfs types from bare numbers to valuesMartin Roth
These values are found in util/cbfstool/cbfs.h. Change-Id: Iea4807b272c0309ac3283e5a3f5e135da6c5eb66 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16646 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-20src/mainboard/getac - kontron: Add space around operatorsElyes HAOUAS
Change-Id: If3cdfdff60c92e3427f1b285e2bca92e2bb2a1cb Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16640 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-20gru/kevin: Decrease voltage for little cpu 1.5G to 1.15vShunqian Zheng
In kernel side we set 1.1v for 1.5G, even for coreboot RO, a higher voltage could be safer, 1.2v now seems too high. BRANCH=none BUG=chrome-os-partner:56948 TEST=bootup Change-Id: I852e0d532369aad51b12770e2efb01aacf6662ce Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 000b5c099373be2a1f83c020ba23a0e79ea78fab Original-Change-Id: Iecc620deee553c61a330353ac160aa3a36f516df Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/380896 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16583 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-20Veyron: Increase bit-per-pixel to 32Daisuke Nojiri
This enhances gradation of some icons on vboot screens. BUG=chrome-os-partner:56056 BRANCH=none TEST=Booted Jerry Change-Id: Ia19d585b69e7701040209e8bf0b8a6990a166c95 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 4e7a42c999673ebd89c5b30845a4a5ec93852166 Original-Change-Id: I126cb7077c834e1a8b0a625a592dce8789b5876c Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/376884 Reviewed-on: https://review.coreboot.org/16581 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-20google/gru: Fix up PWM regulator rangesJulius Werner
We did yet another small adjustment to the PWM regulator ranges for Kevin rev6... this patch reflects that in code. Also rewrite code and descriptions to indicate that these new ranges are not just for Kevin, but also planned to be used on Gru rev2 and any future Gru derivatives (which as I understand it is the plan, right?). BRANCH=None BUG=chrome-os-partner:54888 TEST=Booted my rev5, for whatever that's worth... Change-Id: Id78501453814d0257ee86a05f6dbd6118b719309 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 4e8be3f09ac16c1c9782dee634e5704e0bd6c7f9 Original-Change-Id: I723dc09b9711c7c6d2b3402d012198438309a8ff Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/379921 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/16580 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-20Gru: Increase bit-per-pixel to 32Daisuke Nojiri
This enhances gradation of some icons on vboot screens. BUG=chrome-os-partner:56056 BRANCH=none TEST=Booted kevin-tpm2 Change-Id: I2fc943f89386ccc6cd9293f5811182a5a51d99b0 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: bb1f0fb00d023c045305edc6c9fc655b764a4e8c Original-Change-Id: Ieb61830b9555da232936087cdcf7c61a1e55bab4 Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/376883 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16579 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-20gru: Add watchdog reset supportJulius Werner
This patch adds support to reboot the whole board after a hardware watchdog reset, to avoid the usual TPM issues. Work 100% equivalent to Veyron. From my tests it looks like both SRAM and PMUSRAM get preserved across warm reboots. I'm putting the WATCHDOG_TOMBSTONE into PMUSRAM since that makes it easier to deal with in coreboot (PMUSRAM is currently not mapped as cached, so we don't need to worry about flushing the results back before reboot). BRANCH=None BUG=chrome-os-partner:56600 TEST='stop daisydog; cat > /dev/watchdog', press CTRL+D, wait 30 seconds. Confirm that system reboots correctly without entering recovery and we get a HW watchdog event in the eventlog. Change-Id: I317266df40bbb221910017d1a6bdec6a1660a511 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 3b8f3d064ad56d181191c1e1c98a73196cb8d098 Original-Change-Id: I17c5a801bef200d7592a315a955234bca11cf7a3 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/375562 Original-Commit-Queue: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/16578 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-19Revert "mainboard/google/reef: Enable cr50 TPM interrupt"Duncan Laurie
This reverts commit 24de342438208d9b843e87627f15b9a272285b0f.
2016-09-19mainboard/google/reef: Enable cr50 TPM interruptDuncan Laurie
Enable the cr50 TPM and interrupt as GPE0_DW1_28 for use during verstage. The interrupt is left in APIC mode as the GPE is still latched when the GPIO is pulled low. BUG=chrome-os-partner:53336 Change-Id: I28ade5ee3bf08fa17d8cabf16287319480f03921 Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-20gru: Add USB 2.0 PHY tuning for KevinJulius Werner
This patch sets some magic number in magic undocumented registers that are rumored to make USB 2.0 signal integrity better on Kevin. I don't see any difference (unfortunately it doesn't solve the problems with long cables on my board), but I guess it doesn't hurt either way. BRANCH=None BUG=chrome-os-partner:56108,chrome-os-partner:54788 TEST=Booted Kevin with USB connected through Servo. Seems to have roughly the same failure rate as before. Change-Id: If31fb49f1ed7218b50f24e251e54c9400db72720 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 0c5c8f0f80ea1ebb042bcb91506a6100833e7e84 Original-Change-Id: Ifbd47bf6adb63a2ca5371c0b05c5ec27a0fe3195 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/370900 Original-Reviewed-by: Guenter Roeck <groeck@chromium.org> Original-Reviewed-by: David Schneider <dnschneid@chromium.org> Reviewed-on: https://review.coreboot.org/16265 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-19mainboard/google/reef: Configure WLAN as wake sourceVaibhav Shankar
This implements PRW method for WLAN and configures PCIe wake pin to generate SCI. BUG=chrome-os-partner:56483 TEST=Suspend the system into S3 or S0ix. System should resume through wake event from wifi. Change-Id: I9bd078c2de19ebcc652b5d981997d2a5b5f0b1b7 Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com> Reviewed-on: https://review.coreboot.org/16611 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-15mainboard/reef: add variant support to ASL codeAaron Durbin
There are certain board-specific options for reef variants. The big one is the DPTF settings. Rearrange the ASL files such that dsdt.asl is the main landing area. The ACPI options for Chrome EC are contained in the variant/ec.h header so the actual code #includes can just reside in dstd.asl. Since most of the mainboard specific peripherals are auto generated by the acpigen from devicetree there's no real separate need for mainboard.asl. The one thing not addressed in this CL is the notion of a variant having the Chrome EC or not (along with lid, etc). Future indirection can be provided when needed to address that requirement. BUG=chrome-os-partner:56677 Change-Id: I5c888f5fc64913dcff010c28f87e69ac5449e6b6 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16604 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-15google/reef: Remove setting of GPIO_TIER1_SCI enable bitShaunak Saha
This patch removes setting of gpio_tier1_sci_en from mainboard smihandler code. Gpio_tier1_sci enable bit is set from gpio.asl now. BUG=chrome-os-partner:56483 TEST=System resumes from S3 on lidopen, powerbutton and USB wake. Also from S0iX system is resuming for WIFI wake. Change-Id: I26fd3fd9fcc83c988bcff1bda4da7a2e3da98ce6 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/16566 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-14mainboards/apollolake: Set RAPL power limit PL1 value to 12W.Sumeet Pawnikar
This patch sets tuned RAPL power limit PL1 value to 12W in acpi/dptf.asl for RAPL MSR register. With PL1 as 12W for WebGL and stream case, we measured SoC power reaching upto 6W. Above 12W PL1 value, we observed that Soc power going above 6W. With PL1 as 12W, system is able to leverage full TDP capacity. BUG=chrome-os-partner:56524 TEST=Built, booted on reef and verifed the package power with heavy workload. Change-Id: I8185ce890f27e29bc138ea568af536bc274fe7b8 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/16596 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-14mainboard/google/reef: Configure PERST_0 pinVaibhav Shankar
This configures PERST_0 in devicetree. For boards without PERST_0, the pin should be disabled. For boards with PERST_0 the correct GPIO needs to be assigned. BUG=chrome-os-partner:55877 Change-Id: I705009b480e02b4c9b2070bb4f82cb4d552e9a46 Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com> Reviewed-on: https://review.coreboot.org/16603 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)